alitherm 300 ETC Alitherm 300 Standard Stay Technical Fabrication Manual JULY 2011 STANDARD STAY MANUAL Smart Architectural Aluminium

Size: px
Start display at page:

Download "alitherm 300 ETC Alitherm 300 Standard Stay Technical Fabrication Manual JULY 2011 STANDARD STAY MANUAL Smart Architectural Aluminium"

Transcription

1 alitherm 300 STANDARD STA ANUAL Smart Architectural Aluminium Alitherm 300 Standard Stay Technical Fabrication anual JUL 2011 Smart Systems Ltd 2011 ETC

2

3 ALITHER STANDARD STAS ONL ain Index ETC Index Index... Page 01 A ETC Profiles Specification Pages... Technical Information... Scale Profile Drawings... Page A02-A06 Page A07-A12 Page A13-A30 B ETC Accessories Photos & Drawings... Page B02-B24 C ETC Sections Scale Sections -... Page C02-C24 D ETC Statics Open Out... Page D02 E ETC Construction Drawings Standard Stays 1 - Corner Jointing... Page E02-E Drainage... Page E05-E Transom/ullion... Page E07-E Hinges... Page E Locking Hardware... Page E11-E Bead & Glazing... Page E14-E Coupling/Bay Poles. Page E17-E18 F ETC Sawing Tables Cutting Information - Standard Stays... Page F02-F03

4 Specification GENERAL DESCRIPTION The "Alitherm 300" window system described in this manual is suitable for both replacement windows for existing buildings, and for installation into new buildings. The system incorporates internally & externally beaded vent frames suitable for cockspur and shootbolt locking. The low line gaskets and extended polyamide thermal breaks help to provide excellent U Values and indow Energy Rating capable of achieving an 'A' Rating when used in conjunction with the correct double glazed unit Corner assembly of Alitherm 300 is crimping only. RECOENDED DESIGN LIITATIONS Top Hung Vents: aximum idth: 1400mm inimum idth: 350mm aximum Height: 1300mm inimum Height: 220mm aximum eight: 40kg Side Hung Vents: aximum idth: 700mm inimum idth: 400mm aximum Height: 1400mm inimum Height: 350mm aximum eight: 28kg

5 Specification PROFILE SPECIFICATION The window frame are constructed of aluminium alloy extrusion to BS EN and BS EN 12020, extruded from 6063 T6 alloy. The internal and external extrusions are separated with a polyamide thermal break. The external aluminium alloy extrusion is pre-treated and finished either:- a) Anodised to BS 3987: 1987, grade AA25 to a natural self colour. b) Polyester powder organic coating to BS Dual colour is available. GENERAL ANUFACTURING Outer and vent frames are made by cutting the frame profiles with accurate 45 mitred ends using Tungsten Carbide Tipped Saw Blades, operating at approximately 3000 rpm. The corners are joined using the Alitherm 300 crimping tools to form a cold forged corner joint (made by deforming small slugs of metal into the groove of the corner cleat). The ends of transoms and mullions are profiled to fit the frame and fixed using self-tapping screws with a silicone seal. On polyester powder coated finishes, great care should be taken to avoid getting gap sealer on visible surfaces and should be removed as soon as possible with a clean cloth. Care should be exercised when using products not supplied by Smart Systems Ltd as no responsibility can be accepted.

6 Specification INDO DRAINAGE As with all dry glazed systems, it is recommended that the window system is adequately drained and ventilated. Refer to drainage details in manual, if in doubt ask The Technical Department. In order to get maximum performance and weather resistance it is recommended that drips are used over all vents. OUTER FRAE ANUFACTURING INFORATION The outer frame members are cut with 45 mitred ends to the overall size required, measured to the longest point of the metal. Prior to corner crimping the centre line position of any transoms or mullions should be marked on the outer frame members. here the transom/mullion runs right through, it should be marked out on both jambs or head and cill members in pairs to ensure accurate alignment of the sections. Using the marked centre line, Drill the transom/mullion fixing holes using a 5mm dia. drill bit. Corners are formed by coating the cut faces to be joined with a suitable small gap sealer. Into the mitred corner insert the cleat glue and the required corner cleats and, where required, the aluminium corner chevrons. The two mitred ends are then brought together and crimped. The small gap sealer ensures a permanent joint and guards against the ingress of moisture and joint movement. After crimping the corner joint, special care should be taken to ensure any excess sealer is removed from painted surfaces. Transoms or mullions are cut with square ends to the sizes calculated on the cutting formula sheets. The ends are then profiled to allow them to fit into the outer frame. Special tooling is available on request to profile the end of transom/mullion. Prior to fixing of transoms and mullions smear the cut ends with a suitable gap sealer. After fixing, special care should be taken to ensure any excess is cleared from painted surfaces.

7 Specification VENT Corners are formed by coating the cut faces to be joined with a suitable gap sealer. In the mitred corner insert the cleat glue and the required corner cleats and chevrons. The mitred ends are then brought together and crimped. The small gap sealer ensures a permanent joint and guards against the ingress of moisture and joint movement. Care should be taken to ensure any excess sealer is removed from the surfaces. The cutting sizes produce vent frames with a cavity of 13mm. hen fixing, the friction stays into both the outer and vent frame, care should be taken to ensure that holes are located on 'V' grooves in the aluminium extrusions. INTERNALL BEADED ADAPTOR FRAE The internally beaded adaptor frame members are cut with 45 mitred ends to the overall size required, measured to the longest point of metal. Care should be taken when measuring and cutting the frame members as only nominal clearance is required when the assembled frame is fixed in the outer frame. Corners are formed by coating the cut faces to be joined with a suitable small gap sealer. Into the mitred corner insert the cleat glue and a corner cleat and the required corner chevrons. The small gap sealer ensures a permanent joint and guards against the ingress of moisture and joint movements. Care should be taken to ensure any excess sealer is removed from painted surfaces.

8 Specification ULTI-POINT LOCKING The vent should be prepped for the locking mechanism prior to fabrication and fitted into vent before hanging. Stainless steel fixing should be used for securing the locking mechanism and keeps in position. TOP HUNG VENTILATORS HEN USING COCKSPUR HANDLES If the width of the ventilator frame is less then 750mm, fit one handle. If the width of the ventilator is greater than 750mm, fit two handles. SIDE HUNG VENTILATORS HEN USING COCKSPUR HANDLES If the height of the ventilator frame is less than 750mm, fit one handle. If the height of the ventilator is greater than 750mm, fit two handles. GLAING All beads are cut to suit the glazing aperture on the fully assembled window for glazing either at factory or on site as required. INTERNALL BEADED GLAING Glazing beads are fitted to openings by cutting the horizontal beads square to head and cill of each vent and fixed light area. Vertical beads are cut square at both ends. Insert bottom beads and two setting blocks to ensure glass will be centralised in vertical dimension of opening (glazing blocks must be full width of cavity to fully support glass or sealed unit), then insert top bead followed by side beads. Finish glazing by insertion of internal gaskets all round. For maximum weather performance, apply silicone to the full width of the bottom bead and 100mm up from the bottom of the vertical beads. Alitherm 300 indow eather Performance (BS6375) BS EN 1026: 2000 Air Permeability: BS EN 1027: 2000 atertightness: BS EN 12211: 2000 Resistance to ind Load: Class 4 600Pa Class E 1200Pa Class E 2400Pa Alitherm 300 indow U Values Contact The Technical Department

9 Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F ETC157 A B A ETC158 A B A A B ETC178 A A B ETC179 A ETC273 & A21 A ETC307 A B A ETC308 A B A A B ETC309 A A B ETC310 A A = Outside B = Inside GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour

10 Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F ETC313 A B 58 A ETC316 A B A ETC317 A B A ETC420 A B A ETC321 A B A A B ETC323 A A B ETC324 A ETC326 A B A ETC327 A B A A = Outside B = Inside GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour

11 Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F ETC328 A B A ETC329 A B A A B ETC333 A A B ETC334 A ETC335 A B A ETC344 A B A ETC345 A B A ETC346 A B A B ETC A A A = Outside B = Inside GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour

12 Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F B ETC348 A A ETC350 B A26 31 A ETC353 A B A A B ETC A A B ETC358 A A ETC B A ETC A ETC366 A ETC367 & A21 A A = Outside B = Inside GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour

13 Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F ETC A ETC A ETC372 A ETC373 A ETC374 A ETC375 A ETC515 A B A ETC A ETD351 A A A = Outside B = Inside GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour

14 Number Picture Page Perim. mm ec. mm lx(cm4) ly(cm4) wx(cm3) wy(cm3) Length Pack pr. F UTL A ETD330 A B A & B may be reversed A VL72 A A = Outside B = Inside GO = Gold = hite = Black F = ill Finish = Silver Anodised = Basic Colour = Special Colour = Dual Colour

15 Primary Visible Side Secondary Visible Side ETC307 Short Leg Square Outerframe 26 ACET310 ACET ETC308 Curtain all Outerframe ACET310 ETC309 Long Leg Ovolo Outerframe ACET310 ACET CA106 CA Scale 1:1

16 Primary Visible Side Secondary Visible Side ETC310 Long Leg Outerframe 32.5 ACET ETC313 Short Leg Outerframe ACET Scale 1:1

17 Primary Visible Side Secondary Visible Side ETC316 Ovolo Outerframe 32.5 ACET310 ACET ETC317 Square Outerframe 32.5 ACET310 ACET Scale 1:1

18 Primary Visible Side Secondary Visible Side ETC420 Vent (Cockspur Locking Only) /Odd Leg Outerframe 32.5 ACET ETC321 Chamfered Vent 32.5 ACET321 ACET ETC323 Chamfered Vent ACET ACET044 ACET Scale 1:1

19 Primary Visible Side Secondary Visible Side ETC324 Vent / Dummy Vent ACET824 ACET AC20024 ACET ETC326 Chamfered Vent ACET ACET323 ETC327 Ovolo Vent 62 ACET ACET Scale 1:1

20 Primary Visible Side Secondary Visible Side ETC328 Vent ETC366 (28mm only) 32.5 AC20017 ACET ETC329 Ovolo Vent ACET ACET Scale 1:1

21 Primary Visible Side Secondary Visible Side ETC333 Transom / ullion with Screwports ETC334 Reinforced Transom / ullion with Screwports ETC335 ide Transom / ullion with Screwports Scale 1:1

22 Primary Visible Side Secondary Visible Side ACET344 ETC344 Dummy Vent 52 ETC345 Dummy Vent ACET044 ACET044 ETC372 (28mm Glazing) ETC373 (28mm Glazing) ACET ETC346 Dummy Vent ETC372 (24mm Glazing) ACET044 ACET Scale 1:1

23 Primary Visible Side Secondary Visible Side 24mm Glazing External ETC307 ETC420 ETC308 ETC321 ETC309 ETC327 ETC310 ETC333 ETC313 ETC334 ETC316 ETC335 ETC317 ETC ETC mm Glazing 24mm Glazing Internal 31 24mm Glazing ETC ETC ETC mm Glazing ETC ETC326 ETC329 See Page E15 for Glazing Schedule Scale 1:1

24 Primary Visible Side Secondary Visible Side 28mm Glazing External ETC307 ETC420 ETC308 ETC321 ETC309 ETC327 ETC310 ETC333 ETC313 ETC334 ETC316 ETC335 ETC ETC ETC mm Glazing ETC mm Glazing 35 28mm Glazing ETC ETC ETC328 28mm Glazing Internal ETC324 ETC326 ETC329 See Page E16 for Glazing Schedule Scale 1:1

25 Primary Visible Side Secondary Visible Side End Cap ACET End Cap ACET258 ACET040 ACET ETC mm Cill 31 ETC mm Cill Scale 1:1

26 Primary Visible Side Secondary Visible Side End Cap ACET040 ACET179 End Cap TA ACET ETC178 85mm Cill 31 ETC179 NB:This Profile Only - REDUCED SCALE TO FIT 225mm Cill Scale 1:1

27 Primary Visible Side Secondary Visible Side ETC Corner Post ETC Corner Post Scale 1:1

28 Primary Visible Side Secondary Visible Side ETC350 Bay Pole Adaptor For ETC309 Only ETC353 Coupler Scale 1:1

29 Primary Visible Side Secondary Visible Side ETC357 Coupler ETC Head Extension 53 Scale 1:1

30 Primary Visible Side Secondary Visible Side ETC359 Frame Extension ETC869 Bay Pole Scale 1:1

31 Primary Visible Side Secondary Visible Side ETC515 Head Extension ETD351 Coupler (see E18) UTL VL72 End Caps: ACVL Scale 1:1

32 Primary Visible Side Secondary Visible Side ETD330 Transom to match ETD030 (Recommended for fixed lights only) ETD330 can be used with the outerframes shown in this manual providing the following beads & gasket are used in the midrail: 24mm = ETC362 with ACET841 gasket externally & AC20034 gasket internally 28mm = ETC361 with ACET841 gasket externally & AC20034 gasket internally ETD330 is recommended for fixed lights only.the friction hinges and keeps in this manual are not compatible with this section as standard. Scale 1:1

33 Section B

34 Image Part Code Pack Unit Application Colour ACDR052 No. 10 x 50 S/S Self Tapping Pan Head Screw 200 pack ETC348 F GO ACET824 Chevron 24 pack ETC324 F GO ACET040 Variable Angle Cill Joiner Drill Jig = HEJ050 Screws = HEA18SS 10 pack ETC157 ETC158 ETC178 ETC179 F GO ACET041 Cill Nose Bracket 1 each ETC157 ETC158 ETC179 F GO ACET044 Stainless Steel Chevron 100 pack ETC323 ETC326 ETC329 ETC344 ETC345 ETC346 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

35 Image Part Code Pack Unit Application Colour Stainless Steel Chevron 100 pack ETC310 ETC420 ETC321 ETC327 F GO ACET049 Corner Cleat 10 pack ETC309 ETC316 F GO ACET060 No. 7 x 25 S/S Self Tapping CSK Screw 100 pack ETC328 F GO ACET062 No. 10 x 50 S/S Self Tapping CSK Screw 100 pack ETC347 F GO ACET064 No. 8 x 16 S/S Self Tapping Pan Head Screw 100 pack Friction Hinges F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

36 Image Part Code Pack Unit Application Colour ACET066 No. 7 x 38 S/S Self Tapping CSK Screw 100 pack ETC331 ETC333 ETD330 F GO ACET068 No. 8 x 10 S/S Self Tapping Flange Screw 100 pack Friction Hinges F GO ACET069 5 x 12 S/S CSK achine Screw 100 pack ACET165 F GO ACET070 No. 8 x 13 S/S Self Tapping Flange Screw 100 pack Friction Hinges ETD351 F GO ACET075 End Cap 50 pack ETC334 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

37 Image Part Code Pack Unit Application Colour ACET080 Cockspur Handle 1 each ACET083 F GO ACET083 3mm edge 100 pack ACET080 F GO ACET093 Packers 25 pack ETC344 ETC345 ETC346 F GO ACET099 No. 8 x 19 S/S Self Tapping Flange Screw 100 pack Friction Hinges F GO ACET114 Anti-Twist Clip 100 pack ETC333 ETC334 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

38 Image Part Code Pack Unit Application Colour ACET125 Anti-Twist Clip 100 pack ETC335 F GO 200 ACET130 Galvanised Steel Fixing Strap 200mm x 25mm x 1.5mm 50 pack ETC307 ETC309 ETC310 ETC313 ETC316 ETC317 F GO ACET131 Drainage Cover Cap 100 pack F GO ACET165 Espagnolette Handle 9mm Spindle 1 each Shootbolt Locking F GO ACET171 Stainless Steel Chevron 100 pack ETC324 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

39 Image Part Code Pack Unit Application Colour ACET157 Cill End Cap 10 pair ETC157 F GO ACET179 Cill End Cap 10 pair ETC179 F GO ACET258 Cill End Cap 10 pair ETC158 F GO ACET310 Corner Cleat 24 pack ETC307 ETC308 ETC309 ETC310 ETC313 ETC316 ETC ACET311 Stainless Steel Chevron 50 pack ETC311 F GO F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

40 Image Part Code Pack Unit Application Colour ACET312 Foam Infill 1250mm Lengths 1 each ETC310 F GO ACET314 Foam Infill 1250mm Lengths 1 each ETC307 F GO ACET315 Foam Infill 1250mm Lengths 1 each ETC309 F GO ACET319 Foam Infill 1250mm Lengths 1 each ETC316 ETC317 F GO ACET pack Outer Corner Cleat ETC321 ETC327 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

41 Image Part Code Pack Unit Application Colour ACET322 Outer Corner Cleat 24 pack ETC323 ETC345 ETC346 F GO ACET323 Inner Corner Cleat 24 pack ETC323 ETC324 ETC326 ETC329 F GO ACET324 Outer Corner Cleat 24 pack ETC324 F GO ACET326 Corner Cleat 24 pack ETC326 ETC329 F GO ACET pack Inner Corner Cleat ETC321 ETC327 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

42 Image Part Code Pack Unit Application Colour ACET332 Transom End Cap for French Casement 10 pack ETC333 F GO ACET333 Cruciform Block 10 pack ETC333 F GO ACET334 Transom Locator Block 100 pack ETC333 F GO ACET335 Transom Locator Block 100 pack ETC335 F GO ACET336 Cruciform Block 10 pack ETC335 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

43 Image Part Code Pack Unit Application Colour ACET344 Corner Cleat 24 pack ETC344 F GO ACET346 Corner Cleat 24 pack ETC346 F GO ACET365 Espag. Handle Fixing Block (94mm) 1 each ACET165 ETC323 ETC324 ETC326 ETC329 ETC367 F GO ACET366 Cockspur Handle Fixing Block (94mm) 1 each ACET080 ETC323 ETC324 ETC326 ETC329 ETC367 F GO ACET367 Curved Espag. Handle Fixing Block (94mm) 1 each ACET165 ETC323 ETC324 ETC326 ETC329 ETC367 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

44 Image Part Code Pack Unit Application Colour ACET368 Curved Cockspur Handle Fixing Block (94mm) 1 each ACET165 ETC323 ETC324 ETC326 ETC329 ETC367 F GO ACET380 Run Up Block 100 pack F GO ACET385 Corner Keep Packers 20 pairs ACET35/3 ACET41/3 ACET53/3 ACET71/3 ACET84/3 F GO ACET393 Packer for ETC pack ETC344 ETC345 ETC346 F GO 3 38 ACET394 Keep & Stay Packer 25 pack ETC307 ETC308 ETC309 ETC310 ETC313 ETC316 ETC317 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

45 Image Part Code Pack Unit Application Colour 4 ACET835 Low Line External Gasket 200 m ETC364 ETC370 ETC371 ETC375 F GO ACET836 Flipper Gasket 250 m F GO ACET840 5mm Low Line Internal edge Gasket 150 m F GO 4 ACET841 4mm Low Line External Gasket 200 m F GO 3 ACET842 3mm Low Line External Gasket 200 m F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

46 Image Part Code Pack Unit Application Colour 2 ACET843 2mm Low Line External Gasket 200 m F GO ACET904 Crimping Punch 1 pair ETC308 ETC310 ETC313 ETC420 F GO ACET913 Crimping Punch 1 pair ETC328 F GO ACET941 Friction Hinge Drill Jig For Standard Top & Side Hung 1 each ETC420 ETC321 ETC323 ETC324 ETC326 ETC327 ETC328 ETC329 F GO ACET945 Transom/ullion Drill Jig 1 each ETC333 ETC335 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

47 Image Part Code Pack Unit Application Colour 8.25 ACET mm Packer 1 each ACET979 ETC346 F GO 12.8 ACET mm Packer 1 each ACET979 ETC326 ETC329 F GO ACET976 Vee Block 1 each ACET977 ETC307 ETC309 ETC316 ETC317 F GO 6 ACET977 6mm Packer 1 each ACET976 ETC307 ETC309 ETC316 ETC317 F GO ACET978 Crimping Punch 1 pair ETC309 ETC315 ETC316 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

48 Image Part Code Pack Unit Application Colour ACET979 Vee Block 1 each F GO 4 ACET mm Packer 1 each ACET979 ETC324 F GO ACET981 Crimping Punch 1 pair ETC321 ETC323 ETC324 ETC326 ETC327 ETC329 ETC344 ETC345 ETC346 F GO ACET982 Vee Block 1 each ACET983 ETC310 ETC313 ETC328 ETC420 F GO 5.75 ACET mm Packer 1 each ACET979 ACET982 ETC310 ETC313 ETC328 ETC344 ETC345 ETC420 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

49 Image Part Code Pack Unit Application Colour 9.3 ACET mm Packer 1 each ACET979 ACET982 ETC308 ETC344 ETC345 F GO 7.7 ACET mm Packer 1 each ACET979 ETC323 F GO ACVG49 edge Gasket 100 m ETC314 F GO ACVL059 End Caps 1 pair VL72 F GO ACVL061 Rivet 100 pack VL72 F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

50 Image Part Code Pack Unit Application Colour AC20024 Stainless Steel Chevron 100 pack F GO AC mm Low Line Internal edge Gasket 200 m F GO CA106 Stainless Steel Chevron 50 pack ETC315 F GO HEJ050AL Drill jig for ACET040 1 each ETC157 ETC158 ETC178 ETC179 F GO UT024HSA anual Crimper Note: Vee blocks & punches are sold separately. Please see Page E04. 1 each F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

51 Top Hung indows Friction Hinge Stays 13mm Stack (Standard) ax. Vent Height Typical Top Hung Type of Hinge / Stay eight (kgs) imimum aximum idth ACINDS ACINDS16 ACINDS20 ACINDS24 ACINDA10 ACINDA16 ACINDA20 ACINDA24 ACINV10 ACINV16 ACINV20 ACINV24 ACINDR12 ACINDR16 ACINDR20 ACINDR24 Side Hung indows Standard Austenitic Vector Restricted ax. Vent idth Typical Side Hung Type of Hinge / Stay eight (kgs) inimum aximum Height ACINDSSH Standard ACINDSSH ACINDASH Austenitic ACINDASH ACINVSH12* Vector ACINVSH ACINDRSH Restricted ACINDRSH ACINDESH Egress ACINDESH Note1: Vent Height / idth is measured in mm. Note2: Top hung height and side hung width sizes to be reduced by 2mm where size is 450mm or smaller Note3: Typical Dimensions based on ax. Size and Glass 30kg/metre Note4: * ACINVSH12 has a minimum order of 25 pairs T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish GO = Gold = Silver Anodised = Polished Chrome = Basic Colour = hite = Special Colour = Black = Dual Colour

52 17 17 'A' Sash Size Part Code inimum Sash Rebate Size ('A') aximum Handing ACET35R/ Right Handle ACET35L/ Left Handle ACET41R/ Right Handle ACET41L/ Left Handle ACET53R/ Right Handle ACET53L/ Left Handle ACET71R/ Right Handle ACET71L/ Left Handle ACET84R/ Right Handle ACET84L/ Left Handle Note1: Sash Limitations are Side Hung Height or Top Hung idth Note2: To Suit Handle ACET165 'A' T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) ACET mm Extension Rods

53 Image Part Code Pack Unit Application Colour AC each Alu. Polish F GO AC each axi Gloss F GO AC each Alu. Bright F GO AC each Teflon Spray F GO AC each axi Clean F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black

54 Image Part Code Pack Unit Application Colour AC each Alu. Cleaner F GO AC each Roll & rap 100mm F GO AC each Grip Handwrap F GO AC each Protective Tape 50mm F GO AC each Protective Tape 70mm F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black

55 Image Part Code Pack Unit Application Colour AC each Rubber Sealant F GO ACSIL04 1 each Sealing Glue F GO ACSIL08 1 each Silicon Gun F GO ACSIL013 1 each Glue for itre F GO ACSIL014 1 each Anti Corrosive Clear Lacquer F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black

56 Image Part Code Pack Unit Application Colour AC each Rubber Sealant F GO ACSIL04 1 each Sealing Glue F GO ACSIL08 1 each Silicon Gun F GO ACSIL013 1 each Glue for itre F GO ACSIL014 1 each Anti Corrosive Clear Lacquer F GO T-BARS ACVG65=2.5mm ACVG66=3.0mm ACVL150=4.0mm Screw (Grub) F = ill Finish = Dual Colour = Silver Anodised GO = Gold = Basic Colour = hite = Special Colour = Black

57 Section C Section C Standard Stays Only Outerframe ETC308 Vent ETC420 ETC366 ETC328 Reverse Adaptor ETC344 ETC372 ETC309 ETC321 ETC329 ETC345 ETC373 ETC346 ETC310 ETC323 Transom/ullion ETC333 Bead ETC372 ETC375 ETC371 ETC313 ETC324 ETC334 ETC364 ETC370 ETC316 ETC326 ETC367 ETC273 ETC317 ETC327 ETC335 ETC374 Scale 1:2

58 4 Standard Stays Do Not Scale From This Drawing

59 Standard Stays Detail 1A 47.5 ETC310 ACET115 ACET ACET ACET835 ETC Do Not Scale From This Drawing

60 Standard Stays Detail 1B 33 ETC313 ACET115 ACET ACET ACET835 ETC Do Not Scale From This Drawing

61 Standard Stays Detail 2A 33 ETC ACVL032 AC20034 ACET ACVL032 ACET310 ETC ACET835 ETC Do Not Scale From This Drawing

62 Standard Stays Detail 2B 47.5 ETC ACVL032 ACET323 ETC ACET840 ACET ACVL032 ETC326 ACET ACET Do Not Scale From This Drawing

63 Standard Stays Detail 2C ACET012 ACET323 ACVL032 ETC324 ETC367 ACET840 ACET ETC307 ACVL032 ACET324 AC ACET824 ACET Do Not Scale From This Drawing

64 ACSIL04 Alitherm 300 Standard Stays Detail 3A 53 ETC ACET310 ETC ETC364 ACET835 ACET Do Not Scale From This Drawing

65 Standard Stays Detail 3B 76 ETC359 ACSIL ACET ACET049 ETC364 ACET835 ACET840 ETC Do Not Scale From This Drawing

66 Standard Stays Detail 4A 53 VL ACVL ACVL032 ETC324 AC20024 ACET ETC ACET324 ACET323 ACVL ACET ETC ACET843 ACET Do Not Scale From This Drawing

67 Standard Stays Detail 4B ACVL032 ETC323 ACET310 ETC ACET044 ACET322 ACET323 ACVL ETC367 ACET843 ACET Do Not Scale From This Drawing

68 Standard Stays Detail 4C 76 VL ACVL ACVL032 ACET310 ACET049 ETC ETC329 ACET326 ACET323 ACVL ETC367 ACET843 ACET840 AC Do Not Scale From This Drawing

69 Standard Stays Detail 5A 28 ACET835 ACET ETC371 9 ETC ETC371 ACET835 ACET Transoms will drain through the join to the outerframe. Do Not Scale From This Drawing

70 Standard Stays Detail 5B ETC364 ACET835 ACET ETC ETC364 ACET835 ACET Transoms will drain through the join to the outerframe. Do Not Scale From This Drawing

71 Standard Stays Detail 5C 28 ACET843 ACET ETC373 ACSIL ACET131 ETC345 ACET393 ACET ACSIL04 ACET044 ETC333 ETC ACET843 ACET840 ETC Transoms will drain through the join to the outerframe. Do Not Scale From This Drawing

72 Standard Stays Detail 6A 28 ETC371 ACET835 ACET ETC ACET310 ACVL032 ETC371 ACVL032 ACET080 ACET083 ETC ACET835 ACET Transoms will drain through the join to the outerframe. If face drainage is preferred, wider transom ETC335 must be used. ETC335 Do Not Scale From This Drawing

73 Standard Stays Detail 6B 28 ETC375 ACET835 AC ETC327 ACVL032 ACET394 ACET ACET327 ACVL032 ETC333 ACET ETC375 ACET835 AC Transoms will drain through the join to the outerframe. If face drainage is preferred, wider transom ETC335 must be used. ETC335 Do Not Scale From This Drawing

74 Standard Stays Detail 6C 24 ACET843 ACET840 ETC ETC323 ACET131 ACET044 ACVL032 ACET394 ACET393 ACET060 ACET322 ETC346 ACET322 ACET323 ACET044 ACET165 ACVL032 ETC333 ETC ACET843 ACET Transoms will drain through the join to the outerframe. If face drainage is preferred, wider transom ETC335 must be used. ETC335 Do Not Scale From This Drawing

75 Standard Stays Detail 6D 24 ACET843 ACET840 ETC367 ETC ACET131 ACET044 ACVL032 ACET ACET322 ETC364 ACET835 ACET165 ACET323 ACVL032 ACET840 ETC Transoms will drain through the join to the outerframe. If face drainage is preferred, wider transom ETC335 must be used. ETC335 Do Not Scale From This Drawing BULLETIN ADDED FEBRUAR 2011

76 Standard Stays Detail 6E 28 ACET843 ACET840 ETC ETC324 ACET ACET131 ACET324 ACET323 ACET165 AC ACVL032 ACVL ACET ETC ETC371 ACET835 ACET Transoms will drain through the join to the outerframe. If face drainage is preferred, wider transom ETC335 must be used. ETC335 Do Not Scale From This Drawing BULLETIN ADDED FEBRUAR 2011

77 Standard Stays Detail 7A 28 ACET843 ACET840 ETC ACET ACET131 AC20024 ACVL032 ETC324 ACET394 ACVL032 ACET066 AC20024 ETC324 ACET824 ACET324 ACET324 ACET323 ACET323 ACET165 ACVL032 ETC335 ACVL032 ETC ACET843 ACET Transoms will drain through the join to the outerframe. Do Not Scale From This Drawing

78 Standard Stays Detail 7B 28 ETC375 ACET835 AC ETC420 ACET310 ACET ACVL032 ACVL032 ACET ACVL032 ACVL032 ETC ETC420 ACET ETC375 ACET835 AC Transoms will drain through the join to the outerframe. Do Not Scale From This Drawing

79 Standard Stays Detail 7C ETC375 ACET835 AC ETC327 ACVL032 ACET394 ACVL032 ACET321 ACET327 ACVL032 ETC335 ACET ETC327 ACET321 ACET ETC375 ACET835 AC20034 Transoms will drain through the join to the outerframe. Do Not Scale From This Drawing

80 Standard Stays Detail 8A 24 ETC364 ACET835 ACET840 ETC310 ACET ACSIL ACSIL04 ACET040 ETC157 (END CAPS: ACET157) ACSIL Cill end caps should be sealed to cill to prevent water egress over edge Do Not Scale From This Drawing

81 Standard Stays Detail 8B 28 ETC375 ACET835 ACET ETC317 ACET310 ACET ACSIL04 ACSIL04 25 ACET040 ETC157 (END CAPS: ACET157) ACSIL Cill end caps should be sealed to cill to prevent water egress over edge Do Not Scale From This Drawing

82 Standard Stays Detail 9A 28 ETC366 ACET841 AC ETC313 ACSIL ETC328 ACET044 ACVL032 AC20017 ACET060 ACVL ACSIL04 ACET310 ACET040 ETC157 (END CAPS: ACET157) ACSIL Cill end caps should be sealed to cill to prevent water egress over edge Do Not Scale From This Drawing

83 Standard Stays Detail 9B 28 ETC375 ACET835 AC20034 ETC311 ACET310 ACSIL ETC327 ACVL032 ACET394 ACET321 ACSIL04 ACET327 ACVL032 ACET040 ETC157 (END CAPS: ACET157) ACSIL Cill end caps should be sealed to cill to prevent water egress over edge Do Not Scale From This Drawing

84 Standard Stays Detail 9C 24 ACET835 AC20034 ETC ACET323 ACVL ETC323 ACET ACET131 ACET044 ACVL032 ACET394 ACET310 ACET ACSIL04 ETC317 ACSIL04 ACET040 ETC157 (END CAPS: ACET157) ACSIL Cill end caps should be sealed to cill to prevent water egress over edge Do Not Scale From This Drawing

85 Standard Stays Detail 10A ACSIL04 ACSIL04 ETC310 ETC353 ETC310 AC20034 AC20034 ACET ACET835 ETC375 ACET310 ACET835 ETC Do Not Scale From This Drawing

86 Standard Stays Detail 10B 84 ACSIL04 39 ACSIL ACET012 ACET012 AC20034 AC ACET835 ETC ACET310 ETC317 ETC357 ACET310 ETC ACET835 ETC Do Not Scale From This Drawing

87 Standard Stays Detail 10C 24 ACET115 ACET840 ACET835 ETC364 ACET115 ACSIL ETC313 ACET ETC313 ACET840 ACSIL ACET835 ETC364 ACET310 ACET ACSIL04ETC Do Not Scale From This Drawing

88 Standard Stays Detail 10D AC20034 ACET835 ETC375 ACSIL04 ETC319 ACET012 ACET ETC317 ACET012 ACSIL04 AC20034 ACDR ACET835 ETC375 ACET310 ACDR ETC319 ETC ACSIL Do Not Scale From This Drawing

89 Standard Stays Detail 10E ACET049 CA106 CA106 ACET049 ETC350 ETC350 CA106 ETC ETC309 ACET AC20034 ACET310 ACSIL04 ACSIL04 CA106 ACSIL04 ACSIL04 Please refer to page E19 for size calculations AC ACET835 ACET ETC Do Not Scale From This Drawing

90 Section D

91 Standard Stays For ind Loading Limitations, Please Contact The Technical Department. Do Not Scale From This Drawing

92 Section F Section E Alitherm 300 Standard Stays Construction Drawings Index E ETC Construction Drawings E Corner Jointing... Page E02 - E04 E 2 2 -Drainage... Page E05 - E06 E Transom/ullion Preparation... Page E07 - E09 E Hinges... Page E10 E Locking Hardware... Page E11 - E13 E Beading & Glazing... Page E14 - E Coupling/Bay Poles... E 7 Page E17 - E18 IF IN DOUBT ASK!

93 Typical Corner Detail Standard Stays To ensure accurate corners, we recommend the use of support blocks (by others) whilst cutting. APPL SILICONE (ACSIL04) TO EDGE OF PROFILE. APPL CLEAT GLUE (ACSIL013) TO ALL CLEAT CHABERS CORNER CHEVRON Do Not Scale From This Drawing

94 Corner Crimping - Externally Glazed Sections Standard Stays ACET990 (9.3mm PACKER) ACET983 (5.75mm PACKER) ACET310 ETC308 ACET AC20017 ETC328 ACET ACET982 ACET982 ACET977 (6mm PACKER) ACET049 ACET012 ACET049 ACET310 ETC316 ACET310 ACET012 ETC317 ACET310 ETC307 ACET310 ETC309 ACET anual Crimper = UT024HSA ACET ACET983 (5.75mm PACKER) 4 ACET975 (4mm PACKER) ACET327 ACET ACET310 ETC310 ACET310 ETC313 ACET310 ETC420 ACET ACET321 ETC321 ACET321 ETC327 ACET981 (3.5mm crimp to top) 54.5 ACET982 ACET979 Do Not Scale From This Drawing

95 Corner Crimping - Internally Glazed Sections Standard Stays ACET991 (7.7mm PACKER) ACET980 (11.8mm PACKER) ETC323 ACET323 ACET322 ACET ACET323 ACET324 ETC324 ACET ACET979 ACET979 ACET969 (12.8mm PACKER) ETC326 ACET323 ACET326 ETC329 ACET323 ACET326 ACET anual Crimper = UT024HSA ACET979 ACET990 (9.3mm PACKER) ACET975 (4mm PACKER) ACET344 ACET990 (9.3mm PACKER) ACET983 (5.75mm PACKER) ACET346 ACET968 (8.25mm PACKER) ACET346 ETC344 ACET981 (3.5mm crimp to top) 54.5 ETC345 ACET981 (3.5mm crimp to top) 54.5 ETC346 ACET981 (3.5mm crimp to top) 54.5 ACET979 ACET979 ACET979 Do Not Scale From This Drawing

96 Drainage Standard Stays ACET131 Drainage Through Transom/Cill 5 * 7.5 ETC335 Transom Fixed Light * Transoms will drain through the join to the outerframe. If face drainage is preferred, wider transom ETC335 must be used. Drainage Through Vent 60 Option A mm inimum Diameter Hole ACET Outerframe ithout Cill 25 ACET012 ETC333 Transom ith Vent * 100 8mm inimum Diameter Holes For Pressure Equalization Drainage Through Vent Option B 5 Ø8 OR here not seen Important Note: All exposed aluminium should be coated using ACSIL014 or painted to match the frame. 4 ETC313 should only be used with a cill to allow a drainage path. Outerframe ith Cill Outerframe ith Reverse Adaptor Do Not Scale From This Drawing

97 Sub Cill Drainage Standard Stays ACET040 Variable Angle Cill Joiner Use drill jig HEJ050 to ensure accuracy Use grub screws HEA018SS to secure Cill end caps should be sealed to cill to prevent water egress over edge 4 ACSIL08 ACSIL04 ACET040 ACET ETC157 Shown with ACET157 end cap Drainage on Subcill Do Not Scale From This Drawing

98 Transom/ullion Preparation Standard Stays ACET333 Cruciform Bracket 25.5 ACET114 Anti-Twist Clip ACET114 ETC333 Ø4.5 NOTE: here the cruciform is used in fixed lights, the bead needs to be notched. ACET334 ETC ACET114 Ø ACET114 ACET333 Use the cruciform bracket to mark the holes with a 3.5mm drill bit. ETC ACET066 6 ACET ACET066 To ensure accuracy use drill jig ACET945 End mill cutters can be ordered through Smart Systems Ltd. Please contact the Technical Department for an order form. Standard delivery is 2-3 weeks approx. 6 Do Not Scale From This Drawing

99 Transom/ullion Preparation Standard Stays ACET336 Cruciform Bracket 25.5 ETC ACET125 Anti-Twist Clip ACET125 ETC335 Ø ACET335 Use the cruciform bracket to mark the holes with a 3.5mm drill bit ACET066 ACET125 Ø ACET333 ETC ACET335 ACET066 To ensure accuracy use drill jig ACET945 End mill cutters can be ordered through Smart Systems Ltd. Please contact the Technical Department for an order form. Standard delivery is 2-3 weeks approx Do Not Scale From This Drawing

100 Transom/ullion Preparation Standard Stays End mill cutters can be ordered through Smart Systems Ltd. Please contact the Technical Department for an order form. Standard delivery is 2-3 weeks approx Ø11 45 Ø11 Option A Option B 5 5 ETC334 ETC ACET075 Ø Ø ACET334 ACET334 ETC317 ACET066 ACET066 Do Not Scale From This Drawing

101 French Casement Locking Preparation Standard Stays 14 ACET066 The secondary window is fixed to the mullion with adequate packing to allow the shootbolt to freely operate ETC333 ACET332 Primary Secondary The primary window lock into the mullion as standard The secondary window locks into the corner keep only ACET332 Centre keeps are used to secure the shootbolts in position as the end keeps cannot be used. ACET068 Do Not Scale From This Drawing

102 Friction Hinge Details Standard Stays ETC323 ETC324 ETC327 ETC321 ETC328 ETC326 ETC329 ETC S S S 8 12S A B ETC420 A ETC323 A ETC324 A ETC ETC322 B 9 ETC325 B 9 ETC328 B 9 9 ACET A To ensure accuracy use drill jig ACET941. Numbers indicate stay length in inches, numbers followed by an 'S' are used for side hung stays. ACET070 = Recommended Screw Vent Sizes 450mm or Smaller to be Reduced by 2mm ETC326 A Do Not Scale From This Drawing

103 Cockspur Handle Preparation Standard Stays Vents Over 750mm Require 2 Cockspur Handles Sash Outerframe ACET083 3mm Thick edge ACET080 LH or RH Cockspur Handle ACET ACET064 ACET064 ACET ACET080 Ø3.5 Ø3.5 ETC Ø3.5 Ø Ø4.5 Ø4.5 ETC310 ACET083 = 31.5 = Do Not Scale From This Drawing

104 ulti-point Locking Preparation Standard Stays R B ETC327 A ETC321 ETC328 View on Arrow A Centre Line Ø10 Ø10 Ø10 View on Arrow B ACET394 Centre Keep Packers ACET385 Corner Keep Packers Left Hand Right Hand The shootbolts must engage into the polyamide to ensure secure locking Do Not Scale From This Drawing

105 ulti-point Locking Preparation Standard Stays 94 ETC367 See Page E15 for Beading Detail ETC367 ACET365 ETC367 View on Arrow A Ø6 Ø6 2 ETC323 7 ETC324 ETC326 ETC A B CA Secure ACET365 into position before fixing the gearbox. CA134 Ø6 Ø View on Arrow B R See page E13 for keep packer information. The shootbolts must engage into the polyamide to ensure secure locking Do Not Scale From This Drawing

106 Glazing Details Standard Stays Externally Glazed 24 ETC370 or ACET835 ETC364 ACET840 ETC307 ETC308 ETC309 ETC310 ETC313 ETC316 ETC317 ETC420 ETC321 ETC327 ETC333 ETC334 ETC335 Internally Glazed ACET843 ACET840 ETC367 ETC273 ACET843 ACET840 ETC372 ETC323 ETC346 Do Not Scale From This Drawing

107 Glazing Details Standard Stays Externally Glazed ACET835 ACET840 ETC307 ETC308 ETC309 ETC310 ETC313 ETC316 ETC317 ETC420 ETC321 ETC327 ETC333 ETC334 ETC335 ETC375 or ETC371 ACET840 ETC366 ETC328 ACET843 Internally Glazed ACET ACET840 ETC367 ETC273 ACET ACET840 ETC372 ACET ACET840 ETC367 ETC273 ACET ACET840 ETC373 ETC326 ETC329 ETC344 ETC324 ETC345

108 ETC367 Notch Detail Standard Stays ETC367 ETC367 ETC273 ETC367 4 ETC273 ETC323 ETC324 ETC326 ETC329 9 ETC323 ETC324 ETC326 ETC329 ETC367 ETC273 ETC323 ETC324 ETC326 ETC329 ETC273 should be mitred. The beads to the handle side must be fitted last, then the handle block ACET367 or ACET368 can be fitted. Do Not Scale From This Drawing

109 Coupling Information Standard Stays ETD330 ETC313 ETD010 ETC310 ETD ACET060 ACET ACET070 ACET066 ETD351 ETD351 ACSIL08 ACSIL04 ACSIL08 ACSIL ETD UTL039 UTL039 6 ETC317 ACET070 ETD018 ETC316 ACET070 ETD ACET070 ACET070 ACET066 ACET066 Ø ACSIL08 ACSIL04 ETD ACSIL08 ACSIL04 ETD351 ACDR052 ETD330 can be used with a standard stay outerframe providing the following beads are used in the midrail: 24mm = ETC362 with ACET841 externally & AC20034 internally 28mm = ETC361 with ACET841 externally & AC20034 internally Do Not Scale From This Drawing

110 Bay Pole Angles/Deductions Standard Stays ANGLE 12.5 ANGLE 'A' ETC869 ETC869 ETC309 ONL ETC350 ETC350 ETC309 ONL ETC310 ETC310 ANGLE DEDUCTION 'A' ANGLE DEDUCTION 'A' Do Not Scale From This Drawing

111 Fixing Strap Details Standard Stays ETC307 ACET064 ACET064 ACET130 Fixing straps should be spaced a minimum of 150mm in from each end & at a maximum of 300mm apart. ETC310 ACET060 ACET060 ACET ETC313 Bend to Fit ACET067 ACET067 ACET ETC317 ACET060 ACET060 ACET ACET mm Galvanised Steel ETC316 ACET060 ACET060 ACET130 ACET130 Do Not Scale From This Drawing

112 Section F Section F

113 Cutting Information - Standard Stays PART DESCRIPTIONS TPICAL STLES HEAD & CILL OUTER FRAE VENT (1) VENT (2) VENT (1) VENT (2) FIED PANEL (1) JABS TRANSO(S) ULLION(S) HORIONTAL COPONENTS VERTICAL COPONENTS HORIONTAL COPONENTS VERTICAL COPONENTS GLASS IDTH GLASS HEIGHT GLASS IDTH GLASS HEIGHT GLASS IDTH GLASS HEIGHT H - 65 H - 65 H H H H H H H H H H H H H H OF to CL OF to CL CL to CL OF to CL H - 65 H - 65 H - 65 H - 65 H H OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL H - 53 CLT to CLT H - 53 H - 53 H - 53 H OF to CL CL to CL CL to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL H CLT to CLT H H H H OF to CL CL to CL CL to CL OF to CL OF to CL CL to CL CL to CL CL to CL OF to CL H - 65 H - 65 H - 65 H FIED PANEL (2) GLASS IDTH GLASS HEIGHT LEGEND: = H = CL = O/F = Overall window outer frame width - outside Overall window outer frame height - outside Centre line of transom/mullion Extreme edge of outer frame Sections: Outerframe: ETC310 ETC312 ETC316 ETC318 ETC319 Sash: ETC320 ETC324 ETC322 ETC325 ETC323 Transom/ullion: ETC ETC363 ACET835 AC20034 ETC310 ACET ETC363 ETC363 ACET835 ACET835 AC20034 AC20034 ETC ACET836 ETC310 ACET ACET012 ETC361 ETC320 ACET836 AC20034 ACET ETC361 ETC320 ACET835 ACET012 ACET836 ETC363 ACET835 AC20034 ACET080 ACET836 ACET836 ACET083 AC20034 ETC Do Not Scale From This Drawing

114 Cutting Information - Standard Stays PART DESCRIPTIONS TPICAL STLES HEAD & CILL OUTER FRAE VENT (1) VENT (2) VENT (1) VENT (2) FIED PANEL (1) JABS TRANSO(S) ULLION(S) HORIONTAL COPONENTS VERTICAL COPONENTS HORIONTAL COPONENTS VERTICAL COPONENTS GLASS IDTH GLASS HEIGHT GLASS IDTH GLASS HEIGHT GLASS IDTH GLASS HEIGHT H - 87 H - 87 H H H H H H H H H H H H H H OF to CL OF to CL CL to CL OF to CL H - 77 H - 77 H - 77 H - 77 H H OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL H - 65 CLT to CLT H - 65 H - 65 H - 65 H OF to CL CL to CL CL to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL OF to CL H CLT to CLT H H H H OF to CL CL to CL CL to CL OF to CL OF to CL CL to CL CL to CL CL to CL OF to CL H - 87 H - 87 H - 87 H FIED PANEL (2) GLASS IDTH GLASS HEIGHT LEGEND: = H = CL = O/F = Overall window outer frame width - outside Overall window outer frame height - outside Centre line of transom/mullion Extreme edge of outer frame Sections: Outerframe: ETC309 Sash: ETC420 ETC324 ETC321 ETC326 ETC323 ETC329 Transom/ullion: ETC333 ETC ETC375 ETC309 ACET310 CA106 ACET840 ACET049 CA ETC371 ETC371 ACET835 ACET835 ACET840 ETC CA106 CA106 ETC309 ACET ACET049 ACET310 ACET310 ACET836 ETC420 AC20034 ACET835 ETC ETC371 ETC420 ETC371 ACET835 ACET310 ACET835 ACET840 ACET080 ACET836 ACET083 ACET Do Not Scale From This Drawing

Kestrel Aluminium Systems Limited. Product Manual Section 12 60mm Polyamide Window System. Manual Version

Kestrel Aluminium Systems Limited. Product Manual Section 12 60mm Polyamide Window System. Manual Version Limited Product Manual Section 12 mm Manual Version 23.0.1 Section 12.01 Product Specification 12.01.01 sheet 1 mm Window System Product Specification 12.01.01 sheet 2 mm Window System Product Specification

More information

Installation - Sub Cills

Installation - Sub Cills Installation - Sub Cills Fitting of Subcill Drainage paths through the sub-cill can be seen on the illustration alongside so care must be taken to ensure they are not obstructed and that screw fixings

More information

Aluminium Window Scheme to BS4873 & PAS24:2016

Aluminium Window Scheme to BS4873 & PAS24:2016 SCOPE OF CERTIFICATION Aluminium Window Scheme to BS4873 & PAS24:2016 Manufacturer of Enhanced Security Windows in accordance with the Exova BM TRADA Q-Mark Scheme requirements. (Check with Secured by

More information

Kestrel Aluminium Systems Limited. Product Manual Section 13 60mm Polyamide Window System - Fabrication. Manual Version

Kestrel Aluminium Systems Limited. Product Manual Section 13 60mm Polyamide Window System - Fabrication. Manual Version Limited Product Manual Section 13 60mm - Fabrication Manual Version 24.0.1 Section 13.01 Fabrication Guidelines for cutting and prepping 13.01.01 sheet 1 General guidelines for cutting and bar preparation

More information

SPW500 Thermal Framing SPW500. Product Assembly Manual 2012 Thermal Framing

SPW500 Thermal Framing SPW500. Product Assembly Manual 2012 Thermal Framing SPW500 Thermal Framing SPW500 Product Assembly Manual 2012 Thermal Framing SPW.500.ii 01.12 SPW500 Thermal Framing Introduction The Company Senior Architectural Systems Ltd are a group of companies based

More information

SIG Awning / Casement / Fixed Lite 100

SIG Awning / Casement / Fixed Lite 100 TYPICAL FRAME ASSEMBLY - AWNING WINDOW 07-01 85720-2 GASKET EXT FL JAMB 100 BS201 (3471) HEAD HINGED 100 86064 TRIM FIN A 83963 SCREW SQ 8G X 1.0 PAN PP SS #2 85737 GASKET EXT FL TRANSOM 85720-1 86065

More information

Vertical Slider Section Detail

Vertical Slider Section Detail Vertical Slider Section Detail PRODUCT GUIDE Main & Bead Profiles 128 42 69 VS01 - Outer frame 150 139 210 189 60 52 52 52 48 30 42 60 18 72 90 18 60 VS02 - Cill VS14 - Cill 18 VS03 - Top Sash VS04 - Standard

More information

SPW600e Inward Opening SPW600. Product Assembly Manual 2012 Inward Opening

SPW600e Inward Opening SPW600. Product Assembly Manual 2012 Inward Opening SPW600e Inward Opening SPW600 Product Assembly Manual 2012 Inward Opening SPW600e.2.ii 04.12 SPW600e Inward Opening Introduction The Company Senior Architectural Systems are a group of companies based

More information

SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL

SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL 2.1.ii 07.08 SCW Curtain Wall Introduction The Company Senior Aluminium Systems are a group of companies based in the United Kingdom supported through

More information

VEKA GROUP PATIO DOOR PATIO DOOR PATIO DOOR UNCONTROLLED DOCUMENT AUTHOR PHIL GREGORY VEKA _IMAGINE PATIO_INSTALLER AID

VEKA GROUP PATIO DOOR PATIO DOOR PATIO DOOR UNCONTROLLED DOCUMENT AUTHOR PHIL GREGORY VEKA _IMAGINE PATIO_INSTALLER AID VEKA GROUP VEKA _IMAGINE PATIO_INSTALLER AID UNCONTROLLED DOCUMENT VEKA GROUP USE OF THIS MANUAL Guidelines Advice & General Information. Although it is possible to manufacture a five metre four pane patio

More information

Contents GROUP SECTION DESCRIPTION. Page. Rapier Star SCREW FIXING GUIDE. General. General cont... General cont... Casement Window: Reinforced

Contents GROUP SECTION DESCRIPTION. Page. Rapier Star SCREW FIXING GUIDE. General. General cont... General cont... Casement Window: Reinforced Contents GROUP SECTION DESCRIPTION Page 1 GENERAL 1.1 Main Profiles Main Profiles 1 1.2 Accessory Profiles Extensions & Coupling Profiles Cills & Glazing Beads 1 2 2 FABRICATION 2.1 Sections Double Door

More information

Liniar Window. installation guide

Liniar Window. installation guide Liniar Window installation guide This installation guide is designed to show you the best way to fit Liniar windows, and covers all styles of window made from Liniar s lead-free 70mm PVCu profile. Not

More information

SMART SYSTEMS VISOGLIDE+ INSTALLTION GUIDE

SMART SYSTEMS VISOGLIDE+ INSTALLTION GUIDE SMART SYSTEMS VISOGLIDE+ INSTALLTION GUIDE Please read guide before beginning any installation. Instructions/Guides Keys & Handle Screw Covers Interlock Covers Anti-Lift & Rubber Stops Anti-Lift for Slim

More information

Kestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version

Kestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version Kestrel Aluminium Systems Limited Product Manual Section 22 TB Commercial Door Manual Version 23.0.1 PAS24: 2012 Section 22.01 Product Specification 22.01.01 sheet 1 Product specification 22.01.01 sheet

More information

ASS 70 FD folding / sliding door. Installation Guide

ASS 70 FD folding / sliding door. Installation Guide ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.

More information

Kestrel Aluminium Systems Limited. Product Manual Section 11 Thermal Framing System - Fabrication. Manual Version

Kestrel Aluminium Systems Limited. Product Manual Section 11 Thermal Framing System - Fabrication. Manual Version Limited Product Manual Section 11 - Fabrication Manual Version 23.0.1 Section 11.01 Fabrication 11.01.01 sheet 1 General guidelines for cutting and bar preparation Section 11 Contents Section 11.02 Fabrication

More information

Installation Guide. Bi-fold Doors

Installation Guide. Bi-fold Doors Installation Guide Bi-fold Doors Installation Guide Components box 1. 6. 2. 3. 7. 5. 4. 8. Contents 1. Fixing plugs 2. Wedge gasket 3. Bottom trolley 4. Top trolley 5. Magnetic keep (x 2 if door height

More information

patio door installation guide

patio door installation guide patio door installation guide Measuring & surveying p2 Mechanical jointing p5 Installation p5 Hardware adjustment p7 Sealing of outer frame p7 Cleaning p7 Walk through clearances p8 Minimum and maximum

More information

C D. Secondary Glazing Fixed Unit. Do not scale 1 to 1. Frame 301 Face Fix. 19.8mm. Typical Elevation. Top hung over fixed.

C D. Secondary Glazing Fixed Unit. Do not scale 1 to 1. Frame 301 Face Fix. 19.8mm. Typical Elevation. Top hung over fixed. Secondary Glazing Fixed Unit 19.8mm 14.0mm Frame 301 Face Fix Top hung over fixed Fixed unit Fixed unit using overlap section 310 Glazing available in 4mm 6mm and 6.4mm Laminate Glass o not scale 1 to

More information

ESS Awning / Casement / Fixed Lite 52

ESS Awning / Casement / Fixed Lite 52 05-01 83963/S8100PP SCREW SQ 8G X 1.0 PAN PP SS #2 (FRAME) 85990 /S8150PP SCREW SQ 8G X 1.5 PAN PP SS #2 (SASH) 83765 SCREW SQ 8G X 0.75 PAN SD SS #2 (SECURITY SCREEN TO FRAME) 86876 SCREW SQ M4 X 0.55

More information

173.1 INTRODUCTION SERIES 453 RESIDENTIAL DOUBLE-HUNG WINDOW INTO FRAMING. Australian Registered Design. Design Features :

173.1 INTRODUCTION SERIES 453 RESIDENTIAL DOUBLE-HUNG WINDOW INTO FRAMING. Australian Registered Design. Design Features : INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE Design Features : Vertical sliding double-hung sashes inlaid directly into shopfront framing. Flyscreens tuck into dedicated recess in the jamb

More information

Flush Fitting Casement

Flush Fitting Casement The has been designed as a modern PVC equivalent of the traditional 95mm wide, flush fitting hardwood timber casement window, enabling you to replace wooden windows with authentic designs in authentic

More information

C-Series & S-Series Classic Frame with Transom (Single or Pair)

C-Series & S-Series Classic Frame with Transom (Single or Pair) 1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on

More information

XL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS

XL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS XL JOINERY LTD LA PORTE VISTA MODULAR 3 2090mm High x 4687mm Wide ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS FULLY PRIOR TO STARTING INSTALLATION. IT IS STRONGLY RECOMMENDED THAT A COMPETENT

More information

Extrusions GB-3-IN01. Updated: Scale: REV: - This Drawing is Protected by Copyright Altus NZ Ltd.

Extrusions GB-3-IN01. Updated: Scale: REV: - This Drawing is Protected by Copyright Altus NZ Ltd. Extrusions Updated: N/A Scale: N.T.S REV: - Dwg Dwg Revision Rev No Description Description Date GB-3-IN01 Index Page - - - - - GB-3-001 Extrusions - - - - - GB-3-002 Extrusions - - - - - GB-3-003 Extrusions

More information

ASS 70 FD folding/sliding door installation guide

ASS 70 FD folding/sliding door installation guide ASS 70 FD folding/sliding door installation guide 2 Preparation IMPORTANT These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the

More information

Installation Instructions

Installation Instructions Installation Instructions Alcove Enclosure Before Installation please check that your shower enclosure system is undamaged Please read these instructions carefully March 2015 TOOLS REQUIRED Electric or

More information

FITTING INSTRUCTIONS

FITTING INSTRUCTIONS COMMERCIAL HINGES SECTION 2.1 SHEET 1 of 14 ISSUE: May, 2003 FITTING INSTRUCTIONS: Position and Clearances STERLING and Sterling STORM Standard Hinge Series 2.1.1 Storm Standard hinges are designed to

More information

40mm Thermoclick. Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial)

40mm Thermoclick.  Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) http://www.sundancesupply.com 40mm Thermoclick Type II Class 1 Clear Satin Anodize - 201R1 (Mid Grade Commercial) U-Profile 12' Lengths $39 Out System offers a complete set of extrusions and accessories

More information

Method of Build 1. General

Method of Build 1. General Method of Build 1 General GLAZED ELEVATIONS Viso Double Glazed in glazed form differs from many other systems as the vertical joints can have Viso dry joints or the unique HIDDEN mullion post between glazed

More information

For Installer. Duration Windows. Assembly Guide Durafold 1000

For Installer. Duration Windows. Assembly Guide Durafold 1000 For Installer Assembly Guide Durafold 1000 Contents Title Page Number Handling Manual Blinds 4 Handling Electronic Blinds 5 Drainage 63 Outer Frame Assembly (Kit Form Door Only) 7 15mm Low Threshold Assembly

More information

SPG+S27 PATENT GLAZING. SPG+S27 Series Product Assembly Manual 1999

SPG+S27 PATENT GLAZING. SPG+S27 Series Product Assembly Manual 1999 SPG+S27 PATENT GLAZING SPG+S27 Series Product Assembly Manual 1999 4.1.ii 03.99 SPG and S27 Patent Glazing Introduction The Company Senior Aluminium Systems are a group of companies based in the United

More information

Series 525 LouvreMASTER Adjustable Louvre Window

Series 525 LouvreMASTER Adjustable Louvre Window Series 525 LouvreMASTER Adjustable Louvre Window DESIGNER SERIES Photo courtesy of Hanlon Windows Australia DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 525 KEY EATURES / PERORMANCE

More information

PRODUCT MANUAL. November A product of crealco WISPECO. Aluminium. creative aluminium

PRODUCT MANUAL. November A product of crealco WISPECO. Aluminium. creative aluminium November 2017 A product of creative aluminium WISPECO Aluminium LEGAL DISCLAIMER General Documentation Disclaimer This manual is intended as a manufacturing and installation advisory document. For correct

More information

This installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format.

This installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format. 1.00 - Introduction This installation guide has been created to assist in constructing a Liniar conservatory roof from a kit format. Please note, each roof has been individually designed to meet specific

More information

SSG Series Product Assembly Manual 2014 SSG SECONDARY GLAZING

SSG Series Product Assembly Manual 2014 SSG SECONDARY GLAZING SSG Series Product Assembly Manual 2014 SSG SECONDARY GLAZING SSG10.1.ii 06.14 SSG Secondary Glazing Introduction The Company Senior Architectural Systems is a UK based group which operates through a network

More information

Method of Build 1. Fire. Sound

Method of Build 1. Fire. Sound Method of Build 1 General Viso Fire & Acoustic in the solid form differs from most other systems as it can be erected using 12.5mm & 15.0mm boards within the same Aluminium framework. Also hidden fix board

More information

In-line Patio Fabrication & Installation

In-line Patio Fabrication & Installation In-line Patio Fabrication & Installation Instructions 2 Pane Patio p2 Cutting and Preparation p2 Welding and Cleaning p2 Assembly p2 Fabrication Instructions for 3/4 Pane Lock Style p3 Installation (removable

More information

How to operate (folding)

How to operate (folding) How to operate (folding) LEFT HAND STACKING OUTWARD OPENING How to operate (folding) RIGHT HAND STACKING OUTWARD OPENING LOCK BOTH LEVER HANDLE AND FLAT HANDLE UTILISING THE D-HANDLE LOCATED ABOVE THE

More information

ALLORA SWING PANEL INSTALLATION INSTRUCTIONS

ALLORA SWING PANEL INSTALLATION INSTRUCTIONS ALLORA SWING PANEL INSTALLATION INSTRUCTIONS Before Installation Please check that your Allora Swing Panel is undamaged SEQUENCE OF INSTALLATION These instructions are also available from the Athena website:

More information

FITTING INSTRUCTIONS FOR FOLDING SLIDING DOOR SYSTEM SF55 & SF75 WITH WEATHERED OR FLUSH TRACK

FITTING INSTRUCTIONS FOR FOLDING SLIDING DOOR SYSTEM SF55 & SF75 WITH WEATHERED OR FLUSH TRACK FITTING INSTRUCTIONS FOR FOLDING SLIDING DOOR SYSTEM SF55 & SF75 WITH WEATHERED OR FLUSH TRACK Please refer to your order or detailed sectional drawing (if requested) to assist you with the configuration

More information

Design Features : INTRODUCTION SERIES 704 ARCHITECTURAL SlideMASTER SLIDING DOOR. Australian registered design.

Design Features : INTRODUCTION SERIES 704 ARCHITECTURAL SlideMASTER SLIDING DOOR. Australian registered design. INTRODUCTION DATE DEC 07 REPLACES JUN 06 SCALE NOT TO SCALE Design Features : Series 704 has been designed as an internal sliding door that can be fabricated in numerous configurations: 'XF', 'FX', 'FXF',

More information

Series 517 Residential Awning Window

Series 517 Residential Awning Window Series 517 RESIDENTIAL SERIES Photo courtesy of Vista Windows DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 RESIDENTIAL SERIES Series 517 KEY FEATURES / PERFORMANCE CHARACTERISTICS Replaces: aug 03 Scale:

More information

C11.16 CHRONO ACCESSORIES C11 SIDE HUNG WINDOWS

C11.16 CHRONO ACCESSORIES C11 SIDE HUNG WINDOWS C11 SIDE HUNG WINDOWS CHRONO ACCESSORIES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays....03

More information

Guardian warm roof conversion system. Installation Guide

Guardian warm roof conversion system. Installation Guide Guardian warm roof conversion system Installation Guide 2 www.guardianroof.co.uk Conservatory walls consist largely of glazed elements including windows and doors that may include structural mullions or

More information

WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET D PVC

WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET D PVC WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.1 Tilt&Turn Hardware UNI-JET D PVC Table of Contents 06.1 UNI-JET D PVC 06 1 DIRIGENT T&T Handle...06.1.9 Tilt&Turn...06.1.10 Turn-Only Sash...06.1.14 Dummy-mullion

More information

The Duraflex Diamond Suite range of profiles are premium products that are attractive, sturdy and offer trouble free performance.

The Duraflex Diamond Suite range of profiles are premium products that are attractive, sturdy and offer trouble free performance. Technical Manual Introduction On behalf of the UK Window Group we would like to thank you for choosing our products and trust we can continue to grow a mutually beneficial trading relationship going forward.

More information

ALU 4200-K/ZV Clampable tilt-sash fitting for aluminium windows

ALU 4200-K/ZV Clampable tilt-sash fitting for aluminium windows Clampable tilt-sash fitting for aluminium windows Further details and specifications/information regarding the product and liability (guidelines: VHBH, TBDK and VHBE) can be found in the aluminium planning

More information

FITTING INSTRUCTIONS FOR FOLDING SLIDING DOOR SYSTEM SF75H

FITTING INSTRUCTIONS FOR FOLDING SLIDING DOOR SYSTEM SF75H FITTING INSTRUCTIONS FOR FOLDING SLIDING DOOR SYSTEM SF75H 01603 424434 Please refer to your order or detailed sectional drawing (if requested) to assist you with the configuration of the system supplied

More information

CAUTION. Fitting and Fixing Guidelines for Rio French Doors - Outward Opening.

CAUTION. Fitting and Fixing Guidelines for Rio French Doors - Outward Opening. JWG607_Rio_FrenchDoors:Layout 1 19/2/10 13:32 Page 1 Rio French Doors - Outward Opening CAUTION SAFETY: Large windows and glass units are heavy and may be hazardous. Great care MUST be taken to avoid injury

More information

Curtain Wall Installation Guide

Curtain Wall Installation Guide Curtain Wall Installation Guide Curtain Wall Installation Guide 1 IMPORTANT NOTICES! Important Notices & Information Manufacturer s Notes: The building envelope must be correctly prepared with weather

More information

Installation Guide. Evolve bi-fold. 8. Door restrictor- optional p9. 1. Before you start p2. 9. Adjustment. 2. Measuring and surveying p2

Installation Guide. Evolve bi-fold. 8. Door restrictor- optional p9. 1. Before you start p2. 9. Adjustment. 2. Measuring and surveying p2 Evolve bi-fold Installation Guide 1. Before you start p2 8. Door restrictor- optional p9 2. Measuring and surveying p2 3. Configuration details p4 4. Installation p5 5. Glazing p5 6. Glazing packer details

More information

All dimensions given are final dimensions after the surface of the sections has been treated (painted, powder coated etc.)!

All dimensions given are final dimensions after the surface of the sections has been treated (painted, powder coated etc.)! ALU-DK/TBT 200 The screw-fixed tilt & turn hardware for aluminium windows and patio doors Always check the planning manual on aluminium (H4006.3042EN) for further details and specifications/information

More information

Cardo DOOR & RETURN SHOWER ENCLOSURE INSTALLATION PLEASE READ THESE INSTRUCTIONS CAREFULLY.

Cardo DOOR & RETURN SHOWER ENCLOSURE INSTALLATION PLEASE READ THESE INSTRUCTIONS CAREFULLY. Cardo DOOR & RETURN SHOWER ENCLOSURE INSTALLATION PLEASE READ THESE INSTRUCTIONS CAREFULLY. IT IS RECOMMENDED TO USE A TRAINED SHOWER INSTALLER FOR THIS SHOWER TO OBTAIN THE BEST INSTALLATION. D Square

More information

Architect: Daluz/González Architekten Photo: Peter Baracchi CP 155 SLIDING DOOR INSTALLATION GUIDE. Edition 15/21

Architect: Daluz/González Architekten Photo: Peter Baracchi CP 155 SLIDING DOOR INSTALLATION GUIDE. Edition 15/21 Architect: Daluz/González Architekten Photo: Peter Baracchi CP 155 SLIDING DOOR INSTALLATION GUIDE Edition 15/21 INDEX 1. IMPORTANT INFORMATION... 4 1.1. Lift & slide door overview... 5 1.2. Details...

More information

Architectural Information Page: Series 514 Double-hung Window Standard Wrap Around Sash Introduction

Architectural Information Page: Series 514 Double-hung Window Standard Wrap Around Sash Introduction Design Features Architectural Information Page: 22. 1 Standard Wrap Around Sash Introduction Scale: Not to scale 1. Successfully tested for compliance with Australian Standard AS 2047. 2. Optional mullion

More information

UPVC. Retrofit. Product Brochure. made easy.

UPVC. Retrofit. Product Brochure. made easy. Product Brochure www.chameleonhardware.co.uk UPVC Retrofit made easy CONTENTS ABOUT 4-5. 6-7. 8-9. 10-11. 12-13. 14-15. 16-17. 18-19. 20. 21. 22-23. 24. 25. 26. 27-29. 30-39. 40-44. 45. 46. Retrofit MPL

More information

DOOR BiFOLD DOOR SET (3 + 1)

DOOR BiFOLD DOOR SET (3 + 1) 3 4 DOOR BiFOLD DOOR SET (3 + 1) Bespoke and Standard Sizes 3.6M - 3590mm W x 2090mm H 4.0M - 3990mm W x 2090mm H IB73HEP431 - ISSUE B All products must be installed in accordance with accepted good trade

More information

182.1 INTRODUCTION SERIES 462 ARCHITECTURAL COMMERCIAL SLIDING WINDOW. Design Features : Australian Registered Design.

182.1 INTRODUCTION SERIES 462 ARCHITECTURAL COMMERCIAL SLIDING WINDOW. Design Features : Australian Registered Design. INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE Design Features : The 26mm thick heavy duty sliding window sashes have been fitted into custom head and sill and jamb inlay adaptor that snaps

More information

Architectural Information Page: Series 602 Magnum Sliding Window Introduction. Design Features : Date: Aug 03 Replaces: Scale: Not to scale

Architectural Information Page: Series 602 Magnum Sliding Window Introduction. Design Features : Date: Aug 03 Replaces: Scale: Not to scale Design eatures : Architectural Information Page: 17. 1 Introduction Date: Aug 03 Replaces: Scale: Not to scale This high performance sliding window has been designed to complement our existing high quality

More information

B A T H R O O M G L A S S

B A T H R O O M G L A S S mistley B A T H R O O M G L A S S vaug16 Page 2 Thank you for purchasing this Trinity shower screen. Please study these instructions carefully before assembly and installation and check all supplied parts

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.

More information

salto safe 4028 A12 Turn-tilt windows

salto safe 4028 A12 Turn-tilt windows A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General

More information

4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside.

4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside. Effective Date: 10/1/2017 Tools Needed Kit Contents Hardware Kit Safety Glasses Cordless drill Phillips screw bit Two-step drill bit (3/8-1/8 ) utility knife Interior Mullion Exterior Mullion Cover clamps

More information

Pvcu Bi Folding Doors Fitting Instructions.

Pvcu Bi Folding Doors Fitting Instructions. Pvcu Bi Folding Doors Fitting Instructions. THE FOLLOWING INSTRUCTIONS ARE GIVEN IN GOOD FAITH AND ARE FOR GUIDANCE ONLY. NO RESPONSIBILITY WILL BE ACCEPTED FOR ANY MIS- INTERPRETATION. WHEN INSTALLING

More information

Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED

Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED ALCOVE SHOWER Your shower can be installed to open Left hand or Right hand by rotating

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.

More information

L 10 WINDOWS / ROOFLIGHTS / SCREENS / LOUVRES

L 10 WINDOWS / ROOFLIGHTS / SCREENS / LOUVRES L 10 WINDOWS / ROOFLIGHTS / SCREENS / LOUVRES 320 STEEL WINDOWS AND DOORS - Manufacturer: Steel Window Service and Supplies Limited, 30 Oxford Road, London N4 3EY Tel: 020 7272 2294, Fax: 020 7281 2309,

More information

method of build Komfire-75 partitioning system 75mm Steel Stud & Plasterboard Partitioning System with Square Aluminium Cover Trims KOMFORT

method of build Komfire-75 partitioning system 75mm Steel Stud & Plasterboard Partitioning System with Square Aluminium Cover Trims KOMFORT 821 811 342 821 835 853 863 840 12.5mm Plasterboard 837 75mm Steel Stud & Plasterboard Partitioning System with Square Aluminium Cover Trims Note: For clarity the cavity infill has not been shown 854 342

More information

Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation.

Read guide from beginning to end before starting installation. Read all warnings and cautions during unit installation. Installation Guide for E-Series/Eagle High-Performance Mullion Windows with LVL Reinforcement and Installed Using Type B Clips Thank you for choosing Andersen. Instructions are for typical, new wood-framed

More information

Side Light Frame Pack Assembly Instructions

Side Light Frame Pack Assembly Instructions Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow the step by step guide. IDENTIFY THE PACK CONTENTS

More information

PVC-u Product Installation Guidelines

PVC-u Product Installation Guidelines PVC-u Product Installation Guidelines All upvc Window, Door and Conservatory products must be fitted in accordance with current codes of practice. Current Codes of Practice British Plastics Window Federation

More information

Hinge Door + Inline Panel + Return Panel

Hinge Door + Inline Panel + Return Panel Hinge Door + Inline Panel + Return Panel Instruction Manual DXL2HDR + DXL2HR + DXR Important Information Toughened glass is completely safe for use in our shower enclosures and bath screens; providing

More information

Side Light Frame Pack Assembly Instructions

Side Light Frame Pack Assembly Instructions Side Light Frame Pack Assembly Instructions Please read this complete set of assembly instructions before starting the installation and only when you understand the construction method start to follow

More information

Series 626 FrontGLAZE Framing

Series 626 FrontGLAZE Framing Double Glazed 150mm COMMERCIAL FRAMING Charles Sturt University Learning Commons Building. Architect: JWP (Jovaras Westland Partnership). Windows by DLG Aluminium & Glazing. DATE: MAY 2013 REPLACES: MARCH

More information

Folding Sliding Door. Catalogue

Folding Sliding Door. Catalogue Folding Sliding Door Catalogue unless otherwise marked FLAT HANDLE Box Qty: 10 FSFHB MOLE SECURITY HANDLE Chrome 1 x heavy duty handle set comprising of stainless steel mole security jacket, 2 silver screws

More information

PVCu FOLD & SLIDE DOOR OUTWARD OPENING

PVCu FOLD & SLIDE DOOR OUTWARD OPENING PVCu FOLD & SLIDE DOOR OUTWARD OPENING STEP-BY-STEP FULLY ILLUSTRATED ASSEMBLY INSTRUCTIONS This product is covered by a 10 year manufacturer s guarantee. Should any part of it become defective due to

More information

Design Features INTRODUCTION SERIES 702 PERFORMANCE SlideMASTER SLIDING DOOR. Australian Registered Design

Design Features INTRODUCTION SERIES 702 PERFORMANCE SlideMASTER SLIDING DOOR. Australian Registered Design Design Features INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE This high performance sliding door has been tested for compliance with the relevant Australian Standards. Achieved a very high

More information

IPA FITTINGS FOR SCHÜCO ALU INSIDE NORDIC A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)

IPA FITTINGS FOR SCHÜCO ALU INSIDE NORDIC A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45) IPA FITTINGS FOR SCHÜCO ALU INSIDE NORDIC 2017 A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45) 98 35 15 00 3 FITTINGS FOR SCHÜCO ALU INSIDE NORDIC Table of contents PAGE SCHÜCO

More information

Test Report. Test Report Smart Systems Limited incorporating Smart Extrusions. Page 1 of 58

Test Report. Test Report Smart Systems Limited incorporating Smart Extrusions. Page 1 of 58 Test Report 8421006. Smart Systems Limited incorporating Smart Extrusions Page 1 of 58 Introduction. This report has been prepared by Adam Pearce and relates to the activity detailed below: Job/Registration

More information

STII. Commercial Door

STII. Commercial Door Commercial Door System and hardware working together to simplify fabrication Since its launch, the STII door has been recognised as an exceptional product in terms of performance and fabrication. STII

More information

GENERAL INSTALLATION GUIDELINES

GENERAL INSTALLATION GUIDELINES 1551 MT. ROSE AVENUE YORK PA 17403-2909 (717) 849-8100 GENERAL INSTALLATION GUIDELINES For Receptor Systems Approved 08/31/2018 Installation Guideline Disclaimer This document contains general installation

More information

05/11. CI/SfB (22) fire & sound. tenon. A cost effective performer.

05/11. CI/SfB (22) fire & sound. tenon. A cost effective performer. CI/SfB 05/11 (22) fire & sound tenon A cost effective performer fire & sound tenon fire & sound at a glance BOARD ROOMS EXECUTIVE OFFICE SUITES CONFERENCE SUITES GENERAL OFFICE CLEAN ROOMS LIGHT INDUSTRIAL

More information

Sun Control-Solar Eclipse-Solar Shelf

Sun Control-Solar Eclipse-Solar Shelf Sun Control-Solar Eclipse-Solar Shelf Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! TABLE OF CONTENTS GENERAL INFORMATION Product Use...Page 3 Protection and Storage...Page

More information

Contents. Stage 1. Preparation of the aperture 9. Interior finishing 25

Contents. Stage 1. Preparation of the aperture 9. Interior finishing 25 Installation Manual Pitchglaze Roof Window Contents Contents and introduction 2 Delivery 3 Pre Installation 4 Installation 8 Stage 1. Preparation of the aperture 9 Stage 2. Fitting the Pitchglaze 11 Stage

More information

Block Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5.

Block Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5. Effective Date: 10/1/17 Tools Needed Kit Contents Safety Glasses Cordless Drill Phillips Screw Bit Two-step Drill Bit (3/8-1/8 ) Utility Knife Interior Mullion Exterior Mullion Cover Hardware Kit Clamps

More information

Installation Guide Simplicity 16. V2.9 Lu171117

Installation Guide Simplicity 16. V2.9 Lu171117 0845 869 6006 www.canoports.co.uk Installation Guide Simplicity 16 V2.9 Lu171117 Tools Required Below is a list of tools that you will require to install the Simplicity 16 Canopy or Carport. Cordless Drill

More information

14000 I/O Series Flush Glaze. Fabrication and Installation Instructions

14000 I/O Series Flush Glaze. Fabrication and Installation Instructions 14000 I/O Series Flush Glaze Fabrication and Installation Instructions Last saved on 12/18/2009 Table of Contents GENERAL CONSTRUCTION NOTES...3 EXTRUDED ALUMINUM PARTS...4 ACCESSORIES...5 OVERVIEW...6

More information

MACO ESPAGS ESPAGNOLETTES

MACO ESPAGS ESPAGNOLETTES MACO ESPAGS ESPAGNOLETTES Product Specification Guide Features Rapid-Fit shootbolt system. Single piece telescopic design. All screw fixings on one face. Reduced screw fixings. Central mushroom cams. Compression

More information

window installation TECHNICAL GUIDE Everbrite House, Greenway, Harlow Business Park, Harlow, Essex CM19 5QJ

window installation TECHNICAL GUIDE Everbrite House, Greenway, Harlow Business Park, Harlow, Essex CM19 5QJ TECHNICAL GUIDE window installation Everbrite House, Greenway, Harlow Business Park, Harlow, Essex CM19 5QJ T: 0845 4567668 F: 01279 629924 E: info@everbritedirect.com PART OF THE EVERBRITE GROUP CMS 1065*

More information

Sliding Glass Door Assembly and Installation Guide

Sliding Glass Door Assembly and Installation Guide Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all

More information

GROWING BETTER THROUGH DESIGN. 6ft Lean-To LEAN-TO. Assembly Instructions 04/02

GROWING BETTER THROUGH DESIGN. 6ft Lean-To LEAN-TO. Assembly Instructions 04/02 GROWING BETTER THROUGH DESIGN 6ft Lean-To LEAN-TO Assembly Instructions 04/02 6ft Lean-To Greenhouse Base Plan Introduction/Tools/Contents / / Contents This is a copy of our Lean-To greenhouse base plan.

More information

KEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM

KEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation Information

More information

DUALCASE VERSATILE ALUMINIUM SIGN SYSTEM

DUALCASE VERSATILE ALUMINIUM SIGN SYSTEM VERSATILE ALUMINIUM SIGN SYSTEM Universal Components Ltd. May 2007 Introduction Nothing beats DualCase for speed of fabrication, aesthetic appearance and easy maintenance. With the minium of components

More information

window installation Guide wood FRaMinG New Construction

window installation Guide wood FRaMinG New Construction window installation Guide wood FRaMinG New Construction IMPORTANT NOTICES AND INFORMATION Read these instructions in their entirety prior to installing windows. Any local building code requirements supersede

More information

GENERAL INSTALLATION GUIDELINES

GENERAL INSTALLATION GUIDELINES 1551 MT. ROSE AVENUE YORK PA 17403-2909 (717) 849-8100 GENERAL INSTALLATION GUIDELINES For Receptor Systems Approved 9/29/2017 Installation Guideline Disclaimer This document contains general installation

More information

INFINITE RANGE - HINGE DOOR

INFINITE RANGE - HINGE DOOR INFINITE RANGE - HINGE DOOR HINGE DOOR + 1 SIDE RETURN PANEL (CORNER) Please read these instructions before installing, as incorrect fitting will invalidate the guarantee-carry out each stage before moving

More information

PANATRIM AND UNITRIM.

PANATRIM AND UNITRIM. PANATRIM AND UNITRIM aluminium sign systems spec FAST TO FABRICATE, EASY TO INSTALL AND UNBEATABLY COST EFFECTIVE - THATS THE COMBINATION THAT HAS MADE PANATRIM ONE OF THE WORLDS MOST POPULAR AND WIDELY

More information

CI/SfB 11/12 (22) fire & sound A cost effective performer fire & sound Areas of use L IA L IN IGH DU T ST R G OF EN FI ERA CE L fire & sound at a glance E OF XEC FI UT CE IV SU E IT ES CO SU N IT FER ES

More information

Steel Reinforced Joining Thank you for choosing Andersen. Please leave this guide with building owner.

Steel Reinforced Joining Thank you for choosing Andersen. Please leave this guide with building owner. Steel Reinforced Joining (Horizontal/Vertical) for Andersen 400 Series Woodwright & Tilt-Wash Double-Hung, Picture, and Transom Windows and 400 Series Double-Hung Half Circle and Flexiframe Specialty Windows

More information