Wholly Sheets, Batman - Plotting in AutoCAD Civil 3D Seth Cohen Advanced Technologies Solutions Inc.
|
|
- Myra Morgan
- 5 years ago
- Views:
Transcription
1 Seth Cohen Advanced Technologies Solutions Inc. CV637 Are you confused about how to plot all the different views (plan, profile, and cross sections) in AutoCAD Civil 3D software? Then this class is for you. We will discuss the settings and styles that help to automate the plotting of your projects, whether they include plans, profiles, cross sections, or a combination of these sheet sets. We will also examine the necessary settings required for your drawing templates to make the plotting process a breeze. In addition, we will cover some of the AutoCAD software plotting functionality that you can capitalize on. Come and learn how to automate the plotting of your projects using AutoCAD Civil 3D software (no Robin required). Batman is a trademark of DC Comics. Learning Objectives At the end of this class, you will be able to: Learn how to plot plan and profile sheets in AutoCAD Civil 3D software Learn how to plot cross section sheets in AutoCAD Civil 3D software Learn how to use Sheet Set Manager Learn how to set up styles and settings related to plotting in AutoCAD Civil 3D software About the Speaker Seth Cohen is Vice President Strategic Business Development and Senior Civil Infrastructure Specialist at Advanced Technologies Solutions Inc. He specializes in civil engineering and CAD applications including Autodesk InfraWorks, Civil 3D, Map 3D, AutoCAD, MicroStation, and InRoads. He has conducted many classes for CAD professionals and specializes in providing project start-up and CAD standards implementation for commercial and government organizations. He has over 15 years of civil engineering experience, working in the industry as a CAD technician and CAD manager designing and producing production plans for many state departments of transportation (DOTs) and municipalities. scohen@atsicad.com
2 Plan and Profile There are many Civil 3D and AutoCAD settings and styles that you need to understand prior to plotting your plan and profile sheets. In this section, we will break it down. Civil 3D Setup In Civil 3D, you need to setup your drawing or drawing template to apply the correct settings and styles. Settings and Styles Styles and settings will need to be developed for plotting plan, and plan and profile sheets. The settings tab is where some of the setup is done related to plotting plan and profile sheets. The following settings will need to be looked at. Profile Views View Frame Groups View Frame o Styles Match Line o Styles 2
3 AutoCAD Setup There are many standard AutoCAD settings that will need to be addressed. Below is a list of some of the AutoCAD setup that you will need to look at. Template Files In the template, you will need to setup sheets with the correct viewport scale as well as page setups. Also, Civil 3D leverages Sheet Set Manger functionality, and you will need to define attributes to automate titleblock population. There is also a special viewport setting that enables Civil 3D to identify the type of viewport it is. The settings are Plan, Profile, or Undefined. TIP: The north arrow block must exist in the title block. 3
4 Sheet Set File Setup a template.dst file that has appropriate sheet set fields to automate population in title block. The default DST file should contain project properties and additional project specific plotting settings. The following is a workflow for creating sheets. Creating Sheets Create View Frames (VF) Output Tab > Plan Production Panel > Create View Frames o Create View Frames Wizard o Choose Alignment o Choose Sheets (i.e. drawing template, etc.) o VF Group Settings o Match Line Settings o INITIAL Profile View Settings The VF s will be created in the current file 4
5 Create Sheets Output Tab > Plan Production Panel > Create Sheets o Create Sheets Wizard o Choose layout options o Choose existing sheet set file, or create new o Profile View Settings (recommended to edit now) o Data References The file you are in will get referenced into the sheets automatically. If you need to add more references, you can do so afterwards. 5
6 Editing Sheets The Create Sheets wizard will get your sheets 85% completed. You will then need to manually edit some portions. For example, you may need to adjust profile views, and profile view bands. To edit sheets, use tools in sheet set manager to manipulate sheets (e.g. numbering, naming, etc.) 6
7 Plotting Use tools in sheet set manager to publish or plot sheets. TIP: Regarding the match line hatching area, be aware. You may need to manipulate the reference layer color to slightly off-white (254,254,254) for it to plot white, and not black 7
8 Cross Sections Civil 3D Setup There are many Civil 3D and AutoCAD settings and styles that you need to understand prior to plotting your cross section sheets. In this section, we will break it down. Settings and Styles The settings tab is where some of the setup is done related to plotting cross section sheets. The following settings will need to be looked at. Settings tab o Section Views Section Styles o Styles Code Set Style o Styles Group Plot Styles 8
9 AutoCAD Setup There are many standard AutoCAD settings that will need to be addressed. Below is a list of some of the AutoCAD setup that you will need to look at. Files Setup In the template, you will need to setup sheets with the correct viewport scale as well as page setups. Also, Civil 3D leverages Sheet Set Manger functionality, and you will need to define attributes to automate titleblock population. There is also a special viewport setting that enables Civil 3D to identify the type of viewport it is. The settings are Plan, Profile, Section, or Undefined. Sheet Set File Setup a template.dst file that has appropriate sheet set fields to automate population in title block. The default DST file should contain project properties and additional project specific plotting settings. Create Section Sheets Prior to creating section views, data shortcuts should be used to reference in the alignment so that you can create a sample line group. Then, you need to reference in the file that the corridor and existing surface is located in, and the sample line group can be setup to sample those sources automatically. Create Multiple Section Views Home Tab > Profile & Section Views panel Section Views > Create Multiple Section Views Create Multiple Section Views Wizard o General o Section Placement o Offset Range o Elevation Range o Section Display Options o Data Bands o Section View Tables Create Sheets Output Tab > Plan Production Panel > Create Section Sheets o Create Section Sheets Dialog Box o Set options The file you are in is the file the layouts will be created in. 9
10 Editing Sheets Editing Create Section Sheets command will get your sheets 95% completed, however you may need to adjust the layout views Plotting Named Page Setup gets copied from drawing template automatically use tools in sheet set manager to publish or plot sheets. 10
11 CV637 Wholly Sheets Batman! Plotting in AutoCAD Civil 3D Thank You! Please complete the Survey for this class for a chance to win a FREE pass to AU2015! Seth Cohen scohen@atsicad.com 11
Create all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings.
NOTES Module 18 Roadway Plan Production In this module, you learn how to work with Roadway Plan Production tools in AutoCAD Civil 3D. The Plan Production tools are used to automate the generation of plan
More informationSheets Happen! Using the Sheet Set Manager
Sheets Happen! Using the Sheet Set Manager Westwood Professional Services June 2007 Using AutoCAD s Sheet Set Manager Introduction The Sheet Set Manager organizes, displays, and manages sheet sets, a named
More informationExercise 1: The AutoCAD Civil 3D Environment
Exercise 1: The AutoCAD Civil 3D Environment AutoCAD Civil 3D Interface Object Base Layer Object Component Layers 1-1 Introduction to Commercial Site Grading Plans AutoCAD Civil 3D Interface AutoCAD Civil
More informationHow to Design and Submit a DOT Project with Civil 3D
11/30/2006-5:00 pm - 6:30 pm Room:San Polo - 3503 (ISD Campus) How to Design and Submit a DOT Project with Civil 3D Seth Cohen - ProSoft NET CV35-2 This lab will delve into the workflows and processes
More informationCorridors. To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.
Corridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment: (1) Alignments > Create
More informationZooming in on Architectural Desktop Layouts Alexander L. Wood
December 2-5, 2003 MGM Grand Hotel Las Vegas Alexander L. Wood Code BD41-3L Take advantage of both AutoCAD and Autodesk Architectural Desktop Layout features. We'll look at the basics of setting up AutoCAD
More informationAdvanced Topics Using the Sheet Set Manager in AutoCAD
Advanced Topics Using the Sheet Set Manager in AutoCAD Sam Lucido Haley and Aldrich, Inc. GEN15297 Do you still open drawings one at a time? Do you print drawings one at a time? Do you update the index
More informationPlotting from Start to Finish With AutoCAD 2004
December 2-5, 2003 MGM Grand Hotel Las Vegas Plotting from Start to Finish With AutoCAD 2004 Speaker: J.C. Malitzke Assistant: David Harrington Assistant: Shaan Hurley Driver: Craig Black Code: GD11-1L
More informationCBCL Limited Sheet Set Manager Tutorial 2013 REV. 02. CBCL Design Management & Best CAD Practices. Our Vision
CBCL Limited Sheet Set Manager Tutorial CBCL Design Management & Best CAD Practices 2013 REV. 02 Our Vision To be the most respected and successful Atlantic Canada based employeeowned firm, delivering
More informationCreating and Editing Plot Style Tables
AutoCAD and Its Applications BASICS Supplemental Material Chapter 28 Creating and Editing Plot Style Tables The plot style tables supplied with AutoCAD are appropriate for many plotting applications. Use
More informationMontana Association of Registered Land Surveyors Conference 2013
AutoCAD CIVIL 3D Survey Features - Field to Finish This session is an introduction to the Civil 3D Survey Tools. We will cover some basics of working with Survey Databases and Automated Linework. We will
More informationPublish Drawing Sets with Ease in AutoCAD 2004 Speaker: Heidi Hewett Assistants: Shaan Hurley & Matt Murphy
December 2-5, 2003 MGM Grand Hotel Las Vegas Publish Drawing Sets with Ease in AutoCAD 2004 Speaker: Heidi Hewett Assistants: Shaan Hurley & Matt Murphy GD21-4L During this hands-on lab, you will publish
More informationCreating and Editing Plot Style Tables
AutoCAD and Its Applications BASICS Supplemental Material Chapter 28 2013 Creating and Editing Plot Style Tables The plot style tables supplied with AutoCAD are appropriate for many plotting applications.
More informationState of Florida Department of Transportation. FDOT Traffic Plans. Signing & Pavement Markings (CE ) Signalization (CE ) Lighting
State of Florida Department of Transportation FDOT Traffic Plans Signing & Pavement Markings (CE-11-0117) Signalization (CE-11-0119) Lighting (CE-11-0118) User Training Manual October 2017 PRODUCTION SUPPORT
More informationProject Workbook. Stantly. AutoCAD. Civil 3D Introduction to Commercial Site Grading Plans Autodesk Authorized Training Courseware (AATC)
AutoCAD Stantly Project Workbook Civil 3D 2008 Introduction to Commercial Site Grading Plans Autodesk Authorized Training Courseware (AATC) 23705-050008-1740A October 2007 About this Workbook This book
More informationRecord As-Built Drawings for Capital Projects
Section 19.1 Record As-Built Drawings for Capital Projects Overview - Section 19.1 Internal Use: Full compliance where applicable Contractor Use: Full compliance where applicable The intention of this
More informationLas Vegas, Nevada November 27-30, 2001
Las Vegas, Nevada November 27-30, 2001 Speaker Name: Phil Leverault Course Title: Conquering Dimensions Course ID: Course Outline: Factors to Consider for Dimension Styles Discipline Mechanical Dimensioning
More informationCome Back to the Other Side - AutoCAD for MicroStation Users
11/30/2005-8:00 am - 9:30 am Room:Peacock 2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Come Back to the Other Side - AutoCAD for MicroStation Users Mark Mates - ProSoft GD31-2 This
More informationCorridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.
Corridors 2018-2019 To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment from scratch: (1)
More informationMastering. AutoCAD Sheet Sets THE COVER. An Expert Guide
Mastering THE COVER Qui volore imagnihillit que la nimolora vellorendemporaecab imperit harum que dolor mint faccabori inveles et fugitibus dioris maiones. AutoCAD Sheet Sets An Expert Guide Contents Introduction
More informationNo Sheet! You can do that with the SSM in AutoCAD
. No Sheet! You can do that with the SSM in AutoCAD Sam Lucido CAD Services Manager Haley and Aldrich, Inc. @CADproTips Join the conversation #AU2015 Class summary The Sheet Set Manager (SSM) in AutoCAD
More informationCreate styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.
NOTES Module 03 Settings and Styles In this module, you learn about the various settings and styles that are used in AutoCAD Civil 3D. A strong understanding of these basics leads to more efficient use
More informationOutput a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout.
Printing Output a drawing layout to a printer, a plotter, or a file. Save and restore the printer settings for each layout. Originally, people printed text from printers and plotted drawings from plotters.
More informationAutoCAD Civil 3D Fundamentals
AutoCAD Civil 3D Fundamentals Course Length: 4 days The AutoCAD Civil 3D Fundamentals training course is designed for Civil Engineers and Surveyors who want to take advantage of the AutoCAD Civil 3D software
More informationAppendix to Chapter 1 Release 3
Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationCSI: CAD Standards Implementation
CSI: CAD Standards Implementation Sam Lucido Haley and Aldrich, Inc. IT15277 Did you know that AutoCAD has a CAD Standards Manager? Yes, there is a panel on the Ribbon under the manage tab where you can
More informationPlotting from A to Z
Las Vegas, Nevada, December 3 6, 2002 Speaker Name: J.C. Malitzke Course Title: Plotting from A to Z Course ID: GD23-2 Course Outline: This class offers both AutoCAD veterans and new users the chance to
More informationHVAC in AutoCAD MEP: New and Improved. David Butts Gannett Fleming MP3724-L. Learning Objectives. At the end of this class, you will be able to:
David Butts Gannett Fleming MP3724-L In the Building Information Modeling (BIM) world, there are still many users who have AutoCAD MEP but aren't ready to make the move to Autodesk Revit for a variety
More informationAssignment 13 CAD Mechanical Part 2
Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's
More informationThe Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design
The Rest of the Story: Using Autodesk Inventor Tools to Complete Facilities Design Documentation and Design Instructor: Mike Jolicoeur Autodesk Lab Assistants: Sachlene Singh Autodesk Steve Schuchard PMC
More informationFull Contents. Essentials, Workbook
Section 1: Overview Essentials 1.1 Introduction... 3 Learning InRoads... 3 Basic Rules... 3 How to Use This Guide... 4 Section Breakdown... 5 Section 1: Overview Essentials... 5 Section 2: Production Essentials...
More informationDimension Styles. EDT Chapter 18 - Basic Dimensioning Practices 1
Dimension Styles EDT 310 - Chapter 18 - Basic Dimensioning Practices 1 Dimension Styles The appearance of dimensions is controlled by over 70 different settings. Dimension Styles are saved configurations
More informationLD20558-L Parking Lots with AutoCAD Civil 3D Corridors
LD20558-L Parking Lots with AutoCAD Civil 3D Corridors Steven Hill CAD Manager, Civil Designer / Geosyntec Consultants.NET Application Developer / Red Transit Consultants, LLC Learning Objectives Discover
More informationThree Steps to Dynamic View for BIM Applications
Three Steps to Dynamic View for BIM Applications The process of creating and using dynamic views can seem daunting to even the most experienced user. The Bentley BIM applications provide tools to somewhat
More informationCOPYRIGHTED MATERIAL. Welcome to the Civil 3D Environment
Welcome to the Civil 3D Environment Chapter 1 To paraphrase, Civil 3D isn t your father s AutoCAD. If you re just getting into the Civil 3D environment, want to learn how to get around in models, and would
More informationCI L Planes, Trains and Automobiles with Vehicle Tracking How To use Vehicle Tracking
CI121345-L Planes, Trains and Automobiles with Vehicle Tracking How To use Vehicle Tracking Heidi Boutwell CADLearning Learning Objectives Discover and understand Vehicle Tracking software alongside using
More informationBIM Workflow for Roads and Highways Using the Autodesk Portfolio
BIM Workflow for Roads and Highways Using the Autodesk Portfolio Course Length: 2 days Important note: This training guide is based on the Autodesk 2014 Infrastructure software portfolio, including Autodesk
More informationBC Ministry of Transportation and Infrastructure Civil 3D Terms of Reference
BC Ministry of Transportation and Infrastructure Civil 3D Terms of Reference BC Supplement to TAC Section 1280 [January 2017 - Provisional] BLANK PAGE Contents 1280.01 General... 1 1280.02 Terms of Reference:
More informationInfraWorks into Civil 3D
Eric Chappell Autodesk Learn about taking conceptual designs in InfraWorks and bringing them into Civil 3D for final design. We ll take a detailed look at how InfraWorks models our design, and exactly
More informationCADD & Civil 3D User Guidelines
THURSTON COUNTY PUBLIC WORKS DEPARTMENT Design and Construction Division CADD & Civil 3D User Guidelines V4.0_06_10_15 1 THURSTON COUNTY PUBLIC WORKS DEPARTMENT DESIGN AND CONSTRUCTION DIVISION CADD &
More informationConnecting the Dots Is for Kids: Advanced Survey Workflows in Autodesk AutoCAD Civil 3D
Connecting the Dots Is for Kids: Advanced Survey Workflows in Autodesk AutoCAD Civil 3D Brian Levendowski, PE CAD Technology Center, Inc. CI3217-P Collection and processing of survey data is a crucial
More informationDetermining and Setting Plot Style Behavior
Initial Template Setup Template Development Objectives You will complete the following tasks during this stage of template development: Determine and set plot style behavior. Save mechanical, architectural,
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationAutodesk Architectural Desktop Functionality for the Autodesk Building Systems User
11/28/2005-1:00 pm - 2:30 pm Room:N. Hemispheres (Salon A1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Architectural Desktop Functionality for the Autodesk Building Systems
More informationChapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationFull Contents. InRoads Essentials
Section 1: Overview Essentials 1.1 Introduction... 3 Learning InRoads... 3 Basic Rules... 3 How to Use This Guide... 4 Section Breakdown... 5 Section 1: Overview Essentials... 5 Section 2: Production Essentials...
More informationSubdivision Cross Sections and Quantities
NOTES Module 11 Subdivision Cross Sections and Quantities Quantity calculation and cross section generation are required elements of subdivision design projects. After the design is completed and approved
More informationA selection of files of content to give the out of the box experience of a local product. Local standards in drawing production, design and reporting
A t CAD Civil AutoCAD Ci il 3D 2011 UK and Ireland Country Kit Jack Strongitharm Application Engineer What is a Country Kit? A selection of files of content to give the out of the box experience of a local
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationA Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2015 All rights reserved. No
More informationAutodesk Inventor Drawing Manager Tips & Tricks
Alessandro Gasso Autodesk, Inc. MA1280 This class covers several workflows that answer the most common questions from the Inventor users about the Drawing Manager. You will learn how to add the scale value
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More informationComputer Aided Drafting and Design Competence
POLYTECH High School Class of 2012 Student: Instructors: Carlton Norris, Robert Bogdziewicz Instructor Signature: Date: Student Signagure: Date: Competency Based Education objectives rating: 1= Was introduced
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationWhat is a Survey? The site plan is usually based on an professional land survey.
Site Plan: Illustrates the existing natural and built features of a site and describes proposed construction in relation to the existing features. The site plan is essential for studying the influence
More informationAnchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationPractice Workbook. Cross Sections: Creating, Annotating, and Volumes
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
More informationA Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2017 All rights reserved. No
More informationInserting and Creating ImagesChapter1:
Inserting and Creating ImagesChapter1: Chapter 1 In this chapter, you learn to work with raster images, including inserting and managing existing images and creating new ones. By scanning paper drawings
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More information14 - Dimensioning. Dimension Styles & settings. Arrows tab.
14 - Dimensioning Dimensioning is always a complex topic in any CAD system because there are so many options and variables to deal with. progecad collects all the numerous settings together in the Dimension
More informationSETTING UP YOUR PAGE LAYOUT:
In this workshop we will look at: Setting up your drawing sheet Viewports Printing your work Once you ve drawn your work in the Model space and you re ready to print, you need to set up your Drawing Sheet
More informationCAD for Maintenance Engineers
Unit 32: Unit code CAD for Maintenance Engineers F/615/1501 Unit level 4 Credit value 15 Introduction There is a growing trend, in part due to the popularity of three-dimensional (3D) Computer Aided Design
More informationAutoCAD Civil 3D 2013 South African Country Kit
AutoCAD Civil 3D 2013 South African Country Kit Contents 1 General... 3 1.1 Introduction from the author and creator... 3 1.2 Overview... 4 2 Drawing Settings... 8 2.1 Edit Drawing Settings... 8 3 Layers...
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationType A. BWSC CAD Standards for Site Plans (Design and As-Built) Format. Scale. Fonts, Linetypes, Shapes
BWSC CAD Standards for Site Plans (Design and As-Built) Type A The following CAD standards are for Type A application and involve no work in Public Street, except for connection(s) to the Boston Water
More informationAUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style
AUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style Donnia Tabor-Hanson Cope Architecture AB3279 After many years of having a successful Autodesk University class on AUGI tips and tricks featuring
More informationAutoCAD Electrical Fundamentals with NFPA Standards
AutoCAD Electrical Fundamentals with NFPA Standards Course Length: 3 days The AutoCAD Electrical Fundamentals with NFPA Standards training course covers the indispensable core topics for working with the
More informationDesign, Drawing and Sheet Composition
Design, Drawing and Sheet Composition Tools, Technologies and Concepts 1 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated 2 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated
More informationAutoCAD Architecture 2014
CADLearning for AutoCAD Architecture 2014 Course Details 19+ hours of training 325 video tutorials Exercise files included Instructor: Reid Addis Course Description CADLearning for AutoCAD Architecture
More informationGetting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
More informationRRR Design & Modeling with the FDOT Civil 3D State Kit
RRR Design & Modeling with the FDOT Civil 3D State Kit Mike Racca - CADD Applications Development Specialist Production Support Office CADD 605 Suwannee St - MS 40, Tallahassee, Florida 32399 Session Objectives:
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationLearning Objectives. Description. Your AU Experts: Gabriel Hernandez Applied Software. David Ronson Applied Software
MSF21377 The Optimal Revit to Fab Workflow Gabriel Hernandez Applied Software David Ronson Applied Software Learning Objectives Design to Fabrication workflows General modification of Fabrication parts
More informationAdvance Concrete 2014 Service Pack 1
Advance Concrete 2014 Service Pack 1 This document describes the improvements in Service Pack 1 for Advance Concrete 2014. GENERAL Interaction between Advance Concrete and Advance Steel. Advance Steel
More informationSKKK 1021 Engineering Drawing
SKKK 1021 Engineering Drawing Introduction to AutoCAD Agus Arsad Introduction Overview & background Starting, interface & file system Basic drawing commands Basic editing commands View command Why use
More informationImplementing BIM for infrastructure: a guide to the essential steps
Implementing BIM for infrastructure: a guide to the essential steps See how your processes and approach to projects change as you adopt BIM 1 Executive summary As an ever higher percentage of infrastructure
More informationUT D Substation Design A Brownfield Approach
UT10893 3D Substation Design A Brownfield Approach Greg Nightingale SA Power Networks, South Australia. Learning Objectives Learn how to design in 3D with the intention to combine with existing substation
More informationGetting Started. Carlson Field to Finish
Professional Land Surveyors of Ohio 2016 Annual Conference -- Dayton Ohio Getting Started with Carlson Field to Finish Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and
More informationOVERRIDE PRESETS. Use the properties window on individual lines to accomplish this change.
OVERRIDE PRESETS Despite having set line weights up in a drawing, it is often necessary to add individual lines of different weights for example, ground lines in sections and elevations must be a thicker
More informationUp And Down The Scales In AutoCAD
Up And Down The Scales In AutoCAD Bill Fane BCIT, CADALYST, etc GD319-2 One of the first Learning Curve columns written for CADalyst magazine 20 years ago covered the topic of handling drawing scales in
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationIntroduction To Computer-Aided Boat Design (CAD)
LESSON THIRTY Introduction To Computer-Aided Boat Design (CAD) Lesson Overview and Objectives: This lesson is intended to introduce students to the hardware and software that is need to perform computer-aided
More informationSection 4: Ontario Realty Corporation CAD Standards and Guidelines
Section 4: Ontario Realty Corporation CAD Standards and Guidelines Ontario Realty Corporation 11 th Floor, Ferguson Block 77 Wellesley Street West Queen s Park Toronto, ON, M7A 2G3 August 10, 2007 Version
More informationAny student may retake any class at any time and for any reason without additional charge.
1 ENVISIONCAD ABOUT US Guaranteed Training 1 ENVISIONCAD ABOUT US EnvisionCAD is a provider of training solutions for MicroStation and select InRoads products. We also use our expertise to assist organizations
More informationPractice Workbook. Cross Sections: Creating, Annotating, and Volumes. SELECTseries 4 ( ) or newer
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand self study. The explanations and demonstrations are provided by the instructor in the classroom, or
More informationAutoCAD & AutoCAD LT The book you need to succeed! DVD Included! Ellen Finkelstein. Start drawing today with Quick Start tutorial
DVD Included! Trial versions of AutoCAD 2011 and AutoCAD LT 2011 Drawings for the exercises, add-on programs, and more Ellen Finkelstein AutoCAD 2011 & AutoCAD LT 2011 Start drawing today with Quick Start
More informationA Practical Guide to Carlson Survey 2014
A Practical Guide to Carlson Survey 2014 Level 1 Rick Ellis A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2014 All rights reserved. No part of this publication may be reproduced
More informationAutodesk Advance Steel. Drawing Style Manager s guide
Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style
More informationUSING LAYERS. Chapter 18 - Layers 117
USING LAYERS KNOWLEDGE AND UNDERSTANDING After completing this module, you will know and understand the theory regarding: layers different layer settings the use of layers in templates APPLICATION OF KNOWLEDGE
More informationGEN20604 Intelligent AutoCAD Model Documentation Made Easy
GEN20604 Intelligent AutoCAD Model Documentation Made Easy David Cohn 4D Technologies Learning Objectives Learn how to create base views and projected views from 3D models Learn how to create and control
More informationStep It Up a Rung from AutoCAD Designs to AutoCAD Electrical
Step It Up a Rung from AutoCAD Designs to AutoCAD Electrical Todd Schmoock Synergis Technologies MA4762-L: AutoCAD Electrical has proven to be easy for creating electrical controls system designs. It has
More information036-ShopDrawings hsbinoutput/shop Drawings
1 FUNCTION The function of this document is to provide information on how to use the shop drawings (hsbinoutput\shop drawings) in hsb2009+. In hsbcad you have Element drawings that can be generated automatically
More informationComputer-Aided Drafting and Design Technology, A.A.S.
Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and
More informationAutoCAD LT Drawing Templates
AutoCAD LT Section 4 AutoCAD LT Drawing Templates This section covers: 1. Creating new files and working with existing files a. Start a new drawing from scratch b. Use the new drawing wizard c. Create
More informationDraw IT 2016 for AutoCAD
Draw IT 2016 for AutoCAD Tutorial for System Scaffolding Version: 16.0 Copyright Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Getting Started...
More information