Attenuators are available as - in-line types - plug types
|
|
|
- Nancy Greene
- 6 years ago
- Views:
Transcription
1 In-line attenuators Applications - Telecommunication Networks and CATV Networks - Data Communication Networks Instrumentation - Test equipment introduce a loss of optical power in order to reduce the source power to an acceptable detection level. The attenuation level is stable with temperature and wavelength. are available as - in-line types - plug types Key eatures - Optical performance 100% factory tested - Stable attenuation - High return loss - Compact and light weight In-line attenuator L = 0,5 ~ 4 m Parameter Bandwith Return Loss Tolerance Short term tensile load Long term tensile load Short term crush load Long term crush load Dynamic bend radius Static bend radius Capsulation tensile load Optic cable Specification 1310nm or 1550nm +-20 nm >40 db Customer specific, typical 1 db 150 N 80 N 500 N/mm 100 N/mm 20D 10D > 3 kg Simplex SM 3mm easystrip LSZH In-line attenuator 1310 / 1550 nm EC xx In-line attenuator 1310 nm EC xx In-line attenuator 1550 nm EC xx xx specifies the attenuation e.g. EC for 15dB Standard length = 1m, other lengths on request Standard tolerance = 1dB, other tolerances on request Termination with SC, C, ST, LC, MU connectors on request w w w. e u r o c l u s t. b i z 1.17
2 SC fixed type attenuator 1 ~20 db ±0,5dB (for 1 9 db) SC/PC fixed type attenuator 1310/1550nm EC xx SC/PC fixed type attenuator 1310nm EC xx SC/PC fixed type attenuator 1550nm EC xx SC/PC fixed type attenuator 850/1310nm EC xx SC/UPC fixed type attenuator 1310/1550nm EC xx SC/UPC fixed type attenuator 1310nm EC xx SC/UPC fixed type attenuator 1550nm EC xx SC/UPC fixed type attenuator 850/1310nm EC xx SC/APC fixed type attenuator 1310/1550nm EC xx SC/APC fixed type attenuator 1310nm EC xx SC/APC fixed type attenuator 1550nm EC xx SC/APC fixed type attenuator 850/1310nm EC xx xx specifies the attenuation e.g. EC for 15dB 1.18 w w w. e u r o c l u s t. b i z
3 C fixed type attenuator ±0,5dB (for 1 9 db) C/PC fixed type attenuator 1310/1550nm EC xx C/PC fixed type attenuator 1310nm EC xx C/PC fixed type attenuator 1550nm EC xx C/PC fixed type attenuator 850/1310nm EC xx C/UPC fixed type attenuator 1310/1550nm EC xx C/UPC fixed type attenuator 1310nm EC xx C/UPC fixed type attenuator 1550nm EC xx C/UPC fixed type attenuator 850/1310nm EC xx C/APC fixed type attenuator 1310/1550nm EC xx C/APC fixed type attenuator 1310nm EC xx C/APC fixed type attenuator 1550nm EC xx C/APC fixed type attenuator 850/1310nm EC xx xx specifies the attenuation e.g. EC for 15dB w w w. e u r o c l u s t. b i z 1.19
4 ST fixed type attenuator ±0,5dB (for 1 9dB) ST/PC fixed type attenuator 1310/1550nm EC xx ST/PC fixed type attenuator 1310nm EC xx ST/PC fixed type attenuator 1550nm EC xx ST/PC fixed type attenuator 850/1310nm EC xx ST/UPC fixed type attenuator 1310/1550nm EC xx ST/UPC fixed type attenuator 1310nm EC xx ST/UPC fixed type attenuator 1550nm EC xx ST/UPC fixed type attenuator 850/1310nm EC xx ST/APC fixed type attenuator 1310/1550nm EC xx ST/APC fixed type attenuator 1310nm EC xx ST/APC fixed type attenuator 1550nm EC xx ST/APC fixed type attenuator 850/1310nm EC xx xx specifies the attenuation e.g. EC for 15dB 1.20 w w w. e u r o c l u s t. b i z
5 LC fixed type attenuator >45 / 55 / 65 db ±0,5dB (for 1 9dB) LC/PC fixed type attenuator 1310/1550nm EC xx LC/PC fixed type attenuator 1310nm EC xx LC/PC fixed type attenuator 1550nm EC xx LC/PC fixed type attenuator 850/1310nm EC xx LC/UPC fixed type attenuator 1310/1550nm EC xx LC/UPC fixed type attenuator 1310nm EC xx LC/UPC fixed type attenuator 1550nm EC xx LC/UPC fixed type attenuator 850/1310nm EC xx LC/APC fixed type attenuator 1310/1550nm EC xx LC/APC fixed type attenuator 1310nm EC xx LC/APC fixed type attenuator 1550nm EC xx LC/APC fixed type attenuator 850/1310nm EC xx xx specifies the attenuation e.g. EC for 15dB w w w. e u r o c l u s t. b i z 1.21
6 MU fixed type attenuator ±0,75dB (for 1 5dB) ±0,9dB (for 6dB) ±1,05dB (for 7dB) ±1.5dB (for 10dB) ±1.8dB (for 12dB) ±2.25dB (for 15dB) ±2.7dB (for 18dB) ±3.0dB (for 20dB) MU/PC fixed type attenuator 1310/1550nm EC xx MU/PC fixed type attenuator 1310nm EC xx MU/PC fixed type attenuator 1550nm EC xx MU/PC fixed type attenuator 850/1310nm EC xx MU/UPC fixed type attenuator 1310/1550nm EC xx MU/UPC fixed type attenuator 1310nm EC xx MU/UPC fixed type attenuator 1550nm EC xx MU/UPC fixed type attenuator 850/1310nm EC xx MU/APC fixed type attenuator 1310/1550nm EC xx MU/APC fixed type attenuator 1310nm EC xx MU/APC fixed type attenuator 1550nm EC xx MU/APC fixed type attenuator 850/1310nm EC xx xx specifies the attenuation e.g. EC for 15dB 1.22 w w w. e u r o c l u s t. b i z
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE FUSED WDM FILTER MODULE TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Fused WDM Filter Module Fused WDM Filter Module (Fused Biconical Taper
/ On the web: / Telephone: IS-FIBER (800)
Fixed Attenuators Bulkhead Attenuators 68 Series Bulkhead / Feedthru Attenuators provide an economical solution for applications that do not require low back reflection yet will maintain repeatable performance.
Multi Fiber Cable Assemblies
Multi Fiber Cable Assemblies Pre-terminated cable assemblies made your way Multi Fiber Cable Assemblies PRODUCT OVERVIEW Factory installed connectors! Pre-terminated cable assemblies make installation
CWDM. DATA SHEET DB4133-E Issue L Page 1 of 8
CWDM DATA SHEET DB4133-E Issue L Page 1 of 8 Passive optical multiplexer/de-multiplexer. Increases the capacity of existing networks by transferring several wavelengths on the same fibre. Independent of
M-FP ISOLATOR PIGTAILS
M-FP ISOLATOR PIGTAILS Ultra high isolation Minimum polarization dependent loss (PDL) Optical path epoxy free Low insertion loss Environmentally stable Optical amplification Optical transmission CATV High-bit
Polarization Beam Combiner / Splitter
Polarization Beam Combiner / Splitter The polarization beam combiner /splitter is a compact lightwave component that combines two orthogonal polarization signals into the output fiber. This device has
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE CWDM Module TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com CWDM Module CWDM modules (Coarse Wave Division Multiplexing) combine or split up
Fixed Attenuators. Features and Benefits. Standards
Features and Benefits Standard Fixed Attenuation Values of db up to 30 db Precision Polishing for Reduced Back Reflection Available in a Variety of Connector Types Polarization Insensitive Standards RoHS
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE DWDM Module TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com DWDM Module The DWDM Modules combine or split particular wavelengths into a single
MEMS Variable Optical Attenuator (VOA)
MEMS Variable Optical Attenuator (VOA) (patents pending) Broad band Low IL, PDL, WDL & TDL Power Regulate 01-18-13 Product Description The BM Series VOA is based on a proprietary micro-electro-mechanical
WaveSmart Wave Division Multiplexing (WDM)
Application These products are needed when a passive multiplexing or demultiplexing unit is required in a central office environment. They are used in CATV headends and telephone company central offices.
Multi Fiber Cable Assemblies
Multi Fiber Cable Assemblies Pre-terminated cable assemblies made your way 1 Multi Fiber Cable Assemblies PODUCT OVEVIEW Factory installed connectors! Pre-terminated cable assemblies make installation
Table of Contents. Cable Assemblies & Backplane Interconnects. Fiber Optic Products Catalog. Cable Assemblies &
Table of Contents Cable Assemblies NEW Active Optical Cable Assemblies....................... 100, 101 LC Cable Assemblies....................................... 10-104 SECURE Cable Assemblies...................................
FIBER OPTIC CABLE ASSEMBLIES
FIBER OPTIC CABLE ASSEMBLIES QUALITY CONNECTIONS START HERE Improve the quality of your connections with America Ilsintech s line of SM & MM SC, ST, LC and MPO/MTP cable assemblies. America Ilsintech manufactures
Data Center & Cloud Computing DATASHEET. 100 GHz DWDM Passive Optical Add/Drop Multiplexers Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET 100 GHz DWDM Passive Optical Add/Drop Multiplexers Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 100 GHz DWDM Passive Optical Add/Drop Multiplexers
Cabling, FP PRO-series
Cabling, FP PRO-series DATA SHEET DB4164-E Issue F Page 1 of 10 The FP PRO-series includes several panels for termination of optical fibre. A good selection of accessories facilitates fast and safe administration
Coaxial Analog PIN Detector Module with Pigtail
Coaxial Analog PIN Detector Module with Pigtail Description LH1xxx series are high responsibility and high linearity PIN photodiodes. The products features: Low capacitance, low dark current and high optical
Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking for more information? Visit us on the web at http://www.artisan-scientific.com for more information: Price Quotations Drivers Technical Specifications. Manuals and Documentation Artisan Scientific
The COH24-X and COH28-X also feature a phase tunability option in order to perfectly adjust the 90 of the hybrid depending on the wavelength used.
w w w. k y l i a. c o m i n f o @ k y l i a. c o m 90 optical hybrids COH 1 Description The COH24 is a single polarization 90 optical hybrid that enables to extract phase and amplitude from a single polarization
VARIABLE FIBER OPTIC ATTENUATORS BLOCKING PIGTAIL STYLE
VARIABLE FIBER OPTIC ATTENUATORS BLOCKING PIGTAIL STYLE Features: Rugged and compact size Wide wavelength range (from 350 to 2050nm) Singlemode, polarization maintaining and multimode fiber versions Low
Variable Optical Delay Line
Variable Optical Delay Line w w w. k y l i a. c o m i n f o @ k y l i a. c o m VODL 1 Description The Variable Optical Delay Line (VODL) is a device that enables a very precise and stable control of an
IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC,
F IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC, LC/UPC) 1. GENERAL This specification covers the requirements of the standard attenuator for single mode optical fiber to be supplied to TOT Public Company Limited
Odd. Even. Insertion Loss (db)
Optical Interleavers Optoplex s Optical Interleaver products are based on our patented Step-Phase Interferometer design. Used as a DeMux (or Mux) device, an optical interleaver separates (or combines)
About KOC Group. Please visit us website for more informations :
About KOC Group Located in Shenzhen, China, KOC Group is specialized in fiber optic communication products and accessories. She offers precise customized solutions for various customers involved in telecommunication,
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL FILTER TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Optical Filter The Optical Filter is used for selecting one wavelength light
THE BEST SOLUTION FOR TELECOMMUNICATIONS DISTRIBUTION
THE BEST SOLUTION FOR TELECOMMUNICATIONS DISTRIBUTION 20 VDI_RACK D90 ENCLOSURES 20 VDI_RACK D90 PANELS 21 VDI_RACK D12 and D200 ENCLOSURES 22 VDI_RACK D12 and D200 PANELS 23 ACCESSORIES network solutions
CONTENTS. Introduction Characteristics Product range Pages
OSIS tm Series OSIS CONTENTS OSIS TM Pages Introduction...10-4 Characteristics...10-5 Product range...10-6 OSIS TM plug kit...10-6 OSIS TM receptacle...10-7 OSIS TM pre-mounted optical cable assemblies...10-8
7820R Optical Receiver MHz RFoG Return Path
The 7820R RFoG return path optical receiver is a single-mode fiber pigtailed module featuring a low-noise, impedance-matched broadband photodiode and RF amplification. The device receives optical analog
FUSED COUPLER C OR L BAND
Fused Fiber Coupler DATASHEET The fused coupler, C or L band enables the accurate splitting and monitoring of optical signals in single-mode fiber. Gooch & Housego proprietary manufacturing technology
Nufern 980 nm Select Cut-Off Single-Mode Fiber
Nufern 980 nm Select Cut-Off Single-Mode Fiber Nufern s 980 nm high-performance select cut-off single-mode fibers are optimized for use by component manufacturers in the telecommunications wavelengths.
Tel:
sapphire window, dia 20x6mm, poilshed Polarization Insensitive Fiber Isolator (Single Stage) Features: Epoxy-free Optical Path Low Insertion Loss & PDL High Isolation Wide Operating Wavelength Range
FOT-920. Automated Loss Test Set. Fiber-optic test and measurement equipment. Fast automated bidirectional loss testing. FasTesT-compatible
FOT-920 Automated Loss Test Set Fast automated bidirectional loss testing FasTesT-compatible Optical return loss testing Simultaneously talk, test, and locate Complete test documentation Fiber-optic test
Keysight 8160xx Series Tunable Laser Family. User s Guide
Keysight 8160xx Series Tunable Laser Family User s Guide Notices Keysight Technologies 2017 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval
Standard/Compact Tap Photo Detector
FEATURES: Low Dark Current Low Insertion Loss Broad Wavelength Range Excellent Thermal Stability Low Wavelength Dependent Loss Telcordia GR-468-CORE Compliant APPLICATIONS: DWDM Channel Monitoring EDFA
Product Bulletin. 2 mw WDM Laser for Direct Modulation in Links up to 100 km CQF915/108 Series
Product Bulletin 15/108-19 927 70 2 mw WDM Laser for Direct Modulation in Links up to 100 km CQF915/108 Series The JDS Uniphase CQF915/108 is a low power, directly modulated laser source in a butterfly
User Manual. Portable C-band 26dB-gain EDFA Instrument in compact benchtop. (EDFA-C-26G-S, version 1.0b. January 28, 2015) Fiberprime, Inc.
User s Fiberprime, Inc. www.fiberprime.com Tel: 1-613-5964030 Email: info@fiberprime.com Fax: 1-613-8289398 User Manual Portable C-band 26dB-gain EDFA Instrument in compact benchtop (EDFA-C-26G-S, version
HES HACILAR ELEKTRİK SANAYİ VE TİC.A.Ş.
Technical Specification Revision/Date:01/02.15 By S.Erol Date : 27 February 2015 Cable Type HES Cable Product Number :, Outdoor F/O Cable :FOZZXXXSLT41DYY (ZZ: fiber type G652=SD, G657 A1 = A1, G657 A2
4,8,9 and 10-Channel Tap Photo Detector Array
FEATURES: Low Dark Current Low Insertion Loss Broad Wavelength Range Excellent Thermal Stability Low Wavelength Dependent Loss Telcordia GR-468-CORE Compliant APPLICATIONS: DWDM Channel Monitoring EDFA
Uncooled DFB-LD Coaxial Module with Single-mode fiber for Analog Communication Customized Specifications
Uncooled DFB-LD Coaxial Module with Single-mode fiber for Analog Communication Customized Specifications Part Number : HLS4 21-SUC 1310/1470/1490/1510/1530/1550/1570/1590/1610 nm OPTICAL SUB-ASSEMBLY FAB.
Prisma II Optical Receivers
Optoelectronics Prisma II Optical s Description The Prisma II optical network is an advanced transmission system designed to optimize network architectures and increase reliability, scalability, and cost
ADSS Fiber Optic Cable. DESCRIPTION core, Single-mode/Multi-mode. Version: V2.0
ITEM MODEL NO. ADSS Fiber Optic Cable A-288-XX DESCRIPTION 2-288 core, Single-mode/Multi-mode Overview AOA-ADSS cable is ideal for installation in distribution as well as transmission environments, even
LASER DIODE SOURCE FIBER OPTIC (SINGLE OR MULTI-WAVELENGTH)
LASER DIODE SOURCE FIBER OPTIC (SINGLE OR MULTI-WAVELENGTH) Features: Single or multi-wavelength sources available Continuous wave (CW) and waveform modulation Wide range of connector receptacles available
Implicitly underatanding team work cooperation Cooperating closely with group team spirit "many feathers make a bed" to accomplish the synergy.
FOCI MANAGEMENT PRINCIPLE Honest and trust management philosophy Carrying out pledges in handling matters and being honest in facing customers and staffs. Requesting the quality level demanded by the customers
CXE880 FIBRE OPTIC NODE
Kari Mäki 8.1.2008 1(5) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,
Why Using Fiber for transmission
Why Using Fiber for transmission Why Using Fiber for transmission Optical fibers are widely used in fiber-optic communications, where they permit transmission over long distances and at very high bandwidths.
FTTH Fiber Optical Cable
FTTH Fiber Optical Cable FTTH Drop Cables are designed to connect the fiber access point to the ONT on the home in a FTTH network. It offers an efficient and economical solution for deploying fiber in
GainMaker Optoelectronic Node 1 GHz with 40/52 MHz Split and RF Redundancy
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 40/52 MHz Split and RF Redundancy Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network
Optical Passives (ISP)
arris.com Optical Passives (ISP) DP35Dxx 8, 10, 20, and 40-channel ISP DWDM Demuxes FEATURES 8-, 10-, 20-, and 40-channel optical de-multiplexer modules Indoor demux companions to ARRIS s outdoor DP95M
CXE880 FIBRE OPTIC NODE
Kari Mäki 21.4.2011 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,
Type QG-G50-2C- M-BU
Page 1/6 Specification for Optical Fiber Cable Assemblies for CC-Link IE Controller network Type QG-G50-2C- M-BU MITSUBISHI ELECTRIC SYSTEM & SERVICE CO.,LTD Note Revision Drawn Check Design Approved Kariya
VOAPXIe Variable Optical Attenuator PRELIMINARY SPEC SHEET
1002 Variable Optical Attenuator PRELIMINARY SPEC SHEET The builtin power meter and power stabilization function lets you set and maintain the output power stability even when the input power fluctuates.
DNV-GL approved products for Shipbuilding Industry
DNV-GL approved products for Shipbuilding Industry Content What's inside? RJ45 Connectivity 4 Cat 6 A modules and patch cords 4 Cat 6 modules and patch cords 5 Cat 5 modules and patch cords 6 Twisted
GainMaker High Output Node 5-40/ MHz
Optoelectronics GainMaker High Output Node 5-40/52-1002 MHz Description The GainMaker High Output Node is designed to serve as an integral part of today s network architectures, and combines the superior
GainMaker 1 GHz High Output 4-Port Node with 40/52 MHz Split
Data Sheet GainMaker 1 GHz High Output 4-Port Node with 40/52 MHz Split The Cisco GainMaker High Output 4-Port Node with 40/52 MHz Split is designed to serve as an integral part of today s network architectures.
Headend Optics Platform (CH3000)
arris.com Headend Optics Platform (CH3000) HT3580H Series Quad-Density Full Spectrum DWDM Transmitter System FEATURES DWDM transmitter: up to 16 wavelengths on ITU grid Hot plug-in/out, individually replaceable
ModBox-CBand-10Gb/s-MultiFormats C-Band, Multi-formats 10 Gb/s Optical Reference Transmitter
The is an Optical Reference Transmitter that generates excellent quality optical data streams up to 10 Gb/s in the C & L Bands. The equipment incorporates two LiNbO 3 modulators (a pulse carver combined
Couplers, WDMs Fiber optic couplers
Couplers, WDMs Fiber optic couplers are devices used in optical fiber systems with one or more input fibers and one or several output fibers. Light entering an input fiber can appear at one or more outputs
1310nm FP TX/1550nm RX PD 1.5GHz CATV Transmission. HERPD31xx510MSAxx. Features: Applications: Absolute Maximum Ratings: Coaxial Package
1310nm FP TX/1550nm RX PD 1.5GHz CATV Transmission HERPD31xx510MSAxx Features: Coaxial Package InGaAsP/InP MQW-FP Laser Diode Low threshold, high slope efficiency and high output power Operating Case Temperature:
COMPACT Diode Laser System (Water-Cooled)
COMPACT Diode Laser System (Water-Cooled) Easy-to-integrate CW system consists of a compact 19 (11HU including water-air-chiller), rack-mountable chassis and metal-armored fiber. Can be combined with DILAS
TURNKEY, ULTRA STABLE, OEM LASER DIODE SOURCE OZ-1000 & OZ-2000 SERIES
29 Westbrook Rd, Ottawa, ON, Canada, K0A L0 Toll Free: -800-36-4 Tel:(63) 83-098 Fax:(63) 836-089 E-mail: sales@ozoptics.com TURNKEY, ULTRA STABLE, OEM LASER DIODE SOURCE OZ-00 & OZ-2000 SERIES Features:
GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The
ML-COAX-X-DFB-2G5-X-X-2. CWDM COAXIAL FIBER PIGTAILED DFB LASER FOR 2.5 Gb/s DFB DIGITAL APPLICATIONS
Document type: Document number: Version: Product specification TBD 1.1 Document name: ML-COAX-X-DFB-2G5-X-X-2 PRODUCT SPECIFICATION Author: Reviewer: Approver: Release date: Pages: Torka Sippe Sippe 03-Mar-2006
Cisco Prisma Optical Passive Components
Data Sheet Cisco Prisma Optical Passive Components This data sheet includes optical wavelength filters, multiplexers, and demultiplexers that operate in the C-band from 1525 to 1565 nm as well as band
7820C CATV Optical Receiver 200 MHz HFC Return Path
The 7820C optical receiver is a single-mode fiber pigtailed module featuring a low-noise, impedance-matched broadband photodiode and RF amplification. The device receives optical analog and/or digital
PL 63/65/67 Visible Series Laser Diode Modules
PD-LD Inc. offers a variety of packaging options for its Visible Series of laser diodes. These units are available in ready-to-use, fiber-coupled packages, including FC, ST, and SC receptacles, as well
features and benefits
features and benefits Fully waterblocked loose tube, gel-free design Medium-density polyethylene jacket Figure-8 cable design Available in 62.5 µm, 50 µm, single-mode and hybrid versions Simple access
DIGITAL VARIABLE ATTENUATOR
219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-5415 Tel:(613) 831-0981 Fax:(613) 836-5089 E-mail: sales@ozoptics.com Features: CE Compliant High power handling (up to 2 watts) High
LASER DIODE SOURCE FIBER OPTIC (SINGLE OR MULTI-WAVELENGTH)
219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-5415 Tel:(613) 831-0981 Fax:(613) 836-5089 E-mail: sales@ozoptics.com LASER DIODE SOURCE FIBER OPTIC (SINGLE OR MULTI-WAVELENGTH) Features:
GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split
Optoelectronics GainMaker Optoelectronic Node 1 GHz with 42/54 MHz Split Description The GainMaker Node is designed to serve as the cornerstone of today s emerging fiber deeper network architectures. The
POLARIZATION EXTINCTION RATIO METER
219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-5415 Tel:(613) 831-0981 Fax:(613) 836-5089 E-mail: sales@ozoptics.com POLARIZATION EXTINCTION RATIO METER Features: Measures up to 40dB
TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Duct Application
TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Duct Application (SM 24, 36, 48, 64, 96 Fibers) Product: Single Mode Optical Fiber Cable Producer: XCOM L TD. / Bulgaira Date: August 1, 2012 Write
Overview SUCOFLEX 400
Overview SUCOFLEX 4 The low loss benchmark Product description The SUCOFLEX 4 microwave assembly family has been specifically developed for high performance defense, medical, test and measurement technology
Optical Passives and Accessories
Optical Passives and ccessories Full line of optical passives and accessories High stability High reliability C-COR offers a complete line of DWDMs, CWDMs, WDMs, Couplers, and an Optical Shelf. Optical
Q-SERIES. Optical. QFQR 200A-04 Series Return Path Optical Receiver. Installation & Operation Manual
Q-SERIES Optical QFQR 200A-04 Series Return Path Optical Receiver Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without
CXE880 FIBRE OPTIC NODE
Kari Mäki 4.3.2008 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,
Delay Line Interferometers
w w w. k y l i a. c o m i n f o @ k y l i a. c o m Delay ine Interferometers MINT and WT-MINT 1 Description p1 2 Block diagrams.. p2 3 Absolute maximum ratings p3 4 Operating conditions. p3 5 MINT specifications
SPINNER RADAR & SATELLITE
Edition B 2012 ONLINE UPDATE High Frequency Performance Worldwide www.spinner-group.com On our website you will find our latest updates. As your contribution to environmental protection you can also download
POLARIZATION EXTINCTION RATIO MEASUREMENT TEST SETFOR V-GROOVE ASSEMBLIES AND PM PATCHCORDS
219 Westbrook Rd, Ottawa, ON, Canada, K0A 1L0 Toll Free: 1-800-361-5415 Tel:(613) 831-0981 Fax:(613) 836-5089 E-mail: sales@ozoptics.com POLARIZATION EXTINCTION RATIO MEASUREMENT TEST SETFOR V-GROOVE ASSEMBLIES
Dense Wavelength Division Multiplexer (DWDM) 200 GHz Spacing, Multi-Channel, 2ch, 4ch, 8ch, 16ch, 20ch in PEACOC Flexible Tray
FEATURES: RoHS 6/6 Compliant Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Low Insertion Loss Patented accessibility; easy, fast and accurate High Channel Isolation Flat and Wide Passband
SFP-550. Polishing Process Manual , Matushidai, Matsudo-Shi, Chiba Japan TEL: FAX:
SFP-550 Polishing Process Manual 296-1, Matushidai, Matsudo-Shi, Chiba 270-2214 Japan TEL: +81-47-388-6111 FAX: +81-47-388-4477 INTRODUCTION This manual covers polishing conditions and procedures with
V23870-A211x-xx00 (*) Bi-Directional Pigtail SFF Transceiver 155 Mb/s, 1310 nm Tx / 1310 nm Rx
Preliminary Data Sheet V23870-A211x-xx00 (*) Bi-Directional Pigtail SFF Transceiver 155 Mb/s, 1310 nm Tx / 1310 nm Rx FEATURES Integrated Beam Splitter Bi-Directional Transmission in a single optical window
CXE880 FIBRE OPTIC NODE
Kari Mäki 29.4.2015 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,
50/100 GHz, 100/200 GHz Passive Interleavers. IBC Series
50/100 GHz, 100/200 GHz Passive Interleavers IBC Series www.lumentum.com Data Sheet The Lumentum interleaver is a terabit-enabling technology for ultradense wavelength-division multiplexing (DWDM) applications.
Pitch Reducing Optical Fiber Array Two-Dimensional (2D)
PROFA Pitch Reducing Optical Fiber Array Two-Dimensional (2D) Pitch Reducing Optical Fiber Arrays (PROFAs) provide low loss coupling between standard optical fibers and photonic integrated circuits. Unlike
NOW WITH BROADER TUNING RANGE
NOW WITH BROADER TUNING RANGE Smarter Benchtop Tunable Laser Source Benchtop Tunable Laser Source Narrow 100kHz linewidth Full tunability across C band Smarter calibration for enhanced power flatness 0.01pm
GainMaker High Output Reverse Segmentable Node with 40/52 MHz Split
Data Sheet GainMaker High Output Reverse Segmentable Node with 40/52 MHz Split The GainMaker High Output Reverse Segmentable (RS) Node is designed to serve as an integral part of today s network architectures.
Agilent 81950A Compact Tunable Laser Source module User s Guide
Agilent 81950A Compact Tunable Laser Source module User s Guide Agilent Technologies Notices Agilent Technologies, Inc. 2012 No part of this manual may be reproduced in any form or by any means (including
TECHNICAL DATASHEET FOR LOOSE TUBE OPTICAL FIBER CABLE. Air Blown Micro LC Cable
TECHNICAL DATASHEET FOR LOOSE TUBE OPTICAL FIBER CABLE Air Blown Micro LC Cable ITU-T G.652.D 6~72F Customer : Czech Atlantis Date : Oct. 31. 2007 Author : MinLi Fu Manager : HanDong Choi Department :
User Manual. Installation Transmit Receive Module SFP/XFP
User Manual Installation Dragon PTN Transmit Receive Module SFP/XFP Installation Transmit Receive Module SFP/XFP Technical support https://hirschmann-support.belden.com The naming of copyrighted trademarks
Applications. version *Note1 ) Pin Type
GFLP-5xxxxxxx 1550nm MQW-FP Laser Diode with pigtail For 1.25Gbps and 2.5Gbps application Features Coaxial Package InGasP/InP MQW-FP laser Diode Low threshold, high slope efficiency and high output power
ekсkoм TECHNICAL DATA SHEET FOR Duct/Aerial Application kabeli.eu (SM 24 Fibers) Technical literature for Optical Fiber Cable
TECHNICAL DATA SHEET FOR Single Mode Optical Fibre Cable Duct/Aerial Application (SM 24 Fibers) kabeli.eu ekсkoм CATV, LAN, GEPON, SECURITY Page 1 of 6 1. Cable Construction 1.1 Cable cross-section 2.
TECHNICAL DATA SHEET FOR Uni-tube Single Mode Optical Fibre Cable ARMORED. (SM 2~24 Fibers)
TECHNICAL DATA SHEET FOR Uni-tube Single Mode Optical Fibre Cable ARMORED (SM 2~24 Fibers) Product: Single Mode Optical Fiber Cable Producer: XCOM LTD. / Bulgaira Date: August 1, 2012 Write by: Petar Georgiev
Transceiver Ordering Guide
Transceiver Ordering Guide All Systems Broadband offers a wide array of compact form-factor pluggable modules to optimize the performance of your networks. These modules are designed to fit switches, routers,
ModBox-OBand-56GBaud-PAM4 O-Band, 56 Gbaud PAM-4 Reference Transmitter
-OBand-5GBaud-PAM4 O-Band, 5 Gbaud PAM-4 Reference Transmitter The -OBand-5Gbaud-PAM4 is a 4-level Pulse Amplitude Modulation (PAM-4) Optical Reference Transmitter that generates in the O-band excellent
Passive WDM Networking
Passive WDM Networking Company Introduction designs and markets all types of fibre optical Product portfolio: transmission products. Headquarted in Oslo, Norway, we serve Storage, Data and Telecom Networks
Outdoor, CCTV or CCTV, Fig 8 Armored.
Outdoor, CCTV or CCTV, Fig 8 Armored. Outdoor stranded Fig 8 Armored, Fiber optic cable for aerial installation. It support application such as IEEE802.3, 10G Ethernet, Gigabit Ethernet, Fast Ethernet,
ModBox-CBand-NRZ series C-Band, 28 Gb/s, 44 Gb/s, 50 Gb/s Reference Transmitters
The is a family of Reference Transmitters that generate excellent quality NRZ optical data streams up to 28 Gb/s, 44 Gb/s, 50 Gb/s in the C-band. These transmitters produce very clean eye diagrams with
Product Bulletin. Temperature Tunable 10 mw WDM Laser for Direct Modulation in Links up to 180 km CQF413/608 Series
Product Bulletin 13/608-19 927 70 Temperature Tunable 10 mw WDM Laser for Direct Modulation in Links up to 180 km CQF413/608 Series The CQF413/608 is a 2 channel tunable (100 GHz ITU grid) directly modulated
ModBox-CBand-28Gb/s-DPSK C-Band, 28 Gb/s DPSK Reference Transmitter
-CBand-28Gb/s-DPSK FEATURES Full C-Band Reference Transmitter Up to 28 Gb/s Reliable & reproducible measurements High eye diagram stability APPLICATIONS Transmission system test Components characterization
Dual Parallel Mach-Zehnder (DPMZ) Modulator
AGILE OPTICAL COMPONENTS Dual Parallel Mach-Zehnder (DPMZ) Modulator Key Features Monolithically integrated, parallel, high-speed MZ modulators, with a phase modulator superstructure High-speed MZ modulators