NCERT Solutions Class 7 Mathematics Visualising Solid Shapes Chapter: 15

(Chapter 15) (Visualising Solid Shapes) (Class VII) Question 1: Exercise 15.1 Identify the nets which can be used to make cubes (cut out copies of the nets and try it): Answer 1: Cube s nets are (ii),

NCERT Solution Class 7 Mathematics Symmetry Chapter: 14. Copy the figures with punched holes and find the axes of symmetry for the following:

Downloaded from Q.1) Exercise 14.1 NCERT Solution Class 7 Mathematics Symmetry Chapter: 14 Copy the figures with punched holes and find the axes of symmetry for the following: Sol.1) S.No. Punched holed

LIST OF HANDS-ON ACTIVITIES IN MATHEMATICS FOR CLASSES III TO VIII. Mathematics Laboratory

LIST OF HANDS-ON ACTIVITIES IN MATHEMATICS FOR CLASSES III TO VIII Mathematics Laboratory The concept of Mathematics Laboratory has been introduced by the Board in its affiliated schools with the objective

Class VI Mathematics (Ex. 13.1) Questions

Class VI Mathematics (Ex. 13.1) Questions 1. List any four symmetrical from your home or school. 2. For the given figure, which one is the mirror line, l 1 or l 2? 3. Identify the shapes given below. Check

SHAPE level 2 questions. 1. Match each shape to its name. One is done for you. 1 mark. International School of Madrid 1

SHAPE level 2 questions 1. Match each shape to its name. One is done for you. International School of Madrid 1 2. Write each word in the correct box. faces edges vertices 3. Here is half of a symmetrical

DESIGN AND TECHNOLOGY GRAPHICAL COMMUNICATION COMPONENT Workbook 2. Name: Year 8: School: Marks allotted: 20

DESIGN AND TECHNOLOGY GRAPHICAL COMMUNICATION COMPONENT Workbook 2 Name: Year 8: School: Marks allotted: 20 Design & Technology Graphical Communication Component CONTENTS Section 1. Isometric drawing Section

ENGINEERING GRAPHICS

ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER Time : 3 Hrs Max. Marks : 70 The weightage of the distribution of marks over different contents of the question paper shall be as follows:

Whirlygigs for Sale! Rotating Two-Dimensional Figures through Space. LESSON 4.1 Skills Practice. Vocabulary. Problem Set

LESSON.1 Skills Practice Name Date Whirlygigs for Sale! Rotating Two-Dimensional Figures through Space Vocabulary Describe the term in your own words. 1. disc Problem Set Write the name of the solid figure

Downloaded from

Symmetry 1 1.Find the next figure None of these 2.Find the next figure 3.Regular pentagon has line of symmetry. 4.Equlilateral triangle has.. lines of symmetry. 5.Regular hexagon has.. lines of symmetry.

Chapter 4 ORTHOGRAPHIC PROJECTION

Chapter 4 ORTHOGRAPHIC PROJECTION 4.1 INTRODUCTION We, the human beings are gifted with power to think. The thoughts are to be shared. You will appreciate that different ways and means are available to

Find the area of these shapes: Area. Page 98 A1 A4

Find the area of these shapes: Area Page 98 A1 A4 1 Find the perimeter of these shapes: Draw another shape with area a smaller perimeter. Draw another shape with area a larger perimeter. but with but with

1. Recall of various lines and shapes Descript ion. Reflect and Review (Refer tables 1, 2, 3 below) Table 1. Recall various lines and shapes

1. Recall of variou line and hape Decript ion Recall variou line and hape Reflect and Review (Refer table 1, 2, 3 below) Teaer Anwer 1) Slant ray 2) Rectangle 3) Triangle 4) Oval 5) Cylinder 6) Cuboid

Cross Sections of Three-Dimensional Figures

Domain 4 Lesson 22 Cross Sections of Three-Dimensional Figures Common Core Standard: 7.G.3 Getting the Idea A three-dimensional figure (also called a solid figure) has length, width, and height. It is

Class : VI - Mathematics

O. P. JINDAL SCHOOL, RAIGARH (CG) 496 001 Phone : 07762-227042, 227293, (Extn. 227001-49801, 02, 04, 06); Fax : 07762-262613; e-mail: opjsraigarh@jspl.com; website : www.opjsrgh.in Class : VI - Mathematics

Essential Mathematics Practice Problems for Exam 5 Chapter 8

Math 254B Essential Mathematics Practice Problems for Eam 5 Chapter 8 Name Date This eam is closed book and closed notes, ecept for the Geometry Formula sheet that is provided by the instructor. You can

Shapes and Patterns. Practice 1 Exploring Plane Shapes. Trace the dots. Then match each shape to its name. 1. triangle. square. rectangle.

CHAPTER 5 Shapes and Patterns Practice 1 Exploring Plane Shapes Trace the dots. Then match each shape to its name. 1. triangle square rectangle circle Lesson 1 Exploring Plane Shapes 93 A part of each

KS3 Revision work. Level 6 + = 1

KS3 Revision work Level 6 1. Thinking fractions Write the missing numbers in these fraction sums. 1 + = 1 4 8 1 8 + = 1 3 2. Pi The value of correct to 7 decimal places is: 3.1415927 (a) Write the value

Count the objects after you draw 1 more. Write the number in the box. Use the code to color when you are finished. Draw 1 more face. How many?

Lesson 17 Problem Set Count the objects after you draw 1 more. Write the number in the box. Use the code to color when you are finished. 3 blue 4 red 5 yellow 6 green Draw 1 more cloud. Draw 1 more face.

Grade 6 Middle School Mathematics Contest A parking lot holds 64 cars. The parking lot is 7/8 filled. How many spaces remain in the lot?

Grade 6 Middle School Mathematics Contest 2004 1 1. A parking lot holds 64 cars. The parking lot is 7/8 filled. How many spaces remain in the lot? a. 6 b. 8 c. 16 d. 48 e. 56 2. How many different prime

DEPARTMENT OF MECHANICAL ENGINEERING, IIT DELHI

MEL 110 LABORATORY 1 (to be done in CAGI Lab. Room: III 331) DURATION: 3 Hrs 50 Min. Note: Missing dimensions may be suitably assumed. Exercise 1: Visualize orthographic and isometric views of 3D models/objects:

ENGINEERING GRAPHICS 1E9

Lecture 3 Monday, 15 December 2014 1 ENGINEERING GRAPHICS 1E9 Lecture 3: Isometric Projections Lecture 3 Monday, 15 December 2014 2 What is ISOMETRIC? It is a method of producing pictorial view of an object

Reigate Grammar School. 11+ Entrance Examination January 2012 MATHEMATICS

Reigate Grammar School + Entrance Examination January 0 MATHEMATICS Time allowed: 45 minutes NAME Work through the paper carefully You do not have to finish everything Do not spend too much time on any

Marking Scheme Engineering Graphics

Marking Scheme Engineering Graphics All Questions are to be answered correctly and accurately. General Note: (i) (ii) (iii) (iv) (v) Marks are to be awarded in proportion to the work done. Mistakes in

These are some times as shown on a digital clock. Draw a circle around the two times that could be the same as the clock.

GM3 End-of-unit Test 1 a This is the time as shown on a clock. These are some times as shown on a digital clock. Draw a circle around the two times that could be the same as the clock. 12:09 09:00 19:00

Downloaded from ENGINEERING DRAWING. Time allowed : 3 hours Maximum Marks : 70

ENGINEERING DRAWING Time allowed : 3 hours Maximum Marks : 70 Note : (i) (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimeters. (iv)

UNIT 6 Nets and Surface Area Activities

UNIT 6 Nets and Surface Area Activities Activities 6.1 Tangram 6.2 Square-based Oblique Pyramid 6.3 Pyramid Packaging 6.4 Make an Octahedron 6.5.1 Klein Cube 6.5.2 " " 6.5.3 " " 6.6 Euler's Formula Notes

Section 1: Whole Numbers

Grade 6 Play! Mathematics Answer Book 67 Section : Whole Numbers Question Value and Place Value of 7-digit Numbers TERM 2. Study: a) million 000 000 A million has 6 zeros. b) million 00 00 therefore million

DOWNSEND SCHOOL YEAR 5 EASTER REVISION BOOKLET

DOWNSEND SCHOOL YEAR 5 EASTER REVISION BOOKLET This booklet is an optional revision aid for the Summer Exam Name: Maths Teacher: Revision List for Summer Exam Topic Junior Maths Bk 3 Place Value Chapter

Teacher Workbooks. Mathematics Series Shapes, Volume 1

Teacher Workbooks Mathematics Series Shapes, Volume 1 Copyright 2006 and its licensors. All rights reserved. Teachnology Publishing Company A Division of Teachnology, Inc. For additional information, visit

Instructions to Candidates

SECONDARY SCHOOL ANNUAL EXAMINATIONS 2009 Directorate for Quality and Standards in Education Educational Assessment Unit D FORM 2 MATHEMATICS SCHEME D TIME: 30 minutes Non-Calculator Paper Name: Class:

11 Light NCERT. not to be republished MULTIPLE CHOICE QUESTIONS. 1. Observe the picture given in Fig carefully.

11 Light MULTIPLE CHOICE QUESTIONS 1. Observe the picture given in Fig. 11.1 carefully. Fig. 11.1 A patch of light is obtained at B, when the torch is lighted as shown. Which of the following is kept at

5.3. Area of Polygons and Circles Play Area. My Notes ACTIVITY

Area of Polygons and Circles SUGGESTED LEARNING STRATEGIES: Think/Pair/Share ACTIVITY 5.3 Pictured below is an aerial view of a playground. An aerial view is the view from above something. Decide what

GE 6152 ENGINEERING GRAPHICS

GE 6152 ENGINEERING GRAPHICS UNIT - 4 DEVELOPMENT OF SURFACES Development of lateral surfaces of simple and truncated solids prisms, pyramids, cylinders and cones - Development of lateral surfaces of solids

Downloaded from

Understanding Elementary Shapes 1 1.In the given figure, lines l and m are.. to each other. (A) perpendicular (B) parallel (C) intersect (D) None of them. 2.a) If a clock hand starts from 12 and stops

APMOPS MOCK Test questions, 2 hours. No calculators used.

Titan Education APMOPS MOCK Test 2 30 questions, 2 hours. No calculators used. 1. Three signal lights were set to flash every certain specified time. The first light flashes every 12 seconds, the second

Sample test questions All questions

Ma KEY STAGE 3 LEVELS 3 8 Sample test questions All questions 2003 Contents Question Level Attainment target Page Completing calculations 3 Number and algebra 3 Odd one out 3 Number and algebra 4 Hexagon

Reigate Grammar School. 11+ Entrance Examination January 2014 MATHEMATICS

Reigate Grammar School + Entrance Examination January 204 MATHEMATICS Time allowed: 45 minutes NAME Work through the paper carefully You do not have to finish everything Do not spend too much time on any

Shapes and Patterns. Lesson 1 Exploring Plane Shapes (Part 1) Name the shapes. triangle circle rectangle square Color the squares.

CHAPTER 5 Shapes and Patterns Lesson 1 Exploring Plane Shapes (Part 1) Name the shapes. triangle circle rectangle square 1. 2. 3. 4. Color the squares. 5. Extra Practice 1A 71 Color the shapes that are

Methods in Mathematics (Linked Pair Pilot)

Centre Number Surname Candidate Number For Examiner s Use Other Names Candidate Signature Examiner s Initials Methods in Mathematics (Linked Pair Pilot) Unit 2 Geometry and Algebra Monday 11 November 2013

Set No - 1 I B. Tech I Semester Regular/Supplementary Examinations Jan./Feb ENGINEERING DRAWING (EEE)

Set No - 1 I B. Tech I Semester Regular/Supplementary Examinations Jan./Feb. - 2015 ENGINEERING DRAWING Time: 3 hours (EEE) Question Paper Consists of Part-A and Part-B Answering the question in Part-A

Second Practice Test 1 Level 5-7

Mathematics Second Practice Test 1 Level 5-7 Calculator not allowed Please read this page, but do not open your booklet until your teacher tells you to start. Write your name and the name of your school

Downloaded from

Symmetry 1 1.A line segment is Symmetrical about its ---------- bisector (A) Perpendicular (B) Parallel (C) Line (D) Axis 2.How many lines of symmetry does a reactangle have? (A) Four (B) Three (C)

SAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046)

SAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70 Note: (i) Attempt all the questions. (ii) Use both sides of the drawing sheet, if necessary. (iii) All dimensions

SAMPLE QUESTION PAPER III ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70

SAMPLE QUESTION PAPER III ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70 Note: (i) Attempt all the questions. (ii) Use both sides of the drawing sheet, if necessary. (iii) All dimensions

Answer Key. Easy Peasy All-In-One-Homeschool

Answer Key Easy Peasy All-In-One-Homeschool 3 Odd Numbers A. Odd numbers cannot be paired or divided into equal groups. Count the dots on each dice and circle the pairs. Is the count Odd or Even? + My

Mathematics Paper 2. Stage minutes. Page Mark. Name.. Additional materials: Ruler Calculator Protractor READ THESE INSTRUCTIONS FIRST

1 55 minutes Mathematics Paper 2 Stage 7 Name.. Additional materials: Ruler Calculator Protractor READ THESE INSTRUCTIONS FIRST Answer all questions in the spaces provided on the question paper. You should

CCE Calendar for Session Delhi Region (Split-up Syllabus) Class VI- Mathematics TERM I

CCE Calendar for Session 2016-2017 Delhi Region (Split-up Syllabus) Class VI- Mathematics TERM I MONTHS CHAPTER/TOPIC SUB TOPICS TO BE COVERED NUMB ER OF PERIO DS SUGGESTED ACTIVITIES CH 1. Knowing Our

Technical Graphics Ordinary Level Section A (120 marks)

Coimisiún na Scrúduithe Stáit State Examinations Commission 2012. S60A Junior Certificate Examination, 2012 Technical Graphics Ordinary Level Section A (120 marks) Monday, 18 June Morning 9:30-12:00 Centre

University of Houston High School Mathematics Contest Geometry Exam Spring 2016

University of Houston High School Mathematics ontest Geometry Exam Spring 016 nswer the following. Note that diagrams may not be drawn to scale. 1. In the figure below, E, =, = 4 and E = 0. Find the length

I Write the Number Names 223-89 - 605-1000 - 812-437 - 893-910 - II 115-844 - Fill in the blanks 6 X 7 = 2 X 9 = 7 X 8 = 7 X 5 = 3 X10 = 6 X 7 = 5 X 5 = 3 X 6 = 6 X 3 = 7 X 7 = 3 X 9 = 5 X 8 = III Write

You need to be really accurate at this before trying the next task. Keep practicing until you can draw a perfect regular hexagon.

Starter 1: On plain paper practice constructing equilateral triangles using a ruler and a pair of compasses. Use a base of length 7cm. Measure all the sides and all the angles to check they are all the

The London Independent Girls Schools Consortium. Mathematics Specimen Paper

Name: Present School:.. The London Independent Girls Schools Consortium Mathematics Specimen Paper Instructions: Time allowed: 1 hour 15 minutes Only use a pencil and a rubber. Do all your rough working

4. Draw the development of the lateral surface of the part P of the cylinder whose front view is shown in figure 4. All dimensions are in cm.

Code No: Z0122 / R07 Set No. 1 I B.Tech - Regular Examinations, June 2009 ENGINEERING GRAPHICS ( Common to Civil Engineering, Mechanical Engineering, Chemical Engineering, Bio-Medical Engineering, Mechatronics,

Meet #5 March Intermediate Mathematics League of Eastern Massachusetts

Meet #5 March 2008 Intermediate Mathematics League of Eastern Massachusetts Meet #5 March 2008 Category 1 Mystery 1. In the diagram to the right, each nonoverlapping section of the large rectangle is

Answer Key. Easy Peasy All-In-One-Homeschool

Answer Key Easy Peasy All-In-One-Homeschool 3 Odd Numbers A. Odd numbers cannot be paired or divided into equal groups. Count the dots on each dice and circle the pairs. Is the count Odd or Even? + My

7048 CDT: DESIGN AND COMMUNICATION

www.onlineexamhelp.com www.onlineexamhelp.com UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 008 question paper 7048 CDT: DESIGN AND COMMUNICATION

1 ISOMETRIC PROJECTION SECTION I: INTRODUCTION TO ISOMETRIC PROJECTION

1 ISOMETRIC PROJECTION SECTION I: INTRODUCTION TO ISOMETRIC PROJECTION Orthographic projection shows drawings of an object in a two-dimensional format, with views given in plan, elevation and end elevation

1 P a g e

1 P a g e Dear readers, This Logical Reasoning Digest is docket of Questions which can be asked in upcoming BITSAT Exam 2018. 1. In each of the following questions, select a figure from amongst the four

Shape, space and measures 4

Shape, space and measures 4 contents There are three lessons in this unit, Shape, space and measures 4. S4.1 Rotation and rotation symmetry 3 S4.2 Reflection and line symmetry 6 S4.3 Problem solving 9

elements of design worksheet

elements of design worksheet Line Line: An element of art that is used to define shape, contours, and outlines, also to suggest mass and volume. It may be a continuous mark made on a surface with a pointed

Volume and Surface Area (F) Intervention Booklet

Volume and Surface Area (F) Intervention Booklet Cubes and Cuboids Things to remember: The volume of a cube or cuboid = base x depth x height. To calculate the surface area, work out the area of the surface!

Section 5. Graphic techniques for portfolio presentation

Graphics techniques 117 Section 5 Graphic techniques for portfolio presentation A general knowledge of some basic graphic techniques is needed by all Technology students in order that the presentation

Recruitments.guru. Cubes and Dices. Cubes and cuboid:

Cubes and Dices Cubes and cuboid: In a cube or a cuboid there are six surfaces, 8 corners and 12 edges in each. In a cube length, breadth and height are same while in cuboid these are different. In a cube

Reception Maths A booklet for parents

Reception Maths A booklet for parents Fun ideas to help your child with mathematics By the end of Reception, most children should be able to Say one, two, three, four to twenty. Count up to 10 objects.

Addition and Subtraction of Integers. Objective To add and subtract integers using counters (or buttons) of different colours.

Activity1 Addition and Subtraction of Integers Objective To add and subtract integers using counters (or buttons) of different colours. Material Required Counters coloured differently on both the faces,

Downloaded from

Symmetry 1.Can you draw a figure whose mirror image is identical to the figure itself? 2.Find out if the figure is symmetrical or not? 3.Count the number of lines of symmetry in the figure. 4.A line

Problem Set #4 Due 5/3 or 5/4 Pd

Geometry Name Problem Set #4 Due 5/3 or 5/4 Pd Directions: To receive full credit, show all required work. Questions may have multiple correct answers. Clearly indicate the answers chosen. For multiple

Chance and Probability

G Student Book Name Series G Contents Topic Chance and probability (pp. ) probability scale using samples to predict probability tree diagrams chance experiments using tables location, location apply lucky

You must have: Ruler graduated in centimetres and millimetres, pen, HB pencil, eraser. Tracing paper may be used.

Write your name here Surname Other names Pearson Edexcel International Primary Curriculum Centre Number Mathematics Year 6 Achievement Test Candidate Number Thursday 4 June 2015 Morning Time: 1 hour Paper

Name: Period: THE ELEMENTS OF ART

Name: Period: THE ELEMENTS OF ART Name: Period: An element of art that is used to define shape, contours, and outlines, also to suggest mass and volume. It may be a continuous mark made on a surface with

Chapter 5 SECTIONS OF SOLIDS 5.1 INTRODUCTION

Chapter 5 SECTIONS OF SOLIDS 5.1 INTRODUCTION We have studied about the orthographic projections in which a 3 dimensional object is detailed in 2-dimension. These objects are simple. In engineering most

learning about tangram shapes

Introduction A Tangram is an ancient puzzle, invented in China and consisting of a square divided into seven geometric shapes: Two large right triangles One medium right triangle Tangram Two small right

Triangles, Rectangles, Squares, and Circles

Triangles, Rectangles, Squares, and Circles Triangle sides Rectangle 4 sides Lesson 21 21 Square length a rectangle with 4 equal sides width Measures of a circle: Radius = 1 diameter Diameter = 2 radius

Honors Geometry Summer Math Packet

Honors Geometry Summer Math Packet Dear students, The problems in this packet will give you a chance to practice geometry-related skills from Grades 6 and 7. Do your best to complete each problem so that

6T Shape and Angles Homework - 2/3/18

6T Shape and Angles Homework - 2/3/18 Name... Q1. The grids in this question are centimetre square grids. (a) What is the area of this shaded rectangle?... cm 2 What is the area of this shaded triangle?...

Understand Plane Sections of Prisms and Pyramids

Lesson 25 Understand Plane Sections of Prisms and Pyramids Name: Prerequisite: How do you identify shapes according to their properties? Study the example showing how to identify shapes by using their

Figure Matrix - Non Verbal Reasoning questions

Figure Matrix - Non Verbal Reasoning questions In each of the following questions, find out which of the answer figures (1), (2), (3) and (4) completes the figure matrix? 1. Select a suitable figure from

Name Period No. Geometry Unit Review with Application Problems

Name Period No. Geometry Unit Review with Application Problems For problems 1-3, find the area of each figure. Show all steps. 1) 2) 4) Draw a parallelogram with an area of 50 sq. units in the 3) coordinate

Name: Date Completed: Basic Inventor Skills I

Name: Date Completed: Basic Inventor Skills I 1. Sketch, dimension and extrude a basic shape i. Select New tab from toolbar. ii. Select Standard.ipt from dialogue box by double clicking on the icon. iii.

Autodesk Inventor 2016 Creating Sketches

Autodesk Inventor 2016 Creating Sketches 2D Sketch Practice 1 1. Launch Autodesk Inventor 2016 2. Create a new Part file (.ipt) 3. Save File As a. Click on the save icon. b. Save you file onto your flash

Introduction to sketching. Wooden Box. Set. Name. Madras College, St Andrews

Introduction to sketching Wooden Box Name Set Madras College, St Andrews 16 1 This drawing unit aims to teach you the skills you need to make a range of sketches of craft models like the small wooden box

Exploring Concepts with Cubes. A resource book

Exploring Concepts with Cubes A resource book ACTIVITY 1 Gauss s method Gauss s method is a fast and efficient way of determining the sum of an arithmetic series. Let s illustrate the method using the

Middle School Geometry. Session 2

Middle School Geometry Session 2 Topic Activity Name Page Number Related SOL Spatial Square It 52 6.10, 6.13, Relationships 7.7, 8.11 Tangrams Soma Cubes Activity Sheets Square It Pick Up the Toothpicks

Surname... Candidate number... The Manchester Grammar School. 1 Hour. Do not open this booklet until told to do so Calculators may not be used

Surname... Candidate number... First name... Current school... The Manchester Grammar School Entrance Examination 2013 Arithmetic Paper 2 1 Hour Do not open this booklet until told to do so Calculators

use properties and relationships in geometry.

The learner will understand and 3 use properties and relationships in geometry. 3.01 Using three-dimensional figures: a) Identify, describe, and draw from various views (top, side, front, corner). A. Going

THE NORTH LONDON INDEPENDENT GIRLS SCHOOLS CONSORTIUM MATHEMATICS

THE NORTH LONDON INDEPENDENT GIRLS SCHOOLS CONSORTIUM Group 2 YEAR 7 ENTRANCE EXAMINATION MATHEMATICS Friday 8 January 2016 Time allowed: 1 hour 15 minutes First Name:... Surname:... Instructions: Please

ENGINEERING DRAWING. UNIT III - Part A

DEVELOPMENT OF SURFACES: ENGINEERING DRAWING UNIT III - Part A 1. What is meant by development of surfaces? 2. Development of surfaces of an object is also known as flat pattern of the object. (True/ False)

MATHEMATICS STANDARD THREE TERM - I. Text Book Team CHAIRPERSON C.PERIASAMY, Senior Lecturer, D.I.E.T., Namakkal REVIEWERS

MATHEMATICS STANDARD THREE TERM - I Text Book Team CHAIRPERSON C.PERIASAMY, Senior Lecturer, D.I.E.T., Namakkal 637001. REVIEWERS G.PALANI, K.MANGAIYERKARASI, Lecturer, Lecturer, D.I.E.T., VADALUR -607

1. Compare the length, weight and volume of two or more objects using direct comparison or a non-standard unit.

Students: 1. Students use direct comparison and non-standard units to describe the measurements of objects. 1. Compare the length, weight and volume of two or more objects using direct comparison or a

Problem of the Month: Between the Lines

Problem of the Month: Between the Lines Overview: In the Problem of the Month Between the Lines, students use polygons to solve problems involving area. The mathematical topics that underlie this POM are

SPIRE MATHS Stimulating, Practical, Interesting, Relevant, Enjoyable Maths For All

Imaginings in shape and space TYPE: Main OBJECTIVE(S): DESCRIPTION: OVERVIEW: EQUIPMENT: Begin to identify and use angle, side and symmetry properties of triangles and quadrilaterals; solve geometrical

1. Choose two shapes. Combine the shapes to make a new shape. Make sure that the two shapes share a side. Draw your new shape.

Name Unit 7 Shape Up!. Choose two shapes. Combine the shapes to make a new shape. Make sure that the two shapes share a side. Draw your new shape. 2. Describe each shape you used. Explain how your new

Paper 1. Calculator not allowed. Mathematics tests KEY STAGE LEVEL. First name. Middle name. Last name. Date of birth Day Month Year.

Ma KEY STAGE 2 Mathematics tests LEVEL 6 Paper 1 Calculator not allowed First name Middle name 2012 Last name Date of birth Day Month Year School name DfE number 02 Cleo Jon Runa Instructions You may not

SOL Review April Class work-nallari Math 8 Measurement & Geometry SOL -CAT Questions 13 SOL 8.6a, 8.7a-b, 8.8a-b,8.9,8.10a-b&8.

SOL Review April 18-22 Class work-nallari Math 8 Measurement & Geometry SOL -CAT Questions 13 SOL 8.6a, 8.7a-b, 8.8a-b,8.9,8.10a-b&8.11 Nallari Math 8 1 SOL8.6a 1.Lines l, m, and n intersect at the same

Paper 1. Mathematics test. Calculator not allowed KEY STAGE TIERS. First name. Last name. School

Ma KEY STAGE 3 TIERS 5 7 2006 Mathematics test Paper 1 Calculator not allowed Please read this page, but do not open your booklet until your teacher tells you to start. Write your name and the name of

Orthographic Projection 1

Orthographic Projection 1 What Is Orthographic Projection? Basically it is a way a representing a 3D object on a piece of paper. This means we make the object becomes 2D. The difference between Orthographic

Maths. Using numbers to carry out calculations and solve problems.

Maths Using numbers to carry out calculations and solve problems. We want children to be confident manipulating numbers based on their visualisation of quantities. Which group has 30? Children often muddled

Fun Challenges Problem Solving Reasoning Deductive Thinking Convergent/Divergent Thinking Mind-Bending Challenges Critical Thinking

Fun Challenges Problem Solving Reasoning Deductive Thinking Convergent/Divergent Thinking Mind-ending Challenges Critical Thinking Magic Shapes #1 Magic Shapes #1 Directions: Write the numbers 1 through

Operations and Algebraic Thinking: Fluency within 5

Unit 13 Operations and Algebraic Thinking: Fluency within 5 Introduction In this unit, students will develop fluency in addition and subtraction within 5. By this point, they have learned several methods

VAISHALI EDUCATION POINT (QUALITY EDUCATION PROVIDER)

VAISHALI EDUCATION POINT (QUALITY EDUCATION PROVIDER) BY Prof. RAHUL MISHRA SURFACE AREA & VOLUMES Class :- X QNo. General Instructions Questions M:9999907099,9818932244 Subject :- Maths 1 A rectanguler