COURSE OUTLINE. School of Engineering Technology and Applied Science. Applied Biological and Environmental Science (ABES)
|
|
- Rosalind Owens
- 5 years ago
- Views:
Transcription
1 COURSE OUTLINE SCHOOL: School of Engineering Technology and Applied Science DEPARTMENT: Applied Biological and Environmental Science (ABES) PROGRAM: Architectural Technology COURSE TITLE: Architectural Graphics COURSE CODE: ARGR-224 TOTAL COURSE HOURS: 30 PRE-REQUISITES/CO-REQUISITES: None COURSE ELIGIBILITY FOR PRIOR LEARNING ASSESSMENT AND RECOGNITION (PLAR): Yes ORIGINATED BY: Annette Richling and Ted Rosen (December, 2007) REVISED BY: DATE: APPROVED BY: Chairperson/Dean Semester: (Winter 2008) Students should keep all course outlines for each course taken at Centennial College. These may be used to apply for transfer of credit to other educational institutions. A fee may be charged for additional or replacement copies. 1/30/2008 THIS COURSE ADHERES TO ALL COLLEGE POLICIES (See College Calendar) Page 1
2 COURSE DESCRIPTION: This is the first of 2 courses in which students create architectural illustrations, both hand drawn and computerized. Students will prepare illustrations based on floor plans and detailed CAD drawings. Emphasis will be placed upon drawing skills and technique, in addition to, basic 3D computer modeling. Students will develop skill in using 3D computer techniques, as well as, hand drawn visualizations to present their designs and concepts. COURSE LEARNING OUTCOMES: - Prepare freehand sketches and pictorial field drawings to develop ideas, concepts and spatial relationships for production of measured drawings. - Prepare simple presentation drawings. - Read and interpret working drawings into sketches, illustrations and models. - Prepare orthographic, oblique, line and perspective drawings. - Apply art media techniques to presentation work. - Create basic two and three-dimensional presentations using various illustrational techniques and art media. - Create simple perspective drawings of an architectural structure for presentation complete with basic rendering. - Create a basic 3 dimensional model of an architectural structure. - Produce drawings using various types of media and techniques. - Prepare full presentations complete with illustrations and 3 dimensional computerized models. ESSENTIAL EMPLOYABILITY SKILLS (EES) This course supports the students ability to: Communicate clearly, concisely, and correctly in the written, spoken, and visual form that fulfills the purpose and meets the needs of the audience. Respond to written, spoken, or visual messages in a manner that ensures effective communication. Execute mathematical operations accurately. Apply a systematic approach to solve problems. Locate, select, organize, and document information using appropriate technology and information systems. Analyze, evaluate, and apply relevant information from a variety of sources. Show respect for the diverse opinions, values, belief systems, and contributions of others. Interact with others in groups or teams in ways that contribute to effective working relationships and the achievement of goals. Manage the use of time and other resources to complete projects. Take responsibility for one s own actions, decisions, and consequences. PRIOR LEARNING ASSESSMENT & RECOGNITION PROCESS (ES): This course is eligible for PLAR through the Registrar and SETAS offices. Assessment of portfolio and/or testing may be discussed with faculty. EVALUATION & GRADING SYSTEM Assignment 1 10% Assignment 2 10% Midterm Project 20% Sketchbook 10% Final Project 30% Final Test 20% 1/30/2008 THIS COURSE ADHERES TO ALL COLLEGE POLICIES (See College Calendar) Page 2
3 STUDENT ACCOMMODATION: All students have the right to study in an environment that is free from discrimination and/or harassment. It is College policy to provide accommodation based on grounds defined in the Ontario Human Rights Code. Accommodation may include changes or modifications to standard practices. Students with disabilities who require academic accommodations must register with the Centre for Student with Disabilities. Please see the Centre for Students with Disabilities for details. Students requiring accommodation based on human rights grounds should talk with their professors as early as possible. Details are available on the Centennial College website ( ) If students are unable to write an examination due to a medical problem or unforeseen family problems, they should immediately contact their professor or program Chair for advice. In exceptional and well-documented circumstances (e.g. unexpected family problems, serious illness, or death of a close family member), students should be able to write a make-up examination to replace an examination missed. TEXT AND OTHER INSTRUCTIONAL/LEARNING MATERIALS: Creating and Models Autodesk Official Training Courseware Published by: Autodesk ISBN: Other reference books: Design Drawing Author: Francis D.K. Ching w/ Steven P. Juroszek ISBN: USE OF DICTIONARIES Only paper bound English translation dictionaries will be permitted during tests and exams. 1/30/2008 THIS COURSE ADHERES TO ALL COLLEGE POLICIES (See College Calendar) Page 3
4 POLICY STATEMENTS College Policies The following statements are selected from Centennial College policies approved by the Board of Governors. Student Responsibilities Students are expected to know the contents of the course outline and to discuss with the professor any areas where clarification is required. Students should keep all course outlines for each course taken at Centennial College. These may be used to apply for transfer of credit to other educational institutions. A fee may be charged for additional or replacement copies. Other Policies Students should familiarize themselves with all College Policies that cover students rights, responsibilities, and the Academic Appeal process. For further information, consult the Academic Matters Section in the full-time and continuing education calendars. The Academic Appeal Application form is available from any Enrolment Services (Registrar) Office. Proof of Student Status Students are obliged to produce official photo identification at any time during the semester when requested to do so by any professor. (The official piece is the Centennial Student Card.) Continuing Education students do not have Centennial Student Cards, and so they may use other forms of photo identification, such as a driver s license, health card, or other government-issued photo identification. Final Examinations When writing a test or examination, students must put their official photo-id cards in full view, for review by the invigilator. Students who do not have official photo-id will be permitted to write the examination with a substitute photo-id, but they will be required to produce photo-id at the program or department office within 24 hours or the next business day following the examination, or else the examination results will be void. Faculty Consultation Professors are available to see students outside of class time. Students can contact professors via voice mail, , or through their program or department office. Information regarding how to contact teachers will be provided at the beginning of the course and is also available in the program or department office. Human Rights Statement It is the policy of the College that all programs will strive for a learning, teaching, and working environment that promotes inclusion, understanding and respect for all students and employees, consistent with the Ontario Human Rights Code and the Centennial College's Statement of Diversity. 1/30/2008 THIS COURSE ADHERES TO ALL COLLEGE POLICIES (See College Calendar) Page 4
5 WEEK TOPIC/CONTENT 1 Class Introduction - Introduction to drawing 2D architectural illustrations. Explanation and demonstration of various techniques, including line drawing, point of perspective and oblique drawing. READINGS Architectural Illustration booklet pages 1-21 LEARNING OUTCOMES Students will demonstrate various techniques in drawing architectural illustrations. INSTRUCTIONAL STRATEGIES USED A variety of architectural drawings and examples will be presented through a computer slideshow delivery, with explanations and insight of their styles and procedures. COURSE EVALUATIONS (TESTS & ASSIGNMENTS USED) Sketchbook Assignment given. Students are to sketch 2 architectural type drawings a week (24 total) in their sketch books. This exercise will give the students experience in hand drawings, while continuously improving their skills throughout the entire semester (10%) 2 Continuation of 2D architectural drawing. From floor plan or elevation to illustration. Various procedures in the creation of an architectural drawing. 3 Introduction to 3D AutoCAD modeling. 4 AutoCAD 3D User Coordinate System (UCS) and Booleans. 5 3D Solid Editing, including extrude, press pull, revolve and sweep along with 2D profiles and regions. Architectural Illustration booklet pages 1-21 pages 2-26 pages and pages Students will demonstrate various techniques in drawing architectural illustrations. Knowledge of the 3D AutoCAD interface and basic primitive solid creation. Understanding of the UCS coordinate system, which is essential for the navigation and creation of solid models. Students will demonstrate how to create more complex 3D models using techniques in editing and 2D profiling. Various exercises in which students will use the drawing techniques discussed in order to practice their skills. Practice drawings 1A-1E. Practice drawings 2A-2E. Practice drawings 3A-3I. Mid term project given. Drawn floor plan with 2 separate drawn illustrational views, using 2 alternate techniques (20%) Assignment 1 given. Basic 3D model (10%) 1/30/2008 THIS COURSE ADHERES TO ALL COLLEGE POLICIES (See College Calendar) Page 5
6 WEEK TOPIC/CONTENT 6 3D Solid Editing continued. Includes slice, section, shell, fillet and chamfer. 7 Mid Term Class Presentations of midterm project. Recap Class D Intersect Modeling and the basic 3D modify commands such as 3D move, rotate, align, array and mirror in addition to grip editing. READINGS Chapter 2 pages pages 94, Chapter 2 pages D Face editing. Chapter 2 pages D AutoCAD layouts for plotting and presentations using solview, soldraw, solprof and live sections. 11 Assembly Modeling. From Floor plan to 3D model, insertion of doors and windows. Chapter 3 pages LEARNING OUTCOMES Students will continue to learn and create complex 3D models, using a variety of 3D solid editing techniques. Through class presentations, students will view a variety of drawings that will help them discover other methods and techniques in creating their visualizations. Understanding of the various 3D modifying tools that will assist students further in the creation of their solid models. Students will demonstrate how to modify their 3D models with the use of the 3D face editor, an essential tool for the creation of their 3D models. Allows students to edit their models in a way that may not be edited otherwise. Students will learn how to present their 3D models using AutoCAD s 3D plotting features. Useful for the creation of elevations, 3D sections, profiles, as well as, an understanding of the basic techniques for printing their 3D models for presentation purposes. Understanding and demonstration of how an architectural model is assembled in 3D. INSTRUCTIONAL STRATEGIES USED Practice drawings 4A-4E. Practice drawings 5A-5C. COURSE EVALUATIONS (TESTS & ASSIGNMENTS USED) Assignment 1 due. Evaluation 10%. Mid term project due. Evaluation 20%. Assignment 2 given. Basic 3D model (10%) Final Project given - Basic 3D Architectural model with 5 presentational views (30%) Assignment 2 due. Evaluation 10%. 1/30/2008 THIS COURSE ADHERES TO ALL COLLEGE POLICIES (See College Calendar) Page 6
7 WEEK 12 TOPIC/CONTENT Assembly Modeling. Construction of roof and various objects. READINGS LEARNING OUTCOMES Understanding and demonstration of how an architectural model is assembled in 3D. 13 Assembly Modeling and recap. Students will finish and fine tune the construction of an architectural 3D model. 14 Class Presentations of final project. Through class presentations, students will view a variety of drawings that will help them discover other methods and techniques in creating their visualizations. INSTRUCTIONAL STRATEGIES USED COURSE EVALUATIONS (TESTS & ASSIGNMENTS USED) Final Project due - Evaluation 30%. Sketchbooks due - Evaluation 10%. 15 Final Exam. Final Exam - Evaluation 20%. 1/30/2008 THIS COURSE ADHERES TO ALL COLLEGE POLICIES (See College Calendar) Page 7
COURSE OUTLINE. School of Engineering Technology and Applied Science
COURSE OUTLINE SCHOOL: School of Engineering Technology and Applied Science DEPARTMENT: Information and Communication Engineering Technology (ICET) PROGRAM: Electronics Engineering Technician & Technology
More informationCOURSE OUTLINE. School of Engineering Technology & Applied Science. Advanced Manufacturing & Automation Technology (AMAT)
COURSE OUTLINE SCHOOL: DEPARTMENT: PROGRAM: COURSE TITLE: COURSE CODE: School of Engineering Technology & Applied Science Advanced Manufacturing & Automation Technology (AMAT) Mechanical Engineering Technology
More informationCOURSE OUTLINE. School of Engineering Technology & Applied Science. Advanced Manufacturing & Automation Technology (AMAT)
COURSE OUTLINE SCHOOL: DEPARTMENT: PROGRAM: COURSE TITLE: COURSE CODE: School of Engineering Technology & Applied Science Advanced Manufacturing & Automation Technology (AMAT) Automation & Robotics Technology/Technician
More informationNASHVILLE STATE TECHNICAL COMMUNITY COLLEGE COURSE INFORMATION. AUTOCAD 3-D MODELING & SOLID MODELING 3 Credits 2 Class Hours, 2 Lab Hours
NASHVILLE STATE TECHNICAL COMMUNITY COLLEGE COURSE INFORMATION Date Revised: November 2007 By: Bryan Evans CAD 2113 AUTOCAD 3-D MODELING & SOLID MODELING 3 Credits 2 Class Hours, 2 Lab Hours This is an
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationCAPILANO UNIVERSITY COURSE OUTLINE
CAPILANO UNIVERSITY COURSE OUTLINE Term: Fall 2015 Course No. APSC 130 Course: TECHNICAL DRAFTING AND COMPUTER-AIDED DESIGN INSTRUCTOR Office: FR?? Tel: 604-986-1911 (Ext.??) email: @capilanou.ca Credits:
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY
More informationComputer Aided Design I
Black Horse Pike Regional School District 580 Erial Road, Blackwood, NJ 08012 Computer Aided Design I COURSE OF STUDY Technology Department Written by: Ken Whalen, Steve Arena and Vince Mannino Date: May
More informationStudent s Signature Completion Date. High School Teacher s Signature. Recommended Grade High School. CAD software used: CAM software used:
Student s Name 2 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now/ Student s Signature Completion Date High School Teacher s Signature Recommended Grade High School CAD
More informationDesign and Communication Graphics
Design and Communication Graphics Scheme of Work 2014-2015 Ballyhaunis Community School Mission statement The DCG department aspires to provide a safe, stimulating environment where all students can develop
More informationBCN 1251C Construction Drawing Section: Credits Spring 2016
BCN 1251C Construction Drawing Section: 5889 3 Credits Spring 2016 Meeting Location: RNK210 Meeting Time: T, R 8-9 Periods Instructor: Yuanxin 'Alex' Zhang Logan K. To Ph.D. Candidate Office: RNK324 Office:
More informationCOURSE OUTLINE GRAPHIC COMMUNICATIONS FOR ARCHITECTURE wk Credits Class or Lecture Lab. Work Hours Course Length
COURSE OUTLINE ARC102 Course Number GRAPHIC COMMUNICATIONS FOR ARCHITECTURE Course Title 3 1 4 15 wk Credits Class or Lecture Lab. Work Hours Course Length Catalog Description: A lecture/studio course
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationBCN 1251C Construction Drawing Section: Credits Fall 2016
Meeting Location: RNK210 Instructor: BCN 1251C Construction Drawing Section: 5889 3 Credits Fall 2016 Meeting Time: T, R 8-9 Periods (3:00-4:55pm) TA: Nichole Campbell, Ph.D., LEED GA Logan K. To Research
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305 Class Hours: 3 Credit Hours: 4 Laboratory Hours: 3 Date Revised: Spring 2011 NOTE: This course is designed
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10-12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction
More informationStudent s Signature Completion Date. High School Teacher s Signature Date. Recommended Grade High School. COCC Review Instructor s Signature
2 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now/ Student s Name Student s Signature Completion Date High School Teacher s Signature Date Recommended Grade High School
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL 3D MODELING W/LAB CID 2112 (formerly CID 2115) Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 0.0 Revised: Fall 08 Catalog
More informationSYLLABUS. Apprenticeship Training Scheme
SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationKankakee Community College
Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces
More informationGraphic Communication Assignment General assessment information
Graphic Communication Assignment General assessment information This pack contains general assessment information for centres preparing candidates for the assignment Component of Higher Graphic Communication
More informationENGINEERING TECHNOLOGIES ENGINEERING GRAPHICS & DESIGN/DRAFTING Associate in Applied Science: 75 Credit Hours
ENGINEERING TECHNOLOGIES ENGINEERING GRAPHICS & DESIGN/DRAFTING Associate in Applied Science: 75 Credit Hours Prior Learning Assessment Opportunities ETDG 1143 Course Introduction to Design/Drafting ETDG
More informationTEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I
Parsippany-Troy Hills School District TEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I Developed: June 2004 Revised: October 2012 June 2016 Approved
More informationParametric Design 1
Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS COMPUTER APPLICATIONS FOR INTERIOR DESIGN: STUDIO II IDT2306
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS COMPUTER APPLICATIONS FOR INTERIOR DESIGN: STUDIO II IDT2306 Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 0.0 Revised: Fall 2017 Catalog Course
More informationAuto-CAD 2005 Seminar DFTG 1091
HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS
More informationAutodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 1]
11/29/2006-3:00 pm - 4:30 pm Room:Marcello - 4404 (MSD Campus) Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 1] Daniel Banach - MasterGraphics MA24-2 Are you preparing to
More informationAuto-CAD Complete DFTG 1091
HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD
More informationCOURSE OF STUDY UNIT PLANNING GUIDE ARCHITECTURE G RADE LEVEL: CREDITS CURT BANICKI 1 F ULL YEAR MICHAEL WEBER, ASST. PRINCIPAL JULY 2018
COURSE OF STUDY UNIT PLANNING GUIDE FOR: ARCHITECTURE G RADE LEVEL: 11 12 5 CREDITS CURT BANICKI 1 F ULL YEAR PREPARED BY: MICHAEL WEBER, ASST. PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR JULY 2018 DUMONT
More informationAdvanced Computer Aided Design COURSE OUTLINE
Advanced Computer Aided Design COURSE OUTLINE 1. Course Title: Advanced Computer Aided Design 2. CBEDS Title: Computer Aided Drafting/Design 3. CBEDS Number: 5705 4. Job Titles: Framers Construction Inspectors
More informationDrafting & Design Technology
131 Location: Library Tower - 2nd Floor Program Information Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and ability of highly skilled
More informationCOURSE SYLLABUS. Course Prefix Number:
COURSE SYLLABUS COURSE IDENTIFICATION Course Prefix Number: ETEC121 Course Title: Engineering Graphics I Division: Applied Science Division Program: Industrial Engineering Technology Credit Hours: 3 Revision
More informationC A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010
C A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010 TECHNICAL DRAWING GENERAL PROFICIENCY Copyright 2010 Caribbean
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL DRAWING W/LAB CID 1210
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL DRAWING W/LAB CID 1210 Class Hours: 3.0 Credit Hours: 4.0 Lab Hours: 3.0 Revised: Fall 2010 Catalog Course Description: An introduction
More informationESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline Course Number & Name: ENR 103 Engineering Graphics and Introduction
More informationArchitectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab)
Architectural Drafting (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: 1. 1310 Microstation (required) 2. Knowledge of basic computer operations and
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationOFFICE OF CURRICULUM, INSTRUCTION & PROFESSIONAL DEVELOPMENT HIGH SCHOOL COURSE OUTLINE
OFFICE OF CURRICULUM, INSTRUCTION & PROFESSIONAL DEVELOPMENT HIGH SCHOOL COURSE OUTLINE Department Visual/Performing Arts Course Title Architectural Design 1-2 Course Code 2601 Grade Level 10-12 Course
More informationResidential Design Using AutoCAD 2018
Daniel John Stine CSI, CDT Residential Design Using AutoCAD 2018 Includes video instruction SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE
More informationUNIT Computer Aided Draughting (CAD) for Engineers (SCQF level 5)
National Unit Specification: general information CODE F5H4 11 SUMMARY This Unit may form part of a National Qualification Group Award or may be offered on a free standing basis. This largely practical
More informationEngineering Technology (ETEC) 12 Introduction to Engineering Design (IED) Course Syllabus
Engineering Technology (ETEC) 12 Introduction to Engineering Design (IED) Course Syllabus Instructor: Rick Hughes Office Hours Room: Phone: (310 660-3593 Mon-Wed-Thur TA 201 Ext 3624 5:00-6:00 p.m. E-mail
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. VISUALIZATION TECHNIQUES IDT 2630 (formerly IDT 1600)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS VISUALIZATION TECHNIQUES IDT 2630 (formerly IDT 1600) Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 3.0 Revised: Fall 06 NOTE: This
More informationSCHOOL OF INDUSTRIAL DESIGN
CARLETON UNIVERSITY SCHOOL OF INDUSTRIAL DESIGN IDES 1301B INTRODUCTORY PROJECTS II COURSE OUTLINE WINTER 2017 1. GENERAL COURSE INFORMATION AND SCHEDULING Instructor: Stephen Field, stephen.field@carleton.ca
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code DRA-001 Course Outline of Record 1. Course Code: DRA-001 2. a. Long Course Title: Technical Drafting I b. Short Course Title: TECHNICAL DRAFTING I 3. a. Catalog Course
More informationInventor 2016 Essentials Plus
Autodesk NEW Features a chapter on sheet metal design Inventor 2016 Essentials Plus Daniel T. Banach & Travis Jones SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Fall 00 NOTE: This course is not
More informationDrafting/CAD. 230 Drafting/CAD. Faculty and Offices. Certificates and Degrees Awarded. Certificate of Achievement Requirements: Drafting/CAD
230 Drafting/CAD Drafting/CAD The 21st century is witnessing a rapid growth in science, engineering and technology. This will require society to read, write and draw the language of technology drafting.
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationComputer Aided Drafting & Design (CADD)
Elizabethtown Area School District Computer Aided Drafting & Design (CADD) Course Number: 762 Length of Course: 1 semester 18 weeks Grade Level: 10-12 Elective Total Clock Hours: 120 hours Length of Period:
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationINTD-1100: HAND DRAFTING AND SKETCHING FOR INTERIORS
INTD-1100: Hand Drafting and Sketching for Interiors 1 INTD-1100: HAND DRAFTING AND SKETCHING FOR INTERIORS Cuyahoga Community College Viewing:INTD-1100 : Hand Drafting and Sketching for Interiors Board
More informationMOREHEAD STATE UNIVERSITY
MOREHEAD STATE UNIVERSITY College of Science and Technology Department of Applied Engineering Technology ITCD 405 Civil Drafting...3 credits Semester: Spring 2011 LCB 215 INSTRUCTOR: Dr. Sanjeev Adhikari
More informationSan José State University Aerospace Engineering AE20 Computer-Aided Design for Aerospace Engineers, Fa
San José State University Aerospace Engineering AE20 Computer-Aided Design for Aerospace Engineers, Fa11 2017 Instructor: Office Location: Robert Benzio E407 Telephone: (408) 203-0457 Email: Office Hours:
More informationCOURSE OUTLINE. Course Number Course Title Credits. Co- or Pre-requisite BCT110 Construction Materials & Methods
COURSE OUTLINE Course Number Course Title Credits BCT101 Construction Graphics 3 Hours: 2 Lecture 2 Studio/Lab, Co- or Pre-requisite BCT110 Construction Materials & Methods Implementation sem/year Fall
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationMIDLAND COLLEGE SYLLABUS DFTG 1305 TECHNICAL DRAFTING 2-4
Course Description: Text, References, and Supplies: A computer-aided modeling course. Development of three-dimensional drawings and models from engineering sketches and orthographic drawings and utilization
More informationCourse Syllabus Spring Semester, WLAC Course: ARC 172 Architectural Drawing 1 (CSU) 3.00 Units LAIAD Course: ARCH 111B
Los Angeles Institute of Architecture and Design West Los Angeles College Course Syllabus Spring Semester, 2014 WLAC Course: ARC 172 Architectural Drawing 1 (CSU) 3.00 Units LAIAD Course: ARCH 111B PRE-REQUISITE
More informationITT Technical Institute. CD140 Rapid Visualization Onsite and Online Course SYLLABUS
ITT Technical Institute CD140 Rapid Visualization Onsite and Online Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or Corequisite(s):
More informationGRAPHIC COMMUNICATION Advanced Higher
GRAPHIC COMMUNICATION Advanced Higher Second edition published April 2000 NOTE OF CHANGES TO ADVANCED HIGHER ARRANGEMENTS SECOND EDITION PUBLISHED APRIL 2000 COURSE TITLE: Graphic Communication (Advanced
More informationArchitectural Drafting-Residential (DFTG 1317)
Architectural Drafting-Residential (DFTG 1317) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Co-requisite: DFTG 1305; DFTG 1310 Course Description Architectural drafting procedures, practices,
More informationCOWLEY COLLEGE & Area Vocational Technical School
COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR Student Level: This course is open to students on the college level in either the Freshman or Sophomore year. Catalog Description:
More informationESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline Course Number & Name: ENR 106 Intermediate Computer-Aided Design Credit
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS VISUAL COMMUNICATION: STUDIO II IDT 1216
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS VISUAL COMMUNICATION: STUDIO II IDT 1216 Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 0.0 Revised: Spring 2013 NOTE: This course is designed
More information1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)
Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This
More informationIntroduction to AutoCAD 2012
Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The
More informationCertificate. Estimated Program Length & Cost *
159 The College for Real Careers (DDT) Program Information Average Full-Time Wage Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and
More informationComputer Aided Drafting and Design
Computer Aided Drafting and Design Degrees: AAS Computer Aided Drafting and Design 60-63 Diploma: Computer Aided Drafting and Design 48-51 Certificates: Computer Assisted Drafter 30-36 Detailer 25-28 Drafter
More informationBasic Computer Aided Drafting (DFTG 1309) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: DFTG-1305
Basic Computer Aided Drafting (DFTG 1309) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: DFTG-1305 Course Description An introduction to computer aided drafting.
More informationGraphic Communication
N5 Graphic Communication Fore name Surname Total Marks 50 Attempt all questions. All dimensions in mm. All technical sketches and drawings use third angle projection. You may use rulers, compasses or trammels
More informationCOURSE CONTENTS FOR THE AVTS COURSES
Revision: 00 LEARNING CONTENT Page 1 of 14 COURSE CONTENTS FOR THE AVTS COURSES AT CAD- CAM LAB, ATI, VIDYANAGAR, HYDERABAD Revision: 00 LEARNING CONTENT Page 2 of 14 III COURSE CODE CAD-01 IV COURSE TITLE
More informationCity University of Hong Kong. Information on a Course offered by Division of Building Science & Technology with effect from Semester A in 2012/2013
City University of Hong Kong Information on a Course offered by Division of Building Science & Technology with effect from Semester A in 2012/201 Part I Course Title: Course Code: Course Duration: Building
More informationSoftware Development & Education Center NX 8.5 (CAD CAM CAE)
Software Development & Education Center NX 8.5 (CAD CAM CAE) Detailed Curriculum Overview Intended Audience Course Objectives Prerequisites How to Use This Course Class Standards Part File Naming Seed
More informationCOURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2
COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS TECHNICAL ILLUSTRATION W/LAB CID 1110
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS TECHNICAL ILLUSTRATION W/LAB CID 1110 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Fall 05 Catalog Course Description:
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Spring 05 Catalog Course Description:
More informationKankakee Community College
Kankakee Community College Course Prefix and Number: DRFT 2414 Course title: Architectural Drafting with Revit Credit hours: 4 Lecture hours: 2 Lab hours: 4 Semester: Spring 2015 Catalog Description: Prerequisite:
More informationDrafting Technology (DT) Contact the Design and Consumer Eudcation Department for further information. (760) , ext Office: ST-49
Disability Resource-Drafting Technology This individualized course is designed to assess, by means of diagnostic testing and the California Community College learning disability eligibility process, the
More informationDOCUMENTATION 2B DELIVERY SCHEDULE & ASSESSMENT PLAN (DSAP)
DELIVERY SCHEDULE & ASSESSMENT PLAN (DSAP) Unit/Module Code & Title Course Code & Title Learning Portfolio Pre-requisite Unit(s) BDCAD402A Produce technical drawings to architectural conventions using
More informationIndustrial Technology Graphics Technologies
2010 HIGHER SCHOOL CERTIFICATE EXAMINATION Industrial Technology Graphics Technologies Total marks 40 General Instructions Reading time 5 minutes Working time 1 1 hours 2 Write using black or blue pen
More informationComputer Aided Draughting for Engineers
Higher National Unit Specification General information for centres Unit title: Computer Aided Draughting for Engineers Unit code: DR1X 34 Unit purpose: This Unit has been designed to enable candidates
More informationTable of Contents. Templates to download. Configuring your system Customizing your wheel mouse System Requirements
Table of Contents Introduction About this book Templates to download About the Author Configuring your system Customizing your wheel mouse System Requirements Intro-1 Intro-1 Intro-1 Intro-2 Intro-8 Intro-9
More informationModel House Exercise-( Extrude)
-( Extrude) Prerequisite knowledge Focus of the lesson Commands Used This lesson requires an understanding of using the sketch commands including Inserting a new sketch Adding sketch geometry Understanding
More informationMechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationDrafting/CAD. 234 Drafting/CAD. Faculty and Offices. Certificates and Degrees Awarded. Certificate of Achievement Requirements: Drafting/CAD
234 Drafting/CAD Drafting/CAD The 21st century is witnessing a rapid growth in science, engineering and technology. This will require society to read, write and draw the language of technology drafting.
More informationComputer Aided Design Parametric Modelling
Level: 2 Credit value: 10 Unit aim The use of computer aide design (CAD) systems in industry has become an essential part of the modern working environment. It is used at all stages of the design period,
More informationNATIONAL CERTIFICATE (VOCATIONAL)
NATIONAL CERTIFICATE (VOCATIONAL) SUBJECT GUIDELINES ENGINEERING GRAPHICS AND DESIGN (CAD) NQF Level 3 September 2007 ENGINEERING GRAPHICS AND DESIGN (CAD) LEVEL 3 CONTENTS INTRODUCTION 1 DURATION AND
More informationAdvanced study of theatrical painting techniques. Lab and production work required. (3)
COURSE APPROVAL DOCUMENT Southeast Missouri State University Department: The Conservatory of Theatre and Dance Course No. TH 481 Title of Course: Scene Painting II Date: 09/27/16 I. Catalog Description:
More informationDFTG Blueprint Reading and Sketching
Course Syllabus DFTG 1325 - Blueprint Reading and Sketching Catalog Description: An introduction to reading and interpreting working drawings for fabrication processes and associated trades. Use of sketching
More informationIED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps.
IED Detailed Outline Unit 1 Design Process Time Days: 16 days Understandings An engineering design process involves a characteristic set of practices and steps. Research derived from a variety of sources
More informationDepartment of Teaching & Learning Parent/Student Course Information. Engineering Design (AT 8530) Three Credits, One Year Grades 9-12
Department of Teaching & Learning Parent/Student Course Information Engineering Design (AT 8530) Three Credits, One Year Grades 9-12 Counselors are available to assist parents and students with course
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationPARSIPPANY-TROY HILLS TOWNSHIP SCHOOLS A COURSE OUTLINE FOR TEC 631 ENGINEERING CAD II
PARSIPPANY-TROY HILLS TOWNSHIP SCHOOLS A COURSE OUTLINE FOR TEC 631 ENGINEERING CAD II APPROVED BY THE BOARD OF EDUCATION Developed: August 1990 Revised: August 2007 September 2009 October 2012 January
More informationENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems
Spring Semester 2016 ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems Disclaimer Problems in this study guide resemble problems relating mainly to the pertinent homework assignments.
More informationOFFICE OF CURRICULUM & INSTRUCTION DRAFTING I. Grades Credits: 5
OFFICE OF CURRICULUM & INSTRUCTION DRAFTING I Grades 9-12 Credits: 5 ABSTRACT Drafting I offers the student an excellant foundation in drafting with hands- on experience in the development of individual
More information