XPR10A. BendPakSKU

Transcription

1 Ser vi cemanual S er vi cepar t s& Di agr ams T hi sgui dei sat r oubl es hoot i ngr ef er enceus edf ormai nt ai ni ngands er vi ci ngyour BendPakpr oduct.i tpr ovi descompr ehens i vei nf or mat i ononi dent i f yi ngs er vi ceabl e par t sandcomponent sandas s i s t si nt r oubl es hoot i ngpr obl emsandper f or mi ng as s embl y/ di s as s embl ypr ocedur es. XPR10 XPR10SL P BendPakSKU XPR10SL PT wopos tcarl i f t Ver s i one 09/ 15/ 2016

2 ISION DESCRIPTION DTE EDITED BY ECO# D UPDTED BOM ISION 07/18/2016 TM E UPDTED BOM ISION 08/08/2016 TM F UPDTED BOMREIVSION 08/25/2016 TM DETIL SCLE 1 : NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. LL LBELS TO BE PPLIED TO POSTS FTER PINTING. SEE TTCHED LBEL PLCEMENT SHEET. ITEM NO PRT NUMBER DESCRIPTION QTY XPR-10 LIFT SUPERSTRUCTURE 1 R XPR-10S PRTS BOX 1 D XPR-9S/10S-LP MEDIUM RM SSEMBLY 4 F WRNING LI/WL POST DECL KIT, LESS LI 1 C MX CP DNGER 10K MNUFCTURER LBEL MX CP NRTL DNGER 10K PRODUCT DT LBEL _SERIL_TG DO NOT SCLE DRWING DIMENSIONS RE IN MM DRWN NME TM DTE 12/15/2015 CHECKED DB 09/06/2016 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SNT PUL, C XPR-10S-LP PRODUCTION LIFT VER E SCLE: 1:30 F SHEET 1 OF 2

3 mm DRIVE THRU mm [ "] mm [ "] WITH 63mm [2.5"] SNT PUL, C TITLE: XPR-10S-LP PRODUCTION LIFT VER E F SCLE: 1:45 SHEET 2 OF 2

4 E 24 ISION DESCRIPTION DTE EDITED BY ECO# DDED (2) , REPLCED WITH , REPLCED WITH G , UPDTED TITLE TO REFLECT WHERE 06/17/2013 TM USED, UPDTED BOM ISION ND NEXT SSEMBLIES H UPDTED BOM ISION 06/02/2014 TM J REPLCED WITH , UPDTED 10/06/2014 NEXT SSEMBLY TM J-001 J-002 UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLIES 11/18/ /15/2015 JM TM DETIL E SCLE 1 : C B DETIL SCLE 1 : DETIL C SCLE 1 : 4 NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING NEXT SSEMBLY DETIL B SCLE 1 : 12 ITEM NO PRT NUMBER DESCRIPTION QTY GP-7/PL-6000/XPR SERIES SFETY CLEVIS PIN XPR PLSTIC COVER BLOCK 105 x 80 2 C NUT 9/16"-18 JN FTG ELB -04 NPT L x -04 JIC FTG ELB -06 JIC -06L ORB FTG TEE -04JIC -04JIC -06JIC MODEL#211 HIR PIN/ LRGE PHPS M6 x 1 x WSHER, M12 FLT WSHER NUT M12 x RUBBER GROMMET, 3/4 I.D NUT M8 x 1.25 NL HHB M8 x 1.25 x WSHER M10 x Ø18 SL NUT M10 x HEX HED BOLT M10x1.25x WIRE DI., Ø20.5 x 75 LG STS M4.2 x 1.7 x C WSHER SHIM FOR LIFTS WSHER M10 x Ø20 FLT NUT M10 x 1.5 NL ROTOR CLIP 12mm SS BHS 6-32 x HN ROMEX CONNECTOR 3/8 # DO NOT SCLE DRWING DIMENSIONS RE IN MM DRWN NME TM DTE 02/11/2010 CHECKED C 02/19/2016 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SNT PUL, C XPR CLERFLOOR PRTS BG SCLE: 1:30 J SHEET 1 OF 1

5 ISION F DESCRIPTION UPDTED BOM ISIONS DTE EDITED BY ECO# 10/08/2014 TM G REPLCED WITH /26/2015 TM H UPDTED BOM ISIONS ND NEXT SSEMBLY 11/23/2015 TM DETIL SCLE 1 : 6 NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY XPR-10 INNER TOP TROUGH WELDMENT 1 E XPR-10 OUTER TOP TROUGH WELDMENT 1 E GP/PCL/XPR/PL-7000 SFETY SHEVE SPCER 2 C GP/PCL/XPR/PL-7000 SFETY SHEVE 2 C XPR-9S/10 SHEVE SSEMBLY 4 F XPR-9/10 CBLE SHEVE PIN WELDMENT 4 F HHB M6 x 1 x HHB M6 x 1 x HHB M10 x 1.5 x NUT M10 x 1.5 NL NUT M6 x 1.0 NL WSHER M10 x Ø20 FLT STEEL HOLE PLUG 1 1/4" XPR TRIP STOP BR SLIDER WELDMENT 1 C XPR STOP BR CUSHION 1 C SSS M6x1x WSHER M10 x Ø18 SL NUT M10 x XPR-10/10 MICROSWITCH STOP BR WELDMENT 1 B DO NOT SCLE DRWING NME DTE DRWN TM 08/03/2010 SNT PUL, C CHECKED C 02/17/2016 THIRD NGLE PROJECTION TITLE: XPR-10 TOP TROUGH SSEMBLY DIMENSIONS RE IN MM PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED SCLE: 1:18 H SHEET 1 OF 2

6 3209 COLLPSED 3539 EXTENDED SNT PUL, C TITLE: XPR-10 TOP TROUGH SSEMBLY SCLE: 1:15 H SHEET 2 OF 2

7 ISION DESCRIPTION DTE EDITED BY ECO# D UPDTED BOM ISION 03/21/2016 TM E UPDTED BOM ISION ND NEXT SSEMBLY, UPDTED TITLE TO REFLECT WHERE USED 06/29/2016 TM F UPDTED BOM ISION 07/18/2016 TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY XPR-10S-LP MEDIUM RM WELDMENT 1 F WSHER M10 x Ø20 FLT WSHER M10 x Ø18 SL 3 - DO NOT SCLE DRWING NME DTE DRWN JM 06/23/2015 SNT PUL, C DIMENSIONS RE IN MM CHECKED DB 07/01/2016 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE PROHIBITED. WRITTEN PERMISSION OF BENDPK INC. IS SHEET 1 OF 1 TITLE: XPR-9S/10S-LP MEDIUM RM SSEMBLY SCLE: 1:5 F

8 ISION DESCRIPTION DTE EDITED BY ECO# J UPDTED BOM ISION 11/19/2014 TM K UPDTED BOM ISION 05/14/2015 TM L UPDTED BOM ISIONS 11/03/2015 HG NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN 8 7 NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY XPR-10/10 LIFT HED WELDMENT 1 K PL-6000/7000, GP/XPR SERIES GUIDE BLOCK 8 E GP/RTL, XPR-9/10 Ø25mm GER SHFT 2 E GP/RTL/XPR RM INTERNL GER STOP 2 E GP-7, RTL-8000, XPR-9/10 LIFT HED SPRING 2 C SPRING PIN M6 x SNP RING TRURC KEYRING 56mm x 3mm XPR-9/10 LIFT HED GUSSET COVER 1 E DO NOT SCLE DRWING NME DTE DRWN TM 08/30/2010 SNT PUL, C CHECKED C 02/18/2016 DIMENSIONS RE IN MM THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: XPR-10/10 LIFT HED SSEMBLY SCLE: 1:12 L SHEET 1 OF 1

9 ISION DESCRIPTION DTE EDITED BY ECO# M UPDTED BOM ISIONS 11/19/2014 TM N UPDTED BOM ISION 05/14/2015 TM P UPDTED TITLE TO REFLECT MRKETING, UPDTED BOM ISIONS 11/24/2015 TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN 2 NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY XPR-10 POWER SIDE POST WELDMENT 1 H XPR-9S/10 SHEVE SSEMBLY 1 F XPR-9/10 CBLE SHEVE PIN WELDMENT 1 F GP/PCL/XPR/PL-7000 SFETY SHEVE 1 C GP/PCL/XPR/PL-7000 SFETY SHEVE SPCER 1 C NUT M6 x 1.0 NL HHB M6 x 1 x HHB M6 x 1 x RUBBER GROMMET, 3/4 I.D XPR-10/10 LIFT HED SSEMBLY 1 L CYLINDER SSEMBLY Ø2.0 x 69 1 F XPR LIGHT DUTY CYLINDER STOPPER 1 DO NOT SCLE DRWING NME DTE DIMENSIONS RE IN MM DRWN TM 08/30/2010 CHECKED C 02/18/2016 THIRD NGLE PROJECTION TITLE: PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED SNT PUL, C XPR-10/10 POWER SIDE POST SSEMBLY SCLE: 1:22 P SHEET 1 OF 1

10 ISION DESCRIPTION DTE EDITED BY ECO# M UPDTED BOM ISIONS 11/19/2014 TM N UPDTED BOM ISION 05/14/2015 TM P UPDTED TITLE TO REFLECT MRKETING, UPDTED BOM ISIONS 11/12/2015 TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN 2 NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY XPR-10 OFF SIDE POST WELDMENT 1 F XPR-9S/10 SHEVE SSEMBLY 1 F XPR-9/10 CBLE SHEVE PIN WELDMENT 1 F GP/PCL/XPR/PL-7000 SFETY SHEVE 1 C GP/PCL/XPR/PL-7000 SFETY SHEVE SPCER 1 C NUT M6 x 1.0 NL HHB M6 x 1 x HHB M6 x 1 x XPR-10/10 LIFT HED SSEMBLY 1 L CYLINDER SSEMBLY Ø2.0 x 69 1 F XPR LIGHT DUTY CYLINDER STOPPER 1 DO NOT SCLE DRWING NME DTE DRWN TM 08/30/2010 SNT PUL, C DIMENSIONS RE IN MM CHECKED C 02/18/2016 THIRD NGLE PROJECTION TITLE: PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE PROHIBITED. WRITTEN PERMISSION OF BENDPK INC. IS SHEET 1 OF 1 XPR-10/10 OFF SIDE POST SSEMBLY SCLE: 1:22 P

11 ISION DESCRIPTION DTE EDITED BY ECO# C UPDTED BOM ISIONS 02/19/2016 TM D UPDTED BOM ISIONS 8/10/2016 TM E UPDTED BOM ISIONS 08/25/2016 TM ITEM NO. PRT NUMBER DESCRIPTION QTY ROUND LIFT PD DPTER RUBBER PD 1 D S RING Ø35mm INNER SCREW 1 B S RING Ø45mm ROUND LIFT PD SCREW DPTOR 1 D ROUND LIFT PD DPTOR WELDMENT 1 C NOTE: UNLESS OTHERWISE SPECIFIED. 1. SSEMBLE ITEMS S SHOWN NEXT SSEMBLY DO NOT SCLE DRWING DIMENSIONS RE IN MM DRWN NME CHY DTE 06/14/2015 CHECKED THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SNT PUL, C ROUND DJUSTBLE LIFT PD SSEMBLY SCLE: 1:3 E SHEET 1 OF 1

12 ISION DESCRIPTION DTE EDITED BY ECO# P UPDTED BOM ISIONS 11/24/2014 TM Q UPDTED BOM ISIONS 05/14/2015 TM R UPDTED BOM ISIONS ND NEXT SSEMBLIES 12/08/2015 TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY XPR-10/10 POWER SIDE POST SSEMBLY 1 P XPR-10/10 OFF SIDE POST SSEMBLY 1 P XPR-10 TOP TROUGH SSEMBLY 1 H DO NOT SCLE DRWING NME DTE DRWN TM 01/22/2010 SNT PUL, C CHECKED C 02/23/2016 DIMENSIONS RE IN MM THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: XPR-10 LIFT SUPERSTRUCTURE SCLE: 1:30 R SHEET 1 OF 1

13 ISION B DESCRIPTION UPDTED BOM ISIONS DTE EDITED BY ECO# 03/23/2016 TM C REPLCED WITH , UPDTED BOM ISION 08/08/2016 TM D UPDTED BOM ISION 0/25/2016 TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. INSERT PRTS BG INTO PRTS BOX FOR SHIPMENT 3. THRED WITH ONTO CBLES FOR SHIPMENT 4. HOSES ND CBLES IN REPRESENTTIONL FORM 5. FOR SPECIFICTIONS REFER TO PRT SPECIFICTION FORM (*) QTY FOR REFERENCE ONLY NEXT SSEMBLY ITEM NO NUMBER DESCRIPTION QTY XPR CLERFLOOR PRTS BG 1 J XPR-9/10 LIFT HED PIN WELDMENT 4 D XPR-10 CBLE SSEMBLY Ø10 x 10076mm DBST 2 4 XPR CLERFLOOR HYDRULIC HOSE SSY Ø6.35 x 2299mm SB 1 E XPR HYDRULIC HOSE SSY Ø10 x 1219mm SB 1 C XPR-10/10 Ø2.4 x 7747 SFETY CBLE 1 E XPR-10 HYDRULIC HOSE SSY Ø6.35 x 8015 SB 1 F XPR POWER SIDE SFEY SSEMBLY 1 F XPR OFF SIDE SFETY WELDMENT 1 E POWER UNIT VIBRTION DMPENER 1 B ROUND DJUSTBLE LIFT PD SSEMBLY 4 E XPR-10 SERIES POST SSEMBLY LIFT HED FOOT GURD TWO POST LIGHT DUTY BOLT ON RM RESTRINT GER 4 E XPR CLERFLOOR POWER SIDE SFETY COVER 1 E XPR-9D/10/12/12FD/15/18C OFF SIDE SFETY COVER 1 E RM DPTER, MEDIUM 4 D WSHER M18 FLT NUT M18 x 2.5 NL C RING Ø38mm OD DOUBLE THREDED ROD M10 x 1.5 x B XPR MICROSWITCH COVER, PLSTIC MDS-6K, XPR-9D/10 HYDRULIC HOSE SSY Ø6.35 x 330mm DS 1 E FTG NPL -04 JIC x -04 JIC B 3/4" x 5" SFETY TIPS CRD LI-ST SFETY MNUL LI / SM LIGN OIM OPERTION INSPECTION & MINTENNCE LI/LP FRME ENGGING LIFTS GUIDE XPR-10S SERIES INSTLLTION MNUL SPDT MICRO SWITCH;25@125VC MICRO SWITCH COVER-5P SJO UL 62 CBLE 300vac 3635mm* - DO NOT SCLE DRWING NME DTE DRWN TM 12/15/2015 SNT PUL, C CHECKED DB 09/02/2016 THIRD NGLE PROJECTION TITLE: XPR-10S PRTS BOX DIMENSIONS RE IN MM PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED SCLE: 1:30 D SHEET 1 OF 2

14 SNT PUL, C TITLE: XPR-10S PRTS BOX D SCLE: 1:25 SHEET 2 OF 2

15 ISOMETRIC VIEW FOR REFERENCE ONLY DO NOT SCLE ISION DESCRIPTION DTE EDITED BY ECO# D UPDTED BOM ISION 07/10/2012 TM E REPLCED SOC SCR.25x20x.5 WITH TO REFLECT INVENTORY, UPDTED STMPED INFORMTION 11/20/2014 TM REPLCED -010 BUN 70 WITH , TRU RC N WITH , CUP SEL UN WITH , WR F 12.7POM WITH , WR POM 04/22/2016 TS WITH , RECO D-1500 WITH DDED FOR USE WITH TBLE, UPDTED BOM ISIONS SECTION - 4 SHEET 1 & 2 SCLE 2 : 1 5 NOTE: UNLESS OTHERWISE SPECIFIED DETIL B SCLE 2 : 1 GRESE SELS PRIOR TO SSEMBLY PRESSURE TEST CYLINDER SSEMBLY 100% T 3,600 PSI. (NO LEKS) MRK IN PPROXIMTE LOCTION WITH THE FOLLOWING INFORMTION: MNUFCTURER MONTH/YER PRT NUMBER FOR USE WITH XPR-9DS XPR-10S XPR-10S XPR-10S-168 XPR-10S-LP XPR-10LP ITEM NO. PRT NUMBER DESCRIPTION QTY SNP RINGS WR.125 x 2.00 x PRU 188 x x WR.125 x x SHCS 1/4-20 x 1/2" Ø6mm BONDED SELING WSHER 1 B WPR.187 x DO NOT SCLE DRWING NME DTE DRWN C 05/20/2010 SNT PUL, C DIMENSIONS RE IN INCHES CHECKED C 05/04/2016 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS XPR-10S-168 PROHIBITED. SCLE: 1:1.25 SHEET 1 OF 2 TITLE: CYLINDER SSEMBLY Ø2.0 x F

16 ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM /27/2009 TM UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLY 09/08/ /18/2011 TM MT B UPDTED TITLE TO REFLECT WHERE USED, 01/12/2012 TM C C-001 C-002 UPDTED NEXT SSEMBLIES UPDTED TITLE TO REFLECT WHERE USED, UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES 06/21/ /16/ /24/2015 TM TM TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. FOR ITEM 1 SPECIFICTIONS REFER TO PRT SPECIFICTION FORM 2. (*)ITEM 1 QTY FOR REFERENCE ONLY NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY Ø10 ID HYDRULIC HOSE 1144mm* FTG ELB -06 CRIMP x -06 JIC FTG NPL -06 CRIMP x -06 JIC 1 - DO NOT SCLE DRWING NME DTE DRWN TM 08/27/2009 SNT PUL, C CHECKED C 02/22/2016 DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ± = ± = ±0.13 NGULR: MCH 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: XPR HYDRULIC HOSE SSY Ø10 x 1219mm SB SCLE: 1:2 C SHEET 1 OF 1

17 ISION DESCRIPTION DTE EDITED BY ECO# D D-001 D-002 UPDTED TITLE TO REFLECT WHERE USED, UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLY 07/01/ /14/ /16/2014 TM TM TM E WS 8040 NOW 8015, REPLCED WITH TO REFLECT INVENTORY, UPDTED TITLE TO REFLECT WHERE USED ND 11/20/2014 TM NEXT SSEMBLIES F UPDTED TITLE TO REFLECT MRKETING, UPDTED NEXT SSEMBLY 12/01/2015 TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. FOR ITEM 1 SPECIFICTIONS REFER TO PRT SPECIFICTION FORM 2. (*)ITEM 1 QTY FOR REFERENCE ONLY NEXT SSEMBLY ITEM NO. PRT NUMBER DESCRIPTION QTY Ø6.4 ID HYDRULIC HOSE 7965mm* FTG NPL Ø1/4 CRIMP x -04 JIC FTG ELB Ø1/4 CRIMP x -04 JIC 1 -- DO NOT SCLE DRWING NME DTE DRWN GJ 10/22/2008 SNT PUL, C DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ± = ± = ±0.13 NGULR: MCH 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED CHECKED C 02/22/2016 THIRD NGLE PROJECTION TITLE: PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. XPR-10 HYDRULIC HOSE SSY Ø6.35 x 8015 SB SCLE: 1:2 F SHEET 1 OF 1

18 PRT SPECIFICTION FORM BENDPK Number: MRP Description: 1/4" HYDRULIC HOSE 31CL-0400X Date: 11/10/2015 ECO : Engineering Specification pplication: 1/4 HYDRULIC HOSE Detailed Description: ONE or TWO BRID STEEL WIRE HYDRULIC HOSE : 1/4 / 6.3mm I.D / 13.4mm O.D. SPECS: 3000PSI OR 207 BR WORKING PRESSURE 12000PSI OR 827 BR MINIMUM BURST PRESSURE 2 / 50mm MIN BEND RDIUS COLOR: BLCK 2. Vendor Information pproved Vendor Vendor Part # Contact # Preferred Vendor 1) PRKER ) OR BENDPK ENGINEERING PPROVED EQUIVLENT

19 ISION DESCRIPTION DTE EDITED BY ECO# C UPDTED TITLE TO REFLECT WHERE USED ND NEXT SSEMBLIES 10/07/2014 TM D REPLCED WITH TO REFLECT INVENTORY 11/20/2014 TM E E-001 UPDTED TITLE TO REFLECT WHERE USED, UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES 07/22/ /22/2016 JM C NOTE: UNLESS OTHERWISE SPECIFIED. 1. FOR ITEM 1 SPECIFICTIONS REFER TO PRT SPECIFICTION FORM 2. (*)ITEM 1 QTY FOR REFERENCE ONLY NEXT SSEMBLY ITEM NO. PRT NUMBER DESCRIPTION QTY Ø6.4 ID HYDRULIC HOSE 264mm* FTG NPL Ø1/4 CRIMP x -04 JIC 2 -- DO NOT SCLE DRWING NME DTE DRWN TM 08/30/2010 SNT PUL, C DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ± = ± = ±0.13 NGULR: MCH 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED CHECKED C 02/22/2016 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE PROHIBITED. WRITTEN PERMISSION OF BENDPK INC. IS SHEET 1 OF 1 TITLE: MDS-6K, XPR-9D/10 HYDRULIC HOSE SSY Ø6.35 x 330mm DS SCLE: 1:2 E

20 ISION DESCRIPTION DTE EDITED BY ECO# C UPDTED TITLE TO REFLECT WHERE USED, UPDTED NEXT SSEMBLIES 02/07/2012 TM D D-001 UPDTED TITLE TO REFLECT WHERE USED, UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES 06/27/ /16/2014 TM TM E E-001 REPLCED WITH TO REFLECT INVENTORY UPDTED NEXT SSEMBLIES 11/20/ /24/2015 TM TM NOTE: UNLESS OTHERWISE SPECIFIED. 1. FOR ITEM 1 SPECIFICTIONS REFER TO PRT SPECIFICTION FORM 2. (*)ITEM 1 QTY FOR REFERENCE ONLY NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY Ø6.4 ID HYDRULIC HOSE 2249mm* FTG NPL Ø1/4 CRIMP x -04 JIC FTG ELB Ø1/4 CRIMP x -04 JIC 1 -- DO NOT SCLE DRWING NME DTE DRWN GJ 10/13/2008 SNT PUL, C DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ± = ± = ±0.13 NGULR: MCH 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED CHECKED C 02/22/2016 THIRD NGLE PROJECTION TITLE: PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. XPR CLERFLOOR HYDRULIC HOSE SSY Ø6.35 x 2299mm SB SCLE: 1:2 E SHEET 1 OF 1

21 ISION DESCRIPTION DTE EDITED BY ECO# D UPDTED BOM ISION 03/21/2016 TM E UPDTED BOM ISION 06/29/2016 TM F UPDTED BOM ISION 07/15/2016 TM ISOMETRIC VIEW FOR REFERENCE ONLY DO NOT SCLE NOTE: UNLESS OTHERWISE SPECIFIED. 1. BREK ND DEBURR LL SHRP EDGES 0.3mm 2. REMOVE LL WELD SPLTTER 3. DIMENSIONS SHOWN RE FTER PINTING 4. PINT BENDPK YELLOW (RL-1018) MUST SLIDE FREELY NEXT SSEMBLY ITEM NO NUMBER DESCRIPTION QTY XPR-10-LP MEDIUM RM OUTER TUBE WELDMENT (643mm) 1 D XPR-10S-LP TWO STGE INNER RM WELDMENT (647mm) 1 E XPR-9/10 RM ER 1 D XPR-9/10 BOLT ON ER PLTE 1 E XPR-10-LP MEDIUM RM SUPPORT 1 D DO NOT SCLE DRWING NME DTE DRWN JM 06/23/2015 SNT PUL, C CHECKED DB 08/04/2016 DIMENSIONS RE IN MM TOLERNCES: THIRD NGLE PROJECTION TITLE: 0. = ±1.5 XPR-10S-LP MEDIUM 0.0 = ±0.5 RM WELDMENT NGULR: 0. = 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED SCLE: 1:5 F SHEET 1 OF 2

22 ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM /19/2009 TM B UPDTED TITLE TO REFLECT WHERE USED 06/03/2010 TM C UPDTED TITLE TO REFLECT MRKETING 11/23/2015 TM PL ISOMETRIC VIEW FOR REFERENCE ONLY DO NOT SCLE X TYP 20 2 PL 12 3 MX 6 PL 22 6 PL PL R TYP 76 2 PL DETIL SCLE 1 : PL PL 432 NOTE: UNLESS OTHERWISE SPECIFIED. 1. BREK ND DEBURR LL SHRP EDGES 0.3mm 2. MTERIL: HR STM 36 OR Q235 GB/T FLME CUT EDGES PERMISSBLE DO NOT SCLE DRWING DIMENSIONS RE IN MM TOLERNCES: MCHINE TO 0 = ± = ± = ±0.13 NGULR: MCHINE TO 0. = ±½ SURFCE FINISH 1.6 Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED DRWN NME TM PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS C THE SOLE PROPERTY OF BENDPK INC. NY NEXT SSEMBLY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS SCLE: 1:5 SHEET 1 OF 1 DTE 08/19/2009 CHECKED C 02/08/2016 THIRD NGLE PROJECTION TITLE: SNT PUL, C XPR-10 BSE PLTE

23 PRT SPECIFICTION FORM BENDPK Number: MRP Description: SFETY MNUL LI / SM 93-1 Date: 12/28/2010 ECO : Engineering Specification pplication: LI SFETY MNUL Detailed Description: 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

24 PRT SPECIFICTION FORM BENDPK Number: MRP Description: LIGN OIM OPERTION INSPECTION & MINTENNCE Date: 12/28/2010 ECO : Engineering Specification pplication: LI OPERTION INSPECTION & MINTENNCE MNUL Detailed Description: f 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

25 PRT SPECIFICTION FORM BENDPK Number: MRP Description: LI/LP FRME ENGGING LIFTS GUIDE Date: 12/28/2010 ECO : Engineering Specification pplication: LI LIFTING GUIDE Detailed Description: 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

26 PRT SPECIFICTION FORM BENDPK Number: MRP Description: XPR-10S SERIES INSTLLTION MNUL Date: 09/08/2016 ECO : PRE 1. Engineering Specification pplication: INSTLLTION MNUL Detailed Description: 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

27 PRT SPECIFICTION FORM BENDPK Number: MRP Description: WRNING LI/WL 101 Date: 06/18/2013 ECO : Engineering Specification pplication: LI 2 POST SFETY STICKER KIT Detailed Description: : 14 L x 8.5 W (356mm x 216mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

28 PRT SPECIFICTION FORM BENDPK Number: MRP Description: SFETY TIPS CRD LI-ST 90 Date: 12/28/2010 ECO : Engineering Specification pplication: LI SFETY TIPS Detailed Description: 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

29 PRT SPECIFICTION FORM BENDPK Number: MRP Description: TO PROLONG LIFT OF TWO Date: 06/18/2013 ECO : Engineering Specification pplication: RED CYLINDER WRNING Detailed Description: : 3 L x 1.75 W (76mm x 44mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

30 PRT SPECIFICTION FORM BENDPK Number: MRP Description: BENDPK LBEL; 4 x 38" WHITE INK Date: 05/13/2015 ECO : Engineering Specification pplication: BENDPK LBEL Detailed Description: : 38 L x 4.25 W (965mm x 108mm) Material: Yellow Represents Clear dhesive PET Size: 4.25 W x 38 H Thickness: 4 Mil Finish: Polished Ink: U.V. protected, Opaque White Print Process: Silk Screen, 85 line-screen (Opaque White ink, clear adhesive PET will fill in blank areas.) Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

31 PRT SPECIFICTION FORM BENDPK Number: MRP Description: MX CP DNGER 10K Date: 06/21/2013 ECO : Engineering Specification pplication: LIFT CPCITY STICKER Detailed Description: : 3.25 L x 4.5 W (82mm x 114mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

32 PRT SPECIFICTION FORM BENDPK Number: MRP Description: MNUFCTURER LBEL Date: 05/07/2013 ECO : Engineering Specification pplication: MNUFCTURER LBEL Detailed Description: : L x W (130mm x 130mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

33 PRT SPECIFICTION FORM BENDPK Number: MRP Description: 2-POST SFETY DECL Date: 06/18/2013 ECO : Engineering Specification pplication: 2-POST SFETY DECL Detailed Description: : L x 4 W ( 724m x 100mm) 2. Vendor Information pproved Vendor Vendor Part # Contact # Preferred Vendor 1)

34 PRT SPECIFICTION FORM BENDPK Number: MRP Description: MX CP NRTL DNGER 10K Date: 05/06/2013 ECO : Engineering Specification pplication: LIFT CPCITY STICKER FOR CE LIFTS Detailed Description: : 3.25 L x 4.5 W (82mm x 114mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

35 PRT SPECIFICTION FORM BENDPK Number: MRP Description: PRODUCT DT LBEL Date: 05/06/2013 ECO : Engineering Specification pplication: PRODUCT DT LBEL Detailed Description: : 2.3 L x 4.5 W (58mm x 114mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

36 PRT SPECIFICTION FORM BENDPK Number: MRP Description: 2015_SERIL_TG Date: 11/06/2015 ECO : Engineering Specification pplication: DT SERIL TG 2 POST CE Detailed Description: : 3.48 L x 3.50 W (88.4mm x 88.9mm) 2. Vendor Information (Or for Reference) pproved Vendor Vendor Part # Contact # Preferred Vendor 1) 2) OR BENDPK ENGINEERING PPROVED EQUIVLENT