THE CREST - UNIT 401 & 302
|
|
|
- Elvin Floyd
- 5 years ago
- Views:
Transcription
1 THE CREST - UNIT 401 & TH AND QUEBEC, VANCOUVER, BC CLIENT: FORRESTER & GODFREY SUITE INTERIOR FINISHES DRAWINGS AND SPECIFICATIONS DRAWING LIST PLANS & ELEVATIONS SPECIFICATIONS ID-1.01a ID-1.02a ID-1.03a unit FLOOR PLAN unit RCP unit DETAILED FLOOR PLANS ID-0.00 ID-0.01 ID-0.02 DRAWING LIST GENERAL NOTES FINISHES SCHEDULE ID-1.21a ID-1.22a ID-1.23a ID-1.24a unit ELEVATIONS unit ELEVATIONS unit MAIN BATH ELEVATIONS unit ENSUITE BATH ELEVATIONS ID-0.03 ID-0.04 ID-0.05 ID-0.06 ID-0.07 LIGHTING SCHEDULE EQUIPMENT SCHEDULE PLUMBING SCHEDULE ACCESSORIES SCHEDULE MILLWORK SCHEDULE ID-1.01b ID-1.02b unit FLOOR PLAN unit RCP ID-0.08 DOOR & DOOR HARDWARE SCHEDULE ID-1.03b unit DETAILED FLOOR PLANS ID-1.21b ID-1.22b unit ELEVATIONS unit MAIN BATH ELEVATIONS drawing list ID-2.01 TYPICAL DOOR AND WINDOW ELEVATIONS ID-3.01 ID-3.02 TYPICAL SECTIONS TYPICAL SECTIONS id 0.00
2 MILLWORK NOTES FINISHES NOTES NOTES GENERAL NOTES 1. ALL WORKS SHALL BE DONE IN ACCORDANCE WITH CURRENT AWMAC SPECIFICATIONS - CUSTOM GRADE. 2. MINIMUM THICKNESS FOR INET COMPONENTS IE. BODY MEMBERS, END GABLES, DIVISIONS, FIXED SHELF, BOTTOMS, TOPS, FACE FRAMES, RAILS, TOE KICKS, INET BASES & FRONTS SHALL BE 3/4". 3. MINIMUM THICKNESS FOR MOUNTING OR HANGER STRIPS, SIDES, BACKS & SUBFRONTS SHALL BE 1/2". 4. MINIMUM THICKNESS FOR BACKS & BOTTOMS SHALL BE 1/4". 5. ELEVATIONS SHOWING INETS ARE FOR FINISH REFERENCE ONLY. REFER TO INET MANUFACTURER'S SHOP DRAWINGS FOR INET SIZES AND CONFIGURATIONS. 6. ALL S SHALL BE MOUNTED ON FULL EXTENSION SOFT CLOSE SLIDES. 7. ALL DOORS SHALL BE MOUNTED ON CONCEALED SELF CLOSING HINGES. MAXIMUM WIDTH FOR SINGLE DOOR SHALL BE 18". LAMINATE DOORS SHALL HAVE MATCHING LAMINATE TO BOTH FACES, AND MATCHING EDGE TAPE TO ALL EDGES. 8. EACH SHALL HAVE A MINIMUM OF 2 CUTLERY S AND ONE POT. 1. BATHROOMS - IN UNITS NOT DOCUMENTED ON ID DRAWINGS WHERE THERE IS ONLY ONE BATHROOM, FINISHES FROM TYPICAL DOCUMENTED ENSUITE SHALL APPLY. 2. WALL TILE - INSTALL BRUSHED CHROME FINISH TILE EDGE (SCHLUTER OR APPROVED ALTERNATE) TO ALL EXPOSED TILE EDGES. APPLY SEALER TO GROUT, STONE AND POROUS TILES, AS PER MANUFACTURER'S RECOMMENDATIONS. 3. FLOOR TILE - INSTALL BRUSHED CHROME FINISH TILE EDGE (SCHLUTER OR APPROVED ALTERNATE) TO ALL EXPOSED TILE EDGES. APPLY SEALER TO GROUT, STONE AND POROUS TILES, AS PER MANUFACTURER'S RECOMMENDATIONS. WHERE FLOOR TILE ABUTS CARPET, INSTALL TILE EDGE TO TILE, AND LATEX SEALER TO CARPET EDGE. FIT CARPET EVENLY AND SECURELY AT TILE EDGE. 4. PAINTING - ALL PAINTING SHALL BE DONE IN ACCORDANCE WITH MASTER PAINTERS SPECIFICATIONS. ALL -PAINT SHALL BE LOW VOC : INTERIOR PAINT - MAX 50 GRAMS PER LITER, EXTERIOR PAINT - MAX 250 GRAMS PER LITER. CEILINGS - ALL CEILINGS SHALL BE FINISHED. 5. CARPET TO BE INSTALLED OVER 3/8" 8 LB. CHIP FOAM UNDERLAYMENT. 1. DO NOT SCALE DRAWINGS 2. THESE DRAWINGS AND SPECIFICATIONS SHALL BE READ IN CONJUNCTION WITH THE DRAWING AND SPECIFICATIONS PREPARED BY THE ARCHITECT, ELECTRICAL CONSULTANT, AND MECHANICAL CONSULTANT. IN CASE OF CONFLICT BETWEEN DRAWINGS, THE DESIGNER SHALL BE NOTIFIED IMMEDIATELY. 3. FLOOR PLANS AND ELEVATIONS SHOWN IN DRAWING PACKAGE ARE TO BE CONSIDERED TYPICAL, AND DETAILS SHALL BE APPLIED TO OTHER SUITE CONFIGURATIONS IN A SIMILAR MANNER. 4. ALL SITE CONDITIONS AND DIMENSIONS ARE TO BE CONFIRMED BY CONTRACTOR. NOTIFY DESIGNER OF ANY DISCREPANCIES PRIOR TO COMMENCING WORK. 5. ALL WORK SHALL BE DONE IN A PROFESSIONAL WORKMANSHIP MANNER IN ACCORDANCE WITH MANUFACTURER'S RECOMMENDATIONS. 6. ALL WORK SHALL BE DONE IN ACCORDANCE WITH THE VANCOUVER BUILDING BYLAW AND ALL OTHER APPLILE REGULATIONS. 7. REFER TO ACCESSORY SCHEDULE AND FLOOR PLANS FOR MOUNTING LOCATIONS OF WASHROOM ACCESSORIES, WINDOW COVERINGS, AND CLOSET ACCESSORIES. 9. CASE INTERIORS SHALL BE WHITE LOW PRESSURE LAMINATE C/W MATCHING EDGE TAPE. ALL SHELVES SHALL BE ADJUSTABLE. 8. PROVIDE ADEQUATE BACKING FOR WALL MOUNTED TELEVISIONS, BATHROOM ACCESSORIES AND CLOSET SYSTEMS WHERE NOTED. 10. INET PULLS SHALL BE MOUNTED AS INDICATED ON ELEVATIONS. 11. ALL BASE, TRIM, CASINGS ETC. SHALL BE PRIMED AND PAINT READY UNLESS OTHERWISE SPECIFIED. 12. ALL SUBSTRATES SHALL BE FORMALDEHYDE FREE. 13. PROVIDE MINIMUM WIDTH FILLER STRIPS TO ENSURE ADEQUATE CLEARANCES OF INET AND EQUIPMENT DOOR SWINGS. WHERE GABLES ARE ADJACENT TO WALLS, PROVIDE MAXIMUM 1" FILLER STRIP. LIGHTING NOTES 1. LIGHTING SPECIFICATION TO BE READ IN CONJUNCTION WITH THE ELECTRICAL CONSULTANTS DRAWINGS. drawing list id 0.01
3 FINISHES SCHEDULE KEY MATERIAL HWF HARDWOOD FLOOR MAIN LEVEL FLOORING SCHEME A MANUFACTURER: DIVINE HARDWOOD PRODUCT #: TERRA COLOUR: CUSTOM WHITE SIZE: 7.5" CONTACT: JUSTIN HUGHES, SCHEME B MANUFACTURER: DIVINE HARDWOOD PRODUCT #: COSMOPOLITAN CHATEAU COLOUR: WHITE OAK, E08003 SIZE: 7.5" CONTACT: JUSTIN HUGHES, INETS & BATHROOMS MANUFACTURER: PENTCO STYLE: FLAT PANEL, FULL WRAP, SQUARE EDGE, 6000 SERIES COLOUR: FROSTY WHITE, 30 DEG. #5 CONTACT: LAURELLE TULLY, MANUFACTURER: PENTCO STYLE: FLAT PANEL, FULL WRAP, SQUARE EDGE COLOUR: RIFT CUT OAK, VERTICAL, GREENLAM CONTACT: LAURELLE TULLY, SOLID SURFACE & ENSUITE COUNTERS MANUFACTURER: CAESARSTONE PRODUCT: QUARTZ PRODUCT CODE: 4030 STONE GREY CONTACT: MERRILL MACFARLANE, MANUFACTURER: CAESARSTONE PRODUCT: QUARTZ PRODUCT CODE: 2141 CONTACT: MERRILL MACFARLANE, T1 PORCELAIN TILE ALL BATHROOM & LAUNDRY FLOORS MANUFACTURER: STONE TILE PRODUCT FORMAT: 12X 24 PRODUCT NAME: HORIZON PRODUCT COLOUR: ANTHRACITE NAT GROUT: MAPEI #93 WARM GREY CONTACT: LUCY BORDIGNON, T2 PORCELAIN TILE MAIN BATH SURROUND MANUFACTURER: CITY TILE PRODUCT FORMAT: 6 X 20 PRODUCT COLOUR: C. WHITE, MATTE GROUT: MAPEI #38 AVALANCHE CONTACT: MARC D'ANDREA, T3 PORCELAIN TILE ENSUITE SURROUND MANUFACTURER: OLYMPIA PRODUCT FORMAT: ECHELON PRODUCT COLOUR: ORIENTAL WHITE GROUT: MAPEI #38 AVALANCHE CONTACT: PAULA NICKERSON, P1 PAINT WALLS MANUFACTURER: SHERWIN WILLIAMS SW 7009, PEARLY WHITE FINISH: EGGSHELL P2 PAINT CEIILING MANUFACTURER:SHERWIN WILLIAMS SW 7009, PEARLY WHITE FINISH: FLAT P3 PAINT DOORS & TRIMS MANUFACTURER: SHERWIN WILLIAMS SW 7009, PEARLY WHITE FINISH: SEMI GLOSS C-1 CARPET BEDROOM FLOORING MANUFACTURER: COLIN CAMPBELL PRODUCT NAME: RIVERS COLOUR: 4338 PRODUCT INFO: WOOL BLEND CONTACT: WENDY MALANIUK, finishes schedule id 0.02
4 LIGHTING SCHEDULE KEY ITEM UNDER INET PUCK LIGHTS SPECIFICATION ALICO ZEE-PUK TRIM COL: WHITE (OR APPROVED EQUAL) MOUNTING SURFACE MOUNTED SURFACE MOUNT MANUFACTURER: TECH LIGHTING MODEL: CIRQUE CEILING FINISH: WHITE /SATIN NICKEL SIZE: 11" DIAM LAMPING: LED SUPPLIER: OCEAN PACIFIC, CEILING SURFACE MOUNTED RECESSED POT LIGHT RECESSED POTLIGHT MANUFACTURER: STANDARD MODEL #: " DOWNLIGHT TRIM: WHITE LAMPING: LED CEILING MOUNTED WET LOCATION RECESSED POT LIGHT RECESSED POTLIGHT MANUFACTURER: STANDARD MODEL #: " DOWNLIGHT TRIM: WHITE LAMPING: LED CEILING MOUNTED MAIN BATH SCONCE MANUFACTURER: TECH LIGHTING MODEL NAME: JAXON BATH MODEL #: 700BCJXN25 FINISH: WHITE/CHROME LAMP: LED V (OR APPROVED EQUAL) SUPPLIER: OCEAN PACIFIC, WALL MOUNTED ISLAND PENDANT MANUFACTURER: TECH LIGHTING MODEL: LUSTRA PENDANT FINISH: SMOKE (WHITE SCHEME) WHITE (BROWN SCHEME) LAMP: LED SUPPLIER: OCEAN PACIFIC, CEILING MOUNTED DINING ROOM ROSETTE CEILING MOUNTED lighting schedule id 0.03
5 EQUIPMENT SCHEDULE KEY E-1 ITEM FRIDGE 30" SPECIFICATION MANUFACTURER: FISHER & PAYKEL MODEL: RF170WDRX5 / RF170WDLX5 SIZE: 31 3/32" W x 27 3/8" D x 67 17/32" H 24" SPECIFICATION MANUFACTURER: BOSCH MODEL: B11CB50SSS SIZE: 24" W x 24" D x 79" H E-2 GAS COOK TOP MANUFACTURER: BOSCH MODEL: NGM5055UC SIZE: H. 31" W x 21 D x 4 H MANUFACTURER: BOSCH MODEL: NGM5455UC SIZE: 23" W x 20" D x 3" H E-3 WALL OVEN MANUFACTURER: BOSCH MODEL: HBL5351UC SIZE: 30 W x 30" D x 24" H MANUFACTURER: BOSCH MODEL: HBE5451UC SIZE: 24" W x 23" D x 23" H E-4 HOODFAN MANUFACTURER: BOSCH MODEL: HUI50351UC SIZE: 30" W x 11" D E-4a UNIT CANNOT FIT AN UNCOUNTER MICROWAVE: MANUFACTURER: BOSCH MODEL: HMV3053C SIZE: 30" W x 15" D x 16" H E-5 DISHWASHER MANUFACTURER: BOSCH MODEL: SHV4ATB3UC FINISH: INTEGRATED SIZE: 24" W x 34" H E-4b UNIT CAN FIT AN UNCOUNTER MICROWAVE: MANUFACTURER: BOSCH MODEL: HUI54451UC SIZE: 24" W x 11" D E-6 MICROWAVE MANUFACTURER: PANASONIC MODEL: NNSD765S TRIM: NNTK714SS SIZE: 22" W x 20" D x 12" H UNITS THAT CAN FIT UNDERCOUNTER MICROWAVE WILL VARY. SEE ARCHITECURALS FOR DETAILS. E-7 WASHER/DRYER MANUFACTURER: WHIRLPOOL MODEL: WFW7590FW & YWED75HEFW SIZE: WASHER - 27" W x 31-1/2" D x 39-3/4" H DRYER - 27" W x 31" D x 39" H MANUFACTURER: WHIRLPOOL MODEL: WFW5090GW & YWED7500VW SIZE: WASHER - 24" W x 25-1/8" D x 33-1/4" H DRYER - 24" W x 23-1/4" D x 33-1/4" H equipment schedule id 0.04
6 PLUMBING SCHEDULE KEY P-1 ITEM SINK SPECIFICATION MANUFACTURER: SONETTEO STYLE: DOUBLE BOWL UNDERMOUNT MODEL NAME: 1000 SERIES, UNDERMOUNT MODEL#: S1063U SIZE: 31.25" X 18" X 8" FINISH: STAINLESS STEEL CONTACT: KATRINA PERALTA, (604) SINK WITH 24" APPLIANCES MANUFACTURER: SONETTEO STYLE: SINGLE BOWL UNDERMOUNT MODEL NAME: 1000 SERIES, UNDERMOUNT MODEL#: S1050U SIZE: 19 1/4" X 18" X 8" FINISH: STAINLESS STEEL P-2 FAUCET MANUFACTURER: GROHE MODEL NAME: MINTA PULL OUT FAUCET MODEL#: SIZE: 13"H FINISH: POLISHED CHROME CONTACT: KATRINA PERALTA, (604) P-3 P-4 FAUCET ALL BATHROOMS TOILET ALL BATHROOMS MANUFACTURER: GROHE STYLE: SINGLE CONTROL MODEL NAME: ESSENCE MODEL #: SIZE: 9" FINISH: POLISHED CHROME CONTACT: KATRINA PERALTA, (604) MANUFACTURER: DURAVIT MODEL NAME: TWO PIECE, DUAL FLUSH TOILET MODEL#: FINISH: WHITE CONTACT: KATRINA PERALTA, (604) P-5 TUB MANUFACTURER: MIROLIN MODEL NAME: PHOENIX SKIRTED MODEL #: PA6030R SIZE: 60" X 30" FINISH: WHITE CONTACT: KATRINA PERALTA, (604) P-6 SINK MAIN & ENSUITE MANUFACTURER: CHELINI STYLE: UNDERMOUNT MODEL NAME: RECTANGLE BASIN MODEL #:UL2014 SIZE: 20" X 14" X 8" FINISH: WHITE CONTACT: KATRINA PERALTA, (604) P-7 P-8 SHOWER BASE SHOWER COMBINATION MANUFACTURER: MIROLIN MODEL NAME: STRADA MODEL #: SB6030LA SIZE: 60" X 30" FINISH: WHITE CONTACT: KATRINA PERALTA, (604) MANUFACTURER: GROHE MODEL NAME: ESSENCE PRESSURE BALANCING VALVE#: PRESSURE BALANCE ROUGH IN #: SHOWER ARM#: SHOWER HEAD#: EUPHORIA COSMOPOLITAN FINISH: POLISHED CHROME CONTACT: KATRINA PERALTA, (604) P-9 TUB/SHOWER COMBO TRIM KIT MANUFACTURER: GROHE MODEL NAME: ESSENCE DIVERTER MODEL#: PRESSURE BALANCING VALVE#: SHOWER ARM#: SHOWER HEAD#: EUPHORIA COSMOPOLITAN TUB SPOUT #: CONCETTO FINISH: POLISHED CHROME CONTACT: KATRINA PERALTA, (604) * WHEN BATHROOM HAS SEPARATE SHOWER AND TUB, NO SHOWER HEAD REQUIRED AT TUB - SEE ELEVATIONS FOR DETAILS* plumbing schedule id 0.05
7 ACCESSORIES SCHEDULE KEY AC-1 ITEM 24" TOWEL BAR SPECIFICATION MANUFACTURER: KARTNERS STYLE: OSLO MODEL #: FINISH: CHROME CONTACT: MARK FIENDELL, MOUNTING WALL MOUNT AT 48" A.F.F. SEE FLOOR PLAN FOR LOCATIONS. AC-2 ROBE HOOK ROBE HOOK MANUFACTURER: KARTNERS STYLE: OSLO MODEL #: FINISH: CHROME CONTACT: MARK FIENDELL, DOOR MOUNT AT 60" A.F.F. SEE FLOOR PLAN FOR LOCATIONS. AC-3 TOILET ROLL HOLDER MANUFACTURER: KARTNERS STYLE: OSLO MODEL #: FINISH: CHROME CONTACT: MARK FIENDELL, INET MOUNT, TYPICAL AT 28" A.F.F. TO THE TOP OF ROLL HOLDER. LEADING EDGE TO BE 1-1/2" BACK FROM FRONT EDGE OF INET. AC-4 SHOWER ROD MANUFACTURER: KARTNERS STYLE: 5' SHOWER ROD MODEL#: KSR-SQ-5SS FINISH: POLISHED CHROME CONTACT: MARK FIENDELL, FIT TO TILED 6'-6" A.F.F. AC-5 SHOWER DOOR MANUFACTURER: MAAX STYLE: FRAMELESS MODEL: KLEARA 2 PANEL AC-6 CLOSET HANG BARS MANUFACTURER: RUBBERMAID OR APPROVED EQUAL STYLE: 16" FREESLIDE SHELVING FINISH: WHITE AC-7 CLOSET HANG BARS MANUFACTURER: RUBBERMAID OR APPROVED EQUAL STYLE: 16" LINEN SHELVING FINISH: 16" 29" 42" 55" 68" AFF. AC-8 ROLLER SHADES AS PER CLIENT SPEC accessories schedule id 0.06
8 MILLWORK SCHEDULE ITEM UPPER & LOWER INETS SPECIFICATIONS DOOR STYLE: FLAT PANEL KEY NOTES COUNTER TOP PROFILE: 1-1/4" THICK, SQUARE EDGE COUNTERTOP TO BE 1/2" PROUD OF INET FRONTS INET PULLS UPPERS: 1" OVERHANG LOWERS: RICHELEIU EDGE PULL, # LENGTH: 80 MM POLISHED CHROME LOWER INETS & S ONLY CENTERED ON TOP HORIZONTAL EDGE OF INET DOORS ITEM SPECIFICATIONS KEY ENSUITE INETS DOOR STYLE: FLAT PANEL ENSUITE COUNTER TOP PROFILE: 1-1/4" THICK, SQUARE EDGE COUNTERTOP TO BE 1/2" PROUD OF INET FRONTS ENSUITE INET PULLS LOWERS: RICHELEIU EDGE PULL, # LENGTH: 80 MM POLISHED CHROME LOWER INETS & S ONLY CENTERED ON TOP HORIZONTAL EDGE OF INET DOORS ITEM SPECIFICATIONS KEY MAIN BATH INETS DOOR STYLE: FLAT PANEL VERTICAL GRAIN DIRECTION MAIN BATH COUNTER TOP PROFILE: 1-1/4" THICK, SQUARE EDGE COUNTERTOP TO BE 1/2" PROUD OF INET FRONTS ST2 MAIN BATH INET PULLS LOWERS: RICHELEIU EDGE PULL, # LENGTH: 80 MM POLISHED CHROME LOWER INETS & S ONLY CENTERED ON TOP HORIZONTAL EDGE OF INET DOORS millwork schedule id 0.07
9 DOOR AND DOOR HARDWARE SCHEDULE ITEM SWING DOOR DOOR PROFILE MANUFACTURER: MASONITE, SLAB, PAINT GRADE *HOLLOW CORE DOORS THROUGHOUT EXCEPT BEDROOMS & BATHROOMS TO BE SOLID CORE HARDWARE SUPPLIER: TAYMOR STYLE: BERGEN FINISH: POLISHED CHROME GLEN SONDERGAARD, (604) Ext. 264 NOTES PRIVACY SET FOR BATHROOMS PASSAGE FOR BEDROOMS AND STORAGE BI-FOLD DOOR MANUFACTURER: MASONITE, SLAB, PAINT GRADE HOLLOW CORE RICHELIEU RECESSED PULL MODEL #: FINISH: POLISHED CHROME POCKET DOOR MANUFACTURER: MASONITE, SLAB, PAINT GRADE HOLLOW CORE RICHELIEU RECESSED PULL MODEL #: FINISH: POLISHED CHROME POCKET DOOR NOTE: PROVIDE PRIVACY SETS FOR MASTER BEDROOM AND ALL BATHROOMS. ALL OTHER SWING DOORS TO RECEIVE PASSAGE SET. SEE COMMON AREA PACKAGE FOR SUITE ENTRY DOOR AND DOOR HARDWARE MANUFACTURER: TAYMOR MODEL: HINGE PIN DOOR STOP25-D24614SC FINISH: CHROME door schedule id 0.08
10 K-T PURIST FAUCETS BRASS K-T PURIST FAUCETS BRASS P5 1.03a P4 1.03a AC-6 AC-8 W.I.C. 410 AC-6 ENSUITE 411 MASTER 409 ENTRY 401 E LAUNDRY 402 E-7 BATH E P2 1.03a AC-6 AC-6 STORAGE 405 BEDROOM 403 BEDROOM 404 LIVING 406 AC-8 E AC-8 AC-8 DINING 407 AC-8 unit 401 floor plan unit plan scale: 1/4" = 1'-0" P1 - id 1.01a DRAWING NORTH
11 W.I.C. 410 ENTRY 401 ENSUITE 411 MASTER 409 LAUNDRY 402 BATH STORAGE 405 BEDROOM 403 BEDROOM 404 LIVING 406 DINING 407 unit 401 rcp unit rcp scale: 1/4" = 1'-0" P2 - id 1.02a DRAWING NORTH
12 K-T PURIST FAUCETS BRASS PURIST FAUCETS BRASS K-T P9 AC4 P5 AC1 E7 1.23a E6 1.23a E5 1.23a AC3 P4 AC2 BATH 412 P6 P3 unit main bath - plan P5 1.01a P3 E-2 P4 P6 P6 E-1 E-3 E-4 AC5 AC1 AC3 E9 1.24a E8 1.24a E a ENSUITE 411 AC2 E1 1.21a E2 1.21a P2 408 P8 P7 P5 P9 E-5 P1 E-6 E4 1.22a unit 401 detailed floor plans unit ensuite bath - plan P4 1.01a E3 1.22a unit kitchen - plan P3 1.01a id 1.03a DRAWING NORTH
13 COUNTER DEPTH INET W/ TOUCH LATCH HARDWARE OVER FRIDGE S INETS ABOVE HOOD FAN TO HAVE TOUCH LATCH HARDWARE 1/2" REVEAL 9'-0"+/- 3'-0" 2'-0" 3'-0" 1" GABLE.33mm THICK SHEET METAL B/W HOOD FAN AND INET REQ. FOR CODE CLEARANCE UNDER INET LIGHTING, TYP. 1 2 " KICK TO MATCH INET DOOR CONFIRM EQ. DIM AND ADEQUATE CLEARANCE FOR DOOR SWING kitchen - elevation E1 1.03a OPEN TO LIVING 4'-6" 9'-0"+/- 5'-6" MICROWAVE unit 401 kitchen elevations KICK TO MATCH INET DOOR kitchen - elevation E2 1.03a id 1.21a
14 OPEN TO 4'-6" 9'-0"+/- 3'-0" kitchen - elevation E3 1.03a 3'-0" 3'-0" 1'-0" unit 401 kitchen elevations kitchen - elevation E4 1.03a id 1.22a
15 INSTALL EDGE STRIP TO EXPOSED EDGE OF TILE, TYP. EXTEND TILE 2" BEYOND FACE OF TUB SHOWER ROD EQ. EQ. SHOWER ROD S VANITY LIGHT CENTERED ON MIRROR TUB T2 FULL TILE FULL TILE 7'-6" 3'-7" FULL TILE T2 FULL TILE TUB 7'-6" T2 FULL TILE TUB FULL TILE 1 2 " " 6mm MIRROR, WITH POLISHED EDGES U- SHAPED 4" EQ. EQ. 2'-10" 4" 3'-5" KICK TO MATCH INET unit 401 main bath elevations main bath - elevation E7 1.03a main bath - elevation E6 1.03a main bath - elevation E5 1.03a id 1.23a
16 MODELNUMBER TRADENAME MATERIAL PRODUCT S INSTALL EDGE STRIP TO EXPOSED EDGE OF TILE, TYP. EXTEND TILE 2" BEYOND FACE OF SHOWER PAN 6MM CLEAR SILVER MIRROR, POLISHED EDGES T3 UPPER S TO HAVE CUT OUT FOR P-TRAP KICK TO MATCH INET SHOWER ensuite bath - elevation E8 1.03a ensuite bath - elevation E9 1.03a T3 T3 FRAMELESS 8MM GLASS SHOWER DOOR 6'-6" 7'-6" 2'-0" TUB 3'-6" unit 401 main bath elevations SHOWER ensuite bath - elevation E a id 1.24a
17 K-T PURIST FAUCETS BRASS P3 1.03b ENTRY 301 STORAGE LAUNDRY 306 E E sim. sim. BATH 305 P4 1.03b LIVING 303 AC-6 AC-8 BEDROOM 304 BALCONY - AC-8 E sim. unit 302 floor plan unit floor - plan scale: 1/4" = 1'-0" P1 - id 1.01b DRAWING NORTH
18 ENTRY 301 STORAGE LAUNDRY 306 BATH LIGHTS REMOVED LIVING 303 BEDROOM 304 BALCONY - unit 302 rcp unit rcp scale: 1/4" = 1'-0" P2 - id 1.02b DRAWING NORTH
19 K-T PURIST FAUCETS BRASS E-1 E2 1.21b E1 1.21b E-2 E-3 E-4a 302 P4 P6 P3 AC2 AC3 AC1 E-5 BATH 305 E6 1.23b E8 1.23b E7 1.23b AC4 P2 P9 P5 P1 unit kitchen - plan P3 1.01b unit main bath - plan P4 1.01b unit 302 detailed floor plans DRAWING NORTH id 1.03b
20 S SIM. BULKHEAD 1/2" REVEAL COUNTER DEPTH INET W/ TOUCH LATCH HARDWARE OVER FRIDGE BULKHEAD 1/2" REVEAL INETS ABOVE HOOD FAN TO HAVE TOUCH LATCH HARDWARE 9'-0"+/- 9'-0"+/- UNDER INET LIGHTING, TYP. 3'-0" 2'-0" 3'-0" OVEN unit 302 kitchen elevations CONFIRM EQ. DIM AND ADEQUATE CLEARANCE FOR DOOR SWING 2'-0" 2'-0" 1'-6" KICK TO MATCH INET 2'-0" 1'-8" kitchen - elevation E2 1.03b kitchen - elevation E1 1.03b id 1.21b
21 INSTALL EDGE STRIP TO EXPOSED EDGE OF TILE, TYP. EXTEND TILE 2" BEYOND FACE OF TUB SHOWER ROD S VANITY LIGHT CENTERED ON MIRROR T3 TUB 3'-7" 6'-5" TUB T3 FULL TILE FULL TILE 7'-6" 1 2 " 6mm MIRROR, WITH POLISHED EDGES U-SHAPED EQ. EQ. 2'-10" 4" 3'-5" unit 302 main bath elevations 4" " KICK TO MATCH main bath - elevation E8 1.03b main bath - elevation E7 1.03b main bath - elevation E6 1.03b id 1.22b
22 INSTALL EDGE STRIP TO EXPOSED EDGE OF TILE, TYP. EXTEND TILE 2" BEYOND FACE OF TUB SHOWER ROD S VANITY LIGHT CENTERED ON MIRROR T3 TUB 3'-7" 6'-5" TUB T3 FULL TILE FULL TILE 7'-6" 1 2 " 6mm MIRROR, WITH POLISHED EDGES U-SHAPED EQ. EQ. 2'-10" 4" 3'-5" unit 302 main bath elevations 4" " KICK TO MATCH main bath - elevation E8 1.03b main bath - elevation E7 1.03b main bath - elevation E6 1.03b id 1.22b
23 Item_Description Manufacturer Part_Number Quantity-Imperial Unit-Imperial Quantity-Metric Unit-Metric ID-CSI_Masterformat ID-CSI_Uniformat ID-CI_SfB ID-UniClass ID-User_Defined Item_Short_Name P-1 DRYWALL RETURN P-1 WINDOW AS PER ARCHITECT 1 1/4" " P-3 FLAT STOCK MDF SILL WITH SQUARE EDGE 1/2" x 4" MDF FLAT STOCK BAS P-3 typical window - elevation E3 1.01a P-1 P-1 P-3 P-3 1/2" x 2.5" MDF FLAT STOCK HEAD CASING 1/2" x 2.5" MDF FLAT STOCK HEAD CASING P-3 1/2" x 2.5" MDF FLAT STOCK JAMB CASING P-3 1/2" x 2.5" MDF FLAT STOCK JAMB CASING P-3 P-3 1/2" x 4" MDF FLAT STOCK P-3 1/2" x 4" MDF FLAT STOCK P-3 typical door & window elevations typical bi-fold door - elevation E2 1.01a typical swing door - elevation E1 1.01a id 2.01
24 1 1/4" 1'-0" 2" BULK HEAD ADJUSTABLE SHELF ON PIN SUPPORTS, TYP. INET DOOR, TYP. 3'-0" 1" DOOR EXTENSION UNDER INET LIGHTING 1'-8" 9'-0" 2cm STONE SPLASH 3 cm THICK STONE COUNTERTOP. 1/2" OVERHANG 3'-0" 3" 4" 1'-2"± EQ. EQ. INET PULL KICK TO MATCH INETS, TYP. typical sections kitchen - section scale: 1" = 1'-0" S1 1.21a id 3.01
25 DROPPED CEILING DROPPED CEILING VANITY WALL SCONCE 3'-0" 3'-5" FLOATING 6MM MIRROR WITH POLISHED EDGES ON 3/4" MDF SET IN 4" ON ALL SIDES 8'-0" 3cm THICK STONE COUNTERTOP. 4" 8'-0" 4" FLOATING 6MM MIRROR WITH POLISHED EDGES ON 3/4" MDF SET IN 4" ON ALL SIDES 10" 2cm 1 1/2" THICK THICK STONE COUNTERTOP. 3cm 1 1/2" THICK THICK STONE COUNTERTOP. 2cm 1 1/2" THICK THICK STONE COUNTERTOP. EQ. EQ. TOP TO BE CONSTRUCTED WITH CUT OUT TO ALLOW FOR DRAIN TOP TO BE CONSTRUCTED WITH CUT OUT TO ALLOW FOR DRAIN 2'-10" EQ. 2'-10" EQ. 4" 5" 4" typical sections 8" RECESSED KICK TO MATCH 8" RECESSED KICK TO MATCH ensuite bath - section scale: 1" = 1'-0" S3 1.24a main bath - section scale: 1" = 1'-0" S2 1.23a id 3.02
SCHEDULE OF MATERIALS - SPRINGTOWN UNITS
Appliances AP-200 Kitchen Refrigerator Whirlpool WRT549SZDM Stainless Steel 29"W x 34.5"D x 65-7/8"H MSRP $999.00 AP-201 Kitchen Dishwasher Whirlpool WDF320PADS Stainless Steel 23-7/8"W x 24.5"D x 34.5"H
SECOND FLOOR 960 sq. ft.
Great Room 13'3" x 12'3" Flex Room 8'6" x 7'10" Bedroom 2 10'4" x 11'5" Nook 10'2" x 9'6" Bedroom 3 10'4" x 10'11" W D Laundry Mudroom DW 11'5" x 15'0" Half Ensuite Linen FRONT GARAGE DUPLEX BATHROOMS
VISTA DEL PARAISO LOT 7 SPEC BY:
VISTA DEL PARAISO LOT 7 SPEC BY: CYBER SPACE WHISPER GRAY POUROUS STONE BRICK BODY COLOR: DE6220 POUROUS STONE TRIM: DEC785 WHISPER GRAY(WOOD FACIA, WINDOW SURROUND, BELLY BAND) FRONT DOOR: SW7076 CYBERSPACE
Inclusions Brochure Stages 3 and 4
Modern Exteriors Stylish Kitchens Designer Bathrooms Fixtures & Finishes Schedule Inclusions Brochure Stages 3 and 4 W EL L A PP O IN T ED Modern Exteriors 1. 4. 3. 2. 6. 5. 7. 9. 8. House Design Capri.
SECOND FLOOR 1159 sq. ft.
Nook 9'11" x 11'11" Great Room 12'11" x 11'11" Walk-in Closet Master 12'5" x 12'11" Half room Walk-in Closet Shelves Foyer Linen onus Room 13'5" x 12'11" D W FRONT GARAGE HOME TWO STOREY ATHROOMS 2.5 EDROOMS
EXCEL HOMES GARNET MAIN FLOOR OPTIONS KITCHEN OPTION LOCATION OVERVIEW. excelhomes.ca
Zero lot line home requires window to be removed. #10901 Half Mudroom Nook 12'11" x 9'11" 14'3" x 14'11" Foyer Zero lot line home requires window to be removed. #10901 Walk-in Closet Master edroom 15'11"
16 JUL 2013 Project #:
Issue Date: 16 JUL 2013 Revision Date 16 JAN 2014 AREAS 5023 Washington Ave., Houston TX 77007 (P)713-868-7226 Entry Coat Closet Kitchen Dining Living Powder Room Patio Bedroom 2 Bedroom 2 Closet Bath
B L A C K B U R N R O W
B L A C K B U R N R O W SELECTIONS MANUAL INTERIOR TRIM DETAILS BASE MOLDING WHITE DOVE - SIZE: 1X10 COLOR: WHITE DOVE BENJAMIN MOORE OC-17 INSPIRATION TO SHOW PROFILE/SHADOW LINES OF TOP PORTION OF BASE.
CHOLLA LOT 2 SPEC BY:
CHOLLA LOT 2 SPEC BY: SUNRISE CEDAR PRECIOUS PEARLS INDIAN RIVER BARNWOOD OLD BARNWOOD KENSINGTON BLUE BODY COLOR: BM 985 INDIAN RIVER TRIM: DEW386 PRECIOUS PEARLS BELLY BAND: BM CSP-115 BARNWOOD FRONT
CHOLLA LOT SPEC BY:
CHOLLA LOT 3 2515 SPEC BY: GUNMETAL CITY LOFT DOVETAIL BODY COLOR: SW7631 CITY LOFT BODY COLOR 2: SW7018 DOVETAIL (BELOW BELLY BAND) TRIM: BM1602 GUNMETAL (WOOD FACIA, WINDOW SURROUND, BELLY BAND) FRONT
SECOND FLOOR 1353 sq. ft.
Master edroom 12'4" x 13'3" Nook 13'5" x 9'5" Great Room 13'5" x 12'11" Walk-in Closet W D Laundry edroom 4 9'11" x 10'2" FRONT GRGE HOME Pantry Mudroom Half Flex Room 10'11" x 10'2" Foyer 12'4" x 13'9"
UNIT A 879 SQ. FT. FLOORS 1 TO 4 REVERSE 879 SQ. FT. FLOORS 1 TO SQ. FT.
UNIT A 879 SQ. FT. 879 SQ. FT. REVERSE 879 SQ. FT. THE DEVELOPER AND BUILDER RESERVE THE RIGHT TO MAKE MODIFICATIONS AND CHANGES TO THE BUILDING, ANY UNIT, PARKING AREA AND STORAGE AREA DESIGN, SPECIFICATIONS,
FLOOR PLAN FLOOR PLAN: UNIT B. Unit B. First Floor. 2 Bed / 2 Bath 1,310 sf + 68 sf balcony
FINISHES The floor plans, elevations, renderings, scale, features, finishes and specifications are subject to change at any time. They should not be relied upon as representations, expressed or implied.
www.mountaincovehomes.com HOME FEATURES STRUCTURAL ELEMENTS Reinforced concrete monolithic foundation slab Concrete masonry block exterior walls Professionally engineered roof and floor trusses with hurricane
LIGHTING & PLUMBING SELECTIONS
LIGHTING & PLUMBING SELECTIONS Presentation Disclaimer: Due to limitations of digital imagery, and the relative inconsistencies of various monitor displays, the colors you see on screen may not be an accurate
VISTA DEL PARAISO 2515 LOT 2 SPEC SPEC BY:
VISTA DEL PARAISO 2515 LOT 2 SPEC SPEC BY: GUNMETAL AESTETIC WHITE GUNMETAL REVERE PEWTER BRICK: n/a BODY COLOR: BM HC-172 REVERE PEWTER BODY COLOR 2: BM 1602 GUNMETAL (BELOW BELLY BAND) TRIM: BM 1602
CHARLESTON. excelhomes.ca IN MAHOGANY FRONT DRIVE HOME. 3 Bedrooms 21/2 Baths Two Storey 2354 sq. ft. finished sq. ft. unfinished basement
FRONT DRIVE HOME HRLESTON IN MHOGNY Last updated on September 3, 2015 3 edrooms 21/2 aths Two Storey 2354 sq. ft. finished + 696 sq. ft. unfinished basement Main Floor 1053 sq. ft. Second Floor 1301 sq.
2018 OPTIONS.
2018 OPTIONS www.atlantichomesofpa.com 1 EXTERIOR DOORS MODULAR OVAL DOOR 1 OR 2 SIDELITES NO STORM MOD SWINGING PATIO DOOR DYNASTY DOOR STANDARD AND MODULAR WITH SIDELITES 9 LITE DOOR NO STORM SUNBURST
Punch List Checklist EXTERIOR LANDSCAPING. COMMON LIVING SPACES and HALLS
EXTERIOR o Exterior body paint touch up complete o Fascia and eves termite damage repaired o Fascia and eves paint touch up complete o Fence gates open and close properly without sticking or rubbing o
Manchester 3 Bed / 2½ Bath / 3-Car Garage / 2,107-2,191 Sq. Ft. Bristol at Whitney Ranch ELEVATION C PRELIMINARY
Manchester 3 Bed / 2½ Bath / 3-Car Garage / 2,107-2,191 Sq. Ft. Bristol at Whitney Ranch ELEVATION A ELEVATION B ELEVATION C Offer void where prohibited or otherwise restricted by law. All information
222 Edgewood Crescent (Strata Lot 48) The Sequoia. 226 Edgewood Crescent (Strata Lot 49) The Douglas
Upcoming 222 Edgewood Crescent (Strata Lot 48) The Sequoia 226 Edgewood Crescent (Strata Lot 49) The Douglas 243 Edgewood Crescent (Strata Lot 57) The Douglas Pending 254 Edgewood Crescent (Strata Lot
Living/ Dining Areas. Kitchen. Bedrooms. Bathroom
Living/ Dining Areas alls loors Ceiling Lighting Additions alls loors Ceiling Cupboards Benchtop Mixer Tap ink Dishwasher Oven Cooktop Additions Bedrooms alls loors Ceiling ardrobes Lighting Additions
in Midtown EXCEL HOMES LOCKEPORT SECOND FLOOR 762 sq. ft. MAIN FLOOR 762 sq. ft. LANED DUPLEX TWO STOREY excelhomes.ca Nook 12'11" x 9'0"
Nook 12'11" x 9'0" Bedroom 2 9'4" x 9'10" Bedroom 3 9'4" x 9'8" Half DW 12'11" x 13'6" 12'0" x 13'0" Down Up Laundry W D Down BATHROOMS 2.5 BEDROOMS 3 LANED DUPLEX TWO STOREY FINISHED SQ. FT. 1524 DEVELOPED
SECOND FLOOR 832 sq. ft.
Mudroom 13'0" x 11'6" DW Bedroom 3 9'4" x 10'9" Bedroom 2 9'4" x 10'3" Laundry W D 10'3" x 15'10" Nook 10'3" x 11'3" Pocket Office Linen BATHROOMS 2.5 BEDROOMS 3 LANED DUPLEX TWO STOREY FINISHED SQ. FT.
ID0.1 PALO VERDE 8000 WEST US HIGHWAY 290 AUSTIN, TX SHEET INDEX: CONTACT INFORMATION: DISCLOSURES: DOCUMENT GENERAL NOTES:
CONTACT INFORMATION: SHEET INDEX: DISCLOSURES: DOCUMENT GENERAL NOTES: CLIENT ARDENT RESIDENTIAL 5453 BURNET RD. SUITE 203 AUSTIN, TX 78756 ARCHITECT DAVIES COLLABORATIVE 5453 BURNET RD. SUITE 202 AUSTIN,
Pr o m i s e s o f a s e d u c t i v e l i f e s t y l e o n t h e b e s t i s l a n d i n t h e w o r l d We l c o m e t o Pa c i f i c a.
P a c i f ic a Pr o m i s e s o f a s e d u c t i v e l i f e s t y l e o n t h e b e s t i s l a n d i n t h e w o r l d We l c o m e t o Pa c i f i c a. E v e r y b o d y h a s t h e i r o w n v e r
Custom Apartment. - Choices -
Custom Apartment - Choices - Levers A: Kwikset 154HL Veteran Bronze finish B: Delaney-Contemporary Collection Cira Polished Chrome C. Ultra Security Wave Lever Veterian Bronze D. Ultra Security Wave Lever
SINGLE SECTION HOMES NORTHWOOD SERIES
1 SINGLE SECTION HOMES NORTHWOOD SERIES ABOUT US Redman Homes is one of the oldest and most respected homebuilders in America. Founded in 1937, Redman pioneered factory home construction and continues
Richland Ranch Homes. Homes Worth Looking Into!
2015 1 Richland Ranch Homes Homes Worth Looking Into! www.commodore-pennsylvania.com Table of Contents Pg Model Size Sq. Ft. 4 GF729A 2848 1280 4 GF706A 2848 1198 5 GF726A 2848 1280 5 GF774A 2840/60 1309
DESIGN GUIDE DESIGN GUIDE
DESIGN GUIDE DESIGN GUIDE easy as Visit our website to find out more about us! How to Remodel your Kitchen or Bathroom How to Remodel your Kitchen or Bathroom Step 1: PLAN Establish a time frame. Ask your
Built to Benchmark Specifica ons.
Decora ve rectangle vent in large gable Eave returns as shown Shingle through in large gable Board & Ba en siding on front eleva on and large gable as shown 4-over-1 window grids throughout 3 pairs of
City Line Terraces. Color Package #1. Wall Paint. Bath #1. Kitchen. Optional Fireplace. Master Bath Utility Floor Bath #2. White Oak Hardwood SW7567
SW7567 Natural Tan City Line Terraces Color Package #1 Wall Paint White Oak Hardwood Winter Quartz Countertop SW7008 Alabaster Wall Cabinets SW7548 Portico Island Powder Floor & Optional Wall Kitchen Bath
ALREADY YOURS DESIGNER INCLUSIONS
ALREADY YOURS DESIGNER INCLUSIONS THERE'S NOTHING BASIC ABOUT A Brighton Beginning YOU MIGHT BE SURPRISED HOW MUCH GOES INTO A HOME. Inside and out, floor to ceiling, wall to wall. We ve thought of (and
Kevin O'Connor Design Kevin O'Connor CKD, CBD, CID
SCOPE OF LABOR GENERAL: SUPPLY AND MANAGE TRASH AND DAILY CLEAN UP PROTECT EXISTING WOOD FLOORING, STAIRS AND DOORWAYS SUPPLY AND MAINTAIN PORTABLE TOILET FOR DURATION OF PROJECT KITCHEN: DEMO EXISTING
C o m m u n i t y A m e n i t i e s I n t e r i o r A m e n i t i e s
Community Amenities + + Resort-style swimming pool with expansive tanning area + + Relaxation courtyard with water features and ornate landscaping + + Built-in premium outdoor grills + + Fully-equipped
Plan 1 3 Bed / 2½ Bath / 3-Car Garage / 2,107-2,191 Sq. Ft.
Plan 1 3 Bed / 2½ Bath / 3-Car Garage / 2,107-2,191 Sq. Ft. ELEVATION A ELEVATION B ELEVATION C community development plans) is not guaranteed and remains subject to change or delay without notice. Maps
THE TOWNHOMES OF VAN AKEN
A SUSTAINABLE SHAKER HEIGHTS COMMUNITY DEVELOPMENT featuring 10 year tax abatement NORTHEAST OHIO S PREMIER RESIDENTIAL DEVELOPER IS AN UPSCALE URBAN DEVELOPMENT settled on the crescent site of Van Aken
A. It is preferred that all submittals to be submitted electronically in PDF format.
June 20 2013, Rev 00 10 2800 Toilet, Bath, and Laundry Accessories PART 1. GENERAL 1.01 This Section includes: A. Toilet room accessories: 1.02 Submittals 1. Grab bars 2. Metal framed mirrors 3. Sanitary
Design Planner Fax
Design Planner Fax 866.711.0065 cdsmail@norcraftcompanies.com Date HOMEOWNER INFORMATION Name Phone Email CONTACT INFORMATION Account number Designer name Fax number Phone ext Email ROOM SELECTION Kitchen
Residence 1 2 BED / 2.5 BATH / APPROX. 1,122 SQ. FT.
Elevations All information (including, but not limited to prices, views, availability, incentives, floor plans, site plans, features, standards and options, assessments and fees, planned amenities, programs,
How-to-Measure Guide. for Kitchens & Baths
How-to-Measure Guide for Kitchens & Baths 1 1 The following step-by-step instructions will make measuring for your new project a snap! All that s required is paper, pencil and a tape measure. Accuracy
36 Sample Road, County/City, Post Code
36 Sample Road, County/City, Post Code Inspected by: Inventory Giant Date of Inspection: 00/00/0000 Prepared By: IG Clerk Prepared for: Estate Agent/Landlord Tenant: Mr John Doe Refers to: n/a Date Published:
Addendum. Windsor Hall Renovations Date: October 12, 2017 Addendum No: 3 GENERAL. 1! Addendum #4 will be issued 2:00 PM Tuesday October 17, 2017.
!!! Addendum EXP Project No: MTA Project No: WIND-17-01 Project: Windsor Hall Renovations October 12, 2017 Addendum No: 3 The following information supplements and/or supersedes the bid documents. This
Tender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Finish carpentry items including shop prefabricated casework and countertops..2 Hardware and attachment accessories..3 Wood Benches..4
AN IDEA SO SIMPLE, IT S A WONDER OTHERS HAVEN T THOUGHT OF IT SOONER.
AN IDEA SO SIMPLE, IT S A WONDER OTHERS HAVEN T THOUGHT OF IT SOONER. Architectural design from the inside out. Making interior spaces work to the benefit of residents who live there. Then, and only then,
INCLUDED FEATURES Avalon Circle, Naples, FL Avalon-Naples.com
INCLUDED FEATURES COMMUNITY FEATURES Minutes from downtown Naples Convenient to area beaches, world-class shopping and dining at Mercato, Tin City, Fifth Avenue South, Third Street South, Waterside Shops;
SCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
Ordering Guide. v1.7. Measuring, Style Selection and Options Guide. See us online at: Facebook.com/TerillianCabinets
Ordering Guide v1.7 Measuring, Style Selection and Options Guide See us online at: TerillianCabinets.com Facebook.com/TerillianCabinets Contact us: Sales@TerillianCabinets.com Contents Step 1. Measure
Catalina. Single Towel Bar 18 DYN DYN DYN Double Towel Bar DYN /2 Diameter Towel Ring DYN-2311
Catalina Available in the following finishes: PB Polished Brass SN Satin Nickel CM Polished Chrome The Catalina collection by Dynasty features a bold design and bright finishes that add wonderful accents
Kitchen & Bath Cabinetry Laser Measuring Guide
SEMI-CUSTOM Kitchen & Bath Cabinetry Laser Measuring Guide Dear Member, Thank you for selecting All Wood Cabinetry for your project. This package details the information our professional design staff will
Simple Affordable UPGRADE OPTIONS
UPGRADE OPTIONS Simple Affordable Our upgrades packages are designed to offer maximum flexibility and value. Bundled in manageable packages, we leave the option up to you to decide which areas of your
Chapter 22 - Cabinets & Vanities
Chapter 22 - Cabinets & Vanities Contents Chapter 22 - Cabinets & Vanities... 22-1 Timing & Prerequisites... 22-2 Cabinets... 22-3 Cabinet Layout... 22-3 Wall Cabinets... 22-4 Assemble the Wall Units...
SECTION CUSTOM CABINETS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Preparation for installing utilities. 1.02 RELATED REQUIREMENTS SECTION 06410 - A. Section
STONEWOOD. NEW Colours for 2017! CANADA S. 100 s of colour combinations B A T H C A B IN E T R Y. Mix & Match EASY ORDERING
Q U A L I T Y STYLE C R A F T S M A N S H I P VA L U E STONEWOOD B A T H C A B IN E T R Y NEW Colours for 2017! 100 s of colour combinations Mix & Match EASY ORDERING visit our website for more information!
F I N I S H I N G M A P S
Index CORDON 31 CHIADO Apartments Floors 01 02 Living Room Suite Bathrooms 04 05 Kitchens Laundry 06 Apartments Floors 03 04 05 Lobby and Corridores Suite Bathrooms Living Room 08 09 Kitchens Laundry 10
CKBD Peakes Bath Scoresheet
CKBD Peakes Bath Scoresheet Part I: Graphics & Presentation Standards Each question pertains to all four drawing documents: Floor Plan, Mechanical, Construction Plan, and Elevation Drawing unless specifically
1. Division 6 Section "Rough Carpentry" for furring, blocking, and other carpentry work that is not exposed to view.
SECTION 06402 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
RetailPricing TheFurnitureGuild,Inc ph(888) fax(770)
RetailPricing2012 www.nuvovanity.com TheFurnitureGuild,Inc ph(888)479-4108-fax(770)479-0176 Made to Order in the USA. Modular construction for easy customization. Built using PureBond Formaldehyde free
Material Description Qty Units Cost Total SQUARE FOOTAGE TOTAL Area 1692 sqft
Material Report for plan: Willowdale A Page 1 of 7 SQUARE FOOTAGE TOTAL Area 1692 sqft EXCAVATION & FOUNDATION EXCAVATION & BACKFILL Conc. Footing (volume) 5 m³ 122.50 612.50 Conc. Footing (length) 6"x20"
H A R T I N G T O N C O B H A M
HARTINGTON COBHAM Approximate Gross Internal Area (Including Double Garage) 290.1 sq m / 3123 sq ft WM Utility Boots Drawing Room Family Breakfast Double Garage Up N Kitchen WC Coats Entrance Hall Study
KITCHEN OF THE WEEK. CliqStudios Designer Spotlight. Full Client Info Packet
KITCHEN OF THE WEEK CliqStudios Designer Spotlight Full Client Info Packet Morgan Hemmings mhemmings@cliqstudios.com (612) 425-2794 (o drawings + perspective NOTE: To ensure accuracy client is responsible
Bathroom of Your Dreams
Bathroom of Your Dreams JETTED STEAM SHOWERS SHOWER ENCLOSURES SHOWER COLUMNS ANTIQUE VANITIES CERAMIC VANITIES GLASS VANITIES STONE VANITIES VESSEL SINKS FAUCETS PRODUCT CATALOG 2007 Bathroom of Your
Edge Inclusions by Urbanedge Homes 1
Edge Inclusions by Urbanedge Homes 1 AN EDGE ABOVE THE REST In every Urbanedge home you ll find quality built-in from the foundations and the framework to the tiniest detail in finishes and fittings. We
E a s t o v e r C i t y H o m e s. c o m c o n t a c t u s : a n g e l s i m o n i n i. c o m
artist s conception EastoverCityHomes.com contact us: angela@simonini.com 704.906.6729 Site Plan artist s conception Eastover City Homes Quadplex artist s conception by simonini Quadplex: First Floor Opt.
Organisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
South Palm Place Condominium Homes
EQ_southpalm_8.x 0/7/0 3: PM Page 94.70.8668 764 Westwood Drive Tamarac, Florida 333 Surrounded by lush tropical landscaping and amidst a picturesque private lake, is an extraordinary community that offers
at Fiddler s Creek Offered by
at Fiddler s Creek at Fiddler s Creek hawthorne Elevation E Elevation F WWW.FIDDLERSCREEK.COM hawthorne 1 Story, 3 Bedrooms, 3 Baths, Den, 3 Car Garage Total A/C... 2,583 sq. ft. Entry...51 sq. ft. Garage...618
sargasso white Painted door with handle no Laminate worktop in Riven Slate with Mistral basin and exe tap. Sargasso framed mirror.
contents infinity fitted furniture collection sargasso 2 strada 8 adriatic 14 atlantic 18 aegean 20 pacific 26 java 30 space saving solutions 38 accessories 40 door ranges 42 worktops 44 handles 46 ceramics
For Further Information, contact:
Forest Hill Real Estate Inc., Brokerage Welcome To 33 Glenayr Road Magnificent Custom Built Forest Hill Home. 6+1 Bedroom Richard Wengle Design. Large Principal Rooms, Family Room Open Concept To Gourmet
CSI Section DMI Light Gage Structural Steel Framing Systems. Blocking Fire Rated Pre-cut (Proprietary) Furring Wall Preservative Treated
DMI Database CCF5IF9HGLPD-QB (4,88) $14,775.00 CSI Section 05400 DMI Light Gage Structural Steel Framing Systems Angle Framing Bridging Channel Flat Strapping Furring Clip Angle Soffit/Fascia/Deck Framing
Jan H: ARCHITECTURAL WOODWORK (06410-H)
2101 Commonwealth Blvd, Suite B Ann Arbor, MI 48105-5759 www.med.umich.edu/facilities/plan/ 064040-H: ARCHITECTURAL WOODWORK (06410-H) GENERAL In general, follow the guidelines below when designing and
ENTRÉ E : CABINETS FOR LIFE. Our stock cabinetry line with fast delivery and the fine styles and finishes you demand. DOOR STYLES 4-7 ACCESSORIES 8-11
ENTREE : CABINETS FOR LIFE Our stock cabinetry line with fast delivery and the fine styles and finishes you demand. DOOR STYLES 4-7 ACCESSORIES 8-11 KEEP IT GREEN! 12 ADA COMPATIBLE 12 EXTRA BENEFITS 13
THE COTTAGES OF PRAIRIE S EDGE. Lookbook. Selection Guide
THE COTTAGES OF PRAIRIE S EDGE Lookbook & Selection Guide 1 Contents Welcome Note from Summit Drive Design 6 Appliances 7 Plumbing Fixtures 11 Cabinetry, Hardware & Countertops 15 Flooring 19 Hardwood
INSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
Town & Country Traditions
Town & Country Traditions Town & Country The Collection with Curve Appeal At the juncture where form and function fuse perfectly together lies Fairmont Designs unique and sophisticated Town & Country collection.
Brentwood Collection 400 Series 3. Bel-Air Collection 600 Series 4. Beverly Collection 700 Series 5. Bentley Collection 200 Series 6-7
Bath accessories 2016 Table of Contents SOLID BRASS Brentwood Collection 400 Series 3 Bel-Air Collection 600 Series 4 Empire Industries has been manufacturing and distributing high quality bathroom and
CaseworkUSA. specifications. 1.1 General 1.2 Summary. 1.3 Related Sections. 1.4 Definitions. 1.5 Qualifications and Quality Assurance
1.1 General 1.2 Summary A. This section includes the following Scope of Work as referred to in the plans: 1. Plastic laminate manufactured casework 2. Plastic laminate countertops 1.3 Related Sections
Date 20 December 2013 Addendum No. 01. Project Children's Aid Society of Ottawa Ground Floor Project No
ARCHITECTURAL INTERIORS ADDENDUM Date 20 December 2013 Addendum No. 01 Issued By LWG Architectural Interiors From Lauren Coburn No.. of Pages 27 (Including this page) Project Children's Aid Society of
Apex Kitchen and Bath
Apex Kitchen and Bath You Dream It, We Build It. HOW TO MEASURE YOUR KITCHEN A guide to planning and creating the heart of your home. www.apexgraniteoutlet.com Kitchen Cabinet Granite Countertop Sink Faucet
Safety First! Review the Safety Checklist before performing tasks in this chapter.
Chapter 17. Cabinets 17.1 LAYING OUT KITCHEN CABINET UPPER UNITS 17.2 INSTALLING KITCHEN CABINET SUPPORT STRIPS 17.3 INSTALLING KITCHEN CABINET UPPER UNITS 17.4 INSTALLING RANGE HOOD 17.5 INSTALLING KITCHEN
TIRED OF THE VIEW? JUST WAIT 'TIL AUTUMN AND THEN A WINTER WONDERLAND IS RIGHT AROUND THE CORNER!
PICNIC PICNIC IS JUST LIKE IT SOUNDS. ELEGANT AND INTIMATE, IT S THE PERFECT LITTLE PLACE WHERE YOUR FAMILY & FRIENDS CAN RELAX AND ENJOY LIFE TOGETHER. CLAD IN RED AND WHITE BRICK WITH GREY ACCENT PANELS,
OUR SIMPLICITY PRODUCT LINE
2017 MERILLT BSICS SPEC BOOK DDENDUM 2017 OUR SIMPLICITY PRODUCT LINE 18 20 ½ W1518 - W2421 23 ½ W1824 - W2424 Wall Single Door Wall Cabinets C 18 High W1518 R or L W1818 R or L 20 1/2 High W2421 R or
RIVERBANK, CALIFORNIA. DIAMOND BAR WEST diamondbarwest.com 1
RIVERBANK, CALIFORNIA DIAMOND BAR WEST diamondbarwest.com 1 Welcome TO DIAMOND BAR WEST! Riverbank is an incorporated community of approximately 25,000 people. Riverbank offers award winning schools, major
BRONZE RANGE INCLUSIONS (STANDARD)
Cut costs Not quality BRONZE RANGE INCLUSIONS (STANDARD) While we strive to be particular in regard to the products we offer, we cannot warrant that products will necessarily match any sample or brochure
Cabinetry Design and Planning Guide
Cabinetry Inc. Face Frame Styles Door Styles Wood Species Cabinet Finishing Accessories Cabinetry Design and Planning Guide Designed to make all our lives easier. Face Frame Styles Standard 2 Stiles and
2250 S LOCUST APARTMENT IMPROVEMENTS EXPENSES
APT #1 APT #1 11/12/2014 NEW GARAGE LOCKS $ 89.00 11/12/2014 NEW LOCKS $ 169.80 1/11/2015 GARAGE KEY COPIES $ 6.47 1/23/2015 PLUMBING REPAIRS REPLACED MAIN BATH SINK PIPES $ 299.76 2/2/2015 PAINTING $
1. Name the horizontal member that rests on the foundation wall to support other wood members.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC62 - Drafting - Architr II Test 1 Description: Unit C - Floorplans - Test 3 (ALL) Form: 501 1. Name the horizontal member that rests
COUNTERTOP Specifications 5.1.2
COUNTERTOP Specifications 5.1.2 Countertop Items 500, 502, 503, 550, 552, 553, 600, 602, 603, 650, 652 & 653 Rectangular Front Countertop for Single Round Basin Item No. 500 for Double Round Basin Item
Chisel TAPWARE SHOWERS ACCESSORIES
Chisel TAPWARE SHOWERS ACCESSORIES Class Leading Design The designers at Faucet Strommen used round, soft square & rectangle elements to form the beautiful Chisel tapware range. Perfect proportions and
SECTION LABORATORY CASEWORK AND EQUIPMENT
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 12 35 53 LABORATORY CASEWORK AND EQUIPMENT A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
NCIDQ Restroom Drawing. Answers to the most common questions about this drawing for the Practicum Qpractice
NCIDQ Restroom Drawing Answers to the most common questions about this drawing for the Practicum. 2016 Qpractice Table of Contents This is a summary guide of most frequently asked questions about the Practicum
Pre-Hung Doors. Available Hinge Finishes: Satin Nickel, Antique Nickel, Satin Chrome, Venetian Bronze, Iron Black, Brass
Price Group D Product Pricing - February 1, 2014 Pre-Hung Doors EZWOODPRODUCTS.COM All Doors Hung on Finger Joint 4&5/8" Jamb, Using three 3"x3" 1/4" Radius Hinges. All Doors Drilled for Door Knob, Backset,
Chapter 19. Interior Finish Work
Chapter 19. Interior Finish Work 19.1 INSTALLING FLOOR TRIM 19.2 INSTALLING CLOSET SHELVES AND POLES 19.3 INSTALLING BATHROOM ACCESSORIES 19.4 HANGING MINI-BLINDS 19.5 INSTALLING APPLIANCES 19.6 INSTALLING
SECTION ARCHITECTURAL WOOD CASEWORK
SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS
Music Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance
1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,
Retrofit Apron Front Farm Sink With Dual Mount Capability Installation Instructions
For Under-Mount Installation please refer to page 14 FOR EXPERIENCED AND PROFESSIONAL INSTALLATION ONLY This installation project is designed for an advanced skill level. Disclaimer: Undermount Application
Augusta. CRAFTSMAN 2,067 SQ. FT. (Elevation Shown with Optional Metal Roof Sections) 2 BEDS 2 BATHS 2 CAR GARAGE
Augusta 2 BEDS 2 BATHS 2 CAR GARAGE CRAFTSMAN 2,067 SQ. FT. (Elevation Shown with Optional Metal Roof Sections) to show specific detailing. As-Built Condition will control. Price(s) shown may not reflect
.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Rough
2018 CATALOG. Adair Collection Conway Collection Fairview Collection Virginia Collection
2018 CATALOG Adair Collection Conway Collection Fairview Collection Virginia Collection COLLECTIONS Adair Collection SATIN NICKEL A B C D F G H I J K L M Q R V S W N O P T U X A 2 Light bath bar 570929
NOTE: THIS PLAN/DOCUMENT IS FOR ILLUSTRATION PURPOSES ONLY. ALL DIMENSIONS ARE APPROXIMATE. WHILE EVERY ENDEAVOUR HAS BEEN MADE TO VERIFY THE CORRECT
RLA 181689 NOTE: THIS PLAN/DOCUMENT IS FOR ILLUSTRATION PURPOSES ONLY. ALL DIMENSIONS ARE APPROXIMATE. WHILE EVERY ENDEAVOUR HAS BEEN MADE TO VERIFY THE CORRECT DETAILS NEITHER THE VENDOR, THE AGENT, NOR