Class outline WELCOME TO: ARCH 2430,
|
|
- Neal Joseph Sherman
- 6 years ago
- Views:
Transcription
1 Week 6 Class 11 Class outline WELCOME TO:, BUILDING TECHNOLOGY IV Class discussion Case study [Basket Apartments in Paris] Example drawing set Submittal I Review Building façade draft research is due next class Revit to Rhino to Revit Review structural posts on open lab Basket Apartments in Paris / OFIS architects Architects: OFIS architects Prepared by; Alexander Aptekar a.si/str_9%20 %20HOUSING/7_PARIS_STUDENT_APARTMENTS/ofis_PARIS_STUDENT_APARTMENTS.html 1
2 Basket Apartments in Paris Architects: OFIS architects Prepared by; Alexander Aptekar 2014 Cite: Cifuentes, Fabian. "Basket Apartments in Paris / OFIS architects" 09 Oct ArchDaily. Accessed 09 Oct < 2
3 3
4 Many architects create a cartoon version of the working drawings they intend to produce prior to beginning actual work. They use the cartoon set to identify the scope of work required and to organize the drawings. The cartoon set is traditionally static. It provides a model or a roadmap for the actual drawings, but is rarely used for anything else. Drawing Sheet List Material Legend Graphic Symbols Abbreviations Site Plan Set Out Geometry 4
5 Plan Geometry Plans Plans Elevations Elevations Sections 5
6 Sections Sections Sections Details Details Details 6
7 7
8 Exporting Info From Revit Week 6 Class 11 Class outline Class discussion Review structural posts on open lab Case study [Pierres Vives Building] Submittal requirements list Collaboration techniques Previous students projects Rhino model Team discussions Divide up building Select rhino element Submission 1 review over the weekend Week 6 Class 11 Class outline Class discussion Review structural posts on open lab Case study [Pierres Vives Building] Submittal requirements list Collaboration techniques Previous students projects Rhino model Team discussions Divide up building Select rhino element Submission 1 review over the weekend 8
9 9
10 Week 6 Class 11 Class outline Class discussion Review structural posts on open lab Case study [Pierres Vives Building] Submittal requirements list Collaboration techniques Previous students projects Rhino model Team discussions Divide up building Select rhino element Submission 1 review over the weekend 10
11 Create Water Tight Geometry Select Geometry Export Selected Save As SAT New Conceptual Mass 11
12 Insert Import CAD Place At Level 1 Center To Center Load Into Project 12
13 Theory: Revit has many different ways of displaying information about the model. Here you will see some of display settings which will assist a working drawings set. Lab: a. Architectural vs. Structural elements b. Detail levels c. Visual styles d. Template Working Drawings Display Settings Architectural vs. Structural elements 1 2 Within Revit elements have different levels of importance for different teams. An example is structural wall vs. an architectural wall. 1. In the properties of the wall a wall can be designated as a structural wall so that it will show up on a structural plan. repared by; Tyheem Joiner 3 2. To turn a plan into a structural plan, on the property panel for that view go to the discipline and select structural. Now only walls labeled as structural will show up. 3. Any additional items that need to be hidden can be turned of by going to Wall detail levels Detail level Visual styles Coarse Medium or fine Plan view, any detail level Medium Fine Coarse Component with detail levels specified The detail level specify how much information is shown ranging from coarse to fine. Coarse show the least amount of detail and fine showing the most. Some components are created to react differently to different detail levels. Walls show the outer boundary in coarse detail level and show the inner layers in medium or fine detail level. This is useful when trying to conserve memory or when a lot of detail is lost Wireframe Displays the model as a wireframe only 13
14 Visual styles Hidden Line Displays the model as a linework to define geometry Visual styles Shaded Displays the model as shaded color geometry only Visual styles Consistent Colors Displays faces of elements in flat color; faces of elements that are oriented at different angles to the camera will display in the same shaded color. Visual styles Realistic Elements that have material definitions assigned will display texture maps in real time. Ray Trace Real Time rendering of view using Revit s raytrace engine. Realistic Raytrace View Templates View Templates A view template is a collection of view properties, such as view scale, discipline, detail level, and visibility settings, that are common for a view type (such as plan or elevation). You specify the value for each property in the template. You can also exclude properties from a view template, Excluded properties do not require a value and are not overridden when you apply a view template. Once a template is created we can apply it to view by Once a template is created we can apply it to view by going to the project browser Selecting the views we want to apply the template to and right clicking on the view to select apply view template. Then, select, edit or create a new view template and click apply. 14
15 Project Structure Revit Families (.rfa) Sheet File Program Massing File Zoning Massing File Beam File Column File Slab File Project File Basket Apartments in Paris Architects: OFIS architects Prepared by; Alexander Aptekar 2014 Cite: Cifuentes, Fabian. "Basket Apartments in Paris / OFIS architects" 09 Oct ArchDaily. Accessed 09 Oct < 15
Ribbon (Panels) + Options Bar + Contextual Tabs (tools based on selection)
Week 11 Revit, Basics Building Information Modeling (BIM) - Parametric 3D Model File Types: Projects RVT (template = RTE) Families - RFA (template = RFT), "Symbols" Layout Workspace - Elevation Markers
More informationAutoCAD Architecture 2014
CADLearning for AutoCAD Architecture 2014 Course Details 19+ hours of training 325 video tutorials Exercise files included Instructor: Reid Addis Course Description CADLearning for AutoCAD Architecture
More informationAutodesk Revit Architecture 2014
ISI ACADEMY Autodesk Revit Architecture 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Managing User Interface Understanding
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationBIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010
BIM e Submission Guideline Structural Annex 1a Recommended Process Revit 2010 Building and Construction Authority 5 Maxwell Road #16-00 Tower Block MND Complex Singapore 069110 www.bca.gov.sg Revision
More informationA Quick Spin on Autodesk Revit Building
11/28/2005-3:00 pm - 4:30 pm Room:Americas Seminar [Lab] (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida A Quick Spin on Autodesk Revit Building Amy Fietkau - Autodesk and John Jansen;
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationRevit Revit A step by step guide. 11/14/2011 jimmy boone
Revit 2012 Revit A step by step guide 11/14/2011 jimmy boone Contents Environment settings... 4 Setting up a new MEP models... 5 Step 1, beginning from an architectural model... 5 Step 2 (if using a separate
More informationAutodesk Revit Architecture 2014
CADLearning for Autodesk Revit Architecture 2014 Course Details 52+ hours of training 534 video tutorials Exercise files included Instructor: Jason Boehning Course Description CADLearning for Autodesk
More informationMODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS
MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS WHAT S INSIDE INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 1 OVERVIEW 1 SETTING UP LAYERS AND CLASSES 1 CREATING OBJECT
More informationAutodesk Revit MEP Learning Essentials Training Course Outline
Module 00 Revit in a Nutshell Interactive exercise on creating and documenting a basic building Module 01 Introduction to the Principles of BIM Simple Truths Behind the hype The benefits of BIM What will
More informationMODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS
MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS TABLE OF CONTENTS INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 2 OVERVIEW 2 SETTING UP LAYERS AND CLASSES 2 CREATING
More informationMETAL FRAMING Wall+ SHOP DRAWINGS
METAL FRAMING Wall+ SHOP DRAWINGS Shop Drawings Finish your modeling with built-in shop drawing generator and deliver your wall framing estimation the same hour. Build your complete shop drawings with
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationRevit Architecture Student Workbook
Revit Architecture Student Workbook Building Information Modeling with Revit Architecture Contents Introduction... 5 Unit 1... 9 Theory: CAD Versus BIM... 9 Revit Architecture: Introduction, Interface,
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationA Productivity Comparison of AutoCAD and AutoCAD Architecture Software
AUTODCAD ARCHITECTURE A Productivity Comparison of and Software provides the best software-based design and documentation productivity for architects. This study details productivity gains over in designing
More informationAECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated
AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create
More informationEG1003 Help and How To s: Revit Tutorial
EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,
More informationAutodesk Revit MEP 2014
ISI ACADEMY Autodesk Revit MEP 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Components Managing User Interface Components
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationGetting Started with Revit
AUTODESK Autodesk REVIT Revit TRAINING Training TUTORIAL Tutorial Getting Started with Revit FOCUS Focus KUWAIT Kuwait CAD Cad Team 2012-13 Step 01 02 Grid & levels Grid create 5 vertical grid lines grid
More informationOptimizing Digital Drawing Files and BIM Models for Measurement and Estimating
Optimizing Digital Drawing Files and BIM Models for Measurement and Estimating Simon Lovegrove MRICS, AAIQS - Exactal CM4228 Drawing file formats issued for measurement and estimating purposes range from
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationACAD-BAU TUTORIAL For BricsCAD platform
ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.
More informationRIT CAD Specifications
RIT CAD Specifications The design team shall provide RIT with Revit, AutoCAD, and PDF files that capture the construction conditions of the associated project. This document outlines requirements for submitting
More informationFundamentals for building Drawing
Fundamentals for building Drawing What is Drawing Introduction Knowledge of preparing and understanding drawing will prove to be an invaluable aid while performing their jobs effectively, efficiently.
More informationMontana Association of Registered Land Surveyors Conference 2013
AutoCAD CIVIL 3D Survey Features - Field to Finish This session is an introduction to the Civil 3D Survey Tools. We will cover some basics of working with Survey Databases and Automated Linework. We will
More informationBuilding Construction Details Practical Drawings Pdf
Building Construction Details Practical Drawings Pdf This pioneering textbook details how construction drawings are used to implement Understanding Construction Drawings for Housing and Small Buildings
More informationMaking a Custom Symbol. Making a Custom Symbol in Chief Architect
TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult
More informationDesign for fireplace setting by Ross Ubergang rossu.com.au. gcadplus User Guide v gcad +
This chapter focuses on the use of common drawing tools needed to create typical landscape drawings. You will learn to use these draw tools by making an accurate, full-size model of a proposal for a space
More informationMaterially Speaking: Autodesk Architectural Desktop and VIZ Render
11/30/2005-3:00 pm - 4:30 pm Room:N. Hemispheres (Salon E1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Materially Speaking: Autodesk Architectural Desktop and VIZ Render Kirk
More informationContents OVERVIEW INTRODUCTION TO CHIEF ARCHITECT GETTING READY TO DRAW QUICK START VACATION CABIN: FLOOR PLAN. How this Book is Put Together
Contents OVERVIEW How this Book is Put Together Conventions Icon Key Files on the Website INTRODUCTION TO CHIEF ARCHITECT The Chief Architect Interface Working with the Toolbars Chief Architect s Views
More informationArchitect. Architect.
The The line line sketch sketch with with modified modified height height for for plinth plinth floor floor is is displayed. displayed. Open Open Architectural Architectural plan plan file, file, which
More informationBeginning Engineering Graphics 3 rd Week Lecture Notes Instructor: Edward N. Locke Topic: The Coordinate System, Types of Drawings and Orthographic
Beginning Engineering Graphics 3 rd Week Lecture Notes Instructor: Edward N. Locke Topic: The Coordinate System, Types of Drawings and Orthographic 1 st Subject: The Cartesian Coordinate System The Cartesian
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More informationUniversity of Colorado, College Architecture and Planning. M:
BIM is for Interface I is for interface: the warm up. Of course I stands for information in BIM, the first assignment however is meant to serve as a warm up and general orientation of the program and it
More informationCreo Parametric 4.0 Basic Design
Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationARCH 2000: Visual Thinking A
Calendar Description Fall 2015 Class Time: Friday, 2:00pm to 5:00pm Room: D414 MacDonald Building, Sexton Campus Course Instructor: Ken Kam Course T.A.: TBA Office: HA-15 (Ralph M. Medjuck Building) Contact:
More informationAUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style
AUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style Donnia Tabor-Hanson Cope Architecture AB3279 After many years of having a successful Autodesk University class on AUGI tips and tricks featuring
More informationAutodesk Architectural Desktop Functionality for the Autodesk Building Systems User
11/28/2005-1:00 pm - 2:30 pm Room:N. Hemispheres (Salon A1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Architectural Desktop Functionality for the Autodesk Building Systems
More informationREADING ARCHITECTURAL PLANS
READING ARCHITECTURAL PLANS ARCHITECTURAL DRAWINGS FOR A HOUSE Architectural drawings contain information about the size, shape, and location of all parts of the house ARCHITECTURAL DRAWINGS FOR A HOUSE
More informationDimension Below are the critical settings in AutoCAD. Other software should follow the same settings.
8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff
More informationUDS OVERVIEW Uniform Drawing System
UDS OVERVIEW Uniform Drawing System The Construction Specifications Institute 601 Madison Street Alexandria, VA 1994 CSI began development of UDS Organization and presentation of drawing sets Organization
More informationAutodesk Inventor LT. Easy as 1, 2, 3D.
Autodesk Inventor LT Easy as 1, 2, 3D. Model Your Part Designs in 3D With parametric 3D solid part modeling in Autodesk Inventor LT software, you can model your part designs in 3D instead of simply drawing
More informationAssessment: Course Four Column Fall 2017
Assessment: Course Four Column Fall 2017 El Camino: (IND) - Architecture ECC: ARCH 104:History of Western Architecture SLO #2 Architectural Styles - Students Essay/Written Assignment - xx will be able
More information1Getting set up to start this exercise
AutoCAD Architectural DesktopTM 2.0 - Development Guide EXERCISE 1 Creating a Foundation Plan and getting an overview of how this program functions. Contents: Getting set up to start this exercise ----
More informationCOPYRIGHTED MATERIAL. Welcome to the Civil 3D Environment
Welcome to the Civil 3D Environment Chapter 1 To paraphrase, Civil 3D isn t your father s AutoCAD. If you re just getting into the Civil 3D environment, want to learn how to get around in models, and would
More informationZooming in on Architectural Desktop Layouts Alexander L. Wood
December 2-5, 2003 MGM Grand Hotel Las Vegas Alexander L. Wood Code BD41-3L Take advantage of both AutoCAD and Autodesk Architectural Desktop Layout features. We'll look at the basics of setting up AutoCAD
More informationPrecast Concrete Industry Extensions for Autodesk Revit Structure 2014
Precast Concrete Industry Extensions for Autodesk Revit Structure 2014 Reinhard Lackner Managing Director - IDAT Join us on Twitter: #AU2013 Class summary This class shows how extensions to Autodesk Revit
More informationCBCL Limited Sheet Set Manager Tutorial 2013 REV. 02. CBCL Design Management & Best CAD Practices. Our Vision
CBCL Limited Sheet Set Manager Tutorial CBCL Design Management & Best CAD Practices 2013 REV. 02 Our Vision To be the most respected and successful Atlantic Canada based employeeowned firm, delivering
More informationBegin this assignment by first creating a new Java Project called Assignment 5.There is only one part to this assignment.
CSCI 2311, Spring 2013 Programming Assignment 5 The program is due Sunday, March 3 by midnight. Overview of Assignment Begin this assignment by first creating a new Java Project called Assignment 5.There
More informationProgramme TOC. CONNECT Platform CONNECTION Client MicroStation CONNECT Edition i-models what is comming
Bentley CONNECT CONNECT Platform MicroStation CONNECT Edition 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated Programme TOC CONNECT Platform CONNECTION Client MicroStation
More informationSession 3 _ Part A Effective Coordination with Revit Models
Session 3 _ Part A Effective Coordination with Revit Models Class Description Effective coordination relies upon a measured strategic approach to using clash detection software. This class will share best
More informationFAÇADES 2 - CT Assignment (circa 30 hours)
FAÇADES 2 - CT 4211 Assignment 1 2008 (circa 30 hours) Introduction The pictures and drawings below show a recently finished building for Stichting De Hoop in Dordrecht (Netherlands), in use as an education
More informationThe Remodel Project For ArchiCAD 15 Part 4
The Remodel Project For ArchiCAD 15 Part 4 Permission to Copy or modify The CAD Academy We don t need a complete set of drawings to show our proposed addition to the CLIENT. What is really great about
More informationAutodesk Revit MEP Fundamentals
Autodesk Revit MEP Fundamentals Course Length: 4 days To take full advantage of Building Information Modeling, the Autodesk Revit MEP: Fundamentals training course has been designed to teach the concepts
More informationBIM & Emerging Technologies. Disrupting Design process & Construction
BIM & Emerging Technologies Disrupting Design process & Construction Introduction Introduction - BIM Disrupting the Construction Introduction Design Major disruption already in various parts of the World
More informationAS10690 Revit Master Class Building Construction Ready Curtain Walls
AS10690 Revit Master Class Building Construction Ready Curtain Walls Matt Stachoni BIM Specialist, Microsol Resources Twitter: @MattStachoni Join the conversation #AU2015 Class summary Curtain walls represent
More information11.0 INSTRUMENTATION LOOP DIAGRAMS
11.0 INSTRUMENTATION LOOP DIAGRAMS Table of Contents 11.0 INSTRUMENTATION LOOP DIAGRAMS... 11-1 11.1 HISTORY OF CHANGE... 11-2 11.2 INSTRUMENT LOOP DIAGRAMS (ILD)... 11-4 11.2.1 Drawing Content... 11-4
More informationModule 1: Building Model Creation
INSTRUCTIONAL MODULES DEMONSTRATING BUILDING ENERGY ANALYSIS USING A BUILDING INFORMATION MODEL Christian Daniel Douglass Industrial and Enterprise Systems Engineering December 1, 2010 Module Summary In
More informationEnvironmental Design. Floor Plan. Planometric Drawing. Target Audience. Media. Materials
Environmental Design The design of large-scale aspects of the environment by means of architecture, interior design, way-finding, landscape architecture, etc. Floor Plan A scale diagram of the arrangement
More informationWorking with Detail Components and Managing DetailsChapter1:
Chapter 1 Working with Detail Components and Managing DetailsChapter1: In this chapter, you learn how to use a combination of sketch lines, imported CAD drawings, and predrawn 2D details to create 2D detail
More informationOF LEVELS & ADJUSTMENTS TO THE GRID. Bldg: Levels. PROF. PAUL C. KING RA New York City College of Technology. Learning Community.
Bldg: Levels DEVELOPMENT OF LEVELS & ADJUSTMENTS TO THE GRID Overview: The existing drawing includes 2 levels set 10' apart. For the Lab Building we need to createe a total of 6 levels with a vertical
More informationParametric Design 1
Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students
More informationAutodesk University See What You Want to See in Revit 2016
Autodesk University See What You Want to See in Revit 2016 Let's get going. A little bit about me. I do have a degree in architecture from Texas A&M University. I practiced 25 years in the AEC industry.
More informationInserting and Creating ImagesChapter1:
Inserting and Creating ImagesChapter1: Chapter 1 In this chapter, you learn to work with raster images, including inserting and managing existing images and creating new ones. By scanning paper drawings
More informationPreparing for a Career in Architecture
Preparing for a Career in Architecture Name: Date: References: Architecture: Residential Drafting and Design (Chapter 03) at http://www.g wonlinetextbooks.com/. ***Use the classroom Username and Password
More informationRelease Notes - Fixes in Tekla Structures 2016i PR1
Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups
More informationArt III. Fine Arts Curriculum Framework. Revised 2008
Art III Fine Arts Curriculum Framework Revised 2008 Course Title: Art III Course/Unit Credit: 1 Course Number: Teacher Licensure: Grades: 9-12 Art III Art III is a two-semester course designed for students
More informationMechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationCOMPUTER AIDED DESIGN 40
COMPUTER AIDED DESIGN 40 Students can pursue an emphasis on any 1 of 3 disciplines: Architecture, Engineering Design, or Animation Description This course expands on the advanced skills learned in previous
More informationListed below are the competencies required and examples from the aforementioned job:
1. Technical Analysis Instructions: Describe a project for which you collected and interpreted or analyzed technical data for development of engineering designs and drawings from concepts and specifications.
More informationWhat's New in Autodesk Architectural Desktop 2004? Kelcey Lemon
December 2-5, 2003 MGM Grand Hotel Las Vegas What's New in Autodesk Architectural Desktop 2004? Kelcey Lemon BD31-5L Autodesk Architectural Desktop 2004 has well over 300 new features and enhancements.
More informationBIM/VDC on TAA Projects:
2018 Logan International Airport BIM/VDC on TAA Projects: Direct Tenant TAA Projects Third Party Development Properties Massachusetts Port Authority Capital Programs & Environmental Affairs Preface Massport
More information1 classroom hour, 2 lab/studio hours, 2 credits
VISUAL STUDIES I 1 classroom hour, 2 lab/studio hours, 2 credits Course Description: Visual Studies I is taken in tandem with ARCH 1110: Architectural Design I: Foundations to introduce the language of
More informationClassical Viewing. Ed Angel Professor of Computer Science, Electrical and Computer Engineering, and Media Arts University of New Mexico
Classical Viewing Ed Angel Professor of Computer Science, Electrical and Computer Engineering, and Media Arts University of New Mexico 1 Objectives Introduce the classical views Compare and contrast image
More informationRelease Notes - Fixes in Tekla Structures 2016i SP1
Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the
More informationComputer Aided Design I
Black Horse Pike Regional School District 580 Erial Road, Blackwood, NJ 08012 Computer Aided Design I COURSE OF STUDY Technology Department Written by: Ken Whalen, Steve Arena and Vince Mannino Date: May
More informationArchitectural Design Process
Architectural Design Process Custom Residential A. Schematic Design Phase Pre-Design Meeting Site Analysis Site Survey Conceptual Design & Project Scope Design Program Guideline Project Team Formation
More informationISO INTERNATIONAL STANDARD. Technical product documentation Digital product definition data practices
INTERNATIONAL STANDARD ISO 16792 First edition 2006-12-15 Technical product documentation Digital product definition data practices Documentation technique de produits Données de définition d'un produit
More informationDepartment of Architectural Technology Spring 2018
Department of Architectural Technology Spring 2018 ARCH 2431 BUILDING TECHNOLOGY III 1 lecture hours and 6 lab/studio hours, 4 credits Course Description: Course focus is on steel construction. This course
More informationDrafting & Design Technology
131 Location: Library Tower - 2nd Floor Program Information Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and ability of highly skilled
More information84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don
Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions.
More informationPrerequisites: ARCH 1230: Building Technology II with a grade of C or higher or ARCH 1240 and ARCH1200 with a grade of C or higher.
New York City College of Technology City University of New York 300 Jay Street, Brooklyn, New York 11201 Department of Architectural Technology ARCH 2330 BUILDING TECHNOLOGY III 1 cl hrs, 6 lab hrs, 4
More informationProConcrete. Gernot Jeromin Product Manager Bentley Systems, Incorporated
ProConcrete Gernot Jeromin Product Manager ProConcrete 3D CAD Software for Concrete and Reinforcement 2 WWW.BENTLEY.COM What is ProConcrete AutoCAD Application MicroStation V8i version will be available
More informationRhinoCAM & Architectural Design Meet Head-On!
RhinoCAM & Architectural Design Meet Head-On! Company Background LMN Architects, located in Seattle Washington, began as a small architectural firm 35 years ago and has since grown to employ over 130 professionals
More informationBuilding Standards Department. Markham eplan Submission Standards For Building Permits, Sign Permits and Zoning Preliminary Review
Markham eplan Submission Standards For Building Permits, Sign Permits and Zoning Preliminary Review eplan Submission Standards Building Standards February 2018 SUBMISSION STANDARDS PREPARING YOUR ELECTRONIC
More informationCalculation of precast elements as an introduction to BIM
Building Information Modelling BIM Calculation of precast elements as an introduction to BIM BIM is the integrated process of planning, building and managing, supported by a consistent digital building
More informationB.Digital graphics. Color Models. Image Data. RGB (the additive color model) CYMK (the subtractive color model)
Image Data Color Models RGB (the additive color model) CYMK (the subtractive color model) Pixel Data Color Depth Every pixel is assigned to one specific color. The amount of data stored for every pixel,
More informationCreate a Simple Architectural Structure (Architectural CAD)
Description In this activity the teacher will demonstrate how to transform the 2D floor plan into a 3D structure, using the plan created in the Drawing of a Simple Building activity. Lesson Objectives
More informationChapter 7 Computer-Aided Design and Drafting in Architecture 2D vs. 3D 3 Advantages/ Disadvantages
Chapter 7 Computer-Aided Design and Drafting in Architecture 2D vs. 3D 3 Advantages/ Disadvantages What is CADD or CAD CADD- CAD- BIM- What does BIM require? Intro to CADD & BIM 1 Autodesk AutoCAD REVIT
More informationMaterials Tutorial. Chapter 6: Setting Materials Defaults
Setting Materials Defaults Chapter 6: Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material
More informationModeling 2. Draw Storefront Curtain Wall. Align. Draw Storefront Curtain Wall
STEP 1: Back to your Revit fi le _ from the Project Browser double-click on Level 1 _ type shortcut WA (wall) _ set the type of wall to Storefront _ draw a curtain wall on the South Wall as shown in image
More informationVIRTUAL REALITY TECHNOLOGY APPLIED IN CIVIL ENGINEERING EDUCATION: VISUAL SIMULATION OF CONSTRUCTION PROCESSES
VIRTUAL REALITY TECHNOLOGY APPLIED IN CIVIL ENGINEERING EDUCATION: VISUAL SIMULATION OF CONSTRUCTION PROCESSES Alcínia Z. Sampaio 1, Pedro G. Henriques 2 and Pedro S. Ferreira 3 Dep. of Civil Engineering
More informationinvestigating characteristics and the display of TOMS ozone data
exercise 1: investigating characteristics and the display of TOMS ozone data 1 exercise 1 investigating characteristics and the display of TOMS ozone data Before working with any set of data it is important
More informationDeck Tutorial. Decks and Porches. Drawing Decks
Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.
More informationDrawing a Foundation or Basement Plan
Appendix F Drawing a Foundation or Basement Plan In this chapter, you will learn the following to World Class standards: Draw a Foundation or Basement Plan Draw the Basement Walls Draw the Pilasters on
More informationCAD Tutorial 24: Step by Step Guide
CAD TUTORIAL 24: Step by step CAD Tutorial 24: Step by Step Guide Level of Difficulty Time Approximately 40 50 minutes Lesson Objectives To understand the basic tools used in SketchUp. To understand the
More information