CHAMPION DUCT CSA listed CHAMPION HANGERS FLAME SHIELD FLAME SHIELD NFPA 130 CHAMPION HAZ DUCT Class I Div 2 National Electrical Code
|
|
- Trevor Lang
- 6 years ago
- Views:
Transcription
1
2 Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, strut and bridge hangers for the electrical and mechanical markets. Our headquarters and manufacturing are located in Spring, Texas. Champion Fiberglass, began production of epoxy fiberglass conduit and fittings in 9. The company has the most advanced production facilities for manufacturing fiberglass conduit in North America. A well-trained and highly efficient work force utilize proprietary processes along with high-speed winding equipment and high temperature curing ovens to ensure consistent quality in their production standards. In 99, Champion Fiberglass, developed the first conduit from epoxy resins that had flame resistance and low smoke charac ter is tics, meeting the most stringent codes and specifications. Today this conduit system has been integrated into the CHAMPION DUCT system and is UL and CSA listed for both below and above ground use. In that same year, Champion Fiberglass also began to manufacture their own brand of hangers, called CHAMPION HANGERS. All of the horizontal components are made of fiberglass and the threaded rods of steel are sleeved with fiberglass tubing. This provides optimal performance when supporting fiberglass and PVC conduit. Another milestone evolved in 00 when Champion Fiberglass completed development of a Phenolic Conduit System, FLAME SHIELD. It is now the number one choice conduit for subways, including tunnels and stations. FLAME SHIELD conforms to NFPA requirements, including the 0 edition. In 00, CHAMPION HAZ DUCT (XW Type fiberglass conduit) was allowed for use in Class I Div installations, per the National Electrical Code (NEC). This was accomplished by Champion Fiberglass after having worked with UL and NEC on this issue for many years. Champion Fiberglass is a ISO 900:00 Certified Company. We offer our customers innovative solutions with the highest quality products and customer service available in our industry.
3 CONTENTS Installation & Supports Introduction to Champion Hangers Intermediate Hangers - Standard & Alternate Configurations.... Engineering / Deflection Graphs Champion Bridge Hangers / Intermediate Type Tables Limited Warranty Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- HANGERS Steel Hardware Specifications CHAMPION Specifications for Fiberglass Hangers Anchor Hangers
4 INSTALLATION & SUPPORTS LOCATION OF SUPPORTS The actual location of supports are determined by two factors:. What the National Electrical Code (NEC) allows.. If not guided by NEC, see the Deflection Graphs in this catalog for determination of support distances. All of the graphs are shown for five () different mid-span locations. After determining the total weight of the cable, the support span distance is determined based on maximum allowable mid-span deflection. A rule of thumb is that the mid-span deflection should not exceed " (mm). If PVC conduit or any other material is used, please consult NEC and the manufacturers guidelines. Located at / point INSTALLATION OF EXPANSION JOINTS Located at / point If the fiberglass conduit is subject to expansion and contraction due to changes in the ambient temperature, Champion Fiberglass, Inc. suggests the following guidelines for installing expansion joints: Conduit Length Less Than 0 ft. ( m) No Expansion Joint Needed. If conduit length is between 0 ft. ( m) up to 00 ft. ( m), install one expansion joint mid-way. If conduit length is over 00 ft. ( m), install one expansion joint every 00 ft. ( m) apart. When commencing, install the first expansion joint 0 ft. (0 m) maximum from each abutment, and then space the expansion joints equally every 00 ft. ( m) maximum). Expansion joints should preferably be placed at ¼ point away from any hanger. This is the point where the load is at minimum and will therefore allow for smooth operation. (See Illustration above) NEC 0, Article. Table of Expansion Characteristics for Reinforced Thermosetting Resin Conduit (RTRC) Coefficient of Thermal Expansion =. x - in/in/ F (.7 x - mm/mm/ C) Temperature Change ( F) Length Change of RTRC Conduit (in/0 ft) Temperature Change ( F) Length Change of RTRC Conduit (in/0 ft) Temperature Change ( C) Length Change of RTRC Conduit (mm/m) / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
5 CHAMPION HANGERS Champion Hangers are offered in two main types and per your project specifications: Intermediate Hanger, the most widely used type Anchor Hanger, an intermediate hanger with side bracing Note: Steel hangers shall never be used in combination with fiberglass conduit. Champion Fiberglass offers an order process for submitting your bridge hanger project specifications. You can calculate basic hanger dimensions for various diameters of conduit and various configurations up to High x Wide. These easy to use, Intermediate and Anchor Hanger PDF quotation forms, can be downloaded from our web site: We can also go through the order process with you directly. Contact your Champion Sales Representative to schedule assistance with our experienced inside sales staff. INTERMEDIATE HANGER This is the most widely used type of hanger for support under bridges. It is a trapeze hanging system, using threaded rods that are attached to the bridge. The horizontal components are fiberglass flatbars, " wide x ½" ( mm x mm) thick, and the threaded rods are sleeved over using " ( mm) fiberglass pultruded pipe, in order not to abrade the conduit. An example of a High x Wide - Flat Bar / Round Tube, Intermediate Bridge Hanger order form is shown below. Quality Fiberglass Products for the Electrical Industry Customer Information: Project name: Contact name: Company: Distributor Contractor Engineer other: Phone: Fax: E Intermediate Bridge Hanger High x Wide INTRODUCTION TO CHAMPION HANGERS F Show A & B Dimension Guide Quantity: A G A A ¾" Copyright Champion Fiberglass B H B B /" - Hardware /" x " FRP Flat Bar " FRP Round Tube B C D E F G H.000 *See note below Hot Dipped Galvanized Steel Stainless Steel 0 Stainless Steel other: ¾" C C C ½" *The F dimension will default to a value of unless you change it manually. D Customer Confirmation: Yes no Date: Signature: Send Form Clear Form Fax info@championfiberglass.com 00 Spring Stuebner Rd. Spring, Texas 779 IBH Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- CHAMPION HANGERS /
6 INTERMEDIATE HANGER STANDARD & ALTERNATE CONFIGURATIONS INTERMEDIATE HANGER - STANDARD & ALTERNATE CONFIGURATIONS Champion Fiberglass Hangers are offered in standard and alternate configurations. All of the components that can come in contact with the fiberglass conduit are made from fiberglass. Standard and alternate components used for a Champion Hanger include combinations of the following: ½" Thick x " wide fiberglass flatbar (horizontal crossmember). An alternate: the flatbar is substituted for " x " x ¼" fiberglass square tubing for increased strength. ¾ Hot dipped galvanized threaded rod (for trapeze hanging) with necessary hardware. An alternate: stainless steel threaded rod is used instead, where chlorine (incl. salt) may be present. " fiberglass tubing, sleeved on the outside of the threaded rod INTERMEDIATE HANGER / FLAT BAR-SQUARE TUBING-FLAT INTERMEDIATE HANGER / FLAT BAR-SQUARE TUBING /" - Hardware /" x " FRP Flat Bar " FRP Round Tube /" x " FRP Square Tube /" - Hardware /" x " FRP Flat Bar " FRP Round Tube /" x " FRP Square Tubing STANDARD INTERMEDIATE HANGER INTERMEDIATE HANGER / FLAT BAR-SQUARE TUBE BOTTOM BASE MOUNT HANGER /" - Hardware /" x " FRP Flat Bar " FRP Round Tube /" - Hardware /" x " FRP Flat Bar " FRP Round Tube /" x " FRP Square Tubing /" x " FRP Flat Bar " FRP Round Tube /" - Hardware Supplied by other / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
7 ANCHOR HANGERS Wherever split anchor rings are used around a hanger, this hanger needs to be braced and is often referred to as an anchor hanger. It has the same construction as an intermediate hanger, except that the bottom horizontal crossmember is." ( mm) longer on each side. From this extended crossmember, bracing members are attached. The bracing can be an adjustable brace using threaded rods or a fixed brace using angle iron. In some instances, hangers are not supported from the bridge, but instead standing on top of I-beams. For such instances, the support rods are shorter and instead extended downwards for attachment to an I-beam. Standard Bridge Hanger Install every ' appr. Anchor Hanger w/adjustable Bracket Expansion Joint Located at / point Split Anchor Rings (both sides of hanger) The form below shows an example of a High x Wide - Flat Bar / Round Tube, Champion Anchor Hanger. This and other easy to use, Anchor Hanger PDF quotation forms, can be downloaded from our web site. Copyright Champion Fiberglass
8 SPECIFICATIONS FOR FIBERGLASS HANGERS SPECIFICATIONS FOR FIBERGLASS HANGERS This specification details the requirements for hangers (suspension supports) used to support fiberglass conduit from bridge structures. The hangers shall be shipped fully assembled with all necessary components. All nuts shall be tightened to snug fit. The fiberglass components shall be manufactured using isophthalic polyester resin and contain UV inhibitors. They shall contain a fire retardant and exhibit low smoke generation. The fiberglass components shall be gray in color and shall meet or exceed the following. FIBERGLASS SQUARE TUBE, FLAT BAR AND ROUND SPACER TUBE English Metric Mechanical Properties ASTM Value Units Value Units Tensile Strength D 0,000 psi 0. MPa Tensile Modulus D. x psi 7. GPa Compressive Strength D9 0,000 psi 0. MPa Compressive Modulus D9. x psi 7. GPa Flexural Strength D790 0,000 psi 0. MPa Flexural Modulus D790. x psi. GPa Modulus of Elasticity. x psi 9. GPa Shear Modulus 0. x psi. GPa Short Beam Shear D,00 psi.0 MPa Punch Shear D,000 psi.9 MPa Impact Strength D ft-lbs/in. J/mm English Metric Physical Properties ASTM Value Units Value Units Barcol Hardness D Hour Water Absorption D70 0.% max Density D lbs/in.7-.9 g/cc Coefficient of Thermal Expansion D9. - in/in/ F - cm/cm/ C English Metric Electrical Properties ASTM Value Units Value Units Arc Resistance D9 seconds Dielectric Strength D9 kv/in.7 kv/mm English Flammability Properties ASTM Value Units Tunnel Test E max Flammability D Nonburning UL 9 VO Smoke Chamber E Hangers are designed and fabricated in such manner as to eliminate the possibility of crushing the square tube by tightening the nuts on the suspension or intermediate rods (the spacer tube shall rest on the bottom part of the square tube). / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
9 STEEL HARDWARE SPECIFICATIONS The support rods, intermediate rods, and all metallic hardware will be manufactured as Hot Dipped Galvanized Steel, 0 Stainless Steel or Stainless Steel. These hanger components are assembled based on the specified application requirements. Complete components of a bridge hanger may include the following: " x ½" (0.mm x.7mm) Fiberglass flat bar, all holes on centerline, holes for support rods, " (mm) from each end of plate. Length as required. " x x ¼" (0.mm x 0.mm x.mm) Fiberglass square tubing, all holes on centerline, holes for support rods, " (mm) from each end of square tube. Length as required. " OD x 0.7" ID (.mm OD x 9.mm ID) Fiberglass spacer tube. Length as required. ¾" (9mm) All thread rod with nuts, lock washers and flat washers. Length as required. Hot Dipped Galvanized or Stainless Steel Rods & Nuts STEEL HARDWARE SPECIFICATIONS /" - Hardware Thread Rod /" x " FRP Flat Bar " FRP Round Tube /" x " FRP Square Tubing /" x " FRP Flat Bar EXAMPLE: W X W FLAT BAR-SQUARE TUB-FLAT 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- CHAMPION HANGERS / 9
10 STEEL HARDWARE SPECIFICATIONS HOT DIPPED GALVANIZED HARDWARE The support rods, intermediate rods, and all metallic hardware shall be hot dipped galvanized steel and shall meet or exceed the following: Threaded Rod ASTM A07 with ASTM Galvanizing Tensile Strength 7,000 psi Hex nut ASTM A07 with ASTM Galvanizing Flat washer ASTM A07 with ASTM Galvanizing Lock washer ASTM A07 with ASTM Galvanizing Metal components that are custom fabricated shall have a hot dipped galvanizing applied in accordance with ASTM specification a-/m dated 00 with a minimum coating thickness of.0 oz/sq ft. The zinc used in this process shall be a high grade zinc conforming to ASTM B-00 with less than.0% lead used in this process. 0 STAINLESS STEEL HARDWARE The support rods, intermediate rods, and all metallic hardware shall be stainless steel and shall meet or exceed the following: Threaded Rod SS0 ASTM A9 grade B Hex nut ASTM SS0 A9 grade Flat washer SS- Lock washer SS- Metal components that are custom fabricated shall be stainless steel 0 in accordance with ASTM specification A9/A9M-9b dated 99. STAINLESS STEEL HARDWARE The support rods, intermediate rods, and all metallic hardware shall be stainless steel and shall meet or exceed the following: Threaded Rod SS ASTM A9 grade BM Hex nut ASTM SS A9 grade M Flat washer SS- Lock washer SS- Metal components that are custom fabricated shall be stainless steel in accordance with ASTM specification A9/A9M-9b dated 99. Note: A completed bridge hanger also include components referenced at the beginning of this section.* / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
11 DEFLECTION Deflection is always determined at midspan. The empirical formula for deflection is: (.) 7 (.) (.) (.) (.) (.9) (.) D = W L E(OD - ID ) Where: D = Midspan deflection (in.) OD = Outside diameter of conduit (in.) ID = Inside diameter of conduit (in.) E = Modulus of elasticity of conduit (psi), which is,00,000 for epoxy fiberglass conduit L = Distance between hangers (ft.) W = Total weight of cable and conduit (lbs/ft.) It is recommended that midspan deflection never exceeds inches ( mm). Below are easy graphs for determining support distance between hangers for various diameters and wall thicknesses of conduit. 0 (0) (7) ¾" SW DIAMETER " SW DIAMETER () () () () () 9 (.7) (.) 7 (.) (.) (.) (.) (.) 0 (0) (7) () () () () () ENGINEERING/DEFLECTION GRAPHS ¼" Deflection ½" () Deflection " () Deflection ¾" (9) Deflection " () Deflection 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- CHAMPION HANGERS /
12 ENGINEERING/DEFLECTION GRAPHS (.) 9 (.7) (.) 7 (.) (.) (.) (.) (.) (.9) (.) (.) 9 (.7) (.) 7 (.) (.) (.) 0 (0) 0 (0) (7) (7) ¼" SW DIAMETER ½" SW DIAMETER () () () () () () " SW DIAMETER () () () () (.9 ) (. ) (. ) 9 (.7) (.) 7 (.) (.) (.) (.) (7.) (.) 0 (.) (.) (.) (.) (.) 0 (0) 0 (0) (7) (7) () () () () () " XW DIAMETER () () () () () " SW DIAMETER " XW DIAMETER 0 0 (.) (.) (.) (.) (.) (7.) 0 (.) (.) (.) 0 (0) (7) () () () () () 0 0 (0) (7) () () () () () ¼" Deflection ½" () Deflection " () Deflection ¾" (9) Deflection " () Deflection / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
13 (.) 0 (.) (.) (.) (.) (.) (.) (.) (7.) (7.) (.) 0 (.) (.) (.) (.) (.) 0 (0) 0 (0) (7) (7) ½" SW DIAMETER " SW DIAMETER () () () () () () () () () () (7.) (7.) (.) 0 (.) (.) (.) (.) (.) (.) 0 (7.) 0 (.) 0 (0) (7) " HW DIAMETER " XW DIAMETER 0 (0) (7) () () () () () () () () () () ENGINEERING/DEFLECTION GRAPHS " SW DIAMETER " MW DIAMETER 0 (.) (7.) (7.) (.) 0 (.) (.) (.) (.) 0 (0) (7) () () () () () (.) 0 (7.) 0 (.) 0 (0) (7) () () () () () ¼" Deflection ½" () Deflection " () Deflection ¾" (9) Deflection " () Deflection 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- CHAMPION HANGERS /
14 ENGINEERING/DEFLECTION GRAPHS 0 () (.) 0 (7.) 0 (.) (.) 0 () (.) 0 (7.) 0 (.) 0 (0) 0 (0) (7) (7) " HW DIAMETER " XW DIAMETER () () () () () () () () () () (.) 0 () (.) 0 (7.) 0 (.) (.) 0 () (.) 0 (7.) 0 (.) 0 (0) 0 (0) (7) (7) () () () () () " SW DIAMETER " MW DIAMETER () () () () () " HW DIAMETER " XW DIAMETER 0 () (.) 0 () (.) 0 () (.) 0 (7.) 0 (.) 0 (0) (7) () () () () () (.) 0 () (.) 0 (7.) 0 (.) 0 (0) (7) () () () () () ¼" Deflection ½" () Deflection " () Deflection ¾" (9) Deflection " () Deflection / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
15 BRIDGE HANGERS, " ID, SW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A.0 ().00 ().0 () ().00 () B* 7. () 7. () 7. () 7. () 7. () 7. () C (0) 7.00 (7) 7.00 (7) 7.00 (7) 7.00 (7) 7.00 (7) D Weight, Lbs. (kg).0 (.).0 (.).0 (.7) 9.0 (.).00 ().70 (.) A.0 ().00 ().0 () ().00 () B* 0. () 0. () 0. () 0. () 0. () 0. () C (0).00 ().00 ().00 ().00 ().00 () D Weight, Lbs. (kg).0.70 ().0 (.9).90 (.9).00 (.) 9.0 (.9) A.0 ().00 ().0 () ().00 () B*.7 (7).7 (7).7 (7).7 (7).7 (7).7 (7) C (0).0 ().0 ().0 ().0 ().0 () D Weight, Lbs. (kg) 7.0 (.) 9.0 (.).0 (.).0 (.7) 7.0 (7.).0 (.) A.0 ().00 ().0 () ().00 () B*.7 ().7 ().7 ().7 ().7 ().7 () C (0).0 (9).0 (9).0 (9).0 (9).0 (9) D Weight, Lbs. (kg).70 (.9).0 (.).0 (.). (.).0 (9.7) 7.0 (.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube BRIDGE HANGERS, " IPS, SW & " ID, XW FIBERGLASS CONDUIT Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A. (7).7 (7). (7).0 (70). (). (7) B* 7. () 7. () 7. () 7. () 7. () 7. () C (0) 7. (7) 7. (7) 7. (7) 7. (7) 7. (7) D. (7). (7). (7). (7). (7) 7. (7) Weight, Lbs. (kg).0 (.) 7.00 (.).0 (.9). (.).0 (.).0 (.) A. (7).7 (7). (7).0 (70). (). (7) B*.00 ().00 ().00 ().00 ().00 ().00 () C (0).7 (7).7 (7).7 (7).7 (7).7 (7) D. (7). (7). (7). (7). (7). (7) Weight, Lbs. (kg).90 (.) 9.0 (.).0 (.).0 (.). (7.).00 (9.) A. (7).7 (7). (7).0 (70). (). (7) B*. (9). (9). (9). (9). (9). (9) C (0). (9). (9). (9). (9). (9) D. (7) 9. (7). (7). (7). (7). (7) Weight, Lbs. (kg) 7.0 (.).0 (.).0.90 (7.).90 (7.).0 () A. (7).7 (7). (7).0 (70). (). (7) B* 7.7 (70) 7.7 (70) 7.7 (70) 7.7 (70) 7.7 (70) 7.7 (70) C (0) 7.0 () 7.0 () 7.0 () 7.0 () 7.0 () D. (7). (7). (7) 0. (7). (7). (7) Weight, Lbs. (kg) 9.0 (.).70 (.).70 (7.) 9.0 (.9). (.) 9.90 (.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. INTERMEDIATE TYPE CHAMPION HANGERS A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- CHAMPION HANGERS /
16 INTERMEDIATE TYPE CHAMPION HANGERS BRIDGE HANGERS, " ID, SW, FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A 7.0 (9).00 (0).0 (9).00 ().0 () 0.00 (7) B* C (0).00 (0).00 (0).00 (0).00 (0).00 (0) D.0 (9).0 (9).0 (9).0 (9).0 (9) 7.0 (9) Weight, Lbs. (kg).0 (.) 7.0 (.) 9.0 (.).90 (.9).0 (.7).0 (7.) A 7.0 (9).00 (0).0 (9).00 ().0 () 0.00 (7) B*. (). (). (). (). (). () C (0).00 (0).00 (0).00 (0).00 (0).00 (0) D.0 (9).0 (9).0 (9).0 (9).0 (9).0 (9) Weight, Lbs. (kg) 7.0 (.).00 (.).0 (.7).0 (.9) 7.0 (.).0 (.) A 7.0 (9).00 (0).0 (9).00 ().0 () 0.00 (7) B*.7 ().7 ().7 ().7 ().7 ().7 () C (0).0 (9).0 (9).0 (9).0 (9).0 (9) D.0 (9) 9.0 (9).0 (9).0 (9).0 (9).0 (9) Weight, Lbs. (kg).0 (.).0 (.).70 (.7) 7.0 (.) 0.90 (9.) 7.0 (.) A 7.0 (9).00 (0).0 (9).00 ().0 () 0.00 (7) B* 9.7 (7) 9.7 (7) 9.7 (7) 9.7 (7) 9.7 (7) 9.7 (7) C (0) 9.0 (9) 9.0 (9) 9.0 (9) 9.0 (9) 9.0 (9) D.0 (9).0 (9).0 (9) 0.0 (9).0 (9).0 (9) Weight, Lbs. (kg). (.). (.) 7.0 (). ().0 (.9).90 (.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube BRIDGE HANGERS, " IPS, SW, & " ID, XW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A 7. (00).7 7. ().0 (7) 7. (9). (9) B*. (7). (7). (7). (7). (7). (7) C (0). (). (). (). (). () D. (9). (9). (9). (9). (9) 7. (9) Weight, Lbs. (kg).90 (.7) 7.70 (.) 9.0 (.).0 (.).0.0 (7.) A 7. (00).7 7. ().0 (7) 7. (9). (9) B*.00 ().00 ().00 ().00 ().00 ().00 () C (0) D. (9). (9). (9). (9). (9). (9) Weight, Lbs. (kg) 7.70 (.).0 (.).0. (7.).90 (.).0 (.) A 7. (00).7 7. ().0 (7) 7. (9). (9) B*. (). (). (). (). (). () C (0). (). (). (). (). () D. (9) 9. (9). (9). (9). (9). (9) Weight, Lbs. (kg).90 ().0 (.).0 (7.).90 (.).0 (.) 9.00 (.) A 7. (00).7 7. ().0 (7) 7. (9). (9) B*. (79). (79). (79). (79). (79). (79) C (0).00 ().00 ().00 ().00 ().00 () D. (9). (9). (9) 0. (9). (9). (9) Weight, Lbs. (kg).70 (.).00 (.).70 (.).70 (.7). (.7).0 (.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
17 BRIDGE HANGERS,." ID, SW, FIBERGLASS CONDUIT Number of Ducts Wide Part Number of Ducts High A B* C D Weight, Lbs. (kg) A B* C D Weight, Lbs. (kg) No. Req d 0 0 Length No. inch (mm) Req d Length No. inch (mm) Req d Length No. inch (mm) Req d Length No. inch (mm) Req d Length No. inch (mm) Req d Length inch (mm).00 (0).00 (0).7 (7).7 (7) 0.00 (0).0 ().00 ().00 ().00 (.7) 7.0 (.).00 (0).00 (0). (9). (9) 0.00 (0).00 (0).00 ().00 () 7.ig99.7ATd( )d( [ ) Td(W-) () (7) (7) () () (.) (7) (9) (0) () () (7) () () (.) () (9) (0) () (7) (7) () () (.) (7) (9) (0) () () (7) () () (7.) () (9) (0) () BRIDGE HANGERS, " ID, SW & HW, FIBERGLASS CONDUIT
18 INTERMEDIATE TYPE CHAMPION HANGERS BRIDGE HANGERS, " IPS, SW & HW & " ID, XW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A. ().7 (7) 0. ().0 (7). (). (97) B* 9. (9) 9. (9) 9. (9) 9. (9) 9. (9) 9. (9) C (0) 9. () 9. () 9. () 9. () 9. () D. (). (). (). (). () 7. () Weight, Lbs. (kg).0 (.9).0 (.).0 (.).70 (.7).0 (.7). (.) A. ().7 (7) 0. ().0 (7). (). (97) B*.00 ().00 ().00 ().00 ().00 ().00 () C (0).7 (7).7 (7).7 (7).7 (7).7 (7) D. (). (). (). (). (). () Weight, Lbs. (kg).0 (.9).0 (.). (.9).0 (.).70 (9.). (.7) A. ().7 (7) 0. ().0 (7). (). (97) B* 9. (79) 9. (79) 9. (79) 9. (79) 9. (79) 9. (79) C (0) 9. (9) 9. (9) 9. (9) 9. (9) 9. (9) D. () 9. (). (). (). (). () Weight, Lbs. (kg).00 (.).00 (.).00 (.).00 ().00 (.).70 (.) A. ().7 (7) 0. ().0 (7). (). (97) B*. (9). (9). (9). (9). (9). (9) C (0).00 ().00 ().00 ().00 ().00 () D. (). (). () 0. (). (). () Weight, Lbs. (kg). (.) 7.0 (7.9).70 (9.) 7.70 (.).00 ().0 (9.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube BRIDGE HANGERS,." ID, SW & HW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A ().00 () 7.00 ().00 () 9.00 (99) B* 9.7 (0) 9.7 (0) 9.7 (0) 9.7 (0) 9.7 (0) 9.7 (0) C (0) 9.0 () 9.0 () 9.0 () 9.0 () 9.0 () D.00 (7).00 (7).00 (7).00 (7).00 (7) 7.00 (7) Weight, Lbs. (kg).0 (.9).0 (.9).70 (.).0 (.).00 (.).0 (.) A ().00 () 7.00 ().00 () 9.00 (99) B*. (). (). (). (). (). () C (0).00 ().00 ().00 ().00 ().00 () D.00 (7).00 (7).00 (7).00 (7).00 (7.00 (7) Weight, Lbs. (kg).0 (.9).00 (.).0 (7).70 (.).00 ().0 () A ().00 () 7.00 ().00 () 9.00 (99) B* 0. (7) 0. (7) 0. (7) 0. (7) 0. (7) 0. (7) C (0) 0.00 (0) 0.00 (0) 0.00 (0) 0.00 (0) 0.00 (0) D.00 (7) 9.00 (7).00 (7).00 (7).00 (7).00 (7) Weight, Lbs. (kg). (.).0 (.).0 (.).0 (.).0 ().0 (.) A ().00 () 7.00 ().00 () 9.00 (99) B*.7 (90).7 (90).7 (90).7 (90).7 (90).7 (90) C (0).0 ().0 ().0 ().0 ().0 () D.00 (7).00 (7).00 (7) 0.00 (7).00 (7).00 (7) Weight, Lbs. (kg).0 (.) 7.0 (). ().0 (.).0 (.).0 (9.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
19 BRIDGE HANGERS, " ID, SW, MW & HW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A 9.0 ().00 (0).0 (7) 9.00 (77).0 (90).00 (7) B* 0. () 0. () 0. () 0. () 0. () 0. () C (0).00 ().00 ().00 ().00 ().00 () D.0 ().0 ().0 ().0 ().0 () 7.0 () Weight, Lbs. (kg).0.90 ().0 (.).0 (.).70 (7.) 9.0 (.) A 9.0 ().00 (0).0 (7) 9.00 (77).0 (90).00 (7) B*. (7). (7). (7). (7). (7). (7) C (0).00 (0).00 (0).00 (0).00 (0).00 (0) D.0 ().0 ().0 ().0 ().0 ().0 () Weight, Lbs. (kg) 9.00 (.).0 (.7).0 (7.) (.) 0.0 (.) A 9.0 ().00 (0).0 (7) 9.00 (77).0 (90).00 (7) B*.7 (0).7 (0).7 (0).7 (0).7 (0).7 (0) C (0).0 ().0 ().0 ().0 ().0 () D.0 () 9.0 ().0 ().0 ().0 ().0 () Weight, Lbs. (kg).0 (.). (.) 9.0 (.).90 (.).0 (.).70 (.) A 9.0 ().00 (0).0 (7) 9.00 (77).0 (90).00 (7) B* 7.7 (99) 7.7 (99) 7.7 (99) 7.7 (99) 7.7 (99) 7.7 (99) C (0) 7.0 (99) 7.0 (99) 7.0 (99) 7.0 (99) 7.0 (99) D.0 ().0 ().0 () 0.0 ().0 ().0 () Weight, Lbs. (kg). (.9).0 (.).0 (.7) 0.0 (.7). (.).0 (.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube BRIDGE HANGERS, " IPS, SW, MW & HW & " ID, XW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A 9. ().7 (). (00) 0.0 (77) 7. (99). () B* 0. () 0. () 0. () 0. () 0. () 0. () C (0)..... D. (9). (9). (9). (9). (9) 7. (9) Weight, Lbs. (kg).0 (.) 9.0 (.).0 (.).00 (.).0 (7.) 0.00 (9.) A 9. ().7 (). (00) 0.0 (77) 7. (99). () B* 7.00 () 7.00 () 7.00 () 7.00 () 7.00 () 7.00 () C (0).7 ().7 ().7 ().7 ().7 () D. (9). (9). (9). (9). (9). (9) Weight, Lbs. (kg) 9.0 (.)..90 (7.7) 0.70 (9.).0 (.).70 (.) A 9. ().7 (). (00) 0.0 (77) 7. (99). () B*. (). (). (). (). (). () C (0). (7). (7). (7). (7). (7) D. (9) 9. (9). (9). (9). (9). (9) Weight, Lbs. (kg). ().70 (7.) 0.0 (9.).00 (.) 9.70 (.).0 (7.) A 9. ().7 (). (00) 0.0 (77) 7. (99). () B* 9. (997) 9. (997) 9. (997) 9. (997) 9. (997) 9. (997) C (0) 9.00 (77) 9.00 (77) 9.00 (77) 9.00 (77) 9.00 (77) D. (9). (9). (9) 0. (9). (9). (9) Weight, Lbs. (kg).0 (.) 9.70 (.9).70 (.).0 (.).00 (7.).0 (.) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. INTERMEDIATE TYPE CHAMPION HANGERS A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- CHAMPION HANGERS / 9
20 INTERMEDIATE TYPE CHAMPION HANGERS BRIDGE HANGERS, " ID, SW, MW & HW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A.0 (7).00 (7).0 ().00 () 0.0 (9).00 (9) B*. (0). (0). (0). (0). (0). (0) C (0).00 (79).00 (79).00 (79).00 (79).00 (79) D.0 ().0 ().0 ().0 ().0 () 7.0 () Weight, Lbs. (kg) 7. (.) 9.0 (.).0 (.).0 (.7) 7.0 (7.9).0 (9.) A.0 (7).00 (7).0 ().00 () 0.0 (9).00 (9) B*. (7). (7). (7). (7). (7). (7) C (0).00 (7).00 (7).00 (7).00 (7).00 (7) D.0 ().0 ().0 ().0 ().0 ().0 () Weight, Lbs. (kg) 9.0 (.).90 (.).00 (.).0 ().0 (.9).90 (.) A.0 (7).00 (7).0 ().00 () 0.0 (9).00 (9) B*.7 ().7 ().7 ().7 ().7 ().7 () C (0) D.0 () 9.0 ().0 ().0 ().0 ().0 () Weight, Lbs. (kg).70 (.).0 (7.).90 (9.9).90 (.).00 (.).0 (.) A.0 (7).00 (7).0 ().00 () 0.0 (9).00 (9) B*.7 (0).7 (0).7 (0).7 (0).7 (0).7 (0) C (0).0 (00).0 (00).0 (00).0 (00).0 (00) D.0 ().0 ().0 () 0.0 ().0 ().0 () Weight, Lbs. (kg).0 (.). (9.).0 (.).0 (.).00 (.).70 (.9) *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube BRIDGE HANGERS, " IPS, SW, MW & HW & " ID, XW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A. (7).7 (7). (7).0 (7). (7) 0. (7) B*. (9). (9). (9). (9). (9). (9) C (0). (9). (9). (9). (9). (9) D. (7). (7). (7). (7). (7) 7. (7) Weight, Lbs. (kg) 7.0 (.) 9.90 (.).0 (.7).0 (.9) 7.90 (.).90 (9.9) A. (7).7 (7). (7).0 (7). (7) 0. (7) B* 9.00 (77) 9.00 (77) 9.00 (77) 9.00 (77) 9.00 (77) 9.00 (77) C (0).7 (7).7 (7).7 (7).7 (7).7 (7) D. (7). (7). (7). (7). (7). (7) Weight, Lbs. (kg). (.).0 (.).70 (.).00 (.) 7.0 (.).0 () A. (7).7 (7). (7).0 (7). (7) 0. (7) B*. (9). (9). (9). (9). (9). (9) C (0). (). (). (). (). () D. (7) 9. (7). (7). (7). (7). (7) Weight, Lbs. (kg). (.) 7.0 (7.9).0 (.). (.7).0 (.). (9.) A. (7).7 (7). (7).0 (7). (7) 0. (7) B*. (99). (99). (99). (99). (99). (99) C (0).00 ().00 ().00 ().00 ().00 () D. (7). (7). (7) 0. (7). (7). (7) Weight, Lbs. (kg).00 (.).00 () 7.70 (.).0 (.).90 (9.). () *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube 0 / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
21 BRIDGE HANGERS, " IPS, SW, MW & HW FIBERGLASS CONDUIT Number of Ducts High Number of Ducts Wide No. Length No. Length No. Length No. Length No. Length No. Length Part Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) Req d inch (mm) A.00 (0).00 ().00 ().00 (9).00 ().00 (0) B*.7 (0).7 (0.7 (0).7 (0).7 (0).7 (0) C (0).0 ().0 ().0 ().0 ().0 () D Weight, Lbs. (kg). (.7).0 (.).70 (.7).00 (.).0 (9.7).0 (.7) A.00 (0).00 ().00 ().00 (9).00 ().00 (0) B*. (). (). (). (). (). () C (0).00 ().00 ().00 ().00 ().00 () D Weight, Lbs. (kg).0 (.) 7.0 (7.).0 (.) 7.90 (.7).0 (.).0 (9.) A.00 (0).00 ().00 ().00 (9).00 ().00 (0) B*. (7). (7. (7). (7). (7). (7) C (0).00 ().00 ().00 ().00 ().00 () D Weight, Lbs. (kg).0 (.). (9.) 7.0 (.).0 (.7).0 (.7).0 (.) A.00 (0).00 ().00 ().00 (9).00 ().00 (0) B*.7 ().7 ().7 ().7 ().7 ().7 () C (0).0 ().0 ().0 ().0 ().0 () D Weight, Lbs. (kg). (.).90 (.). (.).0 (0.).0 (.).0 () *These dimensions are based on the support rod being " lg (0) above the top horizontal cross member. A = Horizontal Flatbar B = Support Rod C = Intermediate Rod D = Spacer Tube INTERMEDIATE TYPE CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH- CHAMPION HANGERS /
22 LIMITED WARRANTY LIMITED WARRANTY This warranty covers any Champion Fiberglass, Inc. ( Champion ) electrical conduit products ( Product ). Subject to the terms and conditions of this warranty, Champion warrants that the Product is free from defects in workmanship and materials for a period of one () year from the date of purchase. During the applicable terms of this warranty, and subject to the terms and conditions thereof, in the event that the Product is proven to be defective and the defect is not caused by any misuse or damage to the Product while in the possession of the user, Champion will remedy the failure or defect without charge to the user except for labor. The remedy will consist of repair or replacement of the Product and or defective part, at Champion s option. Repair will be made, at Champion s option, either at user s location or at a facility designated by Champion. Any replacement part provided under this warranty assumed as its warranty period only the unexpired term of this warranty, which is fixed when such part replaces a defective part. This warranty does not cover defects, failure or damages caused by normal wear and tear, act of God, accident, misuse or unreasonable use of the Product, lack of proper maintenance, fire, flood, or any circumstances or events beyond Champion s control. Champion s sole obligation under this warranty is to repair or replace the product, as provided herein. Champion shall have no liability for any direct, incidental, special or consequential damages resulting from breach of this or any other warranty (no warranty being implied from this reference) on the product. Except to the extent prohibited by applicable law, any implied warranty, including without limitation, of merchantability or fitness for any particular purchase with respect to the product, is limited in duration to the term of this warranty. This warranty is in lieu of any other express warranties and of any other obligation on the part of Champion. Any other express warranties are expressly excluded and disclaimed. No Champion representative is authorized to give any warranty (other than this warranty) with respect to the product, and any such warranty given by a Champion representative shall not constitute a Champion warranty or be binding in any respect upon Champion. Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you. To obtain performance of any obligation of Champion under this warranty, the user must provide proof of the date of purchase, notify Champion of any warranty claim at the following address: CHAMPION FIBERGLASS, INC. 00 Spring Stuebner Rd Spring, TX 779 Attention: Warranty Claims Telephone: () -900 Notify the nearest Champion authorized representative for inspection of the Product. For the name of the nearest authorized representative, refer to our web site: / Locate a Rep Tab / or you can contact our corporate offices for the appropriate Representative's contact information. Any written correspondence can be mailed to our corporate offices at the address above. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. / CHAMPION HANGERS 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» info@championfiberglass.com» championfiberglass.com BH-
23 CERTIFICATE OF REGISTRATION This is to certify that Champion Fiberglass Inc. 00 Spring Stuebner Rd., Spring, Texas 779 USA operates a Quality Management System which complies with the requirements of ISO 900:00 for the following scope of registration Manufacture of fiberglass conduit and fittings. Certificate No.: File No.: Issue Date: CERT September, 0 Original Certification Date: November, 009 Current Certification Date: November, 0 Certificate Expiry Date: November, 0 Chris Jouppi Guillaume Gignac, ing.f President, Vice President, Corporate Operations, Accreditation & Quality QMI-SAI Canada Limited QMI-SAI Canada Limited ISO 900 Registered by: SAI Global Certification Services Pty Ltd, Sussex Street, Sydney NSW 000 Australia with QMI-SAI Canada Limited, 0 Carlson Court, Suite 00, Toronto, Ontario M9W 7K Canada (SAI GLOBAL). This registration is subject to the SAI Global Terms and Conditions for Certification. While all due care and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for proven negligence. This certificate remains the property of SAI Global and must be returned to them upon request. To verify that this certificate is current, please refer to the SAI Global On-Line Certification Register:
24 00 Spring Stuebner Rd Spring, TX 779 Main:..900 Fax:.7.» championfiberglass.com 0 by Champion Fiberglass, Inc. All rights reserved. This catalog, or parts thereof, may not be reproduced in any other format without written permission of the publishers.
DUCT CHAMPION CONTENTS
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, strut and bridge hangers for electrical and mechanical markets. Champion Fiberglass, began production of epoxy fiberglass conduit
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationPIP STF05121 Anchor Fabrication and Installation Into Concrete
June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationThe Balustrade Collection
The Balustrade Collection The Hartmann Sanders Balustrade Collection is designed for a Lifetime of Enjoyment. Whether it is a restoration or a classic addition, the Hartmann Sanders Balustrade Collection
More informationThe Saddle Rack. For Power And Communication Cables
The Saddle Rack For Power And Communication Cables Underground Devices SADDLE RACKS: Low Cost, But Tough and Non-Corrosive For Temporary Support or Permanent Installation For Use in Manholes, Handholes,
More informationInstallation Instructions
Installation Instructions Sure Step (Part # DN260-S4B/ DN260-S4S Part # DN270-S4B/ DN270-S4S) 2009-2010 Dodge Ram1500 Crew Cab & Quad Cab 2010 Ram 2500/3500 Crew Cab For Technical Support/Warranty Information
More informationTECHNICAL CORRECTION October Process Industry Practices Structural. PIP STF05121 Fabrication and Installation of Anchor Bolts
TECHNICAL CORRECTION October 2006 Process Industry Practices Structural PIP STF05121 Fabrication and Installation of Anchor Bolts PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS P4263F Universal Low Profi le Flat Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888
More informationRELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
More informationAM95 Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components: Maximum Flat Panel Weight: 95 lb. / 43.1 kg. M4 X 25mm M5 X 25mm M6 X 12mm (Qty 2) M6 X 25mm M8 X 25mm Allen Key Plastic Cover
More informationSERIES M MIXER MASTS
SERIES M MIXER MASTS T AB L E O F C O N T E N T S V e n d o r D a t a Material Data Sheet 4-in. Mixer Mast Specification 3-in. Mixer Mast Specification 2 - in. M i x e r M a s t S p e c i f i c a t i o
More information00108/00110 INSTRUCTION MANUAL
00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Please Read this Instruction Booklet prior to assembly of your Rock Tamer Kit. IMPORTANT! Exhaust Systems Note: Any modifications
More informationSECTION STRUCTURAL STEEL. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 051200 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationRITE-HITE TPC. FOAM DOCK SEAL WITH HEAD CURTAIN Installation Instructions & Owner s Manual. Date of Installation:
RITE-HITE TPC FOAM DOCK SEAL WITH HEAD CURTAIN Installation Instructions & Owner s Manual Date of Installation: This Manual Covers All Units Shipped 4/08 to Date PRINTED IN U.S.A. PUBLICATION TPC00001
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm for 37 to 47 Flat Panels Model: AM80 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationMechanical Support Systems, Inc.
Mechanical Support Systems, Inc. CATALOG February, 2014 www.thesmartsupports.com 408.601.0155 1 N E W W E B S I T E.N E W P R O D U C T S Mechanical Support Systems, Inc. is certified as a women s business
More informationFXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER #
ZOMEWORKS FXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER # 1 1011 Sawmill Road NW, PO Box 25805, Albuquerque, NM 87125 USA (505) 242-5354 / (800) 279-6342 / FAX (505) 243-5187 E-mail: zomework@zomeworks.com
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationUP139 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 AN
UP39 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 ANGLE BRACKET TUBE BRACKET TUBE WARNING LABEL PLATE HARDWARE
More informationInstallation Procedures For 2013 Mustang V-6 and 5.0
Installation Procedures For 2013 Mustang V-6 and 5.0 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.. Also
More informationCITY OF PITTSBURG ENGINEERING DEPARTMENT CONTRACT NO A WATER TREATEMENT PLANT CAPITAL IMPROVEMENTS PHASE 1A ADDENDUM #1 FENCE AND DITCH AUGUST
CITY OF PITTSBURG ENGINEERING DEPARTMENT CONTRACT NO. 2012-16A WATER TREATEMENT PLANT CAPITAL IMPROVEMENTS PHASE 1A ADDENDUM #1 FENCE AND DITCH AUGUST 2014 CHAIN LINK FENCE SPECIFICATIONS Chain link fence,
More informationOWNER S MANUAL AMERICA S PREMIER XXL SUPER RACKS XXL-2960 SUPER RACK/SMITH MACHINE XXL-2960 L 112 W 86 H 100 XXL-2960 / XXL-912 L 179 W 91 H 100
OWNER S MANUAL XXL-60 L 11 W 6 H 100 XXL-60 SUPER RACK/SMITH MACHINE XXL-60 / XXL-1 L 1 W 1 H 100 AMERICA S PREMIER XXL SUPER RACKS XXL-60 Rev0 Revision Date -1-07 COLOR CHART GRAY= SUB-ASSEMBLY PARTS
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationInstallation Procedures 2018 Mustang GT & EcoBoost SNS 135
Installation Procedures 2018 Mustang GT & EcoBoost SNS 135 Warning: Please read directions completely before starting. If you have any questions, please contact BMPP before beginning your installation.
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationUP133 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CL
UP33 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL TRIANGLE
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationSingle Flex and Double Flex Couplings (i)
Single Flex and Double Flex Couplings (i) FORM NO. L00G00 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change
More informationLM600 Landmark Permanent Blind
LM600 Landmark Permanent Blind Get parts online at www.huntriversedge.com P/N: 23033 REV1: 02/23/16 2016 RETI All Rights Reserved INTRODUCTION Landmark Permanent Blinds are engineered with you the hunter
More informationHardware Box 1 1/4 Diameter x 3/4 Long Bolts 24 1/4 Nylon Lock Nut 24 1/4 Diameter x 3 Long Lag Bolt 8 1/4 Washers 56
Warning: Excessive weight hazard! Use two or more people to move, assemble or install overhead rack to avoid back or other injury. Do not leave children unattended near overhead rack. High risk of injury
More informationINSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L. Introduction. Box Contents. Wall Mount Installations
INSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L Introduction Thank you for purchasing the Sonance Soundbar SB46 M or SB46 L. When properly installed your new Soundbar will give you years of entertainment
More informationSECTION CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270536 - CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSingle Arm Pole Mount. Installation Manual Edition v1.01. For models: UNI-SA/14 UNI-SA/21.5 UNI-SA/26 UNI-SA01-MAN
Pole Mount Installation Manual 2016 Edition v1.01 For models: UNI-SA/14 UNI-SA/21.5 UNI-SA/26 UNI-SA01-MAN Table of Contents 1 1 2 3 4 5 5 Introduction Customer Support Project Essentials Assembly: Steps
More informationUP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationPRC-LA Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: Warning Statements 50 lbs. THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR TIMES THE WEIGHT OF
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More informationEMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL
EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION 05720 METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL EMMEGI ARCHITECTURAL FENCING is a high quality steel fencing system comprised of a hybrid
More informationSECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section
02760-1 of 5 SECTION 02760 STEEL LIGHTING STANDARDS 02760.01 GENERAL A. Description Steel lighting standards shall include, but not necessarily be limited to, furnishing and installing steel lighting poles,
More informationAPPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
More informationPATRIOT DOCKS ASSEMBLY INSTRUCTIONS
6/1/2008 PATRIOT DOCKS ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical shoreline application.
More information60 Meter Mono-Band Conversion Kit for the DXE-MBVE-5A Multi-Band Vertical Antenna
60 Meter Mono-Band Conversion Kit for the DXE-MBVE-5A Multi-Band Vertical Antenna DXE-MBVE-5A60MCK DXE-MBVE-5A60MCK-INS Revision 0a DX Engineering 2017 1200 Southeast Ave. - Tallmadge, OH 44278 USA Phone:
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More informationModel DB Disc Caliper Brake AIR CHAMP PRODUCTS. User Manual. (i) MTY (81)
DIST. AUTORIZADO MEX (55) 53 63 3 3 QRO (44) 95 7 60 MTY (8) 83 54 0 8 AIR CHAMP PRODUCTS User Manual Model DB Disc Caliper Brake (i) FORM NO. L-00-G-030 MEX (55) 53 63 3 3 MTY (8) 83 54 0 8 DIST. AUTORIZADO
More informationInstallation Procedures Jaguar XF SNS 92
Installation Procedures 2016-2017 Jaguar XF SNS 92 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation. Also please
More informationFull Height Ladder Safety Gate
Full Height Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models Powder Coat Yellow (PCY) 304 Stainless Steel (SS) Hot Dipped Galvanized (GAL) Table of Contents Product
More informationInstallation Manual. Tamarack Solar Products. Top of Pole Mount Edition v1.01. For models:
Mount Installation Manual 2016 Edition v1.01 For models: UNI-TP/06 UNI-TP/06LL UNI-TP/08 UNI-TP/08LL UNI-TP/10 UNI-TP/10LL UNI-TP/12 UNI-TP/12LL UNI-TP02-MAN Table of Contents 1 Introduction 1 2 Customer
More informationSpecifications. Important Safety Information
Specifications Tire Rim Capacity 4 to 12 Rim Height 16 (2) Bead Breaker Handles 21 Long Includes Aluminum Centering Cone (2) Nylon Spacers Important Safety Information 1. Do not exceed max. tire capacity.
More informationElco Construction Products 1301 Kerr Drive Decorah, IA fax:
Technical Manual 2010 HangerMate anchors were designed to speed installation of fire sprinkler, HVAC, refrigeration, general piping, and electrical systems. They can also be used to install strut channels,
More informationInstallation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com
Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-5 to LSG-48 Table of Contents Product Information...2 Inspection & Mainteance...2 Warranty Information...2
More informationModel 3101, 3102 and 3103 Conical Log-Spiral Antennas
Model 3101, 3102 and 3103 Conical Log-Spiral Antennas MANUAL EMC TEST SYSTEMS, L.P. SEPTEMBER 2002 EMC Test Systems, L.P. reserves the right to make changes to any products herein to improve functioning,
More informationBy SP Partners, LLC. INSTALLATION GUIDE. ProTech-12
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech-12 IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed while home is under
More information15 Planer Stand. Model Due to continuing improvements, actual product may differ slightly from the product described herein.
15 Planer Stand Model 96316 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,
More informationGrounding and Utility Enclosure
Grounding and Utility Enclosure DXE-UE-2P DXE-UE-2P-INS Rev 1f DX Engineering 2017 1200 Southeast Ave. - Tallmadge, OH 44278 USA Phone: (800) 777-0703 Tech Support and International: (330) 572-3200 Fax:
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationManual Carton Closing Staplers
Operator s Manual Manual Carton Closing Staplers SHB00-A Item No. 6400 -/8" Crown Carton Closing Stapler 5/8" and /4" (5mm and 8mm) Ask for Genuine INTERCHANGE A58 and A4 Staples SHB50-C Item No. 640 -/4"
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationPlease Do Not Return This Product To The Store!
MODEL NO. B330 Goalrilla E BASKETBALL SYSTEM OWNER'S MANUAL. Read this manual carefully before starting assembly. Read each step completely before beginning each step.. Some smaller parts may be shipped
More informationFlat Sample Holder Part Number
Flat Sample Holder Part Number 990-00403 (Patent Pending) Operator s Manual Copyright 2016 Gamry Instruments, Inc. April 8, 2016 988-00043 Rev. 1 If You Have Problems Please visit our service and support
More informationInstallation Instructions HOSS Hardtop Organized Storage System
Installation Instructions HOSS Hardtop Organized Storage System Application: Hard Top and Doors Storage System Part Number: 42801 www.bestop.com - We re here to help! Visit our web site and click on Ask
More informationSECTION CABLE TRAYS
SECTION 16139 CABLE TRAYS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationSTEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationInstallation Procedures Maserati Gran Turismo Sport SNS 85
Installation Procedures 2012-2017 Maserati Gran Turismo Sport SNS 85 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationCollins Engineers Palmetto Islands County Park Boardwalk Repairs 03/28/2014 SECTION ROUGH CARPENTRY
PART 1 GENERAL 1.1 RELATED SECTIONS SECTION 061000 ROUGH CARPENTRY A. Drawings and general provisions of the Construction Contract, including General Conditions and Division 1 Specification Sections, apply
More informationP4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels
Low-Profile Tilting Portrait Mount for Flat-Panels 1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: 175 lbs. Warning Statements THE WALL STRUCTURE MUST BE CAPABLE
More informationInstallation Procedures Dodge Challenger SXT, R/T, Scat Pak, SRT & Hellcat SNS 1a
Installation Procedures 2015-2017 Dodge Challenger SXT, R/T, Scat Pak, SRT & Hellcat SNS 1a Warning: Please read directions completely before starting. If you have any questions, please contact BMPP before
More informationOwner s Manual GS2010 Garden Seeder/Fertilizer. Caution: Carefully read all Rules and Instructions for Safe Operation.
Manufacture s Limited Warranty for The limited warranty set forth below is given by Precision Products, Incorporated with respect to new merchandise purchased and used in the United States, its possessions
More informationInstallation Instructions HighRock 4x4 TM
Installation Instructions HighRock 4x4 TM Slider Step Vehicle Application: Jeep CJ Wrangler 1976 1986 Part Number: 49311 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question.
More informationStandard Specification for Fence Fittings 1
Designation: F 626 08 Standard Specification for Fence Fittings 1 This standard is issued under the fixed designation F 626; the number immediately following the designation indicates the year of original
More informationInstallation Manual Roof Zone Ladder Rack
Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32
More informationPBM-UNI Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Warning Statements Warning Warning Warning THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR (4) TIMES THE WEIGHT OF THE PROJECTOR.
More informationInstallation Procedures For Corvette Basic/C-6 SNS 28
Installation Procedures For 2005-2013 Corvette Basic/C-6 SNS 28 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.
More informationBy SP Partners, LLC. INSTALLATION GUIDE. ProTech
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE ProTech IMPORTANT - READ THIS FIRST Inspect stair for any damage
More informationYGR-LO-8 GUARD RAILING YGR-TP18 & YGR-TP42 POSTS Installation Manual
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More informationVentilation System. Installation Manual. Hog Slat Inc. Newton Grove, NC USA March
Installation Manual 1 Tunnel Door Framing Instructions It is import to make sure the Tunnel Door opening is flat and plumb. A maximum variation of +/- ½ throughout the length of the opening is acceptable.
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationInstallation Manual. Tamarack Solar Products. Side of Pole Mount Edition v1.02. For models:
Mount Installation Manual 2016 Edition v1.02 For models: UNI-SP/01 UNI-SP/01A UNI-SP/01XH UNI-SP/01XX UNI-SP/02 UNI-SP/02A UNI-SP/02X UNI-SP/03 UNI-SP01-MAN Table of Contents 1 Introduction 1 Customer
More informationPlanishing hammer stand For use with SKU Planishing hammer
Planishing hammer stand For use with SKU 94847 Planishing hammer Model 96300 Assembly And Operation Instructions Please Note: Planishing Hammer not included with Stand. Due to continuing improvements,
More informationInstallation Instructions Lower Cargo Rack Bracket
Installation Instructions Lower Cargo Rack Application: Jeep Wrangler 2003 Current Part Number: 41437 US Patent 6799706 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question.
More informationTop Mount. See Installation 2 on page 2
INSTALLATION INSTRUCTIONS TOILET SEAT Thank you for selecting American Standard the benchmark of fine quality for over 00 years. To ensure this product is installed properly, please read these instructions
More informationCATALOG FOR WOODCO USA Brand 150 TON SPIDER. API ROTARY TAPER TRADEMARK WOODCO BUY THE BRAND REG. U.S. PATENT OFFICE MANUFACTURER
CATALOG FOR WOODCO USA Brand 150 TON SPIDER. API ROTARY TAPER Hinged Casing and Tubing Spider, includes an assembly drawing, dimensions, weight and parts list. TRADEMARK WOODCO USA BUY THE BRAND REG. U.S.
More informationSonoma Outdoor Kitchen Pergola. Assembly Instructions
Sonoma Outdoor Kitchen Pergola Assembly Instructions Introduction Thank you for your purchase from The Outdoor GreatRoom Company. This pergola has been engineered and manufactured in the USA. This user
More informationorientation Conergy SunTop Instructions for professional installation
On-roof Framed modules Portrait orientation Landscape Three-tab Shingle Plain tile Slate Double Roman tile Metal roof Material warranty orientation Conergy SunTop Instructions for professional installation
More information1-CYLINDER TORNADO LIFT INSTALLATION MANUAL
1-CYLINDER TORNADO LIFT INSTALLATION MANUAL Model: TORNADO LIFT 2K 2018 Edition PROVIDED FOR ASSEMBLY Foot Pads 12 sq. Square Tube Legs (optional) Cross Beams Side Beams 2.5 Dia. Cylinders (with hoses
More informationInstallation Instructions:
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. (SB76904) Parts Included Qty 94-241CA001 Front Upright: Drvr 1 94-241CA002 Front Upright: Pass 1 94-241CA003
More informationCRD 410 MANUAL FITTING INSERTER
CRD 410 MANUAL FITTING INSERTER OPERATIONS MANUAL VERSION 1.2 LAST EDITED 05.01.2018 cleanroomdevices.com 1 Table of Contents Title Page 1 Table of Contents 2 1.0 General Product & Safety Information...3
More informationDeck Designer Specification Kit For. TimberTech. All rights reserved copyright 2015 AZEK Building Products
Deck Designer Specification Kit For TimberTech All rights reserved copyright 2015 AZEK Building Products Deck layout diagram Top view without planks Bottom view with planks Top view with planks Page 2
More informationInstallation & Assembly: Two Piece Suspended Ceiling Plate
Installation & ssembly: Two Piece Suspended Ceiling Plate Model: CMJ453 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112
More informationSafety Awareness Barriers
INSTALLATION INSTRUCTIONS FOR These safety awareness barriers are ideal for use in the manufacturing industry to provide a physical and visual means to warn people that hazards exist beyond the barrier.
More informationInstallation & Assembly: Suspended Ceiling Kit
Installation & ssembly: Suspended Ceiling Kit Model: CMJ450 Max UL Load Capacity: 250 lb (113 kg) Compatible model/series* EC* EXT* DD* 2300 White Oak Circle urora, Il 60502 (800) 865-2112 Fax: (800) 359-6500
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationItem 550 Chain Link Fence
Item Chain Link Fence 1. DESCRIPTION 2. MATERIALS Furnish, install, remove, repair, or replace chain link fence and gates. Furnish certification from the chain link fence materials manufacturer stating
More informationInstallation Instructions
Installation Instructions HighRock 4x4 TM SlideAway TM Rear Bumper Vehicle Application: 1997-2006 Jeep Wrangler and Wrangler Unlimited HighRock 4x4 TM SlideAway TM Part Number: 42904 www.bestop.com - We
More information