#SEU PMI and CAM Express

Size: px
Start display at page:

Download "#SEU PMI and CAM Express"

Transcription

1 #SEU 2016 PMI and CAM Express Realize innovation.

2 PMI and CAM Express A PMI Primer Two Methods to Transfer Data Solid Edge Connection JT File transfer Interoperability function (change to a different model) Caveats Page 2

3 PMI Primer Product Manufacturing Information (PMI): Manufacturing Information applied to the 3D CAD model Includes Geometric Dimensioning and Tolerancing (GD&T) Fits and Limits 3D annotation (text) and dimensions Surface finish and material specifications Page 3

4 PMI Primer GD&T is MI applied to a drawing PMI is MI applied to a CAD model Page 4

5 PMI Primer Why is it important? PMI is used in conjunction with the 3D model within model-based definition to allow for the elimination of 2D drawings for data set utilization. Page 5

6 PMI Enables MBD PMI enables Model-Based Definition: 3D Model becomes master for dispute resolution (not drawing) Drawing becomes reference Opposite of Old Methodology Master Reference Page 6

7 PMI Enables MBD PMI enables Model-Based Definition: Manufacturing Engineer Design Engineer Page 7 Inspection Engineer

8 PMI Enables MBD PMI enables Model-Based Definition: Manufacturing Engineer Design Engineer Page 8 Inspection Engineer

9 PMI Enables MBD PMI enables Model-Based Definition: Page 9

10 Transferring Data Across Platforms OK, I get it - PMI is the faster, cheaper, better way to get manufacturing information about the model to downstream users. But, what if I m using non-solid Edge applications for those downstream applications? How does PMI get transferred then? I m glad you asked! Page 10

11 JT Serves as PMI Conduit JT is: A CAD file format developed by Siemens Open-source Lightweight in terms of size Approved by the International Organization for Standardization (ISO) as an International Standard (ISO IS14306) A conduit for PMI Page 11

12 We had a problem Solid Edge Connection Thread Information No PMI JT PMI Add No Thread Information! Page 12

13 Demo Two Methods to Transfer Data Solid Edge Connection JT File transfer Page 13

14 Questions: 1. Why don t dimensions to center of threaded hole come across as recognized PMI? Because Dimension is to center of object, not edge (center is theoretical point, and not selectable) 2. What about annotations to PMI dimensions? Since they are part of PMI, they are still PMI (but no automatic action taken by CAM Express) Page 14

15 Use JT for PMI Transfer between Solid Edge and NX CAM From Solid Edge: Page 15

16 Use JT for PMI Transfer between Solid Edge and NX CAM From Solid Edge: Page 16

17 Use JT for PMI Transfer between Solid Edge and NX CAM From CAM Express: Page 17

18 Use JT for PMI Transfer between Solid Edge and NX CAM From CAM Express: Page 18

19 Use JT for PMI Transfer between Solid Edge and NX CAM From CAM Express: Page 19

20 Potential Uses for PMI Information Use Case 1 Location tolerance for a hole: Loose location tolerance: Center drill or spot drill (perhaps optional) Drill Tight location tolerance: Center drill or spot drill (not optional) Drill undersized Bore for accurate location Feature-Based Machining module in CAM Express allows this today (with some rule changes) Page 20

21 Potential Uses for PMI Information Use Case 2 Size tolerance for a hole: Loose size tolerance: Center drill or spot drill (perhaps optional) Drill Tight location tolerance: Center drill or spot drill (perhaps optional) Drill undersized Ream for accurate size Feature-Based Machining module in CAM Express allows this today (with some rule changes) Page 21

22 Potential Uses for PMI Information Use Case 3 surface finish of a wall (milled with side of tool): No surface finish specification: Rough mill wall and floor Finish mill wall along with floor (cutting both surfaces at once Smooth surface finish specification: Rough mill floor Rough mill wall Finish mill floor Finish mill wall (with special cutter, special speed/feed, multiple passes, spring pass, etc.) Feature-Based Machining module in CAM Express does not allow this today must be done by CNC Programmer Page 22

23 National Institute of Standards and Technology (NIST) U.S. Department of Commerce: Publications Test Cases Comparative Methodology Page 23

24 Enhancement Request There are two enhancement requests to improve JT workflow: ER to request JT file option for Tools-CAM Express (inside Solid Edge) ER to request JT file option for Open Solid Edge File for CAM in CAM Express Page 24

25 Maintain Associativity Demo of two methods: Traditional (Solid Edge Connection) JT Page 25

26 Summary If you don t need/use PMI yet: Continue to use Solid Edge Connection for easiest transfer If you use PMI now: Use JT file transfer mechanism See me about supporting active ERs or filing new ones Let me know of your interest and pain points in this area In either case: Stay up-to-date on PMI initiatives by joining our community Page 26

27 Learn More Additional Information: Siemens white paper on PMI Al Dean article on PMI JT Open Fact Sheet JT Open Technology Sheet NIST website Page 27

28 Contact Information Jim Wright Global Technical Business Development 675 Discovery Drive NW Suite 100 Huntsville, AL Phone: siemens.com Page 28

GETTING YOUR DIGITAL HOUSE IN ORDER

GETTING YOUR DIGITAL HOUSE IN ORDER GETTING YOUR DIGITAL HOUSE IN ORDER STREAMLINING THE MBD AND DETAILING PROCESS WITH CREO Martin Neumüller Creo Product Management PTC Eindhoven, 2017 AGENDA 1. MBD opportunities and challenges 2. Creo

More information

Model Based Definition The future mode of product TPD

Model Based Definition The future mode of product TPD Model Based Definition The future mode of product TPD 11-10- 2018 Leo Broers Project Manager ASML QC DE CSI ASML organization Slide 2 Lithography is the critical tool for producing chips All of the world

More information

Course Summary. CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning

Course Summary. CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning Course Summary CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning NO. COURSE NAME CLASSROOM* WEBINAR ON-DEMAND MBD/MBE EDUCATION

More information

Model-Based Definition using Creo Parametric and GD&T Advisor

Model-Based Definition using Creo Parametric and GD&T Advisor Model-Based Definition using Creo Parametric and GD&T Advisor Ted Anderson Product Line Manager Sigmetrix, LLC Model-Based Definition What is it? Why Model-Based Definition? What tools are required to

More information

QIF and the Future of Digital Metrology

QIF and the Future of Digital Metrology and the Future of Digital Metrology Daniel Campbell Capvidia dc@capvidia.com GPDIS_2016.ppt 1 Overview Current metrology process What is? use cases Capvidia and GPDIS_2016.ppt 2 Modern Software Process:

More information

Product and Manufacturing Information (PMI)

Product and Manufacturing Information (PMI) Product and Manufacturing Information (PMI) 1 Yadav Virendrasingh Sureshnarayan, 2 R.K.Agrawal 1 Student of ME in Product Design and Development,YTCEM -Bhivpuri road-karjat, Maharastra 2 HOD Mechanical

More information

Product and Manufacturing Information(PMI)

Product and Manufacturing Information(PMI) Product and Manufacturing Information(PMI) Ravi Krishnan V 1 Post Graduate Student Department of Mechanical Engineering Veermata Jijabai Technological Institute Mumbai, India ravi.krishnan30@gmail.com

More information

CADValidator: A Critical Aid for the Model-Based Enterprise

CADValidator: A Critical Aid for the Model-Based Enterprise CADValidator: A Critical Aid for the Model-Based Enterprise Abstract Learn the importance of validation for deployment of model-based engineering practices. In addition, understand what functionality is

More information

Session 10 Dimensions, Fits and Tolerances for Assembly

Session 10 Dimensions, Fits and Tolerances for Assembly Session 10 Dimensions, Fits and Tolerances for Assembly Lecture delivered by Prof. M. N. Sudhindra Kumar Professor MSRSAS-Bangalore 1 Variations in Production It is necessary that the dimensions, shape

More information

http://blogs.solidworks.com/solidworksblog/2015/10/mbdimplementation-10-dos-and-10-donts-dont-hesitate-part-1.html Create MBE Vision Plan Identify Data Needs Assess PMI Consumption 3 DimXperts 2D Drawings

More information

Fits and Tolerances. Prof Ahmed Kovacevic

Fits and Tolerances. Prof Ahmed Kovacevic ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 7 Fits and Tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130, Phone: 8780, E-Mail: a.kovacevic@city.ac.uk

More information

Typical Tolerances of Manufacturing Processes

Typical Tolerances of Manufacturing Processes EML 2322L MAE Design and Manufacturing Laboratory Typical Tolerances of Manufacturing Processes In the past, one of the traditional weaknesses with graduating mechanical design engineers is their inability

More information

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration : 4 days Time : 9:00am 5:00pm Methodology : Instructor led Presentation, exercises and discussion Target : Individuals

More information

NAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015

NAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 NAVAIR Non Contact In-Process Inspection Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 Overview Background on Navy 3D Model Status (3MS / MBD) Proposed System Examples Definition of Digital Product

More information

Machine Tool Technology/Machinist CIP Task Grid

Machine Tool Technology/Machinist CIP Task Grid 1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify

More information

Strands & Standards MACHINING 2

Strands & Standards MACHINING 2 Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill

More information

TechniCom, Inc. 970 Clifton Avenue Clifton, NJ USA (973)

TechniCom, Inc. 970 Clifton Avenue Clifton, NJ USA (973) 970 Clifton Avenue Clifton, NJ 07013 USA (973) 470 9110 http://www.technicom.com staff@technicom.com Version 19: Version 19 focuses on global innovation, adding complete functionality for employing JT

More information

Machinist NOA (1998) Subtask to Unit Comparison

Machinist NOA (1998) Subtask to Unit Comparison Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes

More information

DRAFTING MANUAL. Dimensioning and Tolerancing Rules

DRAFTING MANUAL. Dimensioning and Tolerancing Rules Page 1 1.0 General This section is in accordance with ASME Y14.5-2009 Dimensioning and Tolerancing. Note that Rule #1 is the only rule that is numbered in the 2009 standard. All of the other rules fall

More information

Engineers, are you industry-ready? offers

Engineers, are you industry-ready? offers Engineers, are you industry-ready? Technology Centre Indian Machine Tool Manufacturers' Association offers FINISHING SCHOOL IN PRODUCTION ENGINEERING About IMTMA Technology Centre: Indian Machine Tool

More information

Design Guide: CNC Machining VERSION 3.4

Design Guide: CNC Machining VERSION 3.4 Design Guide: CNC Machining VERSION 3.4 CNC GUIDE V3.4 Table of Contents Overview...3 Tolerances...4 General Tolerances...4 Part Tolerances...5 Size Limitations...6 Milling...6 Lathe...6 Material Selection...7

More information

Representation of features Geometric tolerances. Prof Ahmed Kovacevic

Representation of features Geometric tolerances. Prof Ahmed Kovacevic ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 6 Representation of features Geometric tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130,

More information

NX CAM Update and future directions The latest technology advances Dr. Tom van t Erve

NX CAM Update and future directions The latest technology advances Dr. Tom van t Erve NX CAM Update and future directions The latest technology advances Dr. Tom van t Erve Restricted Siemens AG 2017 Realize innovation. NX for manufacturing Key capabilities overview Mold and die machining

More information

Machining I DESCRIPTION. EXAM INFORMATION Items

Machining I DESCRIPTION. EXAM INFORMATION Items EXAM INFORMATION Items 50 Points 62 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble,

More information

MACHINIST TECHNICIAN - LATHE (582)

MACHINIST TECHNICIAN - LATHE (582) DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,

More information

How PMI and Data Modeling Standards Affect Successful Implementation of 3D MBD/MBE

How PMI and Data Modeling Standards Affect Successful Implementation of 3D MBD/MBE How PMI and Data Modeling Standards Affect Successful Implementation of 3D MBD/MBE Understanding and Managing Risk in Implementation and Transition Bryan R. Fischer Advanced Dimensional Management LLC

More information

David Odendahl Boeing Associate Technical Fellow IT Engineering September 19, 2017

David Odendahl Boeing Associate Technical Fellow IT Engineering September 19, 2017 David Odendahl Boeing Associate Technical Fellow IT Engineering September 19, 2017 ROI # 17-00643-CORP GPDIS_2017.ppt 1 Presentation Outline About CNC Machine Tools Traditional Data Connections Digital

More information

Getting to the end game with QIF: Useable Parts. Mark Nielsen TechAzul

Getting to the end game with QIF: Useable Parts. Mark Nielsen TechAzul Getting to the end game with QIF: Useable Parts Mark Nielsen TechAzul 310-729-6275 mark@techazul.com Mark Nielsen Founder TechAzul Masters of Science in Mechanical Engineering, University of California,

More information

VisualTURN 2018 Feature Presentation

VisualTURN 2018 Feature Presentation VisualTURN 2018 Feature Presentation Introducing VisualTURN 2018 VisualTURN is a powerful 2 axis Turning Center programming system that includes Turn Roughing, Finishing, Groove Roughing, Finishing, Threading,

More information

NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015

NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015 YOUR CENTRAL SOURCE FOR DATA EXCHANGE NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015 Doug Cheney CAD Validation Specialist ITI TranscenData Doug.Cheney@TranscenData.com

More information

GEOMETRICAL TOLERANCING

GEOMETRICAL TOLERANCING GEOMETRICAL TOLERANCING Introduction In a typical engineering design and production environment, the designer of a part rarely follows the design to the shop floor, and consequently the only means of communication

More information

MODELING FOR THE END GAME > USABLE PARTS

MODELING FOR THE END GAME > USABLE PARTS MODELING FOR THE END GAME > USABLE PARTS Mark Nielsen TechAzul 310-729-6275 liveworx.com # L I V E W O R X MARK NIELSEN Founder TechAzul BS & MS Mechanical Engineering, University of California, Berkeley

More information

Stock Materials Interior Fillets... 10

Stock Materials Interior Fillets... 10 Rapid Machining Overview... 3 Capabilities... 4 Certifications & Registrations... 4 Stock Materials... 5 Design Guidelines Tolerances... 6 Wall Thickness... 7 Outside Corners... 8 Hole Depth... 9 Interior

More information

Minimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition

Minimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition Minimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition with STEP AP242 Problem Statement, Direction and Preliminary Requirements A&D PAG Position Paper (AD PAG PP01.1) December 2017

More information

Machinist NOA (2010) Subtask to Unit Comparison

Machinist NOA (2010) Subtask to Unit Comparison Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work. 1.01 Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe

More information

Charting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting. Glen Voglesong

Charting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting. Glen Voglesong Charting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting Glen Voglesong 2017 10 5 The power computer modeling: connecting tools and their functional

More information

MACHINIST TECHNICIAN - LATHE (582)

MACHINIST TECHNICIAN - LATHE (582) DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,

More information

NX CAM 9.0.3: Band Width for Drilling Sequence Optimization. Specifying hole alignment tolerance for zig and zig zag patterns. Siemens PLM Software

NX CAM 9.0.3: Band Width for Drilling Sequence Optimization. Specifying hole alignment tolerance for zig and zig zag patterns. Siemens PLM Software Siemens PLM Software NX CAM 9.0.3: Band Width for Drilling Sequence Optimization Specifying hole alignment tolerance for zig and zig zag patterns. Answers for industry. About NX CAM NX TM CAM software

More information

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard

GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration: 4 Days Training Course Content: Day 1: Tolerancing in Engineering Drawing (9:00am-10:00am) 1.0 Geometric Dimensioning

More information

Machining components using vertical boring machines

Machining components using vertical boring machines Unit 319 Machining components using vertical boring machines UAN: Level: 3 Credit value: 77 GLH: 161 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: Y/600/5430

More information

Using open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski

Using open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski Using open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski GPDIS_2012.ppt 1 CAPVIDIA Founded in 1994 (Belgium, Russia, USA, China, Japan) Development of

More information

MACHINE SHOP (420) Machine Shop (420)

MACHINE SHOP (420) Machine Shop (420) Machine Shop (420) 2019-2020 1 MACHINE SHOP (420) 420-120. Machine Tool/Fabrication. (2 Credits) This course is designed to provide fabrication students with knowledge and applications of machine tool

More information

Pro/NC. Prerequisites. Stats

Pro/NC. Prerequisites. Stats Pro/NC Pro/NC tutorials have been developed with great emphasis on the practical application of the software to solve real world problems. The self-study course starts from the very basic concepts and

More information

Machine Tool Technology/Machinist CIP Task Grid

Machine Tool Technology/Machinist CIP Task Grid 1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and

More information

AC : IMPLEMENTATION OF CAD/CAM/CNC CURRICULUM USING MASTERCAM X SOFTWARE IN TECHNICAL PROGRAMS

AC : IMPLEMENTATION OF CAD/CAM/CNC CURRICULUM USING MASTERCAM X SOFTWARE IN TECHNICAL PROGRAMS AC 2008-297: IMPLEMENTATION OF CAD/CAM/CNC CURRICULUM USING MASTERCAM X SOFTWARE IN TECHNICAL PROGRAMS Farzin Heidari, Texas A&M University, Kingsville American Society for Engineering Education, 2008

More information

PolyWorks Inspector Standard. 3 Day Course

PolyWorks Inspector Standard. 3 Day Course PolyWorks Inspector Standard INTRODUCTION TO POLYWORKS Workspace Manager Basic Options File and Project Structures PolyWorks License Manager INTRODUCTION TO POLYWORKS INSPECTOR User Interface Basic Options

More information

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018 Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational

More information

Dimensioning: There are a few simple best practices which can help us dimension a working drawing:

Dimensioning: There are a few simple best practices which can help us dimension a working drawing: Dimensioning and Tolerancing Prepared by: Michael Hypes Cornell University Preparation: One of the most common problems for new designers is choosing dimension that do not reflect the purpose of the part.

More information

DEVELOPMENT OF DIE FOR THE PRODUCTION OF PLASTIC CONTAINER

DEVELOPMENT OF DIE FOR THE PRODUCTION OF PLASTIC CONTAINER DEVELOPMENT OF DIE FOR THE PRODUCTION OF PLASTIC CONTAINER Abhishek Sawalkar 1, Ashish Yelekar 2, Yogesh Yadav 3, Aakash Bisen 4 JD College of Engineering And Management, Nagpur, India. Department of Mechanical

More information

Total Related Training Instruction (RTI) Hours: 144

Total Related Training Instruction (RTI) Hours: 144 Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Benchwork and Layout Layout tools Tapping Reaming Filing Engraving Stamping Unit 2: Cutting and Drilling Cutting Operations Drilling Operations

More information

TECHNICAL DESIGN II (546)

TECHNICAL DESIGN II (546) DESCRIPTION The second in a sequence of courses that prepares individuals with an emphasis in developing technical knowledge and skills to develop working drawings in support of mechanical and industrial

More information

Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List

Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List 1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.

More information

NX CAM 9.0.2: Gouge Reports for Tapping and Thread Milling. Gouges are no longer reported for Tapping, Hole and Boss Thread Milling.

NX CAM 9.0.2: Gouge Reports for Tapping and Thread Milling. Gouges are no longer reported for Tapping, Hole and Boss Thread Milling. Siemens PLM Software NX CAM 9.0.2: Gouge Reports for Tapping and Thread Milling Gouges are no longer reported for Tapping, Hole and Boss Thread Milling. Answers for industry. About NX CAM NX TM CAM software

More information

Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2

Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2 Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2 Asa Trainer GPDIS2017 Phoenix, AZ Sep 2017 GPDIS_2017.ppt 1 Introduction International TechneGroup Incorporated

More information

Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions

Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions 3 rd TRI-NATIONAL WORKSHOP AND MEETING OF THE NORTH AMERICAN COORDINATE METROLOGY ASSOCIATION 3D Measurement

More information

Specification D data models

Specification D data models Previous Edition Specification 2017-04 Class: Dimensions, tolerances Class No.:01 Documentation of components by means of 3D data models 516 Part name (for databases) 2009-09 3D data models 852 005 160

More information

What s New in Autodesk Inventor 2018

What s New in Autodesk Inventor 2018 What s New in Autodesk Inventor 2018 Welcome & Agenda Introduction to Inventor 2018 Professional- Grade Design Enhancements Expanded I nteroperability The I nventor Experience Autodesk Inventor 2018 I

More information

Industry and Technology Institutional (ILO), Program (PLO), and Course (SLO) Alignment Number of Courses: 36

Industry and Technology Institutional (ILO), Program (PLO), and Course (SLO) Alignment Number of Courses: 36 Program: Automation, Robotics, and Manufacturing Engineering Technology (ETEC), Manufacturing Technology (MTEC), and Machine Tool Technology (MTT) Institutional SLOs I. Content Knowledge II. Critical,

More information

Copyright

Copyright , Engineers Edge 2006-2011 Design for Milling Machining Training Written by Kelly L. Bramble Engineers Edge 2006, 2007, 2008, 2009, 2010, 2011 7.1 , Engineers Edge 2006-2011 Edited by: Kelly Bramble (Engineers

More information

Annual Report for Assessment of Outcomes Machine Manufacturing Technology (MMT) Program

Annual Report for Assessment of Outcomes Machine Manufacturing Technology (MMT) Program Annual Report for Assessment of Outcomes 2011-2012 Machine Manufacturing Technology (MMT) Program 1. Describe changes that have been implemented towards improving students attainment of outcomes that resulted

More information

Additive Manufacturing in a Model Based Enterprise

Additive Manufacturing in a Model Based Enterprise 3D Collaboration & Interoperability Congress Additive Manufacturing in a Model Based Enterprise Implementation Planning Speaker: Thad Henry Systems Engineering Management Office Information, Configuration

More information

Orbital ATK JT File Use Case Matt Johnston. 5-Oct-16

Orbital ATK JT File Use Case Matt Johnston. 5-Oct-16 Orbital ATK JT File Use Case Matt Johnston 5-Oct-16 Overview Orbital ATK at a Glance MBD or 3D Model with PMI Model Based Plan Model in NX and JT file in TcVis What we are doing well Real time use cases

More information

Design Guidelines for FDM technology

Design Guidelines for FDM technology Design Guidelines for FDM technology This guideline is supposed to be used by people who already have knowledge in 3D design, CAD/CAM, etc. and it s goal is to show the key points when designing a model

More information

CAMWorks How To Create CNC G-Code for CO2 Dragsters

CAMWorks How To Create CNC G-Code for CO2 Dragsters Objective: In this chapter we will show how to mill out the axle holes for this CO2 Dragster from the left side. VI.1. Open the previously created file: Dragster axle hole 001.sldprt. VI.2. Select the

More information

Machinist A Guide to Course Content

Machinist A Guide to Course Content Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice

More information

Leverage 3D Master. Improve Cost and Quality throughout the Product Development Process

Leverage 3D Master. Improve Cost and Quality throughout the Product Development Process Leverage 3D Master Improve Cost and Quality throughout the Product Development Process Introduction With today s ongoing global pressures, organizations need to drive innovation and be first to market

More information

Machining Center. Xi an Well-sun Electronic Technology PLC

Machining Center. Xi an Well-sun Electronic Technology PLC Machining Center Xi an Well-sun Electronic Technology PLC Operational Principles: We are market-orientated, technology-centered, and we rely on quality for survival and development. Contents About us Machining

More information

The How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity

The How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity 1 The How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity 2 The Importance of Engineering Investments What strategies will your company use to improve profitability?

More information

To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD

To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and

More information

International Journal of Science and Engineering Research (IJ0SER), Vol 3 Issue 3 March , (P) X

International Journal of Science and Engineering Research (IJ0SER), Vol 3 Issue 3 March , (P) X Design And Optimization Techniques Using In Turning Fixture M Rajmohan 1, K S Sakthivel 1, S Sanjay 1, A Santhosh 1, P Satheesh 2 1 ( UG Student ) 2 (Assistant professor)mechanical Department, Jay Shriram

More information

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

More information

Hochschule Magdeburg-Stendal BACHELORARBEIT. Bridging Engineering and Manufacturing. Bachelor of Engineering (B.Eng.) Hochschule Magdeburg-Stendal

Hochschule Magdeburg-Stendal BACHELORARBEIT. Bridging Engineering and Manufacturing. Bachelor of Engineering (B.Eng.) Hochschule Magdeburg-Stendal Hochschule Magdeburg-Stendal Fachbereich Ingenieurwissenschaften und Industriedesign (IWID) Insitut für Elektrotechnik BACHELORARBEIT Bridging Engineering and Manufacturing Vorgelegt von: Diego de la Fuente

More information

Manufacturing Technician Training

Manufacturing Technician Training Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry

More information

FOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards

FOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and ideal geometries through drawings or by means of Computer Aided Design systems, but unfortunately

More information

APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association

APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association STATE OF NEW YORK DEPARTMENT OF LABOR APPENDIX A TOOLMAKER D.O.T. CODE 601.280-042 O*NET CODE 51-4111.00 As Revised for MACNY, The Manufacturers Association This training outline is a minimum standard

More information

COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed)

COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed) COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards in the workplace. Wear,

More information

SEMMME3-056 Setting single and multi-spindle drilling machines for production

SEMMME3-056 Setting single and multi-spindle drilling machines for production Setting single and multi-spindle drilling machines for production Overview This unit identifies the competences you need to prepare and set up single and multi-spindle drilling machines and associated

More information

Engineering drawing. Semester I/II Mechanical Engineering Department Technical University of Gdańsk. Lecture 8

Engineering drawing. Semester I/II Mechanical Engineering Department Technical University of Gdańsk. Lecture 8 Engineering drawing Semester I/II Mechanical Engineering Department Technical University of Gdańsk Lecture 8 Representing Tolerance Values Tolerance is the total amount a dimension may vary and is the

More information

Geometric Dimensioning and Tolerancing

Geometric Dimensioning and Tolerancing Geometric dimensioning and tolerancing (GDT) is Geometric Dimensioning and Tolerancing o a method of defining parts based on how they function, using standard ASME/ANSI symbols; o a system of specifying

More information

Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20

Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20 Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20 Mechanical Design CATIA - Interactive Drafting Address 2D design and drawing production requirements. Product overview Interactive Drafting

More information

Available online at ScienceDirect. Procedia CIRP 43 (2016 ) th CIRP Conference on Computer Aided Tolerancing (CAT)

Available online at   ScienceDirect. Procedia CIRP 43 (2016 ) th CIRP Conference on Computer Aided Tolerancing (CAT) Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 43 (2016 ) 118 123 14th CIRP Conference on Computer Aided Tolerancing (CAT) Variational analysis for CNC milling process Armin Afkhamifar,

More information

Dimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards

Dimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME

More information

Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing

Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing Paper ID #5813 Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing Dr. Cheng Y. Lin P.E., Old Dominion University Dr. Lin is

More information

MACHINE TOOL ACCESSORIES

MACHINE TOOL ACCESSORIES DA80 COLLETS, COLLET CHUCKS AND KITS SERIES 992: Full /32" range of collapse. Concentricity within 0.0005" T.I.R. at collet nose assembled with chuck. Self release for rapid, easy operation. Interchangeable

More information

A Brief Introduction to Engineering Graphics. Will Durfee & Tim Kowalewski Department of Mechanical Engineering University of Minnesota

A Brief Introduction to Engineering Graphics. Will Durfee & Tim Kowalewski Department of Mechanical Engineering University of Minnesota A Brief Introduction to Engineering Graphics Will Durfee & Tim Kowalewski Department of Mechanical Engineering University of Minnesota Opening comments Engineering graphics is the method for documenting

More information

Cutting Strategies for Forging Die Manufacturing on CNC Milling Machines

Cutting Strategies for Forging Die Manufacturing on CNC Milling Machines Cutting Strategies for Forging Die Manufacturing on CNC Milling Machines Kore Sai Kumar M Tech (Advanced Manufacturing Systems) Department of Mechanical Engineering, Bheema Institute of Technology & Science

More information

Special Patterns - Introduction. -Manufacture of large things -Technology Provider

Special Patterns - Introduction. -Manufacture of large things -Technology Provider Special Patterns - Introduction -Manufacture of large things -Technology Provider Deny Tanuwidjaja (M.EngElectronics and Control Systems) 6 Years Robot programming 4 Years Control systems programming 5

More information

Manufacturing Cutting Strategies for Forging Die Manufacturing on CNC Milling Machines

Manufacturing Cutting Strategies for Forging Die Manufacturing on CNC Milling Machines Manufacturing Cutting Strategies for Forging Die Manufacturing on CNC Milling Machines D. Vikrama Deva Narasimha Varma Department of Mechanical Engineering, Hyderabad Institute of Technology and Management,

More information

Chapter 23. Machining Processes Used to Produce Round Shapes: Turning and Hole Making

Chapter 23. Machining Processes Used to Produce Round Shapes: Turning and Hole Making Chapter 23 Machining Processes Used to Produce Round Shapes: Turning and Hole Making R. Jerz 1 2/24/2006 Processes Turning (outside surface) straight, taper, facing, contour, form, cut-off, threading,

More information

NX Design (CAD) NX Manufacturing (CAM) Unrestricted Siemens AG 2018 Siemens PLM Software

NX Design (CAD) NX Manufacturing (CAM) Unrestricted Siemens AG 2018 Siemens PLM Software NX NX Design (CAD) NX Manufacturing (CAM) Page 1 NX Design (CAD) Course name Designing Parts in NX Mechanical Designer Ship Designer Freeform Designer Wiring Designer NX Administrator The learning tracks

More information

KOTEM was founded in 1992 as software development company specializing in metrology

KOTEM was founded in 1992 as software development company specializing in metrology Introduction Introduction KOTEM was founded in 1992 as software development company specializing in metrology Expertise in CAD, Mathematical libraries for metrology, GD&T algorithms. Our employees hold

More information

PDF - LATHE MACHINING OPERATIONS DOWNLOAD

PDF - LATHE MACHINING OPERATIONS DOWNLOAD 02 March, 2018 PDF - LATHE MACHINING OPERATIONS DOWNLOAD Document Filetype: PDF 524.74 KB 0 PDF - LATHE MACHINING OPERATIONS DOWNLOAD For metal lathe, mini lathe, milling other general machining operations.

More information

Computer Numerical Control (CNC) Hacettepe University Chemical Engineering Department

Computer Numerical Control (CNC) Hacettepe University Chemical Engineering Department Computer Numerical Control (CNC) Banu Akar Duygu Gökçe Neşe Kaynak Meltem Erdi Hacettepe University Chemical Engineering Department 22.12.2010 CONTENT 1. What are NC & CNC? 2. History 3. CNC system Elements

More information

MiCAT Planner Features

MiCAT Planner Features MiCAT Planner Features MiCAT Planner is Mitutoyo s latest software development for fast and efficient part programming. Mitutoyo MiCAT Planner was developed to make the generation of measurement programs

More information

COURSE CONTENTS FOR THE AVTS COURSES

COURSE CONTENTS FOR THE AVTS COURSES Revision: 00 LEARNING CONTENT Page 1 of 14 COURSE CONTENTS FOR THE AVTS COURSES AT CAD- CAM LAB, ATI, VIDYANAGAR, HYDERABAD Revision: 00 LEARNING CONTENT Page 2 of 14 III COURSE CODE CAD-01 IV COURSE TITLE

More information

The best of productivity with CNC flexibility

The best of productivity with CNC flexibility The best of productivity with CNC flexibility Productive. Accurate. Mikron Multistar NX-24 1 Mikron Multistar NX-24 For an unbeatable cost per part Do you need to machine complex and highly precise parts

More information

Rod Support Systems Cost Comparison

Rod Support Systems Cost Comparison Rod Support Systems Cost Comparison Ref. Time Estimation Booklet 2.810 Nov 2, 2016, T. Gutowski 1 Example Problem Job Shop to large scale production 2 Picking Manufacturing Systems Job Shops very flexible,

More information

Cnc Grinder Jig Grinding Manual READ ONLINE

Cnc Grinder Jig Grinding Manual READ ONLINE Cnc Grinder Jig Grinding Manual READ ONLINE If searched for the ebook Cnc grinder jig grinding manual in pdf format, in that case you come on to right website. We presented complete edition of this book

More information

The Evolving Role of MBD

The Evolving Role of MBD The Evolving Role of MBD at Northrop Grumman Nathan Holyoak, Northrop Grumman Nathan.Holyoak@ngc.com GPDIS_2018.ppt 1 Propulsion System - Promontory, Utah Defense Electronic Systems - Fort Worth, Texas

More information

A New Approach to Teaching Manufacturing Processes Laboratories

A New Approach to Teaching Manufacturing Processes Laboratories A New Approach to Teaching Manufacturing Processes Laboratories John Farris, Jeff Ray Grand Valley State University Abstract The manufacturing processes laboratory taught in the Padnos School of Engineering

More information