Step by Step Instructions
|
|
- Diane Nichols
- 6 years ago
- Views:
Transcription
1 Step by Step Instructions NZW36 1-Channel Smart Outlet Step 1 Gather Your Materials & Find an Appropriate Outlet Materials Needed: Grounded Outlet Cell Phone or Tablet Wink HUB 1.0 or 2.0 Locate an indoor outlet which is grounded and within the recommended distance (less than 30ft) from your Z-Wave Hub/Gateway. Walls, furniture, and other obstructions may affect the communication between the Plug-In Module and your Hub/Gateway, so please keep this in mind when selecting your location.
2 -Step 2- Plug In Lamp(s)/Appliance(s) Before plugging in your module, please plug in the device(s) you are looking to control. In addition, make sure that both devices together do not equal more than 15 Amps. The always-on outlet (non-smart) can handle 15 Amps, while the Z-Wave smart outlet can handle 10 Amps So, if you have something that s 10 Amps in the always-on outlet, you can only use something that s 5 Amps in the Smart Outlet. Note: It is not recommended plugging in space (electric) heaters, or any other appliances that may present a hazardous condition due to unattended, unintentional, or automatic power control. -Step 3- Plug In the Module & Exclude (Optional But Highly Recommended) You are now ready to plug in your module and start to sync to your Wink HUB. Before we start the official pairing (including) process, we are going to go over how to exclude a device. This step is optional, but we like to do it with any new Z-Wave device we get/test, just to make sure. The excluding process is like a reset, and it s helpful if you bought the device used, or if there is an issue with your HUB/Gateway. Plus, it doesn t hurt!
3 IMPORTANT: Before beginning, make sure you can see your HUB from where you are standing (you can move the device later). Excluding Steps: Open up your Wink app and go to the main menu Click on the, Hubs icon Once on the, Hubs menu, click on the three dots on top right of your screen to access the, Settings menu Select the Hub you eventually want to pair your device to Scroll down about halfway and select, Z-Wave Controls REMINDER: Please make sure you can see your Hub from where you are excluding your device from to ensure the exclusion process works While watching your HUB, click on, Exclusion Mode you should see your HUB flashing Push on the Middle Button on the front of your NZW times within 3 seconds If successful, your HUB should stop flashing and turn GREEN. If it does not turn green, then please continue to try to exclude. **If you are having issues excluding your device, try excluding the device directly next to the HUB. This will solve 95% of all problems you may have when excluding** -Step 4- Adding (Including) to the Network & Completing the Setup Process Once you ve finished the Exclusion Process (or if you ve skipped it) it s time to include your Z-Wave device to your network. Including Steps: If you ve excluded, press the back button (<) on the top left of your screen, then the three dots on the top left On the HUBS screen, click, Add a Product underneath the picture of the HUB Scroll down about halfway and press, Lights
4 Scroll down to the very bottom and press, ZWave Switch Press, Next where it says to, Refer to the product manual since you will not need it if you are following these directions! On the, Select HUB screen, select your HUB of choice (if you have multiple) and click, Next Click, Next again Click, Connect Now and your HUB will start flashing While your HUB is flashing, press the Middle Button on the front of your NZW times within 3 seconds If successful, your HUB will flash GREEN and your phone will say, Success Congratulations, you now have a remote controlled smart plug! IMPORTANT: It is important to note what color the HUB turns when flashing. Sometimes Wink will throw an error on the screen that says, This is taking longer than expected. If your HUB turns GREEN and you still get this error, just close out of your Wink App and reopen and the switch should be there (give it a few seconds). -Device Removal- Removing Your Smart Plug From SmartThings Please follow the below directions to remove your smart plug from your Wink HUB. (NOTE: this is the same process for Wink HUB s 1.0 & 2.0) Removal Steps: From the, Lights menu, please click on the three dots on the top right of the screen
5 Next, select the light/switch you d like to remove under the, Lights section Scroll down to the bottom and select, Remove Light and tap, Remove on the popup Continue to press, Next until you reach the, Disconnect Now screen Make sure you can see your HUB (this is optional, but helpful) and once ready, press, Disconnect Now Your HUB will begin flashing BLUE Press the Middle Button on the front of your NZW times within 3 seconds o o If successful, your HUB will flash GREEN If unsuccessful, your HUB will flash RED if this happens, please move the plug closer to the HUB and try again Your smart plug should now be removed from the Wink HUB. If you want to re-pair/include the plug again, you ll want to Exclude (Step 3) it again. **If you are having issues removing your device, try removing the device directly next to the HUB. This will solve 95% of all problems you may have when removing** Any questions/issues, please reach out to: contact@inovelli.com or visit our troubleshooting page at:
PowerView Motorisation
PowerView Motorisation Smart shades that simplify your life Scene Quickstart guide A brilliant evolution in The Art of Window Styling. This guide will help getting you started with your Powerview purchase.
More informationInstallation guide. Activate. Install your Broadband. Install your Phone. Install your TV. 1 min. 30 mins
Installation guide 1 Activate Install your Broadband Install your TV 4 Install your Phone 1 min 0 mins 0 mins 5 mins INT This guide contains step-by-step instructions on how to: 1 Activate Before we do
More informationInstallation guide. Activate. Install your TV. Uninstall. 1 min 10 mins. 30 mins
Installation guide 1 Activate 2 Uninstall 3 Install your TV 1 min 10 mins 30 mins INT This guide contains step-by-step instructions on how to: 1 Activate Before we do anything else, reply GO to the text
More informationAI BOX 1. ASSEMBLY. A1 : Desk frame B1 : 2 holes for installing 2 M5x16 screws
There are three main installation processes to get your Smart Standing Desk with AI up and running. 1. Assemble AI Box with your Desk. 2. Install Autonomous Desk application to your phone. 3. Set up AI
More informationHow to Join Instagram
How to Join Instagram Instagram is a growing social network based on still images and short videos. It is used on phones but you can watch Instagram videos and leave comments at http://instagram.com. Here
More informationPOWERRISE PLATINUM TECHNOLOGY REMOTE CONTROL GUIDE
POWERRISE PLATINUM TECHNOLOGY REMOTE CONTROL GUIDE LUXAFLEX Window Fashions with PowerRise Platinum Technology L U X A F L E X W i n d o w F a s h i o n s Control Like Never Before This guide shows you
More informationHTC VIVE Installation Guide
HTC VIVE Installation Guide Thank you for renting from Hartford Technology Rental. Get ready for an amazing experience. To help you setup the VIVE, we highly recommend you follow the steps below. Please
More informationWhat s In The Box. 1x, 2x, or 4x Indoor Antenna(s)* Coaxial Cable. Other Parts. 2x, 3x, or 5x 30 ft RS400 Cable* 1x 1 ft RS240 Cable** Panel Antenna
Read This First CEL-FI GO X Installation Guide 26081 Merit Circle, Suite 118 Laguna Hills, CA 92653 +1 (800) 761-3041 www.repeaterstore.com contact@repeaterstore.com What s In The Box Cel-Fi GO X Amplifier
More informationSafetyNet Mobile v3.0
This guide covers the Predictive Solutions SafetyNet application version 3.0. It is intended to show users how to enter, edit and sync inspections and incidents from a phone or tablet. The application
More informationMist. now you know. Clock Radio with Weather Forecast. Quick Start Guide and User Manual
Mist Clock Radio with Weather Forecast Quick Start Guide and User Manual now you know. Contents 2 Welcome to Ambient Devices! 3 Quick Start Guide 5 Getting to know your Mist Clock Radio 8 Using your Mist
More informationGetting Started Quicken 2011 for Windows
Getting Started Quicken 2011 for Windows Thank you for choosing Quicken! This guide helps you get started with Quicken as quickly as possible. You ll find out how to: Use the Home tab Set up your first
More informationQuick Start. DTA Self-Install Guide
Quick Start DTA Self-Install Guide 1 step Installing Your Rainbow HD Digital Transport Adapter (DTA) Your kit contains the following items needed for connecting your DTA to your TV*: DTA Box Coax Cable
More informationPOWERRISE PLATINUM TECHNOLOGY REMOTE CONTROL GUIDE
POWERRISE PLATINUM TECHNOLOGY REMOTE CONTROL GUIDE LUXAFLEX Window Fashions with PowerRise Platinum Technology REPLACES ISSUE DATE: APPROVED BY: K.FUESSEL PAGE 1 OF 23 Control Like Never Before This guide
More informationSamsung Gear VR 4.0 Retail Experience. Setup & Installation Guide
Samsung Gear VR 4.0 Retail Experience Setup & Installation Guide Before You Begin Users must follow the exact steps as outlined in the document. Users should not skip or ignore any steps outlined in the
More informationParentZone. Your guide to accessing your child s account and their learning journey.
ParentZone Your guide to accessing your child s account and their learning journey. Accessing ParentZone Shortly after your child has started, you will receive an email to one or both of your registered
More informationTRIMLIGHT SELF-INSTALL TRAINING MANUAL
1 TRIMLIGHT SELF-INSTALL TRAINING MANUAL 2 Double Strand System (Entire system will can have 2 colors at a time) 3 One Sided Location Control Box Layout TO NOTE: Control Boxes mounted far from the living
More informationUser's Guide. AC Circuit Load Tester. Model CT70
User's Guide AC Circuit Load Tester Model CT70 Introduction Congratulations on your purchase of the CT70 AC Circuit Load Tester. This device can detect circuit and wiring problems such as: Poor ground
More information1.3 Using Your BoXZY
1.3 Using Your BoXZY This manual will explain how to use your BoXZY Written By: BoXZY 2017 boxzy.dozuki.com Page 1 of 14 INTRODUCTION By beginning this manual we assume you have read and understood the
More informationStep 1. - To Create an Account
Kuskitannee Lodge 168 Website registration walk through Overview In order to make it easier to plan for weekends and to allow users to easily register online a process has been created which will allow
More informationHow to download library ebooks to your Kindle
How to download library ebooks to your Kindle You can download Kindle ebooks through the Ella Johnson Memorial Library. To check out and download books to your Kindle you will need to have: Your Ella Johnson
More informationSmart Device/App Users
Smart Device/App Users 1. Go to your app store. Search for Mopeka Tank Check app and install. 2. Launch the app. When it starts it will automatically start a search for Mopeka sensors. 3. While the app
More informationScan Sat Network S.L.
Scan Sat Network S.L. IPTV Issue Solver Guide No Signal on the screen with IPTV. My IPTV channels are stopping. My Radio is not working I don t get any sound on my channels No Signal on the screen with
More informationQuick Start Guide.indd 1 05/11/15 10:07
015-10-19 Quick Start Guide.indd 1 05/11/15 10:07 1 WELCOME TO TRACKMAN Congratulations on the purchase of your TrackMan 4. This guide shows you what your TrackMan can do, helps you set it up, and gets
More informationCODE KIT WORKSHOP GUIDE
CODE KIT WORKSHOP GUIDE Find The littlebits Code Kits @demco.com Search: littlebits Code Kit Call 800.962.4463 or email custserv@demco.com DESCRIPTION We plan to adapt a lesson from the new littlebits
More informationOvercoming Edmodo errors when turning in assignments
Lutheran High North Technology shanarussell@lutheranhighnorth.org www.lutheranhighnorth.org/technology Also known as: OMG I can t turn my homework in! What do I do? Overcoming Edmodo errors when turning
More informationInstallation Introduction: Initial installation:
ASWC-1 VEHICLE SPECIFIC INSTRUCTIONS Follow the instructions in this manual to complete the installation of the Axxess ASWC-1. ASWC-1 Connections: Connect the Black wire of the ASWC-1 to chassis ground.
More informationDESIGN A SHOOTING STYLE GAME IN FLASH 8
DESIGN A SHOOTING STYLE GAME IN FLASH 8 In this tutorial, you will learn how to make a basic arcade style shooting game in Flash 8. An example of the type of game you will create is the game Mozzie Blitz
More informationAMAZING POWER ENERGY EDUCATION WORLD. Smell Gas. Act Fast.
AUNT SARAH and the AMAZING POWER ENERGY EDUCATION WORLD Smell Gas. Act Fast. Aunt Sarah and the Amazing Power 2016 Culver Media, LLC 800-428-5837 Product #41065 Run #5096 September 2016 Printed by Quad/Graphics,
More informationVirtual Wound Check Study Instructions: How to Upload a Photo to MyHealthConnection Using the UCHealth App
Virtual Wound Check Study Instructions: How to Upload a Photo to MyHealthConnection Using the UCHealth App IRB #17-1179 PI: Lucas Marzec, MD Questions, or need help? Contact Rebecca Guigli at 303-724-9942
More informationSTRUCTURE SENSOR QUICK START GUIDE
STRUCTURE SENSOR 1 TABLE OF CONTENTS WELCOME TO YOUR NEW STRUCTURE SENSOR 2 WHAT S INCLUDED IN THE BOX 2 CHARGING YOUR STRUCTURE SENSOR 3 CONNECTING YOUR STRUCTURE SENSOR TO YOUR IPAD 4 Attaching Structure
More informationHow to use Photo Story 3
How to use Photo Story 3 Photo Story 3 helps you to make digital stories on the computer using photos (or other images), text and sound. You can record your voice and write your own text. You can also
More informationPortable All-Band Radar and Laser Detector RD950. Owner s Manual
Portable All-Band Radar and Laser Detector RD950 Owner s Manual K40 Consult Don t like to read manuals? Call our experienced K40 Consultants. We ll explain the whole thing. 800.323.5608 K40 ELECTRONICS
More informationCricut Design Space App for ipad User Manual
Cricut Design Space App for ipad User Manual Cricut Explore design-and-cut system From inspiration to creation in just a few taps! Cricut Design Space App for ipad 1. ipad Setup A. Setting up the app B.
More informationGetting Started Guide
Getting Started Guide Overview Launchkey Thank you for buying Novation Launchkey. Producing and performing great electronic music is about to become quicker, easier and more fun than ever before! We designed
More informationGetting Started Guide
Getting Started Guide Overview Launchkey Mini Thank you for buying our mini keyboard controller for Ableton Live. It may be small, but it has everything you need to start producing and performing new tunes.
More informationTable of Contents. Vizit s Carousel Menu Gallery Play Favorite Remove Rotate Fill Screen Friends Block Lock Screen Settings Reply Share
User Guide Table of Contents VIZIT, VIZITME.COM, VIZIT SEE.TOUCH.FEEL, and the Vizit logo are trademarks and/or registered trademarks of Isabella Products, Inc. Other marks are owned by their respective
More informationWireless Z-Wave Control ZRP-100US Z-Wave Repeater USER MANUAL. Introduction
Wireless Z-Wave Control ZRP-100US Z-Wave Repeater USER MANUAL Introduction Thank you for choosing ZRP-100 Z-Wave Repeater product! ZRP-100 is a Z-Wave repeater with best RF performance to repeat Z-Wave
More informationCustom Mobile App Support
Custom Mobile App Support FBBC by Samantha Taylor App Scheduling app for Fit Body Boot Camp and Samantha Taylor Fitness. You can prebook your workouts, check in for your workout or cancel it, all through
More informationDownloading a ROBOTC Sample Program
Downloading a ROBOTC Sample Program This document is a guide for downloading and running programs on the VEX Cortex using ROBOTC for Cortex 2.3 BETA. It is broken into four sections: Prerequisites, Downloading
More informationFirmware version 1.05 supports all CMOS sensor based digital backs IQ150, IQ250 and A- series IQ250.
RELEASE NOTE January, 2015 Firmware version 1.05 for IQ150, IQ250 and A-series IQ250 Firmware version 1.05 supports all CMOS sensor based digital backs IQ150, IQ250 and A- series IQ250. New functionality
More informationProduct User Guide 1
1 Included with your purchase: Spark Activity Tracker USB wireless SyncPoint Extra coin cell battery (CR2032 battery) Your Spark will arrive with one battery already installed. Free SparkPeople membership
More informationEnclosed you will find helpful hints and instructions on how to make your project a success.
So you have decided to be an RMHC superstar! Now what? We are so thankful that you have said YES! Here is what we are asking of you: 1. Set up your personal fundraising site 2. Develop a realistic goal
More informationProximity-Sensor Counter Installation Instruction Model: MRC-PRO
Proximity-Sensor Counter Installation Instruction Model: MRC-PRO NYS DOT Approval SYSDYNE CORP. 1055 Summer St. 1 st Floor Stamford, CT 06905 Tel: (203)327-3649 Fax: (203)325-3600 Contents: Introduction...
More informationPart 2: Earpiece. Insert Protrusion (Internal Sketch) Hole Patterns Getting Started with Pro/ENGINEER Wildfire. Round extrusion.
Part 2: Earpiece 4 Round extrusion Radial pattern Chamfered edge To create this part, you'll use some of the same extrusion techniques you used in the lens part. The only difference in this part is that
More informationUser Manual. This User Manual will guide you through the steps to set up your Spike and take measurements.
User Manual (of Spike ios version 1.14.6 and Android version 1.7.2) This User Manual will guide you through the steps to set up your Spike and take measurements. 1 Mounting Your Spike 5 2 Installing the
More informationOnce your church has set up the Church App for Seraphim, you can now download the app onto your mobile device from the the App Store or Google Play.
Once your church has set up the Church App for Seraphim, you can now download the app onto your mobile device from the the App Store or Google Play. Once the app has completed downloading, open the app.
More informationunderstanding sensors
The LEGO MINDSTORMS EV3 set includes three types of sensors: Touch, Color, and Infrared. You can use these sensors to make your robot respond to its environment. For example, you can program your robot
More informationMegaPoints Controller
MegaPoints Controller A flexible solution and modular component for controlling model railway points and semaphore signals using inexpensive servos. User guide Revision 10c March 2015 MegaPoints Controllers
More informationLet s get connected. PKG_ _Rev.2_NR801 Set Up Guide.indd 1 05/07/ :29
Let s get connected PKG_000672-00_Rev.2_NR801 Set Up Guide.indd 1 05/07/2017 11:29 Setup steps 1 2 3 4 5 6 7 Check your activation date Find your master phone socket Unplug everything Plug in your NOW
More informationMounting instruction and operating manual. Access Point (UK) HmIP-HAP-UK
Mounting instruction and operating manual Access Point (UK) HmIP-HAP-UK Package contents Quantity Description 1 Homematic IP Access Point (UK) 1 Plug-in mains adapter 1 Network cable 2 Screws 2 Plugs 1
More information2011 / Circuit Tracer
INSTRUCTION MANUAL 2011 / 00521 Circuit Tracer Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 52044992 2008 Greenlee Textron
More informationHelp. Appendix A Camera Settings. IncuCount
Help The help menu has three items: About - will give company name and model information User Guide - will open up this document. Contact information - for Revolutionary Science's Technical support. Email:
More informationimpact VC-500LR Monolight INSTRUCTIONS
impact lighting equipment and accessories VC-500LR Monolight INSTRUCTIONS Congratulations on your purchase of the Impact VC-500LR Monolight. We feel that it will contribute much to your photographic skill
More informationHow to measure mas using the current clamp with TNT 12000
How to measure mas using the current clamp with TNT 12000 Summary The Prova 15 amp clamp, when used with the TNT 12000 mas function, non-invasively measures the mas of X-ray generators. Introduction The
More informationPHOTOGRAPHER S GUIDE TO THE CANON POWERSHOT S110
PHOTOGRAPHER S GUIDE TO THE CANON POWERSHOT S110 merical value. If you had it set to Auto before selecting Manual mode, the camera will reset it to ISO 80. And, as with Shutter Priority mode, if you set
More informationLAUNCHPAD. Getting Started Guide
LAUNCHPAD Getting Started Guide Overview Launchpad Thank you for buying Launchpad, the iconic grid instrument for Ableton Live. You re now part of the evolution in the creation of electronic music! The
More informationSTRUCTURE SENSOR & DEMO APPS TUTORIAL
STRUCTURE SENSOR & DEMO APPS TUTORIAL 1 WELCOME TO YOUR NEW STRUCTURE SENSOR Congrats on your new Structure Sensor! We re sure you re eager to start exploring your Structure Sensor s capabilities. And
More informationA W Table-Top Amplifier. with Built-in Bluetooth streaming
A0361 100W Table-Top Amplifier with Built-in Bluetooth streaming 17 The A0361 Table-Top Amplifier can be used with Channel Vision s CAT5 audio hubs to provide a powerful 100 Watt Amplifier, 50Watts per
More informationTM5. Guide Book. Hardware Version: 2.00 Software Version: 1.62
TM5 Guide Book Hardware Version: 2.00 Software Version: 1.62 ii Release Date : 2017-07-10 The information contained herein is the property of Techman Robot Corporation (hereinafter referred to as the Corporation).
More informationObjectives: Learn what an Arduino is and what it can do Learn what an LED is and how to use it Be able to wire and program an LED to blink
Objectives: Learn what an Arduino is and what it can do Learn what an LED is and how to use it Be able to wire and program an LED to blink By the end of this session: You will know how to use an Arduino
More informationLC7001 Whole House Lighting Controller
LC7001 Whole House Lighting Controller User Guide 1308243 REV. B Page i Compliance FCC Notice FCC ID: These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
More informationWelcome to Family Dominoes!
Welcome to Family Dominoes!!Family Dominoes from Play Someone gets the whole family playing everybody s favorite game! We designed it especially for the ipad to be fun, realistic, and easy to play. It
More informationThe mobile device should be open to something neutral, like the device s Home screen
Usability test script Mobile apps Adapted from Rocket Surgery Made Easy 2013 Steve Krug THE INSTRUCTIONS The mobile device should be open to something neutral, like the device s Home screen Hi,. My name
More informationTURN A PHOTO INTO A PATTERN OF COLORED DOTS (CS6)
TURN A PHOTO INTO A PATTERN OF COLORED DOTS (CS6) In this photo effects tutorial, we ll learn how to turn a photo into a pattern of solid-colored dots! As we ll see, all it takes to create the effect is
More informationCongratulations on purchasing Molten MIDI 5 by Molten Voltage
OWNER S MANUAL Congratulations on purchasing Molten MIDI 5 by Molten Voltage Molten MIDI 5 is designed to control the Digitech Whammy 5. When configured for Whammy & Clock output, Molten MIDI 5 also sends
More informationV6889 IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. sher-price.com.au
V6889 IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fi sher-price.com.au IMPORTANT! DANGER To prevent electric shock, do not immerse in water; wipe clean with damp cloth. WARNING To prevent strangulation
More informationContents Components... 1 Loop Installation Options... 2 Loop Pad Installation... 3 Loop Wire Installation... 4 HLD3 Driver Connection...
Contents Components... 1 Loop Installation Options... 2 Loop Pad Installation... 3 Loop Wire Installation... 4 HLD3 Driver Connection... 5 Optical... 5 RCA... 5 Installation with a Set Top Box or Sound
More informationOZOBLOCKLY BASIC TRAINING LESSON 1 SHAPE TRACER 1
OZOBLOCKLY BASIC TRAINING LESSON 1 SHAPE TRACER 1 PREPARED FOR OZOBOT BY LINDA MCCLURE, M. ED. ESSENTIAL QUESTION How can we make Ozobot move using programming? OVERVIEW The OzoBlockly games (games.ozoblockly.com)
More informationAUDACITY TABLE OF CONTENTS
Audacity Tutorial AUDACITY Audacity is a free, easy-to-use and multilingual audio editor and recorder for Windows, Mac OS X, GNU/Linux and other operating systems. You can use Audacity to record live audio,
More informationHow To Handbook For Learners
How To Handbook For Learners 2017 Contents 3 How do I log in? 4-5 How do I watch a video? 6-9 How do I take an assessment? 10-11 How do I review an assessment I have just written? 12-13 How do I review
More informationRechargeable Motivia Motorization Made Simple
Rechargeable Motivia Motorization Made Simple Operating & Programming Guide For Shades Fabric Shades Natural Woven Shades Roller Shades Sheer Shadings Solar Shades REMOTE CONTROL / LINK REMOTE Table of
More informationShort operating instructions
gottardo LED office floor lamp series I Short operating instructions Visit us online too. gottardo-led.swiss Product film on Youtube Operating instructions gottardo series I Version: 1.0/20180406/SN SW:20170224
More informationOverdrive Library ebooks for Mobile Devices
Overdrive Library ebooks for Mobile Devices Works for most Non-Kindle devices: Nook Color, Nook Tablet, Nook HD (but not Black&White Nooks) ipad, Windows 8 tablets Android tablets, including Samsung, Nexus,
More informationTinker Tuesday Project - Pumpkin Carving
Tinker Tuesday Project - Pumpkin Carving 1. Acquire a small pumpkin (between six and seven inches tall excluding the stem). A full size pumpkin will not fit in the engraver. 2. Use a knife to remove the
More informationHardware Installation. Do this first:
1 Do this first: Hardware Installation Need some help? Here s what you ll need: 4 AA Batteries Phillips screwdriver Visit us online. support.remotelock.com We re here to help. 1 (877) 254 5625 support@remotelock.com
More informationWELCOME TO BINGO CALLER
WELCOME TO BINGO CALLER Dee Dee Software Design & Sales A Division Of Seocom Enterprises Unlimited LLC Bingo Caller was designed to be used at a computer screen resolution of at least 1024 x 768, along
More informationAccessing e-books with your e-reader
e-reader 1 Accessing e-books with your e-reader What you need to know about library e-books is that each one is protected by Digital Rights Management (DRM). This means that access to e-books is restricted
More informationInstruction Manual for the Revolutionary Science RS-IC-150 IncuCount
Instruction Manual for the Revolutionary Science RS-IC-150 IncuCount REVO LUTIONA RY SCIENCE Making Science Simple! Table of Contents Introduction 2 Parts Checklist, Notes, Service Record 3 Warranty 4
More informationScorpion Antennas Controller. Instruction Manual. Firmware V11.8 November Please Read This Manual Completely Before Operating The Controller
Firmware V11.8 November 2012 Please Read This Manual Completely Before Operating The Controller Contents Introduction:... 3 Installation:... 3 Using the Scorpion Antennas Controller... 5 Tuning Your Dipole...
More informationExperiment P24: Motor Efficiency (Photogate, Power Amplifier, Voltage Sensor)
PASCO scientific Physics Lab Manual: P24-1 Experiment P24: Motor Efficiency (Photogate, Power Amplifier, Voltage Sensor) Concept Time SW Interface Macintosh File Windows File energy 30 m 700 P24 Motor
More informationFAQ for City of Tacoma employees
General: How do I update my contact information (address, phone number, email address)? How do I change my password? Forgot password Forgot username How do I favorite or bookmark the login page? Can I
More informationFlightboard. Service Provider Handbook
Flightboard Service Provider Handbook Flightboard Introduction Interruptions from dispatchers and project managers can slow you down. In most cases, these interruptions come from your clients just trying
More informationOverDrive for Kindle, Kindle Paperwhite, Kindle Voyage, and Kindle Oasis (not Kindle Fire and Fire Tablet) Contents
OverDrive for Kindle, Kindle Paperwhite, Kindle Voyage, and Kindle Oasis (not Kindle Fire and Fire Tablet) Contents Optimizing OverDrive for your Kindle Searching and Browsing Borrowing and Downloading
More informationCutting out in GIMP. Navigation click to go to a section
Cutting out in GIMP Navigation click to go to a section Before you start Cutting out an element Using several elements Using backgrounds with cut out elements Adjusting the colour of elements Creating
More informationPROGRESSIVE JACKPOT MARQUEE
PROGRESSIVE JACKPOT MARQUEE 1 FACTORY CONTACT INFORMATION BAY TEK GAMES INC. Pulaski Industrial Park 1077 East. Glenbrook Drive Pulaski, WI 54162 USA JOIN OUR SERVICE FIRST NETWORK! This free service is
More informationRLS2. Owner s Manual. Portable All-Band Radar and Laser Detector with GPS Technology
RLS2 Owner s Manual Portable All-Band Radar and Laser Detector with GPS Technology K40 Consult Don t like to read manuals? Call our experienced K40 Consultants. We ll explain the whole thing. 800.323.5608
More informationUSER MANUAL. Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330
USER MANUAL Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330 Introduction Congratulations on your purchase of the Extech EX330 Meter. The EX330 offers AC/DC Voltage, AC/DC Current, Resistance,
More informationMaking a Recording in the Booth
Making a Recording in the Booth From UW Phonetics/Sociolinguistics Lab Wiki This page is a quick start guide to making a recording in the soundproof booth. Before continuing with the guide, check to ensure
More informationSchwinn MPower Echelon Console + Power
Schwinn MPower Echelon Console + Power 2013 Core Fitness, LLC, dba StairMaster. All rights reserved. and indicates a trademark or registered trademark. Core Fitness, LLC trademarks include Schwinn, A.C.,
More informationSetup Guide. support.spruceirrigation.com.
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
More informationName EET 1131 Lab #2 Oscilloscope and Multisim
Name EET 1131 Lab #2 Oscilloscope and Multisim Section 1. Oscilloscope Introduction Equipment and Components Safety glasses Logic probe ETS-7000 Digital-Analog Training System Fluke 45 Digital Multimeter
More informationGYPSY GYPSY. Quick Start Guide. Guide Rapide GET STARTED:
GYPSY Quick Start Guide GYPSY Guide Rapide GET STARTED: Be sure to download the latest updates and claim your Cricut rewards points! Visit www.provocraft.com/gypsy STYLUS PEN ZOOM (IN AND OUT) MENU BUTTON
More informationPHYSICS 220 LAB #1: ONE-DIMENSIONAL MOTION
/53 pts Name: Partners: PHYSICS 22 LAB #1: ONE-DIMENSIONAL MOTION OBJECTIVES 1. To learn about three complementary ways to describe motion in one dimension words, graphs, and vector diagrams. 2. To acquire
More informationCreating a Maze Game in Tynker
Creating a Maze Game in Tynker This activity is based on the Happy Penguin Scratch project by Kristine Kopelke from the Contemporary Learning Hub at Meridan State College. To create this Maze the following
More informationNEULOG PHOTO GATE LOGGER SENSOR GUIDE
NeuLog photo gate logger sensor NUL-209 The NeuLog photo gate sensor can be used for any science experiment which involves taking accurate velocity and/or acceleration measurements especially in the field
More informationPracticing with Ableton: Click Tracks and Reference Tracks
Practicing with Ableton: Click Tracks and Reference Tracks Why practice our instruments with Ableton? Using Ableton in our practice can help us become better musicians. It offers Click tracks that change
More informationNEULOG PHOTO GATE LOGGER SENSOR GUIDE
NeuLog photo gate logger sensor NUL-209 Part# NL-2090 The NeuLog photo gate sensor can be used for any science experiment which involves taking accurate velocity and/or acceleration measurements especially
More informationSolidWorks Tutorial 1. Axis
SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to
More informationMake sure you have these items handy
Quick Start Guide Make sure you have these items handy What we ve sent you: A. Fetch box B. Ethernet Cable (3m) (You ll receive 3 of these if you ve ordered a Power Line Adaptor 1 x 3m & 2 x 1.5m) G.
More informationUser Manual for Grass Snap (Android Version)
User Manual for Grass Snap (Android Version) Grass Snap is a useful tool when monitoring your pastures and grasslands. Grass Snap will take you through the monitoring process step-by-step. Grass Snap meets
More information