DIALux evo Tutorial 10- Using powerful tool copy and arrange

Size: px
Start display at page:

Download "DIALux evo Tutorial 10- Using powerful tool copy and arrange"

Transcription

1 DIALux evo Tutorial 10 Using powerful tool-copy and arrange This tutorial was made by DIALux evo 4 to explain the powerful tool of copy and arrange tool Also you could see DIALux evo Tutorial 5 If you don t have any experience with DIALux evo, I advise you to start with DIALux evo Tutorial 4 which explains more basic function of the software that might not be explained here, DIALux evo Tutorial 4 could be ezzatbaroudi@yahoo.com 1

2 To explain this tutorial I will take an example of staircase and spiral staircase which could be made easy by using the following steps Create a stair step with dimension 1500 mm x 300 mm and height of 150 mm While selecting the object, go to copy and arrange tool and select copy along a line, If you are not selecting the object then you will not see this option. ezzatbaroudi@yahoo.com 2

3 Click on the arrow to see more options for distance and apply 0.3 for x and 0.15 for z Quantity 20 and apply Now you have made this in very easy way. You can create a room and duplicate story Then you can use cut out to make staircase opening in DIALux evo For more details check DIALux evo Tutorial 5 in my weblog ezzatbaroudi@yahoo.com 3

4 Now let s make more complex stair like spiral staircase Create a room with 10 meter height (ideally two room or 3 with cut out in this ceiling ) To make it simple for this tutorial make one room with height of 10 meter Create a stair step with dimension 1500 mm x 300 mm and height of 150 mm Draw a circle reference line with radius of 1 meter ezzatbaroudi@yahoo.com 4

5 Select the stair step and go to copy and Arrange tool click on copy along existing reference line. if you see option is not active change the view from room to story view Click on the circle you made and then put quantity 60, then click on follow curve shape, finally apply. Some time you have to change the rotation offset to different angle to get it right. Now you made the spiral stair steps but all are in one level. 5

6 Select one of the steps by clicking twice First click will select all the steps Second click will select individual one Go to object and make the Z position 9 m ezzatbaroudi@yahoo.com 6

7 Use Esc key to escape individual selection to select all elements. 7

8 While selecting the group of objects go to copy and arrange tool and click on distribute evenly (Z) Now you should be having similar view to what is shown here, however the top step is weird looking so select it and bring it down 8

9 This step is very critical you should bring down to its normal position between the steps. Just bring it down vertically to be between steps. If you find the previous step is not easy then try the alternative way Select the upper step and the lower step where you find a gap between steps Zoom and rotate to find the right one. ezzatbaroudi@yahoo.com 9

10 While selecting both steps go to copy and arrange tool and click on Align bottom(z) Use Esc to deactivate individual selection then select to grope of elements After that go to copy and arrange tool and repeat click on distribute evenly (Z) Now you have the steps aligned perfectly. By the way you can delete the first stair step that you made it to create this spiral stair. Enjoy planning the lighting! Using this powerful tool is good for any objects and furniture to make modeling very easy You could also use this for lighting arrangements. In the next example I will use a wallwasher to wash a curved wall ezzatbaroudi@yahoo.com 10

11 Import an AutoCAD drawing with a curved wall after you make in AutoCAD an offset wall with one meter (ideal for washing a wall with 3 meter height) After creating the room insert a wallwasher For this tutorial I used ERCO After inserting the luminaire, make sure that the show light distribution curves is active form the display options in the upper right corner. Draw a curving reference line following the offset line of the imported drawing. Go to copy and arrange tool and select the wallwasher then click on copy along existing reference line. And move the mouse cursor to the curved line you made if you see option is not active change the view from room to story view after that put the quantity so that you have a distance close to 1 meter, in this example it is 6 with meter spacing. Select Follow curve shape. then you have to select the right angle for here it is 90 o ezzatbaroudi@yahoo.com 11

12 If you don t not the right rotation then you have to use the trial and error method till you get it right(try different angles until you have the light side to the wall) Then delete the first luminaire To make calculation faster go to Light scenes tool and click on Combine luminaire groups with the same dimming values, so you have one instead of 6 in this example. Now you should have evenly distributed lighting on the curved wall. You can also use this for any light arrangement like grazing and light scalloping effect. ezzatbaroudi@yahoo.com 12

13 DIALux evo is easier than DIALux 4 for lighting designers and light planner which make the light planning easier and faster by using the powerful tools of copy and arrange tool. Use your imagination to use this powerful tool whenever is required ezzatbaroudi@yahoo.com 13

There are two types of cove light in terms of light distribution inside a room

There are two types of cove light in terms of light distribution inside a room DIALux evo Tutorials Tutorial 2 How to create a cove light detail In this tutorial you will learn the following commands. 1. Using help lines 2. Using ceiling. 3. Using cutout 4. Using Boolean operation

More information

How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image

How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other

More information

LdG-2 Lighting design Guide for Vertical Surfaces

LdG-2 Lighting design Guide for Vertical Surfaces LdG-2 Vertical Illuminance Introduction When I first started my career, I was told by many Engineers that light planning is only a matter of calculation the light on working plane which is in most cases

More information

Tutorial Building the Nave Arcade

Tutorial Building the Nave Arcade Tutorial: Digital Gothic AH C117B (Winter 2017) Tutorial Building the Nave Arcade Overview: Step 1: Determining and Drawing The Arch (Quinto Arch) Step 2: Extrude Molding Profile Step 3: Adding Walls Step

More information

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000

More information

This section will take you through the process of drawing an oblique block. Your entire part, in all views, should look like Figure 1.

This section will take you through the process of drawing an oblique block. Your entire part, in all views, should look like Figure 1. Oblique Block Preface This section will take you through the process of drawing an oblique block. Your entire part, in all views, should look like Figure 1. Figure 1 68 / 3D Scripted Drawings: Oblique

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

This section will take you through the process of drawing a fixture base. Your entire part, in all views, should look like Figure 1.

This section will take you through the process of drawing a fixture base. Your entire part, in all views, should look like Figure 1. Fixture Base Preface This section will take you through the process of drawing a fixture base. Your entire part, in all views, should look like Figure 1. Figure 1 92 / Scripted 3D Drawings: Fixture Base

More information

[EC202 AutoCAD Topic Dimension] DEC 2010

[EC202 AutoCAD Topic Dimension] DEC 2010 DIMENSIONING OBJECTIVES At the end of the unit you will be able to: Create linear dimensions with DIMLINEAR, DIMCONTINUE, DIMBASELINE, DIMALIGNED. Create radial dimensions with DIMDIAMETER and DIMRADIUS.

More information

4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp

4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp Intersection 2D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b)

More information

Creo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School

Creo: Hole, Fillet, and Round Layout/Dimension Tutorial. By: Matthew Jourden Brighton High School Creo: Hole, Fillet, and Round Layout/Dimension Tutorial Layout of a Part with Holes 1. Open a blank drawing with your border and title block By: Matthew Jourden Brighton High School 2. Place the front,

More information

Revit Structure 2013 Basics

Revit Structure 2013 Basics Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

More information

BIM - ARCHITECTUAL IMPORTING A SCANNED PLAN

BIM - ARCHITECTUAL IMPORTING A SCANNED PLAN BIM - ARCHITECTUAL IMPORTING A SCANNED PLAN INTRODUCTION In this section, we will demonstrate importing a plan created in another application. One of the most common starting points for a project is from

More information

CAD Orientation (Mechanical and Architectural CAD)

CAD Orientation (Mechanical and Architectural CAD) Design and Drafting Description This is an introductory computer aided design (CAD) activity designed to give students the foundational skills required to complete future lessons. Students will learn all

More information

EG1003 Help and How To s: Revit Tutorial

EG1003 Help and How To s: Revit Tutorial EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,

More information

Cube in a cube Fusion 360 tutorial

Cube in a cube Fusion 360 tutorial Cube in a cube Fusion 360 tutorial n Before using these instructions, it is helpful to watch this video screencast of the CAD drawing actually being done in the software. Click to link to the video tutorial.

More information

Draw IT 2016 for AutoCAD

Draw IT 2016 for AutoCAD Draw IT 2016 for AutoCAD Tutorial for System Scaffolding Version: 16.0 Copyright Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Getting Started...

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

Architecture 2012 Fundamentals

Architecture 2012 Fundamentals Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit

More information

Getting Started. with Easy Blue Print

Getting Started. with Easy Blue Print Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the

More information

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry 2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply

More information

TOY TRUCK. Figure 1. Orthographic projections of project.

TOY TRUCK. Figure 1. Orthographic projections of project. TOY TRUCK Prepared by: Harry Hawkins The following project is of a small, wooden toy truck. This exercise will provide you with the procedure for constructing the various parts of the design then assembling

More information

Photoshop CS6 automatically places a crop box and handles around the image. Click and drag the handles to resize the crop box.

Photoshop CS6 automatically places a crop box and handles around the image. Click and drag the handles to resize the crop box. CROPPING IMAGES In Photoshop CS6 One of the great new features in Photoshop CS6 is the improved and enhanced Crop Tool. If you ve been using earlier versions of Photoshop to crop your photos, you ll find

More information

dialux dialux 2.0 CAD dialux 2.0

dialux dialux 2.0 CAD dialux 2.0 dialux 20 dialux 20 CAD - - - - dialux 20 CAD CAD ((zoom)) 3D (ground plan) 3D (( roam))(( move))(( (side) zoom)) (( rotate)) ((move)) ((PAN)) (wheel mouse) (wheel) dialux 20 CAD context 3D CAD context

More information

Relative Coordinates

Relative Coordinates AutoCAD Essentials Most drawings are created using relative coordinates. This means that the next point is set from the last point drawn. The last point drawn is stored as temporary 0,0". AutoCAD uses

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

Chapter 5 Sectional Views

Chapter 5 Sectional Views Chapter 5 Sectional Views There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved

More information

Modeling Basic Mechanical Components #1 Tie-Wrap Clip

Modeling Basic Mechanical Components #1 Tie-Wrap Clip Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely

More information

Drawing the Red Christmas Bell

Drawing the Red Christmas Bell Vector 3D Christmas Bells Thinking of drawing some Christmas bells for this Christmas? Read this illustrator tutorial to learn how to draw 5 different styles of vector Christmas bells using the 3D Revolve

More information

Dimensioning the Rectangular Problem

Dimensioning the Rectangular Problem C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing

More information

8 Working Drawings in AutoCAD

8 Working Drawings in AutoCAD 8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of

More information

AutoCAD Civil 3D 2009 ESSENTIALS

AutoCAD Civil 3D 2009 ESSENTIALS AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how

More information

ARCHLine.XP Interior Windows. Learning Interior. Learning material for the basics of ARCHLine.XP Interior. ARCHLine.

ARCHLine.XP Interior Windows. Learning Interior. Learning material for the basics of ARCHLine.XP Interior. ARCHLine. ARCHLine.XP Interior 2010 Windows Learning Interior Learning material for the basics of ARCHLine.XP Interior ARCHLine.XP Interior Information in this document is subject to change without notice and does

More information

Tutorial 2: Setting up the Drawing Environment

Tutorial 2: Setting up the Drawing Environment Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we

More information

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008

Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008 1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical

More information

progecad EasyArch Note: Download a Free 30-Day Trial of progecad Professional (including EasyArch) at: Summary CADDIT 7/27/2011

progecad EasyArch Note: Download a Free 30-Day Trial of progecad Professional (including EasyArch) at:  Summary CADDIT 7/27/2011 progecad EasyArch Summary CADDIT 7/27/2011 Note: Download a Free 30-Day Trial of progecad Professional (including EasyArch) at: www.caddit.net Contents Introduction... 4 Settings... 4 Openings Centreline

More information

The Revolve Feature and Assembly Modeling

The Revolve Feature and Assembly Modeling The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling

More information

Drawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum.

Drawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum. Page 1 of 6 Introduction The drawing used for this tutorial comes from Clark R. and M.Pause, "Precedents in Architecture", VNR 1985, page 135. Stephen Peter of the University of South Wales developed the

More information

Part 1- Fundamental Functions

Part 1- Fundamental Functions Part 1- Fundamental Functions Note: Alt+Tab will allow you to move between programs in the docker. Shift+Tab removes right pallets Tab removes all pallets Ctrl+1= centers art board Ctrl + 0= fill window

More information

PowerEn.ir CAD. 3D,(ground plan) (wheel mouse) (wheel) dialux 2.0

PowerEn.ir CAD. 3D,(ground plan) (wheel mouse) (wheel) dialux 2.0 PowerEnir CAD CAD ((zoom)) 3D (ground plan) 3D (( roam))(( move))(( (side) zoom)) (( rotate)) ((move)) ((PAN)) (wheel mouse) (wheel) dialux 20 PowerEnir CAD context 3D CAD context ((Dxf )) (insert) context

More information

Start from Scratch Open Photoshop.

Start from Scratch Open Photoshop. Mr. Manders Repeating Patterns (Developed by Mr. Kasten) Our goals in this activity: To understand the similarities and differences working with the shape tools vs the marquee tools in Photoshop. It can

More information

Deck Tutorial. Chapter 8: Decks and Porches

Deck Tutorial. Chapter 8: Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to

More information

Deck Tutorial. Chapter 6: Decks and Porches

Deck Tutorial. Chapter 6: Decks and Porches Chapter 6: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase. You may want to

More information

AutoCAD 2D. Table of Contents. Lesson 1 Getting Started

AutoCAD 2D. Table of Contents. Lesson 1 Getting Started AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Inventor-Parts-Tutorial By: Dor Ashur

Inventor-Parts-Tutorial By: Dor Ashur Inventor-Parts-Tutorial By: Dor Ashur For Assignment: http://www.maelabs.ucsd.edu/mae3/assignments/cad/inventor_parts.pdf Open Autodesk Inventor: Start-> All Programs -> Autodesk -> Autodesk Inventor 2010

More information

Drawing a Living Room and Family Room Floorplan

Drawing a Living Room and Family Room Floorplan Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs

More information

CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...

CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,

More information

Stitch n Bloom Jacket

Stitch n Bloom Jacket Stitch n Bloom Jacket Created by Debra Rutledge This all-over floral arrangement is designed for embellishing a ready-made denim jacket, but may be easily modified to accommodate any jacket style. Supplies

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

Room 2D/3D Diagram Demo

Room 2D/3D Diagram Demo Room 2D/3D Diagram Demo PART 1) Basic Room Layout (2D) 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud

More information

AutoDesk Inventor: Creating Working Drawings

AutoDesk Inventor: Creating Working Drawings AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working

More information

CAD Tutorial 24: Step by Step Guide

CAD Tutorial 24: Step by Step Guide CAD TUTORIAL 24: Step by step CAD Tutorial 24: Step by Step Guide Level of Difficulty Time Approximately 40 50 minutes Lesson Objectives To understand the basic tools used in SketchUp. To understand the

More information

Create A Mug. Skills Learned. Settings Sketching 3-D Features. Revolve Offset Plane Sweep Fillet Decal* Offset Arc

Create A Mug. Skills Learned. Settings Sketching 3-D Features. Revolve Offset Plane Sweep Fillet Decal* Offset Arc Create A Mug Skills Learned Settings Sketching 3-D Features Slice Line Tool Offset Arc Revolve Offset Plane Sweep Fillet Decal* Tutorial: Creating A Custom Mug There are somethings in this world that have

More information

Vectorworks / MiniCAD Tutorials

Vectorworks / MiniCAD Tutorials Vectorworks / MiniCAD Tutorials Tutorial 1: Construct a simple model of a little house Tutorial 2: Construct a 4 view Orthographic drawing of the Model These tutorials are available as Adobe Acrobat 4

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

SolidWorks Tutorial 1. Axis

SolidWorks Tutorial 1. Axis SolidWorks Tutorial 1 Axis Axis This first exercise provides an introduction to SolidWorks software. First, we will design and draw a simple part: an axis with different diameters. You will learn how to

More information

For more information on STAIRDESIGNER please visit www. Stairdesignsoftware.net

For more information on STAIRDESIGNER please visit www. Stairdesignsoftware.net Getting Started with Stair Designer Software Introduction If you are reading this you are interested in stair building, either as a professional stair builder, carpenter or architect or as an amateur woodworker

More information

Introduction to CATIA V5

Introduction to CATIA V5 Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower

More information

Sketch-Up Guide for Woodworkers

Sketch-Up Guide for Woodworkers W Enjoy this selection from Sketch-Up Guide for Woodworkers In just seconds, you can enjoy this ebook of Sketch-Up Guide for Woodworkers. SketchUp Guide for BUY NOW! Google See how our magazine makes you

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

Creo Revolve Tutorial

Creo Revolve Tutorial Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate

More information

1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.

1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define. BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Control + Click HERE to view enlarged IMAGE and Construction Strategy he following set of

More information

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1

Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch

More information

An Introduction to Dimensioning Dimension Elements-

An Introduction to Dimensioning Dimension Elements- An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements

More information

ACAD-BAU TUTORIAL For BricsCAD platform

ACAD-BAU TUTORIAL   For BricsCAD platform ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.

More information

Deck Tutorial. Chapter 8: Decks and Porches

Deck Tutorial. Chapter 8: Decks and Porches Decks and Porches Chapter 8: Deck Tutorial Now we ll continue where the Landscaping Tutorial left off and create a deck off the back of the house, connecting it to the terrain with an exterior staircase.

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Getting Started. Right click on Lateral Workplane. Left Click on New Sketch

Getting Started. Right click on Lateral Workplane. Left Click on New Sketch Getting Started 1. Open up PTC Pro/Desktop by either double clicking the icon or through the Start button and in Programs. 2. Once Pro/Desktop is open select File > New > Design 3. Close the Pallet window

More information

Deck Tutorial. Decks and Porches. Drawing Decks

Deck Tutorial. Decks and Porches. Drawing Decks Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.

More information

Part 8: The Front Cover

Part 8: The Front Cover Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Sashiko-Style Sampler

Sashiko-Style Sampler Sashiko-Style Sampler Created by Debbi Lashbrook Sashiko, traditionally a Japanese hand embroidery technique, can be imitated using BERNINA Embroidery Software 7 and your embroidery machine. The simple,

More information

12. Creating a Product Mockup in Perspective

12. Creating a Product Mockup in Perspective 12. Creating a Product Mockup in Perspective Lesson overview In this lesson, you ll learn how to do the following: Understand perspective drawing. Use grid presets. Adjust the perspective grid. Draw and

More information

For more information on stair building please visit my web site :

For more information on stair building please visit my web site : Copying and distribution of this article is not permitted : page 1/73 Table of Contents Tangent Hand Railing Using StairDesigner and 3D CADD... 3 An Over View... 3 Starting and Setting up the ProgeCad/Autocad

More information

CAD tutorial for the drinking straw support

CAD tutorial for the drinking straw support CAD tutorial for the drinking straw support Having tried a number of different designs, this one worked best on the greatest variety of glasses straight sided glass, angled glass and even a champagne flute.

More information

Modeling an Airframe Tutorial

Modeling an Airframe Tutorial EAA SOLIDWORKS University p 1/11 Difficulty: Intermediate Time: 1 hour As an Intermediate Tutorial, it is assumed that you have completed the Quick Start Tutorial and know how to sketch in 2D and 3D. If

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

Deck Tutorial. Decks and Porches. Drawing Decks

Deck Tutorial. Decks and Porches. Drawing Decks Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.

More information

Existing and Design Profiles

Existing and Design Profiles NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles

More information

BERNINA Embroidery Software 6 for the Garment-Maker

BERNINA Embroidery Software 6 for the Garment-Maker BERNINA Embroidery Software 6 for the Garment-Maker BERNINA Embroidery software makes garment-making and embellishing fast and easy using basic tools in the software. Scanning You may choose to use the

More information

Getting Started with. Vectorworks Architect

Getting Started with. Vectorworks Architect Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Drawing with precision

Drawing with precision Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial

More information

Chief Architect New Feature List

Chief Architect New Feature List SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files

More information

Table of Contents. Lesson 1 Getting Started

Table of Contents. Lesson 1 Getting Started NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard

More information

Using the Ruler Tool to Keep Your Tracks Straight Revised November 2008

Using the Ruler Tool to Keep Your Tracks Straight Revised November 2008 Using the Ruler Tool to Keep Your Tracks Straight Revised November 2008 Suppose you had to lay a section of track 8000 feet (2424m) long. The track will include a station and several industrial sidings.

More information

Creo Extrude Tutorial 3: Hole, Fillets and Rounds

Creo Extrude Tutorial 3: Hole, Fillets and Rounds Creo Extrude Tutorial 3: Hole, Fillets and Rounds By: Matthew Jourden Brighton High School 1. Open Creo Parametric 2. File > Open > extrudetutorial (From Creo Extrude Tutorial 1) NOTE: Minimum of 2 other

More information

AreaSketch Pro Overview for ClickForms Users

AreaSketch Pro Overview for ClickForms Users AreaSketch Pro Overview for ClickForms Users Designed for Real Property Specialist Designed specifically for field professionals required to draw an accurate sketch and calculate the area and perimeter

More information

Using Google SketchUp

Using Google SketchUp Using Google SketchUp Opening sketchup 1. From the program menu click on the SketchUp 8 folder and select 3. From the Template Selection select Architectural Design Millimeters. 2. The Welcome to SketchUp

More information

Getting Started. Before You Begin, make sure you customized the following settings:

Getting Started. Before You Begin, make sure you customized the following settings: Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides

More information

Build the clerestory of Chartres Cathedral

Build the clerestory of Chartres Cathedral Build the clerestory of Chartres Cathedral Overview: Step 1. Create a new Design Layer Step 2. Build the wall Step 3. Build the lancets Step 4. Build the rose window Step 5. Build the rose window quatrefoils

More information

MEASUREMENT CAMERA USER GUIDE

MEASUREMENT CAMERA USER GUIDE How to use your Aven camera s imaging and measurement tools Part 1 of this guide identifies software icons for on-screen functions, camera settings and measurement tools. Part 2 provides step-by-step operating

More information

Quick Start - ProDESKTOP

Quick Start - ProDESKTOP Quick Start - ProDESKTOP Tim Brotherhood ProDESKTOP page 1 of 27 Written by Tim Brotherhood These materials are 2000 Staffordshire County Council. Conditions of use Copying and use of these materials is

More information

Floorplanner Editor Manual

Floorplanner Editor Manual Editor Manual Floorplanner Editor Manual 1 Overview 2 Canvas a 2D view b View Settings 3 3D view a Orbital and walkthrough mode b How to navigate c Adding cameras d Scenery image e Create a render 4 Sidebar

More information

ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS. Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc.

ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS. Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc. ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc. WELCOME TO THE ILLUSTRATOR TUTORIAL FOR SCULPTURE DUMMIES! This tutorial sets you up for

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information