APPLICATION OF KNOWLEDGE After completing this module, you will be able to: draw circles in CAD graphics using appropriate methods.

Size: px
Start display at page:

Download "APPLICATION OF KNOWLEDGE After completing this module, you will be able to: draw circles in CAD graphics using appropriate methods."

Transcription

1 DRAWING CIRCLES KNOWLEDGE AND UNDERSTANDING After completing this module, you will know and understand the theory regarding: different methods of creating circles in CAD graphics. APPLICATION OF KNOWLEDGE After completing this module, you will be able to: draw circles in CAD graphics using appropriate methods. ASSESSMENT After completion of this module, you will be assessed on: your knowledge and understanding of different methods of creating circles in CAD graphics your ability to create circles in CAD graphics using appropriate methods your saved and printed drawing (Drawing Tutorial 10L) your updated portfolio. Marks will be given for neatness, completeness, correctness and presentation. (Refer to the chapter on portfolios for further details). Chapter 19 - Drawing Circles 123

2 DRAWING CIRCLES There is more to drawing circles than just providing a centre point and a radius. Circles that are created must be placed in relation to existing objects. You must learn to apply the various means of drawing circles within given parameters. center, diameter Once you have specified the centre point, you will be prompted to enter a diameter. You must then enter a distance or drag the circle to the desired size. The value used for the diameter is divided in half, creating a default radius value. A USING AUTOCAD The CIRCLE command The CIRCLE command can be activated by typing circle on the command line or by clicking the circle icon on the Draw toolbar. The command from the toolbar and the command line operate the same. You are presented with a few options and then guided through the process. Read the prompts very carefully, take your time to learn the many variations and you will reap the fruits later. Alternatively you can use the Draw menu to activate the CIRCLE command. You will then be presented with the various options on a drop-down menu. The menu provides you with the following options: two points Select the first point by entering coordinates, or by choosing a point in the drawing window. Select the second endpoint by dragging the circle or by entering coordinates on the command line. The distance between the two points you give will be the diameter of the circle. three points Enter the points one at a time. To establish the point locations, enter the coordinates or select the points in the display window. A C B center, radius (This is also the option given to you when you click on the Circle icon.) AutoCAD prompts you by default to enter a centre point. (At this point you are also given the option to use the two point, three point or tangent, tangent, radius options. Just type 2P, 3P or TTR on the command line and enter it.) tangent, tangent, radius Select the first line, circle, or arc. It will automatically provide you with a tangent snap. Snap to it, then to the second line, circle, or arc. Then enter a value for the radius. Once you have specified the centre point, you will be prompted to enter a radius. (At this point you can switch to entering a diameter by typing a d and entering it.) You can either enter a value for the radius or drag the circle to the desired size. The radius you specified now becomes the new default for future CIRCLE commands. A B tangent, tangent, tangent This option is only available from the menu. You draw the circle by using tangential snaps to three selected objects. The circle will fit itself to the three snap points. 124 CAD for EG&D - Grade 10

3 USING ALLYCAD AllyCAD does not use a single command with many variations the way that AutoCAD does. Rather, it provides many different drawing methods that can each be accessed with a single click. Using commands from the Geometry menu or toolbar A Geometry line is a type of construction line that allows you to position objects prior to actually drawing them. Geometry objects display in a faint dotted line. Geometry circles must be traced over to create circles. The following Geometry circle draw commands are available: Circle- (or Left-click the icon) - Draw Geometry circles with the centre and a point on the diameter Circle Diameter (or Right-click the icon) - Draw up to five concentric Geometry circles with the centre and the diameters Circle 3 Point - Draw a Geometry circle through three points Circle Tan LPtRad (or Left-click the icon)- Draw a Geometry circle tangent to a line and through one point on the radius Circle Tan CPtRad (or Right-click the icon)- Draw a Geometry circle tangent to a circle and through one point on the radius Circle Tan LL (or Left-click the icon)- Draw a Geometry circle tangent to two lines Circle Tan 3L (or Right-click the icon) - Draw a Geometry circle tangent to three lines Circle Tan CC (or Left-click the icon)- Draw a Geometry circle tangent to two circles Circle Tan LC (or Right-click the icon)- Draw a Geometry circle tangent to line and a circle Using commands from the Draw menu or toolbar Using the Draw menu or Draw toolbar allows you to draw circles or to create circles from Geometry circles. The following circle draw commands are available: Circle (or Left-click the icon) - Draw a circle with the centre point and a point on the diameter Circle Diameter (or Right-click the icon) - Draw up to five concentric circles with the centre and the diameters Circle2 Point (or Right-click the icon) - Draw a circle by two points on the diameter Fill Geometry - Draw entities by tracing over Geometry lines and circles Fill Geometry Circle (or Left-click the icon) - Draw a circle by tracing over a Geometry circle Chapter 19 - Drawing Circles 125

4 Drawing Tutorial 10L: Drawing Circles Templates TIME ALLOCATION: 1 HOUR 1. Start a new drawing using the template you created in 10J. 2. Name it and save it in the correct location. 3. Update your title block. 4. Choose an appropriate scale. 5. Draw the templates as shown on the next page by using the appropriate techniques for drawing circles. (Choose from: Center-radius, Center-diameter, 2-point, 3-point, Tangent-tangent-radius, and Tangent-tangent-tangent.) 6. Make full use of all your layers. 7. Make sure that you save regularly. 8. Show all dimensions and annotations. 9. Adhere to the SANS regarding mechanical drawing. 10. Print and save the final drawing. 11. Update your portfolio. 126 CAD for EG&D - Grade 10

5 Drawing Tutorial 10L Drawing Circles Templates Name of Learner Name of FET Institution Scale Date Chapter 19 - Drawing Circles 127

6 NOTES 128 CAD for EG&D - Grade 10

USING LAYERS. Chapter 18 - Layers 117

USING LAYERS. Chapter 18 - Layers 117 USING LAYERS KNOWLEDGE AND UNDERSTANDING After completing this module, you will know and understand the theory regarding: layers different layer settings the use of layers in templates APPLICATION OF KNOWLEDGE

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

Parametric Drawing Using Constraints

Parametric Drawing Using Constraints CHAPTER 10 Parametric Drawing Using Constraints PROJECT EXERCISE This project exercise provides point-by-point instructions for creating the objects shown in Figure P10 1. In this exercise, you will apply

More information

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS.   Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

More information

80 ` AutoCAD 2D I. Module 11. Object Snap PREPARED BY. IAT Curriculum Unit. February 2011

80 ` AutoCAD 2D I. Module 11. Object Snap PREPARED BY. IAT Curriculum Unit. February 2011 80 ` AutoCAD 2D I Object Snap PREPARED BY IAT Curriculum Unit February 2011 Institute of Applied Technology, 2011 Auto CAD Self-paced Learning Modules AutoCAD 2D Object Snap Learning Outcomes: When you

More information

Autodesk AutoCAD 2013 Fundamentals

Autodesk AutoCAD 2013 Fundamentals Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more

More information

An Introduction to Dimensioning Dimension Elements-

An Introduction to Dimensioning Dimension Elements- An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements

More information

Copyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material

Copyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material Engineering Graphics FREEHAND SKETCHING Introduction to Freehand Sketching Sketching is a very important technique for technical communication. Sketches can transfer ideas, instructions and information

More information

AutoCAD 2018 Fundamentals

AutoCAD 2018 Fundamentals Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about

More information

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry 2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply

More information

Engineering Technology

Engineering Technology Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,

More information

80 ` AutoCAD 2D I. Module 7. Drawing Lines Using Polar Coordinates PREPARED BY. IAT Curriculum Unit. February 2011

80 ` AutoCAD 2D I. Module 7. Drawing Lines Using Polar Coordinates PREPARED BY. IAT Curriculum Unit. February 2011 80 ` AutoCAD 2D I Module 7 Drawing Lines Using Polar Coordinates PREPARED BY IAT Curriculum Unit February 2011 Institute of Applied Technology, 2011 Module 7 Auto CAD Self-paced Learning Modules AutoCAD

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

GstarCAD Mechanical 2015 Help

GstarCAD Mechanical 2015 Help 1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Unit. Drawing Accurately OVERVIEW OBJECTIVES INTRODUCTION 8-1

Unit. Drawing Accurately OVERVIEW OBJECTIVES INTRODUCTION 8-1 8-1 Unit 8 Drawing Accurately OVERVIEW When you attempt to pick points on the screen, you may have difficulty locating an exact position without some type of help. Typing the point coordinates is one method.

More information

Chapter 2. Drawing Sketches for Solid Models. Learning Objectives

Chapter 2. Drawing Sketches for Solid Models. Learning Objectives Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various

More information

Step-by-Step Tutorial: Applying Dimensional Constraints

Step-by-Step Tutorial: Applying Dimensional Constraints New Commands in AutoCAD 2010: Part 1 Dimensional Constraints, Part 1 by Ralph Grabowski Introduction One of the really significant new features of AutoCAD 2010 is parametric drafting. This technology allows

More information

10/14/2010. Chevy Malibu. Vehicle Design with Solidworks. Start SolidWorks Create a New SolidWorks Document. Miles, Rowardo B

10/14/2010. Chevy Malibu. Vehicle Design with Solidworks. Start SolidWorks Create a New SolidWorks Document. Miles, Rowardo B Chevy Malibu Vehicle Design with Solidworks Start SolidWorks Create a New SolidWorks Document Miles, Rowardo B 1 Click: Part and then OK Now you are ready to make a Part. 2 Right Toolbar: Document Properties:

More information

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here. AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and

More information

Dimensioning. Subject Matters:

Dimensioning. Subject Matters: Objectives: To define dimensioning. To recognise the different types of dimensions. To define and create a dimension style. To recognise the dimension toolbar and the dimensioning commands. To create dimensions

More information

Toothbrush Holder. A drawing of the sheet metal part will also be created.

Toothbrush Holder. A drawing of the sheet metal part will also be created. Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit

More information

First Level 2D Fundamentals

First Level 2D Fundamentals AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Introduction to 3D CAD with SolidWorks. Jianan Li

Introduction to 3D CAD with SolidWorks. Jianan Li Introduction to 3D CAD with SolidWorks Jianan Li Create a New Part The first time you launch SolidWorks, it asks you to set the default units and dimension standard. Make sure you have IPS and ANSI selected,

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

Beginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS

Beginner s Guide to SolidWorks Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Beginner s Guide to SolidWorks 2008 Alejandro Reyes, MSME Certified SolidWorks Professional and Instructor SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Part Modeling

More information

Drawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum.

Drawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum. Page 1 of 6 Introduction The drawing used for this tutorial comes from Clark R. and M.Pause, "Precedents in Architecture", VNR 1985, page 135. Stephen Peter of the University of South Wales developed the

More information

SolidWorks Navigation

SolidWorks Navigation SolidWorks Basics SolidWorks Navigation Command Bar Feature Tree Model Window Simple Box Select the Front plane Create a new sketch Create a Center Rectangle from the origin Smart Dimension the length

More information

1 Sketching. Introduction

1 Sketching. Introduction 1 Sketching Introduction Sketching is arguably one of the more difficult techniques to master in NX, but it is well-worth the effort. A single sketch can capture a tremendous amount of design intent, and

More information

Tutorial 3: Drawing Objects in AutoCAD 2011

Tutorial 3: Drawing Objects in AutoCAD 2011 Tutorial 3: Drawing Objects in AutoCAD 2011 Audience: Users new to AutoCAD Prerequisites: None Time to complete: 15 minutes In This Tutorial Please complete the lessons in this tutorial in order. The earlier

More information

Introduction to CATIA V5

Introduction to CATIA V5 Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower

More information

INTRODUCTION. So, explore and experience the K to 12 TLE modules and be a step closer to becoming a successful graphic designer.

INTRODUCTION. So, explore and experience the K to 12 TLE modules and be a step closer to becoming a successful graphic designer. 1 INTRODUCTION Information and Communication Technology (ICT) is one of the components of Technology and Livelihood Education(TLE). It offers a lot of skills appropriate for the jobs offered by the different

More information

AutoCAD 2020 Fundamentals

AutoCAD 2020 Fundamentals Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Assignment 5 CAD Mechanical Part 1

Assignment 5 CAD Mechanical Part 1 Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started

More information

Part 8: The Front Cover

Part 8: The Front Cover Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding

More information

Isometric Circles and Arcs

Isometric Circles and Arcs AutoCAD and Its Applications BASICS Supplemental Material Chapter 4 Isometric Circles and Arcs On an isometric drawing, circles appear as ellipses and arcs as elliptical arcs. You must properly align isometric

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Dimensioning the Bracket Problem

Dimensioning the Bracket Problem C h a p t e r 11 Dimensioning the Bracket Problem In this chapter, you will learn the following to World Class standards: 1. Dimensioning a Multiple View Drawing 2. Placing Center Marks on a Multiple View

More information

Getting Started. Chapter. Objectives

Getting Started. Chapter. Objectives Chapter 1 Getting Started Autodesk Inventor has a context-sensitive user interface that provides you with the tools relevant to the tasks being performed. A comprehensive online help and tutorial system

More information

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000

More information

When you complete this assignment you will:

When you complete this assignment you will: Objjectiives When you complete this assignment you will: 1. create an engineering drawing file using the management file menu. 2. dimension the engineering file using the drawing annotation menu. 3. produce

More information

Relative Coordinates

Relative Coordinates AutoCAD Essentials Most drawings are created using relative coordinates. This means that the next point is set from the last point drawn. The last point drawn is stored as temporary 0,0". AutoCAD uses

More information

ME Week 2 Project 2 Flange Manifold Part

ME Week 2 Project 2 Flange Manifold Part 1 Project 2 - Flange Manifold Part 1.1 Instructions This project focuses on additional sketching methods and sketching commands. Revolve and Work features are also introduced. The part being modeled is

More information

Introduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1

Introduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1 AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an

More information

COMPUTER AIDED DRAFTING (PRACTICAL) INTRODUCTION

COMPUTER AIDED DRAFTING (PRACTICAL) INTRODUCTION LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: 3 COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MCE 511 ENGR. ALIYU, S.J Course title: Computer-Aided Engineering

More information

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).

More information

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011 AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric

More information

COMPUTER PACKAGES II

COMPUTER PACKAGES II UNESCO-NIGERIA TECHNICAL & VOCATIONAL EDUCATION REVITALISATION PROJECT-PHASE II NATIONAL DIPLOMA IN COMPUTER TECHNOLOGY AUTOCAD DBMS DTP SPSS COMPUTER PACKAGES II COURSE CODE: COM 215 YEAR 2- SE MESTER

More information

Chapter 1. Creating, Profiling, Constraining, and Dimensioning the Basic Sketch. Learning Objectives. Commands Covered

Chapter 1. Creating, Profiling, Constraining, and Dimensioning the Basic Sketch. Learning Objectives. Commands Covered Chapter 1 Creating, Profiling, Constraining, and Dimensioning the Basic Sketch Learning Objectives After completing this chapter, you will be able to: Draw the basic outline (sketch) of designer model.

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Dimensioning the Rectangular Problem

Dimensioning the Rectangular Problem C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing

More information

Autodesk Inventor Module 17 Angles

Autodesk Inventor Module 17 Angles Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,

More information

< Then click on this icon on the vertical tool bar that pops up on the left side.

< Then click on this icon on the vertical tool bar that pops up on the left side. Pipe Cavity Tutorial Introduction The CADMAX Solid Master Tutorial is a great way to learn about the benefits of feature-based parametric solid modeling with CADMAX. We have assembled several typical parts

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Pull Down Menu View Toolbar Design Toolbar

Pull Down Menu View Toolbar Design Toolbar Pro/DESKTOP Interface The instructions in this tutorial refer to the Pro/DESKTOP interface and toolbars. The illustration below describes the main elements of the graphical interface and toolbars. Pull

More information

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

Introduction to 3D Printing. Activity 1: Design a keychain using computer-aided design software

Introduction to 3D Printing. Activity 1: Design a keychain using computer-aided design software Introduction to 3D Printing Activity 1: Design a keychain using computer-aided design software 1 In this activity we ll design a keychain name tag and learn the fundamentals of computer-aided design, the

More information

AutoCAD Civil 3D 2009 ESSENTIALS

AutoCAD Civil 3D 2009 ESSENTIALS AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how

More information

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS

Autodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS Autodesk AutoCAD 2012: Fundamentals Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Autodesk AutoCAD 2012: Fundamentals Lesson 3.0 Drawing

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored

More information

When you complete this assignment you will:

When you complete this assignment you will: Objjectiives When you complete this assignment you will: 1. Set-up menus and drawing for designing modeling problems. 2. become familiar with the Sketch menu tools and commands. 3. Produce a three-dimensional

More information

On completion of this exercise you will have:

On completion of this exercise you will have: Prerequisite Knowledge To complete this exercise you will need; to be familiar with the SolidWorks interface and the key commands. basic file management skills the ability to rotate views and select faces

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Creo Extrude Tutorial 3: Hole, Fillets and Rounds

Creo Extrude Tutorial 3: Hole, Fillets and Rounds Creo Extrude Tutorial 3: Hole, Fillets and Rounds By: Matthew Jourden Brighton High School 1. Open Creo Parametric 2. File > Open > extrudetutorial (From Creo Extrude Tutorial 1) NOTE: Minimum of 2 other

More information

Drawing with precision

Drawing with precision Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial

More information

Tutorial Guide to AutoCAD D Drawing 3D Modeling SHAWNA LOCKHART SDC PUBLICATIONS. Schroff Development Corporation

Tutorial Guide to AutoCAD D Drawing 3D Modeling SHAWNA LOCKHART SDC PUBLICATIONS.  Schroff Development Corporation Tutorial Guide to AutoCAD 2011 2D Drawing 3D Modeling SHAWNA LOCKHART SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation INTRODUCTION 55 Basic Construction Techniques Introduction

More information

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command. DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

More information

Getting Started. Before You Begin, make sure you customized the following settings:

Getting Started. Before You Begin, make sure you customized the following settings: Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides

More information

Tutorial Guide to AutoCAD D Drawing, 3D Modeling

Tutorial Guide to AutoCAD D Drawing, 3D Modeling Tutorial Guide to AutoCAD 2019 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com For Microsoft Windows Powered by TCPDF (www.tcpdf.org)

More information

AutoCAD 2D. Table of Contents. Lesson 1 Getting Started

AutoCAD 2D. Table of Contents. Lesson 1 Getting Started AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Introduction to SolidWorks Introduction to SolidWorks

Introduction to SolidWorks Introduction to SolidWorks Introduction to SolidWorks Introduction to SolidWorks SolidWorks is a powerful 3D modeling program. The models it produces can be used in a number of ways to simulate the behaviour of a real part or assembly

More information

Creo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School

Creo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School Creo: Hole, Fillet, and Round Layout/Dimension Tutorial Layout of a Part with Holes 1. Open a blank drawing with your border and title block By: Matthew Jourden Brighton High School 2. Place the front,

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

Inventor Activity 5: Lofted Vase

Inventor Activity 5: Lofted Vase Inventor Activity 5: Lofted Vase In this tutorial, you will use a few new commands to create a free form Lofted object. Sometimes you want to create an object that is not made up of square, flat, or perfectly

More information

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Section 1 Introduction and Review Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Drawing Assignments: NCAA Basketball Court Plot Style Table (Check-off)

More information

Unit 15: Using Symbols and Attributes

Unit 15: Using Symbols and Attributes Unit 15: Using Symbols and Attributes Overview Many electronics drawings use the same geometry over and over. The resistor symbol, commonly found on printed circuit board drawings, is one example. AutoCAD

More information

for Solidworks TRAINING GUIDE LESSON-9-CAD

for Solidworks TRAINING GUIDE LESSON-9-CAD for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation

More information

FastCAM Reference Manual Supplement. How to Draw A Part

FastCAM Reference Manual Supplement. How to Draw A Part FastCAM Reference Manual Supplement How to Draw A Part WIDGET Here you will go through the process of drawing a part in FastCAM based upon a scaled part drawing. For example you might receive a drawing

More information

IT, Sligo. Equations Tutorial

IT, Sligo. Equations Tutorial Equations Tutorial Parametric Modelling: SolidWorks is a parametric modelling system where parameters, such as dimensions and relations, are used to create and control the geometry of the modelled part.

More information

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008 1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical

More information

SolidWorks Reference Geometry

SolidWorks Reference Geometry SolidWorks Reference Geometry IDeATe Laser Micro Part 2 Dave Touretzky and Susan Finger 1. Symmetry and Reference Geometry Today, you ll make this part bear-like face and then cut it on the laser cutter:

More information

AutoCAD 2D Module 14 Trimming and Extending

AutoCAD 2D Module 14 Trimming and Extending AutoCAD Self-paced ecourse AutoCAD 2D Module 14 Trimming and Extending Learning Outcomes When you have completed this module, you will be able to: 1 Describe the geometry of regular polygons. 2 Apply the

More information

Object Snap, Geometric Constructions and Multiview Drawings

Object Snap, Geometric Constructions and Multiview Drawings Object Snap, Geometric Constructions and Multiview Drawings Sacramento City College EDT 310 EDT 310 - Chapter 6 Object Snap, Geometric Constructions and Multiview Drawings 1 Objectives Use OSNAP to create

More information

Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA

Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA Official Guide to Certified SolidWorks Associate Exams: CSWA, CSDA, CSWSA-FEA SolidWorks 2012-2015 An authorized CSWA preparation exam guide with additional information on the CSDA and CSWSA-FEA exams

More information

SDC. Tutorial Guide to AutoCAD D Drawing, 3D Modeling. Table of Contents. Description

SDC. Tutorial Guide to AutoCAD D Drawing, 3D Modeling. Table of Contents. Description Tutorial Guide to AutoCAD 2018 2D Drawing, 3D Modeling Covers 2D drawing and 3D modeling Uses step-by-step tutorials and is written for novice users Organization that parallels an introductory engineering

More information

Compare between Methods of Entering Coordinate System (Absolute, Relative, Polar) in AutoCAD

Compare between Methods of Entering Coordinate System (Absolute, Relative, Polar) in AutoCAD Available online at www.worldscientificnews.com WSN 12 (2015) 49-69 EISSN 2392-2192 Compare between Methods of Entering Coordinate System (Absolute, Relative, Polar) in AutoCAD Lubna Zaghlul Bashir Technology

More information

Lesson 10: Loft Features

Lesson 10: Loft Features 10 Goals of This Lesson Your students will be able to create the following part: profiles chisel This lesson plan corresponds to the Loft Features chapter of SolidWorks Getting Started. SolidWorks Student

More information