GSM TELEPHONE GT-P3100 GSM TELEPHONE CONTENTS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "GSM TELEPHONE GT-P3100 GSM TELEPHONE CONTENTS"

Transcription

1 SM TELEPHONE T-P300 SM TELEPHONE CONTENTS. Safety Precautions. Specification 3. Product Function. Exploded View and Parts list 5. MAIN Electrical Parts List 6. Level Repair 7. Level Repair 8. Level 3 Repair 9. Reference data tice: All functionality, features, specifications, and other product information provided in this document, including but not limited to, benefits, design, pricing, components, performance, availability, and capabiliti -es of the product are subject to change without notice. Samsung reserves the right to alter this doc -ument or the product described herein at anytime, without obligation to provide notification of such changes.

2 This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law. c Samsung Electronics Co.,Ltd Rev..0

3 . Specification -. SM eneral Specification SM850 ESM 900 DCS800 PCS900 WCDMA 00 WCDMA 900 WCDMA 900 WCDMA 850 Freq. Band[MHz] Uplink/ Downlink 8~89 869~89 880~95 95~960 70~ ~ ~90 930~990 9~977 ~67 85~907 93~ ~95 95~960 8~89 869~89 ARFCN range 8~5 0~ & 975~03 5~885 5~80 UL: 96~9888 DL: 056~08 38 UL: 96~9538 DL: 966~9938 UL: 7~863 DL: 937~3088 UL: 3~33 DL: 357~58 Tx/Rx spacing 5MHz 5MHz 95MHz 80MHz 90MHz 80MHz 5MHz 5MHz Mod. Bit rate/ Bit Period kbp s 3.69us kbp s 3.69us kbp s 3.69us kbp s 3.69us 3.8Mcps 3.8Mcps 3.8Mcps 3.8Mcps Time Slot Period/ Frame Period 576.9us.65ms 576.9us.65ms 576.9us.65ms 576.9us.65ms FrameLengt h: 0ms Slotlength: 0.667ms FrameLengt h: 0ms Slotlength: 0.667ms FrameLengt h: 0ms Slotlength: 0.667ms FrameLengt h: 0ms Slotlength: 0.667ms Modulation 0.3MSK 0.3MSK 0.3MSK 0.3MSK QPSKHQPS K QPSKHQPS K QPSKHQPS K QPSKHQPS K MS Power 33dBm~5dB m 33dBm~5dB m 30dBm~0dB m 30dBm~0dB m dbm~ -50dBm dbm~ -50dBm dbm~ -50dBm dbm~ -50dBm Power Class 5pcl ~ 9pcl 5pcl ~9pcl 0pcl ~ 5pcl 0pcl ~ 5pcl 3(max+dB m) 3(max+dB m) 3(max+dB m) 3(max+dB m) Sensitivity -0dBm -0dBm -00dBm -00dBm -06.7dBm -06.7dBm -06.7dBm -06.7dBm TDMA Mux Cell Radius 35Km 35Km Km Km Km Km Km Km -

4 Specification -. SM Tx Power Class TX Power control level SM850 TX Power control level ESM900 TX Power control level DCS800 TX Power control level PCS ± dbm 5 33± dbm 0 30±3 dbm 0 30±3 dbm 6 3± dbm 6 3± dbm 8±3 dbm 8±3 dbm 7 9± dbm 7 9± dbm 6±3 dbm 6±3 dbm 8 7± dbm 8 7± dbm 3 ±3 dbm 3 ±3 dbm 9 5± dbm 9 5± dbm ±3 dbm ±3 dbm 0 3± dbm 0 3± dbm 5 0±3 dbm 5 0±3 dbm ± dbm ± dbm 6 8±3 dbm 6 8±3 dbm 9± dbm 9± dbm 7 6±3 dbm 7 6±3 dbm 3 7± dbm 3 7± dbm 8 ±3 dbm 8 ±3 dbm 5± dbm 5± dbm 9 ± dbm 9 ± dbm 5 3± dbm 5 3± dbm 0 0± dbm 0 0± dbm 6 ±3 dbm 6 ±3 dbm 8± dbm 8± dbm 7 9±3dBm 7 9±3dBm 6± dbm 6± dbm 8 7±3 dbm 8 7±3 dbm 3 ± dbm 3 ± dbm 9 5±3 dbm 9 5±3 dbm ±5 dbm ±5 dbm 5 0±5 dbm 5 0±5 dbm -

5 3. Operation Instruction and Installation Main Function AndroidOS:IceCreamSandwich(ICS) HSPA+ Mbps / HSUPA 5.7Mbps Main 3M FF, VA 7.0" WSA 6M TFT LCD (PLS_type) PS / BT v3.0 USB v.0 / WiFi (80. b/g/n) / OT Recording definition: 70p / Playback at 080p resolution Sensors: Accelerometer, Electromagnetic, Light Additional : - Hz Dual Core CPU - Application store / Precise Motion UI - Seamless Sharing Experience. 3-

6 6. Level Repair 6-. S/W Download 6--. Pre-requisite for S/W Downloading Downloader Program (Odin3 v.83.exe) T-P300 Mobile Phone Data Link Cable (H39-00H) Binary files Settings Data Link Cable 6- SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

7 Level Repair 6--. S/W Downloader Program Load the binary download program by executing the "Odin3 v.83.exe" Run this file.. Option Selection - Check Auto Reboot and F. Reset Time, then select PIT File 6- SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

8 Level Repair. Enter Device into Download Mode - Press down on Volume Down button and power key at same time for 0 seconds - Press down on Volume Up button to enter device into download mode 6-3 SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

9 Level Repair 3. Connect the Device to PC via Data Cable. Make sure ID:COM box highlighted yellow that the device is connected to the PC.. Enable the check mark by click on the following options, - Check BOOTLOADER, PDA and CSC Files 6- SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

10 Level Repair 5. Start downloading binary file into the device by clicking Start Button on the screen. the green colored "PASS!" sign will appear on the upper-left box if the binary file has been successfully downloaded into the device. 6. Disconnect the device from the Data cable. 7. Once the device boots up, confirm the downloaded version name and etc. : *#3# Full Reset : *767*3855# 6-5 SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

11 9. Reference Abbreviate Reference Abbreviate AAC: AdvancedAudioCoding. AVC: AdvancedVideoCoding. BER: BitErrorRate BPSK: BinaryPhaseShiftKeying CA: ConditionalAccess CDM: CodeDivisionMultiplexing C/I: CarriertoInterference DMB: DigitalMultimediaBroadcasting 두 : EuropeanStandard ES: ElementaryStream ETSI: EuropeanTelecommunicationsStandardsInstitute MPE: MovingPictureExpertsroup PN: Pseudo-randomise PS: PilotSymbol QPSK: QuadraturePhaseShiftKeying RS: Reed-Solomon SI: ServiceInformation TDM: TimeDivisionMultiplexing TS: TransportStream 9-

12 . Safety Precautions -. Repair Precaution Before attempting any repair or detailed tuning, shield the device from RF noise or static electricity discharges. Use only demagnetized tools that are specifically designed for small electronic repairs, as most electronic parts are sensitive to electromagnetic forces. Use only high quality screwdrivers when servicing products. Low quality screwdrivers can easily damage the heads of screws. Use only conductor wire of the properly gauge and insulation for low resistance, because of the low margin of error of most testing equipment. We recommend -gauge twisted copper wire. Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily damaged, even with relatively low heat. Never use a soldering iron with a power rating of more than 00 watts and use only lead-free solder with a melting point below 50 C (8 F). Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected. Always use the replacement parts that are registered in the SEC system. Third-party replac ement parts may not function properly. -

13 Safety Precautions -. ESD(Electrostatically Sensitive Devices) Precaution Many semiconductors and ESDs in electronic devices are particularly sensitive to static discha rge and can be easily damaged by it. We recommend protecting these components with cond uctive anti-static bags when you store or transport them. Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate static electricity from your body before repairing ESDs. Ensure that soldering irons have AC adapter with ground wires and that the ground wires are properly connected. Use only desoldering tools with plastic tips to prevent static discharge. Properly shield the work environment from accidental electrostatic discharge before opening packages containing ESDs. The potential for static electricity discharge may be increased in low humidity environments, such as air-conditioned rooms. Increase the airflow to the working area to decrease the chance of accidental static electricity discharges. -

14 . Exploded View and Parts List -. Cellular phone Exploded View QFR0 QVK0 QCA0 QME6 QJK0 QAR0 QAN0 QCA0 QAN03 QCR7 QMP0 QBA0 QCR03 QSP0 QSP0 QCK0 QRE0 QRF06 QSD0 -

15 5. MAIN Electrical Parts List SEC CODE Design LOC Description D50,ZD50,ZD70 DIODE-ZENER D300,D500,D50,D50 DIODE-TVS D503 DIODE-TVS ZD00,ZD500,ZD700 DIODE-TVS ZD08,ZD50,ZD503,ZD50 DIODE-TVS ZD505,ZD506,ZD800 DIODE-TVS ZD900,ZD90 DIODE-TVS ZD300,ZD30 DIODE-TVS ZD0,ZD03,ZD0 DIODE-TVS ZD05 DIODE-TVS D700 DIODE-ARRAY TR700,TR70,TR703 TR-DIITAL TR500 TR-DIITAL Q800 FET-SILICON TR70 FET-SILICON TR70,TR705 FET-SILICON U703 FET-SILICON U609 IC-ANALO SWITCH U606,U608 IC-ANALO SWITCH U300 IC-ANALO SWITCH U08 IC-ANALO SWITCH UCP600 IC-MICROPROCESSOR U900 IC-TOUCH IC U05 IC-ANALO SWITCH U50,U505 IC-USB SWITCH IC U0 IC-BAND SWITCH U503 IC-LEVEL DRIVER U60,U60,U603 IC-LEVEL DRIVER UME300 IC-DDR SDRAM U607 IC-FLASH U00 IC-PS LNA U03 IC-PAM 0-00 U500 IC-ANALO SWITCH U0 IC-COMPARATOR U803 IC-DC/DC CONVERTER 5-

16 Main Electrical Parts List SEC CODE Design LOC Description U605 IC-DC/DC CONVERTER U0,U03,U700,U705 IC-DC/DC CONVERTER U90 IC-DC/DC CONVERTER U08 IC-DC/DC CONVERTER U707 IC-DC/DC CONVERTER U0 IC-DC/DC CONVERTER U09 IC-DC/DC CONVERTER U93 IC-POWER SUPERVISOR U70 IC-RESET IC U70 IC-FUELAUE U706 IC-POWER SUPERVISOR U50 IC-SWITCH U50 IC-POWER SUPERVISOR U0 IC-DC/DC TRANSCIEVER U90 IC-DC/DC CONVERTER U06 IC-PAM U800 IC-DC/DC CONVERTER U60 IC-DC/DC CONVERTER U70 IC-POWER SUPERVISOR U00 IC-ADC IC U805 IC-DC/DC CONVERTER U80 IC-TRANSMITTER U0 IC-PS U03 IC-Wifi U06 IC-CODEC UCP300 IC-MODEM U00 IC-AMP U05,U07 IC-SWITCH REULATOR U903 IC-SENSOR U90 IC-SENSOR TH300,TH700 THERMISTOR VAR00,VAR0,VAR0 VARISTOR VAR03 VARISTOR VAR700 VARISTOR R,R,R68,R69 R-CHIP R53,R533 R-CHIP 5-

17 Main Electrical Parts List SEC CODE Design LOC Description R9,R635,R636,R670 R-CHIP R67 R-CHIP R30,R70,R79,R90 R-CHIP R9,R93 R-CHIP R630 R-CHIP R09,R8,R3,R608 R-CHIP R60,R6,R63,R67 R-CHIP R69,R693,R77,R76 R-CHIP R78 R-CHIP R7 R-CHIP R09,R0,R,R R-CHIP R3,R308,R500,R503 R-CHIP R50,R505,R506,R507 R-CHIP R0,R5,R53,R657 R-CHIP R658,R66,R690,R70 R-CHIP R708,R7,R7,R77 R-CHIP R80 R-CHIP R5,R53 R-CHIP R56,R57 R-CHIP R0 R-CHIP R50 R-CHIP R508 R-CHIP R0,R55 R-CHIP R85 R-CHIP R68,R900 R-CHIP R0,R3 R-CHIP R50 R-CHIP R30 R-CHIP R689,R69,R695 R-CHIP R80,R80,R803,R80 R-CHIP R805,R806,R807,R808 R-CHIP R809 R-CHIP R0,R50,R5 R-CHIP R73 R-CHIP R05 R-CHIP R,R9 R-CHIP 5-3

18 Main Electrical Parts List SEC CODE Design LOC Description R59,R530 R-CHIP R673,R67,R675,R676 R-CHIP R677,R678,R679,R680 R-CHIP R68 R-CHIP R53 R-CHIP R55 R-CHIP R306,R307 R-CHIP R8 R-CHIP R08 R-CHIP R0,R3,R,R5 R-CHIP R6 R-CHIP R56,R57,R58 R-CHIP R,R3 R-CHIP R909,R9 R-CHIP R,R83 R-CHIP R09,R,R,R7 R-CHIP R8 R-CHIP R687,R688 R-CHIP R509 R-CHIP R66 R-CHIP R07 R-CHIP R05 R-CHIP R03 R-CHIP R309,R66,R67,R638 R-CHIP R639,R735 R-CHIP R06 R-CHIP R30,R709,R90 R-CHIP R58,R59,R903,R99 R-CHIP R5 R-CHIP R656 R-CHIP R50 R-CHIP R5,R53,R7 R-CHIP R06 R-CHIP R36,R63,R6,R83 R-CHIP R87,R90 R-CHIP R07 R-CHIP 5-

19 Main Electrical Parts List SEC CODE Design LOC Description R300,R30,R30,R00 R-CHIP R65,R637,R669,R685 R-CHIP R686 R-CHIP R3,R63,R908 R-CHIP R668 R-CHIP R33,R667 R-CHIP R70 R-CHIP R733,R73 R-CHIP R600,R67 R-CHIP R03,R0 R-CHIP R73 R-CHIP R736 R-CHIP C3,C06,C35,C36 C-CERAMIC,CHIP C00,C77,C80 C-CERAMIC,CHIP C3,C3,C3,C39 C-CERAMIC,CHIP C0,C,C,C C-CERAMIC,CHIP C7,C85 C-CERAMIC,CHIP C33,C3,C36,C37 C-CERAMIC,CHIP C39,C3,C C-CERAMIC,CHIP C33 C-CERAMIC,CHIP C8,C695 C-CERAMIC,CHIP C0 C-CERAMIC,CHIP C3,C3 C-CERAMIC,CHIP C30,C3,C35,C38 C-CERAMIC,CHIP C0,C,C,C9 C-CERAMIC,CHIP C95 C-CERAMIC,CHIP C38 C-CERAMIC,CHIP C8 C-CERAMIC,CHIP C76 C-CERAMIC,CHIP C C-CERAMIC,CHIP C8 C-CERAMIC,CHIP C8 C-CERAMIC,CHIP C,C7,C,C5 C-CERAMIC,CHIP C5 C-CERAMIC,CHIP C,C337,C3 C-CERAMIC,CHIP C75,C76,C9 C-CERAMIC,CHIP 5-5

20 Main Electrical Parts List SEC CODE Design LOC Description C,C9 C-CERAMIC,CHIP C3 C-CERAMIC,CHIP C6,C00,C50 C-CERAMIC,CHIP C C-CERAMIC,CHIP C33,C03 C-CERAMIC,CHIP C0,C0,C,C3 C-CERAMIC,CHIP C3,C507,C508,C607 C-CERAMIC,CHIP C6,C65,C65,C668, C-CERAMIC,CHIP C68,C685,C78,C93 C-CERAMIC,CHIP C0 C-CERAMIC,CHIP C655,C69,C693,C69 C-CERAMIC,CHIP C73 C-CERAMIC,CHIP C35,C56,C6,C30 C-CERAMIC,CHIP C303 C-CERAMIC,CHIP C53 C-CERAMIC,CHIP C9 C-CERAMIC,CHIP C,C,C6,C69 C-CERAMIC,CHIP C60,C666,C675,C689 C-CERAMIC,CHIP C7 C-CERAMIC,CHIP C0,C05,C06,C07 C-CERAMIC,CHIP C08,C,C3,C C-CERAMIC,CHIP C38,C,C3,C8 C-CERAMIC,CHIP C9,C57,C0,C30 C-CERAMIC,CHIP C30,C305,C306,C307 C-CERAMIC,CHIP C308,C309,C35,C36 C-CERAMIC,CHIP C37,C39,C30,C3 C-CERAMIC,CHIP C33,C35,C36,C37 C-CERAMIC,CHIP C38,C39,C330,C33 C-CERAMIC,CHIP C33,C33,C35,C0 C-CERAMIC,CHIP C07,C60,C60,C603 C-CERAMIC,CHIP C60,C606,C608,C609 C-CERAMIC,CHIP C6,C63,C6,C6 C-CERAMIC,CHIP C6,C65,C66,C67 C-CERAMIC,CHIP C630,C63,C63,C63 C-CERAMIC,CHIP C635,C636,C637,C638 C-CERAMIC,CHIP C60,C6,C6,C69 C-CERAMIC,CHIP 5-6

21 Main Electrical Parts List SEC CODE Design LOC Description C65,C653,C66,C66 C-CERAMIC,CHIP C663,C66,C667,C669 C-CERAMIC,CHIP C670,C67,C678,C68 C-CERAMIC,CHIP C909,C90,C95 C-CERAMIC,CHIP C7,C6,C66,C78 C-CERAMIC,CHIP C79,C80,C8,C8 C-CERAMIC,CHIP C6,C30,C00,C0 C-CERAMIC,CHIP C3,C,C5,C63 C-CERAMIC,CHIP C6,C505,C506,C50 C-CERAMIC,CHIP C600,C688,C73,C73 C-CERAMIC,CHIP C79,C803,C80,C805 C-CERAMIC,CHIP C900,C90,C90,C903 C-CERAMIC,CHIP C905,C907,C99,C90 C-CERAMIC,CHIP C09,C0,C,C5 C-CERAMIC,CHIP C36 C-CERAMIC,CHIP C753,C83 C-CERAMIC,CHIP C67,C7,C75,C79 C-CERAMIC,CHIP C73 C-CERAMIC,CHIP C50,C5,C679,C683 C-CERAMIC,CHIP C7,C9 C-CERAMIC,CHIP C70 C-CERAMIC,CHIP C63 C-CERAMIC,CHIP C,C7,C0,C0 C-CERAMIC,CHIP C,C3,C03,C5 C-CERAMIC,CHIP C7,C8,C690,C703 C-CERAMIC,CHIP C70,C708,C709,C73 C-CERAMIC,CHIP C75 C-CERAMIC,CHIP C0,C03,C07,C75 C-CERAMIC,CHIP C5,C733 C-CERAMIC,CHIP C8 C-CERAMIC,CHIP C7,C300,C3,C3 C-CERAMIC,CHIP C38,C3,C333,C33 C-CERAMIC,CHIP C3,C68,C69,C633 C-CERAMIC,CHIP C656,C657,C658,C659 C-CERAMIC,CHIP C660,C665,C673,C67 C-CERAMIC,CHIP C686,C73 C-CERAMIC,CHIP 5-7

22 Main Electrical Parts List SEC CODE Design LOC Description C7 C-CERAMIC,CHIP C60,C63,C7,C7 C-CERAMIC,CHIP C87 C-CERAMIC,CHIP C39,C05,C30,C70 C-CERAMIC,CHIP C705,C707,C70,C756 C-CERAMIC,CHIP C800,C85,C86,C906 C-CERAMIC,CHIP C908,C9,C93,C99 C-CERAMIC,CHIP C930,C93,C933,C93 C-CERAMIC,CHIP C936 C-CERAMIC,CHIP C30,C3,C33,C75 C-CERAMIC,CHIP C76,C735,C736,C737 C-CERAMIC,CHIP C738,C739,C70 C-CERAMIC,CHIP C65,C73,C8,C9 C-CERAMIC,CHIP C9,C50 C-CERAMIC,CHIP C706,C8 C-CERAMIC,CHIP C605,C60,C6,C650 C-CERAMIC,CHIP C77 C-CERAMIC,CHIP C,C5,C58,C7 C-CERAMIC,CHIP C7,C67,C68,C639 C-CERAMIC,CHIP C67,C68,C687,C700 C-CERAMIC,CHIP C78,C79,C70,C7 C-CERAMIC,CHIP C7,C75 C-CERAMIC,CHIP C70,C3,C63,C6 C-CERAMIC,CHIP C67,C676,C696,C697 C-CERAMIC,CHIP C730,C9,C96,C97 C-CERAMIC,CHIP C98,C96,C97,C98 C-CERAMIC,CHIP C935 C-CERAMIC,CHIP C6,C5 C-CERAMIC,CHIP C509 C-CERAMIC,CHIP C77,C78 C-CERAMIC,CHIP C5 C-CERAMIC,CHIP C0,C05,C06,C0 C-CERAMIC,CHIP C9,C69,C7,C7 C-CERAMIC,CHIP C755 C-CERAMIC,CHIP C335,C336,C500,C50 C-CERAMIC,CHIP C50,C503 C-CERAMIC,CHIP 5-8

23 Main Electrical Parts List SEC CODE Design LOC Description C65,C66,C65,C66 C-CERAMIC,CHIP C08,C09,C7,C8 C-CERAMIC,CHIP C0,C,C,C3 C-CERAMIC,CHIP C,C6 C-CERAMIC,CHIP C80 C-CERAMIC,CHIP TA00,TA0,TA0 C-TA,CHIP L INDUCTOR-SMD L3 INDUCTOR-SMD L06 INDUCTOR-SMD L00,L INDUCTOR-SMD L7,L30 INDUCTOR-SMD L INDUCTOR-SMD L3 INDUCTOR-SMD L,L6 INDUCTOR-SMD L0 INDUCTOR-SMD L600 INDUCTOR-SMD L INDUCTOR-SMD L500 INDUCTOR-SMD L90 INDUCTOR-SMD L6,L8,L9 INDUCTOR-SMD L30,L303 INDUCTOR-SMD L700,L70,L70,L703 INDUCTOR-SMD L70 INDUCTOR-SMD L5,L9 INDUCTOR-SMD L0 INDUCTOR-SMD L08 INDUCTOR-SMD L07 INDUCTOR-SMD L0,L0,L8 INDUCTOR-SMD L INDUCTOR-SMD L07 INDUCTOR-SMD L5 INDUCTOR-SMD L705 INDUCTOR-SMD OSC300,OSC700 CRYSTAL-UNIT OSC0 CRYSTAL-UNIT OSC600 OSCILLATOR-CLOCK OSC00 OSCILLATOR-CLOCK 5-9

24 Main Electrical Parts List SEC CODE Design LOC Description OSC00 OSCILLATOR-CLOCK OSC00 OSCILLATOR-VCTCXO F800,F80,F80,F900 FILTER-EMI F90 FILTER-EMI F00 FILTER-SAW F0 FILTER-DUPLEXER F00 FILTER U0 FILTER U0 FILTER L0 CORE-FERRITE L0,L03,L0,L05 CORE-FERRITE L06,L07,L08,L09 CORE-FERRITE L0 CORE-FERRITE L00,L05,L06 CORE-FERRITE L900 CORE-FERRITE L00,L0 CORE-FERRITE L300,L30,L80 CORE-FERRITE L90 CORE-FERRITE L03,L0 CORE-FERRITE CN00 RF SWITCH CD500 CONNECTOR-CARD SIM300 CONNECTOR-CARD IFC500 CONNECTOR-SOCKET HDC90 CONNECTOR-HEADER HDC00,HDC0,HDC800 CONNECTOR-HEADER HDC90,HEA00 CONNECTOR-HEADER HDC900,HDC903 CONNECTOR-HEADER HDC80 CONNECTOR-HEADER HDC600 CONNECTOR-HEADER CON700 CONNECTOR-HEADER ANT00,ANT0,ANT0 CONNECTOR ANT03 CONNECTOR ANT00,ANT0 CONNECTOR H6-0009A CON00,CON0,CON0 SMR-TS H6-0009A CON03,CON0,CON05 SMR-TS H6-0009A CON06 SMR-TS

25 Main Electrical Parts List SEC CODE Design LOC Description H70-077A SC00 SHIELDCAN-P-PS- H A R0,R69 SHIELDCAN-P-PS- H80-033A R9,R93 SHIELDCAN-P-PS- H98-86A SC0 SHIELDCAN-P-WIFI 5-

26 7. Level Repair 7-. Disassembly and assembly Instructions 7--. Disassembly Disassemble the rear cover with the front cover by using the hook Put the disassemble jig as shown in the picture below. And disassemble hooks in regular sequence. : Hook ( Point) 3 Be careful not to scratch cover. Be careful not to scratch cover. Follow the numbered sequence when you disjoint Follow the numbered sequence when you disjoint Disassemble the rest of the hooks. Put your hand has opened between the front assy and the rear cover. First, disassemble the hooks in the direction of IF connector. And then disassemble all the remain hooks. Be careful not to scratch cover. Be careful not to scratch cover. Follow the numbered sequence when you disjoint Follow the numbered sequence when you disjoint 7- SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

27 7. Level Repair 5 Carefully release the screws at 6 different locations from the Front. (L.*3.0, Torque 0.9 ~.0 kgf.cm) 6 Separate the Speaker, Battery from the PBA. Be careful not to scratch cover Be careful not to damage the FPCBs Be careful not to damage the wires 7 Separate IF Connector, TSP, LCD, 3M Camera, VA Camera, Volume Key, 8 Separate PBA from the Front. Earjack FPCBs from the PBA Be careful not to damage the FPCBs Be careful not to scratch cover 7- SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

28 7. Level Repair 9 Separate the Intenna, 3M Camera, Earjack, Volume FPCB, VA Camera, Sensor FPCB from the Front. Be careful not to damage the FPCBs 7-3 SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

29 7. Level Repair 7--. assemble Assemble the 3M Camera, Earjack, Volume Assemble the Intenna FPCB, VA Camera, Sensor FPCB Be careful not to damage the FPCBs Be careful not to damage the FPCBs 3 Assemble PBA and all Connectors Assemble the Speakers Battery Be careful not to damage the FPCBs Be careful not to damage the FPCBs 7- SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

30 7. Level Repair 5 Screw at 6 point (L.*3.0, Torque 0.9 ~.0 kgf.cm) 6 Assemble the Rear. Be careful not to damage the FPCBs Be careful not to damage the FPCBs, not to scratch cover. 7-5 SAMSUN Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization

31 8. Level 3 Repair 8-. Block Diagram 8-

32 Level 3 Repair PCB Diagrams 8--. Top ANT0 ANT03 ANT0 BOTH00 BOTH0 BOTH0 BOTH03 BOTH0 BOTH05 BOTH06 BOTH07 BOTH08 BOTHHOLE00 C0 C03 C0 C05 C06 C07 C08 C09 C0 C C C6 C7 C C C3 C C5 C6 C7 C8 C9 C30 C3 C3 C33 C3 C35 C36 C37 C38 C39 C0 C C C3 C C5 C6 C7 C8 C9 C50 C5 3 C5 C5 C5 C55 C56 C57 C58 C59 C60 C6 C63 C65 C66 C67 C70 C7 C7 C73 C7 C75 C76 C77 C78 C79 C80 C8 C8 C0 C0 C05 C07 C C C5 C6 C7 C8 C9 C0 C C C3 C C5 C6 C7 C8 C9 C30 C3 C3 C33 C3 C35 C36 C37 C38 C39 C0 C C C3 C C5 C6 C7 C8 C300 C30 C30 C303 C30 C305 C306 C307 C308 C309 C30 C3 C3 C33 C3 C35 C36 C37 C38 C39 C30 C3 C3 C33 C3 C35 C36 C37 C38 C39 C330 C33 C33 C333 C33 C33 5 C336 C337 C3 C33 C3 C35 C00 C0 C0 C03 C0 C05 C06 C07 C08 C09 C0 C C C3 C C5 C6 C7 C8 C9 C0 C C C3 C C5 C6 C7 C8 C9 C30 C3 C3 C33 C3 C35 C36 C37 C38 C39 C0 C C C3 C C63 C6 C507 C508 C5 C600 C60 C60 C603 C60 C605 C606 C607 C608 C609 C60 C6 C6 C63 C6 C65 C66 C67 C68 C69 C60 C6 C6 C63 C6 C65 C66 C67 C68 C69 C630 C63 C63 C633 C63 C635 C636 C637 C638 C639 C60 C6 C6 C63 C6 C65 C66 C67 C68 C69 C650 C65 C65 C653 C65 C655 C656 C657 C658 C659 C660 C66 C66 C663 C66 C665 C666 C667 C668 C669 C670 C67 C67 C673 C67 C675 C676 C677 C678 C679 C68 C683 C68 C685 C686 C687 C688 C689 C690 C69 C69 C693 C69 C695 C696 C697 C700 C70 C70 C703 C70 C705 C706 C707 C708 C70 9 C70 C7 C7 C73 C7 C75 C76 C78 C79 C70 C7 C7 C73 C7 C730 C73 C735 C736 C737 C738 C73 C7 C76 C77 C78 C79 C753 C75 C755 C756 C800 C80 C80 C803 C80 C805 C85 C86 C85 C900 C90 C90 C903 C90 C909 C90 C9 C9 C93 C9 C95 C96 C97 C98 C99 C90 C9 C9 C95 C99 C930 C93 C93 C933 C93 C935 C936 C939 CMC800 CN00 CON700 D700 F00 F0 F800 F80 F80 F900 PS_EN PS_nRST HDC00 HDC0 HDC600 HDC800 HDC80 HDC900 HDC90 HDC90 HDC903 HEA00 L0 L0 L03 L0 L05 L07 L08 L0 L3 L L L5 L6 L7 L8 L9 L0 L L L3 L L5 L6 L7 L8 L9 L30 L0 L03 L0 L05 L06 L07 L08 L09 L L L L300 L30 L30 L303 L00 L0 L0 L03 L0 L05 L06 L07 L08 L09 L0 L600 L700 L70 L70 L703 L70 L90 L90 OSC00 OSC0 OSC300 OSC600 OSC700 PREQ700 PREQ70 R00 R03 R0 R05 R06 R07 R08 R R6 R7 R8 R9 R0 R R R3 R0 R03 R05 R06 R07 R08 R09 R0 R R R3 R300 R30 R30 R303 R30 R305 R306 R307 R309 R33 R3 R35 R36 R37 R38 R39 R30 R00 R03 R0 R05 R06 R07 R09 R0 R R R3 R R5 R6 R7 R8 R9 R0 R R3 R R7 R30 R3 R3 R50 R508 R5 R53 R5 R55 R56 R57 R50 R5 R5 R53 R600 R60 R60 R603 R60 R605 R606 R607 R608 R609 R60 R6 R6 R63 R6 R65 R66 R67 R68 R69 R63 R6 R65 R66 R67 R68 R69 R630 R63 R635 R636 R638 R639 R63 R6 R65 R66 R67 R68 R69 R650 R65 R65 R653 R65 R655 R656 R657 R658 R66 R66 R667 R668 R669 R67 R673 R67 R675 R676 R677 R678 R679 R680 R68 R68 R683 R68 R685 R686 R687 R688 R689 R690 R69 R69 R693 R69 R695 R700 R70 R703 R70 R705 R706 R707 R708 R709 R7 R7 R7 R75 R76 R77 R78 R79 R7 R73 R7 R75 R76 R77 R78 R79 R730 R73 R735 R736 R800 R80 R8 R8 R83 R8 R85 R86 R87 R88 R83 R8 R85 R900 R90 R903 R90 R906 R907 R908 R909 R9 R9 R93 R90 R9 R9 R93 SC00 SC0 TA00 TA0 TA0 TH300 TH700 TP_A300 TP_BT_PCM_CLK TP_BT_PCM_DIN TP_BT_PCM_DOUT TP_BT_PCM_SY TP_CALL_MCLK TP_CP_ON TP_D300 TP_PS_CLK_EN TP_IF TP_PCM_CLK TP_PCM_IN TP_PCM_OUT TP_PCM_SY TP_PDA_ACTIVE TP_PHONE_ACTIVE TP_RESET_ALL TP_RESET_N_RF TP_RESET_REQ_N TP_SD_BA300 TP_SD_BA30 TP_U_CTS TP_U_RTS TP_U_RXD TP_U_TXD TP_WLAN_EN TP_WLAN_HOST_WAKE TP_W LAN_SD_CLK TP00 TP0 TP00 TP0 TP0 TP03 TP0 TP05 TP300 TP30 TP30 TP303 TP30 TP305 TP306 TP307 TP308 TP309 TP30 TP3 TP3 TP33 TP3 TP35 TP36 TP38 TP36 TP37 TP00 TP0 TP0 TP03 TP600 TP60 TP60 TP603 TP605 TP60 TP700 TP70 TP70 TP703 TP70 TP706 TP80 TP80 TP803 TP80 TP805 TP806 TP900 TP90 TP90 TR500 TR700 TR70 TR703 U00 U0 U0 U03 U0 U06 U07 U08 U09 U0 U0 U03 U300 U00 U0 U0 U03 U0 U06 U08 U500 U503 U60 U60 U603 U60 U605 U606 U607 U608 U609 U700 U70 U70 U70 U705 U800 U80 U803 U900 U90 U903 U90 U93 UCP300 UCP600 UME300 VAR00 VAR0 VAR0 VAR03 VAR700 ZD00 ZD00 ZD0 ZD0 ZD03 ZD0 ZD05 ZD06 ZD07 ZD08 ZD50 ZD700 ZD70 ZD800 ZD900 ZD90

33 ANT0 L00 C50 PS_00 F00 ANT00 C00 R00 C09 C06 C0 F90 C97 C98 C96 R637 C938 C937 R99 TP0 R R6 R55 C509 C50 C3 C R533 ZD503 U707 R53 R53 R58 R805 R73 C75 R80 R806 R733 R803 R57 C75 R807 C750 R80 R56 C77 R808 R80 C5 R809 C7 D50 C78 C77 C53 C7 C75 C79 R530 R59 C76 C739 R7 C73 R67 R670 C733 R70 R73 C73 C83 U805 R0 TP39 TP37 C87 L80 TP33 TP3 R0 C8 TP_BT_EN TP_BT_nRST R53 C500 L500 C506 R59 R3 C505 R58 R09 C50 R5 R0 U50 R500 C6 R5 R3 C00 C503 R308 C R507 U05 L00 L06 C339 R0 C8 ANT0 R50 C0 C3 C50 L900 C906 C907 R0 C0 C9 R506 R30 R50 R50 C50 L R3 R5 C905 C6 R3 R509 U90 C908 R503 C68 ANT00 C69 R C3 0 C3 R90 R R505 L3 C5 CN300 C338 Level 3 Repair 8--. Bottom IFC500 ZD505 ZD506 ZD50 D503 ZD50 D50 CON06 U703 TR705 TR70 TR70 U50 C70 L705 U706 CON03 CON0 U505 U50 CON0 TP3 0 TP3 TP3 TP35 CON05 CD500 ZD500 D50 D500 D300 OSC00 SIM300 ZD300 ZD30 C03 C0 U00 CON00 U05 OSC00 Q800 CON0 8-3

34 Level 3 Repair 8-3. Flow Chart of Troubleshooting Equipments Oscilloscope Digital Multimeter Power Supply + driver, ESD Safe Tweezer 8960 & Spectrum Analyzer Soldering iron 8-

35 Level 3 Repair Power On Cell-phone can`t power on. Check the Battery Voltage. Is it more than 3.V? Charging the battery by TA. Check the key-fpcb (open, etc) Abnormal Change the key-fpcb And retry to the power-on operation. Power-on the phone and check the power-on sound. Sound is ok? Change the FRONT ASSY Check the U70 output voltage (C737 >.8V, C738 >.V, C73 >.V, C735 >.3V C736 >.V) Check the Clock OSC700(C75) Is that frequency 3KHz? If the output voltage is not satisfied with normal condition, Change the U70. Each voltage level has ±0% margin. Change the OSC700 If OSC700 does not still work, Change the U70 This problem is internal oscillator of U70. Test condition (Oscilloscope setting) :0.0us.div (time division) Check the U70 output signal (nrespwron(r70) >.8V) If the output voltage is not satisfied with normal. condition, Change the U70. Each voltage level has ±0% margin. check the initial operation END 8-5

36 Level 3 Repair 8-6 BOTH 0 C607 C655 C668 C673 C67 C68 C685 C700 C70 C70 C703 C70 C705 C706 C707 C708 C70 C709 C7 C7 C73 C7 C75 C76 C78 C79 C70 C7 C7 C730 C73 C735 C736 C737 C738 C75 C755 C756 C805 C9 C93 C99 C930 C93 C93 C933 C C936 0 L700 L70 L70 L703 L70 L90 OSC700 PREQ700PREQ70 69 R6 R68 R69 R68 R683 R689 R690 R69 R69 R695 R70 R703 R70 R706 R707 R708 R709 R7 R75 R77 R78 R79 R7 R7 R75 R76 3 R86 R R90 93 R R9 R9 0 R9 R9 R93 TH700 TP70 TP706 TP80 TP80 TP803 U603 U606 U609 U70 U7050 U93 ZD700 (onepin) C756 VPP_.8V R707 SHORT C70 C75 L70 ZD700 V_BAT C730 TP70 C709 C708 C73 VAP_IO_.8V VAP_VCORE_.V VUSB_LDO_5V C76 R709 V_BAT PS_LNA_.8V R703 SHORT TH700 C705 R70 C706 C735 C70 VAP_IO_3.3V VAP_IO_.8V V_BAT C78 VADC_REF VADC_REF PREQ70 TP706 TP70 C738 C70 OSC700 C736 VSEL_.V VAP_IO_.8V SMPS3_SW N9 PBK N3 SMPS_SW N SMPS_ N3 SMPS5_IN N SMPS5_SW N5 LDO N6 LDO3 N7 LDO N8 SMPS5_ M6 LDO3_IN M7 SMPS3_ M8 SMPS3_ M9 PBK N SMPS3_IN N0 SMPS_ N SMPS_SW N SMPS3_IN M0 SMPS_ M SMPS_SW M SMPS_IN M3 SMPS_SW M SMPS_ M3 SMPS5_IN M SMPS5_ M5 SMPS_ L3 SMPS5_FDBK L VDD L5 LDO_IN L6 _DI_VIO L7 LDO_IN L8 _ANA L9 SMPS_IN M CLK3K K8 CLK3KAO K9 SMPS_IN L PADC_START L0 SMPS3_FDBK L SMPS_SW L SMPS_IN L3 SMPS_SW L PWM K SMPS_FDBK K3 SMPS_SW K SMPS_ K3 MSECURE K SYSEN K5 PREQ K6 INT K7 PWRON J CTLIC_SCL J3 CTLIC_SDA J NRESPWRON J5 SIM J9 SMPS_IN K MMC K0 PWM K PREQ3 H6 PREQ H7 _ANA H8 REEN J BATREMOVAL J0 DVSIC_SCL J SMPS_IN J SMPS_IN J3 SMPS_FDBK H VIO H0 DVSIC_SDA H SMPS_SW H SMPS_SW H3 RPWRON H REEN H3 NRESWARM H SMPS_ SMPS_ 3 VDD _DI_VRTC 3 PBK VBACKUP 6 ID 7 REF 8 CHR_EXTCHR_STATZ F3 CHR_EXTCHR_ENZ F BOOT F6 VBUS_DET F7 VRTC_IN F8 CHR_PROT_ATE PADC_IN5 0 SMPS_FDBK TESTEN E3 BOOT0 E LDO F VB F0 PADC_IN6 F LDO5_IN F LDO5 F3 LDO_IN F PADC_IN D8 AUE_RESP D9 _ANA E IREF E0 VDD E LDOLN_IN E LDOLN E3 CHR_BOOT E LDO6_IN D LDO6 D3 CHR_VREF D BOOT D3 CHR_CSIN D CHR_CSOUT D5 VPRO D6 VRTC D7 CHR_P C5 VAC C6 _ANA C7 REF C8 CLK3KAUDIO C9 VBUS D AUE_RESN D0 PADC_IN0 D VBUS C OSC3KCAP C0 VSYS_BB C CHR_VSYS C CHR_ATE_CTRL C3 CHR_PMID C CHR_SW C3 CHR_SW C CHR_PMID B CHR_SW B3 CHR_SW B CHR_P B5 CHR_LED_TEST B6 VDD B7 LDO7_IN B8 OSC3KOUT B9 LDOUSB A7 LDO7 A8 OSC3KIN A9 VBUS B VANA_IN B0 PADC_VREF B PADC_IN3 B CHR_VBAT B3 PADC_IN A PADC_IN A TESTV A3 CHR_PMID A CHR_SW A3 CHR_DET_N A CHR_P A5 CHR_LED_IN A6 U70 PBK A VANA A0 C707 L700 TP700 R7 R75 VUSB_3.3V SHORT C7 SHORT R705 C73 C7 C70 C737 VDD_RTC_.8V C79 C7 VDD_ANA C7 L703 VCXIO_.8V TP703 VAP_IO_.8V R706 VDD_IO_.8V C70 R70 TP70 R7 C7 VAP_VCORE3_.V L70 VAP_VCORE_.3V C703 L70 C700 PREQ700 VF ALS_OUT_.8V LCD_SELECT nrespwron nwarm_reset SYS_PREQ JION COLD_RST SYS_DRM_MSEC SYS_EN PMIC_IC_SCL PMIC_IC_SDA T_FLASH_DETECT USB_OT_ID CLK3K_AP CLK3K_AUDIO PS_BT_CLK3K PHEONIX_IC_SCL PHEONIX_IC_SDA SYS_nIRQ BAT_REMOVAL BOOT_0 BOOT_ BOOT_

37 Level 3 Repair Initial Initial Failure Re-download SW the cell-phone. Abnormal Check the AP Reset nwarm_reset(zd700) =.8V(High) Check the UCP600 (crack, open, etc.) Check the oscillator clock waveforms KHz : OSC700(C75), Mhz : OSC600(C695) Abnormal Check the OSC700, OSC600.(Crack, open etc.) Check the output clock waveforms and frequency. Test condition (Oscilloscope setting) :0.0us.div (time division) rmal Change UCP600,U70 Abnormal Change PBA END 8-7

38 Level 3 Repair 8-8 BOTH06 BOTH07 BOTHHO C00 C0 C600 C60 C60 C603 C60 C605 C606 C607 C608 C609 C60 C6 C6 C63 C6 C65 C66 C67 C68 C69 C60 C6 C6 C63 C6 C65 C66 C67 C68 C69 C630 C63 C63 C633 C63 C635 C636 C637 C638 C639 C60 C6 C6 C63 C6 C65 C66 C67 C68 C69 C650 C65 C65 C653 C65 C655 C656 C657 C658 C659 C660 C66 C66 C663 C66 C665 C666 C667 C668 C669 C670 C67 C67 C673 C67 C675 C676 C677 C68 C683 C68 C685 C695 C696 C697 C700 C70 C70 C703 C70 C705 C706 C707 C708 C70 C709 C7 C7 C73 C7 C75 C76 C78 C79 C70 C7 C7 C730 C73 C735 C736 C737 C738 C75 C755 C756 C80 C803 C80 C805 C85 C86 C85 C900 C90 C90 C903 C90 C9 C93 C99 C930 C93 C93 C933 C93 C935 C936 C939 CM 80 F F80 F800 HDC80 HDC90 L700 L70 L70 L703 L70 L90 OSC600 OSC700 PREQ700PREQ70 R00 R3R30 R600 R60 R60 R60 3 R60 R605 R606 R607 R608 R609 R60 R6 R6 R63 R6 R65 R66 R67 R68 R69 R63 R6 R66 R67 R68 R69 R65 R66 R67 R68 R65 R65 6 R667 R66 8 R68 R683 R685 R686 R687 R688 R689 R690 R69 R69 R69 R695 R70 R703 R70 R706 R707 R708 R709 R7 R75 R77 R78 R79 R7 R7 R75 R76 R800 R83 R8 R85 R86 R87 R88 R83 R8 R85 R900 R90 93 R R9 R9 0 R9 R9 R93 TH700 TP0 TP0 TP60 0 TP60 TP60 TP603 TP60TP605 TP70 TP70 TP70 TP706 TP80 TP80 TP803 TP80 TP805 TP806 TR500 U00 U60 U603 U606 U609 U70 U705 U80 U803 U900 U93 UCP600 ZD700 C695 VAP_IO_.8V R69 SW VDD OSC600 OUT 3 FREF_38.M_IN FREF_CLK_REQ R707 SHORT C70 C75 ZD700 C73 C76 R709 R703 SHORT C705 R70 C706 C70 VADC_REF PREQ70 TP70 OSC700 VDD L5 CLK3K K8 CLK3KAO K9 PWM K MSECURE K SYSEN K5 PREQ K6 INT K7 PWRON J CTLIC_SCL J3 CTLIC_SDA J NRESPWRON J5 SIM J9 MMC K0 PWM K PREQ3 H6 PREQ H7 REEN J BATREMOVAL J0 DVSIC_SCL J VIO H0 DVSIC_SDA H RPWRON H REEN H3 NRESWARM H VDD VBACKUP 6 ID 7 BOOT F6 TESTEN E3 BOOT0 E VB F0 AUE_RESP D9 IREF E0 VDD E BOOT D3 VPRO D6 VAC C6 CLK3KAUDIO C9 AUE_RESN D0 D OSC3KCAP C0 VDD B7 OSC3KOUT B9 OSC3KIN A9 TESTV A3 TP700 SHORT R705 C7 TP703 VAP_IO_.8V R706 R70 TP70 R7 C700 PREQ700 nrespwron nwarm_reset SYS_PREQ JION COLD_RST SYS_DRM_MSEC SYS_EN PMIC_IC_SCL PMIC_IC_SDA T_FLASH_DETECT USB_OT_ID CLK3K_AP CLK3K_AUDIO PS_BT_CLK3K PHEONIX_IC_SCL PHEONIX_IC_SDA SYS_nIRQ BAT_REMOVAL BOOT_0 BOOT_ BOOT_

39 Level 3 Repair Service service Check memu setting Menu applications setting wireless and network mobile networks network mode setting is auto mode? Menu Phone Keypad *#3# check Phone version PHONE : P300XXXX or PHONE : unknown PHONE : P300XXXX Check the connection of RF contact and intenna PHONE : unknown Check the CP_VSD,CP_VSD_.8V CP_VSD (C336) =0.9~.V CP_VSD (C35) =.8V Replace the UCP300 Check VREF VREF ( C3) =600mV Replace the UCP300 Abnormal Change the board END 8-9

40 R9 VSS U6 VSS P VSS_PLL E VSS_PMU M6 VSS_RTC F SD_ SD_ VSS_SD B VSS_SD N VSS_USB V A A7 R U U7 EINT3 IC_SCL IC_SDA P IS_RX P IS_TX R IS_WA0 R IS_WA N IS_CLK0 N IS_CLK U7 DI3_RX_DAT T7 DI3_TX_DAT U8 DI3_RX_DATX T8 DI3_TX_DATX M M M3 M ON ON_N SD_FB SD_SW SD_SW CC_CLK CC_IO CC_RST CLKOUT0 CLKOUT F3K OSC3K T_OUT0 T_OUT U T3 T T DMINUS U DPLUS HW_MON HW_MON K0 N0 P9 H6 J6 J5 J H J N8 P0 L7 M7 N P3 R6 P7 R7 USB_DMINUS T7 USB_DPLUS N6 USB_ID P7 USB_TEST T6 USB_TUNE U3 HSIC_USB_DATA U HSIC_USB_STRB T USIF_SCLK U USIF_CTS_N U3 USIF_RTS_N T USIF_RXD_MRST T3 USIF_TXD_MTSR K3 REF_CLK_EN U9 SYSCLKEN P SYS_CLK F6 TRI_B T5 TRI_IN R5 RESET_N K RESET_BB_N J3 RESET_PWRDWN_N U0 ALERT_N T TRST_N T9 XRESET_N D ANAMON A6 FCDP_RBN E3 FSS B8 FWP T6 TCK U5 TDI U TDO U6 TMS K TM_EN J VREF F VRTC RESERVED D3 D E C SD_FB A SD_SW A3 SD_SW DSP_AUDIO_IN B6 H8 SHORT SHORT TH300 Level 3 Repair PS_CNTL TP_PS_CLK_EN TP_PHONE_ACTIVE PS_CLK_EN PHONE_ACTIVE V_BAT DI3_RX_DAT DI3_TX_DAT DI3_RX_DATX DI3_TX_DATX R306 R305 R307 CP_VSD_.8V CP_VSD_.V TP_CP_ON TP3 L30 CP_ON L303 C335 SIM_CLK SIM_IO SIM_RST C336 VSD_ TP_CALL_MCLK C337 VSD_ CP300 RF_TOUCH_EN OSC300 C3 HW_MON HW_MON DSP_AUDIO_IN CP_VSD_.8V R35 TP33 TP3 CP_D- CP_D+ R36 TP35 TP36 R37 R38 AP_FLM_TXD AP_FLM_RXD R39 PS_VOUT_CP TP38 TP_RESET_REQ_N TP_RESET_N_RF REF_CLK_EN SYS_CLK_EN SYS_CLK_6M TRI_IN RESET_REQ_N TRST_N_CP RESET_N_RF TCK_CP TDI_CP TDO_CP TMS_CP VRTC_.8V R30 RESET_PWRDWN_N VRTC_.8V TP_RESET_ALL C33 R309 U300 C3 CP_PMU_RST A 5 VCC R33 3 B OUTY RESET_PWRDWN_N R3 8-0

41 ZD30 ZD300 C7 C C7 C C5 C C5 C 6 SHORT Level 3 Repair Sim Part Insert SIM card Check the Pin Soldering of SIM300 Resoldering and recheck Check the SIM Voltage. (R30) >=.8 or 3.0? Change to the new SIM card. If it doesn`t still work SIM card after changeing the SIM card, Check the UCP300 (Crack etc) END SIM_IO SIM_RST D300 CP_VSIM_3.0V VAP_IO_.8V R308 R30 SIM300 SIM_IO SIM_CLK C8 C8 C3 C3 C6 C6 C C R3 SIM_DETECT SIM_RST 8 C30 C3 C338 C339 8-

42 C739 C79 C50 C77 C78 U706 U50 L705 C509 C75 C750 C73 C76C75 TR70 R733 R670 U703 R67 TR70 R73 C75 TR705 R58 D50 ZD503 C7 D50 D503 C53 IFC500 B5 A6 C6 A5 C C D E E E5 B6 A A A3 SDA SCL USB5 HC EN OT LBR USBIN USBIN USBIN D+ D- STAT B D3 VOUTL B D VOUT B3 D5 VOUT FETDRV SW SW SW CSIN CSOUT CSOUT AUXPWR THERM B C3 C C5 E3 D6 E6 E A D 9 D Level 3 Repair Charging Part TA / USB Insert Charging Sequence Start Vin =5V Check C509 =5V, or may not connected TA / USB Battery is Charging? Resolder or Replace U706 END V_BUS_IN VUSB_5V JTA_VBUS U50 V_BAT IN VBAT 8 _FLA 7 C75 C76 VOUT_CHARER TR70 C509 3 ILIM 9 OUT S 6 _EN 5 IF_CON_SENSE CH_SDA_.8V CH_SCL_.8V TA_EN VUSB_5V R708 C77 C78 L705 R73 S S 3 S D 8 7 D D 6 5 D R55 C79 C739 U706 C73 C73 C733 C70 VAP_IO_.8V C50 R70 R7 TA_nCH ZD 505 ZD 506 R5 5 U70 7 C7 7 ZD 50 CON0 6 R533 R53 ZD50 R53 R5 7 R5 6 C5 C7 R530 R59 C7 0 C73 C733 R73 R7 R70 8-

43 Level 3 Repair Microphone Part (Main MIC) Check main microphone function in voice call receiver mode or in Voice Recording mode Check Sub-PCB module where main MIC is placed for any damage (Tear in FPC, etc) Change the Sub-PCB module Check the voltage at C =.8V Resolder or replace U0 Check component soldering statuses of C0, C Resolder or replace C0, C END 8-3

44 Level 3 Repair 8-

45 Level 3 Repair Microphone Part (Sub MIC) Check Sub microphone function in voice call loudspk mode or in camcording mode Check Earjack module where Sub MIC is placed for any damage (Tear in FPC, etc) Replace the Earjack module Check the voltage at C6 =.8V Resolder or replace U03 Check component soldering statuses of C, C6 Resolder or replace C, C6 END 8-5

46 Level 3 Repair 8-6

47 Level 3 Repair Speaker Part Check speaker function. Play MP3 with maximum volume level. Check the connection of HDC00(L), HEA00(R) Reconnect HDC00(L), HEA00(R) Check the signals on ZD00 pad, ZD0 pad(l) ZD06 pad, ZD07 pad(r) Resolder or replace U06 Replace the speaker module END 8-7

48 Level 3 Repair 8-8

49 Level 3 Repair Receiver Part Check receiver function in voice call receiver mode. Check the connection of HDC90 Reconnect HDC90 Check RCV module where RCV's placed for any damage (Tear in FPC, etc) Replace the RCV module Check the signals on R909, R9 Resolder or replace U06 END 8-9

50 Level 3 Repair 8-0

51 Level 3 Repair BT BT is not working Check BT function ON Enable BT Function Check the Voltage on C5 =.8V Check the U70(crack, open, damaged, etc.) Check 37. MHz Clock at C, C Check the OSC0(crack, open, etc.) Check BT_WIFI_CLK3K at C8 the U70 Check the Status of C3, L08, C8 Resolder or Replace U0 Check the Status of C35, L09, C37, C36, L07, C38, ANT0 Resolder or Replace F0 Resolder or Replace U03 END 8-

52 Level 3 Repair 8- BT/WIFI OSC WIFI LNA() TP0 3 IN OUT VOUT_3P3_3.3V F0 C TP_WLAN_SD_CLK C38 VDD_CORE_.V VOUT_3P3_3.3V TP_BT_nRST C9 VDD_PA_DRV TP_BT_PCM_DOUT TP_BT_PCM_SY VDD_LN_.V C3 C8 C5 L R08 VDD_WRF_.V R07 L05 L08 VDD_CORE_.V C0 TP03 VAP_IO_.8V C8 TP_WLAN_EN RX 8 5 TX 3 VC VC 9 VDD VREF LNA_EN ANT 6 BT 3 C TP_BT_PCM_DIN U0 L09 VDD_LN_.V C6 TP_BT_PCM_CLK C7 VOUT_3P3_3.3V V_BATT_WIFI L06 R ANT0 VDD_BT_.V VDD_WRF_.V VIN_LDO L M3 WL_VDDO_0 M RF_SW_CTRL_3 M5 SDIO_DATA M6 SDIO_DATA0 M7 SDIO_CLK M8 SDIO_DATA M9 VOUT_CLDO L7 SDIO_CMD L8 SDIO_DATA3 L9 WL_RE_ON M HSIC_AVSS M0 VDD_LDO M SR_PVSS M SR_VLX M HSIC_STROBE L0 VOUT_LNLDO L PMU_AVSS L SR_VDDBAT L HSIC_DATA L3 VDDIO_RF_0 L RF_SW_CTRL_ L5 WL_VSS_ L6 WL_PIO_5 K3 RF_SW_CTRL_ K RF_SW_CTRL_7 K5 RF_SW_CTRL_0 K6 PCM_SY K7 WL_VDDC_ K8 BT_VDDC_0 K9 EXT_SMPS_REQ L HSIC_AVDD J7 LPO J8 WL_PIO_ J9 BT_PIO_5 K WL_VDDC_0 K0 BT_RE_ON K SR_VDDBAT K SR_VDDBAT K WL_VSS_0 J0 EXT_PWM_REQ J VOUT_3P J VOUT_3P3 J RF_SW_CTRL_ J3 RF_SW_CTRL_6 J RF_SW_CTRL_5 J5 PCM_OUT J6 PCM_IN H3 WRF_XTAL_VDDP H WL_PIO_0 H5 WL_PIO_ H6 PCM_CLK H7 IS_DO H8 BT_PIO_6 H9 BT_PIO_3 J HSIC_RREF 5 WL_PIO_ 6 UART_CTS_N 7 IS_DI 8 BT_PIO_7 H WRF_XTAL_ON H0 BT_PIO_ H BT_PIO_ H WRF_XTAL_ F8 BT_VSSC_ F9 BT_PIO_0 WRF_XTAL_OP 0 BT_RST_N TM0 _FOR_A0 CLK_REQ_OUT 3 WRF_TCXO_IN WRF_AFE_VDDP FM_VSSVCO F FM_VDDP5 F WRF_VCO_LDO_OUT_VDDP F3 WRF_TCXO_VDD3P3 F WRF_AFE_ F5 JTA_SEL F6 UART_RTS_N F7 BT_VDDO_0 E WRF_PIO_OUT E5 WL_VSS_ E6 UART_RXD E7 WL_VDDC_ E8 BT_VDDC_ E9 CLK_REQ_MODE F WRF_VCO_ F0 FM_PLLVSS F D7 CLK_REQ_IN D8 WL_PIO_6 D9 BT_PIO_ E WRF_VCO_LDO_IN_VDDP8 E0 FM_PLLVDD E FM_RFVSS E FM_RFVDDP E3 WRF_RES_EXT D0 FM_AUDIOVDD D FM_RXP D FM_RXN D WRF_LOEN_A_VDDP D3 WRF_LOEN_A_ D WRF_A_TSSI_IN D5 WL_PIO_3 D6 UART_TXD C FM_TX C3 WRF_PADRV_VDD5P0 C WRF_PADRV_ C5 WRF_ C7 WRF_LNA_ C8 BT_IFVSS C9 BT_VSS D WRF_ANA_VDDP B WRF_PA_ B6 WRF_PA_ B7 WRF_LNA_VDDP B8 BT_IFVDDP B9 BT_RFVDDP C WRF_ANA_ C0 BT_PLLVSS C FM_VSSAUDIO A7 WRF_RFIN A8 BT_PAVDD3P3 A9 BT_RF B WRF_RFIN_5 B0 BT_RFVSS B BT_PLLVDDP B FM_AOUT B WRF_PA_ A0 BT_FEVSS A BT_VCOVDDP A FM_AOUT A WRF_RFOUT_5 A WRF_PA_VDD5P0 A6 WRF_RFOUT U03 C33 VDD_CORE_.V C C39 VDD_PA_ C8 TP0 C36 C3 C6 3 TP_WLAN_HOST_WAKE V_BAT OSC0 C37 C3 C35 VIN_LDO C C30 VOUT_3P 3 3 VAP_IO_.8V SC0 C7 TP05 R3 R06 C9 C5 TP0 C7 C3 TP00 C3 C6 VOUT_3P3_3.3V TP_BT_EN C5 L07 C WRF_IN_ SW_WLAN_TX SW_WLAN_BT_RX LNA_ANT_ LNA_ANT_ SW_BT_TX LNA EN BT_RF_TX WRF_OUT_ BT_nRST BT_UART_CTS BT_PCM_SY BT_PCM_DIN BT_RF_TX BT_EN BT_WIFI_CLK3K BT_WAKE BT_HOST_WAKE BT_PCM_CLK BT_PCM_DOUT BT_UART_RXD BT_UART_RTS BT_UART_TXD WRF_IN_ WRF_OUT_ XTAL_3700_OUT XTAL_3700_IN SW_BT_TX SW_WLAN_BT_RX SW_WLAN_TX LNA EN WLAN_HOST_WAKE WLAN_EN PS_CLK3K XTAL_3700_IN XTAL_3700_OUT BT_WIFI_CLK3K PS_BT_CLK3K (onepin) C756 VPP_.8V R707 SHORT C70 C75 L70 ZD700 V_BAT C730 TP70 C709 C708 C73 VAP_IO_.8V VAP_VCORE_.V VUSB_LDO_5V C76 R709 V_BAT PS_LNA_.8V R703 SHORT TH700 C705 R70 C706 C735 C70 VAP_IO_3.3V VAP_IO_.8V V_BAT C78 VADC_REF VADC_REF PREQ70 TP706 TP70 C738 C70 OSC700 C736 VSEL_.V VAP_IO_.8V SMPS3_SW N9 PBK N3 SMPS_SW N SMPS_ N3 SMPS5_IN N SMPS5_SW N5 LDO N6 LDO3 N7 LDO N8 SMPS5_ M6 LDO3_IN M7 SMPS3_ M8 SMPS3_ M9 PBK N SMPS3_IN N0 SMPS_ N SMPS_SW N SMPS3_IN M0 SMPS_ M SMPS_SW M SMPS_IN M3 SMPS_SW M SMPS_ M3 SMPS5_IN M SMPS5_ M5 SMPS_ L3 SMPS5_FDBK L VDD L5 LDO_IN L6 _DI_VIO L7 LDO_IN L8 _ANA L9 SMPS_IN M CLK3K K8 CLK3KAO K9 SMPS_IN L PADC_START L0 SMPS3_FDBK L SMPS_SW L SMPS_IN L3 SMPS_SW L PWM K SMPS_FDBK K3 SMPS_SW K SMPS_ K3 MSECURE K SYSEN K5 PREQ K6 INT K7 PWRON J CTLIC_SCL J3 CTLIC_SDA J NRESPWRON J5 SIM J9 SMPS_IN K MMC K0 PWM K PREQ3 H6 PREQ H7 _ANA H8 REEN J BATREMOVAL J0 DVSIC_SCL J SMPS_IN J SMPS_IN J3 SMPS_FDBK H VIO H0 DVSIC_SDA H SMPS_SW H SMPS_SW H3 RPWRON H REEN H3 NRESWARM H SMPS_ SMPS_ 3 VDD _DI_VRTC 3 PBK VBACKUP 6 ID 7 REF 8 CHR_EXTCHR_STATZ F3 CHR_EXTCHR_ENZ F BOOT F6 VBUS_DET F7 VRTC_IN F8 CHR_PROT_ATE PADC_IN5 0 SMPS_FDBK TESTEN E3 BOOT0 E LDO F VB F0 PADC_IN6 F LDO5_IN F LDO5 F3 LDO_IN F PADC_IN D8 AUE_RESP D9 _ANA E IREF E0 VDD E LDOLN_IN E LDOLN E3 CHR_BOOT E LDO6_IN D LDO6 D3 CHR_VREF D BOOT D3 CHR_CSIN D CHR_CSOUT D5 VPRO D6 VRTC D7 CHR_P C5 VAC C6 _ANA C7 REF C8 CLK3KAUDIO C9 VBUS D AUE_RESN D0 PADC_IN0 D VBUS C OSC3KCAP C0 VSYS_BB C CHR_VSYS C CHR_ATE_CTRL C3 CHR_PMID C CHR_SW C3 CHR_SW C CHR_PMID B CHR_SW B3 CHR_SW B CHR_P B5 CHR_LED_TEST B6 VDD B7 LDO7_IN B8 OSC3KOUT B9 LDOUSB A7 LDO7 A8 OSC3KIN A9 VBUS B VANA_IN B0 PADC_VREF B PADC_IN3 B CHR_VBAT B3 PADC_IN A PADC_IN A TESTV A3 CHR_PMID A CHR_SW A3 CHR_DET_N A CHR_P A5 CHR_LED_IN A6 U70 PBK A VANA A0 C707 L700 TP700 R7 R75 VUSB_3.3V SHORT C7 SHORT R705 C73 C7 C70 C737 VDD_RTC_.8V C79 C7 VDD_ANA C7 L703 VCXIO_.8V TP703 VAP_IO_.8V R706 VDD_IO_.8V C70 R70 TP70 R7 C7 VAP_VCORE3_.V L70 VAP_VCORE_.3V C703 L70 C700 PREQ700 VF ALS_OUT_.8V LCD_SELECT nrespwron nwarm_reset SYS_PREQ JION COLD_RST SYS_DRM_MSEC SYS_EN PMIC_IC_SCL PMIC_IC_SDA T_FLASH_DETECT USB_OT_ID CLK3K_AP CLK3K_AUDIO PS_BT_CLK3K PHEONIX_IC_SCL PHEONIX_IC_SDA SYS_nIRQ BAT_REMOVAL BOOT_0 BOOT_ BOOT_

53 PREQ700PREQ70 TP_ WLAN _ EN TP _BT_P CM_D IN TP_W LAN_SD_CLK TP_BT_PCM_SY TP _B T_PCM_ CLK TP_BT_PCM_ DOUT TP_W LAN _ HOST _W AKE Level 3 Repair BOTH00 BOTH0 C7 HDC00 ZD0 ZD00 TP0 L C7 C3 C9 C30 L0 R0 6 L09 C35 TP00 C6 C3 C C9 C8 C3 C C3 C7 C F0 L06 R3 R R09 R R0 C C7 L C5 C8 C3 L08 C5 C5 C6 SC0 U03 U0 C6 TP05 TP0 C R07 C L05 C0 C0 C39 TP03 TP0 OSC0 C8 L03 C33 R08 TP703 U700 C73 R5 C508 U503 R5 R50 C507 C909 R653 R65 C90 R57 U90 C37 L07 C36 C38 BOTH05 ANT0 R0 R03 R05 C R87 U TP80 R695 C73 TP80 C706 C78 TP803 R7 R77 R76 R79 R75 R78 C700 C70 ZD700 R703 C79 C756 C707 L700 C805 C70 0 L70 OSC700 C735 C76 C70 C C C738 C73 C705 U70 TP706 TP70 L70 C9 C99 C93 C933 R9 0 R9 C93 R93 C93 R9 C930 C C936 C7 C7 C7 C70 C703 C708 C7 C755 R70 U93 R709 C7 L90 C730 TH700 L703 C70 L70 U705 C75 R68 R683 R7 R75 R6 C737 C736 BOTH 8-3

54 Level 3 Repair WIFI WIFI is not working Check WIFI function ON Enable WIFI Function Check the Voltage on C5 =.8V Check the U70(crack, open, damaged, etc.) Check 37. MHz Clock at C, C Check the OSC0(crack, open, etc.) Check BT_WIFI_CLK3K at C8 the U70 Check the Status of C3, L08, C8 Resolder or Replace U0 Check the Status of C35, L09, C37, C36, L07, C38, ANT0 Resolder or Replace F0 Resolder or Replace U03 END 8-

55 Level 3 Repair 8-5 BT/WIFI OSC WIFI LNA() TP0 3 IN OUT VOUT_3P3_3.3V F0 C TP_WLAN_SD_CLK C38 VDD_CORE_.V VOUT_3P3_3.3V TP_BT_nRST C9 VDD_PA_DRV TP_BT_PCM_DOUT TP_BT_PCM_SY VDD_LN_.V C3 C8 C5 L R08 VDD_WRF_.V R07 L05 L08 VDD_CORE_.V C0 TP03 VAP_IO_.8V C8 TP_WLAN_EN RX 8 5 TX 3 VC VC 9 VDD VREF LNA_EN ANT 6 BT 3 C TP_BT_PCM_DIN U0 L09 VDD_LN_.V C6 TP_BT_PCM_CLK C7 VOUT_3P3_3.3V V_BATT_WIFI L06 R ANT0 VDD_BT_.V VDD_WRF_.V VIN_LDO L M3 WL_VDDO_0 M RF_SW_CTRL_3 M5 SDIO_DATA M6 SDIO_DATA0 M7 SDIO_CLK M8 SDIO_DATA M9 VOUT_CLDO L7 SDIO_CMD L8 SDIO_DATA3 L9 WL_RE_ON M HSIC_AVSS M0 VDD_LDO M SR_PVSS M SR_VLX M HSIC_STROBE L0 VOUT_LNLDO L PMU_AVSS L SR_VDDBAT L HSIC_DATA L3 VDDIO_RF_0 L RF_SW_CTRL_ L5 WL_VSS_ L6 WL_PIO_5 K3 RF_SW_CTRL_ K RF_SW_CTRL_7 K5 RF_SW_CTRL_0 K6 PCM_SY K7 WL_VDDC_ K8 BT_VDDC_0 K9 EXT_SMPS_REQ L HSIC_AVDD J7 LPO J8 WL_PIO_ J9 BT_PIO_5 K WL_VDDC_0 K0 BT_RE_ON K SR_VDDBAT K SR_VDDBAT K WL_VSS_0 J0 EXT_PWM_REQ J VOUT_3P J VOUT_3P3 J RF_SW_CTRL_ J3 RF_SW_CTRL_6 J RF_SW_CTRL_5 J5 PCM_OUT J6 PCM_IN H3 WRF_XTAL_VDDP H WL_PIO_0 H5 WL_PIO_ H6 PCM_CLK H7 IS_DO H8 BT_PIO_6 H9 BT_PIO_3 J HSIC_RREF 5 WL_PIO_ 6 UART_CTS_N 7 IS_DI 8 BT_PIO_7 H WRF_XTAL_ON H0 BT_PIO_ H BT_PIO_ H WRF_XTAL_ F8 BT_VSSC_ F9 BT_PIO_0 WRF_XTAL_OP 0 BT_RST_N TM0 _FOR_A0 CLK_REQ_OUT 3 WRF_TCXO_IN WRF_AFE_VDDP FM_VSSVCO F FM_VDDP5 F WRF_VCO_LDO_OUT_VDDP F3 WRF_TCXO_VDD3P3 F WRF_AFE_ F5 JTA_SEL F6 UART_RTS_N F7 BT_VDDO_0 E WRF_PIO_OUT E5 WL_VSS_ E6 UART_RXD E7 WL_VDDC_ E8 BT_VDDC_ E9 CLK_REQ_MODE F WRF_VCO_ F0 FM_PLLVSS F D7 CLK_REQ_IN D8 WL_PIO_6 D9 BT_PIO_ E WRF_VCO_LDO_IN_VDDP8 E0 FM_PLLVDD E FM_RFVSS E FM_RFVDDP E3 WRF_RES_EXT D0 FM_AUDIOVDD D FM_RXP D FM_RXN D WRF_LOEN_A_VDDP D3 WRF_LOEN_A_ D WRF_A_TSSI_IN D5 WL_PIO_3 D6 UART_TXD C FM_TX C3 WRF_PADRV_VDD5P0 C WRF_PADRV_ C5 WRF_ C7 WRF_LNA_ C8 BT_IFVSS C9 BT_VSS D WRF_ANA_VDDP B WRF_PA_ B6 WRF_PA_ B7 WRF_LNA_VDDP B8 BT_IFVDDP B9 BT_RFVDDP C WRF_ANA_ C0 BT_PLLVSS C FM_VSSAUDIO A7 WRF_RFIN A8 BT_PAVDD3P3 A9 BT_RF B WRF_RFIN_5 B0 BT_RFVSS B BT_PLLVDDP B FM_AOUT B WRF_PA_ A0 BT_FEVSS A BT_VCOVDDP A FM_AOUT A WRF_RFOUT_5 A WRF_PA_VDD5P0 A6 WRF_RFOUT U03 C33 VDD_CORE_.V C C39 VDD_PA_ C8 TP0 C36 C3 C6 3 TP_WLAN_HOST_WAKE V_BAT OSC0 C37 C3 C35 VIN_LDO C C30 VOUT_3P 3 3 VAP_IO_.8V SC0 C7 TP05 R3 R06 C9 C5 TP0 C7 C3 TP00 C3 C6 VOUT_3P3_3.3V TP_BT_EN C5 L07 C WRF_IN_ SW_WLAN_TX SW_WLAN_BT_RX LNA_ANT_ LNA_ANT_ SW_BT_TX LNA EN BT_RF_TX WRF_OUT_ BT_nRST BT_UART_CTS BT_PCM_SY BT_PCM_DIN BT_RF_TX BT_EN BT_WIFI_CLK3K BT_WAKE BT_HOST_WAKE BT_PCM_CLK BT_PCM_DOUT BT_UART_RXD BT_UART_RTS BT_UART_TXD WRF_IN_ WRF_OUT_ XTAL_3700_OUT XTAL_3700_IN SW_BT_TX SW_WLAN_BT_RX SW_WLAN_TX LNA EN WLAN_HOST_WAKE WLAN_EN PS_CLK3K XTAL_3700_IN XTAL_3700_OUT BT_WIFI_CLK3K PS_BT_CLK3K (onepin) C756 VPP_.8V R707 SHORT C70 C75 L70 ZD700 V_BAT C730 TP70 C709 C708 C73 VAP_IO_.8V VAP_VCORE_.V VUSB_LDO_5V C76 R709 V_BAT PS_LNA_.8V R703 SHORT TH700 C705 R70 C706 C735 C70 VAP_IO_3.3V VAP_IO_.8V V_BAT C78 VADC_REF VADC_REF PREQ70 TP706 TP70 C738 C70 OSC700 C736 VSEL_.V VAP_IO_.8V SMPS3_SW N9 PBK N3 SMPS_SW N SMPS_ N3 SMPS5_IN N SMPS5_SW N5 LDO N6 LDO3 N7 LDO N8 SMPS5_ M6 LDO3_IN M7 SMPS3_ M8 SMPS3_ M9 PBK N SMPS3_IN N0 SMPS_ N SMPS_SW N SMPS3_IN M0 SMPS_ M SMPS_SW M SMPS_IN M3 SMPS_SW M SMPS_ M3 SMPS5_IN M SMPS5_ M5 SMPS_ L3 SMPS5_FDBK L VDD L5 LDO_IN L6 _DI_VIO L7 LDO_IN L8 _ANA L9 SMPS_IN M CLK3K K8 CLK3KAO K9 SMPS_IN L PADC_START L0 SMPS3_FDBK L SMPS_SW L SMPS_IN L3 SMPS_SW L PWM K SMPS_FDBK K3 SMPS_SW K SMPS_ K3 MSECURE K SYSEN K5 PREQ K6 INT K7 PWRON J CTLIC_SCL J3 CTLIC_SDA J NRESPWRON J5 SIM J9 SMPS_IN K MMC K0 PWM K PREQ3 H6 PREQ H7 _ANA H8 REEN J BATREMOVAL J0 DVSIC_SCL J SMPS_IN J SMPS_IN J3 SMPS_FDBK H VIO H0 DVSIC_SDA H SMPS_SW H SMPS_SW H3 RPWRON H REEN H3 NRESWARM H SMPS_ SMPS_ 3 VDD _DI_VRTC 3 PBK VBACKUP 6 ID 7 REF 8 CHR_EXTCHR_STATZ F3 CHR_EXTCHR_ENZ F BOOT F6 VBUS_DET F7 VRTC_IN F8 CHR_PROT_ATE PADC_IN5 0 SMPS_FDBK TESTEN E3 BOOT0 E LDO F VB F0 PADC_IN6 F LDO5_IN F LDO5 F3 LDO_IN F PADC_IN D8 AUE_RESP D9 _ANA E IREF E0 VDD E LDOLN_IN E LDOLN E3 CHR_BOOT E LDO6_IN D LDO6 D3 CHR_VREF D BOOT D3 CHR_CSIN D CHR_CSOUT D5 VPRO D6 VRTC D7 CHR_P C5 VAC C6 _ANA C7 REF C8 CLK3KAUDIO C9 VBUS D AUE_RESN D0 PADC_IN0 D VBUS C OSC3KCAP C0 VSYS_BB C CHR_VSYS C CHR_ATE_CTRL C3 CHR_PMID C CHR_SW C3 CHR_SW C CHR_PMID B CHR_SW B3 CHR_SW B CHR_P B5 CHR_LED_TEST B6 VDD B7 LDO7_IN B8 OSC3KOUT B9 LDOUSB A7 LDO7 A8 OSC3KIN A9 VBUS B VANA_IN B0 PADC_VREF B PADC_IN3 B CHR_VBAT B3 PADC_IN A PADC_IN A TESTV A3 CHR_PMID A CHR_SW A3 CHR_DET_N A CHR_P A5 CHR_LED_IN A6 U70 PBK A VANA A0 C707 L700 TP700 R7 R75 VUSB_3.3V SHORT C7 SHORT R705 C73 C7 C70 C737 VDD_RTC_.8V C79 C7 VDD_ANA C7 L703 VCXIO_.8V TP703 VAP_IO_.8V R706 VDD_IO_.8V C70 R70 TP70 R7 C7 VAP_VCORE3_.V L70 VAP_VCORE_.3V C703 L70 C700 PREQ700 VF ALS_OUT_.8V LCD_SELECT nrespwron nwarm_reset SYS_PREQ JION COLD_RST SYS_DRM_MSEC SYS_EN PMIC_IC_SCL PMIC_IC_SDA T_FLASH_DETECT USB_OT_ID CLK3K_AP CLK3K_AUDIO PS_BT_CLK3K PHEONIX_IC_SCL PHEONIX_IC_SDA SYS_nIRQ BAT_REMOVAL BOOT_0 BOOT_ BOOT_

56 PREQ700PREQ70 TP_ WLAN _ EN TP _BT_P CM_D IN TP_W LAN_SD_CLK TP_BT_PCM_SYN C TP _B T_PCM_ CLK TP_BT_PCM_ DOUT TP_W L AN _ HOST _W AKE Level 3 Repair BOTH00 BOTH0 C7 HDC00 ZD0 ZD00 TP0 L C7 C3 C9 C30 L0 R0 6 L09 C35 TP00 C6 C3 C C9 C8 C3 C C3 C7 C F0 L06 R3 R R09 R R0 C C7 L C5 C8 C3 L08 C5 C5 C6 SC0 U03 U0 C6 TP05 TP0 C R07 C L05 C0 C0 C39 TP03 TP0 OSC0 C8 L03 C33 R08 TP703 U700 C73 R5 C508 U503 R5 R50 C507 C909 R653 R65 C90 R57 U90 C37 L07 C36 C38 BOTH05 ANT0 R0 R03 R05 C R87 U TP80 R695 C73 TP80 C706 C78 TP803 R7 R77 R76 R79 R75 R78 C700 C70 ZD700 R703 C79 C756 C707 L700 C805 C70 0 L70 OSC700 C735 C76 C70 C C C738 C73 C705 U70 TP706 TP70 L70 C9 C99 C93 C933 R9 0 R9 C93 R93 C93 R9 C930 C C936 C7 C7 C7 C70 C703 C708 C7 C755 R70 U93 R709 C7 L90 C730 TH700 L703 C70 L70 U705 C75 R68 R683 R7 R75 R6 C737 C736 BOTH 8-6

RigExpert AA-170 Antenna Analyzer (0.1 to 170 MHz) User s manual

RigExpert AA-170 Antenna Analyzer (0.1 to 170 MHz) User s manual RigExpert AA-170 Antenna Analyzer (0.1 to 170 MHz) User s manual Table of contents 1. Description... 3 2. Specifications... 4 3. Precautions... 5 4. Operation... 6 4.1. Preparation for use... 6 4.2. Turning

More information

HF-Z100A ZigBee Module Datasheet

HF-Z100A ZigBee Module Datasheet HF-Z100A ZigBee Module Datasheet V 1.0 TABLE OF CONTENTS LIST OF FIGURES... 2 LIST OF TABLES... 2 HISTORY... 2 1. PRODUCT OVERVIEW... 3 1.1. General Description... 3 1.2. Device Features... 3 1.3. Device

More information

AA-35 ZOOM. RigExpert. User s manual. Antenna and cable analyzer

AA-35 ZOOM. RigExpert. User s manual. Antenna and cable analyzer AA-35 ZOOM Antenna and cable analyzer RigExpert User s manual . Table of contents Introduction Operating the AA-35 ZOOM First time use Main menu Multifunctional keys Connecting to your antenna SWR chart

More information

Build this Direct Digital Synthesizer "Development Kit" By: Diz Gentzow, W8DIZ

Build this Direct Digital Synthesizer Development Kit By: Diz Gentzow, W8DIZ Build this Direct Digital Synthesizer "Development Kit" By: Diz Gentzow, W8DIZ A great tutorial for adding a keypad to the DDS Kit by Bruce, W8BH This manual has been prepared to be read directly on screen.

More information

Written By: Walter Galan

Written By: Walter Galan iphone 4S Logic Board Replacement Replace a dead logic board in your iphone 4S. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION Use this guide to replace your iphone's

More information

Features Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ

Features Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ FTLAB DESCRIPTION Features Solid state sensor : sensitive PIN Photodiode 10pc Sensitivity : 12cpm/μSv/h Measurement Range : 0.01 ~ 200μSv/h Linearity error : ±5% up to 100μSv/h Calibration free Supply

More information

Pair of PMR446 Two-Way Personal Radios Model: TP391

Pair of PMR446 Two-Way Personal Radios Model: TP391 Pair of PMR446 Two-Way Personal Radios Model: TP391 USER MANUAL MANUALE D USO MANUEL DE L UTILISATEUR BEDIENUNGSANLEITUNG MANUAL DE USUARIO MANUAL DO USUÁRIO HANDLEIDING BRUKSANVISNING P/N:086L004722-016

More information

PS4. Ragnarok Flex Modchip Installation Instructions.

PS4. Ragnarok Flex Modchip Installation Instructions. PS4 Ragnarok Flex Modchip Installation Instructions Revised 11/25/2013 Tools needed PS4 Controller Viking PS4 Ragnarok Flex modchip DIY Kit (includes mod chip, LED board, and LED lense) Two diodes (included

More information

Written By: Walter Galan

Written By: Walter Galan iphone 4 Vibrate Ring Switch Replacement Replace the metal portion of the vibrate/ring switch on your iphone 4. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 21 INTRODUCTION Use

More information

MINI-32. development board for PIC32MZ MINI ARM. PIC32 development board fitted in a DIP40 form factor, containing a powerful microcontroller.

MINI-32. development board for PIC32MZ MINI ARM. PIC32 development board fitted in a DIP40 form factor, containing a powerful microcontroller. MINI-32 development board for PIC32MZ PIC32 development board fitted in a DIP40 form factor, containing a powerful microcontroller. MINI ARM TO OUR VALUED CUSTOMERS I want to express my thanks to you for

More information

12kHz LIF Converter V2.43 9Mhz version

12kHz LIF Converter V2.43 9Mhz version 12kHz LIF Converter V2.43 9Mhz version Please Note: This document supersedes all previously released documents and drawings on the LIF subject. This is the latest and most up-to-date document at this time.

More information

Bluetooth Module - Part Code LM-072

Bluetooth Module - Part Code LM-072 Bluetooth Module - Part Code Class 1 BC04 Features Đ Bluetooth Ver. 2.0+EDR certification Đ Transmit Power up to +18(class1) Đ Low current consumption: Hold, Sniff, Park, Deep sleep mode Đ 3.0V to 3.6V

More information

Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N /13

Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N /13 Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N10161454 2012/13 This document provides details on test procedures for SARRRO. It should provide a reference

More information

Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N /13

Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N /13 Test Specification City of Glasgow College HND Electronics Graded Unit Project SARRRO Gavin Hannah N10161454 2012/13 This document provides details on test procedures for SARRRO. It should provide a reference

More information

Eight channel remote relay card. Total solder points: 277 Difficulty level: beginner advanced K8056 ILLUSTRATED ASSEMBLY MANUAL

Eight channel remote relay card. Total solder points: 277 Difficulty level: beginner advanced K8056 ILLUSTRATED ASSEMBLY MANUAL Eight channel remote relay card This relay card can be used in several ways : stand alone card, addressed by switches or open collector outputs or remote controlled through RS232. Total solder points:

More information

INSTRUCTION MANUAL IP REMOTE CONTROL SOFTWARE RS-BA1

INSTRUCTION MANUAL IP REMOTE CONTROL SOFTWARE RS-BA1 INSTRUCTION MANUAL IP REMOTE CONTROL SOFTWARE RS-BA FOREWORD Thank you for purchasing the RS-BA. The RS-BA is designed to remotely control an Icom radio through a network. This instruction manual contains

More information

SRF-T615 SERVICE MANUAL FM STEREO/AM PLL SYNTHESIZED RADIO. Tourist Model. Ver SPECIFICATIONS MICROFILM

SRF-T615 SERVICE MANUAL FM STEREO/AM PLL SYNTHESIZED RADIO. Tourist Model. Ver SPECIFICATIONS MICROFILM SRF-T615 SERVICE MANUAL Ver 1.0 1999.10 Tourist Model SPECIFICATIONS FM STEREO/AM PLL SYNTHESIZED RADIO MICROFILM TABLE OF CONTENTS Specifications... 1 1. GENERAL Location and Function of Controls... 2

More information

File of Breakdown Service of the Welding machine GYSMI 183 SYNOPSYS

File of Breakdown Service of the Welding machine GYSMI 183 SYNOPSYS GYS Welding machine Charger Booster GYSMI 183 Page 1 File of Breakdown Service of the Welding machine GYSMI 183 SYNOPSYS 1) Preliminary analyse and advice on the GYSMI 183 2 1.1) REMINDER ABOUT SAFETY

More information

IQcell TM Technical Specifications

IQcell TM Technical Specifications TECHNICAL SPECIFICATIONS IQcell TM Technical Specifications 2017 LitePoint, A Teradyne Company. All rights reserved. IQcell is a highly-integrated, manufacturing optimized, multi-dut signaling test set,

More information

Ameritron ALS-600 Retrofit ALS-600-LPF Assembly Manual

Ameritron ALS-600 Retrofit ALS-600-LPF Assembly Manual Ameritron ALS-600 Retrofit ALS-600-LPF Assembly Manual FEATURES Automatic band change based on TX frequency. PIN diode QSK RX/TX switch. Temperature controlled FAN for quiet operation. RS-232 serial port

More information

TK6591xM SMALL EL LAMP DRIVER FEATURES APPLICATIONS

TK6591xM SMALL EL LAMP DRIVER FEATURES APPLICATIONS SMALL EL LAMP DRIVER FEATURES High Ratio of Brightness / Input Power Constant Brightness Versus Input Supply Changes Optimized for 3.5 nf to 12.5 nf Panel Capacitance Panel Voltage Slew Rates Controlled

More information

JOINT STOCK COMPANY. MULTICHANNEL RECEIVER RI-4010M (version RM ) User guide

JOINT STOCK COMPANY. MULTICHANNEL RECEIVER RI-4010M (version RM ) User guide JOINT STOCK COMPANY MULTICHANNEL RECEIVER RI-4010M (version RM1-60619) User guide Safety requirements Before using the multichannel receiver RI-4010M read this user guide and follows safety requirements!

More information

SYN113 Datasheet. ( MHz ASK Transmitter) Version 1.0

SYN113 Datasheet. ( MHz ASK Transmitter) Version 1.0 Datasheet (300 450MHz ASK Transmitter) Version 1.0 Contents 1. General Description... 1 2. Features... 1 3. Applications... 1 4. Typical Application... 2 5. Pin Configuration... 2 6. Pin Description...

More information

Iphone 5 Glass/Lcd REPAIR GUIDE. Version Edition

Iphone 5 Glass/Lcd REPAIR GUIDE. Version Edition Iphone 5 Glass/Lcd REPAIR GUIDE Version 1 2016 Edition IPhone 5 Glass/LCd REPAIR GUIDE RiAna Soto Repair Training Specialist rsoto@cellairis.com FOR EVERY REPAIR MAKE SURE TO COMPLETE, INITIAL, AND HAVE

More information

V6.2 SoftRock Lite Builder s Notes. November 17, 2006

V6.2 SoftRock Lite Builder s Notes. November 17, 2006 V6.2 SoftRock Lite Builder s Notes November 17, 2006 Be sure to use a grounded tip soldering iron in building the v6.2 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0.1 inch

More information

MICROGRANNY v2.1 - Assembly Guide

MICROGRANNY v2.1 - Assembly Guide last update: 9. 5. 2017 MICROGRANNY v2.1 - Assembly Guide bastl-instruments.com INTRODUCTION Welcome to the assembly guide for the MicroGranny kit. MicroGranny is a monophonic granular sampler by Bastl

More information

MIPI VGI SM for Sideband GPIO and Messaging Consolidation on Mobile System

MIPI VGI SM for Sideband GPIO and Messaging Consolidation on Mobile System Lalan Mishra Principal Engineer Qualcomm Technologies, Inc. Satwant Singh Sr. Director Lattice Semiconductor MIPI VGI SM for Sideband GPIO and Messaging Consolidation on Mobile System Agenda The Problem

More information

MN8010 GPS Receiver Module

MN8010 GPS Receiver Module 1 Description PRELIMINARY DATA SHEET The Micro Modular Technologies MN8010 Global Positioning System (GPS) Receiver Module is a complete 48-channel receiver with high sensitivity that measures only 10

More information

Time of Arrival Radio Direction Finder.

Time of Arrival Radio Direction Finder. Time of Arrival Radio Direction Finder. Time of arrival (TOA) RDF units are simple and very useful. Various designs have been distributed over the years, and here is another one. This Kit Developed by

More information

L, LTC, LTM, LT are registered trademarks of Linear Technology Corporation. PowerPath

L, LTC, LTM, LT are registered trademarks of Linear Technology Corporation. PowerPath DESCRIPTION WARNING! Do not look directly at operating LED. This circuit produces light that can damage eyes. Demo Circuit 1402 is a Highly Integrated 6-Channel Portable PMIC with a push button controller,

More information

Signal Integrity Design of TSV-Based 3D IC

Signal Integrity Design of TSV-Based 3D IC Signal Integrity Design of TSV-Based 3D IC October 24, 21 Joungho Kim at KAIST joungho@ee.kaist.ac.kr http://tera.kaist.ac.kr 1 Contents 1) Driving Forces of TSV based 3D IC 2) Signal Integrity Issues

More information

DMR Application Note Testing MOTOTRBO Radios On the R8000 Communications System Analyzer

DMR Application Note Testing MOTOTRBO Radios On the R8000 Communications System Analyzer DMR Application Note Testing MOTOTRBO Radios On the R8000 Communications System Analyzer April 2 nd, 2015 MOTOTRBO Professional Digital Two-Way Radio System Motorola and MOTOTRBO is registered in the U.S.

More information

DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output

DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless

More information

1.5MHz, 3A Synchronous Step-Down Regulator

1.5MHz, 3A Synchronous Step-Down Regulator 1.5MHz, 3A Synchronous Step-Down Regulator FP6165 General Description The FP6165 is a high efficiency current mode synchronous buck PWM DC-DC regulator. The internal generated 0.6V precision feedback reference

More information

eguard EG2233, EG3333, EG3355, EG3388 & EG8406: Installation and Set-up Procedures Tx 2200 and Rx 4200 Boards

eguard EG2233, EG3333, EG3355, EG3388 & EG8406: Installation and Set-up Procedures Tx 2200 and Rx 4200 Boards eguard EG2233, EG3333, EG3355, EG3388 & EG8406: Installation and Set-up Procedures Tx 2200 and Rx 4200 Boards A. Primary Technical Data: Transmitter Operating voltage DC 24V Operating current. < 450mA

More information

MiniProg Users Guide and Example Projects

MiniProg Users Guide and Example Projects MiniProg Users Guide and Example Projects Cypress MicroSystems, Inc. 2700 162 nd Street SW, Building D Lynnwood, WA 98037 Phone: 800.669.0557 Fax: 425.787.4641 1 TABLE OF CONTENTS Introduction to MiniProg...

More information

TC-3000C Bluetooth Tester

TC-3000C Bluetooth Tester TC-3000C Bluetooth Tester Product Instructions TC-3000C Bluetooth Tester is able to analyze the data of every packet that is transmitted to the upper application protocol layer using the protocol stack,

More information

SFP-ZX-SM Gbps SFP Optical Transceiver, 80km Reach

SFP-ZX-SM Gbps SFP Optical Transceiver, 80km Reach SFP-ZX-SM-0280 1.25Gbps SFP Optical Transceiver, 80km Reach Features Dual data-rate of 1.25Gbps/1.063Gbps operation 1550nm DFB laser and PIN photodetector for 80km transmission Compliant with SFP MSA and

More information

LED S METER CONSTRUCTION MANUAL. LED S meter Construction Manual Issue 1.0 Page 1

LED S METER CONSTRUCTION MANUAL. LED S meter Construction Manual Issue 1.0 Page 1 LED S METER CONSTRUCTION MANUAL LED S meter Construction Manual Issue 1.0 Page 1 Important Please read before starting assembly STATIC PRECAUTION The LED S Meter kit contains components which can be damaged

More information

Application Note: DMR Application Note Testing MOTOTRBO Radios On the Freedom Communications System Analyzer

Application Note: DMR Application Note Testing MOTOTRBO Radios On the Freedom Communications System Analyzer : DMR Application Note Testing MOTOTRBO Radios On the Freedom Communications System Analyzer MOTOTRBO Professional Digital Two-Way Radio System Motorola and MOTOTRBO is registered in the U.S. Patent and

More information

English RACON SERIES II RADIO CONTROL SERVICE MANUAL

English RACON SERIES II RADIO CONTROL SERVICE MANUAL English 22.2.2007 RACON SERIES II RADIO CONTROL SERVICE MANUAL Read the instructions supplied with the product before installation and commissioning. Keep the instructions in a safe place for future reference.

More information

SoftRock v6.0 Builder s Notes. May 22, 2006

SoftRock v6.0 Builder s Notes. May 22, 2006 SoftRock v6.0 Builder s Notes May 22, 2006 Be sure to use a grounded tip soldering iron in building the v6.0 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0.1 inch diameter),

More information

SMR5000F. User Manual. Smart Radio Data Repeater. Web Site: P.N.: Book 092

SMR5000F. User Manual. Smart Radio Data Repeater. Web Site:  P.N.: Book 092 SMR5000F Smart Radio Data Repeater User Manual ISRAEL Office: Email: info@kpsystems.com PO Box 42, Tefen Industrial Park, Tefen 24959 Tel: 972-4-987-3066 / Fax: 972-4-987-3692 USA Office: KP ELECTRONICS,

More information

SoftRock v6.0 Builder s Notes. April 6, 2006

SoftRock v6.0 Builder s Notes. April 6, 2006 SoftRock v6.0 Builder s Notes April 6, 006 Be sure to use a grounded tip soldering iron in building the v6.0 SoftRock circuit board. The soldering iron needs to have a small tip, (0.05-0. inch diameter),

More information

USERS MANUAL TR-710.

USERS MANUAL TR-710. USERS MANUAL TR-710 www.jotron.com EC Declarations of Conformity, available at www.jotron.com Read this Users Manual fully to familiarise yourself with the equipments functions and facilities. Abbreviations

More information

Supertex inc. HV748DB1 HV748 ±75V 1.25A Ultrasound Pulser Demoboard

Supertex inc. HV748DB1 HV748 ±75V 1.25A Ultrasound Pulser Demoboard HV78DB HV78 ±75V.5A Ultrasound Pulser Demoboard Introduction The HV78 is a monolithic -channel, high speed, high voltage, ultrasound transmitter pulser. This integrated, high performance circuit is in

More information

LX7157B 3V Input, High Frequency, 3A Step-Down Converter Production Datasheet

LX7157B 3V Input, High Frequency, 3A Step-Down Converter Production Datasheet Description LX7157B is a step-down PWM regulator IC with integrated high side P-CH MOSFET and low side N-CH MOSFET. The 2.2MHz switching frequency facilitates small output filter components. The operational

More information

Integrated a/b/g/n/ac WLAN, Bluetooth & BLE Module

Integrated a/b/g/n/ac WLAN, Bluetooth & BLE Module Integrated 802.11 a/b/g/n/ac WLAN, Bluetooth & BLE Module FEATURES IEEE 802.11 a/b/g/n/ac (single stream n) Typical WLAN Transmit Power: o +16 dbm, 11 Mbps, CCK (b) o +13 dbm, 54 Mbps, OFDM (g) o +11 dbm,

More information

Evaluation Driver Board for AT-NPC 3-level 4in1 IGBT module

Evaluation Driver Board for AT-NPC 3-level 4in1 IGBT module Application Note Evaluation Driver Board for AT-NPC 3-level 4in1 IGBT module November 2014 Device application Technology Dept. Semiconductor Div. Sales Group Fuji Electric co.,ltd PRELIMINARY AN-125 ver1.2

More information

Beta-test ED1 PCB installed in I0CG s K1

Beta-test ED1 PCB installed in I0CG s K1 K1 SSB Modification (Ed.2) This description provides the receiver (RX) modifications, assembly, alignment and operation as a first step. In a second step you can add the remaining transmitter (TX) modifications,

More information

Energy Management Energy Analyzer Type EM111

Energy Management Energy Analyzer Type EM111 Energy Management Energy Analyzer Type EM111 Single phase energy analyzer Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Accuracy ±0.5% RDG (current/voltage Direct current measurement

More information

TK6592xM MEDIUM EL LAMP DRIVER FEATURES APPLICATIONS

TK6592xM MEDIUM EL LAMP DRIVER FEATURES APPLICATIONS MEDIUM EL LAMP DRIVER FEATURES High Ratio of Brightness / Input Power Constant Brightness Versus Input Supply Changes Optimized for 9 nf to 27 nf Panel Capacitance Panel Voltage Slew Rates Controlled for

More information

ZILLTEK TECHNOLOGY CORP.

ZILLTEK TECHNOLOGY CORP. ZILLTEK TECHNOLOGY CORP. ZT7103 ZT7103 High Efficiency Step Down DC/DC Converter 5F, No.2, Industry E. 9 th Rd., Science Based Industrial Park, Hsinchu 30075 Taiwan Tel: (886) 3577 7509 Fax: (886) 3577

More information

nrf905-evboard nrf905 Evaluation board PRODUCT SPECIFICATION GENERAL DESCRIPTION

nrf905-evboard nrf905 Evaluation board PRODUCT SPECIFICATION GENERAL DESCRIPTION nrf905 Evaluation board nrf905-evboard GENERAL DESCRIPTION This document describes the nrf905-evboard and its use with the Nordic Semiconductor nrf905 Single Chip 433/868/915MHz RF Transceiver. nrf905-

More information

Application engineering part, Mobile Division Samsung Electronics Co., Ltd.

Application engineering part, Mobile Division Samsung Electronics Co., Ltd. TO DATE : General : Jan. 25, 2013 SAMSUNG TFT-LCD MODEL NO. : LTN156AT19-0 NOTE : Extension code [ - 0xx ] LTN156AT19-0xx Surface type [ A/G ] Any modification of Spec is not allowed without SEC s permission

More information

Analog RF Electronics Education at SDSMT: A Hands-On Method for Teaching Electrical Engineers

Analog RF Electronics Education at SDSMT: A Hands-On Method for Teaching Electrical Engineers Analog RF Electronics Education at : A Hands-On Method for Teaching Electrical Engineers Dr., Professor Department of Electrical and Computer Engineering South Dakota School of Mines and Technology (whites@sdsmt.edu)

More information

1000BASE-T Copper SFP Transceiver

1000BASE-T Copper SFP Transceiver 1000BASE-T Copper SFP Transceiver Features: Operating data rate up to 1.25 Gbps Compact RJ-45 connector assembly Single 3.3V power supply and Low power dissipation Hot Pluggable 1000 BASE-T operation in

More information

RS232-B1 User Manual V1.2 05/10/2017

RS232-B1 User Manual V1.2 05/10/2017 RS232-B1 User Manual V1.2 05/10/2017 Table of Contents 1. Introduction...2 1.1 Device Overview... 2 1.2 System Overview... 3 1.3 Features... 3 1.4 Connectors... 4 1.4.1 RS232 Connectors (J1, J2)... 4 1.4.2

More information

GainMaker Node SMC Status Monitor Transponder Installation Instructions

GainMaker Node SMC Status Monitor Transponder Installation Instructions GainMaker Node SMC Status Monitor Transponder Installation Instructions Overview Introduction The GainMaker Node System Monitoring and Control (SMC) Transponder (part number 744234) is designed to be installed

More information

IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information

IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-340 MODEL: 61-342 Multimeter Service Information The Service Information provides the following information: Precautions and safety information Specifications

More information

Energy Management Energy Meter Type EM340

Energy Management Energy Meter Type EM340 Energy Management Energy Meter Type EM340 Digital input (for tariff management Easy connection or wrong current direction detection Certified according to MID Directive (option PF only: see how to order

More information

Spread-Spectrum Clocking in Switching Regulators to Reduce EMI

Spread-Spectrum Clocking in Switching Regulators to Reduce EMI Spread-Spectrum Clocking in Switching Regulators to Reduce EMI H. Sadamura, T. Daimon, T. Shindo, H. Kobayashi, M. Kono EE Dept. Gunma University, Japan T. Myono, T. Suzuki, S. Kawai, T. Iijima Sanyo Electric

More information

02/11/2015

02/11/2015 Modem communication plug and play solutions GSM Part number 88970119 For remote control of your application Automatic notification of alarms via SMS (GSM Modem) / email or on a PC with M3 ALARM software.

More information

23070 / Digital Camera Owner s Manual

23070 / Digital Camera Owner s Manual 23070 / 23072 Digital Camera Owner s Manual 2007 Sakar International, Inc. All rights reserved. 2007 Crayola Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks

More information

DDS VFO 2 CONSTRUCTION MANUAL. DDS VFO 2 Construction Manual Issue 1 Page 1

DDS VFO 2 CONSTRUCTION MANUAL. DDS VFO 2 Construction Manual Issue 1 Page 1 DDS VFO 2 CONSTRUCTION MANUAL DDS VFO 2 Construction Manual Issue 1 Page 1 Important Please read before starting assembly STATIC PRECAUTION The DDS VFO kit contains the following components which can be

More information

Dual 1.5MHz, 1A Synchronous Step-Down Regulator

Dual 1.5MHz, 1A Synchronous Step-Down Regulator Dual 1.5MHz, 1A Synchronous Step-Down Regulator FP6166 General Description The FP6166 is a high efficiency current mode dual synchronous buck PWM DC-DC regulator. The internal generated 0.6V precision

More information

HF Amateur SSB Receiver

HF Amateur SSB Receiver HF Amateur SSB Receiver PCB Set for radio club project http://rhelectronics.net PCB for DIY HF Amateur SSB Receiver 20M The receiver is a simple syperheterodyne type with quartz crystal filter. The circuit

More information

PAM2306D. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated

PAM2306D. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated DUAL HIGH-EFFICIENCY PWM STEP-DOWN DC-DC CONVERTER Description Pin Assignments The is a dual step-down current mode, DC-DC converter. At heavy load, the constant-frequency PWM control performs excellent

More information

QUICK REFERENCE GUIDE

QUICK REFERENCE GUIDE QUICK REFERENCE GUIDE Installation 1. Install a ground system for DC noise suppression and RFI suppression 2. Install your DC power supply 3. Install lightning protection. This will help protect more than

More information

CBC-EVAL-11. EnerChip CC Inductive Charging Evaluation Kit. Product Discontinued - Not for New Designs

CBC-EVAL-11. EnerChip CC Inductive Charging Evaluation Kit. Product Discontinued - Not for New Designs Product Discontinued - Not for New Designs CBC-EVAL-11 EnerChip CC Inductive Charging Evaluation Kit Overview CBC-EVAL-11 is a demonstration kit combining an inductive transmitter board with a receiver

More information

Si47xx-EVB. Si47XX EVALUATION BOARD USER S GUIDE. 1. Introduction. Table 1. Product Family Function

Si47xx-EVB. Si47XX EVALUATION BOARD USER S GUIDE. 1. Introduction. Table 1. Product Family Function Si47XX EVALUATION BOARD USER S GUIDE 1. Introduction Thank you for purchasing the Silicon Laboratories, Inc. Si47xx Evaluation Board (EVB). The EVB and associated software have been designed to speed up

More information

ICM532A CIF CMOS image sensor with USB output. Data Sheet

ICM532A CIF CMOS image sensor with USB output. Data Sheet ICM532A CIF CMOS image sensor with USB output Data Sheet IC Media Corporation 545 East Brokaw Road San Jose, CA 95112, U.S.A. Phone: (408) 451-8838 Fax: (408) 451-8839 IC Media Technology Corporation 6F,

More information

TS-870: Installing the Inrad Roofing Filter Mod

TS-870: Installing the Inrad Roofing Filter Mod TS-870: Installing the Inrad Roofing Filter Mod The TS-870 roofing filter mod consists of a 6 pole, 4 to 5 khz wide filter followed by a high dynamic range feedback amplifier. The amplifier provides enough

More information

BROADBAND PREAMPLIFIER MODEL BPA khz 1 GHz

BROADBAND PREAMPLIFIER MODEL BPA khz 1 GHz INSTRUCTION MANUAL BROADBAND PREAMPLIFIER MODEL BPA-1000 10 khz 1 GHz INSTRUCTION MANUAL THIS INSTRUCTION MANUAL AND ITS ASSOCIATED INFORMATION IS PROPRIETARY. UNAUTHORIZED REPRODUCTION IS FORBIDDEN. 1994

More information

Connecting a Neuron 5000 Processor to an External Transceiver

Connecting a Neuron 5000 Processor to an External Transceiver @ Connecting a Neuron 5000 Processor to an External Transceiver March 00 LonWorks Engineering Bulletin The Echelon Neuron 5000 Processor provides a media-independent communications port that can be configured

More information

WS-29 DUAL CHANNEL WIRELESS BELTPACK

WS-29 DUAL CHANNEL WIRELESS BELTPACK WS-29 DUAL CHANNEL WIRELESS BELTPACK USER MANUAL Issue March 2011 ASL Intercom BV DESIGNED AND MANUFACTURED BY: ASL INTERCOM BV ZONNEBAAN 42 3542 EG UTRECHT THE NETHERLANDS PHONE: +31 (0)30 2411901 FAX:

More information

N3ZI Kits General Coverage Receiver, Assembly & Operations Manual (For Jun 2011 PCB ) Version 3.33, Jan 2012

N3ZI Kits General Coverage Receiver, Assembly & Operations Manual (For Jun 2011 PCB ) Version 3.33, Jan 2012 N3ZI Kits General Coverage Receiver, Assembly & Operations Manual (For Jun 2011 PCB ) Version 3.33, Jan 2012 Thank you for purchasing my general coverage receiver kit. You can use the photo above as a

More information

2016 SIGLENT TECHNOLOGIES CO., LT

2016 SIGLENT TECHNOLOGIES CO., LT Service Manual SDM3055 Series Digital Mulimeter SM06035-E01A 2016 SIGLENT TECHNOLOGIES CO., LT Guaranty and Declaration Copyright SIGLENT TECHNOLOGIES CO., LTD All Rights Reserved. Trademark Information

More information

G+ Mini Transition Guide. Product Transition Guide P3 Series 2 to G+ Mini

G+ Mini Transition Guide. Product Transition Guide P3 Series 2 to G+ Mini Transition Guide Product Transition Guide to Rev: Page Intentionally Left Blank Transition Guide September 2008 Page 2 of 24 Table of Contents 1.1 Overview...4 1.2 Drive Replacement Checklist...4 1.3 Ratings

More information

Step by Step Building PJ meter ARDF Receiver Kit. CRKITS.COM August 5, 2013

Step by Step Building PJ meter ARDF Receiver Kit. CRKITS.COM August 5, 2013 Step by Step Building PJ-80 80-meter ARDF Receiver Kit CRKITS.COM August 5, 2013 What is ARDF? ARDF is the abbreviation of Amateur Radio Direction Finding, or so called Fox Hunting. If you are looking

More information

RP3600 Series Field Programming Manual

RP3600 Series Field Programming Manual Preliminary RP3600 Series Field Programming Manual P/N FLDPRGMANRP36 Ref. # 0301-309XX-XXX Rev. 06-05 GENERAL INFORMATION Introduction This manual contains information about field programming through

More information

PRODUCTION DATA SHEET

PRODUCTION DATA SHEET The is a step down buck regulator with a synchronous rectifier. All MOSFET switches and compensation components are built in. The synchronous rectification eliminates the need of an external Schottky diode

More information

PG Interface Card "OPC-E2-PG"

PG Interface Card OPC-E2-PG Instruction Manual PG Interface Card "OPC-E2-PG" Thank you for purchasing this PG interface card "OPC-E2-PG." Installing this card to your inverter enables speed control with speed sensor and pulse train

More information

IS31BL3228A/B WHITE LED DRIVER. January 2016

IS31BL3228A/B WHITE LED DRIVER. January 2016 WHITE LED DRIVER January 2016 GENERAL DESCRIPTION The IS31BL3228A (IS31BL3228B) is a low noise, constant frequency charge pump DC/DC converter for white LED applications. The IS31BL3228A (IS31BL3228B)

More information

FCOPPER-SFP BASE-TX Copper SFP Transceiver

FCOPPER-SFP BASE-TX Copper SFP Transceiver 100BASE-TX Copper SFP Transceiver March 27, 2012 Product Overview The electrical Small Form Factor Pluggable (SFP) transceiver module is specifically designed for converting 100BASE-FX NRZI port interface

More information

Energy Management Energy Meter Type EM111

Energy Management Energy Meter Type EM111 Energy Management Energy Meter Type EM111 Easy connection or wrong current direction detection Other versions available (not certified, option X: see how to order on the next page Single phase energy meter

More information

An Integrated, Dynamically Adaptive Energy-Management Framework for Linear RF Power Amplifiers

An Integrated, Dynamically Adaptive Energy-Management Framework for Linear RF Power Amplifiers An Integrated, Dynamically Adaptive Energy-Management Framework for Linear RF Power Amplifiers Georgia Tech Analog Consortium Biranchinath Sahu Advisor: Prof. Gabriel A. Rincón-Mora Georgia Tech Analog

More information

FT-897 Alignment. Local Oscillator Adjustment. PLL Adjustment

FT-897 Alignment. Local Oscillator Adjustment. PLL Adjustment FT-897 Local Oscillator Adjustment Reference Frequency Adjustment a. Connect a frequency counter to TP1032. b. Adjust the trimmer capacitor (TC5001) for 67.875000MHz ±5Hz on the frequency counter. c. Connect

More information

3.3V regulator. JA H-bridge. Doc: page 1 of 7

3.3V regulator. JA H-bridge. Doc: page 1 of 7 Cerebot Reference Manual Revision: February 9, 2009 Note: This document applies to REV B-E of the board. www.digilentinc.com 215 E Main Suite D Pullman, WA 99163 (509) 334 6306 Voice and Fax Overview The

More information

The Price Performance Leader in 100% Compatible Optical Transceivers GBIC-GE-S40K Part Number: GBIC-GE-S40K PRODUCT FEATURES APPLICATIONS

The Price Performance Leader in 100% Compatible Optical Transceivers GBIC-GE-S40K Part Number: GBIC-GE-S40K PRODUCT FEATURES APPLICATIONS Part Number: GBIC-GE-S40K Quick Spec: Manufacturer Compatibility: Form Factor: TX Wavelength: Reach: Cable Type: Rate Category: Interface Type: Digital Optical Mon. (DOM): Connector Type: PRODUCT FEATURES

More information

Cricket 80a Assembly Manual v Copyright David Cripe NM0S The 4 State QRP Group

Cricket 80a Assembly Manual v Copyright David Cripe NM0S The 4 State QRP Group Cricket 80a Assembly Manual v. 1.0 Copyright 2017 David Cripe NM0S The 4 State QRP Group Introduction Thank you for purchasing a CRICKET 80a Transceiver. We hope you will enjoy building it and find it

More information

FSBB30CH60DF. Motion SPM 3 Series. FSBB30CH60DF Motion SPM 3 Series. Features. General Description. Applications.

FSBB30CH60DF. Motion SPM 3 Series. FSBB30CH60DF Motion SPM 3 Series. Features. General Description. Applications. FSBB30CH60DF Motion SPM 3 Series Features UL Certified No. E209204 (UL1557) 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection Low-Loss, Short-Circuit Rated IGBTs Very Low Thermal

More information

LM-071 Page Number : 1 of 6. Bluetooth Module Part Code LM-071 Class 2 BC04. Features. General Electrical Specification. Block Diagram RF_I O

LM-071 Page Number : 1 of 6. Bluetooth Module Part Code LM-071 Class 2 BC04. Features. General Electrical Specification. Block Diagram RF_I O Bluetooth Module Part Code Class 2 BC04 Features Đ The module is a Max.4( Class2 ) module. Đ Đ Low current consumption : Hold,Sniff,Park,Deep sleep Mode Đ 3.0v to 3.6v operation Đ S upport for up to 7

More information

IC-781: Installing the Inrad Roofing Filter Mod

IC-781: Installing the Inrad Roofing Filter Mod IC-781: Installing the Inrad Roofing Filter Mod The Icom IC-781 roofing filter mod consists of a 6-pole, 4 to 5 khz wide filter followed by a high dynamic range, feedback amplifier. The amplifier provides

More information

KENWOOD SKY COMMAND SYSTEM

KENWOOD SKY COMMAND SYSTEM KENWOOD SKY COMMAND SYSTEM Operation Manual KENWOOD COMMINICATIONS CORPORATION KENWOOD COMMUNICATIONS CORPORATION This operation manual is used for the KENWOOD SKY COMMAND SYSTEM (hereinafter referred

More information

Ocean Controls KT-5221 Modbus IO Module

Ocean Controls KT-5221 Modbus IO Module Ocean Controls Modbus IO Module 8 Relay Outputs 4 Opto-Isolated Inputs 2 Analog Inputs (10 bit) 1 PWM Output (10 bit) 4 Input Counters Connections via Pluggable Screw Terminals 0-5V or 0-20mA Analog Inputs,

More information

SPECS FEATURES SUPPLIED ACCESSORIES. HF All Band Transceiver

SPECS FEATURES SUPPLIED ACCESSORIES. HF All Band Transceiver 718 HF All Band Transceiver RX 0.030-29.999999MHz* TX 1.800-1.999999 MHz** 3.500-3.999999 MHz** 7.000-7.300000 MHz 10.100-10.150000 MHz 14.000-14.350000 MHz 18.068-18.168000 MHz 21.000-21.450000 MHz 24.890-24.990000

More information

Advanced RTK GPS / Compass module with 100x100 mm ground plane and 32-bit MCU

Advanced RTK GPS / Compass module with 100x100 mm ground plane and 32-bit MCU TGM100 Advanced RTK GPS / Compass module with 100x100 mm ground plane and 32-bit MCU Data Sheet Revision: 0.3 Date of Last Revision: 18 April 2017 True Flight Technology, Inc. ( TFT ) reserves the right

More information

DEMO MANUAL DC573A LTC Bit Micropower No Latency Delta Sigma ADC DESCRIPTION BOARD PHOTO

DEMO MANUAL DC573A LTC Bit Micropower No Latency Delta Sigma ADC DESCRIPTION BOARD PHOTO DESCRIPTION This demonstration board features the LTC 00, a -bit high performance ΔΣ analog-to-digital converter (ADC). The LTC00 combines exemplary DC accuracy (INL ±ppm,.μv offset, 0.ppm noise) with

More information

TK-931 Receiver Modifications

TK-931 Receiver Modifications TK-931 Receiver Modifications This page identifies all the hardware modifications necessary to adapt a Kenwood TK-931 transceiver for 902 MHz repeater receive operation. Not shown here is the effort required

More information