June 2, All parts and drawings were made in SolidEdge. Those interested in the electronic files should see our website.

Size: px

Start display at page:

Download "June 2, All parts and drawings were made in SolidEdge. Those interested in the electronic files should see our website."

Clifton Woods
5 years ago
Views:

1 June 2, 20 Notes on the drawing package: There are 3 sets of drawings The series this is assemblies The P series this is parts that have to be made The H series this is hardware, or was meant to be. Now it s all premade components that are either used as is (the drawings are only for reference) or premade components that need some modification as noted. In general we used pretty high quality parts and materials, and it s reflected in the price. Substitutions may be possible and we have tried to give enough information so you can match specifications or dimensions. ll parts and drawings were made in SolidEdge. Those interested in the electronic files should see our website.

2 Ohio University Mechanical Engineering Team Ramp It Up Purchased components list Senior Design 20 Component Model/prodouct/item# Quantity Vendor Cost (ea.) DWG# (has additional information) DPDT Relay RLY allelectronics.com $.25 H-DPDT RELY Push buttons PB-2 & PB-24 4 allelectronics.com $3.75 H-PUSHBUTTONS SPDT Relay RLY-63 4 allelectronics.com $.5 H-SPDT RELY Toggle switches (SPDT) STS-7B 2 allelectronics.com $2.55 ctuator Plug (2pin) alliedelec.com $3.64 Control Box alliedelec.com $28.60 H-CONTROL BOX-BSE & LID Control Box Plug (8pin) alliedelec.com $3.57 Motor Housing alliedelec.com $7. H-MOTOR HOUSING-BSE & LID Battery IK Cabela's $38.94 H-BTTERY Linear ctuator F e-motionllc.com $34.4 H-LINER CTUTOR 3/8-6 x 7/8" bolts and nuts 4 Local (Lowes) $.25 llegator clips Local (Lowes) $2.00 luminum rivets (small) box Local (Lowes) $5.00 Drawer Slides 22" Local (Lowes) $6.00 H-DRWER SLIDE-INSIDE & OUTSIDE Fuses (5) and huse holder Local (Lowes) $3.00 Rubber Grommets 4 Local (Lowes) $0.75 /4" x 2" pin and cotter pins 4 Local (TSC) $0.50 Ball Transfer 6460K4 McMaster Carr $7.25 H-BLL TRNSFER Motor 6409K McMaster Carr $44.96 H-MOTOR

3 RMPS TOP (ramp 5in and motor shaft thing.asm) P RMPS TOP (ramp top (5in) section.psm) P RMPS BRCKET (motor shaft attach to ramp bracket.par) P STND CHNNEL (2 x.5 C channel 33in long.par) P STND JOINT (elbow joint quarter circle.par) STND TOP (Stand Top Section With Motor Housing v.2.asm) P STND LEG (0.75 elbow.par) H MOTOR HOUSING BSE (Motor housing box.par) MOTOR HOUSING (motor housing assembly.asm) H MOTOR (Motor.par) STND (stand and motor v.2.asm) H MOTOR HOUSING BRCKET (2 x 2 angle iron.par) H MOTOR HOUSING LID (Motor housing lid.par) LEG (T shaped leg 2.asm) P LEG HORIZONTL ( x square leg horizontal.par) P LEG VERTICL ( x square leg vertical.par) RMPS MIDDLE (Ramp Top assembly.asm) P RMPS MIDDLE (ramp middle section.psm) H DRWER SLIDE OUTSIDE (drawer slide outside.par) H BTTERY (battery.par) FULL (FULL SSEMBLY.asm) P RMPS BOTTOM (ramp bottom section.psm) H DRWER SLIDE INSIDE (drawer slide inside.par) RMPS (Ramp ssembly Full.asm) RMPS BOTTOM (Ramp Bottom ssembly.asm) P RMPS TRINGLE (joels triangle.psm) H BLL TRNSFER (Roller Ball.par) P FLP (flap.par) H LINER CTUTOR (ctuator.asm) P CTUTOR BRCKETS (ctuator Mounts.par) H CTUTOR SHFT (ctuator Shaft.par) H CTUTOR BODY (ctuator Main Body.par) H CONROL BOX BSE (Control Box.par) CONTROL BOX (Control Box ssembly.asm) H CONTROL BOX LID (Control Box Lid.par) H PUSHBUTTON (Green Pushbutton.par) (Red Pushbutton.par) H DPDT RELY (DPDT Relay.par) H SPDT RELY (SPDT Relay.par)

4 Item Number Document Number Title Quantity Throwing box assembly Throwning box 2 -STND Stand assembly 3 -RMPS-TOP Top Ramp assembly 4 -RMPS Ramp ssembly Boccia Ball 6 -CONTROL BOX Control Box 7 H-BTTERY 2V Rechargeable battery 7 DRWN ENG PPR MGR PPR NME DTE 05/30/ Boccia ball ramp SIZE DWG NO B -FULL FILE NME: FULL SSEMBLY.dft SCLE: WEIGHT: SHEET OF

5 2 Item Number Document Number Title Quantity P-RMPS-TOP Top Ramp Section 2 P-RMPS-BRCKET Motor Shaft attaching bracket DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 SIZE DWG NO Top Ramp assembly -RMPS-TOP FILE NME: ramp 5in and motor shaft thing.df SCLE: WEIGHT: SHEET OF 2

6 3.500 Mark and drill holes in ramp with bracket in place. ttach with 0/32 button head screws DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 SIZE DWG NO Top Ramp assembly -RMPS-TOP FILE NME: ramp 5in and motor shaft thing.df SCLE: WEIGHT: SHEET 2 OF 2

7 Item Number Document Number Title Quantity -STND-TOP Stand with out legs 2 -LEG Leg 2 3 /4" x /2" Removable pin DRWN ENG PPR MGR PPR NME DTE 05/30/ Stand assembly SIZE DWG NO B -STND FILE NME: stand and motor v.2.dft SCLE: WEIGHT: SHEET OF

8 Item Number Document Number Title Quantity -RMPS-MIDDLE Middle ramp assembly 2 P-CTUTOR-BRCKETS ctuator brackets 2 3 -RMPS-BOTTOM Bottom ramp assembly 4 H-LINER CTUTOR Linear ctuator 5 /4" x 3/4" Permanent pin DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.063 Ramp ssembly SIZE DWG NO B -RMPS FILE NME: Ramp ssembly Full.dft SCLE: WEIGHT: SHEET OF 2

9 Drill holes in ramps to match the ones already drilled in the brackets. Rivet brackets in place. B Drill holes in ramps to match the ones already drilled in the brackets. Rivet brackets in place. These rivets shouldn't be seen on the inside of the ramps just like the ones that hold the triangle on. DETIL B DETIL DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.063 Ramp ssembly SIZE DWG NO B -RMPS FILE NME: Ramp ssembly Full.dft SCLE: WEIGHT: SHEET OF 2

10 Item Number Document Number Title Quantity H-CONROL BOX-BSE Control Box base 2 H-CONTROL BOX-LID Control Box lid 3 H-PUSHBUTTON Green Pushbutton 2 4 H-PUSHBUTTON Red pushbutton 2 5* H-DPDT RELY DPDT Relay 4 6* H-SPDT RELY SPDT Relay DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES SIZE Control Box (open) DWG NO -CONTROL BOX FILE NME: Control Box ssembly.dft SCLE: WEIGHT: SHEET OF 3

11 3.0 ± Held in place with adhesive (hot glue worked well) DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES SIZE Control Box (open) DWG NO -CONTROL BOX FILE NME: Control Box ssembly.dft SCLE: WEIGHT: SHEET 2 OF 3

12 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES SIZE Control Box (open) DWG NO -CONTROL BOX FILE NME: Control Box ssembly.dft SCLE: WEIGHT: SHEET 3 OF 3

13 DRWN ENG PPR MGR PPR NME DTE jk /30/ DIMENSIONS RE IN INCHES ±0.25 Stand top with motor housing SIZE DWG NO B -STND TOP FILE NME: Stand-Top Section With Motor Housing.d SCLE: WEIGHT: SHEET OF 3

14 7 Item Number Document Number Title Quantity P-STND-CH NNEL Stand top - 2" x /2" x 33" channel P-MOTOR HOUSING-BR CKET Motor housing bracket 2 3 P-STND-LEG 3/4" square tubing for folding part of legs 4 /4" x 3/4" Permanent pin /4" x /2" Removable pin 6 P-STND-JOIN T 7 -MOTOR HOUSING Stand joint hing 2 Motor housing 8 3/8-6 x 7/8" Hex bolt SME B8.2._996S 9 3/8-6 Hex nut, SME B DRWN ENG PPR MGR PPR NME DTE jk /30/ DIMENSIONS RE IN INCHES ±0.25 Stand top with motor housing SIZE DWG NO B -STND TOP FILE NME: Stand-Top Section With Motor Housing.d SCLE: WEIGHT: SHEET 2 OF 3

15 /6 3 3/6 3 3/6 6 DRWN ENG PPR MGR PPR NME jk43806 DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 SIZE Stand top with motor housing DWG NO -STND TOP FILE NME: Stand-Top Section With Motor Hous SCLE: WEIGHT: SHEET 3 OF 3

16 2 Item Number Document Number Title Quantity P-LEG-HORIZONTL " x /8" thickness square tubing 2 P-LEG-VERTICL " x.083 thickness square tubing DRWN ENG PPR MGR PPR NME DTE 05/22/ DIMENSIONS RE IN INCHES ±0.25 SIZE DWG NO Leg -LEG FILE NME: T shaped leg.dft SCLE: WEIGHT: SHEET OF 2

17 /4 /4.5 DRWN ENG PPR MGR PPR NME DTE 05/22/ DIMENSIONS RE IN INCHES ±0.25 SIZE DWG NO Leg -LEG FILE NME: T shaped leg.dft SCLE: WEIGHT: SHEET 2 OF 2

18 2 2 Item Number DRWN ENG PPR MGR PPR Document Number Title Quantity P-RMPS-MIDDLE Middle Ramp Section 2 H-DRWER SLIDE-OUTSIDE Drawer Slide outside 2 NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 Middle ramp assembly SIZE DWG NO -RMPS-MIDDLE FILE NME: Ramp Top assembly.dft SCLE: WEIGHT: SHEET OF 2

19 Flush with lip Drill holes to match drawer slides and rivet in place. 4 rivets is enough.0 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 Middle ramp assembly SIZE DWG NO -RMPS-MIDDLE FILE NME: Ramp Top assembly.dft SCLE: WEIGHT: SHEET 2 OF 2

20 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 Bottom ramp assembly SIZE DWG NO -RMPS-BOTTOM FILE NME: Ramp Bottom ssembly.dft SCLE: WEIGHT: SHEET OF 3

21 Item Number Document Number Title Quantity P-RMPS-BOTTOM Bottom Ramp section 2 H-DRWER SLIDE-INSIDE Drawer slide inside 2 3 P-RMPS-TRINGLE Joel's Triangle 4 H-BLL TRNSFER " Ball Transfer Spot weld triangle and flap to hinge. Fits inside "V" of ramp 5* /4-20 Hex nut, SME B " hinge from Lowes 7 P-FLP Flap B DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 B Bottom ramp assembly SIZE DWG NO -RMPS-BOTTOM FILE NME: Ramp Bottom ssembly.dft SCLE: WEIGHT: SHEET 2 OF 3

22 SECTION - Flush against edge Drill and rivet holes (3 per side) to attach. Rivets should be hidden under triangle Outside drawer slide flush against this lip also SECTION B-B DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 Bottom ramp assembly SIZE DWG NO -RMPS-BOTTOM FILE NME: Ramp Bottom ssembly.dft SCLE: WEIGHT: SHEET 3 OF 3

23 3 2 Item Number Document Number Title Quantity H-MOTOR HOUSING-BSE Motor housing base 2 H-MOTOR 50 in*lbs motor 3 H-MOTOR HOUSING-LID motor housing lid DRWN ENG PPR MGR PPR NME DTE 05/22/ Motor Housing (exploded) SIZE DWG NO -MOTOR HOUSING FILE NME: motor housing assembly.dft SCLE: WEIGHT: SHEET OF

24 O : VIEW - Hole size based on rivets NME DTE 05/30/ DRWN ENG PPR MGR PPR DIMENSIONS RE IN INCHES ±0.063 LL UNMRKED ROUNDS - R.25 Material: sheet metal SIZE ctuator mouting brackets DWG NO P-CTUTOR-BRCKETS FILE NME: ctuator Mounts.dft SCLE: WEIGHT: SHEET OF

25 Material: sheet metal DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 LL ROUNDS - R.25 SIZE DWG NO Flap P-FLP FILE NME: P-FLP.dft SCLE: WEIGHT: SHEET OF

26 Thickness: as avalible from vendor.00 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 T shaped leg horizontal part SIZE DWG NO P-LEG-HORIZONTL FILE NME: P-LEG-HORIZONTL.dft SCLE: WEIGHT: SHEET OF

27 .000 ±0.063 Typical spacing 6.38 O /4 X ±0.063 < DRWN ENG PPR MGR PPR NME DTE J. Kauffman 05/30/ DIMENSIONS RE IN INCHES ±0.25 SIZE T shaped leg vertical part DWG NO P-LEG-VERTICL FILE NME: x square leg vertical.dft SCLE: WEIGHT: SHEET OF

28 ± O 3/8 s/6 X ±.005 Thickness: as avalible from vendor DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 SIZE 2.0 Motor Housing Bracket DWG NO P-MOTOR HOUSING-BRCKET FILE NME: P-MOTOR HOUSING-BRCKET.dft SCLE: WEIGHT: SHEET OF

29 4.0 Round corners 2.0 NME DTE 05/30/ DRWN ENG PPR MGR PPR DIMENSIONS RE IN INCHES NGLES ± LINER ±0.25 MTERIL: l SHEET METL (0.059 THICK) SIZE DWG NO Top ramp section P-RMPS - TOP FILE NME: ramp top (5in) section.dft SCLE: WEIGHT: SHEET OF 2

30 Cut blanks of sheet metal with diameters shown (hole saw works well) and rivet to main body Round from top to bottom h NME DTE 05/30/ DRWN ENG PPR MGR PPR DIMENSIONS RE IN INCHES NGLES ± LINER ±0.25 MTERIL: l SHEET METL (0.059 THICK) DETIL SIZE DWG NO Top ramp section P-RMPS - TOP FILE NME: ramp top (5in) section.dft SCLE: WEIGHT: SHEET 2 OF 2

31 NME DTE 05/30/ DRWN ENG PPR MGR PPR DIMENSIONS RE IN INCHES NGLES ± LINER ±0.25 MTERIL: l SHEET METL (0.059 THICK) Middle ramp section SIZE DWG NO P-RMPS-MIDDLE FILE NME: ramp middle section.dft SCLE: WEIGHT: SHEET OF 2

32 R h NME DTE 05/30/ DRWN ENG PPR MGR PPR DIMENSIONS RE IN INCHES NGLES ± LINER ±0.25 MTERIL: l SHEET METL (0.059 THICK) 3.35 DETIL 3.87 Middle ramp section SIZE DWG NO P-RMPS-MIDDLE FILE NME: ramp middle section.dft SCLE: WEIGHT: SHEET 2 OF 2

33 3.5 B NME DTE 05/30/ DRWN ENG PPR MGR PPR DIMENSIONS RE IN INCHES NGLES ± ±0.25 MTERIL: l SHEET METL (0.059 THICK) Ramp bottom section SIZE DWG NO P-RMPS-BOTTOM FILE NME: ramp bottom section.dft SCLE: WEIGHT: SHEET OF 2

34 h.020 R R.5.5 DETIL B NME DTE 05/30/ DRWN ENG PPR MGR PPR DIMENSIONS RE IN INCHES NGLES ± ±0.25 MTERIL: l SHEET METL (0.059 THICK) DETIL Ramp bottom section SIZE DWG NO P-RMPS-BOTTOM FILE NME: ramp bottom section.dft SCLE: WEIGHT: SHEET 2 OF 2

35 bend 80 bend bend DRWN ENG PPR MGR PPR Scale : NME DTE 05/30/ DIMENSIONS RE IN INCHES NGLES ± Linear ±0.25 MTERIL: STEEL SHEET METL (THICKNESS 0.045) bend 36 Joel's Triangle SIZE DWG NO P-RMPS-TRINGLE FILE NME: joels triangle.dft SCLE: : WEIGHT: SHEET OF 2

36 O /4.5.4 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES NGLES ± Linear ±0.25 MTERIL: STEEL SHEET METL (THICKNESS 0.045) Joel's Triangle SIZE DWG NO P-RMPS-TRINGLE FILE NME: joels triangle.dft SCLE: : WEIGHT: SHEET 2 OF 2

37 B B.625 SECTION - (Rotated 90 deg.).300 O 5/32 tap C C DRWN ENG PPR MGR PPR VIEW C-C NME DTE 05/30/ DIMENSIONS RE IN INCHES NGLES ± motor shaft attach to ramp bracket SIZE DWG NO P-RMPS-BRCKET FILE NME: motor shaft attach to ramp bracke SCLE: WEIGHT: SHEET OF

38 s supplied by vendor.5 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 C channel top of stand SIZE DWG NO P-STND-CHNNEL FILE NME: 2 x.5 C channel 33in long.dft SCLE: WEIGHT: SHEET OF

39 .375 u u u.005 R 3.0 O /4 X3 DRWN ENG PPR MGR PPR NME P. McCafferty DTE 05/9/ DIMENSIONS RE IN INCHES ±0.25 SIZE Elbow Joint Quarter circle DWG NO P-STND-JOINT FILE NME: elbow joint quarter circle.dft SCLE: WEIGHT: SHEET OF

40 O / Thickness as avalible by vendor B u DETIL B.75 R.375 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES ±0.25 O /4 X2 DETIL SIZE DWG NO 3/4" tubing leg P-STND-LEG FILE NME: 0.75 elbow.dft SCLE: WEIGHT: SHEET OF

Purchansed from Cabela's Item: IK-08049 Price (one battery and charger): $38.94 after S&H website: "Cabela's Rechargeable 2-Volt Battery 2-volt, 8-amp batteries.

41 Purchansed from Cabela's Item: IK Price (one battery and charger): $38.94 after S&H website: "Cabela's Rechargeable 2-Volt Battery 2-volt, 8-amp batteries. Leakproof design and maintenance-free operation. vailable in three choices. Battery measures: 4"H x 6"L X 2-/2"W. vailable: # Battery With Charger # Two Batteries With Charger # Battery Only" DRWN ENG PPR MGR PPR NME DTE 05/23/ DIMENSIONS RE IN INCHES FOR REFERENCE ONLY SIZE DWG NO Battery H-BTTERY FILE NME: H-BTTERY.dft SCLE: WEIGHT: SHEET OF

42 4.700 O 3/8 X u.005 O 3/6.000 u O 5/6 Hammond Manufacturing electrical (NEM) enclosure Model: 554G2GY Purchased from llied Electronics alliedelec.com llied Stock #: Price at time of purchase: $7. DRWN ENG PPR MGR PPR NME DTE 05/22/ DIMENSIONS RE IN INCHES ±0.25 SIZE Motor housing base DWG NO H-MOTOR HOUSING-BSE FILE NME: H-MOTOR HOUSING-BSE.dft SCLE: WEIGHT: SHEET OF

43 0-32 threads McMaster-Carr item #: 6409K 2VDC 50 in.*lbs. & 0.6rpm 0.2 full load amps $44.96 at time of purchace DRWN ENG PPR MGR PPR NME DTE 05/9/ DIMENSIONS RE IN INCHES s dimensioned by vendor Motor (from McMaster Carr 6409K) SIZE DWG NO H-MOTOR FILE NME: H-MOTOR.dft SCLE: WEIGHT: SHEET OF

44 u.005 O 7/ u u u.005 O 3/ Hammond Manufacturing electrical (NEM) enclosure Model: 554G2GY Purchased from llied Electronics alliedelec.com llied Stock #: Price at time of purchase: $7. DRWN ENG PPR MGR PPR NME DTE 05/22/ DIMENSIONS RE IN INCHES ±0.063 Motor housing lid SIZE DWG NO H-MOTOR HOUSING-LID FILE NME: H-MOTOR HOUSING-LID.dft SCLE: WEIGHT: SHEET OF

45 Lowes 22" drawer slides (ball bearing type) 7267 Item #: Model #: LS Purchase Price: $5.48 DRWN ENG PPR MGR PPR NME DTE 05/22/ SIZE DWG NO DIMENSIONS RE IN INCHES for reference only Drawer slide inside H-DRWER SLIDE-INSIDE FILE NME: H-DRWER SLIDE-OUTSIDE.dft SHEET OF SCLE: WEIGHT:

46 Lowes 22" drawer slides (ball bearing type) 7267 Item #: Model #: LS Purchase Price: $5.48 DRWN ENG PPR MGR PPR NME DTE 05/22/ SIZE DWG NO DIMENSIONS RE IN INCHES for reference only Drawer slide inside H-DRWER SLIDE-INSIDE FILE NME: H-DRWER SLIDE-INSIDE.dft SHEET OF SCLE: WEIGHT:

.20 /4-20 threads.400.840 McMaster Carr 6460K4 Stud-Mount Ball Transfer Std, " STL Ball, Blk STL Housing, /4-20 X 3/32 Stud $7.25 Each R.

47 .20 /4-20 threads McMaster Carr 6460K4 Stud-Mount Ball Transfer Std, " STL Ball, Blk STL Housing, /4-20 X 3/32 Stud $7.25 Each R.500 DRWN ENG PPR MGR PPR NME DTE 05/30/ DIMENSIONS RE IN INCHES For reference only " Ball Transfer SIZE DWG NO H-BLL TRNSFER FILE NME: H-BLL TRNSFER.dft SCLE: WEIGHT: SHEET OF

48 Item Number Document Number Title Quantity H-CTUTOR-BODY ctuator main body 2 H-CTUTOR-SHFT ctuator shaft 2 Model F Linear ctuator 8" stroke 50lb force Manufactured by Firgelli utomations Bought from e-motionllc.com for $34.4 DRWN ENG PPR MGR PPR NME E. Dora DTE 05/22/ Tubular ctuator SIZE DWG NO H-LINER CTUTOR FILE NME: ctuator.dft SCLE: WEIGHT: SHEET OF

49 B R drill this out to O/4.750 DETIL DETIL B DRWN ENG PPR MGR PPR NME E. Dora DTE 05/9/ DIMENSIONS RE IN INCHES For reference only ctuator Shaft SIZE DWG NO B H-CTUTOR-SHFT FILE NME: ctuator Shaft.dft SCLE: WEIGHT: SHEET OF

50 O B drill this to O/4 DETIL DETIL B DRWN ENG PPR MGR PPR NME E. Dora DTE 05/9/ DIMENSIONS RE IN INCHES For reference only ctuator Main Body SIZE DWG NO B H-CTUTOR-BODY FILE NME: ctuator Main Body.dft SCLE: WEIGHT: SHEET OF

51 8.740 llied Electronics llied Stock # Mfr. (Bud industries) Part # PN-329-C Purchase Price: $28.60 lso See Manufacturers DWG PN O 5/ SECTION - DRWN ENG PPR MGR PPR NME DTE 05/9/ DIMENSIONS RE IN INCHES ±0.25 Control Box Lid SIZE DWG NO H-CONTROL BOX-BSE FILE NME: H-CONTROL BOX-BSE.dft SCLE: WEIGHT: SHEET OF

52 8.740 llied Electronics llied Stock # Mfr. (Bud industries) Part # PN-329-C O Purchase Price: $28.60 lso See Manufacturers DWG PN SECTION - DRWN ENG PPR MGR PPR NME DTE 05/9/ DIMENSIONS RE IN INCHES ±0.063 Control box lid SIZE DWG NO H-CONTROL BOX-LID FILE NME: H-CONTROL BOX-LID.dft SCLE: WEIGHT: SHEET OF

O.880 O.330 O.00.30.200 ll Electronics http://www.allelectronics.com CT# PB-2 & PB-24 Original purchase price: $3.75 ea. 2.465 2.

53 O.880 O.330 O ll Electronics CT# PB-2 & PB-24 Original purchase price: $3.75 ea DRWN ENG PPR MGR PPR NME DTE 05/9/ DIMENSIONS RE IN INCHES For reference only SIZE Push buttons DWG NO H-PUSHBUTTON FILE NME: H-PUSHBUTTON.dft SCLE: WEIGHT: SHEET OF

.500.500.800 ll Electronics http://www.allelectronics.com CT# RLY-497 Original purchase price: $.25 ea.

54 ll Electronics CT# RLY-497 Original purchase price: $.25 ea. DRWN ENG PPR MGR PPR NME DTE 05/9/ DIMENSIONS RE IN INCHES For reference only SIZE Double Pole Double Throw DWG NO H-DPDT RELY FILE NME: H-DPDT RELY.dft SCLE: WEIGHT: SHEET OF

55 ll Electronics CT# RLY-63 Original purchase price: $.5 ea. DRWN ENG PPR MGR PPR NME DTE 05/9/ DIMENSIONS RE IN INCHES For reference only Single Pole Double Throw Relay SIZE DWG NO H-SPDT RELY FILE NME: H-SPDT RELY.dft SCLE: WEIGHT: SHEET OF

Obtained from Omarshauntedtrail.com

Obtained from Omarshauntedtrail.com DaveintheGrave's Halloween Props Animated Crawling Skeleton Build a life-size skeleton torso that realistically crawls across the lawn one arm at a time. 1. Motor Base and Linkage Assembly BASE - I used