11SIXTY5 Weaver Dairy Road

Size: px

Start display at page:

Download "11SIXTY5 Weaver Dairy Road"

Clyde Fletcher
5 years ago
Views:

5 SITEPLAN NOTES 2 C-2.0 BICYCLE RACK NTS Weaver Dairy Road Job Number: 1529 WLR, MTC, VJC WLR, VJC STAIR SITE PLAN 1 C-2.0 SITE PLAN 1" = 30' C-2.0 PLAZA DETAIL PLAN 1" = 20' C-2.0

6 1 C-3.0 GRADING AND DRAINAGE PLAN 1" = 30' '-6"AISLE WIDTH ELECTRICAL TENANT SUITE SF ELEV LOBBY STAIR 103 TENANT SUITE 1360 SF 992 SF RETAIL RETAIL BFP Weaver Dairy Road Job Number: 1529 WLR, MTC, VJC WLR, VJC GRADING PLAN C-3.0

WIDTH BFP RETAIL 166 992 SF TENANT SUITE 103 13517 SF RETAIL 164 1360 SF TENANT SUITE LOBBY ELEV STAIR 1 C-5.0 REMOTE FIRE DEPARTMENT CONNECTION (FDC) 2 C-5.

7 WIDTH BFP RETAIL SF TENANT SUITE SF RETAIL SF TENANT SUITE LOBBY ELEV STAIR 1 C-5.0 REMOTE FIRE DEPARTMENT CONNECTION (FDC) 2 C-5.0 POST INDICATOR VALVE (PIV) ELECTRICAL 22'-6"AISLE utility notes fire protection notes Weaver Dairy Road Job Number: 1529 WLR, MTC, VJC WLR, VJC UTILITY PLAN 1 C-5.0 UTILITY PLAN 1" = 30' C-5.0

PARKING DECK SEE 1/A204 FOR CONTINUATION OF ELEVATION EGRESS STAIR EXIT ELEVATOR

HIGH ROOF 630'-4" PARAPET 627'-4" ROOF 627'-0" LEVEL 3 612'-6" LEVEL 2 598'-0" LEVEL

580'-0" 48'-4" 3'-0" 16'-0" 14'-6" 14'-6" LOCATION OF FUTURE SIGNAGE MONUMENTAL STAIR

BALCONY GROUND LEVEL RETAIL SUITE ENTRY/EXIT C GROUND LEVEL TENANT ACCESS DOOR B

633'-4" 16'-0" 14'-6" 14'-6" 3'-0" 3'-0" 48'-4" EAST ELEVATION SITE ACCESS DRIVE

REQUESTS FROM THE TOWN OF CHAPEL HILL AS A PART OF THE SPECIAL USE PERMIT PROCESS. 2.

EXERCISES. 3. PROTECT AREA OF WORK AND ADJACENT AREAS FROM DAMAGE. 4.

IN CASE OF CONFLICT, CONSULT THE ARCHITECT FOR DIRECTION. 5.

NOTED. MAINTAIN DIMENSIONS MARKED CLEAR.

REFER TO INTERIOR FINISH INFORMATION FOR WALL FINISH. 6.

DIMENSION TO INCLUDE INTERIOR FINISH MATERIALS. ALL DOOR CLEARANCES TO MEET ANSI A117.

REFER TO THE OWNER FURNISHED OWNER INSTALLED LIST FOR EQUIPMENT TO BE INSTALLED BY

PROVIDE CONCEALED BLOCKING AS REQUIRED FOR WORK BY OWNER S OTHER CONTRACTORS.

8. PLUMBING AND ELECTRICAL UTILITY SERVICES SHOWN IN THE P AND E SERIES ONLY EXTENDS

GC RESPONSIBLE FOR FINAL COORDINATION OF THESE ELEMENTS IF SITE CONDITIONS VARY FROM

NOTIFY ARCHITECT WITH ANY DISCREPANCIES OR ALTERATIONS TO THE DESIGN DOCUMENTS THAT

REFER TO CIVIL / LANDSCAPE DRAWINGS FOR FINAL GRADE ELEVATIONS AROUND.

OUTLETS, DATA OUTLETS, FIRE ALARM, FIRE STROBE, THERMOSTATS, ETC. 2.

10 PARKING DECK SEE 1/A204 FOR CONTINUATION OF ELEVATION EGRESS STAIR EXIT ELEVATOR LOBBY ENTRY GROUND LEVEL TENANT ACCESS DOOR MIXED-USE SHELL F TOP OF ELEVATOR 633'-4" HIGH ROOF 630'-4" PARAPET 627'-4" ROOF 627'-0" LEVEL 3 612'-6" LEVEL 2 598'-0" LEVEL 1 582'-0" T.O.F. 580'-0" 48'-4" 3'-0" 16'-0" 14'-6" 14'-6" LOCATION OF FUTURE SIGNAGE MONUMENTAL STAIR EXIT E 13'-4" PARKING DECK CANOPY CLEARANCE 1 LOCATION OF FUTURE SIGNAGE D BALCONY GROUND LEVEL RETAIL SUITE ENTRY/EXIT C GROUND LEVEL TENANT ACCESS DOOR B GROUND LEVEL TENANT ACCESS DOOR UTILITY ACCESS DOOR A 5 2'-0" GRADE TOP OF ELEVATOR 633'-4" 16'-0" 14'-6" 14'-6" 3'-0" 3'-0" 48'-4" EAST ELEVATION SITE ACCESS DRIVE ELEVATION NORTH ELEVATION WEAVER DAIRY ELEVATION HIGH ROOF 630'-4" PARAPET 627'-4" ROOF 627'-0" LEVEL 3 612'-6" LEVEL 2 598'-0" LEVEL 1 582'-0" T.O.F. 580'-0" 1/8" = 1'-0" 2 1/8" = 1'-0" 1 GENERAL NOTES: 1. FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISIONS BASED ON COMMENTS AND REQUESTS FROM THE TOWN OF CHAPEL HILL AS A PART OF THE SPECIAL USE PERMIT PROCESS. 2. FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISION BASED ON COSTING EXERCISES. 3. PROTECT AREA OF WORK AND ADJACENT AREAS FROM DAMAGE. 4. DO NOT SCALE DRAWINGS. WRITTEN DIMENSIONS GOVERN. IN CASE OF CONFLICT, CONSULT THE ARCHITECT FOR DIRECTION. 5. INTERIOR PARTITIONS ARE DIMENSIONED FROM FINISH FACE TO FINISH FACE, UNLESS OTHERWISE NOTED. MAINTAIN DIMENSIONS MARKED CLEAR. ALLOW FOR THICKNESS OF FINISHED WALL MATERIAL WHEN LAYING OUT WALLS. REFER TO INTERIOR FINISH INFORMATION FOR WALL FINISH. 6. ALL INTERIOR DOORS TO BE LOCATED 6 OFF PERPENDICULAR WALL, UNO. DIMENSION TO INCLUDE INTERIOR FINISH MATERIALS. ALL DOOR CLEARANCES TO MEET ANSI A ACCESSIBLE CLEARANCES. 7. REFER TO THE OWNER FURNISHED OWNER INSTALLED LIST FOR EQUIPMENT TO BE INSTALLED BY OWNER S CONTRACTOR. PROVIDE CONCEALED BLOCKING AS REQUIRED FOR WORK BY OWNER S OTHER CONTRACTORS. COORDINATE WITH THE OWNER S CONTRACTORS THE SIZE, LOCATION, AND BLOCKING REQUIREMENTS. 8. PLUMBING AND ELECTRICAL UTILITY SERVICES SHOWN IN THE P AND E SERIES ONLY EXTENDS 5-0 OUTSIDE OF THE. GC RESPONSIBLE FOR FINAL COORDINATION OF THESE ELEMENTS IF SITE CONDITIONS VARY FROM THE CIVIL / LANDSCAPE DESIGN DOCUMENTS. NOTIFY ARCHITECT WITH ANY DISCREPANCIES OR ALTERATIONS TO THE DESIGN DOCUMENTS THAT RESULT FROM SITE CONDITIONS. 9. REFER TO CIVIL / LANDSCAPE DRAWINGS FOR FINAL GRADE ELEVATIONS AROUND. FINISH GRADE TO BE A MINIMUM OF 6 BELOW FINISH FLOOR LEVEL UNLESS NOTED OTHERWISE. DRAWING REFERENCES: 1. REFER TO G006 FOR TYPICAL INTERIOR MOUNTING S FOR TOILET ROOM ACCESSORIES, ELECTRICAL OUTLETS, DATA OUTLETS, FIRE ALARM, FIRE STROBE, THERMOSTATS, ETC. 2. REFER TO SHEET G200 FOR EXTERIOR WALL INFORMATION 3. REFER TO SHEET G210 FOR INTERIOR WALL INFORMATION. UNLESS NOTED OTHERWISE, ALL INTERIOR WALLS TO BE B1. DESIGN NARRATIVE THE DESIGN INTENT FOR MATERIAL EXPRESSION IS BRICK VENEER ON LEVEL 1 & 2, AND AN ALTERNATE MATERIAL (METAL PANEL/EIFS) ON LEVEL 3, WITH LARGE AREAS OF GLAZING BREAKING UP THE ELEVATIONS TO SIGNIFY MOVEMENT AND ENTRY. ToCH BLDG HGT REQ'S - OI-3 TABLE DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3 (F) PRIMARY N/A (G) (H) (I) (J) SECONDARY STREET INTERIOR SOLAR N/A 0' 0' 0' NOTE: DUE TO THE AND SOLAR REQUIREMENTS BEING N/A AND 0, THIS INFORMATION HAS NOT BEEN INCLUDED ON THE EXTERIOR ELEVATIONS AS IT HAS NO BEARING ON THE OVERALL DESIGN. FINISH LEGEND - EXTERIOR MATERIALS UM1 NOTE: PRIMARY FIELD BRICK UM2 STACK BOND NOTE: SECONDARY COLOR MP METAL COMPOSITE MATERIAL DESCRIPTION: Metal Composite Metal : Fire Retardant Core SIZE: Refer to Sections and Elevations THICKNESS: 0.157" Material, 2" Panel STYLE: Route and Return CW Glazed Aluminum Curtain Wall : RELIANCE-SS CASSETTE SIZE: 2 1/2" x 8" ES Entrances and Storefronts : SERIES 3000 THERMAL MULTIPLANE SIZE: 2" x 4 1/2" STYLE: FRONT SET - 1" GLAZING GL1 : SunGuard SNX 51/23 GL1* : SunGuard SNX 51/23 Apply Translucent Film on Surface 4 THESE DRAWINGS AND THE ACCOMPANYING SPECIFICATIONS ARE INSTRUMENTS OF SERVICE AND AS SUCH SHALL REMAIN THE PROPERTY OF THE ARCHITECT. THEY HAVE BEEN PREPARED FOR A SPECIFIC PROJECT AND SHALL NOT BE USED IN CONJUNCTION WITH ANY OTHER PROJECTS WITHOUT PRIOR WRITTEN PERMISSION OF THE ARCHITECT PIN: PITTSBORO -ASHEVILLE Job Number: WEAVER DAIRY SHELL OFFICE 1165 WEAVER DAIRY CHAPEL HILL, NC SAL 11/30/ ELEVATIONS A200

580'-0" 45'-4" 16'-0" 14'-6" 14'-6" FINISH GRADE A B C D E HIGH ROOF 630'-4" 580'-0" 43'-4"

GARAGE CONNECTION BALCONY AREA BEYOND MIXED-USE SHELL 9'-10" F PARKING DECK SEE 1/A203 FOR

SOUTH ELEVATION ELEVATION FACING PARKING DECK 1/8" = 1'-0" 2 1/8" = 1'-0" 1 GENERAL NOTES: 1.

FROM THE TOWN OF CHAPEL HILL AS A PART OF THE SPECIAL USE PERMIT PROCESS. 2.

PROTECT AREA OF WORK AND ADJACENT AREAS FROM DAMAGE. 4. DO NOT SCALE DRAWINGS.

INTERIOR PARTITIONS ARE DIMENSIONED FROM FINISH FACE TO FINISH FACE, UNLESS OTHERWISE NOTED.

ALLOW FOR THICKNESS OF FINISHED WALL MATERIAL WHEN LAYING OUT WALLS.

ALL INTERIOR DOORS TO BE LOCATED 6 OFF PERPENDICULAR WALL, UNO.

CONTRACTOR. PROVIDE CONCEALED BLOCKING AS REQUIRED FOR WORK BY OWNER S OTHER CONTRACTORS.

PLUMBING AND ELECTRICAL UTILITY SERVICES SHOWN IN THE P AND E SERIES ONLY EXTENDS 5-0 OUTSIDE

GC RESPONSIBLE FOR FINAL COORDINATION OF THESE ELEMENTS IF SITE CONDITIONS VARY FROM THE CIVIL

NOTIFY ARCHITECT WITH ANY DISCREPANCIES OR ALTERATIONS TO THE DESIGN DOCUMENTS THAT RESULT FROM

FINISH GRADE TO BE A MINIMUM OF 6 BELOW FINISH FLOOR LEVEL UNLESS NOTED OTHERWISE.

REFER TO G006 FOR TYPICAL INTERIOR MOUNTING S FOR TOILET ROOM ACCESSORIES, ELECTRICAL OUTLETS,

REFER TO SHEET G200 FOR EXTERIOR WALL INFORMATION 3.

UNLESS NOTED OTHERWISE, ALL INTERIOR WALLS TO BE B1.

AN ALTERNATE MATERIAL (METAL PANEL/EIFS) ON LEVEL 3, WITH LARGE AREAS OF GLAZING BREAKING UP

8-1 - DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3 (F) PRIMARY N/A (G) (H) (I) (J)

11 PARAPET 627'-4" ROOF 627'-0" LEVEL 3 612'-6" LEVEL 2 598'-0" LEVEL 1 582'-0" T.O.F. 580'-0" 45'-4" 16'-0" 14'-6" 14'-6" FINISH GRADE A B C D E HIGH ROOF 630'-4" PARAPET 627'-4" ROOF 627'-0" LEVEL 3 612'-6" LEVEL 2 598'-0" LEVEL 1 582'-0" T.O.F. 580'-0" 43'-4" 2'-0" 14'-6" 14'-6" 16'-0" FINISH GRADE BALCONY BALCONY 23'-8" 9'-8" 3'-0" SECTION AT GARAGE CONNECTION BALCONY AREA BEYOND MIXED-USE SHELL 9'-10" F PARKING DECK SEE 1/A203 FOR CONTINUATION OF ELEVATION WEST ELEVATION ELEVATION FACING WEAVER CROSSING FINISH GRADE 48'-4" SOUTH ELEVATION ELEVATION FACING PARKING DECK 1/8" = 1'-0" 2 1/8" = 1'-0" 1 GENERAL NOTES: 1. FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISIONS BASED ON COMMENTS AND REQUESTS FROM THE TOWN OF CHAPEL HILL AS A PART OF THE SPECIAL USE PERMIT PROCESS. 2. FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISION BASED ON COSTING EXERCISES. 3. PROTECT AREA OF WORK AND ADJACENT AREAS FROM DAMAGE. 4. DO NOT SCALE DRAWINGS. WRITTEN DIMENSIONS GOVERN. IN CASE OF CONFLICT, CONSULT THE ARCHITECT FOR DIRECTION. 5. INTERIOR PARTITIONS ARE DIMENSIONED FROM FINISH FACE TO FINISH FACE, UNLESS OTHERWISE NOTED. MAINTAIN DIMENSIONS MARKED CLEAR. ALLOW FOR THICKNESS OF FINISHED WALL MATERIAL WHEN LAYING OUT WALLS. REFER TO INTERIOR FINISH INFORMATION FOR WALL FINISH. 6. ALL INTERIOR DOORS TO BE LOCATED 6 OFF PERPENDICULAR WALL, UNO. DIMENSION TO INCLUDE INTERIOR FINISH MATERIALS. ALL DOOR CLEARANCES TO MEET ANSI A ACCESSIBLE CLEARANCES. 7. REFER TO THE OWNER FURNISHED OWNER INSTALLED LIST FOR EQUIPMENT TO BE INSTALLED BY OWNER S CONTRACTOR. PROVIDE CONCEALED BLOCKING AS REQUIRED FOR WORK BY OWNER S OTHER CONTRACTORS. COORDINATE WITH THE OWNER S CONTRACTORS THE SIZE, LOCATION, AND BLOCKING REQUIREMENTS. 8. PLUMBING AND ELECTRICAL UTILITY SERVICES SHOWN IN THE P AND E SERIES ONLY EXTENDS 5-0 OUTSIDE OF THE. GC RESPONSIBLE FOR FINAL COORDINATION OF THESE ELEMENTS IF SITE CONDITIONS VARY FROM THE CIVIL / LANDSCAPE DESIGN DOCUMENTS. NOTIFY ARCHITECT WITH ANY DISCREPANCIES OR ALTERATIONS TO THE DESIGN DOCUMENTS THAT RESULT FROM SITE CONDITIONS. 9. REFER TO CIVIL / LANDSCAPE DRAWINGS FOR FINAL GRADE ELEVATIONS AROUND. FINISH GRADE TO BE A MINIMUM OF 6 BELOW FINISH FLOOR LEVEL UNLESS NOTED OTHERWISE. DRAWING REFERENCES: 1. REFER TO G006 FOR TYPICAL INTERIOR MOUNTING S FOR TOILET ROOM ACCESSORIES, ELECTRICAL OUTLETS, DATA OUTLETS, FIRE ALARM, FIRE STROBE, THERMOSTATS, ETC. 2. REFER TO SHEET G200 FOR EXTERIOR WALL INFORMATION 3. REFER TO SHEET G210 FOR INTERIOR WALL INFORMATION. UNLESS NOTED OTHERWISE, ALL INTERIOR WALLS TO BE B1. DESIGN NARRATIVE THE DESIGN INTENT FOR MATERIAL EXPRESSION IS BRICK VENEER ON LEVEL 1 & 2, AND AN ALTERNATE MATERIAL (METAL PANEL/EIFS) ON LEVEL 3, WITH LARGE AREAS OF GLAZING BREAKING UP THE ELEVATIONS TO SIGNIFY MOVEMENT AND ENTRY. ToCH BLDG HGT REQ'S - OI-3 TABLE DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3 (F) PRIMARY N/A (G) (H) (I) (J) SECONDARY STREET INTERIOR SOLAR N/A 0' 0' 0' NOTE: DUE TO THE AND SOLAR REQUIREMENTS BEING N/A AND 0, THIS INFORMATION HAS NOT BEEN INCLUDED ON THE EXTERIOR ELEVATIONS AS IT HAS NO BEARING ON THE OVERALL DESIGN. FINISH LEGEND - EXTERIOR MATERIALS UM1 NOTE: PRIMARY FIELD BRICK UM2 STACK BOND NOTE: SECONDARY COLOR MP METAL COMPOSITE MATERIAL DESCRIPTION: Metal Composite Metal : Fire Retardant Core SIZE: Refer to Sections and Elevations THICKNESS: 0.157" Material, 2" Panel STYLE: Route and Return CW Glazed Aluminum Curtain Wall : RELIANCE-SS CASSETTE SIZE: 2 1/2" x 8" ES Entrances and Storefronts : SERIES 3000 THERMAL MULTIPLANE SIZE: 2" x 4 1/2" STYLE: FRONT SET - 1" GLAZING GL1 : SunGuard SNX 51/23 GL1* : SunGuard SNX 51/23 Apply Translucent Film on Surface 4 THESE DRAWINGS AND THE ACCOMPANYING SPECIFICATIONS ARE INSTRUMENTS OF SERVICE AND AS SUCH SHALL REMAIN THE PROPERTY OF THE ARCHITECT. THEY HAVE BEEN PREPARED FOR A SPECIFIC PROJECT AND SHALL NOT BE USED IN CONJUNCTION WITH ANY OTHER PROJECTS WITHOUT PRIOR WRITTEN PERMISSION OF THE ARCHITECT PIN: PITTSBORO -ASHEVILLE Job Number: WEAVER DAIRY SHELL OFFICE 1165 WEAVER DAIRY CHAPEL HILL, NC SAL 11/30/ ELEVATIONS A201

MIXED-USE SHELL SEE 2/A201 FOR CONTINUATION OF ELEVATION

LEVEL 2 598'-0" PARKING ENTRY 581'-6" 43'-6 1/8" FINISH

NOTE: PRIMARY FIELD BRICK UM2 STACK BOND NOTE: SECONDARY

23METAL COMPOSITE MATERIAL DESCRIPTION: Metal Composite

Glazed Aluminum Curtain Wall : RELIANCE-SS CASSETTE SIZE: 2

3000 THERMAL MULTIPLANE SIZE: 2" x 4 1/2" STYLE: FRONT SET -

51/23 Apply Translucent Film on Surface 4 DESIGN NARRATIVE

LEVEL 1 & 2, AND AN ALTERNATE MATERIAL (METAL PANEL/EIFS) ON

ELEVATIONS TO SIGNIFY MOVEMENT AND ENTRY.

8-1 - DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3

SOLAR N/A 0' 0' 0' NOTE: DUE TO THE AND SOLAR REQUIREMENTS

THE EXTERIOR ELEVATIONS AS IT HAS NO BEARING ON THE OVERALL

5 614'-6" PARKING LEVEL 2.5 603'-6" PARKING LEVEL 1.

G3 13'-4" CLEAR AT UNDERSIDE OF CANOPY LOCATION OF FUTURE

5'-7 1/4" 44'-1 3/4" G1 EGRESS STAIR EXIT 33'-11 1/4" 5'-4

4'-3" FINISH GRADE PARKING LEVEL 4.5 625'-6" PARKING LEVEL 3.

5 587'-6 3/4" PARKING SIDE EXIT 585'-9" DECK ELEVATION -

ELEVATION - SOUTH 1/8" = 1'-0" 2 THESE DRAWINGS AND THE

12 MIXED-USE SHELL SEE 2/A201 FOR CONTINUATION OF ELEVATION PARKING LEVEL 4 620'-0" PARKING LEVEL 3 609'-0" PARKING LEVEL 2 598'-0" PARKING ENTRY 581'-6" 43'-6 1/8" FINISH GRADE 5'-0 1/8" 11'-0" 11'-0" 16'-6" 5'-6" PARKING DECK GA GB GC GD GD.7 GE GF GG GH GI GJ FINISH LEGEND - EXTERIOR MATERIALS UM1 NOTE: PRIMARY FIELD BRICK UM2 STACK BOND NOTE: SECONDARY COLOR MP METAL COMPOSITE MATERIAL DESCRIPTION: Metal Composite Metal : Fire Retardant Core SIZE: Refer to Sections and Elevations THICKNESS: 0.157" Material, 2" Panel STYLE: Route and Return CW Glazed Aluminum Curtain Wall : RELIANCE-SS CASSETTE SIZE: 2 1/2" x 8" ES Entrances and Storefronts : SERIES 3000 THERMAL MULTIPLANE SIZE: 2" x 4 1/2" STYLE: FRONT SET - 1" GLAZING GL1 : SunGuard SNX 51/23 GL1* : SunGuard SNX 51/23 Apply Translucent Film on Surface 4 DESIGN NARRATIVE THE DESIGN INTENT FOR MATERIAL EXPRESSION IS BRICK VENEER ON LEVEL 1 & 2, AND AN ALTERNATE MATERIAL (METAL PANEL/EIFS) ON LEVEL 3, WITH LARGE AREAS OF GLAZING BREAKING UP THE ELEVATIONS TO SIGNIFY MOVEMENT AND ENTRY. ToCH BLDG HGT REQ'S - OI-3 TABLE DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3 (F) PRIMARY N/A (G) (H) (I) (J) SECONDARY STREET INTERIOR SOLAR N/A 0' 0' 0' NOTE: DUE TO THE AND SOLAR REQUIREMENTS BEING N/A AND 0, THIS INFORMATION HAS NOT BEEN INCLUDED ON THE EXTERIOR ELEVATIONS AS IT HAS NO BEARING ON THE OVERALL DESIGN. PARKING LEVEL '-6" PARKING LEVEL '-6" PARKING LEVEL '-6" PARKING LEVEL '-6 3/4" 47'-11 1/4" 10'-0" 11'-0" 11'-0" 15'-11 1/4" G3 13'-4" CLEAR AT UNDERSIDE OF CANOPY LOCATION OF FUTURE SIGNAGE WEAVER CROSSING VEHICULAR ENTRY/EXIT 5'-7 1/4" G2 5'-7 1/4" 44'-1 3/4" G1 EGRESS STAIR EXIT 33'-11 1/4" 5'-4 3/4" 39'-4" 5'-6" 15'-11 1/4" 11'-0" 11'-0" 10'-0" 1'-9 3/4" 4'-3" FINISH GRADE PARKING LEVEL '-6" PARKING LEVEL '-6" 49'-9" PARKING LEVEL '-6" PARKING LEVEL '-6 3/4" PARKING SIDE EXIT 585'-9" DECK ELEVATION - WEST ELEVATION FACING WEAVER CROSSING 1/8" = 1'-0" 1 DECK ELEVATION - SOUTH 1/8" = 1'-0" 2 THESE DRAWINGS AND THE ACCOMPANYING SPECIFICATIONS ARE INSTRUMENTS OF SERVICE AND AS SUCH SHALL REMAIN THE PROPERTY OF THE ARCHITECT. THEY HAVE BEEN PREPARED FOR A SPECIFIC PROJECT AND SHALL NOT BE USED IN CONJUNCTION WITH ANY OTHER PROJECTS WITHOUT PRIOR WRITTEN PERMISSION OF THE ARCHITECT PIN: PITTSBORO -ASHEVILLE Job Number: WEAVER DAIRY SHELL OFFICE 1165 WEAVER DAIRY CHAPEL HILL, NC SAL 11/30/ PARKING DECK ELEVATIONS A203

PARKING LEVEL 4.5 625'-6" GJ GI GH GG GF GE GD.

PARKING LEVEL 4 620'-0" PARKING LEVEL 3.5 614'-6" PARKING LEVEL 2.

5 587'-6 3/4" FINISH LEGEND - EXTERIOR MATERIALS UM1 NOTE: PRIMARY FIELD BRICK UM2

23METAL COMPOSITE MATERIAL DESCRIPTION: Metal Composite Metal : Fire Retardant Core

157" Material, 2" Panel STYLE: Route and Return CW1 08 4413 Glazed Aluminum Curtain

SERIES 3000 THERMAL MULTIPLANE SIZE: 2" x 4 1/2" STYLE: FRONT SET - 1" GLAZING GL1 :

DESIGN NARRATIVE THE DESIGN INTENT FOR MATERIAL EXPRESSION IS BRICK VENEER ON LEVEL 1

GLAZING BREAKING UP THE ELEVATIONS TO SIGNIFY MOVEMENT AND ENTRY.

8-1 - DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3 (F) PRIMARY N/A (G) (H) (I)

REQUIREMENTS BEING N/A AND 0, THIS INFORMATION HAS NOT BEEN INCLUDED ON THE EXTERIOR

HIGH ROOF 630'-4" PARKING LEVEL 4 620'-0" PARKING LEVEL 3 609'-0" PARKING LEVEL 2

16'-6" 11'-0" 11'-0" 4'-4" 13'-10" CLEARANCE UNDER CANOPY 13'-4" CLEARANCE AT FIRST

PARKING LEVEL 2 598'-0" PARKING ENTRY 581'-6" DECK ELEVATION - EAST 1/8" = 1'-0" 1

13 PARKING LEVEL '-6" GJ GI GH GG GF GE GD.7 GD GC GB GA PARKING DECK MIXED-USE SHELL SEE 2/A200 FOR CONTINUATION OF ELEVATION PARKING LEVEL 4 620'-0" PARKING LEVEL '-6" PARKING LEVEL '-6" FINISH GRADE PARKING LEVEL '-6 3/4" FINISH LEGEND - EXTERIOR MATERIALS UM1 NOTE: PRIMARY FIELD BRICK UM2 STACK BOND NOTE: SECONDARY COLOR MP METAL COMPOSITE MATERIAL DESCRIPTION: Metal Composite Metal : Fire Retardant Core SIZE: Refer to Sections and Elevations THICKNESS: 0.157" Material, 2" Panel STYLE: Route and Return CW Glazed Aluminum Curtain Wall : RELIANCE-SS CASSETTE SIZE: 2 1/2" x 8" ES Entrances and Storefronts : SERIES 3000 THERMAL MULTIPLANE SIZE: 2" x 4 1/2" STYLE: FRONT SET - 1" GLAZING GL1 : SunGuard SNX 51/23 GL1* : SunGuard SNX 51/23 Apply Translucent Film on Surface 4 DESIGN NARRATIVE THE DESIGN INTENT FOR MATERIAL EXPRESSION IS BRICK VENEER ON LEVEL 1 & 2, AND AN ALTERNATE MATERIAL (METAL PANEL/EIFS) ON LEVEL 3, WITH LARGE AREAS OF GLAZING BREAKING UP THE ELEVATIONS TO SIGNIFY MOVEMENT AND ENTRY. ToCH BLDG HGT REQ'S - OI-3 TABLE DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3 (F) PRIMARY N/A (G) (H) (I) (J) SECONDARY STREET INTERIOR SOLAR N/A 0' 0' 0' NOTE: DUE TO THE AND SOLAR REQUIREMENTS BEING N/A AND 0, THIS INFORMATION HAS NOT BEEN INCLUDED ON THE EXTERIOR ELEVATIONS AS IT HAS NO BEARING ON THE OVERALL DESIGN. HIGH ROOF 630'-4" PARKING LEVEL 4 620'-0" PARKING LEVEL 3 609'-0" PARKING LEVEL 2 598'-0" PARKING ENTRY 581'-6" 51'-10" TOP OF ELEVATOR OVER RUN 42'-10" 6'-0" 3'-0" 16'-6" 11'-0" 11'-0" 4'-4" 13'-10" CLEARANCE UNDER CANOPY 13'-4" CLEARANCE AT FIRST LVL OF DECK G1 1 G2 2 3 G3 4 FUTURE SIGNAGE LOCATION VEHICULAR GARAGE ACCESS FROM WEAVER DAIRY RD. PEDESTRIAN GARAGE ENTRY/EXIT SECTION OF ADJACENT 43'-6 1/8" PARKING LEVEL 3 609'-0" PARKING LEVEL 2 598'-0" PARKING ENTRY 581'-6" DECK ELEVATION - EAST 1/8" = 1'-0" 1 DECK ELEVATION - NORTH 1/8" = 1'-0" 2 THESE DRAWINGS AND THE ACCOMPANYING SPECIFICATIONS ARE INSTRUMENTS OF SERVICE AND AS SUCH SHALL REMAIN THE PROPERTY OF THE ARCHITECT. THEY HAVE BEEN PREPARED FOR A SPECIFIC PROJECT AND SHALL NOT BE USED IN CONJUNCTION WITH ANY OTHER PROJECTS WITHOUT PRIOR WRITTEN PERMISSION OF THE ARCHITECT PIN: PITTSBORO -ASHEVILLE WEAVER DAIRY SHELL OFFICE 1165 WEAVER DAIRY CHAPEL HILL, NC Job Number: SAL 11/30/ PARKING DECK ELEVATIONS A204

45'-4" 47'-0" PARKING DECK SIDE EXIT TO WEAVER CROSSING OVERALL EAST ELEVATION 1/16" = 1'-0" 2 OVERALL WEST ELEVATION

FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISIONS BASED ON COMMENTS AND REQUESTS FROM THE TOWN OF CHAPEL

FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISION BASED ON COSTING EXERCISES. 3.

MAINTAIN DIMENSIONS MARKED CLEAR. ALLOW FOR THICKNESS OF FINISHED WALL MATERIAL WHEN LAYING OUT WALLS.

ALL INTERIOR DOORS TO BE LOCATED 6 OFF PERPENDICULAR WALL, UNO. DIMENSION TO INCLUDE INTERIOR FINISH MATERIALS.

REFER TO THE OWNER FURNISHED OWNER INSTALLED LIST FOR EQUIPMENT TO BE INSTALLED BY OWNER S CONTRACTOR.

COORDINATE WITH THE OWNER S CONTRACTORS THE SIZE, LOCATION, AND BLOCKING REQUIREMENTS. 8.

GC RESPONSIBLE FOR FINAL COORDINATION OF THESE ELEMENTS IF SITE CONDITIONS VARY FROM THE CIVIL / LANDSCAPE DESIGN

NOTIFY ARCHITECT WITH ANY DISCREPANCIES OR ALTERATIONS TO THE DESIGN DOCUMENTS THAT RESULT FROM SITE CONDITIONS. 9.

FINISH GRADE TO BE A MINIMUM OF 6 BELOW FINISH FLOOR LEVEL UNLESS NOTED OTHERWISE. DRAWING REFERENCES: 1.

ALARM, FIRE STROBE, THERMOSTATS, ETC. 2. REFER TO SHEET G200 FOR EXTERIOR WALL INFORMATION 3.

SOLAR N/A 0' 0' 0' NOTE: DUE TO THE AND SOLAR REQUIREMENTS BEING N/A AND 0, THIS INFORMATION HAS NOT BEEN INCLUDED ON

FINISH LEGEND - EXTERIOR MATERIALS UM1 NOTE: PRIMARY FIELD BRICK UM2 STACK BOND NOTE: SECONDARY COLOR MP1 07 4213.

14 45'-4" 47'-0" PARKING DECK SIDE EXIT TO WEAVER CROSSING OVERALL EAST ELEVATION 1/16" = 1'-0" 2 OVERALL WEST ELEVATION 1/16" = 1'-0" 1 50'-1 5/8" GENERAL NOTES: 1. FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISIONS BASED ON COMMENTS AND REQUESTS FROM THE TOWN OF CHAPEL HILL AS A PART OF THE SPECIAL USE PERMIT PROCESS. 2. FLOOR PLANS AND ELEVATIONS AS SHOWN ARE SUBJECT TO REVISION BASED ON COSTING EXERCISES. 3. PROTECT AREA OF WORK AND ADJACENT AREAS FROM DAMAGE. 4. DO NOT SCALE DRAWINGS. WRITTEN DIMENSIONS GOVERN. IN CASE OF CONFLICT, CONSULT THE ARCHITECT FOR DIRECTION. 5. INTERIOR PARTITIONS ARE DIMENSIONED FROM FINISH FACE TO FINISH FACE, UNLESS OTHERWISE NOTED. MAINTAIN DIMENSIONS MARKED CLEAR. ALLOW FOR THICKNESS OF FINISHED WALL MATERIAL WHEN LAYING OUT WALLS. REFER TO INTERIOR FINISH INFORMATION FOR WALL FINISH. 6. ALL INTERIOR DOORS TO BE LOCATED 6 OFF PERPENDICULAR WALL, UNO. DIMENSION TO INCLUDE INTERIOR FINISH MATERIALS. ALL DOOR CLEARANCES TO MEET ANSI A ACCESSIBLE CLEARANCES. 7. REFER TO THE OWNER FURNISHED OWNER INSTALLED LIST FOR EQUIPMENT TO BE INSTALLED BY OWNER S CONTRACTOR. PROVIDE CONCEALED BLOCKING AS REQUIRED FOR WORK BY OWNER S OTHER CONTRACTORS. COORDINATE WITH THE OWNER S CONTRACTORS THE SIZE, LOCATION, AND BLOCKING REQUIREMENTS. 8. PLUMBING AND ELECTRICAL UTILITY SERVICES SHOWN IN THE P AND E SERIES ONLY EXTENDS 5-0 OUTSIDE OF THE. GC RESPONSIBLE FOR FINAL COORDINATION OF THESE ELEMENTS IF SITE CONDITIONS VARY FROM THE CIVIL / LANDSCAPE DESIGN DOCUMENTS. NOTIFY ARCHITECT WITH ANY DISCREPANCIES OR ALTERATIONS TO THE DESIGN DOCUMENTS THAT RESULT FROM SITE CONDITIONS. 9. REFER TO CIVIL / LANDSCAPE DRAWINGS FOR FINAL GRADE ELEVATIONS AROUND. FINISH GRADE TO BE A MINIMUM OF 6 BELOW FINISH FLOOR LEVEL UNLESS NOTED OTHERWISE. DRAWING REFERENCES: 1. REFER TO G006 FOR TYPICAL INTERIOR MOUNTING S FOR TOILET ROOM ACCESSORIES, ELECTRICAL OUTLETS, DATA OUTLETS, FIRE ALARM, FIRE STROBE, THERMOSTATS, ETC. 2. REFER TO SHEET G200 FOR EXTERIOR WALL INFORMATION 3. REFER TO SHEET G210 FOR INTERIOR WALL INFORMATION. UNLESS NOTED OTHERWISE, ALL INTERIOR WALLS TO BE B1. ToCH BLDG HGT REQ'S - OI-3 TABLE DIMENSIONAL MATRIX (4/20/2017) ZONING DISTRICT OI-3 (F) PRIMARY N/A (G) (H) (I) (J) SECONDARY STREET INTERIOR SOLAR N/A 0' 0' 0' NOTE: DUE TO THE AND SOLAR REQUIREMENTS BEING N/A AND 0, THIS INFORMATION HAS NOT BEEN INCLUDED ON THE EXTERIOR ELEVATIONS AS IT HAS NO BEARING ON THE OVERALL DESIGN. FINISH LEGEND - EXTERIOR MATERIALS UM1 NOTE: PRIMARY FIELD BRICK UM2 STACK BOND NOTE: SECONDARY COLOR MP METAL COMPOSITE MATERIAL DESCRIPTION: Metal Composite Metal : Fire Retardant Core SIZE: Refer to Sections and Elevations THICKNESS: 0.157" Material, 2" Panel STYLE: Route and Return CW Glazed Aluminum Curtain Wall : RELIANCE-SS CASSETTE SIZE: 2 1/2" x 8" ES Entrances and Storefronts : SERIES 3000 THERMAL MULTIPLANE SIZE: 2" x 4 1/2" STYLE: FRONT SET - 1" GLAZING GL1 : SunGuard SNX 51/23 GL1* : SunGuard SNX 51/23 Apply Translucent Film on Surface 4 THESE DRAWINGS AND THE ACCOMPANYING SPECIFICATIONS ARE INSTRUMENTS OF SERVICE AND AS SUCH SHALL REMAIN THE PROPERTY OF THE ARCHITECT. THEY HAVE BEEN PREPARED FOR A SPECIFIC PROJECT AND SHALL NOT BE USED IN CONJUNCTION WITH ANY OTHER PROJECTS WITHOUT PRIOR WRITTEN PERMISSION OF THE ARCHITECT PIN: PITTSBORO -ASHEVILLE Job Number: WEAVER DAIRY SHELL OFFICE 1165 WEAVER DAIRY CHAPEL HILL, NC SAL 11/30/ COMPOSITE EAST + WEST ELEVATIONS A205

SPARTAN DAY CAMP 4814 FREEDOM RING RD

SPARTAN DAY CAMP 4814 FREEDOM RING RD 484 FREEDOM RING RD PROJECT DATA GENERAL PROJECT NOTES: LOCATION:. DIMENSIONS ARE TO FACE OF STUD OR TO COLUMN CENTERLINE UNLESS NOTED OTHERWISE. VERIFY ALL EXISTING CONDITIONS AND ADJUST WALL DIMENSIONS