Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 1
|
|
|
- Mavis Hopkins
- 5 years ago
- Views:
Transcription
1 Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 1
2 Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 2
3 Download the blueprints for your yacht: Click here to download your yacht blueprints Open SolidWorks Go to: Start > Programs > SolidWorks Create a new part Open a new part with model units set to millimeters. Go to: File > New > Part Select the three planes in the feature tree and make them visible by clicking on the glasses. Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 3
4 Create a new sketch on the Front Plane Select the Front Plane in the Feature Manager Click on the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map and go to: Blueprints > Select Blueprint_Front.PNG Click: Open Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 4
5 Change the dimensions and the position of the blueprint as shown in the picture (The scale calculations are already done for you) Select Full image in the Transparency tab and change the transparency into 0,40 Click OK Click on the Front Plane and drag at the corner balls to increase the Plane size as shown in the picture Close the sketch Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 5
6 Change the name of Sketch1 Click on Sketch1 in the feature tree twice (slow, no double click) Change the name into: BLUEPRINT_FRONTVIEW Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 6
7 Create a new sketch on the Right Plane Select the Right Plane in the Feature Manager Click on the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select Blueprint_Side.PNG Click: Open Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 7
8 Change the dimensions and the positions of the blueprint as shown in the picture Select Full image in the Transparency tab and change the transparency into 0,40 Click OK Click on the Right Plane and drag at the corner balls to increase the Plane size as shown in the picture Close the sketch Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 8
9 Change the name of Sketch2 Click on Sketch2 in the feature tree twice (slow, no double click) Change the name into: BLUEPRINT_SIDEVIEW Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 9
10 Create a new sketch on the Top Plane Select the Top Plane in the Feature Manager Click on the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select Blueprint_Bottom.PNG Click: Open Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 10
11 Change the dimensions and the positions of the blueprint as shown in the picture Select Full image in the Transparency tab and change the transparency into 0,40 Click OK Close the sketch Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 11
12 Change the name of Sketch3 Click on Sketch3 in the feature tree twice (slow, no double click) Change the name into: BLUEPRINT_BOTTOMVIEW Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 12
13 Change the name of the Top Plane Click on the Top Plane in the feature tree twice (slow, no double click) Change the name into: Bottom Plane Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 13
14 Create a new plane Go to: Insert > Reference Geometry > Plane or click on the New Plane icon First Reference : Select the Front Plane Change the Offset Distance into: mm Click on the Flip option to flip the offset direction of the Plane Click OK Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 14
15 Change the name of Plane 1 Click on Plane1 in the feature tree twice (slow, no double click) Change the name into: Back Plane Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 15
16 Create a new sketch on the new Back Plane Select the Back Plane in the Feature Manager Click on the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select Blueprint_Back.PNG Click: Open Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 16
17 Change the dimensions and the positions of the blueprint as shown in the picture Select Full image in the Transparency tab and change the transparency into 0,40 Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 17
18 Select Flip Horizontally to make sure that the ship horns are at the same side as in BLUEPRINT FRONTVIEW Click OK Close the sketch Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 18
19 Change the name of Sketch4 Click on Sketch4 in the feature tree twice (slow, no double click) Change the name into: BLUEPRINT_BACKVIEW Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 19
20 Create a New Plane Go to: Insert > Reference Geometry > Plane or click on the New Plane icon First Reference : Select the Bottom Plane Change the Offset Distance into: mm Click OK Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 20
21 Change the name of Plane2 Click on Plane2 in the feature tree twice (slow, no double click) Change the name into: Top Plane Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 21
22 Create a new sketch on the new Top Plane Select the Top Plane in the Feature Manager Click on the 2D Sketch icon to make a new sketch Go to: Tools > Sketch Tools > Sketch Picture Browse to the YachtTutorial map: Blueprints > Select Blueprint_Top.PNG Click: Open Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 22
23 Change the dimensions and the positions of the blueprint as shown in the picture Select Full image in the Transparency tab and change the transparency into 0,40 Click OK Close the sketch Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 23
24 Change the name of Sketch5 Click on Sketch5 in the feature tree twice (slow, no double click) Change the name into: BLUEPRINT_TOPVIEW Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 24
25 Change the name of the Right Plane Click on Right Plane in the feature tree twice (slow, no double click) Change the name into: Mid Plane Change the order of the Planes and Sketches for a better overview Select the Back Plane and drag it to above as shown in the picture Select the Top Plane and drag it to above as shown in the picture Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 25
26 Save your file Click on the Save icon Give your file the following name: Blueprint_Setup Congratulations, you have just installed the Blueprints! Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 26
27 Note: You might be wondering how to model a new yacht design without having blueprints like we used in this tutorial. In the SolidWorks Yacht tutorial we used some "perfect" line drawing as blueprints because I didn't want to make things too complicated for the tutorial. But a blueprint can also be a conceptual hand sketch. I always recommend you to make hand sketches of your design before you start with 3D modeling. You can import your hand sketches in SolidWorks the same way as the blueprints. Another tip is to use pictures of a similar product as blueprints. For instance: in case you want to design a new sports car, you can use pictures/blueprints of an existing sports car as a guideline for the proportions of the new design. Here you see one of my photorealistic renderings of the yacht that we will model in the SolidWorks Yacht tutorial. Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 27
28 In the next tutorial you will learn how to model Part I of the Hull in SolidWorks. Copyright by J.W. Zuyderduyn - How To Model a Yacht in SolidWorks? Page 28
Copyright by J.W. Zuyderduyn Page 1
Copyright by J.W. Zuyderduyn www.learnsolidworks.com Page 1 A step by step SolidWorks Tutorial Copyright by J.W. Zuyderduyn www.learnsolidworks.com Page 2 About the Author Hi, my name is Jan-Willem Zuyderduyn
SolidWorks Navigation
SolidWorks Basics SolidWorks Navigation Command Bar Feature Tree Model Window Simple Box Select the Front plane Create a new sketch Create a Center Rectangle from the origin Smart Dimension the length
Converting a solid to a sheet metal part tutorial
Converting a solid to a sheet metal part tutorial Introduction Sometimes it is easier to start with a solid and convert it to create a sheet metal part. This tutorial will guide you through the process
EXERCISE ONE: BEACH BUGGY.
EXERCISE ONE: BEACH BUGGY. Prerequisite knowledge Students should have completed Exercises from the file: Introduction to Assemblies Concept Mates Focus of lesson Commands Used This lesson will focus on
Starting a 3D Modeling Part File
1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY CAPSULE PROGRAM Funded by NSF grant #0833636 Tutorial 02 3D Part Modeling SolidWorks 2010 Copyright 2010 Prof. Zeid 3D Part Modeling
SolidWorks Tutorial 1. Axis
SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to
AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
g. Click once on the left vertical line of the rectangle.
This drawing will require you to a model of a truck as a Solidworks Part. Please be sure to read the directions carefully before constructing the truck in Solidworks. Before submitting you will be required
Lesson 10: Loft Features
10 Goals of This Lesson Your students will be able to create the following part: profiles chisel This lesson plan corresponds to the Loft Features chapter of SolidWorks Getting Started. SolidWorks Student
SolidWorks Design & Technology
SolidWorks Design & Technology Training Course at PHSG Ex 5. Lego man Working with part files 8mm At first glance the Lego man looks complicated but I hope you will see that if you approach a project one
On completion of this exercise you will have:
Prerequisite Knowledge To complete this exercise you will need; to be familiar with the SolidWorks interface and the key commands. basic file management skills the ability to rotate views and select faces
Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008
1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
SDC. SolidWorks Tutorial 2001Plus. A Competency Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.
2001Plus A Competency Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com Project 2 Below are the desired
Introduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1
AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an
Feature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating
SolidWize. Online SolidWorks Training. Lofts: Tea Pot
SolidWize Online SolidWorks Training Lofts: Tea Pot Step 1: Creating the Body Using inches as the unit, create the following sketch on the top plane. We will now add a plane above the top plane so that
Modeling an Airframe Tutorial
EAA SOLIDWORKS University p 1/11 Difficulty: Intermediate Time: 1 hour As an Intermediate Tutorial, it is assumed that you have completed the Quick Start Tutorial and know how to sketch in 2D and 3D. If
Inventor Activity 5: Lofted Vase
Inventor Activity 5: Lofted Vase In this tutorial, you will use a few new commands to create a free form Lofted object. Sometimes you want to create an object that is not made up of square, flat, or perfectly
Toothbrush Holder Project 2D Machining
Toothbrush Holder Project 2D Machining Prerequisite Toothbrush Holder drawn and saved as a DXF file in SolidWorks Focus of the Lesson On completion of this exercise you will have: Used the Techsoft 2D
SolidWize. Online SolidWorks Training. Simple Sweep: Head Scratcher
SolidWize Online SolidWorks Training Simple Sweep: Head Scratcher Step 1: Creating the Handle: Sketch Using Inches as the unit create a sketch on the Front plane. Start with the sketch shown below: Create
Clock Exercise (Inserting Planes)
Clock Exercise (Inserting Planes) Prerequisite Knowledge To complete this exercise you will need to be familiar with Sketching, Applying relations, Extrude Boss/ Base, Extrude cut, Applying Textures, Renaming
Solidworks tutorial. 3d sketch project. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
Solidworks tutorial 3d sketch project A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m we will create this frame during the tutorial : In this tutorial
Lesson 6: Drawing Basics
6 Lesson 6: Drawing Basics Goals of This Lesson Understand basic drawing concepts. Create detailed drawings of parts and assemblies:. Before Beginning This Lesson Create Tutor1 and Tutor2 parts and the
Cube in a cube Fusion 360 tutorial
Cube in a cube Fusion 360 tutorial n Before using these instructions, it is helpful to watch this video screencast of the CAD drawing actually being done in the software. Click to link to the video tutorial.
Anchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1 Part Tutorial Exercise 4: Step-Pyramid-1 [text version] In this Exercise, We will set System Parameters first. Then, in sketch mode, outline the Step
SolidWorks 103: Barge Design Challenge
SolidWorks 103: Barge Design Challenge Note: This tutorial was created using SolidWorks 2009. If you are using another version of SolidWorks, you may notice some variation in display states and configuration.
Chair. Bottom Rail. on the Command Manager. on the Weldments toolbar.
Chapter 2 Chair Bottom Rail A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. Step 2. Right click Sketch on the Command Manager toolbar and select Weldments, Fig. 1. Step 3. Click
Chapter 5 Sectional Views
Chapter 5 Sectional Views There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved
Welcome to SPDL/ PRL s Solid Edge Tutorial.
Smart Product Design Product Realization Lab Solid Edge Assembly Tutorial Welcome to SPDL/ PRL s Solid Edge Tutorial. This tutorial is designed to familiarize you with the interface of Solid Edge Assembly
REVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
The Revolve Feature and Assembly Modeling
The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling
Introduction to Sheet Metal Features SolidWorks 2009
SolidWorks 2009 Table of Contents Introduction to Sheet Metal Features Base Flange Method Magazine File.. 3 Envelopment & Development of Surfaces.. 14 Development of Transition Pieces.. 23 Conversion to
Stone Creek Textiles. Layers! part 1
Stone Creek Textiles Layers! part 1 This tutorial is all about working with layers. This, to my mind, is one of the two critical areas to master in order to work creatively with Photoshop Elements. So,
Shaft Hanger - SolidWorks
ME-430 INTRODUCTION TO COMPUTER AIDED DESIGN Shaft Hanger - SolidWorks BY: DR. HERLI SURJANHATA ASSIGNMENT Submit TWO isometric views of the Shaft Hanger with your report, 1. Shaded view of the trimetric
Introduction to 3D CAD with SolidWorks. Jianan Li
Introduction to 3D CAD with SolidWorks Jianan Li Create a New Part The first time you launch SolidWorks, it asks you to set the default units and dimension standard. Make sure you have IPS and ANSI selected,
Tips & Techniques - Materials
Tips & Techniques - Materials Materials: How to Create a Spherical Map With Corrections For Distortion Download: Project Works with: GO, SE, XL Requires: Version Special Notes: Special Thanks to Chris
Engineering & Computer Graphics Workbook Using SOLIDWORKS
Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
Foreword. If you have any questions about these tutorials, drop your mail to
Foreword The main objective of these tutorials is to give you a kick start using Solidworks. The approach to write this tutorial is based on what is the most important knowledge you should know and what
Introduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
1. Creating geometry based on sketches 2. Using sketch lines as reference 3. Using sketches to drive changes in geometry
4.1: Modeling 3D Modeling is a key process of getting your ideas from a concept to a read- for- manufacture state, making it core foundation of the product development process. In Fusion 360, there are
Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)
Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model
Working With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
10/14/2010. Chevy Malibu. Vehicle Design with Solidworks. Start SolidWorks Create a New SolidWorks Document. Miles, Rowardo B
Chevy Malibu Vehicle Design with Solidworks Start SolidWorks Create a New SolidWorks Document Miles, Rowardo B 1 Click: Part and then OK Now you are ready to make a Part. 2 Right Toolbar: Document Properties:
Principles and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation
Creo Extrude Tutorial 3: Hole, Fillets and Rounds
Creo Extrude Tutorial 3: Hole, Fillets and Rounds By: Matthew Jourden Brighton High School 1. Open Creo Parametric 2. File > Open > extrudetutorial (From Creo Extrude Tutorial 1) NOTE: Minimum of 2 other
Creo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
Photoshop Activity #05: Creating Composite Pictures /Collages
Photoshop Activity #05: Creating Composite Pictures /Collages Overview You can create composite pictures for an unlimited number of purposes and subjects! Literature units, science, history, virtually
SolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard
Bottom Rail. Chapter 2. Chair. A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. B. 3D Sketch.
Chapter 2 Chair Bottom Rail A. Weldments Toolbar. Step 1. Click File Menu > New, click Part and OK. Step 2. Right click Sketch on the Command Manager toolbar and select Weldments, Fig. 1. Step 3. Click
Engineering & Computer Graphics Workbook Using SolidWorks 2014
Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
Veerapandian.K Mechanical Engg Vedharanyam A manual to mechanical designers How Solid works Works?
Compiled by Veerapandian.K Mechanical Engg Vedharanyam-614 810 A manual to mechanical designers How Solid works Works? Solid works Overview Solid works main idea is user to create drawing directly in 3D
Quilt-Pro 6. Creating a Panel Quilt
QP6 Lessons posted Page 1 Creating a Panel Quilt Quilt-Pro 6 I have seen some really beautiful fabric panels that would look absolutely gorgeous in a quilt. Panel quilts can be made quickly or can be as
Solidworks Tutorial Pencil
The following instructions will be used to help you create a Pencil using Solidworks. These instructions are ordered to make the process as simple as possible. Deviating from the order, or not following
Drawing with precision
Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial
Introduction to 3D Printing. Activity 1: Design a keychain using computer-aided design software
Introduction to 3D Printing Activity 1: Design a keychain using computer-aided design software 1 In this activity we ll design a keychain name tag and learn the fundamentals of computer-aided design, the
Assembly Receiver/Hitch/Ball/Pin to use for CAD LAB 5A and 5B:
MECH 130 CAD LAB 5 SPRING 2017 due Friday, April 21, 2016 at 4:30 PM All of LAB 5 s hardcopies will be working drawing layouts. Do not print out from the part file. We will be using the ME130DRAW drawing
Solidworks tutorial. drawing. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
Solidworks tutorial drawing A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m The manufacturing techniques had a vast development during the past decades.
From the above fig. After sketching the path and profile select the sweep command First select the profile from property manager tree And then select
Chapter 5 In sweep command there is a) Two sketch profiles b) Two path c) One sketch profile and one path The sweep profile is used to create threads springs circular things and difficult geometry. For
Managing images with NewZapp
Managing images with NewZapp This guide is for anyone using the NewZapp Fixed editor as opposed to the Drag and Drop editor. The Image Manager is where images are uploaded and stored in your NewZapp account
Getting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
SolidWorks. and Vacuum Forming. and Part Finishing Oh my!
SolidWorks and Vacuum Forming and Part Finishing Oh my! Blade boxes! Alejandro Miki??? Daymé Olivia Plays Sketch Model like!design Critique! \ Loo ks like! \ Sketch Model Feedback 18-20 reviewers per team
Engineering Design. with SolidWorks A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects Engineering Design with SolidWorks 2010 A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling Introductory Level
for Solidworks TRAINING GUIDE LESSON-9-CAD
for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working
Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge
Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored
SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
Name: Date Completed: Basic Inventor Skills I
Name: Date Completed: Basic Inventor Skills I 1. Sketch, dimension and extrude a basic shape i. Select New tab from toolbar. ii. Select Standard.ipt from dialogue box by double clicking on the icon. iii.
Inventor-Parts-Tutorial By: Dor Ashur
Inventor-Parts-Tutorial By: Dor Ashur For Assignment: http://www.maelabs.ucsd.edu/mae3/assignments/cad/inventor_parts.pdf Open Autodesk Inventor: Start-> All Programs -> Autodesk -> Autodesk Inventor 2010
SolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
SolidWorks Reference Geometry
SolidWorks Reference Geometry IDeATe Laser Micro Part 2 Dave Touretzky and Susan Finger 1. Symmetry and Reference Geometry Today, you ll make this part bear-like face and then cut it on the laser cutter:
Materials Tutorial. Chapter 6: Setting Materials Defaults
Setting Materials Defaults Chapter 6: Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material
Hydro Hull. Chapter 21. Boat. A. Save as "HYDRO". Step 1. Open your HULL MID PLANE file (Chapter 2).
Chapter 21 Boat Hydro Hull A. Save as "HYDRO". Step 1. Open your HULL MID PLANE file (Chapter 2). Step 2. Click File Menu > Save As. Step 3. Key-in HYDRO for the filename and press ENTER. B. Delete Loft1,
Materials Tutorial. Chapter 6: Setting Materials Defaults
Setting Materials Defaults Chapter 6: Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material
Engineering Innovation Center Fabrication Shop Basic CAD Training
Engineering Innovation Center Fabrication Shop Basic CAD Training Introduction The Engineering Innovation Center Fabrication Shop was established for support of undergraduate student course work. Every
Using Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
Engineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Control + Click HERE to view enlarged IMAGE and Construction Strategy he following set of
Purlin Roof. Create a New Folder in your chosen location called Purlin Roof. The nine parts that make up the project will be saved here.
Purlin Roof Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Add Relations, Dimensioning), Inserting Planes, Extrude,
Getting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
Advance Dimensioning and Base Feature Options
Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch
Vehicle Dynamics and Design Creating a Chevy Malibu car in SolidWorks STEP 2: Go to top of page to Tools, then scroll down to Options.
STEP 1: Open up SolidWorks 2008. (a) Choose a new part to open. (b) Click OK. Vehicle Dynamics and Design Creating a Chevy Malibu car in SolidWorks 2008 STEP 2: Go to top of page to Tools, then scroll
EG1003 Help and How To s: Revit Tutorial
EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,
Creo Extrude Tutorial 2: Cutting and Adding Material
Creo Extrude Tutorial 2: Cutting and Adding Material 1. Open Creo Parametric 2. File > Open > extrudeturial (From Creo Extrude Tutorial 1) 3. Cutting Material a. Click Extrude Icon > Select the following
Evaluation Chapter by CADArtifex
The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching
Materials Tutorial. Setting Materials Defaults
Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material quantities will also be calculated in
Creo Parametric Primer
Creo Parametric Primer Creo Parametric Primer Education Editions 2 C2-SE-L1-004-1.0 Written by Tim Brotherhood and Adam Haas Conditions of use Acknowledgements Feedback tbrotherhood@ptc.com Product code
Beginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS
Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling
Introduction to Layers
Introduction to Layers By Anna Castano A layer is an image or text that is piled on top of another. There are many things you can do with layer and it is easy to understand how it works. Through the introduction
Certified SOLIDWORKS Professional Advanced Preparation Materials
Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016
SOLIDWORKS TO LASER CUTTER DOCUMENT CONVERSION
UNIVERSITY OF CALIFORNIA, SANTA CRUZ BOARD OF STUDIES IN COMPUTER ENGINEERING CMPE118(218)/L: INTRODUCTION TO MECHATRONICS SOLIDWORKS TO LASER CUTTER DOCUMENT CONVERSION PURPOSE: This document outlines
Alibre Design Exercise Manual Introduction to Sheet Metal Design
Alibre Design Exercise Manual Introduction to Sheet Metal Design Copyrights Information in this document is subject to change without notice. The software described in this documents is furnished under
R2-D2 SolidWorks Model
R2-D2 SolidWorks Model Mike Haftl E-Design 100 Section 7 August 5, 2016 Haftl 1 Rendered Images Figure 1: Front view of R2-D2 model made in solid works Figure 2: Isometric Left view of R2-D2 model made
PTC Technical Specialists E-Newsletter Date: April 1, 2006
PTC Technical Specialists E-Newsletter Date: April 1, 2006 PTC Product Focus: A) What s New in Detail Drawings for Wildfire 3.0 Tips of the Month: B) Windchill Supplier Management Solution A) Tricks with
SolidWorks Tutorial 2 PICTURE HOLDER
SolidWorks Tutorial 2 PICTURE HOLDER Preparatory Vocational Training and Advanced Vocational Training To be used with SolidWorks Educational Release 2008-2009 1995-2009, Dassault Systèmes SolidWorks Corp.
Ball Valve Assembly. On completion of the assembly, we will create the exploded view as shown on the right.
Ball Valve Assembly Supplied are the main components of a ball valve. In this exercise you will assemble the valve as shown below Left. (N.B. Socket head cap screws are not supplied these will be created