Subtractive Manufacturing Exercise #1 Part 3 Key Fob Project Using Velocity CNC Software for the CNC Milling Machine

Size: px
Start display at page:

Download "Subtractive Manufacturing Exercise #1 Part 3 Key Fob Project Using Velocity CNC Software for the CNC Milling Machine"

Transcription

1 Subtractive Manufacturing Exercise #1 Part 3 Key Fob Project Using Velocity CNC Software for the CNC Milling Machine Note: In order to use this set of instructions to produce the required program and part, you must have completed Part 2 of this exercise.

2 Open the Velocity CNC software. At the prompt, select Don t Connect. Note: The only time that you should select Connect is when you are actually preparing to use the CNC milling machine to produce a part.

3 Verify that the correct setup and tooling is in place for producing the G-code program for the CNC Milling Machine. Look at the information located at the top left hand side of the screen. Be sure it reads D&MMILL-V4.stp Velocity.tlg. If the setup or tooling needs to be changed see the instructor.

4 Select Import DXF from the File menu and import the same DXF file that you did for the first part of the exercise. Note: Do not select Open G-code, Open Setup or Open Tooling!

5 As soon as you select your DXF file, a prompt box will appear asking you to save your completed work as a G-code file (.CNC). Save your work as the DXF file name and add the number 2 (this is to indicate the 2nd set of G-code data that will be created for this project). The Velocity CNC software will now be changing the DXF data into G-code data. Note: The original name of the program was keyfob The new name is keyfob

6 The settings on the configuration table will be the same as before with one exception the Final Tool Down depth is be to set at With the incremental setting at.03 and the final tool down setting at -.06, two passes of the machine tool will occur. Two toolpaths will be visible in the emulation.

7 Set the Additional G-codes as before. The Start of File additional codes should read as below.

8 Set the Additional G-codes as before. The End of File additional codes should read as below. G00 Z.5 G00 X0 Y0 M05

9 The goal this time around is to remove all of the toopaths other than the slot shape and the hole. Identify the lines of code to be removed by using the emulator and the editor.

10 The toolpaths should now appear as below. Two paths should be visible for both the hole and the slot.

11 It is now time to merge the G-code created in this part of the exercise with the code produced in the second part of the exercise to create one G-code program. Highlight the code from this part of the exercise and copy it to the clipboard (Control + C).

12 Open the G-code file created for the second part of the exercise.

13 With the first G-code file opened, open the editor.

14 Paste the text from the second file created at the bottom of the first file created. Use Control + V to paste the text.

15 (Import File: keyfob 4515.DXF) (Import Date: 1/13/2016) N10 G00 Z.5 N20 M03 N30 G00 Z0.250 N40 G00 X0.875 Y0.375 N50 G01 Z F5.00 N60 G01 X0.875 Y1.125 F15.00 N70 G01 X1.438 Y1.125 N80 G02 X1.438 Y0.750 I0.000 J N90 G01 X0.875 Y0.750 N100 G00 Z0.250 N110 G00 X1.875 Y0.750 N120 G01 Z F5.00 N130 G01 X2.625 Y0.750 F15.00 N140 G00 Z0.250 N150 G00 X2.875 Y0.563 N160 G01 Z F5.00 N170 G03 X3.063 Y0.375 I0.188 J0.000 F15.00 N180 G01 X3.438 Y0.375 N190 G03 X3.438 Y0.750 I0.000 J0.188 N200 G01 X3.063 Y0.750 N210 G02 X3.063 Y1.125 I0.000 J0.188 N220 G01 X3.438 Y1.125 N230 G02 X3.625 Y0.938 I0.000 J N280 G00 Z0.250 N290 G00 X2.625 Y0.375 N300 G01 Z F5.00 N310 G01 X2.625 Y1.125 F15.00 N320 G00 Z0.250 N330 G00 X1.875 Y1.125 N340 G01 Z F5.00 N350 G01 X1.875 Y0.375 F15.00 N500 G00 Z0.250 N510 G00 Z.5 N520 G00 X0 Y0 N530 M05 N10 G00 Z.5 N20 M03 N30 G00 Z0.250 N510 G00 Z0.250 N520 G00 X4.063 Y0.750 N530 G01 Z F5.00 N540 G02 X4.063 Y0.750 I J0.000 F15.00 N550 G01 Z F5.00 N560 G02 X4.063 Y0.750 I J0.000 F15.00 N570 G00 Z0.250 N580 G00 X0.750 Y0.125 N590 G01 Z F5.00 N600 G01 X3.750 Y0.125 F15.00 N610 G03 X3.750 Y1.375 I0.000 J0.625 N620 G01 X0.750 Y1.375 N630 G03 X0.750 Y0.125 I0.000 J N640 G01 Z F5.00 N650 G01 X3.750 Y0.125 F15.00 N660 G03 X3.750 Y1.375 I0.000 J0.625 N670 G01 X0.750 Y1.375 N680 G03 X0.750 Y0.125 I0.000 J N810 G00 Z0.250 N820 G00 X0 Y0 N830 G00 Z.5 N840 M05 When pasting the two code programs together, remove the end lines of the first program associated with moving toward the origin (X=,Y=0) and stopping the spindle (M05). Also remove the lines of code that are associated with the start of the second program that are associated with starting the spindle (M03). N510 G00 Z.5 N520 G00 X0 Y0 N530 M05 N10 G00 Z.5 N20 M03 N30 G00 Z0.250 N510 G00 Z0.250

16 In the final program, the emulation should indicate that the letters will be cut in one pass and the hole and the slot shaped perimeter will be cut in two passes. Two lines indicate the two passes One line indicates a single pass.

17 Run an emulation. The toolpaths for the letters should indicate a single pass of the cutter. The toolpaths for the hole and slot should indicate two passes of the cutter. If the emulation still shows toolpaths being cut that should not be, repeat the editing process until all issues are resolved. If you have removed too many lines of code or if there are multiple issues with the program, start again from the beginning. If you believe the program to be correct, show me the emulation.

Using Surfcam to Produce a Numeric Control (NC) Program Part #1 Surfcam Demonstration Version Use

Using Surfcam to Produce a Numeric Control (NC) Program Part #1 Surfcam Demonstration Version Use Using Surfcam to Produce a Numeric Control (NC) Program Part #1 Surfcam Demonstration Version Use An Introduction to the CAD/CAM Process Instructions for 3 Axis Programming Using the D&M CNC Milling Machine

More information

MadCAM 2.0: Drill Pattern Toolpath

MadCAM 2.0: Drill Pattern Toolpath MadCAM 2.0: Drill Pattern Toolpath Digital Media Tutorial 2005-2006 MadCAM 2.0 can create a toolpath to drill holes directly into your material. The bit plunges in and out of the material without moving

More information

Toothbrush Holder Project 2D Machining

Toothbrush Holder Project 2D Machining Toothbrush Holder Project 2D Machining Prerequisite Toothbrush Holder drawn and saved as a DXF file in SolidWorks Focus of the Lesson On completion of this exercise you will have: Used the Techsoft 2D

More information

Care and Maintenance of Milling Cutters

Care and Maintenance of Milling Cutters The Milling Machine Care and Maintenance of Milling Cutters The life of a milling cutter can be greatly prolonged by intelligent use and proper storage. Take care to operate the machine at the proper speed

More information

Box Tray Geometry in MasterCAM

Box Tray Geometry in MasterCAM Box Tray Geometry in MasterCAM First thing is to figure out what you are making. The best way is to get graph paper and draw out the tray full size or draw the pockets right on your work piece. Then you

More information

TRAINING PRODUCTS NEW PRODUCTS INSIDE

TRAINING PRODUCTS NEW PRODUCTS INSIDE S INSIDE TRAINING S Partner Partner ONLINE OR BOOKS, THE CHOICE IS YOURS TRAINING S Choose from our full line of Mastercam, SOLIDWORKS and CNC training materials, available in both book or in an online

More information

Kerf Bent Clock Front Geometry in MasterCAM

Kerf Bent Clock Front Geometry in MasterCAM Kerf Bent Clock Front Geometry in MasterCAM Check to make sure the nethasp is working/turned on to network. Go to ALL APPs/Mastercam x8/nethasp After the computer reads the nethasp, these programs should

More information

TRAINING PRODUCTS. p f caminstructor.com 330 Chandos Court, Kitchener, ON, N2A 3C2

TRAINING PRODUCTS. p f caminstructor.com 330 Chandos Court, Kitchener, ON, N2A 3C2 2019 Partner Partner ONLINE OR BOOKS, THE CHOICE IS YOURS Choose from our full line of Mastercam, SOLIDWORKS and CNC training materials, available in both book or in an online format. Textbooks include

More information

MasterCAM for Sculpted Bench

MasterCAM for Sculpted Bench MasterCAM for Sculpted Bench Check to make sure the nethasp is working/turned on to network. Go to ALL APPs/Mastercam x8/nethasp After the computer reads the nethasp, these programs should show up. If

More information

Creating DXF Files. IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger

Creating DXF Files. IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger Creating DXF Files IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger 1. Convert a part to a dxf format When you save a part in Solidworks it is saved as a 3D solid model with all the relationships

More information

MasterCAM for Dresser Valet

MasterCAM for Dresser Valet MasterCAM for Dresser Valet Check to make sure the nethasp is working/turned on to network. Go to ALL APPs/Mastercam x8/nethasp After the computer reads the nethasp, these programs should show up. If not

More information

for Solidworks TRAINING GUIDE LESSON-9-CAD

for Solidworks TRAINING GUIDE LESSON-9-CAD for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working

More information

CAMWorks How To Create CNC G-Code for CO2 Dragsters

CAMWorks How To Create CNC G-Code for CO2 Dragsters Objective: In this chapter we will show how to mill out the axle holes for this CO2 Dragster from the left side. VI.1. Open the previously created file: Dragster axle hole 001.sldprt. VI.2. Select the

More information

Tutorial 1 getting started with the CNCSimulator Pro

Tutorial 1 getting started with the CNCSimulator Pro CNCSimulator Blog Tutorial 1 getting started with the CNCSimulator Pro Made for Version 1.0.6.5 or later. The purpose of this tutorial is to learn the basic concepts of how to use the CNCSimulator Pro

More information

10 x 16 Cutting Board - Juice Groove in MasterCAM

10 x 16 Cutting Board - Juice Groove in MasterCAM 10 x 16 Cutting Board - Juice Groove in MasterCAM Check to make sure the nethasp is working/turned on to network. Go to ALL APPs/Mastercam x8/nethasp After the computer reads the nethasp, these programs

More information

Digital Media Tutorial Written By John Eberhart

Digital Media Tutorial Written By John Eberhart MadCAM MadCAM 5.0: Large 4.1: Large & Medium CNC Tool CNC Path Tool Path Generator Generator Digital Media Tutorial Written By John Eberhart MadCAM is a tool path generator that works inside Rhino. It

More information

Kerf Bent Clock Front Geometry in MasterCAM. Open the MasterCAM application, it should look something like below.

Kerf Bent Clock Front Geometry in MasterCAM. Open the MasterCAM application, it should look something like below. Kerf Bent Clock Front Geometry in MasterCAM Open the MasterCAM application, it should look something like below. First thing is to figure out what you are making.using the measurements from your plans,

More information

CNC Machinery. Module 5: CNC Programming / Milling. IAT Curriculum Unit PREPARED BY. August 2009

CNC Machinery. Module 5: CNC Programming / Milling. IAT Curriculum Unit PREPARED BY. August 2009 CNC Machinery Module 5: CNC Programming / Milling PREPARED BY IAT Curriculum Unit August 2009 Institute of Applied Technology, 2009 ATM313-CNC Module 5: CNC Programming / Milling Module Objectives: 1.

More information

STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 223 INTRODUCTION TO COMPUTER NUMERICAL CONTROL

STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 223 INTRODUCTION TO COMPUTER NUMERICAL CONTROL STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 223 INTRODUCTION TO COMPUTER NUMERICAL CONTROL Prepared by: Daniel Miller Updated by: Daniel Miller (April 2015)

More information

Tutorial 4 - Open Dxf file and create multiple toolpaths (Contour, Pocket and Drill).

Tutorial 4 - Open Dxf file and create multiple toolpaths (Contour, Pocket and Drill). Tutorial 4 - Open Dxf file and create multiple toolpaths (Contour, Pocket and Drill). In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part, another toolpath

More information

Exercise 1. Milling a Part with the Lab-Volt CNC Mill EXERCISE OBJECTIVE

Exercise 1. Milling a Part with the Lab-Volt CNC Mill EXERCISE OBJECTIVE Exercise 1 Milling a Part with the Lab-Volt CNC Mill EXERCISE OBJECTIVE When you have completed this exercise, you will be able to engrave text on square pieces of stock, using the Lab-Volt CNC Mill, model

More information

AC : IMPLEMENTATION OF CAD/CAM/CNC CURRICULUM USING MASTERCAM X SOFTWARE IN TECHNICAL PROGRAMS

AC : IMPLEMENTATION OF CAD/CAM/CNC CURRICULUM USING MASTERCAM X SOFTWARE IN TECHNICAL PROGRAMS AC 2008-297: IMPLEMENTATION OF CAD/CAM/CNC CURRICULUM USING MASTERCAM X SOFTWARE IN TECHNICAL PROGRAMS Farzin Heidari, Texas A&M University, Kingsville American Society for Engineering Education, 2008

More information

Projects. 5 For each component, produce a drawing showing the intersection BO.O. C'BORE 18 DIA x 5 DEEP FROM SECTION ON A - A

Projects. 5 For each component, produce a drawing showing the intersection BO.O. C'BORE 18 DIA x 5 DEEP FROM SECTION ON A - A Projects ~ Figure Pl Project 1 If you have worked systematically through the assignments in this workbook, you should now be able to tackle the following milling and turning projects. It is suggested that

More information

Total Related Training Instruction (RTI) Hours: 144

Total Related Training Instruction (RTI) Hours: 144 Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Specialized CNC Controls Fanuc Haas Mazak Unit : CNC Programming Creating a CNC Program Calculation for Programming Canned Cycles Unit : CNC

More information

Evaluation Instructions Machining Level II CNC Milling

Evaluation Instructions Machining Level II CNC Milling Evaluation Instructions Machining Level II CNC Milling General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the criteria for performance

More information

Operations Manual for Machines Equipped with a Rotary Axis Supplement to the WinCNC Operations Manual. 6/1/2015 Laguna Tools

Operations Manual for Machines Equipped with a Rotary Axis Supplement to the WinCNC Operations Manual. 6/1/2015 Laguna Tools Operations Manual for Machines Equipped with a Rotary Axis Supplement to the WinCNC Operations Manual 6/1/2015 Laguna Tools TABLE OF CONTENTS Overview... 3 Safety Warning... 3 Preliminary Checks... 4 Verify

More information

CAMWorks How To Create CNC G-Code for CO2 Dragsters

CAMWorks How To Create CNC G-Code for CO2 Dragsters Creating the Left Side Smooth Finish Tool Path. This chapter will focus on the steps for creating the left side smooth finish tool path. The objective of this chapter is to create to an accurate and highly

More information

Fusion 360 Part Setup. Tutorial

Fusion 360 Part Setup. Tutorial Fusion 360 Part Setup Tutorial Table of Contents MODEL SETUP CAM SETUP TOOL PATHS MODEL SETUP The purpose of this tutorial is to demonstrate start to finish, importing a machineable part to generating

More information

EASY CNC. Table of Contents

EASY CNC. Table of Contents Square 1 Electronics announces its new book by David Benson, "Easy CNC", A Beginner's Guide to CNC" The complete table of contents follows: This book was written by David Benson (8-1/2 x 11", 200 pages,

More information

Preview Sample. Date: September 1, 2010 Author: Matthew Manton and Duane Weidinger ISBN:

Preview Sample. Date: September 1, 2010 Author: Matthew Manton and Duane Weidinger ISBN: Computer Numerical Control Workbook Generic Lathe Published by CamInstructor Incorporated 330 Chandos Crt. Kitchener, Ontario N2A 3C2 www.caminstructor.com Date: September 1, 2010 Author: Matthew Manton

More information

2 ¾ D Machining On a 4 Axis RF-30 Mill/Drill, version 1.4

2 ¾ D Machining On a 4 Axis RF-30 Mill/Drill, version 1.4 2 ¾ D Machining On a 4 Axis RF-30 Mill/Drill, version 1.4 By R. G. Sparber Copyleft protects this document. 1 It would not be hard to make this part with a 5 axis screw machine and the related 3D software

More information

Pro/NC. Prerequisites. Stats

Pro/NC. Prerequisites. Stats Pro/NC Pro/NC tutorials have been developed with great emphasis on the practical application of the software to solve real world problems. The self-study course starts from the very basic concepts and

More information

Conversational Programming. Alexsys Operator Manual

Conversational Programming. Alexsys Operator Manual Conversational Programming Alexsys Operator Manual Alexsys Operator Manual 1. Overview ALEXSYS is a programming system for CNC machining centers. That combines features of CAD / CAM systems with typical

More information

Controlled Machine Tools

Controlled Machine Tools ME 440: Numerically Controlled Machine Tools CNCSIMULATOR Choose the correct application (Milling, Turning or Plasma Cutting) CNCSIMULATOR http://www.cncsimulator.com Teaching Asst. Ergin KILIÇ (M.S.)

More information

CNC Turning Training CNC MILLING / ROUTING TRAINING GUIDE. Page 1

CNC Turning Training CNC MILLING / ROUTING TRAINING GUIDE.  Page 1 CNC Turning Training www.denford.co.uk Page 1 Table of contents Introduction... 3 Start the VR Turning Software... 3 Configure the software for the machine... 4 Load your CNC file... 5 Configure the tooling...

More information

HAAS AUTOMATION, INC. PROGRAMMING MILL SERIES WORKBOOK ANSWERS HAAS AUTOMATION, INC STURGIS ROAD OXNARD, CA

HAAS AUTOMATION, INC. PROGRAMMING MILL SERIES WORKBOOK ANSWERS HAAS AUTOMATION, INC STURGIS ROAD OXNARD, CA HAAS AUTOMATION, INC. MILL SERIES PROGRAMMING WORKBOOK HAAS AUTOMATION, INC. 2800 STURGIS ROAD OXNARD, CA 93030 www.haascnc.com 800-331-6746 ANSWERS PROGRAMMING HAAS AUTOMATION INC. 2800 Sturgis Road Oxnard,

More information

Getting Started. Terminology. CNC 1 Training

Getting Started. Terminology. CNC 1 Training CNC 1 Training Getting Started What You Need for This Training Program This manual 6 x 4 x 3 HDPE 8 3/8, two flute, bottom cutting end mill, 1 Length of Cut (LOC). #3 Center Drill 1/4 drill bit and drill

More information

CNC Machine Feedback Devices

CNC Machine Feedback Devices CNC Machine Feedback Devices Operational Features of CNC Machine A CNC control system includes a velocity loop within an axis drive system and a position loop external to the axis drive system. Lecture

More information

CNC Router Part 2 Training Tutorial

CNC Router Part 2 Training Tutorial CNC Router Part 2 Training Tutorial Prepared by Steve Pilon - Version 1.1 September 2017 A Index B - Intro A- Index B- Intro C- Objective D- Required Items E- Opening CamBam and Loading a DXF F- Preparing

More information

MANUFACTURING PROCESSES

MANUFACTURING PROCESSES 1 MANUFACTURING PROCESSES - AMEM 201 Lecture 5: Milling Processes DR. SOTIRIS L. OMIROU Milling Machining - Definition Milling machining is one of the very common manufacturing processes used in machinery

More information

MACH3 TURN ARC MOTION 6/27/2009 REV:0

MACH3 TURN ARC MOTION 6/27/2009 REV:0 MACH3 TURN - ARC MOTION PREFACE This is a tutorial about using the G2 and G3 g-codes relative to Mach3 Turn. There is no simple answer to a lot of the arc questions posted on the site relative to the lathe.

More information

In this tutorial you will open a Dxf file and create the toolpath to remove the material contained in a closed profile.

In this tutorial you will open a Dxf file and create the toolpath to remove the material contained in a closed profile. Tutorial 3 - Open Dxf file and create the Pocket toolpath. In this tutorial you will open a Dxf file and create the toolpath to remove the material contained in a closed profile. Caution: CNC machines

More information

Trade of Sheet Metalwork. Module 7: Introduction to CNC Sheet Metal Manufacturing Unit 7: CNC Setting & Operation Phase 2

Trade of Sheet Metalwork. Module 7: Introduction to CNC Sheet Metal Manufacturing Unit 7: CNC Setting & Operation Phase 2 Trade of Sheet Metalwork Module 7: Introduction to CNC Sheet Metal Manufacturing Unit 7: CNC Setting & Operation Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History...

More information

Designed for Vectric by Michael Tyler

Designed for Vectric by Michael Tyler Project Tutorial Compatible with Current Version of: Featuring compatibility with nearly all CNC Machines Petit Gothique Wall Shelf Designed for Vectric by Michael Tyler It is our pleasure to provide our

More information

In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part.

In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part. Tutorial 2 - Open Dxf file and create the outside Contour toolpath. In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part. Caution: CNC machines are potentially

More information

Basic Digital Read-Out Functionality on a Mill

Basic Digital Read-Out Functionality on a Mill Basic Digital Read-Out Functionality on a Mill By R. G. Sparber Copyleft protects this document 1. There is a running joke among owners of Digital Read-Out (DRO) What is the cleanest thing in any shop?

More information

VisualCAM 2018 TURN Quick Start MecSoft Corporation

VisualCAM 2018 TURN Quick Start MecSoft Corporation 2 Table of Contents About this Guide 4 1 About... the TURN Module 4 2 Using this... Guide 4 3 Useful... Tips 5 Getting Ready 7 1 Running... VisualCAM 2018 7 2 About... the VisualCAD Display 7 3 Launch...

More information

G02 CW / G03 CCW Circular Interpolation Motion (Group 01) - Mill

G02 CW / G03 CCW Circular Interpolation Motion (Group 01) - Mill Haas Technical Documentation G02 CW / G03 CCW Circular Interpolation Motion (Group 01) - Mill Scan code to get the latest version of this document Translation Available G02 CW / G03 CCW Circular Interpolation

More information

Project Tutorial. Project material list for Edge Lit LED Signs: 1-12 x8 x.25 Hardwood Blanks 1-8 x8 x.220 Acrylic Sheet Various grade of sandpaper

Project Tutorial. Project material list for Edge Lit LED Signs: 1-12 x8 x.25 Hardwood Blanks 1-8 x8 x.220 Acrylic Sheet Various grade of sandpaper Compatible with the Current Version of This month s project s Edge Lit LED Signs. The samples were made using Walnut, Maple and Alder however, you might use woods of your own choosing. We recommend using

More information

Basic NC and CNC. Dr. J. Ramkumar Professor, Department of Mechanical Engineering Micro machining Lab, I.I.T. Kanpur

Basic NC and CNC. Dr. J. Ramkumar Professor, Department of Mechanical Engineering Micro machining Lab, I.I.T. Kanpur Basic NC and CNC Dr. J. Ramkumar Professor, Department of Mechanical Engineering Micro machining Lab, I.I.T. Kanpur Micro machining Lab, I.I.T. Kanpur Outline 1. Introduction to CNC machine 2. Component

More information

CAMWorks How To Create CNC G-Code for CO2 Dragsters. III.1. Save the rough tool path for the bottom of the CO2 Dragster as Dragster bottom 001 rough.

CAMWorks How To Create CNC G-Code for CO2 Dragsters. III.1. Save the rough tool path for the bottom of the CO2 Dragster as Dragster bottom 001 rough. In this chapter we will create the smooth G-Code tool path for the bottom of our CO2 Dragster. The smooth tool path is necessary to create a finish that requires minimal work to for the designer to later

More information

CAD/CAM/CAE Computer Aided Design/Computer Aided Manufacturing/Computer Aided Manufacturing. Part-10 CNC Milling Programming

CAD/CAM/CAE Computer Aided Design/Computer Aided Manufacturing/Computer Aided Manufacturing. Part-10 CNC Milling Programming CAD/CAM/CAE Computer Aided Design/Computer Aided Manufacturing/Computer Aided Manufacturing Part-10 CNC Milling Programming To maximize the power of modern CNC milling machines, a programmer has to master

More information

ENGI 7962 Mastercam Lab Mill 1

ENGI 7962 Mastercam Lab Mill 1 ENGI 7962 Mastercam Lab Mill 1 Starting a Mastercam file: Once the SolidWorks models is complete (all sketches are Fully Defined), start up Mastercam and select File, Open, Files of Type, SolidWorks Files,

More information

Mill Safety Competencies

Mill Safety Competencies Mill Safety Competencies The following list of competencies is presented to ensure the contents of a training program from a perspective of safety. Additional instruction in actual tool use would augment

More information

How to Calibrate a CNC Machine's Positioning System

How to Calibrate a CNC Machine's Positioning System How to Calibrate a CNC Machine's Positioning System Guide to calibrating the Haas wireless intuitive probing system. Written By: Kim Payne 2018 gunnerautomotive.dozuki.com/ Page 1 of 20 INTRODUCTION Attention:

More information

Learn How to Optimize Heat Exchanger Designs using Aspen Shell & Tube Mechanical

Learn How to Optimize Heat Exchanger Designs using Aspen Shell & Tube Mechanical Learn How to Optimize Heat Exchanger Designs using Aspen Shell & Tube Mechanical A self guided demo to get started with Aspen Shell & Tube Mechanical Why Use Aspen Shell & Tube Mechanical? Aspen Shell

More information

CNC Plasma Reference Guide. Winter Quarter

CNC Plasma Reference Guide. Winter Quarter CNC Plasma Reference Guide Winter Quarter 2017 General Guidelines Shade 5 eye protection must be worn while the torch is in operation. Drill or punch holes within parts rather than using the plasma cutter.

More information

Syslog Technologies Innovative Thoughts

Syslog Technologies Innovative Thoughts MINI MILLING MACHINE SYNOPSIS A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or end mill which rotates

More information

Machinist--Cert Students apply industry standard safety practices and specific safety requirements for different machining operations.

Machinist--Cert Students apply industry standard safety practices and specific safety requirements for different machining operations. MTT Date: 09/13/2018 TECHNOLOGY MTT Machine Tool Technology--AA Students apply industry standard safety practices and specific safety requirements for different machining operations. Students calculate

More information

Kerf Bent Clock Front Toolpaths in MasterCAM. Open the MasterCAM application and open your clock front geometry file.

Kerf Bent Clock Front Toolpaths in MasterCAM. Open the MasterCAM application and open your clock front geometry file. Kerf Bent Clock Front Toolpaths in MasterCAM Open the MasterCAM application and open your clock front geometry file. For 2D geometry such as we have, there are 2 main types of tool paths. The first one

More information

PCB and RF Antenna Design with automatic tool change

PCB and RF Antenna Design with automatic tool change MIPEC 4MILL300ATC PCB and RF Antenna Design with automatic tool change MIPEC can handle standard Single side and Double sided PCB designs, SMD, RF and various other applications. 4MILL300ATC with automatic

More information

Design & Manufacturing II. The CAD/CAM Labs. Lab I Process Planning G-Code Mastercam Lathe

Design & Manufacturing II. The CAD/CAM Labs. Lab I Process Planning G-Code Mastercam Lathe 2.008 Design & Manufacturing II The CAD/CAM Labs Lab I Process Planning G-Code Mastercam Lathe Lab II Mastercam Mill Check G-Code Lab III CNC Mill & Lathe Machining OBJECTIVE BACKGROUND LAB EXERCISES DELIVERABLES

More information

CNC Cut Sawhorse. Written By: Eric Schimelpfenig

CNC Cut Sawhorse. Written By: Eric Schimelpfenig CNC Cut Sawhorse Learn to CNC cut your own sawhorse. It's easy to cut on any CNC machine. Sawhorses are elegant and strong. Just about any 3/4" plywood can be used. Written By: Eric Schimelpfenig 2017

More information

IENG 475 Computer-Controlled Manufacturing Systems 2/7/2017. Lab 03: Manual Milling and Turning Operations

IENG 475 Computer-Controlled Manufacturing Systems 2/7/2017. Lab 03: Manual Milling and Turning Operations I. Purpose Lab 03: Manual Milling and Turning Operations A.) B.) C.) D.) Provide an overview of safety considerations for the CNC Mill Provide manual experience using the laboratory s CNC Mill Provide

More information

CNC PROGRAMMING WORKBOOK. Sample not for. Distribution MILL & LATHE. By Matthew Manton and Duane Weidinger

CNC PROGRAMMING WORKBOOK. Sample not for. Distribution MILL & LATHE. By Matthew Manton and Duane Weidinger CNC PROGRAMMING WORKBOOK MILL & LATHE By Matthew Manton and Duane Weidinger CNC Programming Workbook Mill & Lathe Published by: CamInstructor Incorporated 330 Chandos Crt. Kitchener, Ontario N2A 3C2 www.caminstructor.com

More information

Computation & Construction Lab. Stinger CNC 3D Milling Workflow

Computation & Construction Lab. Stinger CNC 3D Milling Workflow Computation & Construction Lab Stinger CNC 3D Milling Workflow 3D Single Sided Milling Guidelines - The following steps will guide the user on how to transfer digital work from a design software to setting

More information

Optimization of Cycle Time through Mastercam Virtual Simulation and Four Axis CNC Milling Machining of Camshaft

Optimization of Cycle Time through Mastercam Virtual Simulation and Four Axis CNC Milling Machining of Camshaft ISSN: 2454-132X Impact factor: 4.295 (Volume2, Issue6) Available online at: www.ijariit.com Optimization of Cycle Time through Mastercam Virtual Simulation and Four Axis CNC Milling Machining of Camshaft

More information

Module 2. Milling calculations, coordinates and program preparing. 1 Pepared By: Tareq Al Sawafta

Module 2. Milling calculations, coordinates and program preparing. 1 Pepared By: Tareq Al Sawafta Module 2 Milling calculations, coordinates and program preparing 1 Module Objectives: 1. Calculate the cutting speed, feed rate and depth of cut 2. Recognize coordinate 3. Differentiate between Cartesian

More information

Precious Notions Box!

Precious Notions Box! PASSIONATE ABOUT CNC Compatible with Current Version of: and Project Tutorial For more FREE projects visit - Designed for Vectric by Michael Tyler Sample Carved with: ShopBot Buddy PRSalpha BT48 www.shopbottools.com

More information

Conversational CAM Manual

Conversational CAM Manual Legacy Woodworking Machinery CNC Turning & Milling Machines Conversational CAM Manual Legacy Woodworking Machinery 435 W. 1000 N. Springville, UT 84663 2 Content Conversational CAM Conversational CAM overview...

More information

For more information on how you can download and purchase Clickteam Fusion 2.5, check out the website

For more information on how you can download and purchase Clickteam Fusion 2.5, check out the website INTRODUCTION Clickteam Fusion 2.5 enables you to create multiple objects at any given time and allow Fusion to auto-link them as parent and child objects. This means once created, you can give a parent

More information

Trade of Toolmaking. Module 6: Introduction to CNC Unit 2: Part Programming Phase 2. Published by. Trade of Toolmaking Phase 2 Module 6 Unit 2

Trade of Toolmaking. Module 6: Introduction to CNC Unit 2: Part Programming Phase 2. Published by. Trade of Toolmaking Phase 2 Module 6 Unit 2 Trade of Toolmaking Module 6: Introduction to CNC Unit 2: Part Programming Phase 2 Published by SOLAS 2014 Unit 2 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4

More information

CNC: Rhinocam. Sullivan Fabrication Studio Version 5.1 (beta)

CNC: Rhinocam. Sullivan Fabrication Studio Version 5.1 (beta) CNC: Rhinocam Sullivan Fabrication Studio Version 5.1 (beta) TABLE OF CONTENTS Develop a CNC Rhino File.............. 1. Import Model...6 7 2. Define Stock...8 9 3. Fit Parts On Stock.................

More information

MAXYM Mortiser Operating Manual

MAXYM Mortiser Operating Manual MAXYM Mortiser Operating Manual Rev 2.112/16/02 Copyright MAXYM Technologies Inc. Table of Contents Visual Tour 1-2 Operating the Maxym Mortiser 3 Starting the Mortiser 3 Touch Screen Description 3 Mortise

More information

MEB560 MANUFACTURING TECHNOLOGY - II PRACTICAL

MEB560 MANUFACTURING TECHNOLOGY - II PRACTICAL MEB560 MANUFACTURING TECHNOLOGY - II PRACTICAL OBJECTIVES: Identify a milling machine and its parts Identify a cylindrical grinder, surface grinder and tool and cutter grinder Identify the tools and instruments

More information

Engraving Stainless Steel. To engrave stainless steel, we use a number of techniques to overcome the inherent problems of machining a hard surface.

Engraving Stainless Steel. To engrave stainless steel, we use a number of techniques to overcome the inherent problems of machining a hard surface. Engraving Stainless Steel To engrave stainless steel, we use a number of techniques to overcome the inherent problems of machining a hard surface. In 99% of cases, the one item that will cause the most

More information

Finding Offsets for Multiple Spindles/Air Drills

Finding Offsets for Multiple Spindles/Air Drills 888-680-4466 ShopBotTools.com Finding Offsets for Multiple Spindles/Air Drills Copyright 2016 ShopBot Tools, Inc. page 1 Copyright 2016 ShopBot Tools, Inc. page 2 Introduction This document explains how

More information

An Introduction to CNC

An Introduction to CNC DREAM IT DESIGN IT DO IT An Introduction to CNC For help, call 011 036 6062 or 021 839 5594, or send an email to techsupport@perfectlaser.co.za Introduction to CNC If you re new to the world of CNC (or

More information

CNC Lathe Programming-Basic

CNC Lathe Programming-Basic Western Technical College 31420312 CNC Lathe Programming-Basic Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 An introduction to planning and

More information

FROM: Contest Chair Ben Richardson

FROM: Contest Chair Ben Richardson TO: SkillsUSA contestants - Tennessee Automated Mfg. Technology (AMT) FROM: Contest Chair Ben Richardson ben.richardson@lli.com 800-334-4943 General Info The contest listed above will be held March 20

More information

LinuxCNC Help for the Sherline Machine CNC System

LinuxCNC Help for the Sherline Machine CNC System WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING LinuxCNC Help for the Sherline Machine CNC System LinuxCNC Help for Programming and Running 1. Here is a link

More information

FC3920K and FC5539K Automatic Foam Cutting CNC Machines

FC3920K and FC5539K Automatic Foam Cutting CNC Machines FC3920K and FC5539K Automatic Foam Cutting CNC Machines Disclaimer You accept all risks and responsibilities for looses, damages costs and other consequences resulting directly or indirectly from using

More information

Evaluation Instructions Machining Level II Milling: Precision Locations

Evaluation Instructions Machining Level II Milling: Precision Locations Evaluation Instructions Machining Level II Milling: Precision Locations General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the

More information

Milling and turning with SINUMERIK:

Milling and turning with SINUMERIK: Milling and turning with SINUMERIK: CNC solutions for the shopfloor SINUMERIK Answers for industry. Simple to set up... Contents Shopfloor solutions for CNC machines with SINUMERIK Milling with the SINUMERIK

More information

When the machine makes a movement based on the Absolute Coordinates or Machine Coordinates, instead of movements based on work offsets.

When the machine makes a movement based on the Absolute Coordinates or Machine Coordinates, instead of movements based on work offsets. Absolute Coordinates: Also known as Machine Coordinates. The coordinates of the spindle on the machine based on the home position of the static object (machine). See Machine Coordinates Absolute Move:

More information

MACHINIST TECHNICIAN - LATHE (582)

MACHINIST TECHNICIAN - LATHE (582) DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,

More information

Setting Part Zero and Setting Cutting Tool for Wheel Lathe

Setting Part Zero and Setting Cutting Tool for Wheel Lathe There are three sections in this document: A: Setting Tool #1 and Tool #2 on center line height to the spindle which are explained in steps 1 thru 3 B: Setting Part 0 for X & Z and setting X & Z reference

More information

FABLAB O SHANGHAI FABO ACADEMY X CHINA

FABLAB O SHANGHAI FABO ACADEMY X CHINA FABLAB O SHANGHAI FABO ACADEMY X CHINA Fablab O Shanghai Fabo Academy X China, is a 8 week course into digital manufacturing and rapid prototyping. The course is based on MIT s How To Make (Almost) Anything

More information

CNC Applications. Programming Machining Centers

CNC Applications. Programming Machining Centers CNC Applications Programming Machining Centers Planning and Programming Just as with the turning center, you must follow a series of steps to create a successful program: 1. Examine the part drawing thoroughly

More information

Techno LC Series 4848 CNC Router Tutorial

Techno LC Series 4848 CNC Router Tutorial What is the CNC Router? Techno LC Series 4848 CNC Router Tutorial The CNC (Computer Numerically Controlled) Router is a digitally driven, coordinate based prototyping and production machine. The CNC router

More information

Strands & Standards MACHINING 2

Strands & Standards MACHINING 2 Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill

More information

MultiLine MS22C. CNC Multi spindle turning machine

MultiLine MS22C. CNC Multi spindle turning machine MultiLine MS22C CNC Multi spindle turning machine MultiLine MS22C Precise, fast and flexible The machine concept of the MS22C has been customized to meet user requirements Machine open at the front for

More information

Computer Numeric Control

Computer Numeric Control Computer Numeric Control TA202A 2017-18(2 nd ) Semester Prof. J. Ramkumar Department of Mechanical Engineering IIT Kanpur Computer Numeric Control A system in which actions are controlled by the direct

More information

Virtual Reality CNC Milling for Windows User's Manual.

Virtual Reality CNC Milling for Windows User's Manual. Total Commitment to Education and Training WorldWide. Virtual Reality CNC Milling for Windows User's Manual. Denford Limited reserves the right to alter any specifications and documentation without prior

More information

CNC snowman as tag. Even if there is no snow, the experienced CNC milling expert can produce his own snowman at any time.

CNC snowman as tag. Even if there is no snow, the experienced CNC milling expert can produce his own snowman at any time. CNC snowman as tag Even if there is no snow, the experienced CNC milling expert can produce his own snowman at any time. The workpiece is milled from an aluminum disk. The NC program was generated using

More information

First Access to RhinoCAM from Philipp Außem

First Access to RhinoCAM from Philipp Außem MecSoft Europe GmbH Phone: +49 671 920650-40 E-Mail: info@mecsoft-europe.de Web: http://www.mecsoft-europe.de First Access to RhinoCAM from Philipp Außem Trainee at ehlersdesign in Munich, Germany CAD

More information

CAD/CAM Software & High Speed Machining

CAD/CAM Software & High Speed Machining What is CAD/CAM Software? Computer Aided Design. In reference to software, it is the means of designing and creating geometry and models that can be used in the process of product manufacturing. Computer

More information

Standard. CNC Turning & Milling Machine Rev 1.0. OM5 Control Software Instruction Manual

Standard. CNC Turning & Milling Machine Rev 1.0. OM5 Control Software Instruction Manual Standard CNC Turning & Milling Machine Rev 1.0 OM5 Control Software Instruction Manual Legacy Woodworking Machinery 435 W. 1000 N. Springville, UT 84663 Standard CNC Machine 2 Content Warranty and Repair

More information

CNC Mill Training System (Heavy Duty)

CNC Mill Training System (Heavy Duty) CNC Mill Training System (Heavy Duty) LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018 Table of Contents General Description 2 Features & Benefits 3 List of Equipment 3 List of Manuals

More information

Creating a Multi-axis Machining Postprocessor

Creating a Multi-axis Machining Postprocessor Creating a Multi-axis Machining Postprocessor Petr Vavruška 1 1 Department of Production Machines and Equipment, Faculty of Mechanical Engineering, Czech Technical University in Prague, Horská 3, 128 00

More information