Macro. Installation and User Guide. copyright 2012 C.T. Stump

Size: px
Start display at page:

Download "Macro. Installation and User Guide. copyright 2012 C.T. Stump"

Transcription

1 Macro Installation and User Guide copyright 2012 C.T. Stump

2 Forward: Dear User, While I use Studio One 2 as my primary DAW but it lack's tools that I feel are essential to my work flow in the form of MIDI sequencing. I have other tools that I can Rewire into Studio One that make up for this deficiency however it would be more helpful to use the tools in Studio One to start with. Fortunately with the addition of Macros Studio One can be customized with a little Elbow grease. What I've done is created a set of Macro's that will set up and open a blank Piano Roll as either a full 2 Bar 8 track Pattern building Lab or a 2 Bar, 4 Bar or 8 Bar single Pattern Labs and a Utility Macro to add Patterns to all of the Labs. With these patterns set up it is just a matter of dragging and dropping the instrument right on to the Pattern either before or after you play or input the Notes. These Macro's are an update of my previous Macro's Add MIDI Track Open Piano Roll set and should be easier to use on their own now however I hope you can use all of them. Thank's and let me know what you think at the Presonus Forum, Charlie

3 Installation: #1.Unzip content to a new folder or your desktop. #2. Copy the Macro's from your new folder to your Presonus Macro folder located where your Songs, Sound sets and Preset are stored: #3. Open Studio One and then open the Empty Song Template:

4 #4. Open Macro Bar Press the Action Button, Scroll down to C.T.'s Pattern Builder Kit and choose MIDI Pattern Kit Full after it's loaded it should look like this: You can now go to work either loading Instrument's or adding Notes to the Piano Roll. Snap is set, Input Quantize is on, notes are Quantize to 1/16 notes and the loop is on. The piano roll is set to the first track, the tracks are named and the Start and End Markers are set to the Pattern length. Of course you can change these to your liking as you wish. Note: You can use the Utility Macro MIDI Pattern Builder Add+1 to add another track and Pattern( this is explained at the end of this document).

5 Single Track Pattern Macro's: You may choose to build only one Pattern to start with so I included a 2 Bar,4 Bar and 8 Bar single track Macro's. Here is what the 2 Bar look's like: Here is the 4 Bar:

6 Here is the 8 Bar: It is set up and ready for your input. What I normally do is add the Instrument than start the transport and add the Note with my keyboard or mouse on the Piano Roll. It's up to you in how you want to use these Macro's. The Utility Macro: I've Included a Utility Macro that can be use with set or as a stand alone Macro but before you use it you have to understand that it will use the length of the Loop points as it's guide and you must select the last channel physically for it to work properly, what I did was assign a Keyboard action to it but you can always open the macro Bar if that work's better. Here is a short tutorial of what I set up: #1. First open your Keyboard Shortcuts editor in Studio One menu Options: (see Photo on next page)

7 Scroll down to the Macro action: Choose MIDI Pattern Builder Add+1 : Assign a Keystroke you can remember and press Assign than OK and your done.

8 Using the Utility(IMPORTANT): When ever you use this Macro it is important that you select a clip in the Clips pane for it to have the best results as shown: Of course you are more than welcome to modify and upload these Macro's. Enjoy.

MUSC 1331 Lab 3 (Northwest) Using Software Instruments Creating Markers Creating an Audio CD of Multiple Sources

MUSC 1331 Lab 3 (Northwest) Using Software Instruments Creating Markers Creating an Audio CD of Multiple Sources MUSC 1331 Lab 3 (Northwest) Using Software Instruments Creating Markers Creating an Audio CD of Multiple Sources Objectives: 1. Learn to use Markers to identify sections of a sequence/song/recording. 2.

More information

Seeley Mudd 116 Audio Production Studio

Seeley Mudd 116 Audio Production Studio Reservations: 1. Check the Calendar on the Studio Webpage to see available studio times. 2. Look over the Equipment List to decide what equipment you ll need. 3. Fill out the Studio Reservation Form from

More information

IGNITE BASICS V1.1 19th March 2013

IGNITE BASICS V1.1 19th March 2013 IGNITE BASICS V1.1 19th March 2013 Ignite Basics Ignite Basics Guide Ignite Basics Guide... 1 Using Ignite for the First Time... 2 Download and Install Ignite... 2 Connect Your M- Audio Keyboard... 2 Open

More information

Chord Track Explained

Chord Track Explained Studio One 4.0 Chord Track Explained Unofficial Guide to Using the Chord Track Jeff Pettit 5/24/2018 Version 1.0 Unofficial Guide to Using the Chord Track Table of Contents Introducing Studio One Chord

More information

I2C8 MIDI Plug-In Documentation

I2C8 MIDI Plug-In Documentation I2C8 MIDI Plug-In Documentation Introduction... 2 Installation... 2 macos... 2 Windows... 2 Unlocking... 4 Online Activation... 4 Offline Activation... 5 Deactivation... 5 Demo Mode... 5 Tutorial... 6

More information

Instachord. MIDI Processor Plug-in. Manual

Instachord. MIDI Processor Plug-in. Manual Instachord MIDI Processor Plug-in Manual website: waproduction.com email: info@waproduction.com Version 1.0.0 released in March 2018. Copyright 2018 - waproduction.com This document is created in 01/20/2018.

More information

When you load GarageBand it will open a window on your desktop that will look like this:

When you load GarageBand it will open a window on your desktop that will look like this: itongue: Our Multilingual Future -Grundtvig Partnership Project Instructions for use of Garageband software in preparing audio clips for decoded products. GarageBand automatically comes on Mac computers

More information

Battlefield Academy Template 1 Guide

Battlefield Academy Template 1 Guide Battlefield Academy Template 1 Guide This guide explains how to use the Slith_Template campaign to easily create your own campaigns with some preset AI logic. Template Features Preset AI team behavior

More information

Tutorial 3: Drawing Objects in AutoCAD 2011

Tutorial 3: Drawing Objects in AutoCAD 2011 Tutorial 3: Drawing Objects in AutoCAD 2011 Audience: Users new to AutoCAD Prerequisites: None Time to complete: 15 minutes In This Tutorial Please complete the lessons in this tutorial in order. The earlier

More information

iphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book.

iphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book. iphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book. 1 Contents Chapter 1 3 Welcome to iphoto 3 What You ll Learn 4 Before

More information

In this lesson we are going to create cartoon eyes and parent them to the head bone.

In this lesson we are going to create cartoon eyes and parent them to the head bone. In this lesson we are going to create cartoon eyes and parent them to the head bone. Open up your fish project and in the modeling object window we will create a new object layer to develop the eyes, then

More information

SolidWorks Tutorial 1. Axis

SolidWorks Tutorial 1. Axis SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to

More information

Managing Your Workflow Using Coloured Filters with Snapper.Photo s PhotoManager Welcome to the World of S napper.photo

Managing Your Workflow Using Coloured Filters with Snapper.Photo s PhotoManager Welcome to the World of S napper.photo Managing Your Workflow Using Coloured Filters with Snapper.Photo s PhotoManager Welcome to the World of S napper.photo Get there with a click Click on an Index Line to go directly there Click on the home

More information

THE TECHNOLOGY AND CRAFT OF COMPUTER GAME DESIGN An introductory course in computer game design

THE TECHNOLOGY AND CRAFT OF COMPUTER GAME DESIGN An introductory course in computer game design THE TECHNOLOGY AND CRAFT OF COMPUTER GAME DESIGN An introductory course in computer game design TUTORIALS, GRAPHICS, AND COURSEWARE BY: MR. FRANCIS KNOBLAUCH TECHNOLOGY EDUCATION TEACHER CONWAY MIDDLE

More information

CAD Orientation (Mechanical and Architectural CAD)

CAD Orientation (Mechanical and Architectural CAD) Design and Drafting Description This is an introductory computer aided design (CAD) activity designed to give students the foundational skills required to complete future lessons. Students will learn all

More information

Table of Contents. Lesson 1 Getting Started

Table of Contents. Lesson 1 Getting Started NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

Kameleono. User Guide Ver 1.2.3

Kameleono. User Guide Ver 1.2.3 Kameleono Ver 1.2.3 Table of Contents Overview... 4 MIDI Processing Chart...5 Kameleono Inputs...5 Kameleono Core... 5 Kameleono Output...5 Getting Started...6 Installing... 6 Manual installation on Windows...6

More information

Record your debut album using Garageband Brandon Arnold, Instructor

Record your debut album using Garageband Brandon Arnold, Instructor Record your debut album using Garageband Brandon Arnold, Instructor brandon.arnold@nebo.edu Garageband is free software that comes with every new Mac computer. It is surprisingly robust and can be used

More information

Getting Started Pro Tools M-Powered. Version 8.0

Getting Started Pro Tools M-Powered. Version 8.0 Getting Started Pro Tools M-Powered Version 8.0 Welcome to Pro Tools M-Powered Read this guide if you are new to Pro Tools or are just starting out making your own music. Inside, you ll find quick examples

More information

Overview. The Game Idea

Overview. The Game Idea Page 1 of 19 Overview Even though GameMaker:Studio is easy to use, getting the hang of it can be a bit difficult at first, especially if you have had no prior experience of programming. This tutorial is

More information

QUICK SETUP GUIDE: Firewire/mLAN MACINTOSH OSX Cubase AI4 / Studio Manager / Motif XS Editor / Mac OSX

QUICK SETUP GUIDE: Firewire/mLAN MACINTOSH OSX Cubase AI4 / Studio Manager / Motif XS Editor / Mac OSX QUICK SETUP GUIDE: Firewire/mLAN MACINTOSH OSX Cubase AI4 / Studio Manager / Motif XS Editor / Mac OSX Install Install Cubase AI4 on your Mac. Update to the latest version at www.steinberg.net Download

More information

Drawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum.

Drawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum. Page 1 of 6 Introduction The drawing used for this tutorial comes from Clark R. and M.Pause, "Precedents in Architecture", VNR 1985, page 135. Stephen Peter of the University of South Wales developed the

More information

AUDIO INSTRUCTIONS CAPTURE STUDIO ONE PRO TOOLS

AUDIO INSTRUCTIONS CAPTURE STUDIO ONE PRO TOOLS AUDIO INSTRUCTIONS CAPTURE STUDIO ONE PRO TOOLS Updated 4/1/2016 SETTING UP THE LIVE ROOM Set the room up for recording. Arrange the studio rug in the live room and position microphone stands or direct

More information

HyperVoicing. User Manual. Chords generation software For PC Windows avril 2018 Calques MIDI. G. Rochette

HyperVoicing. User Manual. Chords generation software For PC Windows avril 2018 Calques MIDI. G. Rochette HyperVoicing Chords generation software For PC Windows 10 User Manual 21 avril 2018 Calques MIDI G. Rochette 278 79 Table of Contents Table of Contents 2 INTRODUCTION 4 What does the software do? 4 Languages

More information

EDUCATION GIS CONFERENCE Geoprocessing with ArcGIS Pro. Rudy Prosser GISP CTT+ Instructor, Esri

EDUCATION GIS CONFERENCE Geoprocessing with ArcGIS Pro. Rudy Prosser GISP CTT+ Instructor, Esri EDUCATION GIS CONFERENCE Geoprocessing with ArcGIS Pro Rudy Prosser GISP CTT+ Instructor, Esri Maintenance What is geoprocessing? Geoprocessing is - a framework and set of tools for processing geographic

More information

Camtasia Studio: Windows

Camtasia Studio: Windows Using the Camtasia Screen Recorder Camtasia Studio: Windows This guide will give you a brief overview of the look and feel of using Camtasia Recorder to record your screen. Starting Camtasia Finding on

More information

Getting Started. Pro Tools LE & Mbox 2 Micro. Version 8.0

Getting Started. Pro Tools LE & Mbox 2 Micro. Version 8.0 Getting Started Pro Tools LE & Mbox 2 Micro Version 8.0 Welcome to Pro Tools LE Read this guide if you are new to Pro Tools or are just starting out making your own music. Inside, you ll find quick examples

More information

Using the Desktop Recorder

Using the Desktop Recorder Mediasite Using the Desktop Recorder Instructional Media publication: 09-Students 9/8/06 Introduction The new Desktop Recorder from Mediasite allows HCC users to record content on their computer desktop

More information

AutoCAD 2D. Table of Contents. Lesson 1 Getting Started

AutoCAD 2D. Table of Contents. Lesson 1 Getting Started AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

The Art of SoundFont: A Step-by-Step Guide Page 1 of 2

The Art of SoundFont: A Step-by-Step Guide Page 1 of 2 The Art of SoundFont: A Step-by-Step Guide Page 1 of 2 Jess Skov-Nielsen was the Grand-Prize winner of the 1997 Creative Open MIDI Contest. Are you one of the many desktop musicians who rely only on those

More information

Getting Started. Pro Tools LE & Mbox 2 Pro. Version 8.0

Getting Started. Pro Tools LE & Mbox 2 Pro. Version 8.0 Getting Started Pro Tools LE & Mbox 2 Pro Version 8.0 Welcome to Pro Tools LE Read this guide if you are new to Pro Tools or are just starting out making your own music. Inside, you ll find quick examples

More information

Autodesk. SketchBook Mobile

Autodesk. SketchBook Mobile Autodesk SketchBook Mobile Copyrights and Trademarks Autodesk SketchBook Mobile (2.0.2) 2013 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts

More information

Getting Started Guide

Getting Started Guide SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.

More information

Make It: Bottle Light. Making Bottle Lights with the Westmont Library Makery

Make It: Bottle Light. Making Bottle Lights with the Westmont Library Makery Make It: Bottle Light Making Bottle Lights with the Westmont Library Makery Introduction Welcome to the Westmont Library s Make It: Bottle Light program! We re very pleased to have you. In this program,

More information

Excel Lab 2: Plots of Data Sets

Excel Lab 2: Plots of Data Sets Excel Lab 2: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and

More information

Recording guidebook This provides information and handy tips on recording vocals and live instruments at home.

Recording guidebook This provides information and handy tips on recording vocals and live instruments at home. Welcome to The Hit Kit s QuickStart instructions! Read on and you ll be set up and making your first steps in the world of music making in no time at all! Remember, you can find complete instructions to

More information

Generations Automatic Stand-Alone Lace By Bernie Griffith Generations Software

Generations Automatic Stand-Alone Lace By Bernie Griffith Generations Software We are going to create an open Italian lace. Generations software products provide advanced image processing features allowing for the creation of stand-alone lace with just a few simple techniques. A

More information

A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs

A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs Activity 1 - Play Music A Day in the Life CTE Enrichment Grades 3-5 mblock Robotics - Simple Programs Computer Science Unit One of the simplest things that we can do, to make something cool with our robot,

More information

ACDSee Pro 3 tutorials: Pro 3 overview for new users

ACDSee Pro 3 tutorials: Pro 3 overview for new users In ACDSee Pro Photo Manager 3, the Manage, View, Process and s help to accelerate your photography workflow. You can easily switch between modes depending where you are in your workflow. To switch between

More information

SonicCell. Using SonicCell with GarageBand. Workshop ÂØÒňÎ. Expandable Synthesizer Module and Audio Interface SCWS06 1

SonicCell. Using SonicCell with GarageBand. Workshop ÂØÒňÎ. Expandable Synthesizer Module and Audio Interface SCWS06 1 ÂØÒňΠWorkshop SonicCell Expandable Synthesizer Module and Audio Interface Using SonicCell with GarageBand 2008 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced

More information

Image resizing with Microsoft Office Picture Manager

Image resizing with Microsoft Office Picture Manager Marketing Services and Web Management Digital Marketing Image resizing with Microsoft Office Picture Manager Document Owner Adam Seeley Last update Monday, 3 February 2014 Status Final Version 2.0 Circulation

More information

ArbStudio Triggers. Using Both Input & Output Trigger With ArbStudio APPLICATION BRIEF LAB912

ArbStudio Triggers. Using Both Input & Output Trigger With ArbStudio APPLICATION BRIEF LAB912 ArbStudio Triggers Using Both Input & Output Trigger With ArbStudio APPLICATION BRIEF LAB912 January 26, 2012 Summary ArbStudio has provision for outputting triggers synchronous with the output waveforms

More information

ADDING RAIN TO A PHOTO

ADDING RAIN TO A PHOTO ADDING RAIN TO A PHOTO Most of us would prefer to avoid being caught in the rain if possible, especially if we have our cameras with us. But what if you re one of a large number of people who enjoy taking

More information

Photo One Digital Photo Shoots and Edits

Photo One Digital Photo Shoots and Edits Photo One Digital Photo Shoots and Edits You will submit photo shoots, unedited and you will submit selected edited images. The shoots will be explained first and the edits will be explained later on this

More information

CHORD PLAYER. MIDI Processor Plug-in. Manual

CHORD PLAYER. MIDI Processor Plug-in. Manual CHORD PLAYER MIDI Processor Plug-in Manual rfmusic.net Rahman Fotouhi Sarab, Iran website: rfmusic.net email: info@rfmusic.net Version 1.0.0 b1 released in May 2017. Copyright 2017 - rfmusic.net This document

More information

Step 1: Open A Photo To Place Inside Your Text

Step 1: Open A Photo To Place Inside Your Text Place A Photo Or Image In Text In Photoshop In this Photoshop tutorial, we re going to learn how to place a photo or image inside text, a very popular thing to do in Photoshop, and also a very easy thing

More information

How to Build a LimeSurvey: The Basics for Beginners

How to Build a LimeSurvey: The Basics for Beginners 1 How to Build a LimeSurvey: The Basics for Beginners Login and view a list of your surveys. We will give you 3 templates to start with. These are the ethics compliant templates you need to protect participant

More information

Copyrights and Trademarks

Copyrights and Trademarks Mobile Copyrights and Trademarks Autodesk SketchBook Mobile (2.0) 2012 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be

More information

Resources to help clients optimize their move online

Resources to help clients optimize their move online The Accountant s Guide to Moving Clients Online PART 3: Resources to help clients optimize their move online Accelerate your clients successful transition to QuickBooks Online with these helpful resources.

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Section Table of Contents: Section 11.0

Section Table of Contents: Section 11.0 Section 11.0 Table of Contents: Section 11.0 Overview - Section 11.0... 11.0-3 Setting a Coordinate System (internal use only)... 11.0-3 Setting a Coordinate System in Sheet Set Properties... 11.0-3 Resetting

More information

PHOTOSHOP PUZZLE EFFECT

PHOTOSHOP PUZZLE EFFECT PHOTOSHOP PUZZLE EFFECT In this Photoshop tutorial, we re going to look at how to easily create a puzzle effect, allowing us to turn any photo into a jigsaw puzzle! Or at least, we ll be creating the illusion

More information

How To Turn Off Manual Tempo Mode In Pro Tools

How To Turn Off Manual Tempo Mode In Pro Tools How To Turn Off Manual Tempo Mode In Pro Tools 1 Turn the volume down on your audio interface when counting off before recording or playback starts In Manual Tempo mode, Pro Tools ignores tempo. based

More information

Virtual components in assemblies

Virtual components in assemblies Virtual components in assemblies Publication Number spse01690 Virtual components in assemblies Publication Number spse01690 Proprietary and restricted rights notice This software and related documentation

More information

TABLE OF CONTENTS. Logging into the Website Homepage and Tab Navigation Setting up Users on the Website Help and Support...

TABLE OF CONTENTS. Logging into the Website Homepage and Tab Navigation Setting up Users on the Website Help and Support... TABLE OF CONTENTS Logging into the Website...02 Homepage and Tab Navigation...03 Setting up Users on the Website...08 Help and Support...10 Uploding and Managing Photos...12 Using the Yearbook Ladder...16

More information

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008 1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical

More information

Steven Slate Drums 4.0

Steven Slate Drums 4.0 Steven Slate Drums 4.0 1 Steven Slate Drums 4.0 2 Introduction... 3 System Requirements... 4 Windows... 4 Mac OS X... 4 Installation... 4 Windows & Mac OS X... 4 Loading a Kit... 5 Loading an Instrument...

More information

Garageband. For. Teachers

Garageband. For. Teachers Garageband For Teachers To start a New Project : Click on the guitar on your dock this menu should pop up: click on the Loops option. This window will pop up next: Type the name of your song here Ex: 2011

More information

Scratch for Beginners Workbook

Scratch for Beginners Workbook for Beginners Workbook In this workshop you will be using a software called, a drag-anddrop style software you can use to build your own games. You can learn fundamental programming principles without

More information

Importing and processing gel images

Importing and processing gel images BioNumerics Tutorial: Importing and processing gel images 1 Aim Comprehensive tools for the processing of electrophoresis fingerprints, both from slab gels and capillary sequencers are incorporated into

More information

What s in this free demo? In this free excerpt from Beat Making on the MPC500 we ve included the chapter Chopping Breakbeats where you ll learn how to slice up a break to create your own drum kits and

More information

MANUAL. Invictus Guitar V1.0

MANUAL. Invictus Guitar V1.0 MANUAL Invictus Guitar V1.0 Copyright (c) Martin Britz 2017 Disclaimer Disclaimer The information in this document is subject to change without notice and does not represent a commitment on the part of

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created

More information

Objectives: Create Sprites Create Sounds Create Objects Create Room Program simple game

Objectives: Create Sprites Create Sounds Create Objects Create Room Program simple game GAME:IT Bouncing Ball Objectives: Create Sprites Create Sounds Create Objects Create Room Program simple game All games need sprites (which are just pictures) that, in of themselves, do nothing. They are

More information

Welcome to SPDL/ PRL s Solid Edge Tutorial.

Welcome to SPDL/ PRL s Solid Edge Tutorial. Smart Product Design Product Realization Lab Solid Edge Assembly Tutorial Welcome to SPDL/ PRL s Solid Edge Tutorial. This tutorial is designed to familiarize you with the interface of Solid Edge Assembly

More information

Instant Engagement Pair Structures. User s Manual. Instant Engagement 2011 Kagan Publishing

Instant Engagement Pair Structures. User s Manual. Instant Engagement 2011 Kagan Publishing Instant Engagement Pair Structures User s Manual Instant Engagement 2011 Kagan Publishing www.kaganonline.com 1.800.933.2667 2 Instant Engagement Pair Structures Table of Contents GAME OVERVIEW... 3 Setup...3

More information

Printing Manual (Photoshop)

Printing Manual (Photoshop) 1 NMU Art & Design Computer Lab Printing Manual (Photoshop) (Updated Fall 2013) 2 Contents Printing 13 X 19 Luster Epson 4900 Luster 3-5 Printing Large Format Epson 9900_Luster, Glossy or Matte 6-9 Printing

More information

First Steps in Unity3D

First Steps in Unity3D First Steps in Unity3D The Carousel 1. Getting Started With Unity 1.1. Once Unity is open select File->Open Project. 1.2. In the Browser navigate to the location where you have the Project folder and load

More information

Let s start by making a pencil, that can be used to draw on the stage.

Let s start by making a pencil, that can be used to draw on the stage. Paint Box Introduction In this project, you will be making your own paint program! Step 1: Making a pencil Let s start by making a pencil, that can be used to draw on the stage. Activity Checklist Start

More information

Scrivener Manual Windows Version Part II

Scrivener Manual Windows Version Part II Scrivener Manual Windows Version 2013 Part II Compiling Your Project this: ebook To compile your project, click on the Compile icon at the top of the screen. The icon looks like When you click on the Compile

More information

Modeling Basic Mechanical Components #1 Tie-Wrap Clip

Modeling Basic Mechanical Components #1 Tie-Wrap Clip Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely

More information

Table of Contents. Creating Your First Project 4. Enhancing Your Slides 8. Adding Interactivity 12. Recording a Software Simulation 19

Table of Contents. Creating Your First Project 4. Enhancing Your Slides 8. Adding Interactivity 12. Recording a Software Simulation 19 Table of Contents Creating Your First Project 4 Enhancing Your Slides 8 Adding Interactivity 12 Recording a Software Simulation 19 Inserting a Quiz 24 Publishing Your Course 32 More Great Features to Learn

More information

Annex IV - Stencyl Tutorial

Annex IV - Stencyl Tutorial Annex IV - Stencyl Tutorial This short, hands-on tutorial will walk you through the steps needed to create a simple platformer using premade content, so that you can become familiar with the main parts

More information

Quintic Software Tutorial 3

Quintic Software Tutorial 3 Quintic Software Tutorial 3 Take a Picture 1 Tutorial 3 Take a Picture Contents Page 1. Photo 2. Photo Sequence a. Add shapes and angles 3. Export Analysis 2 Tutorial 3 Take a Picture 1. Photo Open the

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

MEDICAL EDUCATION TECHNOLOGY

MEDICAL EDUCATION TECHNOLOGY Snipping Tool Overview The Snipping Tool provides a way to capture images from your display screen and imbed them in documents you develop. This is especially useful in Histopathology lab, since it allows

More information

Assignment 5 CAD Mechanical Part 1

Assignment 5 CAD Mechanical Part 1 Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started

More information

Excel Tool: Plots of Data Sets

Excel Tool: Plots of Data Sets Excel Tool: Plots of Data Sets Excel makes it very easy for the scientist to visualize a data set. In this assignment, we learn how to produce various plots of data sets. Open a new Excel workbook, and

More information

Version A u t o T h e o r y

Version A u t o T h e o r y Version 4.0 1 A u t o T h e o r y Table of Contents Connecting your Keyboard and DAW... 3 Global Parameters... 4 Key / Scale... 4 Mapping... 4 Chord Generator... 5 Outputs & Keyboard Layout... 5 MIDI Effects

More information

ITEC185 INTRODUCTION TO DIGITAL MEDIA

ITEC185 INTRODUCTION TO DIGITAL MEDIA 1 ITEC185 INTRODUCTION TO DIGITAL MEDIA ADOBE PHOTOSHOP ITEC185 - Introduction to Digital Media ITEC185 - Introduction to Digital Media 2 What is Adobe Photoshop? Photoshop is the leading professional

More information

COMPUTING CURRICULUM TOOLKIT

COMPUTING CURRICULUM TOOLKIT COMPUTING CURRICULUM TOOLKIT Pong Tutorial Beginners Guide to Fusion 2.5 Learn the basics of Logic and Loops Use Graphics Library to add existing Objects to a game Add Scores and Lives to a game Use Collisions

More information

33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof

33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof 33-2 Satellite Takeoff Tutorial--Flat Roof Satellite Takeoff Tutorial--Flat Roof A RoofLogic Digitizer license upgrades RoofCAD so that you have the ability to digitize paper plans, electronic plans and

More information

COPYRIGHTED MATERIAL CREATE A BUTTON SYMBOL

COPYRIGHTED MATERIAL CREATE A BUTTON SYMBOL CREATE A BUTTON SYMBOL A button can be any object or drawing, such as a simple geometric shape.you can draw a new object with the Flash drawing tools, or you can use an imported graphic as a button.a button

More information

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS Autodesk AutoCAD 2012: Fundamentals Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Autodesk AutoCAD 2012: Fundamentals Lesson 3.0 Drawing

More information

thank you for choosing the Vengeance Producer Suite: Multiband Sidechain (which will be abbreviated to VPS MBS throughout this document).

thank you for choosing the Vengeance Producer Suite: Multiband Sidechain (which will be abbreviated to VPS MBS throughout this document). Vengeance Producer Suite Multiband Sidechain User Guide: Version: 1.0 Update: August 2009 Dear customer, thank you for choosing the Vengeance Producer Suite: Multiband Sidechain (which will be abbreviated

More information

Scribble Maps Tutorial

Scribble Maps Tutorial Scribble Maps Tutorial Go to the homepage of Scribble Maps here: h t t p : / / w w w. s c r i b b l e m a p s. c o m / Getting to know the Interface Scribble Maps is a free online mapping application with

More information

digitization station DIGITAL SCRAPBOOKING 120 West 14th Street

digitization station DIGITAL SCRAPBOOKING 120 West 14th Street digitization station DIGITAL SCRAPBOOKING 120 West 14th Street www.nvcl.ca techconnect@cnv.org DIGITAL SCRAPBOOKING With MyMemories Suite 6 The MyMemories Digital Scrapbooking software allows you to create

More information

Introduction. The basics

Introduction. The basics Introduction Lines has a powerful level editor that can be used to make new levels for the game. You can then share those levels on the Workshop for others to play. What will you create? To open the level

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Training Guide 1 Basic Construction Overview. (v1.1)

Training Guide 1 Basic Construction Overview. (v1.1) Training Guide 1 Basic Construction Overview (v1.1) Contents Training Guide 1 Basic Construction Overview... 1 Creating a new project... 3 Entering Measurements... 6 Adding the Walls... 10 Inserting Doors

More information

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB

**IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB **IT IS STRONGLY RECOMMENDED THAT YOU WATCH THE HOW-TO VIDEOS (BY PROF. SCHULTE-GRAHAME), POSTED ON THE COURSE WEBSITE, PRIOR TO ATTEMPTING THIS LAB GETTING STARTED Step 1. Login to your COE account with

More information

FL STUDIO. Getting Started Manual. IMPORTANT: Write your code above for safe-keeping. See how to use it, page 5.

FL STUDIO. Getting Started Manual. IMPORTANT: Write your code above for safe-keeping. See how to use it, page 5. FL STUDIO Getting Started Manual IMPORTANT: Write your code above for safe-keeping. See how to use it, page 5. 1 Information in this document is subject to change without notice and does not represent

More information

METAL TEXT EFFECT. Step 1: Create A New Document. Step 2: Fill The Background With Black

METAL TEXT EFFECT. Step 1: Create A New Document. Step 2: Fill The Background With Black METAL TEXT EFFECT In this text effects tutorial, we ll learn how to easily create metal text, a popular effect widely used in video games and movie posters! It may seem like there s a lot of steps involved,

More information

Experiment 1 Introduction to Simulink

Experiment 1 Introduction to Simulink 1 Experiment 1 Introduction to Simulink 1.1 Objective The objective of Experiment #1 is to familiarize the students with simulation of power electronic circuits in Matlab/Simulink environment. Please follow

More information

Creating Photo Borders With Photoshop Brushes

Creating Photo Borders With Photoshop Brushes Creating Photo Borders With Photoshop Brushes Written by Steve Patterson. In this Photoshop photo effects tutorial, we ll learn how to create interesting photo border effects using Photoshop s brushes.

More information

Step It Up a Rung from AutoCAD Designs to AutoCAD Electrical

Step It Up a Rung from AutoCAD Designs to AutoCAD Electrical Step It Up a Rung from AutoCAD Designs to AutoCAD Electrical Todd Schmoock Synergis Technologies MA4762-L: AutoCAD Electrical has proven to be easy for creating electrical controls system designs. It has

More information

PLEASE NOTE: EVERY ACTIVITY IN THIS SECTION MUST BE SAVED AS A WAV AND UPLOADED TO YOUR BOX.COM FOLDER FOR GRADING.

PLEASE NOTE: EVERY ACTIVITY IN THIS SECTION MUST BE SAVED AS A WAV AND UPLOADED TO YOUR BOX.COM FOLDER FOR GRADING. PLEASE NOTE: EVERY ACTIVITY IN THIS SECTION MUST BE SAVED AS A WAV AND UPLOADED TO YOUR BOX.COM FOLDER FOR GRADING. Multitrack Recording There will often be times when you will want to record more than

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

SAVING, LOADING AND REUSING LAYER STYLES

SAVING, LOADING AND REUSING LAYER STYLES SAVING, LOADING AND REUSING LAYER STYLES In this Photoshop tutorial, we re going to learn how to save, load and reuse layer styles! Layer styles are a great way to create fun and interesting photo effects

More information