SonarWiz Datum Align Reference
|
|
- Paulina Flowers
- 5 years ago
- Views:
Transcription
1 SonarWiz Datum Align Reference Rev 8.0, 12/22/2015 Chesapeake Technology, Inc. Main Web site: Support Web site: W. El Camino Real, Suite 100 Mountain View, CA Tel: Fax:
2 Table of Contents 1 Datum Align Feature Initial Release and Documented Adjustments in Datum Align Feature Why Do This? Sequence Effects - Datum Align, then Reflectors, Cores Dependencies - Coordinate System, Units, Numerical Values How to Use the SBP Datum Align Feature Importing and Bottom-tracking your SBP file Making or Importing a Grid File Making your own GRD File Importing a GRD file GRD import with unknown projection Operating the Datum Align Calculation Datum Align - Output Results Exporting the CSF file + corrections-csv to a datum-aligned SEG File Viewing your Exported SEG file Finding Your SEG File SEISEE View of Original SGY File SEISEE View of Datum-Aligned SGY File Importing your Datum-Aligned SGY File with SonarWiz Reflector Export - with Datum Align Added Document Versions Datum Align Feature The datum align feature is described in the SonarWiz 5 User Guide section 5.19 like this: "SonarWiz SBP Datum Align (SBP DA) utility is a function for computing the datum separation between a reference surface such as a multi-beam bathymetry grid, and one or more sub-bottom profiler files in your SonarWiz project. Rev 7, 5/8/2015 support@chesapeaketech.com Page 2
3 In order to successfully use the SBP DA utility you must first accurately bottom track your sub-bottom profiles. The SBP DA utility computes the vertical separation between the altitude of each ping in the SBP profiles, and the reference surface at that ping s X/Y location. The distance between these two surfaces is referred to as datum separation, and this information is stored in the CSF file. This datum separation value corrects for several different vertical offsets at once. These vertical offsets include the heave of the sensor due to wave motion, the depth of a towed sensor below the sea surface and any offset between the ship s GPS antenna and the sensor. " In the document sections below, we explain how to use the SBP DA tool to your advantage, in your own projects. It is a very complicated feature to use, involving several steps, so this supplement to the user guide description may help you. 1.1 Initial Release and Documented Adjustments in Datum Align Feature The feature was introduced in January, 2013, and enhanced several times since then. The item entries below come directly from the site, VERSION HISTORY SonarWiz 5 area: /28/2014 7:07:00 PM 10/2/2014 5:00:07 PM 11/8/2013 4:53:45 PM 9/27/2013 3:37:37 PM 13. BUGFIX:SBP:MINOR:GM:0 -- The SBP Datum Align utility did not clear any values in the geoid height value, when computing the separation between the SBP profile and the reference datum (grid). When SBP datum align is applied, the internal value for geoid height is now zeroed out so that the aligned profiles will match up in the 3D editor and subsequent exports. 3. ENHANCEMENT:SBP:MINOR:GM:0 -- Added option to SBP reflector exports to add the SBP Datum Alignment offset to exported reflector files like CSV and XYZ text. 1. ENHANCEMENT:SBP:MINOR -- Make the SBP Datum Align tool work with grids that contain either negative or positive depth values. 5. ENHANCEMENT:SBP:MINOR -- Add checkbox to the CSF to SEGY export utility to generate SEG-Y files that adjust the output sensor depth to reflect the datum separation computed in the Datum Align SBP Utility. 6. ENHANCEMENT:SBP:MINOR -- Minor cleanup to the SBP Datum Align utility and dialog /23/ ENHANCEMENT:BATHY:MAJOR First release of beta Rev 7, 5/8/2015 support@chesapeaketech.com Page 3
4 3:20:52 PM bathy enabled build. 2. ENHANCEMENT:SBP:MINOR First cut at datum alignment of SBP profiles to a bathymetry grid. 1.2 Why Do This? The datum separation value can be used to generate a corrected SEG-Y file that contains a more accurate bottom-track altitude value. So if you have a sub-bottom profile with a simple echo sounder, and a multi-beam or interferometric scan of the same area, with more accurate depth information, you can basically enhance the accuracy of your sub-bottom bottom-track with the bathy grid depth information. You take advantage of all this by exporting a corrected SEGY format file. The reason to do this, is a perfect multi-beam survey grid should take into account several factors that may not have been used to "correct" your sub-bottom survey data, such as: (1) tide effects in effect at the day and time of the survey; (2) sound-velocity profile effects; (3) roll, pitch, yaw, heading effects; (4) heave motion effects. A well-done multi-beam survey would take ALL those into account, and you get the benefit of all that, by adjusting your sub-bottom bottom-track to the reference grid from the multi-beam survey. 1.3 Sequence Effects - Datum Align, then Reflectors, Cores Since you are making an adjustment in the SEG file "elevation", with respect to a reference grid, any post-processing steps that depend upon the elevation, like reflectors and cores, should be re-done on the adjusted SEG. So take that into account and do not bother recording reflector or core annotation on your sub-bottom data, if you are going to be using datum align. Do the datum alignment adjustment first, then continue with sub-bottom post-processing. If you happened to have annotated reflectors BEFORE applying datum align, the adjusted heights can be applied in your reflectors in SonarWiz versions and later, per the enhancement described above in section 1.1. Rev 7, 5/8/2015 support@chesapeaketech.com Page 4
5 1.4 Dependencies - Coordinate System, Units, Numerical Values Your project coordinate system and bathymetric grid should both be in the same coordinate system and units, and meters works best. We have not verified the whole process using US FEET, for example, but typically use this in meters-based units and coordinate systems. 2 How to Use the SBP Datum Align Feature If you are going to change the global SOUND VELOCITY value in a project, please do this before any other operations, after CREATE PROJECT. Do it before bottom-tracking, and before datum alignment, for example, because the sound velocity will affect the apparent depth of the bottom, and all subsequent depth measurements. Here's how use the feature, in overview: 1. Import your sub-bottom file and bottom-track it, creating a bottom-tracked CSF file. 2. Create or obtain a bathy grid file (e.g. GRD file) (e.g. feed in an XYZ file and create the GRD file, using SonarWiz 5) 3. Run the Datum Align tool to compare the bathy grid file to your bottom-tracked subbottom file, and create the corrections CSV file (exports to your CSF folder) 4. Export the CSF file as a SEGY file, and specify to adjust the SEGY file using datum alignment corrections. SonarWiz 5 will select the corrections CSV file by name, and apply the corrections. You will see this in LAGA (byte 105, msecs) and CPD-X (byte 181, microsecs) fields in the SEG file exported. View it in SEISEE to confirm. 5. Import and view your corrected SEGY file, using a special SENSOR DEPTH selection upon import (FGSI AUV), and display your SEG file with topographic correction enabled. 6. Continue post-processing on the adjusted SEG file that has been imported again, doing reflector annotation and cores, intersections, and image export. Sections 2.1 to 2.6 below give more detail of the summary steps outlined above. 2.1 Importing and Bottom-tracking your SBP file No special instructions here - we assume you are good at this already. Here's an example sub-bottom profile with a reflector added BEFORE datum alignment, using software: Rev 7, 5/8/2015 support@chesapeaketech.com Page 5
6 Note that the bottom-track starts (left-side, first ping) at 87m depth, and the reflector starts at 113m depth. Rev 7, 5/8/ Page 6
7 2.2 Making or Importing a Grid File Making your own GRD File You may use the SonarWiz 5 post-processing menu choice Grid and Contour to create a sample grid file for your survey, and it may then be used for your Datum Align operation. A Surfer 11 *.GRD grid file may be created in the Grid and Contour tool in the Tools section. See Section 6.6 on page 606 of the SonarWiz 5 User Guide for more information Importing a GRD file Alternatively, if you have a bathymetric XYZ file, and have access to the GoldenSoftware.com product Surfer10 or Surfer11, you can convert your bathy XYZ file to s *.GRD grid file, for input to this process in SonarWiz 5. SonarWiz5 converts an XYZ file to GRD format just fine though. Here's an example: Rev 7, 5/8/2015 support@chesapeaketech.com Page 7
8 Remember that the grid should be in the same coordinate system, and units, as the SonarWiz project. For our reference GRD file in the example from section 2.1, we will use this bathymetric grid, previously stored in the MISC folder of the project: Note that having a PRJ file is sometimes the key to importing a GRD file back into SonarWiz. Here follows a specific example of a GRD import where the user had to CREATE a PRJ file to facilitate the import GRD import with unknown projection Sometimes you know that the GRD file represents the same area as the project data, but SonarWiz does not know it. Here's an example of GRD file import where you tell SonarWiz in more detail how to do it. It's an actual customer example: 1. I verified the grid was a valid surfer grid in Surfer (it was fine). 2. I copied the grid into my project Grids folder. This isn't necessary, but it is a better place than any else on my machine. 3. I Add/Imported the Grid... file and selected the grid. 4. When prompted for the projection, I set it to match the project (UTM Zone 19 N) and Saved the PRJ file to the same directory as the grid (this might be the key) Rev 7, 5/8/2015 support@chesapeaketech.com Page 8
9 5. My Grids directory looks like this now: 6. The grid loaded without errors for me. 7. I centered the display on my grid and it was all red (color bar problems) 8. I opened the grid properties and found the z range of the grid: Rev 7, 5/8/2015 support@chesapeaketech.com Page 9
10 Note that depths are negative, so rescale the color legend accordingly: Rev 7, 5/8/ Page 10
11 9. If you have a bathymetry post-processing license and have the Bathymetry Tab > shaded relief option, it's another nice touch to the grid. Make sure that the vertical exaggeration shade settings are non-zero. I noticed that the default on a new project sets the sliders all the way to the left, and that won't work. They need to be set in the middle for a start, otherwise vertical exaggeration is zero (bad) and the sun is on the horizon (bad) and won't cast any light on the topography. Oops. Set is something like this or use Views > Bathymetry Views > Shaded Relief Settings... to set the values more precisely. Rev 7, 5/8/2015 support@chesapeaketech.com Page 11
12 10. Here is the GRD I got with those settings: Then you can proceed with the datum align operation, using your imported grid file. 2.3 Operating the Datum Align Calculation To open Datum Align SBP Profiles to BathymetryGrid, left-click on the Datum Align button within the Sub-bottom group: Rev 7, 5/8/2015 support@chesapeaketech.com Page 12
13 Once opened the Datum Align dialog (Figure 441) asks for two things: (1) First input required is the Bathymetry Grid File (*.GRD) to be used as the Datum. This file must be in one of the supported SonarWiz grid file formats. NOTE: Either positive or negative grid polarity works fine. There is logic to handle the case where you have elevations (negative numbers) instead of depth (positive numbers). If both (MinElevation < 0 && MaxElevation < 1) then we invert the sign of the elevation data, before doing the datum alignment, so that positive numbers (depth) format are used in the calculations. In this example, we will browse to this reference grid: (2) The second choice to make is which CSF file will have the corrections applied. The user must select the sub-bottom file(s) that will have their bottom tracks snapped to the reference grid. Rev 7, 5/8/2015 support@chesapeaketech.com Page 13
14 After the OK button is left-clicked each sub-bottom file bottom track is aligned (snapped) to the grid, and a CSV file is created in the CSF folder of your project. Let's look at what you get. In this example, we are going to datum align only file 14 of this set: Rev 7, 5/8/2015 support@chesapeaketech.com Page 14
15 If SonarWiz is unsure of the coordinate system of the grid, it may ask for confirmation, like in this case - using a dialog like this: Rev 7, 5/8/2015 support@chesapeaketech.com Page 15
16 We simply click OK to confirm that the reference grid is in the same UTM84-30N coordinate system as the project Datum Align - Output Results Here's an example CSV file created using the example from 2.1: Rev 7, 5/8/2015 support@chesapeaketech.com Page 16
17 This is inside the CSF folder. In addition to the BTK (bottom-track results) and CSF files, we now have a datumalign.csv file we can open and view: Here we see the corrections which will be applied when we export the CSF file as a SEG file, or adjust a reflector (versions and later can do this): Note than neither your SEG file, nor your CSF file, have been adjusted according to the reference grid yet. All you have is an exported CSV file, which computed the difference between the reference grid and your previous bottom-track in that CSF file. The important columns to note in this CSV file are GridDepth (depth in meters from the+mbes survey as the same locations, which accounted for tides, sound velocity profile, roll, pitch, yaw, heave, etc), and the "Delta" column. Delta means change - and this is the amount of adjustment in meters that will be applied to your conmputed bottom-track depth, when you export a CSF-to-SEG file, or export reflectors (adjustment possible in versions and later). So we were only off by 3m. Here's a view of the bottom-track (CSF file) after datum align has been computed: Rev 7, 5/8/2015 support@chesapeaketech.com Page 17
18 It's the same as before - no adjustment has been applied. Rev 7, 5/8/2015 support@chesapeaketech.com Page 18
19 To verify this, look at your ALTITUDE column of the original CSF file, before and after running the DATUM ALIGN step. The CSF file ALTITUDE column can be viewed by doing TOOLS -> CSF -> Extract CSF to CSV file, like this: The exportd CSV goes to your CSF folder, and opens in EXCEL. The ALTITUDE column, after datum align, remains the same as before: The bottom-track depth shown at m in the images is a combination of sensor depth (72m in this case) and "altitude", computed as a function of the time the ping took Rev 7, 5/8/2015 support@chesapeaketech.com Page 19
20 to descend and return to your designated seafloor, according to the global sonud velocity setting in SonarWiz (adjustable in ADVANCED OPTIONS): 2.4 Exporting the CSF file + corrections-csv to a datum-aligned SEG File The next step is to re-create a SEG file using the original data from the CSF file for the imported SEG file, plus the corrections-csv. Rev 7, 5/8/2015 support@chesapeaketech.com Page 20
21 Next, all you need to do in this export dialog is select your CSF file, and one special checkbox: Rev 7, 5/8/ Page 21
22 Rev 7, 5/8/ Page 22
23 The SEG file will be exported to the SBP folder of the project, and will have the same name as the CSF file. We have selected 16-bit fixed point export format, because that was the original SGY file format: Rev 7, 5/8/ Page 23
24 and asked to apply datum alignment, since it is available. You get a little progressdialog while it is happening: 2.5 Viewing your Exported SEG file Finding Your SEG File The SEG file exports to the SBP folder of your project, here. The first SGY file listed was the original imported SGY file, and the second one was the result of our datumaligned CSF export: Rev 7, 5/8/2015 support@chesapeaketech.com Page 24
25 The changes in the two files are apparent in SEISEE SEISEE View of Original SGY File The place to look in the TRACE HEADER is the LAGA (byte 105) and CDP-X (byte 181) fields. Here are the values in the original file: Rev 7, 5/8/ Page 25
26 2.5.3 SEISEE View of Datum-Aligned SGY File The LAGA and CDP-X trace header fields now holf the datum align infromation: Importing your Datum-Aligned SGY File with SonarWiz5 To see the corrections in your imported SGY file, you need to: 1) Use a special selection during the file import, using FileTypeSpecificOptions, and 2) View your file with Topographic Correction enabled. Here's how to do it Import using Special Settings In the SGY file import "OPEN" Dialog, click on File Type Specific Options. For clarity in this example, we renamed the SGY file to Rev 7, 5/8/2015 support@chesapeaketech.com Page 26
27 For file-type specific options, use these. Specifically, select this import option for READ SENSOR DEPTH FROM BYTES: Rev 7, 5/8/ Page 27
28 Using this setting, SonarWiz 5 looks for sensor depth in the LAGA (byte 105) and CDP- X (Byte 181) fields, in msec and microsecs, and can use this information to apply topographic correction View the SGY File in SonarWiz 5 with TOPO CORRECTION enabled Once you have imported your SEG file, view it in the DIGITIZER VIEW and apply topo correction: ON like this: Rev 7, 5/8/2015 support@chesapeaketech.com Page 28
29 For comparison, the DIGITIZER VIEW of the ORIGINAL SGY file looked like this: Now, with topo correction applied, the datum-aligned SGY file looks like this: Rev 7, 5/8/ Page 29
30 It's clear that the effects are present, the bottom has been adjusted down approx 3m, so the correct-csv file data have been applied. 2.6 Reflector Export - with Datum Align Added Since , the ability to export reflectors, digitized on the original SGY file, with the datum align correction added in, has been supported, like this. Open the Feature Manager and select EXPORT: Rev 7, 5/8/2015 support@chesapeaketech.com Page 30
31 Then select the reflector to export, and export it with datum alignment added: Rev 7, 5/8/ Page 31
32 We are going to export a CSV file version of our reflector, saving it to the SHP file folder. You can open these in EXCEL and see the datum align effect: Exported UNADJUSTED: Exported with DATUM ALIGN ADJUSTMENT: Rev 7, 5/8/2015 support@chesapeaketech.com Page 32
33 3 Document Versions Rev 8, 12/22/ Semantic update - giving a complete and detailed example of overcoming GRD file import issues by saving the PRJ file to match the project, as well as a case of a negative-going GRD depth scale - section Rev 7, Format change only - using new CTI graphics - corporate and product logos. Rev 6, 1/15/ Ability to export corrected reflectors added in Rev 5, 9/10/ Grid polarity usage clarified - either negative or positive grid work fine. Rev 7, 5/8/2015 support@chesapeaketech.com Page 33
Kongsberg Seatex AS Pirsenteret N-7462 Trondheim Norway POSITION 303 VELOCITY 900 HEADING 910 ATTITUDE 413 HEAVE 888
WinFrog Device Group: Device Name/Model: Device Manufacturer: Device Data String(s) Output to WinFrog: WinFrog Data String(s) Output to Device: WinFrog Data Item(s) and their RAW record: GPS SEAPATH Kongsberg
More informationStratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Boreholes and Cross Sections Become familiar with boreholes and borehole cross sections in GMS Objectives Learn how to import borehole data, construct a
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data v. 10.1 Objectives Build a basic HEC-RAS
More informationStratigraphy Modeling Boreholes and Cross Sections
GMS TUTORIALS Stratigraphy Modeling Boreholes and Cross Sections The Borehole module of GMS can be used to visualize boreholes created from drilling logs. Also three-dimensional cross sections between
More informationHydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections
v. 9.1 WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Managing HEC-RAS Cross Sections Modify cross sections in an HEC-RAS model to use surveyed cross section data Objectives Build a basic HEC-RAS
More informationKONGSBERG seafloor-mapping echosounders
KONGSBERG seafloor-mapping echosounders Berit Horvei WORLD CLASS through people, technology and dedication AGENDA Historical overview EM series Multibeam echosounder and Subbottom profiler Topside software.
More informationAutoCAD Civil 3D 2009 ESSENTIALS
AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how
More informationBIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010
BIM e Submission Guideline Structural Annex 1a Recommended Process Revit 2010 Building and Construction Authority 5 Maxwell Road #16-00 Tower Block MND Complex Singapore 069110 www.bca.gov.sg Revision
More informationGeneric Bathymetry Data - Interface Control Document
Generic Bathymetry Data - Interface Control Document For WASSP Prepared by: Keith Fletcher Electronic Navigation Ltd October 15, 2013 Version 2.2 2013 by WASSP Ltd No part of this document should be reproduced
More informationv Introduction Images Import images in a variety of formats and register the images to a coordinate projection WMS Tutorials Time minutes
v. 10.1 WMS 10.1 Tutorial Import images in a variety of formats and register the images to a coordinate projection Objectives Import various types of image files from different sources. Learn how to work
More informationDEVICE CONFIGURATION INSTRUCTIONS
WinFrog Device Group: Device Name/Model: Device Manufacturer: Device Data String(s) Output to WinFrog: WinFrog Data String(s) Output to Device: WinFrog Data Item(s) and their RAW record: GPS POS/MV (NMEA)
More information1. Working with Bathymetry
1. Working with Bathymetry The CMS setup for Shark River Inlet provides a succinct example for illustrating a number of methods and SMS tools that can be applied to most engineering projects. The area
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationAlibre Design Tutorial - Simple Extrude Step-Pyramid-1
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1 Part Tutorial Exercise 4: Step-Pyramid-1 [text version] In this Exercise, We will set System Parameters first. Then, in sketch mode, outline the Step
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationFigure 1 The Raith 150 TWO
RAITH 150 TWO SOP Figure 1 The Raith 150 TWO LOCATION: Raith 150 TWO room, Lithography area, NanoFab PRIMARY TRAINER: SECONDARY TRAINER: 1. OVERVIEW The Raith 150 TWO is an ultra high resolution, low voltage
More informationTeledyne PDS. Monopile Placement - Laser scan position. Version March 2017
Monopile Placement - Laser scan position Teledyne PDS Version 2.3.1 March 2017 Teledyne RESON B.V. Stuttgartstraat 42-44 3047 AS Rotterdam The Netherlands Tel.: +31 (0)10 245 15 00 www.teledyne-reson.com
More informationScanning Setup Guide for TWAIN Datasource
Scanning Setup Guide for TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 3 Using the TWAIN Datasource... 4 How do I begin?... 5 Selecting Image settings...
More informationPrasanth. Lathe Machining
Lathe Machining Overview Conventions What's New? Getting Started Open the Part to Machine Create a Rough Turning Operation Replay the Toolpath Create a Groove Turning Operation Create Profile Finish Turning
More informationv WMS 10.0 Tutorial Introduction Images Read images in a variety of formats and register the images to a coordinate projection
v. 10.0 WMS 10.0 Tutorial Read images in a variety of formats and register the images to a coordinate projection Objectives Read various types of image files from different sources. Learn how to work with
More informationThree-dimensional investigation of buried structures with multi-transducer parametric sub-bottom profiler as part of hydrographical applications
Three-dimensional investigation of buried structures with multi-transducer parametric sub-bottom profiler as part Jens LOWAG, Germany, Dr. Jens WUNDERLICH, Germany, Peter HUEMBS, Germany Key words: parametric,
More informationTo apply proposed roadway data (vertical alignments, cross section template data, cut/fill slopes, etc.)
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Roadway Design Extracting Existing Ground Cross Sections This document
More informationAdvance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
More informationSCHEDULE USER GUIDE. Version Noventri Suite Schedule User Guide SF100E REV 08
SCHEDULE USER GUIDE Version 2.0 1 Noventri Suite Schedule User Guide SF100E-0162-02 REV 08 Table of Contents 1. SCHEDULE... 3 1.1 Overview... 3 1.2 Start SCHEDULE... 3 1.3 Select Project... 4 1.4 Select
More informationTABLE OF CONTENTS INTRODUCTION...4
Starting Guide TABLE OF CONTENTS INTRODUCTION...4 Advance Steel... 4 Where to find information?... 5 INSTALLATION... 5 System requirements... 5 Starting the installation... 5 STARTING ADVANCE STEEL...
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationTouch Probe Cycles TNC 426 TNC 430
Touch Probe Cycles TNC 426 TNC 430 NC Software 280 472-xx 280 473-xx 280 474-xx 280 475-xx 280 476-xx 280 477-xx User s Manual English (en) 6/2003 TNC Model, Software and Features This manual describes
More informationModule 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)
Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model
More informationSheet Metal Punch ifeatures
Lesson 5 Sheet Metal Punch ifeatures Overview This lesson describes punch ifeatures and their use in sheet metal parts. You use punch ifeatures to simplify the creation of common and specialty cut and
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More informationOF LEVELS & ADJUSTMENTS TO THE GRID. Bldg: Levels. PROF. PAUL C. KING RA New York City College of Technology. Learning Community.
Bldg: Levels DEVELOPMENT OF LEVELS & ADJUSTMENTS TO THE GRID Overview: The existing drawing includes 2 levels set 10' apart. For the Lab Building we need to createe a total of 6 levels with a vertical
More informationSYSTEM 5900 SIDE SCAN SONAR
SYSTEM 5900 SIDE SCAN SONAR HIGH-RESOLUTION, DYNAMICALLY FOCUSED, MULTI-BEAM SIDE SCAN SONAR Klein Marine System s 5900 sonar is the flagship in our exclusive family of multi-beam technology-based side
More informationTAP 6 Demo Quick Tour
TAP 6 Demo Quick Tour Sales Contact: Curt Alway P.O. Box 7205 Charlottesville, VA 22906 Voice: 303-344-5486, Ext 1 Fax: 303-265-9399 Email: sales@softwright.com Technical Contact: Todd Summers, Ph.D. P.O.
More informationChapter 2. Drawing Sketches for Solid Models. Learning Objectives
Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various
More informationUsing the TWAIN Datasource
Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 2 Using the TWAIN Datasource... 4 How do I begin?... 4 Creating a new Setting Shortcut... 5 Changing
More information1. What is SENSE Batch
1. What is SENSE Batch 1.1. Introduction SENSE Batch is processing software for thermal images and sequences. It is a modern software which automates repetitive tasks with thermal images. The most important
More informationCreate styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.
NOTES Module 03 Settings and Styles In this module, you learn about the various settings and styles that are used in AutoCAD Civil 3D. A strong understanding of these basics leads to more efficient use
More informationCHAPTER 15. Cross Section Sheets. None, except batch processing of an input file.
CHAPTER 15 Cross Section Sheets 15.1 Introduction Objectives Project Manager Menu Bar Application Learn the procedures for laying out cross section sheets. Cross Section Sheets None, except batch processing
More informationDeltaCad and Your Horizontal Altitude Sundial Carl Sabanski
1 The Sundial Primer created by In the instruction set SONNE and Your Horizontal Altitude Sundial we went through the process of designing a horizontal altitude sundial with SONNE and saving it as a dxf
More informationAEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
More information84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don
Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions.
More informationSection 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics
Section 1 Introduction and Review Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Drawing Assignments: NCAA Basketball Court Plot Style Table (Check-off)
More informationHAM RADIO DELUXE SATELLITES A BRIEF INTRODUCTION. Simon Brown, HB9DRV. Programmer- in- C hief
HAM RADIO DELUXE SATELLITES A BRIEF INTRODUCTION Simon Brown, HB9DRV Programmer- in- C hief Last update: Sunday, November 30, 2003 User Guide The IC-703s used in this project were supplied by Martin Lynch
More informationTABLE OF CONTENTS. INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6
TABLE OF CONTENTS INTRODUCTION...5 Advance Steel...5 Where to find information?...6 Contacting technical support...6 INSTALLATION...7 System requirements...7 Starting the installation...7 STARTING ADVANCE
More informationUser Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
More informationCorporation. Tutorial #1 Starting Geocode LOS
Micropath Corporation 2023 Montane Drive East Tel: 303.526 5454 Web: www.micropath.com Golden, Colorado 80401 8099 Fax: 303.526 0202 E Mail: sales@micropath.com Download GeoCode LOS : www.micropath.com/downloads/software/geocodelos/
More informationTas Engineering Training Workbook 1
Tas Engineering Training Workbook 1 Tas 3D Modeller Tas Manager Your Tas Manager contains two main folders: a Tas folder and a Tas Data folder. See the directory-tree on the left-hand side above. If you
More informationMRI Grid. The MRI Grid is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board.
Abstract The is a tool in MRI Cell Image Analyzer, that can be used to associate measurements with labeled positions on a board. Illustration 2: A grid on a binary image. Illustration 1: The interface
More informationGIS Module GMS 7.0 TUTORIALS. 1 Introduction. 1.1 Contents
GMS 7.0 TUTORIALS 1 Introduction The GIS module can be used to display data from a GIS database directly in GMS without having to convert that data to GMS data types. Native GMS data such as grids and
More informationIntroduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1
AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an
More informationAnalyzing Hemispherical Photographs Using SLIM software
Analyzing Hemispherical Photographs Using SLIM software Phil Comeau (April 19, 2010) [Based on notes originally compiled by Dan MacIsaac November 2002]. Program Version: SLIM V2.2M: June 2009 Notes on
More information4) Click on Load Point Cloud to load the.czp file from Scene. Open Intersection_Demo.czp
Intersection 2D Demo 1) Open the Crash Zone or Crime Zone diagram program. 2) Click on to open the CZ Point Cloud tool. 3) Click on 3D/Cloud Preferences. a) Set the Cloud File Units (Feet or Meters). b)
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More informationv. 8.0 GMS 8.0 Tutorial GIS Module Shapefile import, display, and conversion Prerequisite Tutorials None Time minutes
v. 8.0 GMS 8.0 Tutorial Shapefile import, display, and conversion Objectives Learn how to import and display shapefiles with and without ArcObjects. Convert the shapefiles to GMS feature objects. Prerequisite
More informationModule 10. Assemblies and Corridors. Objectives
NOTES Module 10 Assemblies and Corridors In this module, you learn to work with assemblies and corridors in AutoCAD Civil 3D. Corridor models are used to represent road designs in Civil 3D. An assembly
More informationUsing the TWAIN Datasource
Using the TWAIN Datasource Starting the Scan Validation Tool... 2 The Scan Validation Tool dialog box... 2 Using the TWAIN Datasource... 4 How do I begin?... 4 Creating a new Setting Shortcut... 5 Changing
More informationLab #10 Digital Orthophoto Creation (Using Leica Photogrammetry Suite)
Lab #10 Digital Orthophoto Creation (Using Leica Photogrammetry Suite) References: Leica Photogrammetry Suite Project Manager: Users Guide, Leica Geosystems LLC. Leica Photogrammetry Suite 9.2 Introduction:
More informationTDS Ranger Survey Pro CE Version RTK Base on known Control Point. RTK Rover - Localization with Control Points.
TDS Ranger Survey Pro CE Version 2.1.8 RTK Base on known Control Point. RTK Rover - Localization with Control Points. Pre-load control Coordinates and appropriate NGS Geoid 99/96 data files into the Ranger
More informationImaging Features Available in HTML5. it just makes sense
Imaging Features Available in HTML5 it just makes sense August, 2018 Imaging Features Available in HTML5 As part of the 5.2 SP1 release, the Images functionality is now available in HTML5 and provides
More informationStream Design: From GEOPAK to HEC-Ras
10 Stream Design: From GEOPAK to HEC-Ras OBJECTIVES Provide you with a general understanding of GEOPAK Cross Section Reports and their capability to generate geometric information for the HecRas program.
More informationDeck Tutorial. Decks and Porches. Drawing Decks
Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.
More informationHAM RADIO DELUXE SATELLITES A BRIEF INTRODUCTION. Simon Brown, HB9DRV. Programmer- in- C hief
HAM RADIO DELUXE SATELLITES A BRIEF INTRODUCTION Simon Brown, HB9DRV Programmer- in- C hief Last update: Sunday, September 26, 2004 User Guide The IC-703s and IC-7800s used in this project were supplied
More informationMinolta Scanner Plugin
Minolta Scanner Plugin For a list of Minolta digitizers and Geomagic software products with which this plugin is compatible, see Release Notes for Geomagic Minolta Plugin 7.6.0.3. Copyright 2005, Raindrop
More informationFoamWorks Introduction. David Mrozinski 848 W. Borton Road Essexville, Michigan 48732
FoamWorks 4.0 Introduction Quick Start Registration Registration Menus Files Save a Cut Profile Load a Cut Profile Close Profile/G-code Restore Default Cut Profile Exit Setup Setup Parameters Generate
More informationANTENNA DESIGN FOR FREE USING MMANA-GAL SOFTWARE
ANTENNA DESIGN FOR FREE USING MMANA-GAL SOFTWARE 1. AVAILABLE ANTENNA DESIGN SOFTWARE EZNEC and 4nec2 are based upon the Numerical Electromagnetics Code, or NEC, which is a popular antenna modelling system
More informationAlibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1
Alibre Design Tutorial: Loft, Extrude, & Revolve Cut Loft-Tube-1 Part Tutorial Exercise 5: Loft-Tube-1 [Complete] In this Exercise, We will set System Parameters first, then part options. Then, in sketch
More informationOhio Department of Transportation, VBA Documentation
Contents 1.1 Current Versions... 2 1.2 Overview... 3 1.3 Supporting Files and Standards... 4 1.3.1 ODOT_Drainage.cel... 4 1.3.2 ODOT2013.ddb... 5 1.4 ODOT_StormSewerPlan2013.mvba... 6 1.4.1 Mode: Place
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More informationISIS A beginner s guide
ISIS A beginner s guide Conceived of and written by Christian Buil, ISIS is a powerful astronomical spectral processing application that can appear daunting to first time users. While designed as a comprehensive
More informationInserting and Creating ImagesChapter1:
Inserting and Creating ImagesChapter1: Chapter 1 In this chapter, you learn to work with raster images, including inserting and managing existing images and creating new ones. By scanning paper drawings
More informationTRBOnet Enterprise/PLUS
TRBOnet Enterprise/PLUS Bluetooth-based Indoor Positioning User Guide Version 5.2 World HQ Neocom Software 8th Line 29, Vasilyevsky Island St. Petersburg, 199004, Russia US Office Neocom Software 15200
More informationTeledyne Marine Acoustic Imagining
RESON SeaBat high performance sonars for long range object detection and MCM applications Navigation, object avoidance & up close inspection with BlueView Greg Probst Sales Manager, Defense Teledyne Marine
More informationCorridors. To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.
Corridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment: (1) Alignments > Create
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More information[Use Element Selection tool to move raster towards green block.]
Demo.dgn 01 High Performance Display Bentley Descartes has been designed to seamlessly integrate into the Raster Manager and all tool boxes, menus, dialog boxes, and other interface operations are consistent
More informationHexagons for Art and Illusion Part II Get ready Start a new project FILE New Open Faced Cube Import the hexagon block LIBRARIES
Hexagons for Art and Illusion Part II In our last lesson, we constructed the perfect hexagon using EasyDraw. We built a six pointed star, a solid faced cube, and put the cube inside the star. This lesson
More informationTouch Probe Cycles itnc 530
Touch Probe Cycles itnc 530 NC Software 340 420-xx 340 421-xx User s Manual English (en) 4/2002 TNC Models, Software and Features This manual describes functions and features provided by the TNCs as of
More informationThe ideal K-12 science microscope solution. User Guide. for use with the Nova5000
The ideal K-12 science microscope solution User Guide for use with the Nova5000 NovaScope User Guide Information in this document is subject to change without notice. 2009 Fourier Systems Ltd. All rights
More informationGeometry Controls and Report
Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for
More informationCIC ENGINEERING 345 CENTER STREET EAST PEORIA, IL PH FAX µmpis Control Software
µmpis Control Software Overview The µmpis Control software package allows for a user to control the operation of the umpis unit with a PC. The PC and the umpis unit are connected together using a RS232
More informationADMS 5 MapInfo Link. User Guide CERC
ADMS 5 MapInfo Link User Guide CERC ADMS 5 MapInfo Link User Guide November 2012 Cambridge Environmental Research Consultants Ltd 3 King s Parade Cambridge CB2 1SJ Telephone: +44 (0)1223 357773 Fax: +44
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationVersion 9 Tutorial and User Guide
Version 9 Tutorial and User Guide 800-989-4243 214-340-9436 support@vertigraph.com www.vertigraph.com 1 Table of Contents A. Overview... 4 B. About the SiteWorx/OS Window... 4 C. File Types Raster, Vector
More informationENVI Tutorial: Orthorectifying Aerial Photographs
ENVI Tutorial: Orthorectifying Aerial Photographs Table of Contents OVERVIEW OF THIS TUTORIAL...2 ORTHORECTIFYING AERIAL PHOTOGRAPHS IN ENVI...2 Building the interior orientation...3 Building the exterior
More informationGEOPAK V8i SELECTseries 1, Road 2
GEOPAK V8i SELECTseries 1, Road 2 Ohio Department of Transportation October, 2012 Ohio Department of Transportation GEOPAK Road Training Guide for MicroStation V8i SELECTseries 1, October, 2012 The information
More informationVisualCAM 2018 TURN Quick Start MecSoft Corporation
2 Table of Contents About this Guide 4 1 About... the TURN Module 4 2 Using this... Guide 4 3 Useful... Tips 5 Getting Ready 7 1 Running... VisualCAM 2018 7 2 About... the VisualCAD Display 7 3 Launch...
More informationModeling 2. Draw Storefront Curtain Wall. Align. Draw Storefront Curtain Wall
STEP 1: Back to your Revit fi le _ from the Project Browser double-click on Level 1 _ type shortcut WA (wall) _ set the type of wall to Storefront _ draw a curtain wall on the South Wall as shown in image
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationLIGHT STUDIO 485. Software Instrrctions Mancal. Read trhe mancal tarefclly before operaing trhis software
LIGHT STUDIO 485 Software Instrrctions Mancal Read trhe mancal tarefclly before operaing trhis software PSI, spol. s r. o., Drásov 470, 664 4 Drásov, Czeth Repcblit FAX: +40 5 440 90, TEL: +40 5 440 0,
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationAutodesk Medical Center
Autodesk Medical Center Page 1 Contents Autodesk Medical Center... 1 Revit Projects... 3 Exercise 1 Create a new project file... 3 Datum Elements... 4 Exercise 2 Add Grids... 5 Exercise 3 Edit Levels...
More informationDisplay and Draw Features
CHAPTER 7 Display and Draw Features 7.1 Overview Feature / Function Tool Display or draw DTM features, such as contours, triangles, lattices, voids, islands, etc. DTM Menu Bar Load > DTM Features GEOPAK
More informationGetting Started with. Vectorworks Architect
Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program
More informationUSER MANUAL Edition Rev.1 Copyright 2010 P.A.S.I. All Rights Reserved
POLARES ELECTRICAL IMAGING SYSTEM IN ALTERNATE CURRENT USER MANUAL 2013 Edition Rev.1 Copyright 2010 P.A.S.I. All Rights Reserved Tel.+39 011 650.70.33 Fax +39 011 658.646 E-MAIL sales@pasisrl.it 08/07/13
More informationModule 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece
Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece
More informationDeltaCad and Your Cylinder (Shepherd s) Sundial Carl Sabanski
1 The Sundial Primer created by In the instruction set SONNE and Your Cylinder Shepherd s Sundial we went through the process of designing a cylinder sundial with SONNE and saving it as a dxf file. In
More informationObjectives Learn how to import and display shapefiles in GMS. Learn how to convert the shapefiles to GMS feature objects. Required Components
v. 10.3 GMS 10.3 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles in GMS. Learn how to convert the shapefiles to GMS feature objects. Prerequisite
More informationMill OPERATING MANUAL
Mill OPERATING MANUAL 2 P a g e 7/1/14 G0107 This manual covers the operation of the Mill Control using Mach 3. Formatting Overview: Menus, options, icons, fields, and text boxes on the screen will be
More informationBOOK BUILDING. for beginners. Lightroom Tutorial by Mark Galer
BOOK BUILDING for beginners Lightroom Tutorial by Mark Galer Contents Part One: Preparing the Book Part Two: Page Layout Design Ideas Create a Collection Choose your Images Sequence your Images Title your
More informationBasic Tutorials Series: Import A Photograph. RenoWorks Support Team Document #HWPRO0003
Basic Tutorials Series: Import A Photograph RenoWorks Support Team Document #HWPRO0003 Import A Photograph 2 1 Import Your Own Photograph The Photo Import Wizard The Photo Import Wizard is the first tool
More information