EZIN HOBEKI Pipe Designer. Here is a little tutorial. Version 30/04/2010

Size: px
Start display at page:

Download "EZIN HOBEKI Pipe Designer. Here is a little tutorial. Version 30/04/2010"

Transcription

1 Table of content Pipe Designer Here is a little tutorial. Version 30/04/ Step by step quick start Step 1: Engine Parameters Step 2: Pipe dimensions Step 3: Shape designer Step 4: Result Viewer A9CAD quick start Open a DXF file Print a drawing Little sample Wanted shape: Sample File viewing with A9Cad Hydroforming Print the drawing...10 Illustrations table Illustration 1: Pipe Designer GUI...2 Illustration 2: Pipe skeleton GUI...5 Illustration 3: Shape "Save as" dialog...5 Illustration 4: CAD file "Save as" dialog...6 Illustration 5: A9Cad editor path finder dialog...6 Illustration 6: Cad file of the pipe...7 Illustration 7: Hydroforming...8 Illustration 8: Hydroforming pipe...9 Illustration 9: Pipe CAD and Hydroforming comparison...9 Illustration 10: Print part 1 on A4 paper...10 Illustration 11: Print part 2 on A4 paper...11 Illustration 12: Print part 3 on A4 paper...11 Illustration 13: Print part 4 on A4 paper...12 Pipe Designer 1.2 How To 1/12

2 1 Step by step quick start 1.1 Step 1: Engine Parameters fill the input zone with the engine parameters & rpm... go to step 2 (A) if you know the pipe dimensions (lengths+diameters) go to step 2 (B) 1.2 Step 2: Pipe dimensions (A) : click on "Compute Pipe" to calculate the pipe dimensions -> lengths+diameters are updated in the lower part of the GUI (Graphic User Interface) -> go to step 3 (B) : click on "Manual Pipe" and fill the pipe dimensions in the GUI and click "OK" -> lengths+diameters are updated in the lower part of the GUI -> go to step Step 3: Shape designer Illustration 1: Pipe Designer GUI click on "Pipe Designer" and define the shape of the pipe (neutral fiber or center line) : Pipe Designer 1.2 How To 2/12

3 use the 9 arcs to define the shape (radius+angle / if angle is 0 then shape is straight with a length equal to radius) L exp. (experimental length) should turn to GREEN before you click on "OK" a GUI "save as" window appears and asks to save the pipe parameters (shape) in a text file (txt file extension) browse your hard disk for the directory to be used (create a new directory if needed) select a TXT file or use a new file name click "OK" a GUI "save as" window appears and asks to save the pipe drawing in a CAD file (dxf file extension) browse your hard disk for the directory to be used (create a new directory if needed) select a DXF file or use a new file name click "OK" go to step 4 to view the CAD file 1.4 Step 4: Result Viewer click on "CAD viewer" to select or open the CAD viewer (if already selected) a GUI "open" window appears and asks to select the viewer executable file (exe file extension) browse your hard disk for the directory where exe file is for A9CAD usually : c:\program files\a9tech\ select the exe file (A9cad.exe) click "OK" the CAD viewer opens and open the file stored in step 3 2 A9CAD quick start 2.1 Open a DXF file Menu "File" choose "Open..." (or icon on the tool bar) a GUI "open" window appears and asks to select the CAD file change the file extension from DWG to DXF browse and select the DXF file stored at step 3 and click "Open" to view the full drawing click on menu "View" choose "Zoom" then "All" (or icon on the tool bar) drawing appears 2.2 Print a drawing Menu File chose Print preview Orientation Select Portrait or Landscape Scale Uncheck the Scaled to fit Set the Drawing Units to 1.0mm Printer Units must be to 1.0mm too Print Area Check Windows button and click choose Pipe Designer 1.2 How To 3/12

4 Select an area to be printed (make sure that all the printer areas overlap). 3 Little sample In order to model the pipe shape (not the pipe dimensions which are driven by the engine spec), use the 9 segments or arcs (0 -> 8). 3.1 Wanted shape: first part of the shape should be a straight line of 100mm => Arc 0 is set to radius = 100mm / angle = 0 second part of the shape should be a bent angle 80 & radius 200mm => Arc 1 is set to radius = 200mm / angle = 80 then straight pipe.(and so on till the arc 8...) 3.2 Sample For the default values of engine spec., click "Compute Pipe" and then "Pipe Designer" the "Pipe skeleton" GUI appears (figure 2). Then one easy way is to set : arc 8 to stinger length (L67 = 217mm) => radius = L67 / angle = 0 arc 7 to baffle cone length (L56 = 217) => radius = L56 / angle = 0 arc 0 to radius = 100 / angle = 0 arc 1 to radius = 200 / angle = 80 arc 2 to radius = 57 / angle = 0 arc 3 to radius = 50 / angle = 0 arc 4 to radius = 50 / angle = 0 arc 5 to radius = 50 / angle = 0 arc 6 to radius = 50 / angle = 0 Pipe Designer 1.2 How To 4/12

5 Illustration 2: Pipe skeleton GUI This leads to an experimental length of mm close to the expected one mm so experimental length has turn to green. Click on "OK". The "Save as" dialog appears to save the shape of the pipe (figure 3) and another "Save as" dialog appears to save the CAD file (figure 4). Illustration 3: Shape "Save as" dialog Pipe Designer 1.2 How To 5/12

6 Illustration 4: CAD file "Save as" dialog 3.3 File viewing with A9Cad When "Open CAD viewer" (figure 1) is clicked for the first time, the path dialog appears (figure 5) and then the CAD software is launched. Figure 7 shows a view in A9Cad of the pipe after the "Zoom All" button has been clicked and you could print it to real scale. Illustration 5: A9Cad editor path finder dialog Pipe Designer 1.2 How To 6/12

7 3.4 Hydroforming To make the hydroforming pipe CAD file, two options are available : full drawing (with green lines), for CNC cutting (without green lines). Illustration 6: Cad file of the pipe To activate the CNC option, check the "Cut" button. Click the "DXF Hydroforming" button to create the DXF file (figure 7). A Save as dialog appears (like in figure 4) to allow the file to be saved. Open A9Cad to view the result like in figure 8. The figure 9 shows the differences between the pipe and the hydroforming metal sheet to be cutted. Pipe Designer 1.2 How To 7/12

8 Illustration 7: Hydroforming Pipe Designer 1.2 How To 8/12

9 Illustration 8: Hydroforming pipe Illustration 9: Pipe CAD and Hydroforming comparison Pipe Designer 1.2 How To 9/12

10 3.5 Print the drawing Choose the best orientation : Portrait for part 1. Select the right scale Select the B&W or color pen assignments Select the area to be printed : in this sample window is chosen. Make sure that the printed area are overlapping when chosen. Illustration 10: Print part 1 on A4 paper Pipe Designer 1.2 How To 10/12

11 Illustration 11: Print part 2 on A4 paper Illustration 12: Print part 3 on A4 paper Pipe Designer 1.2 How To 11/12

12 Illustration 13: Print part 4 on A4 paper Pipe Designer 1.2 How To 12/12

minicad5 QuickStart Tutorial Stage: 4 Plot the Job

minicad5 QuickStart Tutorial Stage: 4 Plot the Job minicad5 QuickStart Tutorial Stage: 4 Plot the Job Aim: Plot the job to both printer / plotter and DXF file. Figure 1 - The finished product Plotting and export to DXF We wish to produce a final paper

More information

Deck Tutorial. Chapter 6: Decks and Porches

Deck Tutorial. Chapter 6: Decks and Porches Chapter 6: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to

More information

How to create beautiful B&W images with Adobe Photoshop Elements 12

How to create beautiful B&W images with Adobe Photoshop Elements 12 How to create beautiful B&W images with Adobe Photoshop Elements 12 Whether it s an Instagram snap or a film portrait, black and white photography is never out of style. Today, there are a number of ways

More information

Deck Tutorial. Chapter 8: Decks and Porches

Deck Tutorial. Chapter 8: Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to

More information

Import/Export of tendons in module StatiCa Tendon

Import/Export of tendons in module StatiCa Tendon IDEA Tutorial Import/Export of tendons in module StatiCa Tendon by using formats DXF, TXT and table format Import/Export of tendons in module StatiCa Tendon 1 Contents 1. Terminology... 2 2. Import...

More information

You can easily print images using the Capture NX print function. Here we will explain the process for printing

You can easily print images using the Capture NX print function. Here we will explain the process for printing Printing - Print Size Request How do you print images to fit on particular paper sizes. Response You can easily print images using the Capture NX print function. Here we will explain the process for printing

More information

Creating a 2D Drawing in Paper Space

Creating a 2D Drawing in Paper Space C h a p t e r 16 Creating a 2D Drawing in Paper Space In this chapter, we will learn the following to World Class standards: 1. Converting 3D Solids to 2D Orthographic Views 2. Open the Solid Part Drawing

More information

Drawing Layouts Paper space & Model Space

Drawing Layouts Paper space & Model Space Drawing Layouts Paper space & Model Space Users of Bricscad will have seen the tabs at the bottom left of the drawings area labelled: Model, Layout1, Layout2 but may not know how to use them or what they

More information

Deck Tutorial. Decks and Porches. Drawing Decks

Deck Tutorial. Decks and Porches. Drawing Decks Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.

More information

Ansoft Designer Tutorial ECE 584 October, 2004

Ansoft Designer Tutorial ECE 584 October, 2004 Ansoft Designer Tutorial ECE 584 October, 2004 This tutorial will serve as an introduction to the Ansoft Designer Microwave CAD package by stepping through a simple design problem. Please note that there

More information

Deck Tutorial. Decks and Porches. Drawing Decks

Deck Tutorial. Decks and Porches. Drawing Decks Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.

More information

AutoCAD Line Types If AutoCAD linetypes are disabled during configuration, Slick! will only plot/print straight lines!

AutoCAD Line Types If AutoCAD linetypes are disabled during configuration, Slick! will only plot/print straight lines! Print / Plot To print the contents of the graphics window, select File? Print/Plot from the menu bar. Slick! can print or plot directly to the Windows printer or plotter. In this discussion, the term printing

More information

Deck Tutorial. Chapter 8: Decks and Porches

Deck Tutorial. Chapter 8: Decks and Porches Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase.

More information

Stratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS

Stratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Boreholes and Cross Sections Become familiar with boreholes and borehole cross sections in GMS Objectives Learn how to import borehole data, construct a

More information

by Jonathan Pickup fourth edition written with version 2013 Vectorworks Landmark Tutorial Manual SAMPLE

by Jonathan Pickup fourth edition written with version 2013 Vectorworks Landmark Tutorial Manual SAMPLE kramdnal by Jonathan Pickup fourth edition written with version 2013 Vectorworks Landmark Tutorial Manual Table of Contents Introduction... iii Project 1: Landscape Area Analysis...1 Project 2: Quick Domestic

More information

Submittals Quick Reference Guide

Submittals Quick Reference Guide This topic provides a reference for the Project Center Submittals activity center. Purpose The Submittals activity center in Newforma Contract Management enables you to effectively log submittals and track

More information

Stratigraphy Modeling Boreholes and Cross Sections

Stratigraphy Modeling Boreholes and Cross Sections GMS TUTORIALS Stratigraphy Modeling Boreholes and Cross Sections The Borehole module of GMS can be used to visualize boreholes created from drilling logs. Also three-dimensional cross sections between

More information

Tutorial 1 getting started with the CNCSimulator Pro

Tutorial 1 getting started with the CNCSimulator Pro CNCSimulator Blog Tutorial 1 getting started with the CNCSimulator Pro Made for Version 1.0.6.5 or later. The purpose of this tutorial is to learn the basic concepts of how to use the CNCSimulator Pro

More information

How to use free DWG TrueView to work with AEC Apps

How to use free DWG TrueView to work with AEC Apps AEC Logic Pvt Ltd How to use free DWG TrueView to work with AEC Apps This document explains how to reach free download from Autodesk website and manage various 2D and 3D objects while converting FROM and

More information

Landscaping Tutorial

Landscaping Tutorial Landscaping Tutorial This tutorial describes how to use Home Designer Essentials s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features,

More information

Creating DXF Files For The Waterjet

Creating DXF Files For The Waterjet Creating DXF Files For The Waterjet 2D CAD Files For Your Gear Pumps By Martin L. Culpepper CONTENTS: I. Introduction...... 2 II. Software For Creating DXF Files....... 2 III. What Is Required.... 2 IV.

More information

Getting Started. Before You Begin, make sure you customized the following settings:

Getting Started. Before You Begin, make sure you customized the following settings: Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides

More information

uiulearn TUTORIAL INTEGRATIONS> HOW TO USE PANOPTO (STUDENT)

uiulearn TUTORIAL INTEGRATIONS> HOW TO USE PANOPTO (STUDENT) uiulearn TUTORIAL INTEGRATIONS> HOW TO USE PANOPTO (STUDENT) This tutorial covers how to record a Panopto video for your course. IN ORDER TO DO THIS, YOUR INSTRUCTOR MUST COMPLETE SEVERAL STEPS TO ALLOW

More information

Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS feature objects.

Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS feature objects. v. 10.1 GMS 10.1 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS

More information

POWER DEMAND FOR MULTIPLE ZONES

POWER DEMAND FOR MULTIPLE ZONES IDA Indoor Climate and Energy Basic Course POWER DEMAND FOR MULTIPLE ZONES Guide Copyright EQUA Simulation AB February 2018 Purpose This is the second part of the IDA ICE basic course 1. You learn how

More information

SMART 3 IN 1 HOLLYWOOD PHOTOS: SETTING UP YOUR BOOTH FOR WEDDING/EVENT MODE

SMART 3 IN 1 HOLLYWOOD PHOTOS: SETTING UP YOUR BOOTH FOR WEDDING/EVENT MODE SMART 3 IN 1 HOLLYWOOD PHOTOS: SETTING UP YOUR BOOTH FOR WEDDING/EVENT MODE Start the Hollywood Photo Booth program. Rightclick anywhere on the screen and choose Setup. Click Next until you get to Screen

More information

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored

More information

Example Application C H A P T E R 4. Contents

Example Application C H A P T E R 4. Contents C H A P T E R 4 Example Application This chapter provides an example application of how to perform steady flow water surface profile calculations with HEC-RAS. The user is taken through a step-by-step

More information

Getting Started Guide

Getting Started Guide SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.

More information

Objectives Learn how to import and display shapefiles in GMS. Learn how to convert the shapefiles to GMS feature objects. Required Components

Objectives Learn how to import and display shapefiles in GMS. Learn how to convert the shapefiles to GMS feature objects. Required Components v. 10.3 GMS 10.3 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles in GMS. Learn how to convert the shapefiles to GMS feature objects. Prerequisite

More information

Tutorial 3: Drawing Objects in AutoCAD 2011

Tutorial 3: Drawing Objects in AutoCAD 2011 Tutorial 3: Drawing Objects in AutoCAD 2011 Audience: Users new to AutoCAD Prerequisites: None Time to complete: 15 minutes In This Tutorial Please complete the lessons in this tutorial in order. The earlier

More information

CADPIPE Industrial Pipe. Tutorial

CADPIPE Industrial Pipe. Tutorial CADPIPE Industrial Pipe Tutorial Introduction This Tutorial is a brief introduction to the power of CADPIPE 3D DESIGN. We will show you a few key features and the general procedures for creating 3D piping

More information

Creating DXF Files. IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger

Creating DXF Files. IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger Creating DXF Files IDeAte Laser Micro Part 1c Dave Touretzky and Susan Finger 1. Convert a part to a dxf format When you save a part in Solidworks it is saved as a 3D solid model with all the relationships

More information

AEC LOGIC Pvt Ltd. AEC CutFill. Step by Step Tutorial. Yudhishtirudu Gaddipati

AEC LOGIC Pvt Ltd. AEC CutFill. Step by Step Tutorial. Yudhishtirudu Gaddipati AEC LOGIC Pvt Ltd AEC CutFill Step by Step Tutorial Yudhishtirudu Gaddipati 13 AEC CutFill-Step by Step Tutorial AEC CutFill Program AEC CutFill is a simple way to calculate earthwork volumes and print

More information

Getting Started. with Easy Blue Print

Getting Started. with Easy Blue Print Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the

More information

Making Standard Note Blocks and Placing the Bracket in a Drawing Border

Making Standard Note Blocks and Placing the Bracket in a Drawing Border C h a p t e r 12 Making Standard Note Blocks and Placing the Bracket in a Drawing Border In this chapter, you will learn the following to World Class standards: Making standard mechanical notes Using the

More information

Introduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor. 1 Introduction. For Quartus II 13.1

Introduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor. 1 Introduction. For Quartus II 13.1 Introduction to Simulation of Verilog Designs Using ModelSim Graphical Waveform Editor For Quartus II 13.1 1 Introduction This tutorial provides an introduction to simulation of logic circuits using the

More information

Plotting from Start to Finish With AutoCAD 2004

Plotting from Start to Finish With AutoCAD 2004 December 2-5, 2003 MGM Grand Hotel Las Vegas Plotting from Start to Finish With AutoCAD 2004 Speaker: J.C. Malitzke Assistant: David Harrington Assistant: Shaan Hurley Driver: Craig Black Code: GD11-1L

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008 1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical

More information

USB cable. Xviewer. Text Real data file (*.txt)

USB cable. Xviewer. Text Real data file (*.txt) User s Manual FG410/FG420 Transferring and Outputting DLM/DL/SL Series Waveform Data 1 Introduction This manual describes how to transfer waveform data acquired with an DLM/DL/SL series instrument to the

More information

GIS Module GMS 7.0 TUTORIALS. 1 Introduction. 1.1 Contents

GIS Module GMS 7.0 TUTORIALS. 1 Introduction. 1.1 Contents GMS 7.0 TUTORIALS 1 Introduction The GIS module can be used to display data from a GIS database directly in GMS without having to convert that data to GMS data types. Native GMS data such as grids and

More information

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan Landscaping Tutorial This tutorial describes how to use Home Designer Pro s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features, and how

More information

The original image. The final rainbow effect.

The original image. The final rainbow effect. ADD A realistic rainbow to a photo In this Photoshop photo effects tutorial, we re going to learn how to easily add a rainbow, even a double rainbow, to a photo. Of course, as with most photo effects,

More information

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax: Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

v. 8.0 GMS 8.0 Tutorial GIS Module Shapefile import, display, and conversion Prerequisite Tutorials None Time minutes

v. 8.0 GMS 8.0 Tutorial GIS Module Shapefile import, display, and conversion Prerequisite Tutorials None Time minutes v. 8.0 GMS 8.0 Tutorial Shapefile import, display, and conversion Objectives Learn how to import and display shapefiles with and without ArcObjects. Convert the shapefiles to GMS feature objects. Prerequisite

More information

NEORSD. Cad Standards and Procedures Manual

NEORSD. Cad Standards and Procedures Manual NEORSD Cad Standards and Procedures Manual This Manual is being provided to you on loan from the NEOSRD and is the property of the NEOSRD. Periodic updates will be provided and you are responsible for

More information

Toothbrush Holder Project 2D Machining

Toothbrush Holder Project 2D Machining Toothbrush Holder Project 2D Machining Prerequisite Toothbrush Holder drawn and saved as a DXF file in SolidWorks Focus of the Lesson On completion of this exercise you will have: Used the Techsoft 2D

More information

Using Siemens NX 11 Software. The connecting rod

Using Siemens NX 11 Software. The connecting rod Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

COLORIZE A PHOTO WITH MULTIPLE COLORS

COLORIZE A PHOTO WITH MULTIPLE COLORS COLORIZE A PHOTO WITH MULTIPLE COLORS In this Photoshop photo effects tutorial, we re going to learn how to colorize a photo using multiple colors. It s an effect I ve seen used quite a bit in ads for

More information

Quick Start for Autodesk Inventor

Quick Start for Autodesk Inventor Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow

More information

Colorizing A Photo With Multiple Colors In Photoshop

Colorizing A Photo With Multiple Colors In Photoshop Colorizing A Photo With Multiple Colors In Photoshop Written by Steve Patterson. In this Photoshop Effects tutorial, we re going to learn how to colorize a photo using multiple colors. It s an effect I

More information

The original image. Let s get started! The final rainbow effect. The photo sits on the Background layer in the Layers panel.

The original image. Let s get started! The final rainbow effect. The photo sits on the Background layer in the Layers panel. Add A Realistic Rainbow To A Photo In this Photoshop photo effects tutorial, we ll learn how to easily add a rainbow, and even a double rainbow, to a photo! As we ll see, Photoshop ships with a ready-made

More information

RPG CREATOR QUICKSTART

RPG CREATOR QUICKSTART INTRODUCTION RPG CREATOR QUICKSTART So you've downloaded the program, opened it up, and are seeing the Engine for the first time. RPG Creator is not hard to use, but at first glance, there is so much to

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Generative Drafting Overview What's New Getting Started User Tasks

Generative Drafting Overview What's New Getting Started User Tasks Generative Drafting Overview Conventions What's New Getting Started Defining the Drawing Sheet Part Drawing Opening a Part Creating a Front View Creating a Projection View Creating a Section View Creating

More information

Estimated Time Required to Complete: 45 minutes

Estimated Time Required to Complete: 45 minutes Estimated Time Required to Complete: 45 minutes This is the first in a series of incremental skill building exercises which explore sheet metal punch ifeatures. Subsequent exercises will address: placing

More information

Unit. Drawing Accurately OVERVIEW OBJECTIVES INTRODUCTION 8-1

Unit. Drawing Accurately OVERVIEW OBJECTIVES INTRODUCTION 8-1 8-1 Unit 8 Drawing Accurately OVERVIEW When you attempt to pick points on the screen, you may have difficulty locating an exact position without some type of help. Typing the point coordinates is one method.

More information

When you complete this assignment you will:

When you complete this assignment you will: Objjectiives When you complete this assignment you will: 1. create an engineering drawing file using the management file menu. 2. dimension the engineering file using the drawing annotation menu. 3. produce

More information

Select your Image in Bridge. Make sure you are opening the RAW version of your image file!

Select your Image in Bridge. Make sure you are opening the RAW version of your image file! CO 3403: Photographic Communication Steps for Non-Destructive Image Adjustments in Photoshop Use the application Bridge to preview your images and open your files with Camera Raw Review the information

More information

for Solidworks TRAINING GUIDE LESSON-9-CAD

for Solidworks TRAINING GUIDE LESSON-9-CAD for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working

More information

Table of Contents. Lesson 1 Getting Started

Table of Contents. Lesson 1 Getting Started NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

Output a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout.

Output a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout. Printing Output a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout. Originally, people printed text from printers and plotted drawings from plotters.

More information

Stacked Blocks Tutorial

Stacked Blocks Tutorial For ME 577 Written by Michael Tonks 2 TABLE OF CONTENTS 1. Analysis Preparation... 3 START UP PROGRAMS:... 3 OPEN STACKED BLOCKS ASSEMBLY:... 3 2. Parametric Tolerance Analysis... 3 DEFINE DESIGN SPECIFICATION:...

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

Landscaping Tutorial

Landscaping Tutorial Landscaping Tutorial This tutorial describes how to use Home Designer Architectural s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features,

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When we are finished, we will have created

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

Optika ISview. Image acquisition and processing software. Instruction Manual

Optika ISview. Image acquisition and processing software. Instruction Manual Optika ISview Image acquisition and processing software Instruction Manual Key to the Instruction Manual IS is shortened name used for OptikaISview Square brackets are used to indicate items such as menu

More information

Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece

Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece

More information

Principles and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready

Principles and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready Principles and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready Part I. Introduction AutoCAD is a computer drawing package that can allow you to define physical structures

More information

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics

Section 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Section 1 Introduction and Review Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Drawing Assignments: NCAA Basketball Court Plot Style Table (Check-off)

More information

How to Create and use Manual Linearization Profiles in Matan PhotoPrint Server

How to Create and use Manual Linearization Profiles in Matan PhotoPrint Server 1 Application Note: #011 Date: Nov. 03, 05 Written By: Eitan Abramovich Approved by: Shay Rosenzweig How to Create and use Manual Linearization Profiles in Matan PhotoPrint Server Introduction When printing

More information

Introduction to Simulation of Verilog Designs. 1 Introduction. For Quartus II 13.0

Introduction to Simulation of Verilog Designs. 1 Introduction. For Quartus II 13.0 Introduction to Simulation of Verilog Designs For Quartus II 13.0 1 Introduction An effective way of determining the correctness of a logic circuit is to simulate its behavior. This tutorial provides an

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Chapter 10 Exercise 1 1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso.dwt. 3. Construct

More information

File Project Data File1.TXT contains Data for creating PLAN drawing of a road section by reading Model & String from the Model files,

File Project Data File1.TXT contains Data for creating PLAN drawing of a road section by reading Model & String from the Model files, ================================== HEADS Pro Release 14.1, User s Guide for Tutorial Data Tutorial 12B PLAN Drawings : Base Plan DXF ================================== Process: The folder Tutorial 12B

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

The assembly is comprised of two components and these must be prepared first

The assembly is comprised of two components and these must be prepared first Tutorial Edge Assembly Detail Introduction Most users will be familiar with the process of extracting quantities for flashing materials using the regular flashing command, ie standard profiles such as

More information

verticals products support services training community corporate Saving DGN to DWG (with AutoCAD paperspace and viewport compatibility)

verticals products support services training community corporate Saving DGN to DWG (with AutoCAD paperspace and viewport compatibility) Page 1 of 6 Login Site Map Print Store Search Select Locale Quick Links verticals products support services training community corporate Support Support Tools KnowledgeBase TechNotes and FAQs Remote Support

More information

Zooming in on Architectural Desktop Layouts Alexander L. Wood

Zooming in on Architectural Desktop Layouts Alexander L. Wood December 2-5, 2003 MGM Grand Hotel Las Vegas Alexander L. Wood Code BD41-3L Take advantage of both AutoCAD and Autodesk Architectural Desktop Layout features. We'll look at the basics of setting up AutoCAD

More information

Landscaping Tutorial. Chapter 5:

Landscaping Tutorial. Chapter 5: Chapter 5: Landscaping Tutorial This tutorial was written to help you learn how to use Home Designer Landscape and Deck s Terrain tools. In this tutorial, you will learn how to add elevation information

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

PHOTOSHOP PUZZLE EFFECT

PHOTOSHOP PUZZLE EFFECT PHOTOSHOP PUZZLE EFFECT In this Photoshop tutorial, we re going to look at how to easily create a puzzle effect, allowing us to turn any photo into a jigsaw puzzle! Or at least, we ll be creating the illusion

More information

VisualCAM 2018 TURN Quick Start MecSoft Corporation

VisualCAM 2018 TURN Quick Start MecSoft Corporation 2 Table of Contents About this Guide 4 1 About... the TURN Module 4 2 Using this... Guide 4 3 Useful... Tips 5 Getting Ready 7 1 Running... VisualCAM 2018 7 2 About... the VisualCAD Display 7 3 Launch...

More information

The Basic RAW Image Processing Workflow In PSE 2018

The Basic RAW Image Processing Workflow In PSE 2018 The Basic RAW Image Processing Workflow In PSE 2018 This tutorial will illustrate the basic workflow or steps that are generally done when a RAW image is edited in PSE 2018. Saving the edited file as part

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

CAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block

CAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details

More information

Revit Structure 2013 Basics

Revit Structure 2013 Basics Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

More information

Adobe Photoshop CS5 Tutorial

Adobe Photoshop CS5 Tutorial Adobe Photoshop CS5 Tutorial GETTING STARTED Adobe Photoshop CS5 is a popular image editing software that provides a work environment consistent with Adobe Illustrator, Adobe InDesign, Adobe Photoshop

More information

Section Table of Contents: Section 16.0

Section Table of Contents: Section 16.0 Section 16.0 Table of Contents: Section 16.0 Overview - Section 16.0... 16.0-3 Plotting Single Sheets... 16.0-3 Publishing... 16.0-5 Creating DWFs or PDFs (with Sheet Sets)... 16.0-6 Overview - Section

More information

1. Setup Output mode. 2. Using a Fixed tile size

1. Setup Output mode. 2. Using a Fixed tile size Tutorial Tiling Software version: Asanti 2.0 Document version: June 23, 2015 This tutorial demonstrates how to use tiling with Asanti. Tiling can only be executed on a system where Acrobat Pro X or later

More information

In the past year or so, just about everyone I know has gone out and purchased

In the past year or so, just about everyone I know has gone out and purchased In This Chapter Having some fun with your digital camera Getting out and shooting Chapter 1 Jumping Right In Transferring images from your camera to your computer Opening images in Photoshop Printing and

More information

Image resizing with Microsoft Office Picture Manager

Image resizing with Microsoft Office Picture Manager Marketing Services and Web Management Digital Marketing Image resizing with Microsoft Office Picture Manager Document Owner Adam Seeley Last update Monday, 3 February 2014 Status Final Version 2.0 Circulation

More information

Chief Architect Home Designer Professional User s Guide

Chief Architect Home Designer Professional User s Guide Chief Architect Home Designer Professional 2019 User s Guide Chief Architect, Inc. 6500 N. Mineral Dr. Coeur d Alene, Idaho 83815 HomeDesignerSoftware.com 1990 2018 by Chief Architect, Inc. All rights

More information

Quick Start Guide for Creo Parametric 2.0

Quick Start Guide for Creo Parametric 2.0 Quick Start Guide for Creo Parametric 2.0 W. Durfee, September 2012 Introduction This is a quick start guide for the Creo Parametric CAD application from Parametric Technologies (PTC) 1. The Quick Start

More information

Reference Project. Chapter

Reference Project. Chapter Chapter 1 Reference Project For many companies, the default standard may not be sufficient. It is a good base for starting a drawing, but there are always specific company symbols and settings that require

More information