HIPPITY, HOPPITY, HAPPITY AND BERIBBONED BUNNIES MOLD NUMBERS

Transcription

1 MAYCO OPAQUE STAINS AND TRANSLUCENTS USED ON THIS FLYER: SS-135 White, SS-45 Buttermilk, SS-212 Light Umber, SS-24 Chocolate Fudge, SS- 198 Chocolate, SS-234 Medium Mocha, SS-138 Flat Black, SS-132 Slate Gray, SS-130 Medium Gray, SS-192 Light Taupe, SS-151 Rich Rose, SS-353 Gray Blue, SS-339 Navy, SS-337 Dark Blue, SS-358 Dark Gray Blue, SS-356 Wedgwood Blue, SS- 353 Gray Blue, SS-13 Bluberri, SS-335 Rich Blue, SS- 104 Royal Plum SS-57 Accent Green, SS-276 Forest Green, SS-48 Artichoke, SS-272 Yellow Green, SS-19 Country Sage, SS-376 Limeburst, SS-111 Brightest Yellow, SS-254 Golden Ocher, SS-370 Deep Purple, SS-368 Dusty Violet and SS-28 Hushed Violet. MAYCO TRANLSUCENTS: TL-309 Golden Buckskin Twinkle and TL-310 Ginny Tan Twinkle MAYCO BRUSHES USED: AB-834 ¾ Basecoat, RB-138 3/8 Angled Shader, Various size RB and size 4, 6 & 8 round CB brushes, 10/0 Mini Liner CB 110, Script Liner CB 106, #4 Soft Fan CB-604, UB and round AB Drybrushes. NOTE!!: AFTER REMOVING CASTS FROM MOLD,CUT OUT AS DESIRED AND SLIP ATTACH ADD ONS AS DESIRED, PLACE A HOLE IN THE BACK FOR A PINCH SOCKET. ALLOW TO DRY, CAREFULLY CLEAN GREENWARE AND FIRE TO CONE O4. BE EXTREMELY AWARE OF THE CUT OUT AREA ESPECIALLY IN THE GREENWARE STAGE, ALL YOUR WORK CAN FALL APART FROM ONE MISPLACED THUMB!! IF YOU ARE USING AN AIRBRUSH TO APPLY YOUR BASECOAT, CAREFULLY STUFF THE INSIDE OF ANY BISQUE ITEM THAT HAS CUT OUTS WITH PAPER TOWEL. HIPPITY, HOPPITY, HAPPITY AND BERIBBONED BUNNIES 2966 Hippity Bunny 6 T x 5.5 W $ Hoppity Bunny 6 T x 4.75 W $ Happity Bunny 7 T x 4.5 W $ Beribboned Bunny 10.5 T x W $ Gangbuster Beribboned Bunny (3 per mold) 4.25 T x 4.5 W $ Post Nail and Welcome Sign 6.5 W x 3.25 T $22.00 MATERIALS NEEDED MISC: If desired, flowers made from Kemper flower punch tool and or handmade or purchased clay flowers (in the bridal section at Michaels) Landscape solar lighting. PREPARATION: Place holes in welcome sign for hanging. Allow to dry, carefully clean greenware and fire to cone 04. 1

2 BASECOAT: All bunnies with Chocolate Fudge. Welcome Sign with Slate Gray. ANTIQUE: All bunnies and welcome sign with Golden Buckskin Twinkle, wipe off excess with a soft cloth. DRYBRUSH: Bunnies as follows: 1 to 2 coats of Chocolate Fudge followed with 2 coats of Chocolate and Medium Mocha. Apply these colors much heavier to the beribboned bunny s belly, pads of feet and inside of ears and much lighter on all other areas. Continue with a coat of Light Umber and Light Taupe and a highlight coat of Buttermilk added to your brush. Again apply heavily to areas earlier mentioned. Using Rich Rose, blush cheeks, noses and insides of ears. Come back with Buttermilk on beribboned bunnies to tone down if necessary. Drybrush clay flowers as desired if applicable. Drybrush welcome sign with 2 coats of Slate Gray followed with 2 coats of Medium Gray, add White to your brush to highlight. Drybrush Gray Blue to the word Welcome, highlight with White. PAINT: Eyes using Rich Blue for the irises. Shade as desired using Chocolate Fudge. TRIPLE TREE STUMP 2801 TRIPLE TREE STUMP 12.5 T X 11 W $ TREE STUMP LIMB ATT. $10.00 BASECOAT: With Chocolate Fudge. DRYBRUSH: as follows: 1 to 2 coats of Chocolate followed with 2 to 3 coats of Medium Mocha, on bare wood areas only continue with Light Umber and Golden Ochre, highlight with Buttermilk added to your brush. SHADE: If desired shade stump using Black. GREEN WASH: If desired apply a green wash using a 1:1 mix of Limeburst and Brightest Yellow. Mix this with 1:1 with water. Over a sink with running water apply color to the entire post and signs using a fan brush and adding water to help it flow. Allow to dry undisturbed. VALENTINE HEART MOLD NUMBER 2974 Wedding/Valentine Heart 10 T x 11 W $60.00 PREPARATION: After removing cast from the mold, cut out as desired. If cutting out hearts, save the hearts and slip attach as shown or desired. Place holes in the lace edge as shown, in the front and back, make sure the holes line up and are large enough for a large eye needle to go through. About the size of a #3 Clay Lift tool. 2

3 Allow to dry, clean greenware and holes well (so it won t snag the ribbon) and fire to cone 04. BASECOAT: Basecoat heart using Rich Rose. ANTIQUE: With a 1:1 mix of Golden Buckskin and Ginny Tan Twinkle, wipe off excess with a soft cloth. Don t forget to antique inside the letters. DRYBRUSH: Heart with 2 to 3 coats of Rich Rose followed with 2 coats with Light Taupe added to your brush. Continue with 2 coats adding Buttermilk, lightly highlight with a small amount of White added to your brush. FINISH: Using a large eyed needle (Joann s Fabric and crafts in the knitting area) thread 1.25 ribbon through the lace edge of heart as shown. SHAMROCKS 2973 Gangbuster Shamrock Vase (3 per mold) 4 T x 3 W $ Shamrock 10 x 10 $55.00 PREPARATION: Glaze inside of Shamrock vase, fire to proper cone. BASECOAT: Shamrocks with Accent Green. ANTIQUE: With Golden Buckskin, wipe off excess with a soft cloth. Don t forget to antique inside the letters, use a clean brush to remove excess carefully from letters. DRYBRUSH: Two coats of Accent Green followed with 2 to 3 coats of Forest Green, continue with 2 to 3 coats of Artichoke. Adding Light Taupe to your brush begin to highlight center of the Shamrock, continue with Buttermilk added to your brush to highlight. FINISH: if desired, apply fine gold glitter as shown. WELCOME DRAGON, CHESHIRE DRAGON AND DANDY DAISY ENT 2978 Welcome Magic Dragon T x W $ Turret Att. $ Cheshire Dragon 10.5 T x 7.5 W $ Dandy Daisy Ent 15 T x 9 W $ Welcome Base 13.5 W x 6 D $30.00 BASECOAT: Color to areas as follows: Slate Gray gray areas. Chocolate Fudge brown areas. Navy Blue blue and purple areas. Accent Green Cheshire Dragon s belly. Artichoke all other green areas. Rich Rose pink areas. Brightest Yellow yellow areas. 3

4 ANTIQUE: With Golden Buckskin, wipe off excess with a soft cloth. Don t forget to antique inside the letters, use a clean brush to remove excess carefully from letters. DRYBRUSH ENT AS FOLLOWS: 1 to 2 coats of Slate Gray to all gray areas, continue with 1 to 2 coats of Medium Gray, highlight with Light Gray. Drybrush teeth with Buttermilk followed lightly with White. Drybrush green areas of Ent with Artichoke followed with adding small amounts of Light Taupe and then Buttermilk to your brush to lighten and highlight. Drybrush mushrooms with Raw Umber and then Golden Ocher. Apply 2 coats of Rich Rose to daisies, blush cheeks lightly with Rich Rose, highlight daisies with Buttermilk and then White added to your brush. Drybrush flower centers with Brightest Yellow, highlight with Buttermilk and then White. Paint eyes using Rich Blue for the irises. DRYBRUSH WELCOME DRAGON AS FOLLOWS: 1 to 2 coats of Slate Gray to all gray areas, continue with 1 to 2 coats of Medium Gray, highlight with Light Gray. Drybrush the brown areas with these colors as follows, Chocolate Fudge, Chocolate, Medium Mocha and Light Umber. Highlight with Light Taupe and then Buttermilk added to your brush. Drybrush Blue area of dragon with Navy Blue, Dark Blue, Dark Gray Blue and Wedgwood, highlight with Gray Blue and Bluberri. Blush cheeks with Rich Rose. Drybrush base with Artichoke followed with Yellow Green. Paint teeth White and claws black. DRYBRUSH CHESHIRE DRAGON AS FOLLOWS: Drybrush belly as follows: Accent Green, Forest Green, Country Sage, Limeburst, Brightest Yellow, Buttermilk and White. Purple areas with Navy Blue, Royal Plum, Deep Purple, Dusty Violet and Hushed Violet. Drybrush teeth lightly with Buttermilk and then White. Blush cheeks lightly with Rich Rose. Paint eyes using Forest Green for the irises. Paint claws Black. VOLLEYBALL, BASEBALL, GANGBUSTER ELEPHANT AND HEART VASE 2971 Gangbuster Elephant (3 per mold) 5 T x 4 W $ Gangbuster Heart Vase (3 per mold) 4 T x 3.75 W $ Volleyball 9 T x 7.5 W $ Baseball 8.5 T x 7.5 W $70.00 MAYCO STROKE AND COATS: SC-70 Pink a Dot, SC-74 Hot Tamale, SC-16 Cotton Tail, SC-60 Silver Lining, SC-1 Pink a Boo, SC-36 Irish Luck, SC-35 Gray Hare, SC-15 Tuxedo and SC-5 Tiger Tail. APPLY COLOR: Using a soft fan or script liner apply 2 coats of Cotton Tail to white areas. 4 coats of Pink a Boo to pink areas of heart vase. Apply all other colors as shown with desired coats for desired coverage. Line baseball stitches with Gray Hare. 4

5 APPLY CLEAR GLAZE: If desired, dip pieces in Mayco s Clear Dipping. Clear glaze inside of Heart vase. Fire to cone 06. MOLDS BY CLAY MAGIC INC. P.O. BOX 148 ROCKWOOD, MI Ph. (734) FAX (734) COLOR AND BRUSHES BY MAYCO COLORAMICS LLC WEAVER COURT SOUTH HILLIARD, OHIO PHONE: (614) FAX (614)