84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don

Size: px
Start display at page:

Download "84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don"

Transcription

1 Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don't even need to sign-up. Just enjoy the course and drop me line if you found it useful. The full course itinerary can be viewed here Welcome to this Revit Zone article on Dimension types. In this article we are going to take a look at all the various types of dimensions that are available to you within Revit. For each dimension type, we will describe it s type and take a look at an example of it in use. In a separate article we will take a look at how you can customise the look of your dimensions (overriding the automatic values, for example). Please also note that this article focuses on permanent dimensions- as opposed to temporary dimensions, which will be discussed in a separate article. The dimension tools available to you can be found on the Annotate menu, in the Dimension tab.. 1 / 13

2 Aligned dimensions The first dimension type that we are going to look at are Aligned Dimensions. The key thing to note about Aligned Dimensions are that they can be placed between 2 or more parallel references or 2 or more points- wall ends for example. The dimensions in the image below are all Aligned Dimensions. 2 / 13

3 One important thing to note here is that when you select Aligned to start dimensioning, the Options bar presents you with some important choices that will aid you in creating your dimensions. You will see above that you have a choice as to what Revit snaps to when dimensioning. The Place Dimension drop down box contains Wall centrelines, Wall faces, Centre of core and Faces of core. The second choice you have when placing your dimensions are Pick. 3 / 13

4 At because If along we this leave a point wall this Pick it length- is is something worth set ie at from taking Individual that the a you moment end References, will of the use to wall look time to at and you the again. have start differences of the the choice first between window where these to opening. dimension two options to, However, the entire wall if you is change automatically Pick to dimensioned. Entire Walls, you can now just pick anywhere on the wall and Note Revit Options that exactly Bar all (this the what dimensions is elements only available were of the if added wall you you have in one wish Pick go, to be following set dimensioned, to Entire a single Walls. click on Options the wall. To on tell the You intersecting Imagine a single will see click! a long grid that Ok, elevation lines. you that s can Used enough with dimension appropriately, 14 of windows Aligned (automatically) and this Dimensions, 3 feature doors- to openings, can and let s save being move you intersecting able on. a vast to dimension amount wall and of all time. of it with Linear dimensions Next on our list are Linear Dimensions. We use Linear Dimensions, when we want the absolute distance (measured vertically or horizontally) between two offset points. This is better explained with a diagram. 4 / 13

5 Angular dimensions As you may expect, Angular Dimensions are used to measure the angle between two reference points that share a common intersection. Quite simply click on the first reference element (be it a line, wall, etc) and then on the second one. Radial dimensions Radial dimensions are used for measuring the distance from an arc to it s centre point. In the case of Walls, you can measure either to the wall centreline or the wall face. Pressing the tab key when defining your dimension will toggle between wall face and wall centreline. 5 / 13

6 Arc Length dimensions Radial dimensions are used for measuring the distance along an arc segment. This could be a line or wall. Again the Tab key will toggle between centrelines and faces, in the case of walls. 6 / 13

7 Baseline and Ordinate dimensions Two other linear dimension types that are available to you (but not obviously evident) are Baseline and Ordinate dimensions. These are basically two different types of Running Dimensions. In order top use these, you will need to first create the dimension types. This is really easy to do- just pick the default Linear (or Aligned) dimension family and duplicate it (renaming it of course). Once you have a copy of the family, you can go into it s properties and Edit Type.. 7 / 13

8 You will notice that the first parameter in the list is Dimension String Type. This is the parameter we are interested in. If you activate the drop-down menu for this parameter- you will see that you have a choice of Continuous, Baseline or Ordinate. Go ahead and change the parameter to Baseline. This results in a dimension like this. And if then produce a second dimension family with the Dimension String Type set to Ordinate, this is what you get. 8 / 13

9 On you the will face see that of it this each looks dimension just like value a standard is measured aligned back / linear to the dimension. base point But of if 0. you look closely Spot Dimensions. There are 3 types of Sot Dimensions: Spot Elevations, Spot Coordinates and Spot Slopes Spot Elevation dimensions Spot Elevations are used in elevation, section, plan and 3D views to display the absolute (or relative) heights of reference points. They can also display the upper and lower height values of an element with thickness (eg a floor), in plan views. 9 / 13

10 Here is a Spot Elevation in a section view, telling us the height at the top of the wall And here is a Spot Elevation in a plan view. This time it is displaying the bottom and top heights of a floor plate element.. 10 / 13

11 Spot Coordinates dimensions Spot Coodinates display the North / South and East / West coordinates of the reference point it is placed at. It can also display the elevation at that height too. Spot Slope dimensions 11 / 13

12 And finally.. Spot Slope Dimensions! As you might well expect, these are used for displaying the angle of slope on various surfaces and elements. They can be placed in section, elevation and plan views. Here is one being used on a roof slope in a section view.. You have a choice of an arrow or a triangle for the symbol- we have obviously chosen the triangle symbol in the above example. And that concludes our introductory look at Dimensions in Revit. In other articles we will go onto to look at how we can manipulate and customise the look and operation of these various dimension types. 12 / 13

13 13 / 13

84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don

84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions.

More information

84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don

84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions.

More information

Architecture 2012 Fundamentals

Architecture 2012 Fundamentals Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit

More information

Tutorial 2: Setting up the Drawing Environment

Tutorial 2: Setting up the Drawing Environment Drawing size With AutoCAD all drawings are done to FULL SCALE. The drawing limits will depend on the size of the items being drawn. For example if our drawing is the plan of a floor 23.8m X 15m then we

More information

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model

More information

An Introduction to Dimensioning Dimension Elements-

An Introduction to Dimensioning Dimension Elements- An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements

More information

Drawing with precision

Drawing with precision Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial

More information

Dimensioning. Subject Matters:

Dimensioning. Subject Matters: Objectives: To define dimensioning. To recognise the different types of dimensions. To define and create a dimension style. To recognise the dimension toolbar and the dimensioning commands. To create dimensions

More information

AutoDesk Inventor: Creating Working Drawings

AutoDesk Inventor: Creating Working Drawings AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working

More information

Revit Structure 2013 Basics

Revit Structure 2013 Basics Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial

More information

Revit Structure 2012 Basics:

Revit Structure 2012 Basics: SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural

More information

Dimension Styles. EDT Chapter 18 - Basic Dimensioning Practices 1

Dimension Styles. EDT Chapter 18 - Basic Dimensioning Practices 1 Dimension Styles EDT 310 - Chapter 18 - Basic Dimensioning Practices 1 Dimension Styles The appearance of dimensions is controlled by over 70 different settings. Dimension Styles are saved configurations

More information

Ribbon (Panels) + Options Bar + Contextual Tabs (tools based on selection)

Ribbon (Panels) + Options Bar + Contextual Tabs (tools based on selection) Week 11 Revit, Basics Building Information Modeling (BIM) - Parametric 3D Model File Types: Projects RVT (template = RTE) Families - RFA (template = RFT), "Symbols" Layout Workspace - Elevation Markers

More information

OF LEVELS & ADJUSTMENTS TO THE GRID. Bldg: Levels. PROF. PAUL C. KING RA New York City College of Technology. Learning Community.

OF LEVELS & ADJUSTMENTS TO THE GRID. Bldg: Levels. PROF. PAUL C. KING RA New York City College of Technology. Learning Community. Bldg: Levels DEVELOPMENT OF LEVELS & ADJUSTMENTS TO THE GRID Overview: The existing drawing includes 2 levels set 10' apart. For the Lab Building we need to createe a total of 6 levels with a vertical

More information

Making an Architectural Drawing Template

Making an Architectural Drawing Template C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards:! Starting from Scratch for the Last time! Creating

More information

Roof Tutorial Wall Specification

Roof Tutorial Wall Specification Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other tutorials.

More information

MWF Rafters. User Guide

MWF Rafters. User Guide MWF Rafters User Guide September 18 th, 2018 2 Table of contents 1. Introduction... 3 1.1 Things You Should Know Before Starting... 3 1.1.1 Roof Panels Structure Orientation... 3 1.1.2 Member Selection...

More information

ArchiCAD Tutorial: How to Trace 2D Drawings to Quickly Create a 3D Model

ArchiCAD Tutorial: How to Trace 2D Drawings to Quickly Create a 3D Model ArchiCAD Tutorial: How to Trace 2D Drawings to Quickly Create a 3D Model Hello, this is Eric Bobrow of Bobrow Consulting Group, creator of the ArchiCAD MasterTemplate with another ArchiCAD video tip. In

More information

1: INTRODUCTION TO AUTOCAD

1: INTRODUCTION TO AUTOCAD AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu

More information

Landscaping Tutorial

Landscaping Tutorial Landscaping Tutorial This tutorial describes how to use Home Designer Architectural s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features,

More information

Applications in Technical Drawing

Applications in Technical Drawing Applications in Technical Drawing Objectives: To use drawing aids in orthographic projection. To recognise the use of construction line in orthographic projection. To locate points using OSNAP and OTRACK.

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

SMALL OFFICE TUTORIAL

SMALL OFFICE TUTORIAL SMALL OFFICE TUTORIAL in this lesson you will get a down and dirty overview of the functionality of Revit Architecture. The very basics of creating walls, doors, windows, roofs, annotations and dimensioning.

More information

Rhinoceros modeling tools for designers. Using Layouts in Rhino 5

Rhinoceros modeling tools for designers. Using Layouts in Rhino 5 Rhinoceros modeling tools for designers Using Layouts in Rhino 5 RH50-TM-LAY-Apr-2014 Rhinoceros v5.0, Layouts, Training Manual Revised April 8, 2014, Mary Fugier mary@mcneel.com Q&A April 8, 2014, Lambertus

More information

This section will take you through the process of drawing an oblique block. Your entire part, in all views, should look like Figure 1.

This section will take you through the process of drawing an oblique block. Your entire part, in all views, should look like Figure 1. Oblique Block Preface This section will take you through the process of drawing an oblique block. Your entire part, in all views, should look like Figure 1. Figure 1 68 / 3D Scripted Drawings: Oblique

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

14 - Dimensioning. Dimension Styles & settings. Arrows tab.

14 - Dimensioning. Dimension Styles & settings. Arrows tab. 14 - Dimensioning Dimensioning is always a complex topic in any CAD system because there are so many options and variables to deal with. progecad collects all the numerous settings together in the Dimension

More information

Making an Architectural Drawing Template

Making an Architectural Drawing Template C h a p t e r 8 Addendum: Architectural Making an Architectural Drawing Template In this chapter, you will learn the following to World Class standards: 1. Starting from Scratch 2. Creating New Layers

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques

More information

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:

Learning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax: Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013

More information

Autodesk Medical Center

Autodesk Medical Center Autodesk Medical Center Page 1 Contents Autodesk Medical Center... 1 Revit Projects... 3 Exercise 1 Create a new project file... 3 Datum Elements... 4 Exercise 2 Add Grids... 5 Exercise 3 Edit Levels...

More information

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan

Landscaping Tutorial. Adding a Driveway Adding Library Objects to Your Plan Landscaping Tutorial This tutorial describes how to use Home Designer Pro s Terrain Tools. In it, you will learn how to add elevation information to your terrain, how to create terrain features, and how

More information

Making a Custom Symbol. Making a Custom Symbol in Chief Architect

Making a Custom Symbol. Making a Custom Symbol in Chief Architect TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

Revit Structure 2014 Basics

Revit Structure 2014 Basics Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit

More information

Making a Drawing Template

Making a Drawing Template C h a p t e r 8 Addendum: Metric Making a Drawing Template In this chapter, you will learn the following to World Class standards: 1. Starting from Scratch 2. Creating New Layers in an progecad Drawing

More information

S206E Lecture 6, 5/18/2016, Rhino 3D Architectural Modeling an overview

S206E Lecture 6, 5/18/2016, Rhino 3D Architectural Modeling an overview Copyright 2016, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2016 This tutorial is to introduce a basic understanding on how to apply visual projection techniques of generating a 3D model based

More information

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011

AutoCAD 2D I. Module 16. Isometric and Dimensioning. IAT Curriculum Unit PREPARED BY. January 2011 AutoCAD 2D I Module 16 Isometric and Dimensioning PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 16 Auto CAD Self-paced Learning Modules AutoCAD 2D Isometric

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Chapter 6 Title Blocks

Chapter 6 Title Blocks Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers

More information

Modeling 2. Draw Storefront Curtain Wall. Align. Draw Storefront Curtain Wall

Modeling 2. Draw Storefront Curtain Wall. Align. Draw Storefront Curtain Wall STEP 1: Back to your Revit fi le _ from the Project Browser double-click on Level 1 _ type shortcut WA (wall) _ set the type of wall to Storefront _ draw a curtain wall on the South Wall as shown in image

More information

ARCHICAD Introduction Tutorial

ARCHICAD Introduction Tutorial Starting a New Project ARCHICAD Introduction Tutorial 1. Double-click the Archicad Icon from the desktop 2. Click on the Grey Warning/Information box when it appears on the screen. 3. Click on the Create

More information

Advance Concrete. Tutorial

Advance Concrete. Tutorial Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances

More information

Lesson 16 Helical Sweeps and Annotations

Lesson 16 Helical Sweeps and Annotations Lesson 16 Helical Sweeps and Annotations Figure 16.1 Helical Compression Spring Drawing OBJECTIVES Create a helical compression spring with a Helical Sweep Use sweeps to create hooks on extension springs

More information

Vectorworks / MiniCAD Tutorials

Vectorworks / MiniCAD Tutorials Vectorworks / MiniCAD Tutorials Tutorial 1: Construct a simple model of a little house Tutorial 2: Construct a 4 view Orthographic drawing of the Model These tutorials are available as Adobe Acrobat 4

More information

Stratigraphy Modeling Boreholes and Cross Sections

Stratigraphy Modeling Boreholes and Cross Sections GMS TUTORIALS Stratigraphy Modeling Boreholes and Cross Sections The Borehole module of GMS can be used to visualize boreholes created from drilling logs. Also three-dimensional cross sections between

More information

Advance Dimensioning and Base Feature Options

Advance Dimensioning and Base Feature Options Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch

More information

Getting Started with. Vectorworks Architect

Getting Started with. Vectorworks Architect Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program

More information

Isometric Drawings. Figure A 1

Isometric Drawings. Figure A 1 A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Autodesk AutoCAD Architecture 2015 Fundamentals

Autodesk AutoCAD Architecture 2015 Fundamentals Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the

More information

06/17/02 Page 1 of 12

06/17/02 Page 1 of 12 Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive

More information

Converting a solid to a sheet metal part tutorial

Converting a solid to a sheet metal part tutorial Converting a solid to a sheet metal part tutorial Introduction Sometimes it is easier to start with a solid and convert it to create a sheet metal part. This tutorial will guide you through the process

More information

New Sketch Editing/Adding

New Sketch Editing/Adding New Sketch Editing/Adding 1. 2. 3. 4. 5. 6. 1. This button will bring the entire sketch to view in the window, which is the Default display. This is used to return to a view of the entire sketch after

More information

Training Guide 1 Basic Construction Overview. (v1.1)

Training Guide 1 Basic Construction Overview. (v1.1) Training Guide 1 Basic Construction Overview (v1.1) Contents Training Guide 1 Basic Construction Overview... 1 Creating a new project... 3 Entering Measurements... 6 Adding the Walls... 10 Inserting Doors

More information

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

AutoCAD Civil 3D 2009 ESSENTIALS

AutoCAD Civil 3D 2009 ESSENTIALS AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how

More information

House Design Tutorial

House Design Tutorial Chapter 2: House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.

Dean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices. Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

SolidWorks 95 User s Guide

SolidWorks 95 User s Guide SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents

More information

Kitchen and Bath Design Tutorial

Kitchen and Bath Design Tutorial Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.

More information

Landscaping Tutorial. Chapter 5:

Landscaping Tutorial. Chapter 5: Chapter 5: Landscaping Tutorial This tutorial was written to help you learn how to use Home Designer Landscape and Deck s Terrain tools. In this tutorial, you will learn how to add elevation information

More information

[EC202 AutoCAD Topic Dimension] DEC 2010

[EC202 AutoCAD Topic Dimension] DEC 2010 DIMENSIONING OBJECTIVES At the end of the unit you will be able to: Create linear dimensions with DIMLINEAR, DIMCONTINUE, DIMBASELINE, DIMALIGNED. Create radial dimensions with DIMDIAMETER and DIMRADIUS.

More information

CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...

CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

METAL FRAMING Wall+ SHOP DRAWINGS

METAL FRAMING Wall+ SHOP DRAWINGS METAL FRAMING Wall+ SHOP DRAWINGS Shop Drawings Finish your modeling with built-in shop drawing generator and deliver your wall framing estimation the same hour. Build your complete shop drawings with

More information

Corridors. To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.

Corridors. To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Corridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment: (1) Alignments > Create

More information

Revit Architecture Student Workbook

Revit Architecture Student Workbook Revit Architecture Student Workbook Building Information Modeling with Revit Architecture Contents Introduction... 5 Unit 1... 9 Theory: CAD Versus BIM... 9 Revit Architecture: Introduction, Interface,

More information

Stratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS

Stratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Boreholes and Cross Sections Become familiar with boreholes and borehole cross sections in GMS Objectives Learn how to import borehole data, construct a

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2017 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Step-by-Step Tutorial: Applying Dimensional Constraints

Step-by-Step Tutorial: Applying Dimensional Constraints New Commands in AutoCAD 2010: Part 1 Dimensional Constraints, Part 1 by Ralph Grabowski Introduction One of the really significant new features of AutoCAD 2010 is parametric drafting. This technology allows

More information

AreaSketch Pro Overview for ClickForms Users

AreaSketch Pro Overview for ClickForms Users AreaSketch Pro Overview for ClickForms Users Designed for Real Property Specialist Designed specifically for field professionals required to draw an accurate sketch and calculate the area and perimeter

More information

Autodesk Architectural Desktop Functionality for the Autodesk Building Systems User

Autodesk Architectural Desktop Functionality for the Autodesk Building Systems User 11/28/2005-1:00 pm - 2:30 pm Room:N. Hemispheres (Salon A1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Architectural Desktop Functionality for the Autodesk Building Systems

More information

AutoCAD Architecture 2018 Fundamentals

AutoCAD Architecture 2018 Fundamentals Elise Moss Autodesk AutoCAD Architecture 2018 Fundamentals SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites

More information

DeltaCad and Your Cylinder (Shepherd s) Sundial Carl Sabanski

DeltaCad and Your Cylinder (Shepherd s) Sundial Carl Sabanski 1 The Sundial Primer created by In the instruction set SONNE and Your Cylinder Shepherd s Sundial we went through the process of designing a cylinder sundial with SONNE and saving it as a dxf file. In

More information

Autodesk Advance Steel. Drawing Style Manager s guide

Autodesk Advance Steel. Drawing Style Manager s guide Autodesk Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction... 5 Details and Detail Views... 6 Drawing Styles... 6 Drawing Style Manager... 8 Accessing the Drawing Style

More information

CHAPTER 15. Cross Section Sheets. None, except batch processing of an input file.

CHAPTER 15. Cross Section Sheets. None, except batch processing of an input file. CHAPTER 15 Cross Section Sheets 15.1 Introduction Objectives Project Manager Menu Bar Application Learn the procedures for laying out cross section sheets. Cross Section Sheets None, except batch processing

More information

Walls. Section. Walls. When you finish this section, you should understand the following:

Walls. Section. Walls. When you finish this section, you should understand the following: GOLDMC03_132283433X 8/24/06 2:23 PM Page 123 Section 3 Walls When you finish this section, you should understand the following: How to place a wall object. How to change walls by dynamically pulling on

More information

BIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010

BIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010 BIM e Submission Guideline Structural Annex 1a Recommended Process Revit 2010 Building and Construction Authority 5 Maxwell Road #16-00 Tower Block MND Complex Singapore 069110 www.bca.gov.sg Revision

More information

Using Dynamic Views. Module Overview. Module Prerequisites. Module Objectives

Using Dynamic Views. Module Overview. Module Prerequisites. Module Objectives Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;

More information

AutoCAD LT Drawing Formats

AutoCAD LT Drawing Formats AutoCAD LT Section 5 AutoCAD LT Drawing Formats This section covers: 1. Layers 2. Colors 3. Linetypes 4. Units 5. Text Styles 6. Dimension Styles 7. Point Styles AutoCAD LT Introduction AutoCAD LT Drawing

More information

House Design Tutorial

House Design Tutorial House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a

More information

Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013

Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013 Level of Difficulty SketchUp An Introduction to Architectural Design Time Approximately 60 75 minutes Photocopiable/digital resources may only be copied by the purchasing institution on a single site and

More information

Advance Steel. Drawing Style Manager s guide

Advance Steel. Drawing Style Manager s guide Advance Steel Drawing Style Manager s guide TABLE OF CONTENTS Chapter 1 Introduction...7 Details and Detail Views...8 Drawing Styles...8 Drawing Style Manager...9 Accessing the Drawing Style Manager...9

More information

Opening the Door to Curtain Walls in AutoCAD Architecture, Part I

Opening the Door to Curtain Walls in AutoCAD Architecture, Part I Opening the Door to Curtain Walls in AutoCAD Architecture, Part I David Driver, President 4D Architects, Ltd. AB210-3 This class gives you a kit of parts and a set of rules methodology for understanding

More information

Number Object Category Attribute Name Explanation Examples Further comments

Number Object Category Attribute Name Explanation Examples Further comments 1 STORY 2 GRID 3 COLUMN 2 Story Elevation Absolute elevation for story (the name "story" is prefered over "level", as level is used in e.g. Revit Typically, our elevations for a project are all relative

More information

Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder

Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder Inventor (10) Module 1E: 1E- 1 Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder In this Module, we will explore the topic

More information

Tutorial Building the Nave Arcade

Tutorial Building the Nave Arcade Tutorial: Digital Gothic AH C117B (Winter 2017) Tutorial Building the Nave Arcade Overview: Step 1: Determining and Drawing The Arch (Quinto Arch) Step 2: Extrude Molding Profile Step 3: Adding Walls Step

More information

Modeling Basic Mechanical Components #1 Tie-Wrap Clip

Modeling Basic Mechanical Components #1 Tie-Wrap Clip Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely

More information

DESIGN AND MODELLING OF ORPHAN HOME

DESIGN AND MODELLING OF ORPHAN HOME DESIGN AND MODELLING OF ORPHAN HOME B.T.Shyamala 1,M.Manoj Kumar 2 1 Asst Professor,CIVIL, Dr.KV Subba Reddy College Of Engineering For Women,Kurnool,Andhrapradesh,India. 2 Asst Professor,CIVIL, Dr.KV

More information

EG1003 Help and How To s: Revit Tutorial

EG1003 Help and How To s: Revit Tutorial EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,

More information

How to Draw a New York Beauty Block

How to Draw a New York Beauty Block How to Draw a New York Beauty Block We start by opening the Block Wizard. Click Options, Screen settings. In the Grid tab, choose Circular for the Grid Type. Set the Size to be.50 Number of Rings: 15 Radials:

More information

ACAD-BAU TUTORIAL For BricsCAD platform

ACAD-BAU TUTORIAL   For BricsCAD platform ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.

More information

Las Vegas, Nevada November 27-30, 2001

Las Vegas, Nevada November 27-30, 2001 Las Vegas, Nevada November 27-30, 2001 Speaker Name: Phil Leverault Course Title: Conquering Dimensions Course ID: Course Outline: Factors to Consider for Dimension Styles Discipline Mechanical Dimensioning

More information

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION

Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000

More information

Assignment 5 CAD Mechanical Part 1

Assignment 5 CAD Mechanical Part 1 Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started

More information

Chief Architect New Feature List

Chief Architect New Feature List SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files

More information

Assignment 10 Revit CAD Fundamentals I Due March 29 Architecture 411

Assignment 10 Revit CAD Fundamentals I Due March 29 Architecture 411 Due March 29 Architecture 411 Objectives To learn the basic concepts involved with Building Information Modeling. To become familiar with basic operation of the Revit user interface. To learn techniques

More information