c) Save the document as taller3p1_tunombre
|
|
- Lester Farmer
- 6 years ago
- Views:
Transcription
1 WORKSHOP# 3 DRAW WITH INKSCAPE Preparing the page 1. Enter Inkscape and from the File menu, go to Document Properties. 2. Prepare a page with the following characteristics: a) Format A4 (millimeters as the unit of measure) b) Color background white-vertical position c) Save the document as taller3p1_tunombre OBJETS DEGRADED- PRACTICE 1 1. Draw a blue square of 50 mm without a border. 2. Draw four circles 10, 20, 30 and 40 mm. of diameter respectively. Color them as in the Figure (approximately). 1
2 3. Draw a 6-pointed star and a long black line 2 mm thick and 200 mm long (to make it perfectly horizontal use the Ctrl key) 4. Move, rotate, position and align elements so that you have them as in the figure below 2
3 5. Now let's apply gradients (degradados) to the objects. You must do one at a time. 6. Choose one of them, and with the create and edit gradients tool selected, draw a vertical gradient on the desired object. Example: Select Edit gradient stops at the top on the menu The following table shows: Shows the drop Choose the second stop Now move all values to 255 for which the gradient goes from some color to white but completely opaque. 3
4 7. Do the same with other objects until you get a figure like this.: 8. Group the figure, duplicate and reduce it to 50% (Object/Transform - Scale) 4
5 9. Center the two figures in the middle of the page. 5
6 DESING A STAMP-PRACTICE 2 Prepare the page 1. Enter Inkscape and from the File menu, go to Document Properties. 2. Prepare a page with the following characteristics: a) Format A4 (millimeters as the unit of measure). b) Background-white vertical position. c) Save the document as taller3p2_tunombre Design - Trace with Inkscape as shown in the Figure. - The bear's body is made with the Bezier tool, others are geometric figures such as circles, ellipses, squares and triangles. - At the end of the practice you can see how the drawing should be, then you should change line thickness. - Also change the level of each object (using up or down a level). 6
7 - Finally to color as in the figure, open the file "colores_oso.svg". Copy and paste it next to your drawing. - Use the "Select color image" tool to copy the same tones. First, select the object you want to color and then click on the desired color you want to copy. Automatically the color changes. Make the next practice on the same document. DESIGN AN ANIMAL CARTOON-PRACTICE 3 Let's draw a frog using Bezier curves and circles. 1. Open a new file in Inkscape. 2. In the tool control bar (left) select Create circles, ellipses and arcs. Draw an ellipse as in the figure and color it with a dark purple tone from the color palette. Color the edge of the ellipse (line) black and establish a line width of 2 pixels in the Fill and Stroke menu Object tool. 3. In the control tool bar, select Draw Bezier curves and straight lines to draw the legs of the frog. Draw a line similar to that we offer. To do this, click on each change of direction that has a curve. Each click generates a 7
8 point on the line; if before releasing the left button (each click) you move the mouse, the line will curve; this allows you to create the curved line. To close the path, click on the first point. 4. To refine and soften the line, edit the points of the line. Double click on the picture to display the points and click on them to drag. To bend the line, click on points with the Shift key. Fill the line with purple when finished. 5. Repeat to draw the other leg. 6. To make the eyes, draw a large white circle with a small black circle inside. Copy it to draw the second. Add two curves as eyebrows. 7. Now join the drawings to shape the frog. If any part is too big or too small, scale the size of the frog to to keep it proportionate. To place objects on top of each other, select them in the Object menu, choose Raise or Lower as interest. 8. Now, draw the mouth with a curved line inside the ellipse and, finally, create a small purple ellipse, copy, and then paste it several times. Change the size and distribute the ellipses throughout the body of the frog. 9. Save it as workshop3p3_tunombre 8
SolidWorks Design & Technology
SolidWorks Design & Technology Training Course at PHSG Ex 5. Lego man Working with part files 8mm At first glance the Lego man looks complicated but I hope you will see that if you approach a project one
More informationCreate a Happy Sun Character. Below is the final illustration we will be working towards.
Create a Happy Sun Character Below is the final illustration we will be working towards. 1 Step 1 Create a new document and with the Ellipse tool (L), create an ellipse. 2 Step 2 Fill the ellipse with
More informationDrawing the Red Christmas Bell
Vector 3D Christmas Bells Thinking of drawing some Christmas bells for this Christmas? Read this illustrator tutorial to learn how to draw 5 different styles of vector Christmas bells using the 3D Revolve
More informationJ. La Favre Fusion 360 Lesson 5 April 24, 2017
In this lesson, you will create a funnel like the one in the illustration to the left. The main purpose of this lesson is to introduce you to the use of the Revolve tool. The Revolve tool is similar to
More informationADOBE ILLUSTRATOR. Step 1. Dificultad: Intermedio Tiempo: 30 minutos 1 hora. Create a new document and with the Ellipse tool (L), create an ellipse.
Dificultad: Intermedio Tiempo: 30 minutos 1 hora Step 1 Create a new document and with the Ellipse tool (L), create an ellipse. Lic. José Luis Solórzano Vera Página 1 Step 2 Fill the ellipse with a radial
More informationJ. La Favre Fusion 360 Lesson 4 April 21, 2017
In this lesson, you will create an I-beam like the one in the image to the left. As you become more experienced in using CAD software, you will learn that there is usually more than one way to make a 3-D
More informationCreate A Briefcase Icon
Create A Briefcase Icon In this tutorial, I will show you how to create a briefcase icon with rectangles, ellipses, and gradients. This briefcase icon is great for web designs and user interfaces. Moreover,
More informationCreating Digital Illustrations for Your Research Workshop IV Illustration Demo Part II
Creating Digital Illustrations for Your Research Workshop IV Illustration Demo Part II Final Figure Workshop IV Components Topics & Techniques covered How to randomly transform a group of individual shapes.
More informationBuild the clerestory of Chartres Cathedral
Build the clerestory of Chartres Cathedral Overview: Step 1. Create a new Design Layer Step 2. Build the wall Step 3. Build the lancets Step 4. Build the rose window Step 5. Build the rose window quatrefoils
More informationBy Washan Najat Nawi
By Washan Najat Nawi how to get started how to use the interface how to modify images with basic editing skills Adobe Photoshop: is a popular image-editing software. Two general usage of Photoshop Creating
More informationConverting a 3D object into a mould. With Tinkercad and Inkscape
Converting a 3D object into a mould With Tinkercad and Inkscape What you need Tinkercad Inkscape a STL file to convert Create an account now Download for free now Pick up one for free now To make better
More informationHow to Apply a Halftone Effect as a Photo Background Using CorelDRAW
How to Apply a Halftone Effect as a Photo Background Using CorelDRAW by Silvio Gomes CorelDRAW offers great tools for applying interesting effects that can really highlight the look of your art work. One
More informationDrawing with precision
Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial
More informationWelcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators.
Workspace tour Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators. This tutorial will help you become familiar with the terminology and
More informationCustomized Foam for Tools
Table of contents Make sure that you have the latest version before using this document. o o o o o o o Overview of services offered and steps to follow (p.3) 1. Service : Cutting of foam for tools 2. Service
More informationCreate a Twitter Style Bird Mascot - Vectortuts+
Create a Twitter Style Bird Mascot Aug 4th in Illustration by Rype Using some basic shapes, effects, and gradients I will show you how to create a Twitter mascot for your blog or website. Twitter is a
More informationIllustrator Tutorial - Create a Gang of Vector Ninjas
Blog.SpoonGraphics - Design Tutorials and Free Vector Downloads Illustrator Tutorial - Create a Gang of Vector Ninjas Free Vector Illustrations Download Amazing Illustrations. Join istockphoto For Free
More informationStep 1. Blue Bird Tutorial
Blue Bird Tutorial Using some basic shapes, effects, and gradients I will show you how to create a Twitter mascot for your blog or website. Twitter is a popular free web service for social networking and
More informationCreate a Cute Furry Vector Monster in Illustrator
Create a Cute Furry Vector Monster in Illustrator Other labs from this author can be found at http://www.blog.spoongraphics.co.uk/tutorials/create-a-cute-furry-vector-monster-inillustrator Follow these
More informationPhotoshop 1. click Create.
Photoshop 1 Step 1: Create a new file Open Adobe Photoshop. Create a new file: File->New On the right side, create a new file of size 600x600 pixels at a resolution of 300 pixels per inch. Name the file
More informationILLUSTRATOR BASICS FOR SCULPTURE STUDENTS. Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc.
ILLUSTRATOR BASICS FOR SCULPTURE STUDENTS Vector Drawing for Planning, Patterns, CNC Milling, Laser Cutting, etc. WELCOME TO THE ILLUSTRATOR TUTORIAL FOR SCULPTURE DUMMIES! This tutorial sets you up for
More informationMEASUREMENT CAMERA USER GUIDE
How to use your Aven camera s imaging and measurement tools Part 1 of this guide identifies software icons for on-screen functions, camera settings and measurement tools. Part 2 provides step-by-step operating
More informationHow To Create a Stylish Skull Based Vector Illustration
How To Create a Stylish Skull Based Vector Illustration The skull and crossed pistons mark is a popular adaption of the tradition skull and crossbones symbol and is commonly seen in motorcycle culture,
More informationDigital Photography 1
Digital Photography 1 Photoshop Lesson 3 Resizing and transforming images Name Date Create a new image 1. Choose File > New. 2. In the New dialog box, type a name for the image. 3. Choose document size
More informationInventor Activity 5: Lofted Vase
Inventor Activity 5: Lofted Vase In this tutorial, you will use a few new commands to create a free form Lofted object. Sometimes you want to create an object that is not made up of square, flat, or perfectly
More informationExploring Photoshop Tutorial
Exploring Photoshop Tutorial Objective: In this tutorial we will create a poster composed of three distinct elements: a Bokeh, an image and title text. The Bokeh is an effect which is sometimes seen in
More informationHow to Create Website Banners
How to Create Website Banners In the following instructions you will be creating banners in Adobe Photoshop Elements 6.0, using different images and fonts. The instructions will consist of finding images,
More informationLine Art Directions. Link to line art coloring pages. Ctrl + Click to access the link. Coloring pages - Coloring Book
Line Art Directions Link to line art coloring pages Ctrl + Click to access the link Coloring pages - Coloring Book www.coloring-book.info/coloring/ More than 5.000 printable coloring sheets. Free coloring
More informationFunctions added in CLIP STUDIO PAINT Ver are marked with an *.
Preface > Changes in Ver.1.7.1 Preface Changes in Ver.1.7.1 The functions added/changed in CLIP STUDIO PAINT Ver.1.7.1 are as follows. Functions added in CLIP STUDIO PAINT Ver.1.7.1 are marked with an
More informationCONTENT INTRODUCTION BASIC CONCEPTS Creating an element of a black-and white line drawing DRAWING STROKES...
USER MANUAL CONTENT INTRODUCTION... 3 1 BASIC CONCEPTS... 3 2 QUICK START... 7 2.1 Creating an element of a black-and white line drawing... 7 3 DRAWING STROKES... 15 3.1 Creating a group of strokes...
More informationChanges Common to CLIP STUDIO PAINT PRO and EX
Preface > Changes in Ver.1.3.1 Preface Changes in Ver.1.3.1 Additions and/or changes in CLIP STUDIO PAINT between Ver.1.2.8 and Ver.1.3.1 are as follows. Functions added in CLIP STUDIO PAINT Ver.1.3.1
More informationTutorial Building the Nave Arcade
Tutorial: Digital Gothic AH C117B (Winter 2017) Tutorial Building the Nave Arcade Overview: Step 1: Determining and Drawing The Arch (Quinto Arch) Step 2: Extrude Molding Profile Step 3: Adding Walls Step
More informationExtreme Makeovers: Photoshop Retouching Techniques
Extreme Makeovers: Table of Contents About the Workshop... 1 Workshop Objectives... 1 Getting Started... 1 Photoshop Workspace... 1 Retouching Tools... 2 General Steps... 2 Resolution and image size...
More informationUsing Google SketchUp
Using Google SketchUp Opening sketchup 1. From the program menu click on the SketchUp 8 folder and select 3. From the Template Selection select Architectural Design Millimeters. 2. The Welcome to SketchUp
More informationGeometer s Sketchpad Version 4
Geometer s Sketchpad Version 4 For PC Name: Date: INVESTIGATION: The Pythagorean Theorem Directions: Use the steps below to lead you through the investigation. After each step, be sure to click in the
More information1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry
2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply
More informationHOW TO CREATE A SUPER SHINY PENCIL ICON
HOW TO CREATE A SUPER SHINY PENCIL ICON Tutorial from http://psd.tutsplus.com/ Compiled by INTRODUCTION The Pencil is one of the visual metaphors most used to express creativity. In this tutorial,
More information4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp
Intersection 2D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b)
More informationExercise01: Circle Grid Obj. 2 Learn duplication and constrain Obj. 4 Learn Basics of Layers
01: Make new document Details: 8 x 8 02: Set Guides & Grid Preferences Details: Grid style=lines, line=.5, sub=1 03: Draw first diagonal line Details: Start with the longest line 1st. 04: Duplicate first
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More informationAdobe Photoshop The program: The Menus: Computer Graphics I- Final Review
Computer Graphics I- Final Review The written portion of your final exam will be 25 multiple choice questions and one free response. Some parts of the exam will be related to examples, images and pictures.
More informationMYGRAPHICSLAB: ADOBE ILLUSTRATOR CS6
DRAW MYGRAPHICSLAB: ADOBE ILLUSTRATOR CS6 IN THIS LESSON, YOU WILL LEARN TO: Set Pen tool stroke and fill Draw line segments with the Pen tool Draw curves with the Pen tool Create open and closed paths
More informationDrawing 1: Tools and Techniques in Corel Draw
Drawing 1: Tools and Techniques in Corel Draw Introduction: what this assignment is about Drawing is an essential skill for Earth Science graduates, who typically produce maps, cross-sections and other
More informationDigital Arts I - Course Outline
Points Course Possible Hours Course Overview 4 Lesson 1: Start the Course Identify computer requirements. Learn how to move through the course. Switch between windows. Lesson 2: Set Up Your Computer Find
More informationChapter 4: Draw with the Pencil and Brush
Page 1 of 15 Chapter 4: Draw with the Pencil and Brush Tools In Illustrator, you create and edit drawings by defining anchor points and the paths between them. Before you start drawing lines and curves,
More informationLearning Photo Retouching techniques the simple way
Learning Photo Retouching techniques the simple way Table of Contents About the Workshop... i Workshop Objectives... i Getting Started... 1 Photoshop Workspace... 1 Setting up the Preferences... 2 Retouching
More informationCreate a new image: 10 IN height and 16 IN width, 300 dpi.
The images needed for this project are on my website. Create a new image: 10 IN height and 16 IN width, 300 dpi. Create a new layer and fill the layer with white.. Create a radial gradient by using following
More informationAdobe Photoshop CC 2018 Tutorial
Adobe Photoshop CC 2018 Tutorial GETTING STARTED Adobe Photoshop CC 2018 is a popular image editing software that provides a work environment consistent with Adobe Illustrator, Adobe InDesign, Adobe Photoshop,
More informationAdobe Photoshop CS5 Tutorial
Adobe Photoshop CS5 Tutorial GETTING STARTED Adobe Photoshop CS5 is a popular image editing software that provides a work environment consistent with Adobe Illustrator, Adobe InDesign, Adobe Photoshop
More informationWeb Graphics Chapter 7 Review
Web Graphics Chapter 7 Review Name Date 1. The Add Layer Mask button is located on/in the. a. Toolbox b. Layers palette c. Mask palette d. History palette 2. How many color adjustments commands are available
More informationIntroduction. The basics
Introduction Lines has a powerful level editor that can be used to make new levels for the game. You can then share those levels on the Workshop for others to play. What will you create? To open the level
More informationChapter 9 Organization Charts, Flow Diagrams, and More
Draw Guide Chapter 9 Organization Charts, Flow Diagrams, and More This PDF is designed to be read onscreen, two pages at a time. If you want to print a copy, your PDF viewer should have an option for printing
More informationAdobe PhotoShop Elements
Adobe PhotoShop Elements North Lake College DCCCD 2006 1 When you open Adobe PhotoShop Elements, you will see this welcome screen. You can open any of the specialized areas. We will talk about 4 of them:
More informationPhotoshop CS2. Step by Step Instructions Using Layers. Adobe. About Layers:
About Layers: Layers allow you to work on one element of an image without disturbing the others. Think of layers as sheets of acetate stacked one on top of the other. You can see through transparent areas
More informationPhotoshop CC Editing Images
Photoshop CC Editing Images Rotate a Canvas A canvas can be rotated 90 degrees Clockwise, 90 degrees Counter Clockwise, or rotated 180 degrees. Navigate to the Image Menu, select Image Rotation and then
More informationGIMP (GNU Image Manipulation Program) MANUAL
Selection Tools Icon Tool Name Function Select Rectangle Select Ellipse Select Hand-drawn area (lasso tool) Select Contiguous Region (magic wand) Selects a rectangular area, drawn from upper left (or lower
More informationHow to Draw a New York Beauty Block
How to Draw a New York Beauty Block We start by opening the Block Wizard. Click Options, Screen settings. In the Grid tab, choose Circular for the Grid Type. Set the Size to be.50 Number of Rings: 15 Radials:
More informationCompositing. Compositing is the art of combining two or more distinct elements to create a sense of seamlessness or a feeling of belonging.
Compositing Compositing is the art of combining two or more distinct elements to create a sense of seamlessness or a feeling of belonging. Selection Tools In the simplest terms, selections help us to cut
More informationPanoramas and the Info Palette By: Martin Kesselman 5/25/09
Panoramas and the Info Palette By: Martin Kesselman 5/25/09 Any time you have a color you would like to copy exactly, use the info palette. When cropping to achieve a particular size, it is useful to use
More informationDigital Photography 1
Digital Photography 1 Photoshop Lesson 1 Photoshop Workspace & Layers Name Date Default Photoshop workspace A. Document window B. Dock of panels collapsed to icons C. Panel title bar D. Menu bar E. Options
More informationOrnamental Pro 2010 Component Drawing Manual
Ornamental Pro 2010 Component Drawing Manual Introduction This manual explains the methods for creating your own components for the component library. Component mode is for advanced users only. You must
More informationUNIT 11: Revolved and Extruded Shapes
UNIT 11: Revolved and Extruded Shapes In addition to basic geometric shapes and importing of three-dimensional STL files, SOLIDCast allows you to create three-dimensional shapes that are formed by revolving
More informationAnimated Snowman. Image size: 11 w x 17 h 300 dpi
Animated Snowman Image size: 11 w x 17 h 300 dpi Step 1 First of all, you ll need the texture on my website. Now open a new document. I usually work on really big documents because I can work on the details
More informationIntroduction to CATIA V5
Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower
More informationRelease Highlights for BluePrint-PCB Product Version 2.0.1
Release Highlights for BluePrint-PCB Product Version 2.0.1 Introduction BluePrint Version 2.0.1 is a rolling release for BluePrint V2.0. BluePrint rolling releases are delivered as needed and allow us
More informationLearning Adobe Illustrator CS5
Module 1 Contents Chapter 1: Introduction to Adobe Illustrator The Adobe Illustrator Screen...1-1 The Tools Panel...1-3 Drawing Lines...1-3 Tearing off a Panel... 1-3 Drawing Different Line Types... 1-4
More informationThis is a great place to play and explore your creativity! It isn't piecing but it is exciting to see what comes out of playing with the tools.
This week we are going to look at PatchDraw. This is a group of tools that allow you to create some applique or stencil designs. They could be used to trace off for quilting designs or you can applique
More informationAppliqué with CutWork
Appliqué with CutWork Method 1: Creating Appliqué from a Placement Line Open BERNINA Embroidery Software. Click on File> Open. Select the Appliqué Flowers, provided with the lesson. Click on Open. Select
More informationColor and More. Color basics
Color and More In this lesson, you'll evaluate an image in terms of its overall tonal range (lightness, darkness, and contrast), its overall balance of color, and its overall appearance for areas that
More informationAdobe Illustrator. Mountain Sunset
Adobe Illustrator Mountain Sunset Adobe Illustrator Mountain Sunset Introduction Today we re going to be doing a very simple yet very appealing mountain sunset tutorial. You can see the finished product
More informationAdobe Photoshop Workshop
Adobe Photoshop Workshop DTM dacreativegenius.com/photoshop 404.695.5769 dan@dacreativegenius.com Photoshop s primary strength is as a pixel-based image editor, unlike vector-based image editors. Photoshop
More informationArchitecture 2012 Fundamentals
Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit
More informationg. Click once on the left vertical line of the rectangle.
This drawing will require you to a model of a truck as a Solidworks Part. Please be sure to read the directions carefully before constructing the truck in Solidworks. Before submitting you will be required
More informationDigital Design and Communication Teaching (DiDACT) University of Sheffield Department of Landscape. Adobe Photoshop CS5 INTRODUCTION WORKSHOPS
Adobe INTRODUCTION WORKSHOPS WORKSHOP 1 - what is Photoshop + what does it do? Outcomes: What is Photoshop? Opening, importing and creating images. Basic knowledge of Photoshop tools. Examples of work.
More informationIntro to One Point Perspective
Intro to One Point Perspective Horizon Line - The horizon line in perspective drawing is a horizontal line across the picture. It is always at eye level - its placement determines where we seem to be looking
More informationTV Aquarium. Create a new document. 8.5 x 11, 300 dpi. Save as TV Aquarium Your Name. Create TV shape. Use Pen
Create a new document. 8.5 x 11, 300 dpi. Save as TV Aquarium Your Name. Create TV shape. Use Pen Tool, Convert Point Tool and Direct Selection Tool. We need side shapes to create patches of light and
More informationMYGRAPHICSLAB: ADOBE ILLUSTRATOR CS6
REFINE STROKES MYGRAPHICSLAB: ADOBE ILLUSTRATOR CS6 IN THIS LESSON, YOU WILL LEARN THAT: Defining the features of generated strokes is an important skill for creating illustrations Strokes can have: Different
More informationHow to Resize or Crop Digital Images Using Photoshop Elements For Your SchoolWeb Site
How to Resize or Crop Digital Images Using Photoshop Elements For Your SchoolWeb Site Monica Mais 416 338-4260 monica.mais@tdsb.on.ca Sal Lopiccolo 416 397-3530 sal.lopiccolo@tdsb.on.ca How Pixels and
More informationUsing Adobe Photoshop
Using Adobe Photoshop 4 Colour is important in most art forms. For example, a painter needs to know how to select and mix colours to produce the right tones in a picture. A Photographer needs to understand
More informationHumanoid. By: Adeel Naseer
Humanoid In this tutorial we will manipulate a women s portrait in into a human robot. Main tool used to get the robotic body figure is, Pen tool. We will stroke the path by using various brush sizes.
More informationPart 1- Fundamental Functions
Part 1- Fundamental Functions Note: Alt+Tab will allow you to move between programs in the docker. Shift+Tab removes right pallets Tab removes all pallets Ctrl+1= centers art board Ctrl + 0= fill window
More informationAddendum 18: The Bezier Tool in Art and Stitch
Addendum 18: The Bezier Tool in Art and Stitch About the Author, David Smith I m a Computer Science Major in a university in Seattle. I enjoy exploring the lovely Seattle area and taking in the wonderful
More information3. Create a rectangle that is 10mm W by 4mm H and place it in the middle of the big rectangle on the edge like this:
Wooden Box Project Make 1 & Make 2: Due Friday 2/1 You are going to make a wooden box. Each person will make a box with different dimensions. First we will cut the boxes out of cardboard and when we know
More informationOverview of Photoshop Elements workspace
Overview of Photoshop Elements workspace When you open Photoshop Elements, the Welcome screen offers you two options (Figure 1): The Organize button opens the Organizer. In the Organizer you organize and
More informationKey Terms. Where is it Located Start > All Programs > Adobe Design Premium CS5> Adobe Photoshop CS5. Description
Adobe Adobe Creative Suite (CS) is collection of video editing, graphic design, and web developing applications made by Adobe Systems. It includes Photoshop, InDesign, and Acrobat among other programs.
More informationQuilt Pro 6 Lesson Quilt in a Quilt
Quilt Pro 6 Lesson Quilt in a Quilt Quilt in a Quilt The Inner Quilt This quilt is a very complex design. We will cover a unique technique not covered in the manual. While any one can master the techniques
More informationCreate A Mug. Skills Learned. Settings Sketching 3-D Features. Revolve Offset Plane Sweep Fillet Decal* Offset Arc
Create A Mug Skills Learned Settings Sketching 3-D Features Slice Line Tool Offset Arc Revolve Offset Plane Sweep Fillet Decal* Tutorial: Creating A Custom Mug There are somethings in this world that have
More informationA Classic Icon. Overview: Finding different ways to construct the same iconic image.
A Classic Icon Five Ways to Re-create Simple Shapes Overview: Finding different ways to construct the same iconic image. You can construct even the simplest of iconic images in many ways. Patricia McShane
More informationPreparing your artwork for clear Zipper Pulls using Illustrator
Preparing your artwork for clear Zipper Pulls using Illustrator This tutorial contains everything you need to know about creating your own, printed clear acrylic zipper pulls. Including how to format your
More informationUndress a Giraffe in Photoshop
Undress a Giraffe in Photoshop By: Alexandra Fomicheva Have you ever wanted to know what a Giraffe looks like without its spots? If so, this tutorial is for you, you pervert! Today, we will demonstrate
More informationGetting Started. with Easy Blue Print
Getting Started with Easy Blue Print User Interface Overview Easy Blue Print is a simple drawing program that will allow you to create professional-looking 2D floor plan drawings. This guide covers the
More informationSelective Edits in Camera Raw
Complete Digital Photography Seventh Edition Selective Edits in Camera Raw by Ben Long If you ve read Chapter 18: Masking, you ve already seen how Camera Raw lets you edit your raw files. What we haven
More informationThis project covers the following design concepts:
Design Project 5 This project covers the following design concepts: DRAWING TOOLS REGIONS SURFACES ADJUSTING DEPTH & HEIGHT CONSTRAINTS & ATTACHMENTS CARVING LIST MERGE MANAGING DATA UPLOADING TO MEMORY
More informationFilters. Learning Objectives. Introduction
6 Painting Tools and Filters Learning Objectives After completing this chapter, you will be able to: Apply paint to an image using the Brush Tool. Select and modify brush styles using the Brush Preset
More informationMovie Merchandising. Movie Poster. Open the Poster Background.psd file. Open the Cloud.jpg file.
Movie Poster Open the Poster Background.psd file. Open the Cloud.jpg file. Movie Merchandising Choose Image>Adjustments>Desaturate to make it a grayscale image. Select the Move tool in the Toolbar and
More informationMs. Cavo Graphic Art & Design Illustrator CS3 Notes
Ms. Cavo Graphic Art & Design Illustrator CS3 Notes 1. Selection tool - Lets you select objects and groups by clicking or dragging over them. You can also select groups within groups and objects within
More informationCreate a Stylized GPS Icon
Home About Resources Contact Shop Tutorials Tips and Tricks Interviews Inspiration Create a Stylized GPS Icon Tutorials July 9th, 2009 Location based software and peripherals are very popular these days.
More informationCETOL 6σ Tutorial. For Pro/Engineer and Creo Parametric. The table. CETOL 6σ / ProE. Page 1
CETOL 6σ Tutorial For Pro/Engineer and Creo Parametric The table Page 1 The Table Description: This tutorial will show you the basic functionality of CETOL 6 Sigma. An analysis normally starts with a definition
More informationIntroduction to Layers
Introduction to Layers By Anna Castano A layer is an image or text that is piled on top of another. There are many things you can do with layer and it is easy to understand how it works. Through the introduction
More information