Example Plans: Business Signs (Not For Construction)

Transcription

1 Plans: Business s Site Plan utility easement Proposed Awning Proposed Freestanding Street Name Proposed Wall C L N 123 Historic Way Indianapolis, IN Basic Elements of a Site Plan 1.North Arrow 2.Scale of plan 3.Address of the property 4.Property boundaries with dimensions 5.Locations of any easements, right of ways, & setbacks 6.Centerline of adjacent streets 7.Existing signs 8.Outline of all improvements and structures (existing & proposed) with dimensions and the distances to nearest boundaries. Examples include: existing signs, septic systems, fences, pools, wells, decks, driveways, sidewalks, sheds, parking areas, and utility locations. Scale: 1 = 40 Current Right of Way Boundary Proposed Right of Way Boundary Note: Sidewalks, utility poles, alleys, fences, internet maps, and other features are not reliable means of determining the location of property boundaries. Please reference your property deed, plat map, or prior survey of the property.

2 Legal Description LEGAL DESCRIPTION Part of the west 1/3 of the Northwest Quarter of Section 17, Township 99 North, Range 15 East in Marion County, Indiana more particularly described as follows: Commencing at the Northwest Corner of said Third Quarter section; thence south East feet; thence South West feet to the true point of beginning of the parcel herein described; thence from said point of beginning North upon and along the west line of said Third Quarter Section feet to the center of Bob s Ditch; thence along a meandering line and with the center of Bob s Ditch to a point which is 192 feet East of the West line of said Third Quarter Section; thence South parallel with the West line of said Third Quarter Section 2,000 feet to a point on the South line of said Third Quarter Section; thence West feet to the point of beginning, containing 71 acres, more or less. Note: The legal description for your project may be a subdivision name with lot number (or series of lot numbers) as opposed to the metes and bounds legal description above.

3 Pylon Elevation Pylon 8 x 6 = 48sf Face 2 Scale: 1/2 = 1

4 Pole Elevation 8 8 Pole 8 x 8 = 64sf Face 17 9 min height Scale: 1/4 = 1

5 Ground Elevation 5 4 Max Ground 2.5 x 5 = 12.5sf 1 Scale: 1/2 = 1

6 Awning Elevations Awning Window 9 Min Height Front Door Min Height Side Scale: 1/8 = 1

7 Wall / Window Elevation 4 8 Wall 4 x 8 = 32sf Area Overhead Door 15 Window Window Scale: 1/8 = 1 Window Max 25% of window area

8 Minimum Requirements for Obtaining a Permit The Regulations of the Consolidated City of Indianapolis/Marion County apply to all property located within Marion County, Indiana. As such, all signs in Marion County must be permitted according to the Regulations of Indianapolis/Marion County. All applicable regulations can be obtained from Chapter 734 of the Revised Code, which is published in the online library at The applicant should be aware of the Regulations for Indianapolis/Marion County prior to drawing the plans necessary for application for a sign permit. Completed Business Permit Application In addition to a completed Business Permit Application, two (2) copies of each of the following documents are required. 1. The applicant must submit proof of consent by the property owner to apply for a sign permit. 2. Site plan requirements Must be drawn to scale of 1 inch = 30 feet or an acceptable Engineer scale. (1 = 20, 1 = 40 ) Must indicate all dimensions of the site. Centerlines and right-of-way lines of all public and private streets or alleys and easements. Proposed location of the sign(s) including the proposed setbacks from leading edge of sign to street right-of-way and dimension to the side property line for freestanding signs. Location of all existing buildings and sign structures. Location of any easements of record which affect the site (electric, drainage, sewer, gas, etc.) All parking spaces, driveways, and maneuvering areas that may be affected by the erection of the sign. The legal description of the property or integrated center. 3. Elevations - Must be drawn to scale of ¼ = 1 or an acceptable architect scale. A. Freestanding s All dimensions of the sign face, base and/or support, and the overall height above grade. Lettering, copy, logo, insignia or other depiction to be placed on the sign. B. Building s All dimensions of the sign face and the overall height above grade. Lettering, copy, logo, insignia or other depiction to be placed on the sign. Complete elevation of the facade of the building upon which the sign is to be placed, including all dimensions thereof. Projection of proposed sign from wall (if projecting sign). NOTE: If a wall sign is to be located in an integrated center, industrial park, platted subdivision or apartment complex for which and overall site plan and building elevations are on file with the, a detailed site plan of the overall site will not be required. In such an event, the applicant will be required to submit only a general site plan showing the location of the building that the sign will be placed on and a detailed elevation of the area immediately surrounding the proposed location of the wall sign. NEGLECTING THESE ITEMS WILL CAUSE ADDITIONAL TRIPS TO Please note: These example THE plans PERMITTING are only a guide OFFICE to the AND/OR plans you will PROJECT need in order DELAYS. to obtain on premises business