Content Area: Career Education Department: Technology Course: Advanced Engineering and Architectural Drawing

Size: px
Start display at page:

Download "Content Area: Career Education Department: Technology Course: Advanced Engineering and Architectural Drawing"

Transcription

1 SHORE REGIONAL HIGH SCHOOL DISTRICT West Long Branch, New Jersey Content Area: Career Education Department: Technology Course: Mr. Leonard Schnappauf, Superintendent/Principal Dr. Robert McGarry, Director of Curriculum and Instruction BOARD OF EDUCATION Anthony F. Moro, Jr., President Tadeusz Ted Szczurek, Vice President Nancy DeScenza David Baker Elizabeth Garrigal Diane Merla Russell T. Olivadotti Ronald O Neill Frank J. Pingitore Paul Rolleri Date of Last Revision/Board Adoption: 9/24/2009

2 Career Education Technology AKNOWLEDGMENTS Monroe Township Schools 2

3 Educational Goals 1. Explore career opportunities and identify resources for future study. 2. Develop alternative design solution for problem solving. 3. Apply organizational skills and present information in a clear, concise and appropriate manner. 4. Utilize communication technology to visualize and present a design idea. Introduce students to the world of drafting in industry through project-based learning. 5. Review the importance of AutoCAD in industry. 6. Identify the basic AutoCad commands needed for two dimensional construction. 7. Use tool bar commands for layering, dimensioning, isometrics, and templates. 8. Prepare working and assembly drawings. 9. Use the elements of design to develop new products. 3

4 A note about Technology Literacy Standards and. Technology integration is the seamless and effective use of 21st century technology within an instructional setting to support students and teachers in the learning process with administrative support and evaluation. Curriculum integration: infuses 21st Century technology across all curriculum areas in a relevant learner-centered environment that engages students and increases achievement; effectively implements technology that requires teachers to develop teaching strategies that lead to academic success for each student; supports higher-order thinking skills such as information-gathering, information-organizing, evaluating, problem solving and decision making, while working as a team member and developing communication skills; and Requires support of all stakeholders within the community.. A complete copy of the new Standards for Mathematics may also be found at: 4

5 Scope and Sequence I. Drafting in Industry a. Products b. Drafting Review III. AutoCAD a. AutoCAD in Industry b. AutoCAD Review c. Command Line d. Drawing Setup Quarter I II. Quarter II The Product Design a. What makes a good food design? b. New design c. Brainstorming d. Views e. Isometrics f. Power Point IV. Fundamentals of 2D construction a. Basic AutoCAD Commands b. layers c. Dimensioning V. Isometrics a. Understanding Isometrics in AutoCAD b. Set-up template VI. Working Drawings in AutoCAD a. What is an assembly drawing? b. Assembly Drawings vs. Working Drawings c. Information required in drawings Quarter III VII. The Product Design a. Design Techniques b. Product Design c. Brainstorming Quarter IV VIII. Applying AutoCAD to the Product Design layout a. Drawing Set-ups b. Assembly Drawing c. Working Drawings 5

6 1.1. to discuss various product designs to determine the strength and weaknesses of each design a product for their given company review the basic drafting skills to include but not be limited to design layout, borders, sketching. Goal 1: Drafting in Industry Introduce students to the world of drafting in industry through project-based learning. What makes a product a good product? What are the layout measurements that are used in drafting? Computers, internet, paper, handouts on different types of food products, Class discussions to include product designs and their strengths and weaknesses. Teacher observation Project Based Learning Activity: solving a problem where sales are down in a given company. s Standards: B.1. thru B.3. (these standards are also cross-content standards for Science 5.2 & 5.4) 6

7 2.1. brainstorm new ideas to do for food product design sketch new idea. Must include all 6 views and everything must be shown on each view draw using correct placement on paper with all six views of object showing all sides finished draw an isometric of product using the correct centering method build a colored model of product deliver a sales pitch to the class and selected members of the staff. Standards: B.5, B.9, B.11, B B.1. thru B.3. (these standards are also cross-content standards for Science 5.2 & 5.4) Goal 2: Product Design The student will be able to design a new food product for a given company in order to increase sales. What are the needs, who are your consumer, what type of new food products could you design? What is the correct placement of the 6 views? What is the proper way to center an isometric drawing? What information needs to be included in the power point presentation? All drafting tools, paper, pencils Colored pencils, x-acto knifes, scissors, paper, boxes, drawings Computers, television, power point, drawings. Internet research on assigned company Teacher observation Labs Teacher discussions Project Based Learning Activity: solving a problem where sales are down in a given company that is assigned by the teacher. Project: Sales are down; design a new product to increase sales. What is the best way to go about designing the new product? Power Point Presentation on Project 7

8 Goal 3: AutoCAD in Industry The student will review the importance of AutoCAD in industry discuss the advantages and disadvantages of AutoCAD and why it is the leading drafting program used in industry. Why has AutoCAD become the leading software program in Educational and Industry? Handouts to include various areas where AutoCAD is used. Class discussion on how AutoCAD has changed the drafting world. Computers and Internet to look up different companies and educational Institutes that use AutoCAD as their primary source of drafting. Standards: A.1. thru A.9. 8

9 4.1. set up drawing templates by adjusting the units set up drawing templates by adjusting the limits set up drawing templates by adjusting the snap set up drawing templates by adjusting the grid draw assigned drawings using the polar method. Goal 4: AutoCAD The student will review the basic AutoCad commands learned in Drafting. How do you determine the limits of a drawing? What units should the drawings be in? Can you use any number for your snap and grid? When using the polar method can you use the icons, or do you have to type the command in the command line? Computers AutoCAD Handouts on setting up the template Class discussion on saving the template to the server. Lab Power Point TV for hook up of computer Standards: A.1. thru A.9. 9

10 5.1. to draw various size circles by using the command line or the icons draw a line and offset it a given distance to a certain side trim a line using the trim command use the osnap settings with an icon or typing in design settings in the command line demonstrate the use of the extend command demonstrate the use of the polar and rectangular array commands demonstrate the use of the copy command. Fundamentals of 2 Dimensional Construction Goal 5: The student will demonstrate an understanding of the basic commands needed for 2-Dimensional Construction. When is it necessary to use the r (radius) and d (diameter) commands? What does it mean to offset? Compare offset to copying. Why would you need the trim command? Draw a circle with a line through it and trim off part of the line. If you were to erase the line would you get the same results? What is Osnap, why do we need it? When should the extend command be used? Draw tow line, one perpendicular, and one horizontal but that are not touching, and then extend the horizontal one to the vertical one. What is the difference between the polar array and the rectangular array? Is the copy command the same as offset command? Computers AutoCAD Class discussions on what 2-D construction means. Teacher demonstration using TV monitor on how to do the commands for objectives Drawings that require students to use the commands being taught. Standards A.1. thru A.9. 10

11 6.1. draw a three point arc draw an object and rotate it manually or by typing in degrees draw an object and create a mirrored image while saving the original fillet the edges of two lines to make it rounded chamfer the edges of two lines. Advanced 2 Dimensional Construction in AutoCAD Goal 6: The student will demonstrate an understanding of the basic commands needed for advanced 2D construction. When drawing a three point arc do you have to use a radius dimension? Why would rotating an object come in handy? Why would mirroring an object be useful? What does it mean to fillet? What does it mean to chamfer? Computers Teacher demonstration using TV monitor on how to do the commands for objectives Drawings that require students to use the commands being taught. AutoCAD LAB Standards: A.1. thru A.9. 11

12 7.1. to set-up a new template to include new layers control set up the following layers (lines, construction lines, hidden lines, center lines, and dimension lines.) Goal 7: Layers The student will be able to use the layers toolbar to set up new layers for their drawings. What are the layers used for? Why is it necessary to use multiply layers? Computers AutoCAD Drawings that require students to set up layers. Teacher demonstration using TV monitor to show students how to set up layers. Class discussion on why layers are important Standards: A.1. thru A.9. 12

13 8.1. dimension all drawings using the dimension toolbar set up dimension styles according to type of drawing they are doing. Goal 8: Dimensioning The student will demonstrate an understanding of the proper way to dimension in AutoCAD. Why is dimensioning in AutoCAD different from dimensioning by hand? Do you have to change your dimension style for each drawing? Computers AutoCAD Drawings that require students to dimension. Drawings that require students to modify the dimension styles. Teacher demonstration using TV monitor to show students how to dimension. Standards A.1. thru A.9. 13

14 9.1. distinguish the relationship between drawing isometric by hand and drawing isometric in AutoCAD set up an isometric template in AutoCAD change the isometric snap by using the design settings. Goal 9: Isometrics in AutoCAD The student will demonstrate an understanding of drawing isometrics in AutoCAD. What needs to be changed to draw in isometric? What makes a template different in isometric? Where can you find the design settings? Computers AutoCAD Drawings that require students to change settings to isometric. (It is recommended to start out with something simple and then progress to harder drawings). Drawings that require students to modify the design settings Teacher demonstration using TV monitor to show students how to change template to make it isometric. LAB Standards: A.1. thru A.9. 14

15 Working Drawings Goal 10: To be able to define a working drawing and prepare a template discuss what a working drawing is and what information needs to be included with them distinguish between a working drawing and an assembly drawing. What information is needed in a working drawing? What information is needed in an assembly drawing? What is the difference between the working drawing and the assembly drawing? Computers AutoCAD Handouts that illustrate assembly drawings. Handouts that illustrate working drawings. Class discussion on comparing the two types of drawings. Project Based Learning Activity: Assign students an item with 5 or less parts that will require them to measure all parts and have them make an assembly drawing and a working drawing. LAB Standards: B.5, B.9, B.11, B B.1. thru B.3. (these standards are also cross-content standards for Science 5.2 & 5.4) 15

16 Goal 11: Product Design To design a toy product to research different toy designs and identify the advantages and disadvantages of each sketch an idea of a new toy design to include all parts, and all views Students will brainstorm new ideas for a toy design. What are the needs? Who are the consumers? Why are the sales down? What type of toy will boost the sales? Paper Pencils Computers Internet Lab Project Based Learning Activity: Students will be assigned a fictitious company. He/She will be required to design a new toy. Complete working drawings and assembly drawings must be included. Teacher Observation Standards: B.5, B.9, B.11, B B.1. thru B.3. (these standards are also cross-content standards for Science 5.2 & 5.4) 16

17 12.1. complete a working drawing of a toy design in AutoCAD complete an assembly drawing of toy design in AutoCAD create and present a marketing program to the class and selected staff members. Applying AutoCAD to Design Process Goal 12: The student will set up a template for working drawings, and assembly drawings. What should the limits be set to for the working drawing? What are some advantages of drawing in AutoCAD compared to drawing by hand? How does industry use AutoCad in the design process? What should the limits be set to for the assembly drawing in AutoCAD? Computers AutoCAD Sketches of drawings Handouts that tell students requirements on Power Point Presentation. Teacher Observation Final Drawings of Toy Design Standards A.1. thru A.9. 17

18 COURSE BENCHMARKS 1. Introduce students to the world of drafting in industry through project-based learning. 2. The student will be able to design a new food product for a given company in order to increase sales. 3. The student will review the importance of AutoCAD in industry. 4. The student will review the basic AutoCad commands learned in Drafting. 5. The student will demonstrate an understanding of the basic commands needed for 2 Dimensional construction. 6. The student will demonstrate an understanding of the basic commands needed for advanced 2 Dimensional construction. 7. The student will be able to use the layers toolbar to set up new layers for their drawings. 8. The student will demonstrate an understanding of the proper way to dimension in AutoCAD. 9. The student will demonstrate an understanding of drawing isometrics in AutoCAD. 10. To be able to define a working drawing and prepare a template. 11. To design a toy product. 12. The student will set up a template for working drawings, and assembly drawings. 18

Content Area: Visual and Performing Arts Subject: Visual Art Course: Studio 2-D Design

Content Area: Visual and Performing Arts Subject: Visual Art Course: Studio 2-D Design SHORE REGIONAL HIGH SCHOOL DISTRICT West Long Branch, New Jersey Content Area: Visual and Performing Arts Subject: Visual Art Course: Mr. Leonard Schnappauf, Superintendent/Principal Dr. Robert McGarry,

More information

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement

COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours

CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction

More information

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation

An Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS.   Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011

More information

AutoCAD LT 2010 Tutorial

AutoCAD LT 2010 Tutorial AutoCAD LT 2010 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2010 Tutorial iii Table

More information

9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN

9'1 -c,f' -,;; Y DEC COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : CAD 120 SEMESTER: I ARCHITECTURAL TECHNICIAN SAULT STE. MARIE, ON SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY COURSE OUfLINE COURSE TITLE: INTRODUCTION TO AUTOCAD CODE NO : SEMESTER: I PROGRAM: ARCHITECTURAL TECHNICIAN INSTRUCTOR: H. PIETRZAKOWSKI

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

Engineering & Computer Graphics Workbook Using SolidWorks 2014

Engineering & Computer Graphics Workbook Using SolidWorks 2014 Engineering & Computer Graphics Workbook Using SolidWorks 2014 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad

1.Module. AutoCAD Course Content. Getting Started with : Vasundhara Sector 14-A, Plot No , Near Vaishali Metro Station,Ghaziabad 1.Module AutoCAD Course Content Getting Started with : Starting the Software User Interface Working with Commands Cartesian Workspace Opening an Existing Drawing File Viewing Your Drawing Saving Your Work

More information

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning.

Required Materials: Textbook: Grabowski, R. (2004). Using AutoCAD 2004: Basics. Clifton Park, N.Y: Delmar Learning. Butler Community College Business, Technology, and Workforce Development COURSE OUTLINE AutoCAD Basics Mel Whiteside Spring 2004 Course Description: EN107. AutoCAD Basics. 3 hours credit. This course will

More information

Required Materials For complete material(s) information, refer to

Required Materials For complete material(s) information, refer to Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.

More information

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.

ARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command. DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2

More information

Fundamentals III PROJECT EXERCISE

Fundamentals III PROJECT EXERCISE 4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. project EXERCISE

More information

In this activity students will create an orthographic drawing. Students will also change line layers.

In this activity students will create an orthographic drawing. Students will also change line layers. Description In this activity students will create an orthographic drawing. Students will also change line layers. Lesson Objectives The student will be able to: Define orthographic drawing Draw three to

More information

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents. Part I Introduction to CorelCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents Part I Introduction to C 2013.... 1 1 Introducing C 2013.... 3 About C... 4 Benefits of Using C....4 Impressive Compatibility... 4 Familiar User Interface.... 5 Drafting Tools.... 5 Collaboration....

More information

Symbols and Standards (Architectural CAD)

Symbols and Standards (Architectural CAD) Design and Drafting Description In this activity the teacher will give an orientation to the symbols and conventions of Architectural CAD. Industry common symbols are used for most of the fixtures and

More information

Engineering & Computer Graphics Workbook Using SOLIDWORKS

Engineering & Computer Graphics Workbook Using SOLIDWORKS Engineering & Computer Graphics Workbook Using SOLIDWORKS 2017 Ronald E. Barr Thomas J. Krueger Davor Juricic SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Drawing a Living Room and Family Room Floorplan

Drawing a Living Room and Family Room Floorplan Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs

More information

CAD Orientation (Mechanical and Architectural CAD)

CAD Orientation (Mechanical and Architectural CAD) Design and Drafting Description This is an introductory computer aided design (CAD) activity designed to give students the foundational skills required to complete future lessons. Students will learn all

More information

ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

More information

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

Part I Introduction to CorelCAD

Part I Introduction to CorelCAD Table of Contents Part I Introduction to CorelCAD 1 Introducing CorelCAD for Mac... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD...

Table of Contents PART I INTRODUCTION TO CORELCAD Introducing CorelCAD About CorelCAD Benefits of Using CorelCAD... Table of Contents PART I INTRODUCTION TO CORELCAD.... 1 1 Introducing CorelCAD.... 3 About CorelCAD... 3 Benefits of Using CorelCAD....4 Impressive Compatibility... 4 Familiar User Interface.... 4 Drafting

More information

Chapter 7 Isometric Drawings

Chapter 7 Isometric Drawings Chapter 7 Isometric Drawings In this assignment, we are going to look at creating isometric drawings with AutoCAD. These drawing appear to be three dimensional but they are not. An AutoCAD isometric drawing

More information

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS

SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/

More information

Basic 2D drawing skills in AutoCAD 2017

Basic 2D drawing skills in AutoCAD 2017 Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.

More information

AutoCAD Essentials. Course Length: 3 days

AutoCAD Essentials. Course Length: 3 days AutoCAD Essentials Course Length: 3 days The AutoCAD Essentials training course is designed for those using AutoCAD with a Windows operating system. This training course is not designed for the AutoCAD

More information

Assignment 12 CAD Mechanical Part 2

Assignment 12 CAD Mechanical Part 2 Assignment 12 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hidden lines, isometric snap, and ellipses commands along with commands previously learned.. General Hidden

More information

First Level 2D Fundamentals

First Level 2D Fundamentals AutoCAD 2016 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Auto-CAD 2005 Seminar DFTG 1091

Auto-CAD 2005 Seminar DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD 2005 Seminar DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS

More information

Auto-CAD Complete DFTG 1091

Auto-CAD Complete DFTG 1091 HOUSTON COMMUNITY COLLEGE SOUTHWEST Auto-CAD Complete DFTG 1091 Date and Time of class: Class CRN: Instructor s Name: School Site: Phone number: HOUSTON COMMUNITY COLLEGE SOUTHWEST COURSE SYLLABUS Auto-CAD

More information

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals AutoCAD 2014 Tutorial - First Level: 2D Fundamentals Randy H. Shih Multimedia Disc SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

AutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods

AutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Introduction to AutoCAD 2010

Introduction to AutoCAD 2010 Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 7 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso.dwt. 3. Call the

More information

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011 AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric

More information

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT

More information

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor

ESSENTIALS. Munir M. Hamad Autodesk Approved Instructor AUTOCAD 2010 ESSENTIALS Munir M. Hamad Autodesk Approved Instructor 76299_FMxx_FINAL.indd i 6/1/09 11:00:49 AM World Headquarters Jones and Bartlett Publishers 40 Tall Pine Drive Sudbury, MA 01776 978-443-5000

More information

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4

COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).

More information

CAD Mechanical Design I

CAD Mechanical Design I EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance

More information

WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING

WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate

More information

INTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing

INTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing INTRODUCTION to CAD ACAD BASICS 2.1 Starting with ACAD 2.2 Layout and sketching 2.3 Drawing environment 2.4 Elements of drawing 2.4.1 Draw commands 2.5 3D functions 2.6 Starting the drawing 2.6.1 Drawing

More information

Isometric Drawing Chapter 26

Isometric Drawing Chapter 26 Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like

More information

Copyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material

Copyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material Engineering Graphics FREEHAND SKETCHING Introduction to Freehand Sketching Sketching is a very important technique for technical communication. Sketches can transfer ideas, instructions and information

More information

Fundamentals III CHAPTER PROJECT EXERCISE

Fundamentals III CHAPTER PROJECT EXERCISE CHAPTER 4 Fundamentals III PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in Figure P4 1. FIGURE

More information

06/17/02 Page 1 of 12

06/17/02 Page 1 of 12 Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive

More information

IN-CLASS DEMONSTRATION. Introduction to AutoCAD 2011 and 2-Dimensional Drawing

IN-CLASS DEMONSTRATION. Introduction to AutoCAD 2011 and 2-Dimensional Drawing IN-CLASS DEMONSTRATION Introduction to AutoCAD 2011 and 2-Dimensional Drawing GISC, UNIVERSITY OF CALIFORNIA BERKELEY LABORATORY GOALS In this module you will be introduced to the AutoCAD 2011 interface

More information

Dimensioning the Rectangular Problem

Dimensioning the Rectangular Problem C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing

More information

Introduction to IntelliCAD 6

Introduction to IntelliCAD 6 Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD

More information

Computer Aided Design I

Computer Aided Design I Black Horse Pike Regional School District 580 Erial Road, Blackwood, NJ 08012 Computer Aided Design I COURSE OF STUDY Technology Department Written by: Ken Whalen, Steve Arena and Vince Mannino Date: May

More information

SOLIDWORKS 2018 Basic Tools

SOLIDWORKS 2018 Basic Tools SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

When you complete this assignment you will:

When you complete this assignment you will: Objjectiives When you complete this assignment you will: 1. Set-up menus and drawing for designing modeling problems. 2. become familiar with the Sketch menu tools and commands. 3. Produce a three-dimensional

More information

COURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR

COURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY

More information

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC

Parametric Modeling. with. Autodesk Inventor Randy H. Shih. Oregon Institute of Technology SDC Parametric Modeling with Autodesk Inventor 2009 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. iii Table of

More information

Technology Education Grades Drafting I

Technology Education Grades Drafting I Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity

More information

CAD & BSI Theory. Arbroath Academy - Technology Department - National 5 Graphic Communication

CAD & BSI Theory. Arbroath Academy - Technology Department - National 5 Graphic Communication CAD & BSI Theory These symbols are drawn from BSI. Building Drawing Symbols You may be required to use these symbols in your assignment or project, or be asked questions about them in your exam. You must

More information

Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material

Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2008 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better

More information

TECHNICAL DESIGN I (540)

TECHNICAL DESIGN I (540) DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering

More information

SOLIDWORKS 2015 and Engineering Graphics

SOLIDWORKS 2015 and Engineering Graphics SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

COURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR

COURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10-12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY

More information

Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material

Copyrighted. Material. Copyrighted. Material. Copyrighted. Material. Copyrighted. Material ENGINEERING & COMPUTER GRAPHICS WORKBOOK Using SolidWorks 2005 Ronald E. Barr Thomas J. Krueger Theodore A. Aanstoos Davor Juricic SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com

More information

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI

SolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information

EDUCATIONAL REND LAKE COLLEGE CAD INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING REVISED: FALL 2010 INSTRUCTOR: THOMAS ARPASI

EDUCATIONAL REND LAKE COLLEGE CAD INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING REVISED: FALL 2010 INSTRUCTOR: THOMAS ARPASI INSTRUCTOR: THOMAS ARPASI REND LAKE COLLEGE CAD 1201-51 INTRODUCTION TO COMPUTER-AIDED DRAFTING ISOMETRIC DRAWING 1 Pictoral Drawing Pictoral drawing have evolved from cave paintings to photorealistic

More information

80 ` AutoCAD 2D I. Module 7. Drawing Lines Using Polar Coordinates PREPARED BY. IAT Curriculum Unit. February 2011

80 ` AutoCAD 2D I. Module 7. Drawing Lines Using Polar Coordinates PREPARED BY. IAT Curriculum Unit. February 2011 80 ` AutoCAD 2D I Module 7 Drawing Lines Using Polar Coordinates PREPARED BY IAT Curriculum Unit February 2011 Institute of Applied Technology, 2011 Module 7 Auto CAD Self-paced Learning Modules AutoCAD

More information

1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7)

1 Higher National Unit credit at SCQF level 7: (8 SCQF credit points at SCQF level 7) Higher National Unit specification General information Unit code: DW1E 34 Superclass: CH Publication date: August 2006 Source: Scottish Qualifications Authority Version: 03 (August 2016) Unit purpose This

More information

Rapid CADD Training Techniques

Rapid CADD Training Techniques Rapid CADD Training Techniques Warner Richeson, CADD Professor Business, Information & Engineering Technologies Collin College, Frisco, Texas 75074 ABSTRACT The purpose of this paper is to describe a technique

More information

Dimensioning the Bracket Problem

Dimensioning the Bracket Problem C h a p t e r 11 Dimensioning the Bracket Problem In this chapter, you will learn the following to World Class standards: 1. Dimensioning a Multiple View Drawing 2. Placing Center Marks on a Multiple View

More information

Isometric Drawings. Figure A 1

Isometric Drawings. Figure A 1 A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an

More information

Lesson 6 2D Sketch Panel Tools

Lesson 6 2D Sketch Panel Tools Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,

More information

COURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:

COURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ

More information

LABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F

LABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F LABORATORY MANUAL COMPUTER AIDED DESIGN LAB ME-211-F List of Experiments:- Sl. No. Name of experiment Date Signature 01 02 Setting up of drawing environment by setting drawing limits, drawing units, naming

More information

Autodesk Inventor 2016 Creating Sketches

Autodesk Inventor 2016 Creating Sketches Autodesk Inventor 2016 Creating Sketches 2D Sketch Practice 1 1. Launch Autodesk Inventor 2016 2. Create a new Part file (.ipt) 3. Save File As a. Click on the save icon. b. Save you file onto your flash

More information

Introduction to Autodesk Inventor for F1 in Schools (Australian Version)

Introduction to Autodesk Inventor for F1 in Schools (Australian Version) Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital

More information

SOLIDWORKS 2017 Basic Tools

SOLIDWORKS 2017 Basic Tools SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

LABORATORY MANUAL COMPUTER AIDED DESIGN LAB

LABORATORY MANUAL COMPUTER AIDED DESIGN LAB LABORATORY MANUAL COMPUTER AIDED DESIGN LAB Sr. No 1 2 3 Experiment Title Setting up of drawing environment by setting drawing limits, drawing units, naming the drawing, naming layers, setting line types

More information

CADD I. A1 A2. I can recall from my notebook all course content and grading procedure. A3. I can list 3 ways Cadd impacts industry. B.

CADD I. A1 A2. I can recall from my notebook all course content and grading procedure. A3. I can list 3 ways Cadd impacts industry. B. St. Michael Albertville High School Teacher: Scott Danielson CADD I September 2016 CADD 1 Content Skills Learning Targets Standards Assessment Resources & Technology CEQ: WHAT AND HOW IS COMPUTER AIDED

More information

and Engineering Graphics

and Engineering Graphics SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

AutoCAD /AutoCAD LT Essentials

AutoCAD /AutoCAD LT Essentials AutoCAD /AutoCAD LT Essentials Course Length: 3 days The AutoCAD /AutoCAD LT Essentials training course is designed for those using AutoCAD or AutoCAD LT with a Windows operating system. This training

More information

CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean

CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces

More information

Isometric Circles and Arcs

Isometric Circles and Arcs AutoCAD and Its Applications BASICS Supplemental Material Chapter 4 Isometric Circles and Arcs On an isometric drawing, circles appear as ellipses and arcs as elliptical arcs. You must properly align isometric

More information

When you complete this assignment you will:

When you complete this assignment you will: Objjectiives When you complete this assignment you will: 1. sketch and dimension circles and arcs. 2. cut holes in the model using the cut feature of the extrusion command. 3. create Arcs using the trim

More information

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.

AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here. AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and

More information

Parametric Drawing Using Constraints

Parametric Drawing Using Constraints CHAPTER 10 Parametric Drawing Using Constraints PROJECT EXERCISE This project exercise provides point-by-point instructions for creating the objects shown in Figure P10 1. In this exercise, you will apply

More information

Analytic Geometry/ Trigonometry

Analytic Geometry/ Trigonometry Analytic Geometry/ Trigonometry Course Numbers 1206330, 1211300 Lake County School Curriculum Map Released 2010-2011 Page 1 of 33 PREFACE Teams of Lake County teachers created the curriculum maps in order

More information

Introduction to AutoCAD 2010

Introduction to AutoCAD 2010 Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 5 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Call the Polyline tool, either by entering

More information

80 ` AutoCAD 2D I. Module 11. Object Snap PREPARED BY. IAT Curriculum Unit. February 2011

80 ` AutoCAD 2D I. Module 11. Object Snap PREPARED BY. IAT Curriculum Unit. February 2011 80 ` AutoCAD 2D I Object Snap PREPARED BY IAT Curriculum Unit February 2011 Institute of Applied Technology, 2011 Auto CAD Self-paced Learning Modules AutoCAD 2D Object Snap Learning Outcomes: When you

More information

Pictorial Drawings. DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor

Pictorial Drawings. DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor Pictorial Drawings Geisecke s textbook for reference: 14 th Ed. Ch. 15: p. 601 Ch. 16: p. 620 15 th Ed. Ch. 14: p. 518 Ch. 15: p. 552 Update:

More information

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih

Tools for Design. Using AutoCAD 2016 and Autodesk Inventor 2016 SDC. Hand Sketching, 2D Drawing and 3D Modeling. Randy H. Shih Tools for Design Using AutoCAD 2016 and Autodesk Inventor 2016 Hand Sketching, 2D Drawing and 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered

More information