ADVANCED. Universal Sheet Metal Testing Machine Model 142

Size: px
Start display at page:

Download "ADVANCED. Universal Sheet Metal Testing Machine Model 142"

Transcription

1 ADVANCED Universal Sheet Metal Testing Machine Model 142 ASTM , ISO , EN ISO 20482, DIN EN 1669 Applications Qualitest s Universal Sheet Metal Testing Machine with electro-hydraulic drive, fully automatic test sequence and switch off at specimen failure, max. drawing forces 200kN or 400kN - Model and Model This Testing Machine can be used not only to perform effortlessly, quickly and accurately all important and known deep drawing tests for ferrous and non-ferrous metals, but it is also designed for a large number of additional technological investigations: Cupping Test in accordance with Deep Drawing Cup Test in accordance with On sheet and strip Square Cup Test (40 40 mm) Bore Expanding Test (KWI Test) Bore Expanding Test (ISO 16630) Determination of the Forming Limit Curves (FLC) (not available for Basic) Deep Drawing Test with Blankholder Quick Release (for Earing Test) Deep Drawing Test with Preselected Punch Stroke Deep Drawing Test at High Temperatures up to 550 C Cupping Test for Lacquer and Paint in accordance with DIN ISO 1520 Stamping Lacquer Test and Deep Drawing Cup Test on Coil Coatings Special Requirements on request.

2 Description The Testing Machine is driven electro-hydraulically. The test sequence can be controlled automatically or manually, as desired. A programme logic control is used to control the functions of the machine. Drawing force and blankholder force as well as the drawing punch stroke are displayed digitally. The triple-acting hydraulic system in conjunction with the general design results in the following cost saving simplifications: Blanking press in the test head Hydraulic cup ejector Fully-automatic test sequence. Further technical advantages: Cylinder head with bayonet lock Permitting direct access to drawing dies, blanking rings, blank holders etc. and quick and convenient changing of the drawing and blanking tools. Infinitely variable drawing speed Once set it remains constant throughout the drawing movement, independent of any change of load Cardanic drawing die retention Ensures the consistent, parallel clamping of the specimen, independent of variations in thickness. The Sheet Metal Testing Machine, Model 142, was developed not only for testing as a means for continuous production control, using standardised and other established methods, but also for research into all aspects of testing of sheet metal for deep drawing by studying all that is relevant to sheet metal forming. Additional Control Functions and Test Methods Upon request, Model 142-Basic, can be equipped with analogue outputs for connection of a PC (incl. software pack) PC and Software Package A special software programme has been developed for the modified cupping test. The signals for the drawing punch stroke, the drawing force and the blankholder force can also be transmitted to a PC via an appropriate amplifier and A/D converter. A force/displacement diagram appears on the VDU. For conducting the Deep Drawing Cup Test, for example in accordance with DIN , a special software pack is available producing a force/ displacement diagram over the full forming range as well as numerical results for drawing punch stroke, drawing force and blankholder force.

3 Hot Drawing Equipment up to 550 C A further valuable addition to the possibilities offered is provided by the additional hot drawing equipment. In this, the blankholder and drawing die are heated in an insulated container and special provision is made to enable these then to be set up without difficulty on the machine. An electronic temperature measuring device is incorporated, and on this the preset intended temperature and the current measure temperature are displayed. The preset temperature can be set up between 25 C to 550 C, and in the test, the temperature remains constant within ± 1 C. Hot Drawing Equipment up to 700 C (Model ) To determine also Forming Limited Diagrams at higher temperatures, the temperature accessory for Mod is the appropriate solution. Tests according Nakajima- and Marziniak can be performed in order to evaluate FLC / FLD. This accessory will be assembled directly into the test cylinder. Hereby, the complete tool is heated to the desired temperature together with the test specimen, and then the deformation will be performed. By using a cooling connection the jacket of the device can be cooled, thus the thermal load on the environment is minimized. The corresponding electronic control units are placed in a separate cabinet next to the machine. The opening in the test head of the hot-drawing device is manufactured, that optical 3D measurement systems can document and evaluate the deforming process. These Hot Drawing Equipment can be expanded for temperatures up to 950 C. HEXRASCAN Camera with tripod and lightning, for rupture detection according to ISO hole expansion test, incl. appropriate recording and analysis software Test Software for the Modified Cupping Test The Cupping Test (in accordance with EN ISO 20482, and corresponding to national and international standards) is a test providing simple and quick means of assessing the multi-axis ductility of sheet and strip using a procedure that relates closely to practical processes. The depth range reached at failure is, however, only an initial guide to the evaluation of the forming properties of the sheet metal. The Universal Sheet Testing Machine, Model 142-Basic, (as is the case with all the modern electro-hydraulic Testing Machines) can as an option be equipped with analogue measuring outputs for drawing punch movement, drawing force, and blankholder force. These analogue measuring signals are transmitted to a PC via an integrated amplifier and an A/D converter and a force/displacement diagram appears on the VDU.

4 Data Evaluation System with User Test Software The software enables the continuous acquisition of measured values with simultaneous display of the force/displacement diagram throughout the forming process. The data recording will be stopped after the maximum force is achieved in a cupping test or the deep draw test is finished. This data is presented immediately on the VDU on completion of the test alongside the graph of the force against displacement. Either a printout can then be obtained and the data saved or the data can be easily transferred to other evaluation programmes (e.g. Microsoft Excel). The scope of supply includes PC, VDU and printer. Universal User Software The software enables the control, adjustment, documentation and filing of measuring data of the sheet metal testing machine. Software for recording of force-displacement diagrams such as drawing force and blank holder force, stroke. Creation of scripts (test sequences); pre-setting of freely selectable parameters such as drawing and blank holder force as well as drawing speed. The measuring system integrated in the sheet metal testing machine is designed in modular system with analogue and digital inputs and outputs. Hereby drawing force, blank holder force and stroke are acquired. The data will be exchanged with the PC via a USB connection. This programme enables to create and evaluate test sequences for tests e.g. deep-drawing cup test, bore expanding test, bulge test, deep drawing test (only in connection with the proportional valve technique). The scope of supply includes PC, VDU and printer.

5 Technical Specifications

Universal Sheet Metal Testing Machine Model 142

Universal Sheet Metal Testing Machine Model 142 Bore Expanding ISO 16630 Deep Drawing Cup Test Universal Sheet Metal Testing Machine Model 142 Square Deep Drawing Cup Test Software for Data Evaluation and Processing testing equipment for quality management

More information

Sheet Metal Testing Machine Model 134

Sheet Metal Testing Machine Model 134 ERICHSEN Cupping Test Deep Drawing Cup Test Sheet Metal Testing Machine Model 134 Square Deep Drawing Cup Test Bore Expanding Test testing equipment for quality management Technical Description Data logger

More information

Universal Sheet Metal Testing Machines. for Research, Development and In-process Testing

Universal Sheet Metal Testing Machines. for Research, Development and In-process Testing Universal Sheet Metal Testing Machines for Research, Development and In-process Testing Application - Example: Automotive Industry Models - Technical Data - Additional Control Functions and Test Methods

More information

testing equipment for quality management

testing equipment for quality management testing equipment for quality management SHEET METAL TESTING Deep-drawing test Sheet metal testing Surface testing Corrosion testing Materias testing ERICHSEN - The absolute reliability of your test results

More information

ALFRA PRESS. Made in Germany by ALFRA

ALFRA PRESS. Made in Germany by ALFRA 52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,

More information

Product features and advantages

Product features and advantages Product features and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Other DC voltage applications Operating voltage determined by housing color Simplifies

More information

Work Pieces The EHRT Punching Machines of the Standard Line rapidly processes flat profile bars up to 16 mm thickness and 200 mm width.

Work Pieces The EHRT Punching Machines of the Standard Line rapidly processes flat profile bars up to 16 mm thickness and 200 mm width. Holecut 40-6 CNC Holecut 40-10 CNC Punching Machine Standard Line Stand: 10/ 2014 EHRT Punching Machine Standard Line - Advantages The EHRT Punching Machines of the Standard Line was developed especially

More information

Computer Simulated and Experimental Verification of Tooling for Progressive Deep Drawing.

Computer Simulated and Experimental Verification of Tooling for Progressive Deep Drawing. 8 th International LS-DYNA Users Conference Metal Forming (1) Computer Simulated and Experimental Verification of Tooling for Progressive Deep Drawing. Peter Kostka, Peter Cekan Slovak University of Technology

More information

Datasheet. Variable Impact Tester. Elcometer 1615

Datasheet. Variable Impact Tester. Elcometer 1615 Variable Impact Tester This simple to use gauge is ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling), and is suitable for use on both direct and indirect test

More information

Elasticity & Deformation. Elcometer 1615 Variable Impact Tester. elcometer.com 1

Elasticity & Deformation. Elcometer 1615 Variable Impact Tester. elcometer.com 1 Variable Impact Tester elcometer.com 1 Variable Impact Tester This simple to use gauge is ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling), and is suitable for

More information

REMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350

REMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350 REMA FLAT BLADE CONTACT CONNECTORS SR50 SR175 SR350 Productfeatures and advantages Reliable power connection solution for Electric vehicle batteries Battery chargers Forklift trucks Other DC voltage applications

More information

PAINT BORER 518 MC PAINTXPLORER 548

PAINT BORER 518 MC PAINTXPLORER 548 PAINT BORER 518 USB PAINT BORER 518 MC PAINTXPLORER 548 PAINT BORER 518 USB Thickness measurements in accordance with the standardised wedge cut method PAINT BORER 518 MC PAINTXPLORER 548 testing equipment

More information

FUNDAMENTAL MANUFACTURING PROCESSES. Sheet Metal Stamping Dies & Processes-SD

FUNDAMENTAL MANUFACTURING PROCESSES. Sheet Metal Stamping Dies & Processes-SD FUNDAMENTAL MANUFACTURING PROCESSES Sheet Metal Stamping Dies & Processes-SD SCENE 1. SD20A, CGS: Dies & Die Functions white text, centered on background FMP BKG, motion background SCENE 2. SD20A, SME4311,

More information

PBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT

PBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 Parts up to 8 meters wide, of any length

More information

PBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT

PBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 3 Parts up to 8 meters wide, of any length

More information

CNC Punching Machine Holecut 40-9 Professional

CNC Punching Machine Holecut 40-9 Professional CNC Punching Machine Holecut 40-9 Professional CNC Punching Machine Holecut 40-9 Professional All EHRT punching machines in the Holecut Professional Line feature three CNC controlled axes. They are designed

More information

Bedienungsanleitung - Operating Instructions - Mode d emploi

Bedienungsanleitung - Operating Instructions - Mode d emploi Bedienungsanleitung - Operating Instructions - Mode d emploi LAMINATED BUSBAR MACHINING UNIT 2017 Alfra GmbH II. Industriestraße 10 D-68766 Hockenheim Tel.: +49 (0)6205-3051-0 Fax: +49 (0)6205-3051-150

More information

Technical News Bulletin

Technical News Bulletin Technical News Bulletin October 2006 Pantograph Baffle Arm 1. System Description Emhart Glass Pantograph Baffle Arm represents a progressive engineering development for smoother, more efficient baffle

More information

Max. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers:

Max. Swing diameter over the slide: Max. Turning diameter with MultiSuisse: Max. Turning diameter with tool turret: distance between centers: CYCLE-CONTROLLED PRECISION LATHE SE 320 NUMERIC Description The SE 320 NUMERIC machine is a universal CNC-lathe machine with digitally controlled drives and a cycle control for the processing of bottles

More information

STAM P I N G J O U R NAL

STAM P I N G J O U R NAL A hopper containing bulk fasteners feeds into a bowl; the bowl feeds the fasteners into a track; and the track feeds them into the tooling, which then singulates them and sends them to the press as the

More information

Fast, precise, powerful

Fast, precise, powerful Fast, precise, powerful CNC multi-spindle automatics of the PC series 02 Schütte PC Series Compact design: hydraulic endworking slide feed unit with linear measuring system and control valve Material removal

More information

CATALOG TOOL STEEL ELECTRIC

CATALOG TOOL STEEL ELECTRIC CATALOG TOOL STEEL ELECTRIC 1/26 BENDING MACHINES Biegeboy bending machine For bending panels with turned-up edges up to a turn-up height of 50mm. Very small radii are produced in several passes. 40 cm

More information

Metal Working Processes

Metal Working Processes Metal Working Processes Bachelor of Industrial Technology Management with Honours Semester I Session 2013/2014 CLASSIFICATION OF MANUFACTURING PROCESSES TOPIC OUTLINE What is Sheet Metal? Sheet Metalworking

More information

MANUFACTURING PROCESSES

MANUFACTURING PROCESSES 1 MANUFACTURING PROCESSES - AMEM 201 Lecture 9: Sheet Metal Cutting & Forming Processes DR. SOTIRIS L. OMIROU Sheet Metal Cutting & Forming Processes - Application field- Sheet metal processing is an important

More information

Mold Design. 5. Mold Structure. Bong-Kee Lee School of Mechanical Engineering Chonnam National University

Mold Design. 5. Mold Structure. Bong-Kee Lee School of Mechanical Engineering Chonnam National University 5. Mold Structure Bong-Kee Lee Chonnam National University the simplest and most reliable design has the fewest number of moving parts and is more straightforward to manufacture and run in production is

More information

Joining Metals with Stamping Dies

Joining Metals with Stamping Dies 733563AA Joining Metals with Stamping Dies A Die Builder s Guide to BTM s sheet metal clinch joining systems. A supplement for BTM s Tog-L-Loc and Lance-N-Loc Tooling Catalogs to assist in the proper application

More information

ScienceDirect. Formability of pure titanium sheet in square cup deep drawing

ScienceDirect. Formability of pure titanium sheet in square cup deep drawing Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 81 (2014 ) 881 886 11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014, Nagoya Congress

More information

Joining Metals with Stamping Dies

Joining Metals with Stamping Dies 733563 Joining Metals with Stamping Dies A Die Builder s Guide to BTM Corporation s sheet metal clinch joining systems. A supplement for BTM Corporation s Tog-L-Loc and Lance-N-Loc Tooling Catalogs to

More information

Type A - Clamping force axially applied to the clamping edge. Extending and simultaneous lowering/clamping

Type A - Clamping force axially applied to the clamping edge. Extending and simultaneous lowering/clamping Wedge clamp, double-acting, type A for dies with straight clamping edge Type A - Clamping force axially applied to the clamping edge Application: safe clamping of dies with straight clamping edge for clamping

More information

Elcometer Conical Mandrel Bend Tester

Elcometer Conical Mandrel Bend Tester English Elcometer 1510 Conical Mandrel Bend Tester Operating Instructions English is a registered trademark of Elcometer Instruments Ltd. All other trademarks acknowledged. Copyright Elcometer Instruments

More information

PRECISION CUTTING MICRACUT 202

PRECISION CUTTING MICRACUT 202 PRECISION CUTTING MICRACUT 202 MICRACUT 202 MICRACUT 202 precision cutters are used for precise and deformation-free cutting of Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials,

More information

TOOLS/ werkzeugtechnik

TOOLS/ werkzeugtechnik TOOLS werkzeugtechnik EDITORIAL In October 2006, ips-werkzeugtechnik took over the punching technology segment of DE-STA-CO Europe & Co. Werkzeugtechnik, which has earned us a new strategic position on

More information

Design and Analysis of Press Tool Assembly

Design and Analysis of Press Tool Assembly Design and Analysis of Press Tool Assembly Raveendra M.Tech Student ABSTRACT Press working may be defined as a chip less manufacturing process by which various components are made from sheet metal. This

More information

Integrated Cell. Peripheral equipment for Evolution & Carat.

Integrated Cell. Peripheral equipment for Evolution & Carat. Integrated Cell. Peripheral equipment for Evolution & Carat. The integrated future for die casting cells with Bühler peripheral equipment. High productivity requires casting cells provided with die casting

More information

RatioLine G200/G300. Turn mill centers

RatioLine G200/G300. Turn mill centers RatioLine G200/G300 Turn mill centers RatioLine G200/G300 Standard for us - future for others INDEX turn-mill centers set In case of collision, the Your system benefits: Auxiliary milling spindle for the

More information

Tools for other contacts Tools for FOC contacts Crimping machine TC-C Crimping machine TK-M

Tools for other contacts Tools for FOC contacts Crimping machine TC-C Crimping machine TK-M Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han-Yellock... 99.06 for contacts Han C... 99.09 for contacts D-Sub... 99.11 for other contacts... 99.12 for FOC contacts...

More information

adaptivemechanical adaptive

adaptivemechanical adaptive Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270

More information

Pencil Hardness Tester BEVS 1301

Pencil Hardness Tester BEVS 1301 Pencil Hardness Tester BEVS 1301 User Manual PAGE 1 1. Introduction BEVS pencil hardness tester offers an easy to use method for the determination of film hardness for a coating applied to a flat substrate,

More information

5-axis clamping system compact

5-axis clamping system compact 5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed

More information

Systems. Dynamic Test. Electrodynamic Vibration Test Systems

Systems. Dynamic Test. Electrodynamic Vibration Test Systems Systems 6-20 kn air cooled Electrodynamic Vibration Test Systems SW2-6200APP ( 6KN) SW2-6230APP ( 6KN) SW2-1240APP (10KN) SW2-2320APP (20KN) SW2-2LS3-340APP (20KN) Dynamic Test Technical subject to changes

More information

Global Expansion of Human Activity and The Wave of Motorization

Global Expansion of Human Activity and The Wave of Motorization About Fine Blanking Global Expansion of Human Activity and The Wave of Motorization Enhancing the productivity of international automobile manufacturers In the attractive international automobile manufacturing

More information

Clinch Tooling. Standard Punches, Dies, Strippers, & Holders for clinching sheet metal

Clinch Tooling.  Standard Punches, Dies, Strippers, & Holders for clinching sheet metal 733440BC Clinch Tooling Standard Punches, Dies, Strippers, & Holders for clinching sheet metal Strong mechanical joints without external fasteners or welding Commonly used to join harder materials & multiple

More information

Product Information. makroxtens II

Product Information. makroxtens II CTA: 44098 44269 PI 220 0119 Applications is a universal, high resolution extensometer for tensile, compression, flexure and cyclic tests on plastics, composites, hard foam materials and metals that have

More information

PRESS & PRESS WORK

PRESS & PRESS WORK Topic and Contents Hours Marks 2.1 Introduction 08 Marks Materials used in press work for automobile applications. Classifications of presses and terminology used in presses Major parts of Fly press 2.2

More information

Schleuniger PowerStrip 9500 Automatic Wire Cutting and Stripping Machine

Schleuniger PowerStrip 9500 Automatic Wire Cutting and Stripping Machine Schleuniger PowerStrip 9500 Automatic Wire Cutting and Stripping Machine Wire Cutting and Stripping Machine PowerStrip 9500 For Flexible, Powerful Wire Processing Based on its extensive know-how in wire-stripping

More information

TOOL DESIGN - MANUFACTURING DESIGN SPECIFICATIONS FOR TOOLING AND EQUIPMENT SECTION H - DIE DESIGN TABLE OF CONTENTS. H.1 General...

TOOL DESIGN - MANUFACTURING DESIGN SPECIFICATIONS FOR TOOLING AND EQUIPMENT SECTION H - DIE DESIGN TABLE OF CONTENTS. H.1 General... TABLE OF CONTENTS H.1 General...Page 2 H.2 General Die Layout...Page 2 H.3 General Die Features...Page 2 H.4 Specific Die Type Features...Page 5 H.5 Special Punches and Die Bushings...Page 6 H.6 Wire E.D.M...Page

More information

20 % OFF 30 % OFF NEW. Edition - While Stocks Last. 5025e Electric Stapler. VS15 Electric Paper Drill. CB180 & CB200e Comb Binders.

20 % OFF 30 % OFF NEW. Edition - While Stocks Last. 5025e Electric Stapler. VS15 Electric Paper Drill. CB180 & CB200e Comb Binders. CELEBRATE 2360-60 Anniversary Shredder Limited Edition desk-side shredder in silver. Photo-cell controlled automatic start and stop. High quality cutting shafts made special hardened steel. Includes permanent

More information

DESIGN OF DRAW DIE FOR CYLINDRICAL CUP FORMATION

DESIGN OF DRAW DIE FOR CYLINDRICAL CUP FORMATION DESIGN OF DRAW DIE FOR CYLINDRICAL CUP FORMATION Mr.Bhushan Sanjay Paysheti, Dr. Shekhar Yadgiri Gajjal Abstract For production of sheet metal parts we need various dies (press tools) which will convert

More information

5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts

5/2 Introduction. Unequipped Distribution Boards 5/4 Modular distribution boards 5/5 Add-on parts ALPHA AS Modular Distribution Boards /2 Introduction Unequipped Distribution Boards /4 Modular distribution boards / Add-on parts Assembly Kits for Unequipped Distribution Boards /6 8GK4 assembly kits

More information

OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES

OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting

More information

Quality-Management. Portable micrograph laboratory Microlab ML 3002

Quality-Management. Portable micrograph laboratory Microlab ML 3002 Quality-Management Portable micrograph laboratory Microlab ML 3002 Fully functional micrograph laboratory for creating crimp micrographs in a handy case Portable laboratory to prepare crimp cross sections

More information

Connecting elements for connecting hard-pressed steel with aluminium/steel

Connecting elements for connecting hard-pressed steel with aluminium/steel Connecting elements for connecting hard-pressed steel with aluminium/steel 1. The Tuk-Rivet punched rivet system The rivet comprises a rivet head, a shank area, one or more shank grooves and the cutting

More information

Operating manual. TruTool N 500 (1A1) english

Operating manual. TruTool N 500 (1A1) english Operating manual TruTool N 500 (1A1) english Table of Contents 1. Safety...4 1.1 General safety information...4 1.2 Specific safety information...5 2. Description...6 2.1 Correct use...7 2.2 Technical

More information

Sheet metal processing center EML Z-3510 NT EML Z-3610 NT

Sheet metal processing center EML Z-3510 NT EML Z-3610 NT Sheet metal processing center EML Z-3510 NT EML Z-3610 NT Punching technology Laser technology The new sheet metal processing center EML Z a triad of speed, flexibility and productivity The decisive answer

More information

SAWS, PIPE CUTTERS. Design. Blade

SAWS, PIPE CUTTERS. Design. Blade SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting

More information

Electronic amplifier type EV1D

Electronic amplifier type EV1D Electronic amplifier type EV1D Product documentation Modular construction Supply voltage UB: Output current IA: 10...48 V DC max. 2 A D 7831 D 09-2015-1.1 by HAWE Hydraulik SE. The forwarding and reproduction

More information

SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4945 lbs.

SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4945 lbs. SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual

More information

Washability & Abrasion. elcometer.com. Elcometer 1720 Washability & Abrasion Testers

Washability & Abrasion. elcometer.com. Elcometer 1720 Washability & Abrasion Testers elcometer.com 1 AS/NZS 1580.459.1, ASTM D 2486, ASTM D 3450, ASTM D 4213, ASTM D 4488, ASTM D 4828, ASTM F 1319, DIN 53778-2:1983, ECCA T11, EN 12956, EN 13523-11, EN 233/C3.2-A, EN 233/C3.2-B, EN 233/C3.2-C,

More information

2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y

2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main

More information

t h e c o m p a n y all From one source expert for flat profiles and bus bars

t h e c o m p a n y all From one source expert for flat profiles and bus bars t h e c o m p a n y expert for flat profiles and bus bars The EHRT product range includes complete processing (cutting, punching and bending) of bus bars. Our customers are generally companies producing

More information

Micro IRHD Laser revolution

Micro IRHD Laser revolution Micro IRHD Laser revolution Micro-IRHD Hardness tester with laser centring device and rotating sample holder for the automatic serial measure of O-rings and small rubber parts The instruments is supplied

More information

ALPHA DIN Wall-Mounted. Distribution Boards

ALPHA DIN Wall-Mounted. Distribution Boards Siemens AG 008 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quick-assembly kits Unequipped

More information

Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany.

Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. PROXXON - PD 400/CNC 1 Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. Z-axis and X-axis with recirculating ball spindles and two powerful step motors.

More information

Operating Manual. for CUTTING, PERFORATING, BENDING SLB120

Operating Manual. for CUTTING, PERFORATING, BENDING SLB120 Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...

More information

X-Shape Precise flatness measurement and control

X-Shape Precise flatness measurement and control X-Shape Precise flatness measurement and control X-SHAPE Precise X-Shape flatness measuring system with measuring rollers of the latest generation. Challenge In addition to constant strip thickness, the

More information

General catalog. BESMAK Servo-hydraulic Medium-Capacity fatigue test System with Furnace. 1 BESMAK Material Testing Machines

General catalog. BESMAK Servo-hydraulic Medium-Capacity fatigue test System with Furnace. 1 BESMAK Material Testing Machines General catalog BESMAK Servo-hydraulic Medium-Capacity fatigue test System with Furnace 1 BESMAK Material Testing Machines www.besmaklab.com 2 BESMAK Material Testing Machines www.besmaklab.com General

More information

Unit IV Drawing of rods, wires and tubes

Unit IV Drawing of rods, wires and tubes Introduction Unit IV Drawing of rods, wires and tubes Drawing is a process in which the material is pulled through a die by means of a tensile force. Usually the constant cross section is circular (bar,

More information

COPALUM Terminals and Splices (For Solid & Stranded Aluminum or Copper Wire)

COPALUM Terminals and Splices (For Solid & Stranded Aluminum or Copper Wire) Product Facts Bar Crimp Technique Terminals and Splices for aluminum-to-aluminum and aluminum-to-copper stripped wire applications Terminates stripped, stranded and solid (round or rectangular) aluminum

More information

Zero Point Clamping System. ZERO lock BALL lock

Zero Point Clamping System. ZERO lock BALL lock Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping

More information

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals

High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building

More information

CNC SYSTEMS PUNCHING SHEARING MARKING. Trilogy Machinery, Inc.

CNC SYSTEMS PUNCHING SHEARING MARKING.  Trilogy Machinery, Inc. The CNC Systems from SUNRISE are plate, angle and channel positioning systems with user-friendly interfaces. Many options are available factory-installed on Dual-Cylinder Ironworker or Punching Machines

More information

ENGLISH (mm) BENDICROP SERIES

ENGLISH (mm) BENDICROP SERIES ENGLISH (mm) BENDICROP SERIES BENDICROP SERIES Metalwork companies need to perform simple bending work. GEKA has designed the BENDICROP MODELS which, apart from including L, B, A, I, cutting stations,

More information

PRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC

PRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC PRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC 2 3 MACHINES WITH GREAT DIMENSIONS AND MACHINING CAPACITY The VTC range has been designed to create new high standards of turning and machining

More information

Mould Precision Co., Ltd

Mould Precision Co., Ltd Program Name: Part Name: Tool Name: Tool Source: Tool Steel: Resin: NL9502 314501 MP1425 Mould Precision Co., Ltd Finished Mould Checklist H13 HRC 48-52 ABS HF380(LG Chem) Program No.: Part No.: Tool No.:

More information

Drawing. Fig. 1 Drawing

Drawing. Fig. 1 Drawing Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet

More information

A DIVISION OF FORENSIC TECHNOLOGY SEE MORE. SOLVE MORE. CLASS-LEADING COMPARISON MICROSCOPES FOR FORENSIC INVESTIGATIONS

A DIVISION OF FORENSIC TECHNOLOGY SEE MORE. SOLVE MORE. CLASS-LEADING COMPARISON MICROSCOPES FOR FORENSIC INVESTIGATIONS A DIVISION OF FORENSIC TECHNOLOGY SEE MORE. SOLVE MORE. CLASS-LEADING COMPARISON MICROSCOPES FOR FORENSIC INVESTIGATIONS PROJECTINA AND FORENSIC TECHNOLOGY Forensic Technology pioneered automated ballistic

More information

Automatic hardness testing devices

Automatic hardness testing devices Automatic hardness testing devices The measure of hardness, applied to rubber and plastic, is a measure of stiffness obtained from an indentation test. An indentor is pressed into the sample under a given

More information

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards

2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards Siemens AG 010 ALPHA 160 - DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quickassembly kits Unequipped

More information

SAMPLE PREPARATION SPECTRAL MMAX. metkon.com

SAMPLE PREPARATION SPECTRAL MMAX. metkon.com SAMPLE PREPARATION SPECTRAL MMAX metkon.com FULLY AUTOMATIC FINE SURFACE MILLING MACHINE SPECTRAL MMAX The SPECTRAL MMax is designed for fully automatic sample preparation of steel and cast iron as well

More information

4. PRESS AND PRESS WORK

4. PRESS AND PRESS WORK 4. PRESS AND PRESS WORK Q. Which are the materials used for press work? GALVANISED IRON Zinc-coated iron is known as "galvanised iron"'. This soft steel sheet is popularly known as Gl sheet. Applications:

More information

GOSSEN METRAWATT. Testers

GOSSEN METRAWATT. Testers Testers 45 Testers Protective measures in electrical systems are intended to prevent bodily injury due to accidents involving electrical current. Of course they also prevent property damage caused by electrical

More information

Design of Jigs, Fixtures, Press Tools and Moulds UNIT - 1 LOCATING AND CLAMPING PRINCIPLES

Design of Jigs, Fixtures, Press Tools and Moulds UNIT - 1 LOCATING AND CLAMPING PRINCIPLES Design of Jigs, Fixtures, Press Tools and Moulds UNIT - 1 LOCATING AND CLAMPING PRINCIPLES 1. Define the term Tool design. Tool design is the process of designing and developing the tools, methods, and

More information

Innovative ideas for your success!

Innovative ideas for your success! Innovative ideas for your success! BONDING & RIVETING. A modern joining process. More and more frequently, adhesive technology is being used in automotive engineering. Thus, more effort is put on gluing

More information

ENGINEERING STANDARDS SECTION: D TOG-L-LOC V-LOC OVAL-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works

ENGINEERING STANDARDS SECTION: D TOG-L-LOC V-LOC OVAL-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works Tog-L-Loc Tog-L-Loc is a circular, leakproof joint formed by drawing the metals into a circular "cup'' and then expanding the diameter to form a 360 radial lock below the bottom sheet. How The Joining

More information

Measuring Technology for Soft Magnetic Materials

Measuring Technology for Soft Magnetic Materials Measuring Technology for Soft Magnetic Materials Benefit from the economic efficiency and short amortisation period of BROCKHAUS measuring and testing instruments for magnetic materials. Inline measuring

More information

Axial Forming. From Expanding...

Axial Forming. From Expanding... Axial Forming.. 1 From Expanding... Axial Forming Hydraulic forming is an axial forming method for tubes and bars. The forming process is executed by means of a die. When forming a tube, a mandrel can

More information

CWP FEEDS FULL-FEATURED FEEDING TECHNOLOGY. cooper-weymouth, peterson

CWP FEEDS FULL-FEATURED FEEDING TECHNOLOGY. cooper-weymouth, peterson CWP FEEDS FULL-FEATURED FEEDING TECHNOLOGY cooper-weymouth, peterson SERVO FEEDS ServoMax SE feeds are designed around the proven performance, accuracy and rugged reliability of ServoMax II feeds. ServoMax

More information

Research on Intelligent CNC Turret Punch Press Process Programming. System

Research on Intelligent CNC Turret Punch Press Process Programming. System 7th International Conference on Applied Science, Engineering and Technology (ICASET 2017) Research on Intelligent CNC Turret Punch Press Process Programming System Cao Ai-xia1,a* Chen Jiang-bo1 1 Qingdao

More information

Product Information. Circumferential Welders

Product Information. Circumferential Welders Product Information Circumferential Welders Microprocessor Control Three Models For all Welding Processes Large Weight Capacities Operator Friendly Various Part Lengths Introduction Jetline offers a unique

More information

SCHMIDT HydroPneumaticPress

SCHMIDT HydroPneumaticPress Maximum orce Range from 15 kn to 220 kn / 3,375 lbs. to 49,460 lbs. The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for optimally transforming, joining and assembling within

More information

HIGH ENERGY RATE FORMING PROCESSES

HIGH ENERGY RATE FORMING PROCESSES HIGH ENERGY RATE FORMING PROCESSES In these forming processes large amount of energy is applied for a very short interval of time. Many metals tend to deform more readily under extra fast application of

More information

Improving Product Quality with Advanced Hot Width Measurement and Automatic Width Control in Hot Strip Mill of Bokaro Steel Plant

Improving Product Quality with Advanced Hot Width Measurement and Automatic Width Control in Hot Strip Mill of Bokaro Steel Plant Improving Product Quality with Advanced Hot Width Measurement and Automatic Width Control in Hot Strip Mill of Bokaro Steel Plant S.Sarkar Instrumentation & Automation, Bokaro Steel Plant, Steel Authority

More information

Technical Documentation

Technical Documentation Technical Documentation PROAM-21 Power amplifier for directional valves Grundlage der Funktionsbeschreibung und zur Prüfung der Module (keine Produktdokumentation). AMCA HYDRAULIC FLUID POWER B.V. P.O.BOX

More information

Operator's manual. TruTool N 1000 (1B1) english

Operator's manual. TruTool N 1000 (1B1) english Operator's manual TruTool N 1000 (1B1) english Table of contents 1. Safety...4 1.1 General safety information...4 1.2 Specific safety information...5 2. Description...6 2.1 Intended use...7 2.2 Technical

More information

4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards

4/2 Introduction. Marshaling Boxes 4/8 8GK1 surface-mounting distribution boards ALPHA 630 - DIN Floor- Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards /5 8GK1 surface-mounting distribution boards, IP3 /6 8GK1 surface-mounting distribution boards, IP55 Marshaling

More information

Tu r n y o u r p r e s s b r a k e o r p u n c h p r e s s i n t o a h o l e p u n c h i n g p r o f i t c e n t e r.

Tu r n y o u r p r e s s b r a k e o r p u n c h p r e s s i n t o a h o l e p u n c h i n g p r o f i t c e n t e r. Tu r n y o u r p r e s s b r a k e o r p u n c h p r e s s i n t o a h o l e p u n c h i n g p r o f i t c e n t e r. U n i P u n c h M o d u l a r To o l i n g Works with existing presses Multiple holes

More information

Operator's manual. TruTool N 200 (1A1) english

Operator's manual. TruTool N 200 (1A1) english Operator's manual TruTool N 200 (1A1) english Table of contents 1. Safety...3 2. Description...5 2.1 Correct use...6 2.2 Technical data...7 3. Tool assembly...8 3.1 Changing the stroke rate...8 4. Operation...10

More information

Press Operations & Types of Dies

Press Operations & Types of Dies Press Operations & Types of Dies Press Working Use of mechanical and hydraulic presses for forging and extrusion has been mentioned earlier. Knuckle type mechanical presses are used widely for sheet metal

More information

Workholding Systems Double clamping system DF

Workholding Systems Double clamping system DF Workholding Systems Double clamping system DF 05/2014 3.3420 Flexible double clamping system DF, mechanical-hydraulic and hydraulic Your benefits at a glance: Double machining Series arrangement Individual

More information

Operator's manual TruTool PN 130 (1A1)

Operator's manual TruTool PN 130 (1A1) Operator's manual TruTool PN 130 (1A1) english TruTool PN 130 (1A1) Table of Contents Table of Contents 1. Safety...4 1.1 1.2 General safety information...4 Specific safety information...5 2. Description...6

More information