training P RO D U C T M A P T R A I N I N G W O R K S U R FA C E & S U P P O RT B A S I C S T R A I N I N G TA B L E B A S I C S...

Transcription

1 P RO D U C T M A P T R A I N I N G W O R K S U R FA C E & S U P P O RT B A S I C S T R A I N I N G TA B L E B A S I C S A C C E S S O RY B A S I C S E D G E T R I M S T Y L E O V E RV I E W U S E R E D G E & G R A I N D I R E C T I O N S U P P O RT C O M PAT I B I L I T Y C H A RT M O D E S T Y PA N E L D E TA I L S E L E C T R I C A L T R AY & C A B L E T R AY D E TA I L S A C C E S S O RY C O M PAT I B I L I T Y C H A RT L I G H T I N G, E L E C T R I C S & C O M M U N I C AT I O N S B A S I C S F I N I S H P ROTO C O L P RO D U C T L I S T I N G

2 worksurfaces C T R T C T C K Cockpit C T T A Trapeze Angular Page 88 Depth: 18" 30" / Width: 36" " Page 89 Depth: 24" or 30" / Width: 36" " Page 90 Depth: 30" / Width: 36" " C T H M Half-Moon Page 92 Depth: 18" 30" / Width: 36" 61" C T M Z Mezzanine Page 93 Depth: 18" 30" / Width: 36" 61" C T C H Page 94 Depth: 18" 30" Curved Hatchet C T Q M Quarter-Moon Page 95 Depth: 18" 30"

3 worksurface supports C T C L C-Leg Page 96 Depth: 24 "/ : 29" / Adjustable Height: 24" 32" Standard Adjustable Height Adjustable Height C T T L T-Leg Page 97 Depth: 18" or 24" / : 29" / Adjustable Height: 24" 32" Standard Adjustable Height Adjustable Height C T S T Intermediate Leg Page 98 Depth: 18" / : 29" / Adjustable Height: 24" 32" Standard Adjustable Height Adjustable Height C T P L Post Leg Page 99 : 29" / Adjustable Height: 24" 32" Adjustable Height

4 tables C T F L Folding Table Page 100 Depth: 18" 30" / Width: 60" " / Height: 29" Standard C-Leg and T-Leg C-Leg and T-Leg C-Leg and T-Leg C T L F Lightweight Folding Table Page 102 Depth: 18" 30" / Width: 60" " / Height: 29" Standard C-Leg and T-Leg C-Leg and T-Leg C-Leg and T-Leg C T F T Flip-Top Table Page 104 Depth: 24" or 30" / Width: 42" " / Height: 29" Standard C-Leg and T-Leg C-Leg C-Leg and T-Leg C T H T Height- Adjustable Table Page 106 Depth: 24" or 30" / Width: 36" " / Adjustable Height: 24" 36" C-Leg C-Leg

5 accessories C T L P CPU Holder C T V L Vertical Leg Cover C T W C Vertical Wire Management Cover Page 108 Page 109 Height: 18" Page 110 Height: 15" C T G M Grommet C T W T Cable Tray C T E T Electrical Tray Page 111 Page 112 Width: 12" Page 113 Width: 24" " C T L M Page 114 Width: 24" " Modesty Panel Laminate C T M M Page 115 Width: 24" " Modesty Panel Metal C T L M F Modesty Panel for Flip-Top Table Laminate Page 116 Width: 42" " C T M M F Page 117 Width: 42" " Modesty Panel for Flip-Top Table Metal C T D S F Fabric Table Screen Page 118 Heights: 15" or 22" / Width: 36" " C T D S T Translucent Table Screen Page 119 Height: 15" or 22" / Width: 36" "

6 accessories (continued) C T D S M Metal Table Screen C T L S F Fabric Lateral Screen C T L S T Translucent Lateral Screen Page 120 Height: 15" or 22" / Width: 36" " Page 121 Height: 15" or 22" / Depth: 24" or 30" Page 122 Height: 15" or 22" / Depth: 24" or 30" C T L S M Metal Lateral Screen Page 123 Height: 15" or 22" / Depth: 24" or 30" C A Q R Page 124 Quick Release Linking System C T M T Page 124 Mobile Table Trolley

7 lighting, electrics & communications R L P P Under- Plug-In Power Bar C L W P Under- Power Outlet C L B X Splitter Box Page 126 Length: " or 1" Page 127 Page 128 C L B F Base Feed C L P H Pass-Through C L M P Power/Data Center Page 129 Length: " Page 130 Length: 18" 120" Page 131 Length: " or 120" C L D B Data Box C L P S Power/Data Sphere Page 132 Page 133 Data/Data Data/Power Power/Power

8 training training worksurface & support basics The following diagrams highlight Support and Modesty Panel options for the Training Tables Please refer to the Work Tools section for Focus Wall products and Storage section for Storage Products. (CTRT) and Cockpit (CTCK) 29" from floor to top 29" of finished worksurface Are ideally suited for classroom or training room like configurations 24" or 30" d 36" to " w Support Options Four leg styles are available for use with Training Tables 18" to 30" d All can be used on their own or in shared applications For compatibility between worksurfaces and legs, please refer to compatibility chart 36" to " w CTCK Fixed-Height Legs C-Leg T-Leg Int Leg Adjustable Height Option CTRT Standard (D) n/a Large Project Cart (AFAL) Focus Wall (A) (S) Post Leg (P) n/a n/a n/a C-Legs Casters and levelers can be specified on all legs except Intermediate Legs Modesty Panels (CTLM, CTMM) Used with most worksurfaces; see Compatibility Chart for application to the various shapes of worksurfaces Available in Laminate or Metal applied. Actual width will differ depending on the leg type Access door can be secured using a screw supplied on the modesty panel assembly Metal is available in Solid or Embossed Available with or without a built-in cable tray; the Cable Tray (CTWT) or Electrical Tray (CTET) can also be specified separately, the latter is not compatible with built-in tray When specifying the Modesty Panel, select the width to match the width of the worksurface to which it is being Laminate closed with Built-In Cable Tray without Built-In Cable Tray Metal closed Metal opened Post Leg has a mm caster C-Legs and T-Legs have a 60 mm caster Levelers have a leveling range of 1" for the Standard (D) and Legs (S) and 1/2" for the Leg (A). When casters are specified, one caster is lockable All except Standard Legs are available in an Adjustable Height version (1" increments) that includes a securing device 26" to 34" from floor to top of finished worksurface 24" to 32" from floor to top of finished worksurface with levelers with casters Also Available: Modesty Panels for Flip-Top Table (CTLMF, CTMMF) Used with Flip-Top Table (CTFT) only Available in Laminate or Metal Metal is available in Solid or Embossed Cable Tray (CTWT) or Electrical Tray (CTET) can be specified separately When specifying the Modesty Panel, select the width to match the width of the table to which it is being applied; actual width will be smaller Includes a securing device Laminate Metal A concealed roller (1 caster, 1 leveler) is offered for the Leg style. The roller option includes one leveler and one unlockable roller. This permits movement when the worksurface is lifted at one end and keeps the worksurface stationary when at rest

9 training worksurface & support basics (continued) The following diagrams highlight worksurface shapes, linking options, and Power/Data alternatives for the training tables. Please refer to the Storage section for Audience Storage products and the Work Tools section for Focus Wall products. Shapes Are provided in order to be able to plan collaborative work environments Intermediate Legs Specified only as a secondary support for specific worksurfaces May be used as a shared support to create corner configurations, but cannot be used to support a worksurface independently or to create rows of linked worksurfaces CTTA CTHM CTMZ CTCH CTQM Secondary Support Shared Support Audience A.V. Cart Focus Wall Linking Tables For permanent configurations, worksurfaces can be linked together using a shared leg For more temporary or casual applications, tables can either be casually clustered together on their own or with the use of the Quick Release Linking System (CAQR) Shared Leg Audience Credenza Quick Release Grommets or Power/Data Center Can be specified when worksurfaces or tables are ordered. The surface will come with pre-drilled holes for easy installation on site Eight options are available Additional Grommets (CTGM) or Power/Data Centers (CLMP) can be field-installed and must be specified separately The Power/Data Center provided with worksurfaces and tables has a 120" long cord Grommet on left and right (E) Power/Data Center on left (F) Grommet on left (B) Grommet in center (C) Grommet on right (D) 12 1/2" * Power/Data Center in center (G) 12 1/2" * Power/Data Center on right (H) Power/Data Sphere (CLPS) Can be field-installed to provide Power and Data access on both sides of the table in collaborative set up * 15" for Height-Adjustable Tables Data/Data Data/Power Power/Power

10 training table basics Within the training tables offering, several table options can be specified for more casual use. All Training Tables are sold as complete tables but are shipped knocked down All Training Tables can be specified with Grommets or Power/Data Centers 29" from floor to top of finished worksurface 42" to " w 24" or 30" d The worksurface of the Flip-Top Tables (CTFT) lock in both flat and upright positions. An activation handle is standard underneath the surface at the back edge and can be operated with one hand at any point along the surface. When a modesty panel (CTLMF, CTMMF) is installed, it activates the handle Modesty Panel Activation Handle This table accepts the Modesty Panel for Flip-Top Table (CTLMF, CTMMF) only. Can also accept the Electrical Tray (CTET) or Cable Tray (CTWT) at the same time as the modesty panel Can be nested together for storage. For example six tables will store into a space 53" wide Available in fixed height leg styles and options shown on the right Come with two lockable and two non-lockable casters C-Leg Standard T-Leg 36" to " w 24" or 30" d C-Leg 24" to 36" from floor to top of finished worksurface Height-Adjustable Tables (CTHT) Provide crank height adjustment from 24" to 36" Widths dimensions are 1" shorter than specified to allow for heightadjustment clearance and cable management Low-torque mechanism allows for minimal effort with only five turns per inches of adjustment. The mechanism can be operated on each side of worksurface (left or right) Available in fixed height leg styles and options shown on the right Are not offered with casters Leg is available with an optional concealed roller (1 caster/1 leveler) 1" 60" to " w 18" to 30" d C-Leg T-Leg Standard Folding Tables (CTFL) and Lightweight Folding Tables (CTLF) Are available with C-Legs or T-Legs Three fixed height (29") Leg Styles are available Standard (D), (A) and (S) Casters or Levelers can be specified on each of the leg styles Include two lockable casters when casters are specified The lightweight version comes with two integrated handles Leg is available with an optional concealed roller Do not accept accessories Mobile Table Trolley (CTMT) Available to store or move up to 7 (1,000 lbs) Folding Tables stored vertically Finished in Black

11 accessory basics The following diagrams highlight Screens, Electrical Trays and Accessories available within the Training Table offering. Table Screens (CTDS) and Lateral Screens (CTLS) Can only be applied to and Cockpit s and the Height-Adjustable Table (CTHT) Cannot be applied when T-Legs are specified Cannot be applied to 18" deep worksurfaces 22" in height cannot be used when casters have been specified Fabric is not tackable Lateral Screens must be used in combination with a Table Screen PAX90, PAX91, PAX97 and PAX98 cannot be applied to these screens Table Screen Lateral Screen 6 1/2" 10" CPU Holder CPU Holder (CTLP) Can only be installed on the Leg Style Low-profile bottom provides appropriate venting for most CPU's. However, if vents are located on the side of the CPU, 1" should be allowed on either side for sufficient air flow Cannot be applied in combination with Folding Tables (CTFL, CTLF) and Flip-Top Tables (CTFL) If Vertical Leg Covers (CTVL) are mounted on Leg Styles, the inside cover must be removed prior to mounting the CPU Holder Wire Management Hook Electrical Tray (CTET) Can be used with a Modesty Panel (without built-in cable tray) Allows for front or user access to Power and Data Several electrical components such as the Under- Plug-In Power Bar (RLPP), the Under- Power Outlet (CLWP), the Splitter Box (CLBX) or the Data Box (CLDB) can be attached directly to the electrical tray See Compatibility chart for application to the various shapes of s 12" w Cable Tray (CTWT) Can be placed on any product Is mounted below a worksurface to manage cables coming from the worksurface level Under- Plug-In Power Bar (RLPP) can be attached to the Cable Tray Vertical Wire Management Cover Vertical Wire Management Covers (CTWC) Are 15" in height and are used only on the Leg Style Vertical Leg Cover Vertical Leg Covers (CTVL) Vertical Leg Covers can only be mounted on the Leg Style Vertical Leg Covers can be mounted to both sides of an Leg Style to hide exposed cables If leg covers (CTVL) or Wire Management Covers (CTWC) are required for Folding Tables, they must be removed before folding under the worksurface When Specifying Vertical Leg Covers with cable management, only one cover gets cable management hooks

12 edge trim style overview The chart below indicates which edge trim styles can be specified with Training all Tables Tables surface surface finishes. The Flintwood Straight Trim (7) will automatically default to match the surface finish color selected. Training Table worksurfaces are 1 3/16" thick Foundation Flintwood Non-User Laminate Surface Surface Edge Straight Trim (6) n/a Straight Trim (6) All Edges Bullnose Trim (2) User Edge Only n/a Finished in a coordinating Straight Trim Flintwood Straight Trim (7) All Edges n/a Flintwood Straight Trim (7) user edge & grain direction Shading indicates user edge. * (CTRT) Cockpit (CTCK) Trapeze Angular (CTTA) Half-Moon (CTHM) Mezzanine (CTMZ) Curved Hatchet (CTCH) Quarter-Moon (CTQM) * Folding Tables (CTFL) Lightweight Folding Tables (CTLF) Flip-Top Tables (CTFT) Height-Adjustable Tables (CTHT) * Only available with Straight Trim

13 support compatibility chart The chart below shows the compatibility between worksurface shapes and supports within the Training offering. s (CTRT) Cockpit (CTCK) Trapeze Angular (CTTA) Half-Moon (CTHM) Mezzanine (CTMZ) Curved Hatchet (CTCH) Quarter- Moon (CTQM) Legs 3, , 6 3, 6 3, 6 3, 4 Post Leg (CTPL) Intermediate Leg (CTST) T-Leg (CTTL) C-Leg (CTCL) Adjustable Height Adjustable Height Adjustable Height Adjustable Height , 2 1, 2 5 1, 2 1, , 4 1 Compatible Not Compatible 1 = The Intermediate Leg may only be used when worksurfaces are linked. 2 = The Intermediate Leg may be used as a secondary non-linking support (only for 24" and 30" deep worksurfaces). 3 = Available for 24" and 30" deep worksurfaces only. 4 = The Standard Leg style cannot be installed on this worksurface. 5 = The 18" T-Leg can be used as a secondary non-linking support. 6 = The Standard Leg style can only be installed on 24" deep worksurfaces.

14 modesty panel details Training offers modesty panels mounted under the worksurface between supports to provide seated privacy. To determine compatibility between Modesty Panels and s, please refer to the Accessory Compatibility Chart in this section Modesty panels do not provide structural support Modesty Panels (CTLM, CTMM) Modesty Panels for Flip-Top Table (CTLMF, CTMMF) Securing Device Provide a 1/2" gap for cable access between the Modesty Panel and the worksurface 1/2" 1/16" Modesty Panels (CTLM, CTMM): Support configuration must be specified to ensure that the correct actual width is provided (H) for application on a Height-Adjustable Table (CTHT) only (P) for application on tables with Post Legs (S) for application on tables with C-Legs, T-Legs or Intermediate Legs Training electrical products (RLPP, CLWP, CLBX) can be installed on a Modesty Panel wider than 42" with built-in cable tray Not compatible with Flip-Top Table Modesty Panels for Flip-Top Table (CTLMF, CTMMF): The width specified must be equal to the worksurface width; actual width will be smaller 1/8" 7 1/4" Shared configuration cannot be achieved with Modesty Panels for Flip-Top Table (CTLMF, CTMMF)

15 electrical tray & cable tray details Training offers products that provide easy cable management on tables with or without modesty panel. To determine compatibility between Electrical Trays, Cable Trays and s, please refer to the Accessory Compatibility Chart in this section Electrical Tray Application Electrical Tray (CTET): Can be installed for user or back access; if a power module is installed, only back access is possible With Modesty Panel Without Modesty Panel Support configuration must be specified to ensure that the correct actual width is provided (H) for application on a Height-Adjustable Table (CTHT) and Flip-Top Table (CTFT) only (P) for application on tables with Post Legs (S) for application on tables with C-Legs, T-Legs or Intermediate Legs Electrical components such as the Under- Plug-in Power Bar (RLPP), the Under- Power Outlet (CLWP), the Splitter Box (CLBX) and the Data Box (CLDB) can be fixed directly into the electrical clips that support the tray cover User Access Back Access Cable Tray Application Cable Tray (CTWT): Value alternative to a Electrical Tray (CTET) More than one tray can be specified under the same table Only Under- Plug-in Power Bar (RLPP) can be attached directly to this product With Modesty Panel Without Modesty Panel Under- Plug- In Power Bar (RLPP) Cable Tray (CTWT)

16 accessory compatibility chart accessories * Must be used with the same worksurface width. CPU Holder (CTLP) Electrical Tray (CTET) Modesty Panels (CTLM, CTMM) Modesty Panels (CTLMF, CTMMF) Table Screens (CTDSF, CTDST, CTDSM) Lateral Screens (CTLSF, CTLST, CTLSM) Quick Release Linking System (CAQR) * Cable Tray (CTWT) worksurfaces (CTRT) 1, Cockpit (CTCK) Trapeze Angular (CTTA) Half-Moon (CTHM) Mezzanine CTMZ) Curved Hatchet (CTCH) Quarter-Moon (CTQM) tables Folding Table (CTFL) Lightweight, Folding Table (CTLF) Flip-Top Table (CTFT) 6 4 Height-Adjustable Table (CTHT) 3 Compatible Not Compatible 1= 18" deep worksurfaces are not applicable 2 = T-Legs are not applicable 3 = Applicable with Table Screen only 4 = 18" deep tables are not applicable with Post Legs 5 = 24" wide modesty panels are not compatible with Post Legs 6 = To specify the width, refer to the Modesty Panel & Electrical Tray Compatibility Chart in this section

17 lighting, electrics & communications basics Training offers several ways to organize cabling and electrics under tables and worksurfaces. All electrical products can be installed into the Electrical Tray (CTET) or lay into modesty panels with built-in cable tray (CTLM, CTMM) Power/Data Center (CLMP) Can be placed on any product Is field-installed; it is the responsibility of the installer to avoid any interference Data Box (CLDB) Under- Plug-in Power Bar (RLPP) Can be attached to the Cable Tray (CTWT) Under- Power Outlet (CLWP) Splitter Box (CLBX) Pass-Through (CLPH) Base Feed (CLBF) Data/Data Data/Power Power/Power Pass-Through (CLPH_018) Under- Power Outlet (CLWP) Pass-Through (CLPH) Under- Power Outlet (CLWP) Base Feed (CLBF) 1/2" trade size straight connector Power/Data Sphere (CLPS) Can be placed on any product Is field-installed; it is the responsibility of the installer to avoid any interference Can be used when you need access on both sides of the table in a collaborative set-up. It is its main advantage compared to Power Module (CLMP) Under- Power Outlet (CLWP) Under- Power Outlet (CLWP) When needed, two Under- Power Outlets (CLWP) can be connected together To specify the correct length of the Pass-Through, calculate the dimension from the center of the worksurface to the center of the adjacent worksurface minus 12" All worksurfaces and tables must be linked together when electrical & communication products are installed

18 finish protocol The following diagrams show the various Teknion Fabrics and Finishes available on Training Tables. Each worksurface has metal inserts to accommodate the installation of worksurface supports and modesty panels Pre-drilled holes are done to accommodate screen and Electrical Tray installation Surfaces wider than 54" include 1 or 2 reinforcing bars Straight Trims (6) and Bullnose Trims (2) are available in a variety of Edge Trim Colors. Flintwood surfaces will come with edges that match the surface color s and Table Tops Are available in Foundation Laminates and Flintwood stains Constructed of high-pressure laminate applied to a 1 1/8" thick baseboard for a total surface thickness of 1 3/16" (except for the Lightweight Folding Table CTLF) Modesty Panels Metal (CTMM) and Modesty Panels for Flip-Top Table Metal (CTMMF) Can be specified in Foundation, Accent or Mica colors Offered in Solid or Embossed Embossed is offered with four patterns: Modesty Panels Laminate (CTLM) and Modesty Panels for Flip-Top Table Laminate (CTLMF) Can be specified in Source Laminates, Foundation Laminates or Flintwood stains Hardware is available in Foundation or Mica colors Edge Trims Are offered in Bullnose Trim (2), Straight Trim (6), Flintwood Straight Trim (7) available in a selection of Edge Trim colors or Flintwood Stains (where applicable) Flintwood Straight Trim (7) is only available with Flintwood worksurfaces Edge trim will match the worksurface color Wood print edge trim finishes are not available when Bullnose Edge Trim Style is selected Square Solo (201) Louvered Solo (305) Dot Solo (401) Large Dot (402) C-Legs (CTCL), T-Legs (CTTL), Intermediate Legs (CTST), and Post Legs (CTPL) Are available in Foundation or Mica colors Levelers are Black Casters are Black with Platinum covers Corner Details Radius (R) Corner detail option is only available when Straight Trim (6) is specified Standard (S) Radius (R) Screens can be specified in Foundation, Mica or Accent metal colors, Frosted translucent, or panel fabric from Teknion s Standard Panel Fabric Program Table Screen Grommets (CTGM) Are available in Source Laminates (Wood Prints only) or Foundation and Mica color. Source Laminate Grommets should not be specified with Flintwood worksurfaces Power/Data Center (CLMP) Available in Soft Gris (B) or Ebony (E) colors Lateral Screen Fabric Metal Translucent Fabric Metal Translucent