Client : NRF (National Research Foundation) Project : HERA Type : DRAWING DATAPACK PVC MANUFACTURING DATAPACK
|
|
- Logan Austin
- 5 years ago
- Views:
Transcription
1 Client : NRF (National Research Foundation) Project : HERA Type : DRAWING DATAPACK PVC MANUFACTURING DATAPACK Document number... H Revision... 1 Classification... Commercial in Confidence Author... K A Rosie Date March 2017
2 H Commercial In Confidence Revision: 1 DOCUMENT APPROVAL Name Designation Affiliation Date Signature Submitted K Rosie Design Engineer SKA SA Kathryn Rosie Kathryn Rosie (Mar 29, 2017) Reviewed Z Halday HERA Project Manager SKA SA Approved D DeBoer HERA Project Manager UCB Ziyaad Halday Ziyaad Halday (Mar 30, 2017) David DeBoer David DeBoer (Mar 30, 2017) DOCUMENT HISTORY Revision Date Of Issue ECN Number Comments 1 17 March 2017 N/A 1 st Release for Bid Purposes / Information Only DOCUMENT SOFTWARE Package Version Filename CAD Package Autodesk Inventor 2017 SKA_SA.idw COMPANY DETAILS Name Square Kilometre Array South Africa Third Floor The Park Physical/Postal Park Road Address Pinelands 7405 Tel Fax Website Commercial In Confidence Page 2 of 10
3 Ø ) All dims in mm unless otherwise stated 2) All tolerances ±1mm unless otherwise stated 3) Ends to be square and chamfered for solvent weld connection 4) NB: Ensure that the ends of the pipe do not exceed the specified diameter KA ROSIE 2016/04/11 HORIZONTAL HUB SPAR MATL: DIA. 63mm CLASS 12 upvc 1:5 H1HU B
4 Ø All dims in mm unless otherwise stated 2. All tolerances ±1mm unless otherwise stated 3. NB: Ensure that the ends of the pipe do not exceed the specified diameter KA ROSIE 2016/04/21 HUB SLEEVE MATL: DIA. 90mm CLASS 9 upvc 1 / 2 H1HS B
5 (515) 1) All dimensions in mm unless otherwise specified 2) All linear tolerances ±1mm unless otherwise specified 3) All angular tolerances within 0.2 unless otherwise specified KA ROSIE 2016/06/03 SUPPORT SPAR UPRIGHT MATL: 63mm CLASS 12 upvc 1 / 2.1 H1PV-P C
6 Ø63 6m STD. LENGTH 1. All dimensions in millimetres unless otherwise specified 2. All tolerances ±1mm unless otherwise specified 3. One end to be square and chamfered for solvent weld connection 4. Other end to contain unmodified bell-shaped socket KA ROSIE 2017/03/09 LONG SPAR MATL: 63mm DIA. CLASS 12 upvc, 6m STD. LENGTH 1 / 2 H1RF-L A
7 Ø All dimensions in millimetres unless otherwise specified 2. All tolerances ±1mm unless otherwise specified 3. Both ends to be square and chamfered for solvent weld connection KA ROSIE 2017/03/09 SHORT SPAR MATL: 63mm DIA. CLASS 12 upvc 1 / 2 H1RF-S A
8 Ø63 6.0m 5.9m 1. All dimensions in millimetres unless otherwise specified 2. All tolerances ±1mm unless otherwise specified 3. Both ends to be square and chamfered for solvent weld connection. MATL: 63mm DIA. CLASS 12 mpvc, 6m STD. LENGTH KA ROSIE 2017/03/09 INTERMEDIATE SPAR 1 / 2 H1RI A
9 Ø63 1. All dimensions in mm unless otherwise specified 2. All tolerances ±1mm unless otherwise specified 3. Final length of Item 2 depends on insertion length of Item 1 ITEM 1 2 QTY 1 2 PART # COTS H1RC-C PARTS LIST DESCRIPTION 63mm upvc Solvent Weld Equal Tee Cross Piece, cut according to dims (476) 75 KA ROSIE 2016/06/07 FULL INSERTED AND GLUED (PVC WELD) NB: T-PIECE VERTICAL WITH RESPECT TO CUT ENDS AS SHOWN 63mm upvc SOLVENT WELD EQUAL TEE MATL: DIA. 63mm CLASS 12 upvc CROSS-SPAR SUB ASSEMBLY 1 / 4 H1RC D
10 Ø All dimensions in mm unless otherwise specified 2. All linear tolerances ±1mm unless otherwise specified 400 KA ROSIE 2017/03/16 D DEBOER POST BASE FORMS MATL: DIA. 400mm CLASS 6 upvc 1/4 H1PS-F B
TRIAL EXAMINATION 2012
ENGINEERING GRAPHICS AND DESIGN - TRIAL PAPER TWO - 0 education Department: Education KwaZulu - Natal GRADE ENGINEERING GRAPHICS AND DESIGN P TRIAL EXAMINATION 0 S : 00 TIME : HOURS This question paper
More informationA - Railing Frame Material Specifications
A - Railing Frame Material Specifications NOTE: We strongly recommend stainless steel for exterior applications. R-1 8/1/02 B Stainless Steel Spacers (For Horizontal Railing Double Post End Post using
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More informationRiser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18 Manual 40100X35-8 3 2 4 Access covers with bolts supplied with Interceptor 1 5 14 6 11 15 Sampling Port/Cleanout cap supplied with Interceptor 12
More informationOverview of Textron Systems Supplier First Article Inspection (FAI) expectations
Overview of Textron Systems Supplier First Article Inspection (FAI) expectations See your Supplier Quality Engineer with questions PURPOSE Ensure the product being delivered meets drawing requirements
More informationOff Road. PedGuard. Barrier systems for use in off road applications, providing a low energy vehicle impact deterrent.
Barrier systems for use in off road applications, providing a low energy vehicle impact deterrent. The total solution in barrier systems Off Road PedGuard Information Book > Beams C35 Slotted Angle Beam
More informationDETAIL SPECIFICATION SHEET FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; REDUCING COUPLING, BUSHING, AND ADAPTER, PIPE
INCH-POUND MIL-DTL-1183/8B 20 December 2016 SUPERSEDING MIL-F-1183/8A 5 May 1987 DETAIL SPECIFICATION SHEET FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; REDUCING COUPLING, BUSHING, AND ADAPTER, PIPE This
More informationTriangle Triumph Game Elements. Table of Contents
CAppendix JR. Triangle Triumph Game Elements Table of Contents Appendix C Triangle Triumph Playing Field...2 C.1 Description...2 C.2 Bill of Materials...2 C.3 Rack Bases...3 C.4 Rack System...4 C.5 Central
More informationTROPOSPHERIC CHARACTERISATION OF SKA SITES
TROPOSPHERIC CHARACTERISATION OF SKA SITES Document number... WP3 040.020.000 R 001 Revision... 2 Author... R.P. Millenaar Date... 2011 02 09 Status... Approved for release Name Designation Affiliation
More informationINTRODUCTION PROPERTIES
INTRODUCTION T he experience and success of the present day Nepro factory is based on its inception in 1968 to be the leading, specialized manufacturer and supplier of PVC, CPVC pipes and fittings. Now,
More informationDUE DATE: Friday 4/6/2018 at 3:30 PM
MECH 130 SPRING 2018 CAD LAB 4 FINAL REVISION HARDCOPIES NEEDED DUE DATE: Friday 4/6/2018 at 3:30 PM After the revised hitch, the ball and the pin parts were created from the Handout call LAB4 PART Creation,
More informationType A. BWSC CAD Standards for Site Plans (Design and As-Built) Format. Scale. Fonts, Linetypes, Shapes
BWSC CAD Standards for Site Plans (Design and As-Built) Type A The following CAD standards are for Type A application and involve no work in Public Street, except for connection(s) to the Boston Water
More information4/21/2011. Working Drawings. Working Drawings. Working Drawings. Detail Drawings. Section Assembly. Orthographic Assembly Drawing
Working Drawings The Working drawings provide all of the specifications for the manufacture of a design. Working Drawings It is imperative that they describe all components completely and not contain any
More informationNORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES
"B" B. C. PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES PVC - DWV PIPE FITTINGS FOR "X" SOC. HD. SCREW (N) HOLES "D" "C" "A" O.D. ALTER IF CONSTRAINED BY SPACE LIMITATION. (2) MIN. FASTENING HOLES REQUIRED.
More informationLtd.) is India s leading manufacturer of PVC-U Pipes & Fittings. Our pipes & fittings are available in a vast range of sizes.
+91-8042952415 Finolex Pipes & Fittings (Unit Of Finolex Industries Limited) https://www.indiamart.com/finolex-pipes-fittings/ Finolex Pipes & Fittings (Unit Of Finolex Industries Ltd.) is India s leading
More informationNORTH AMERICA ONLY GUIDELINES FOR DIES WITH PIERCING OPERATIONS
GUIDELINES FOR DIES WITH PIERCING OPERATIONS 1.0 APPLICATION OF THE STANDARD THE FOLLOWING GUIDELINES APPLY TO ALL DIES WITH PIERCING OPERATIONS, E.G. BLANK, TRIM, PIERCE AND CAM DIES. 2.0 GENERAL INFORMATION
More informationPURESTREAM SYSTEM - ASSEMBLY GUIDE
PURESTREAM SYSTEM - ASSEMBLY GUIDE VISIT OUR WEBSITE : www.cagpurification.com our installment procedure videos in the PURESTREAM Piping section. NECESSARY TOOLS FOR INSTALLATION We suggest the use of
More informationDurapipe ABS Jointing Guide
Durapipe ABS Jointing Guide Solvent cement welding offers a simple and quick means of constructing high integrity, leak-free joints. The solvent cement operates by chemically softening the joint surfaces.
More informationReal Life Ninja Complete Starter Pack (14ft. Warped Wall) Assembly Instructions
MATERIALS: 3 - Main Sections (Only 2 Sections for 10 ) 8 3 deck screws for joining sections inside of 2 Rock Wall Panels (with pre-installed t-nuts. Top panel comes with ladder mounting block preinstalled.)
More informationAutodesk Inventor Module 17 Angles
Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,
More informationConvex Strainers DN PN 80, 100, 200
55 Convex Strainers DN 400-1000 PN 80, 100, 200 Designed for protection of compressor rotor bundle against foreign-object damage. Working medium is non-aggressive natural gas and other non-aggressive media
More informationInstallation and Operational Instructions for ROBA -DS couplings Type 95. _ (disk pack HF) Sizes
95. _ (disk pack HF) Sizes 6 22 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting
More information10 PVC Tree Instructions
10 PVC Tree Instructions Bill of materials Item QTY Material Description 1 1 Standard Hook Head 2 1 Metal 1 1/4" 5 way cross Parts for PVC Base 3 50 3/4 Spears Snap-on tee(2 Extra) 4 4 3/4 Dura Snap-on
More informationJULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
More informationMISCELLANEOUS CORRECTIONS TO THE BASELINE DESIGN
MISCELLANEOUS CORRECTIONS TO THE BASELINE DESIGN Document number... SKA-TEL.SKO-DD-003 Revision... 1 Author...R.McCool, T. Cornwell Date... 2013-10-27 Status... Released Name Designation Affiliation Date
More informationWASHING MACHINE AND WASHER-DRIER
GB 99-11-03/01 1-14 Index 1 CONFORMITY OF APPLIANCE 3 2 DIMENSIONS OF WASHING MACHINE/WASHER-DRIER AND HOUSING SPACE 3 3 UNPACKING 4 4 LEVELLING 5 5 FITTING THE FRONT PANEL AND INSERTING THE MACHINE INTO
More informationFreestanding Shelving System
Freestanding Shelving System Freestanding Shelving System Ready Made Solutions Freestanding Shelving System Our Free Standing Shelving System originates from Sparring and offers an easy to install and
More informationThe Safe Solution for Stainless Steel Balustrade Systems
M E R G I N G S A F E T Y W I T H S T Y L E The Safe Solution for Stainless Steel Balustrade Systems KEE STAINLESS is the most exclusive product in the Kee Safety handrail and balustrade product range.
More informationGo Figure RPD07. Configurable Light Sculptures Suspended or Surface ǀ LED
Go Figure RPD07 Configurable Light Sculptures Suspended or Surface ǀ LED Go Figure RPD07 Configurable Light Sculptures ǀ Surface or Suspended ILLUMINATED SECTION DETAIL 2 in 1 in Vertical Section Front
More informationFabricated Structural Steelwork. Section 8
Fabricated Structural Steelwork Section 8 INDEX DESCRIPTION FIGURE No. PAGE Pipe Shoe Welded Pipe Shoe Welded (Heavy Duty) Pipe Shoe Clamped Pipe Shoe Clamped (Heavy Duty) Inverted Tee Post Upright Tee
More informationSECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3
C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
More informationPLASTIC PIPE WELDING PLASTIC PIPE WELDING
PLASTIC PIPE WELDING PLASTIC PIPE WELDING Plastic Pipe Welding Electric sleeve welding unit 222 Sleeve welding units 223 Butt welding machines 224 Butt welding units 228 REMS EMSG 160 Electric sleeve welding
More informationSERIES KC RELAY NONLATCH 3PDT, 25 AMP
All welded construction Contact arrangement 3 PDT configuration in one inch cube Qualified to MIL-PRF-83536 PRINCIPLE TECHNICAL CHARACTERISTICS Applicable sockets: SO-1057-8912 Contacts rated at 28 Vdc;
More informationProduct Guide Specification
Zurn Industries, LLC November 2014 1801 Pittsburgh Avenue Erie, PA 16502 Toll Free (855) 663-9876 Phone (814) 455-0921 Fax (814) 871-6141 Website www.zurn.com Product Guide Specification Specifier Notes:
More informationma output signal with transmitter module. - Adjustable frequency output signal with pulse divider module
/ - ; 0 PSI Advantages / Benefits Wireless easy mounting and dismounting of sensor head by a Turn & Lock technique 3-wire Hall version to interface directly with PLC's (both NPN and PNP) Easy to connect:
More informationProject 8.1a Model A Button Maker
Page 1 of 16 Project 8.1a Model A Button Maker Introduction Interpreting dimensioned drawings is an important engineering skill. Using drawings to create a computer model of a part is also important. You
More informationFEATURES ± [0.64 ± 0.05] dia. (no. 22 AWG) tinned nickel leads solderable and weldable
SuperTan Wet Tantalum Capacitors s capacitor represents a major breakthrough in wet tantalum technology. Its unique cathode system provides the highest capacitance per unit volume. The design facilitates
More information5G350 Nominal 33W 5G530 Nominal 48W 5G700 Nominal 64W 5G105 Nominal 97W 5G140 Nominal 126W K K. 1 DM or HL only. Cannot be combined.
Project: Type: Qty: BLL _ Series Mounting Optics Light Engine CCT Finish Voltage Options _ Pole Series Height Finish Pole Options Series Mounting Optics Light Engine CCT Finish Voltage Options BLL Beta
More informationTOS KUŘIM - OS, a.s., February 2012 MOVABLE, INDEXING TABLE WITH VTL ABILITY KES / KEP
TOS KUŘIM - OS, a.s., February 2012 MOVABLE, INDEXING TABLE WITH VTL ABILITY KES / KEP Examples of use Examples of use with gantry type machining centres and floor type machining centres Gantry type machining
More informationRISER & LATERAL SYSTEM
Installation & Operation Instructions RISER & LATERAL SYSTEM External Polyethylene (PE) Sizes 63mm CONTENTS 3. General notes 4. 63mm riser arrangement 5. Location and installation of fitting (stage 1)
More informationSUBMITTAL REVIEW B Passenger Elevators Shop Drawings GCAN
SUBMITTAL REVIEW Submittal: No. 008 Spec Section: 14 2010 Passenger Elevators Reviewed By: Tripp Lewton, Comma-Q Architecture Date: May 17, 2012 Project: BPS Belgrade Elementary School Location: Belgrade,
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationDirections for the 25' Jr Batting Cage & Frame
Directions for the 25' Jr Batting Cage & Frame Parts Qty Part Description 1 6 Upper corners of the arch (with hex bolts) 2 6 Bent pipe for arch feet 3 6 Pipe with no swedge (2 per horizontal arch) 4 12
More informationAutodesk Inventor 2016 Creating Sketches
Autodesk Inventor 2016 Creating Sketches 2D Sketch Practice 1 1. Launch Autodesk Inventor 2016 2. Create a new Part file (.ipt) 3. Save File As a. Click on the save icon. b. Save you file onto your flash
More informationDETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R
INCH-POUND 20 August 2009 SUPERSEDING MS24264P 6 February 2004 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new design for
More informationSUBMITTAL REVIEW Food Service Equipment Data Sheets GCAN. Notes: 1. See D-C Design comments. Submittal: No. 035.
SUBMITTAL REVIEW Submittal: No. 035.00 Spec Section: 11 4000 Food Service Equipment Reviewed By: Laura Landon, Comma-Q Architecture Date: July 23, 2012 Project: BPS Belgrade Elementary School Location:
More informationTi-Color STAINLESS STEEL HANDRAIL
Ti-Color STINLESS STEEL HNDRIL Handrail Custom-made Rail HNDRIL STNDRD Handrail Custom-made rail Vertical Type Horizontal Type Elegance Type HNDRIL TYPE Vertical Type 5001 / 6001 6002 / 7002 5004 / 6004
More informationMeasuring current transformers of the W B series
Measuring current transformers of the W B series W-B_D00075_01_D_XXEN/09.2015 Measuring current transformers of the W B series Product description Measuring current transformers of the W B series are highly
More informationTaper Bushing Installation
Taper Installation IMPORTNT NOTE: Please follow the instructions on this sheet in order for the Martin bushing to perform satisfactorily. INSTLLTION 1. Clean all oil, dirt, and paint from shaft, bushing
More informationSAMPLE QUESTION PAPER III ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70
SAMPLE QUESTION PAPER III ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70 Note: (i) Attempt all the questions. (ii) Use both sides of the drawing sheet, if necessary. (iii) All dimensions
More informationINDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR , INDIA
INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR 721302, INDIA No. IIT/CHEMISTRY/FURNITURE/2017-18 /A Date: 08 th May, 2018 _Procurement and Installation of Laboratory furniture and fume hoods in Chemistry Laboratory,
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/82E 25 January 2018 SUPERSEDING MIL-DTL-83723/82E 19 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING, RECEPTACLE, FLANGE MOUNT, THREADED
More informationStudent, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
More informationEngineering and Construction Services Division Construction Drawings for Sewers and Watermains. T No. Revision T No. Revision Remarks All T drawings
Engineering and Construction Services Division Construction Drawings for Sewers and Watermains Revision No. 8 April All T drawings New title block for each drawing is now standardized. Revision numbers
More informationBS EN :2006. Test of: Deceuninck Side hung and top hung window. Windows and doors Product standard, performance characteristics
Exova Warringtonfire Key Industrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) 1902 722 122 F : +44 (0) 1902 727 242 E : willenhall@exova.com W: www.exova.com BS EN 14351-1:2006 Test
More informationAddendum. Windsor Hall Renovations Date: October 12, 2017 Addendum No: 3 GENERAL. 1! Addendum #4 will be issued 2:00 PM Tuesday October 17, 2017.
!!! Addendum EXP Project No: MTA Project No: WIND-17-01 Project: Windsor Hall Renovations October 12, 2017 Addendum No: 3 The following information supplements and/or supersedes the bid documents. This
More informationThe General Principles of Detailed Design at Ruukki Construction Ltd. Julia Piiroinen
The General Principles of Detailed Design at Ruukki Construction Ltd 1. The feasibilities of production at the workshops 2. Hot-rolled I-profile 2.1. Stiffeners 2.2. End plates 2.3. Lifting 3. Welded I-profile
More informationBISON GOOSENECK FOOTBALL 1 PAIR OF GOAL POSTS
Instruction Manual BISON GOOSENECK FOOTBALL 1 PAIR OF GOAL POSTS Customer Service (800) 247-7668 P A R T S L I S T Item Qty Description Item Qty Description A 2 GOOSENECK POLE I 4 UPRIGHTS B 2 BAND CLAMP
More informationVerge Flashing. Verge Flashing. Only use if flashings requirements can be site measured before ordering. Verge Clip
Tolerance Detail (recommended) Verge Closure Verge Channel Verge Clip Verge Flashing VERGE CHANNEL RIVETTED TO EUROSEAM AT APPROX 400MM CENTRES USING 4.8 X 12MM RIVETS. NB: DO NOT RIVET AT HALTER POSITION
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS Time allowed : 3 hours Maximum Marks : 70 Note : (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimetres. (iv) Missing
More informationNorth East Toilet Cubicles Ltd.
200 200 850 120 1170 850 2400 1180 1180 North East Toilet Cubicles Ltd. Tel: 01429 277500 Fax: 01429 868590 Email: info@netoiletcubicles.co.uk Urinal Duct Panel System The following drawings are provided
More informationKimberly. High School FILEPATH:
COURSE: CAD NAME: MR. JANOTA BLOCK: DATE: 2-4-08 UNIT: ASSEMBLY DWG PROJECT: ARBOR PRESS PART: ARBOR PRESS Drawings\80 - Assembly Drawings\Arbor Press\Arbor Press.iam PAPER: B SCALE: SHEET OF 4 PARTS LIST
More informationBRACKET FIX SYSTEM FITTING INSTRUCTIONS
Whether building a new staircase or replacing old banisters, the patented Bracket Fix stair balustrading system will enable you to complete the work quickly and easily. The Richard Burbidge patented Bracket
More informationRorty Locost IRS Assembly
Rorty Locost IRS Assembly This Independent Rear Suspension design breaks no new ground, but is devised specifically for the Lotus Seven style "Locost" sports car as detailed in Ron Champion's book "Build
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More information32 Gallon Perforated Square Receptacle
32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1
More informationMobile Cart for Flat Panel Display MSP-SPTC42 (PTC-2000 Series)
INSTALLATION INSTRUCTIONS Mobile Cart for Flat Panel Display (PTC-2000 Series) The Mobile Cart for Flat Panel Display is designed to assist the presenter in showrooms, boardrooms, and trade show exhibits.
More informationISO 7438 INTERNATIONAL STANDARD. Metallic materials Bend test. Matériaux métalliques Essai de pliage. Second edition
INTERNATIONAL STANDARD ISO 7438 Second edition 2005-06-15 Metallic materials Bend test Matériaux métalliques Essai de pliage Reference number ISO 7438:2005(E) ISO 2005 PDF disclaimer This PDF file may
More informationRollerscreen ENG. Installation Instructions
Rollerscreen Instructions Introduction Figure 1, System Overview and Individual Components -2- Introduction INTRODUCTION Parts List REFERANCE QTY PRODUCT DESCRIPTION A1 2 Top and Bottom Tubes B1 1 Screen
More informationREHAU PROFILA BENCH TRUNKING INSTALLATION GUIDELINES. Building Solutions Automotive Industry
REHAU PROFILA BENCH TRUNKING INSTALLATION GUIDELINES www.rehau.co.uk Building Solutions Automotive Industry PROFILA BENCH TRUNKING CONTENTS PAGE 1. Generalities.... 03 2. Fixing the Base.... 03 2.1 Adjacent
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationENGINEERING STANDARDS SECTION: TOG-L-LOC V-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works
Tog-L-Loc Tog-L-Loc is a circular, leakproof joint formed by drawing the metals into a circular "cup'' and then expanding the diameter to form a 360 radial lock below the bottom sheet. How The Joining
More informationNorwich Technical. Trunking PERIMETER AND DISTRIBUTION. Description CABLE MANAGEMENT. Colour: White only. Material: PVCu. mkelectric.co.
CALE MANAGEMENT TECHNICAL SPECIFICATION MATERIALS PVCu materials used in the manufacture of MK products are self extinguishing non-flame propagating in accordance with S 78 Part. Extrusion material has
More informationLegend. Machining required. Refer to schedule on sheet 9 of 9 for more information.
Dimension drawings to fabricate an Integral Sleeve Hitch John Deere Part Number: 668 Dimensions references prepared by: Richard Chuckry Drawings prepared by: Kenneth Dortch Reviewed and edited by: Kent
More informationUtility Structures. Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles
Utility Structures Utility vaults, trenches, transformer pads Electrical Pole Bases and switching cubicles PRODUCT GUIDE & TECHNICAL REFERENCE MANUAL Providing the right solutions. UTILITY STRUCTURES Perfect
More informationPosition Transmitter TGS 40 (RAM)
Operating Instructions 42/14-50 EN Position Transmitter TGS 40 (RAM) Position Transmitter TGS 40 (RAM) Operating Instructions Document no. 42/14-50 EN Date of issue: 05.2006 Revision: B Manufacturer: ABB
More informationPRODUCT INFORMATION CBN-SXR CBN-LN-SXR CBN-SXB CBN-LN-SXB. CBN End Mill Series
PRODUCT INFORMATION CBN-LN-SXR CBN-LN-SXB CBN End Mill Series The helical flutes are changing the CBN end mills! Highly Appealing OSG CBN End Mill Series Are you bothered by these issues? The work material
More informationTried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
More informationSales: Technical: Fax:
DATA SHEET Metal film resistors Order code Manufacturer code Description 64-0725 2322 157 15609 PACK 1000 56R 0.4W MF RESISTOR (RC) 64-0475 n/a PACK 100 390R 0.4W MF RESISTOR 64-0480 n/a PACK 100 470R
More informationDrill for Wheel Hubs. Solid Carbide Drill MHE
. Update B3G Expanded New Grade Solid Carbide Drill Uniue design provides superior hole accuracy for shallow hole drilling. Effective drilling of hub bolt holes can be achieved. Additional new grade DP30
More informationINSTALLATION ACCESSORIES A STEP BY STEP GUIDE TO GOOD COLD WELDING
INSTALLATION ACCESSORIES A STEP BY STEP GUIDE TO GOOD COLD WELDING PREPARING THE JOB CHECKLIST: HAVE ALL THE ITEMS YOU NEED IN YOUR POSSESSION: Pipes and fittings Welding polymers, cleaner Tools IPE (individual
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationred rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
More informationD c mm Clamp PK247 PK249 PK250 PK251 PK252 PK253 FS2023 (SW 0,9) FS202 (Torx 6)
Reamers R 4060 Tool Designation d 1 Z No. of indexable inserts Indexable insert type d 1h6 R4060.Z10.06H6.00.C-E1 6 10 62 43 15 1 0,05 1 P 65.. - 00R -.. R4060.Z10.07H6.0.C-E1 7 10 65 42 25 1 0,05 1 P
More informationINSTALLATION AN EXPLODED VIEW OF A TYPICAL BRETT MARTIN RAINWATER INSTALLATION RAINWATER PRODUCT GUIDE
AN EXPLODED VIEW OF A TYPICAL BRETT MARTIN RAINWATER HANDLING Brett Martin Rainwater systems are light in weight and are therefore easy to handle. As with all other quality materials, Rainwater components
More informationMeasuring current transformers of the W, W series
Measuring current transformers of the W, W -8000 series W(-8000)_D00078_01_D_XXEN/09.2015 Measuring current transformers of the W, W -8000 series Product description The highly sensitive W and W -8000
More informationBATICUVETTE/BIDET VERSO SCB 350 ASSEMBLY INSTRUCTIONS
GB BATICUVETTE/BIDET VERSO SCB 350 ASSEMBLY INSTRUCTIONS DESCRIPTION o n g f h l m k p j i a b e d c 2 a b c d e f g h i j k Elbow bend fixation clip Elbow bend fixation Pipe fixation clip Pipe fixation
More informationANNEXURE 1 LIST OF STANDARD TOOLS FOR FLOOR TYPE CNC HORIZONTAL BORING MACHINE
Speciation cum Compliance Certificate for Floor Type CNC H.B.M: Indent No. CG7A0109 ANNEXURE 1 LIST OF STANDARD TOOLS FOR FLOOR TYPE CNC HORIZONTAL BORING MACHINE SNO Tool Description Qty Remarks 1 Stub
More informationCUSTOMER TECHNICAL MEMO # 79
CUSTOMER TECHNICAL MEMO # 79 Subject: Date: 7/8/09 Commercial Sliding Door, View-max Sliding Window & Double Hung Technical Manual Amendments From: Product Development Please be advised there have been
More informationIPC-D-355. Printed Board Assembly Description in Digital Form IPC-D-355. The Institute for. Interconnecting. and Packaging Electronic Circuits
The Institute for Interconnecting and Packaging Electronic Circuits Printed Board Assembly Description in Digital Form January 1995 A standard developed by the Institute for Interconnecting and Packaging
More informationflexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
More informationSHOWER DRAINS PRODUCT BROCHURE
SHOWER DRAINS PRODUCT BROCHURE A B & A SHOWER DRAINS OVERVIEW A B & A SHOWER DRAINS FEATURES FUNCTIONAL & VERSATILE AB&A bath drains are offered in an assortment of styles and special finishes to complement
More informationFurniture and Accessories
Furniture and Chairs 300051 - Chair, Contemporary Arm, 23"W 18"D 31"H 300052 - Chair, Contemporary Side, 19.5"W 18"D 31"H 300050 - Chair, Plastic Contour, 18"W 18.5"D 32"H 300053 - Stool, Contemporary,
More informationFreestanding Guardrail System. Operation & Maintenance Manual
Freestanding Guardrail System Operation & Maintenance Manual Specification Free Standing Edge Protection - System Specification General Description Our freestanding edge protection system is a cantilevered
More informationDETAIL SPECIFICATION SHEET CONNECTOR, PLUG, TYPE I, MOLDED, THREE-, FOUR-, AND FIVE-CONDUCTOR
INCH-POUND MIL-DTL-/E(SH) 6 April 0 SUPERSEDING MIL-C-/D(SH) May 97 DETAIL SPECIFICATION SHEET CONNECT, PLUG, TYPE I, MOLDED, THREE-, FOUR-, AND FIVE-CONDUCT This specification is approved for use by the
More informationSelection Guide for Flat Thermally Toughened Soda Lime Silicate Safety Glass
Selection Guide for Flat Thermally Toughened Soda Lime Silicate Safety Glass February 2016 Administer by PO Box 7861, Halfway House, 1685 ASSOCIATION OF ARCHITECTURAL ALUMINIUM MANUFACTURERS OF SOUTH AFRICA
More information² TL Beton-StB 07 = German technical conditions for construction materials for concrete road pavements
Introduction A transverse joint frequently crossed by heavy goods traffic tends to form steps if it not perfectly doweled. This is associated with negative effects on ride comfort and driving safety as
More informationArchitectural Floor Plan Symbols
Architectural Floor Plan Symbols The symbols below are used in architectural floor plans. Every office has their own standard, but most symbols should be similar to those shown on this page. Building Section
More informationPANIC BARS Marking IN ACCORDANCE WITH 1125:1997/A1:2001
PANIC BARS Marking IN ACCORDANCE WITH 25:997/A:200 Exclusive PININFARINA design Full adaptability in application Quick and easy installation Reliable and safe performance Tested up to 2.000.000 cycles
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PRESSURE GAUGES, Section 15130
PART 1 GENERAL 1.01 SUMMARY Section 15130 PRESSURE GAUGES, This Section includes the furnishing and subsequent installation of pressure gauges and pressure level transmitters as shown on Plans and specified
More information