沐浴剂. GB/T Bath agents and shower agents
|
|
- Cody Watson
- 5 years ago
- Views:
Transcription
1 Bath agents and shower agents 沐浴剂 General Administration of Quality Supervision, Inspection and Quarantine of China (AQSIQ) Standardization Administration of China (SAC) Translated by Chemlinked Release Date 2017/11/01 Implementation Date 2018/05/01
2 Disclaimer This is an unofficial document provided by ChemLinked (chemlinked.com/en/), a division of REACH24H Consulting Group, as an informational service to assist non-chinese companies. This document should only be used as a reference and in case of any discrepancy between the English and Chinese versions the original Chinese version shall prevail. ChemLinked is a unique portal to must-know Asia Pacific Chemical, Cosmetic, Food, Agrochemical regulatory issues. Nondisclosure: You may not disclose this document to anyone else without the written permission of ChemLinked. For further clarification and questions, please contact us: cosmetic@chemlinked.com
3 Y 43 National Standard of the People s Republic of China GB/T GB/T Bath agents and shower agents 沐浴剂 Date of Publication: Date of Implementation: Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People s Republic of China Standardization Administration of the People s Republic of China
4 Foreword This standard is drafted in accordance with the rules given in GB/T This standard was proposed by China National Light Industry Council. This standard is under the jurisdiction of China National Technical Committee for Standardization of Surfactants and Detergent products (SAC/TC 272). This standard was drafted by Xi an Kami Co. Ltd., Guangzhou LIBY Group Co. Ltd., Shanghai Jahwa United Co., Ltd, Guangzhou Lonkey Industrial Co. Ltd., Unilever (China) Co., Ltd., Johnson & Johnson (China) Co., Ltd., Shijiazhuang Henkel Chemical Engineering Technical Consulting Service Co., Ltd., Infinitus (China) Co., Ltd., China Research Institute of Daily Chemical Industry [National Center for Supervision and Inspection of Detergent Products Quality (Taiyuan)]. The main drafters of this standard are as follows: Yao Chenzhi, Yang Zuoyi, Wang Hanzhou, Zhao Jianhong, Chen Xiuyun, Li Hua, Yu Wen, Gao Gejun, Xiao Lei, and Sun Yongqiang.
5 Bath agents and shower agents 1 Scope This standard specifies the product classification and marking, requirements, testing methods, inspection rules, labeling, packaging, transportation and storage of bath agents and shower agents. This standard applies to the products formulated with surfactants as active ingredients and used for human skin cleaning, the forms of which include liquid, paste, solid (except soaps). 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition (noted date) cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 6682 Water for analytical laboratory use - Specification and test methods GB/T Surface active agents - Detergents - Testing methods GB/T Technical specification for safety of soaps and detergents QB/T 2951 Inspecting rules for detergent products QB/T 2952 Requirements for detergent marks and packaging Safety and Technical Standards for Cosmetics (2015 edition) China Food and Drug Administration 3 Product Classification and Marking 3.1 Product classification The products are divided into adult (ordinary, concentrated) type and child (ordinary, concentrated) type according to the users.
6
QB/T Toilet Soap. National Development and Reform Commission of China (NDRC) Translated by Chemlinked
Toilet Soap 香皂 National Development and Reform Commission of China (NDRC) Translated by Chemlinked Release Date 2008/03/12 Implementation Date 2008/09/01 Disclaimer This is an unofficial document provided
More informationQB/T Translated English of Chinese Standard: QB/T LIGHT INDUSTRY STANDARD
Translated English of Chinese Standard: QB/T4348-2012 www.chinesestandard.net Sales@ChineseStandard.net ICS 71.100.40 Classification number: Y 43 Registration number: 36751-2012 LIGHT INDUSTRY STANDARD
More informationOrganic Products Part 4: Management System
Translated English of Chinese Standard: GB/T19630.4-2011 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 65.020.01 B 04 NATIONAL STANDARD OF THE PEOPLE S
More informationGB/T / ISO 594-1:1986
Translated English of Chinese Standard: GB/T1962.1-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 11.040.20 C 31 GB/T 1962.1-2015 / ISO
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T6556-2016 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 21.140 J 22 Replacing GB/T 6556-1994 Type,
More informationQB/T Translated English of Chinese Standard: QB/T LIGHT INDUSTRY STANDARD OF
Translated English of Chinese Standard: QB/T2155-2010 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net QB LIGHT INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.140.35
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB
Translated English of Chinese Standard: GB706-2008 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 77.140.70 H 44 Replacing GB/T 706-1988, GB/T
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T708-2006 www.chinesestandard.net Sales@ChineseStandard.net ICS 77.140.50 H 46 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB Replacing GB/T 708-1988
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T19348.1-2014 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 37.040.25; 19.100 J 04 GB/T 19348.1-2014
More informationNational Standard of The People s Republic of China
Translated English of Chinese Standard: GB/T17626.11-2008 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 33.100.20 L 06 GB National Standard of The People
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
GB/T 9-00 Translated English of Chinese Standard: GB/T9-00 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS.00.0 J 0 GB/T 9-00 Replacing GB/T
More informationInstructions for Use of Products of Consumer Interest- Part 4: Textiles and Apparel
Translated English of Chinese Standard: GB5296.4-2012 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 03.080.30; 59.080.01 A 12 NATIONAL STANDARD OF THE PEOPLE
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T33877-2017 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 19.100 J 04 Non-Destructive Testing Test
More informationGB Translated English of Chinese Standard: GB National Standard of the People's Republic of China
Translated English of Chinese Standard: GB17625.1-2012 ICS 33.100.10 L 06 GB National Standard of the People's Republic of China GB 17625.1-2012 Replacing GB 17625.1-2012 Electromagnetic compatibility
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T32895-2016 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 29.200 K 81 Communication protocols for
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T5782-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 21.060.10 J 13 GB/T 6171-2016 Replacing
More informationGB/T / ISO :1999
Translated English of Chinese Standard: GB/T2828.1-2012 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 03.120.30 A 41 GB/T 2828.1-2012 / ISO
More informationYY / ISO 15223:2000
Translated English of Chinese Standard: YY0466-2003 www.chinesestandard.net Sales@ChineseStandard.net ICS 11.040.01 C 30 PHARMACEUTICAL INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA YY / ISO 15223:2000
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T519-2017 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.01 G 41 GB/T 519-2017 Replacing
More informationGB / IEC/CISPR 11:2010
Translated English of Chinese Standard: GB4824-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 33.100 L 06 GB 4824-2013 / IEC/CISPR 11:2010
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T1804-2000 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 17.040.10 J 04 GB/T 1804-2000 eqv ISO
More informationGB/T / CISPR 15:2005
Translated English of Chinese Standard: GB17743-2007 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 33.100 L 06 GB/T 17743-2007 / CISPR 15:2005
More informationNATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中华人民共和国国家标准. Shanks for Footwear 鞋类钢勾心
ICS 61.060 Y 78 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中华人民共和国国家标准 GB 28011-2011 Shanks for Footwear 鞋类钢勾心 Issued on: October 31, 2011 Implemented on: August 1, 2012 Jointly issued by the
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T20808-2011 www.chinesestandard.net Email: Sales@ChineseStandard.net ICS 85.060 GB Y 32 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T 20808-2011 Partly
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T3820-1997 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF GB THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.30 W 04 Replacing GB 3820-1983
More informationQB/T Translated English of Chinese Standard: QB/T
Translated English of Chinese Standard: QB/T1337-2010 www.chinesestandard.net Sales@ChineseStandard.net QB LIGHT INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 97.180 Classification number: Y50
More informationDRAFT TANZANIA STANDARD. TBS/CDC-2(4970) P3- Carbolic Soap - Specification (Revision of TZS 221:1984)
DRAFT TANZANIA STANDARD TBS/CDC-2(4970) P3- Carbolic Soap - Specification (Revision of TZS 221:1984) TANZANIA BUREAU OF STANDARDS Foreword This Draft Tanzania Standard is being developed by the Soap and
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF
Translated English of Chinese Standard: GB18099-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.040.20 T 38 GB 18099-2013 Replacing
More informationGB/Z Translated English of Chinese Standard: GB/Z
Translated English of Chinese Standard: GB/Z32564-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARDIZATION GUIDANCE TECHNICAL DOCUMENT OF THE PEOPLE 'S REPUBLIC OF CHINA ICS 21.060.10
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T6151-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 59.080.01 W 04 GB/T 6151-2016 Replacing
More informationGB / CISPR 14-1:2005
Translated English of Chinese Standard: GB4343.1-2009 ICS 33.100 L 06 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB / CISPR 14-1:2005 Replacing GB 4343.1-2003 Electromagnetic compatibility - Requirements
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T7307-2001 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 21.040.20 J 04 GB/T 7307-2001 eqv ISO
More informationYY/T / ISO :2012
Translated English of Chinese Standard: YY/T0466.1-2016 www.chinesestandard.net Sales@ChineseStandard.net ICS 01.080.20;11.040.01 C 37 PHARMACEUTICAL INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA
More informationGB/T / CISPR 25:2008
Translated English of Chinese Standard: GB/T18655-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 33.100 L 06 GB/T 18655-2010 / CISPR 25:2008
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T14214-2003 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 11.040.70 Y 89 GB/T 14214-2003 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T4808.2-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 9.080.30 W04 GB/T 4802.2-2008 Replacing
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T33014.2-2016 www.chinesestandard.net Sales@ChineseStandard.net How to BUY & immediately GET a full-copy of this standard? 1. GB/T 33014.2-2016 www.chinesestandard.net;
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T11363-2008 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 25.160.50
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T819.
Translated English of Chinese Standard: GB/T819.2-2016 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 21.060.10 J 13 Replacing GB/T 819.2-1997
More informationGB/T / CISPR 14-2:2008
Translated English of Chinese Standard: GB/T4343.2-2009 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 33.100 K 64 GB/T 4343.2-2009 / CISPR
More informationISO/TR TECHNICAL REPORT. Textiles Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests
TECHNICAL REPORT ISO/TR 12116 First edition 2008-07-15 Textiles Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests Textiles Méthodes de laboratoire pour
More informationISO 2836 INTERNATIONAL STANDARD. Graphic technology Prints and printing inks Assessment of resistance to various agents
INTERNATIONAL STANDARD ISO 2836 Third edition 2004-03-15 Graphic technology Prints and printing inks Assessment of resistance to various agents Technologie graphique Impressions et encres d imprimerie
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T13306-2011 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 21. 010 J 29 Replacing GB/T 13306-1991
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14703 Second edition 2008-04-15 Fine ceramics (advanced ceramics, advanced technical ceramics) Sample preparation for the determination of particle size distribution of ceramic
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. FZ/T
Translated English of Chinese Standard: FZ/T50010.13-2011 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL TEXTILE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA FZ ICS 59.060.20 W 50 FZ/T
More informationGB/T / IEC :2007
Translated English of Chinese Standard GB/T2423.1-2008 Translated by: www.chinesestandard.net Email: Sales@ChineseStandard.net GB ICS 19.040 K 04 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T
More informationNATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA
Translated English of Chinese Standard: GB/T18230.1-2000 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB/T
More informationThePeople s RepublicofChina
ThePeople s RepublicofChina EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equaljusticefor al,abeterinformedcitizenry,theruleoflaw,worldtradeandworld peace,thislegaldocumentisherebymadeavailableonanoncommercial
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11699-1 Second edition 2008-09-15 Non-destructive testing Industrial radiographic film Part 1: Classification of film systems for industrial radiography Essais non destructifs
More informationTB/T Translated English of Chinese Standard: TB/T RAILWAY INDUSTRY STANDARD
Translated English of Chinese Standard: TB/T 1618-2001 www.chinesestandard.net Sales@ChineseStandard.net RAILWAY INDUSTRY STANDARD TB OF THE PEOPLE S REPUBLIC OF CHINA TB/T 1618-2001 eqv ISO 5948:1994
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T4851-2014 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.180 Z 38 GB/T 4851-2014 Replacing GB
More informationISO INTERNATIONAL STANDARD IULTCS/IUC Leather Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis
INTERNATIONAL STANDARD ISO 17226-2 IULTCS/IUC 19-2 First edition 2008-05-01 Leather Chemical determination of formaldehyde content Part 2: Method using colorimetric analysis Cuir Dosage chimique du formaldéhyde
More informationNational Standard of the People s Republic of China
ICS 01.120 A 00 National Standard of the People s Republic of China GB/T XXXXX.1 201X Association standardization Part 1: Guidelines for good practice Click here to add logos consistent with international
More informationINTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 23713 First edition 2005-07-01 Pulps Determination of fibre coarseness by automated optical analysis Polarized light method Pâtes Détermination
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 28723 First edition 2008-10-15 Vitreous and porcelain enamels Determination of the edge covering on enamelled steel plate to be used in heat exchangers Émaux vitrifiés Détermination
More informationISO INTERNATIONAL STANDARD. Glass in building Silvered, flat-glass mirror. Verre dans la construction Miroir argenté en verre plat
INTERNATIONAL STANDARD ISO 25537 First edition 2008-09-15 Glass in building Silvered, flat-glass mirror Verre dans la construction Miroir argenté en verre plat Reference number ISO 25537:2008(E) ISO 2008
More informationJB/T Translated English of Chinese Standard: JB/T
Translated English of Chinese Standard: JB/T9249-1999 www.chinesestandard.net Sales@ChineseStandard.net MACHINERY INDUSTRY STANDARD OF JB THE PEOPLE S REPUBLIC OF CHINA ICS 17.120 N 12 JB/T 9249-1999 Replacing
More informationISO INTERNATIONAL STANDARD. Optics and photonics Minimum requirements for stereomicroscopes Part 2: High performance microscopes
INTERNATIONAL STANDARD ISO 11884-2 Second edition 2007-02-01 Optics and photonics Minimum requirements for stereomicroscopes Part 2: High performance microscopes Optique et photonique Exigences minimales
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 18055-1 First edition 2004-06-01 Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) Photographie et
More informationRecommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment API RECOMMENDED PRACTICE 17U FIRST EDITION, FEBRUARY 2015
Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment API RECOMMENDED PRACTICE 17U FIRST EDITION, FEBRUARY 2015 Special Notes API publications necessarily address problems
More informationISO INTERNATIONAL STANDARD. Textiles Determination of resistance to water penetration Impact penetration test
INTERNATIONAL STANDARD ISO 18695 First edition 2007-11-15 Textiles Determination of resistance to water penetration Impact penetration test Textiles Détermination de la résistance à la pénétration de l'eau
More informationISO INTERNATIONAL STANDARD. Dentistry Rotary bur instruments Part 2: Finishing burs
INTERNATIONAL STANDARD ISO 3823-2 Second edition 2003-05-15 Dentistry Rotary bur instruments Part 2: Finishing burs Art dentaire Instruments rotatifs de fraisage Partie 2: Fraises à finir Reference number
More informationGB / CISPR 14-1:2011
Translated English of Chinese Standard: GB4343.1-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 33.100 L 06 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB
More informationISO INTERNATIONAL STANDARD. Paints and varnishes Determination of the volatile organic compound content of low-voc emulsion paints (in-can VOC)
INTERNATIONAL STANDARD ISO 17895 First edition 2005-03-15 Paints and varnishes Determination of the volatile organic compound content of low-voc emulsion paints (in-can VOC) Peintures et vernis Détermination
More informationISO INTERNATIONAL STANDARD. Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods
INTERNATIONAL STANDARD ISO 11345 Second edition 2006-02-01 Rubber Assessment of carbon black and carbon black/silica dispersion Rapid comparative methods Caoutchouc Évaluation de la dispersion du noir
More informationISO INTERNATIONAL STANDARD. Textile floor coverings Laboratory cleaning procedure using spray extraction
INTERNATIONAL STANDARD ISO 11379 Second edition 2009-02-01 Textile floor coverings Laboratory cleaning procedure using spray extraction Revêtements de sol textiles Méthode de nettoyage en laboratoire par
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12488-1 Second edition 2012-07-01 Cranes Tolerances for wheels and travel and traversing tracks Part 1: General Appareils de levage à charge suspendue Tolérances des galets et
More informationISO INTERNATIONAL STANDARD. Textiles Water resistance Rain tests: exposure to a horizontal water spray
INTERNATIONAL STANDARD ISO 22958 First edition 2005-03-15 Textiles Water resistance Rain tests: exposure to a horizontal water spray Textiles Résistance à l'eau Essai d'arrosage: exposition à une pulvérisation
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13799 First edition 2012-07-01 Ships and marine technology Ship s mooring and towing fittings Recessed bitts (Casting type) Navires et technologie maritime Corps-morts et ferrures
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20860-1 First edition 2008-10-15 Road vehicles 50 Ω impedance radio frequency connection system interface Part 1: Dimensions and electrical requirements Véhicules routiers Interface
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 5001 Fifth edition 2012-08-01 Cold-reduced carbon steel sheet for vitreous enamelling Tôles en acier au carbone laminées à froid pour émaillage par vitrification Reference number
More informationISO INTERNATIONAL STANDARD. Optics and optical instruments Specifications for telescopic sights Part 1: General-purpose instruments
INTERNATIONAL STANDARD ISO 14135-1 First edition 2003-12-01 Optics and optical instruments Specifications for telescopic sights Part 1: General-purpose instruments Optique et instruments d'optique Spécifications
More informationISO INTERNATIONAL STANDARD. Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-Köthen method
INTERNATIONAL STANDARD ISO 5269-2 Third edition 2004-11-01 Pulps Preparation of laboratory sheets for physical testing Part 2: Rapid-Köthen method Pâtes Préparation des feuilles de laboratoire pour essais
More informationISO Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12
INTERNATIONAL STANDARD ISO 7041 Fourth edition 2012-05-15 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 Écrous hexagonaux autofreinés (à anneau non métallique),
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10511 Third edition 2012-12-15 Prevailing torque type hexagon thin nuts (with non-metallic insert) Écrous hexagonaux bas autofreinés (à anneau non métallique) Reference number
More informationISO 216 INTERNATIONAL STANDARD. Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction
INTERNATIONAL STANDARD ISO 216 Second edition 2007-09-15 Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction Papiers à écrire et certaines
More informationDL/T Translated English of Chinese Standard: DL/T (DLT ; DLT ) Translated by:
Translated English of Chinese Standard: DL/T911-2004(DLT911-2004; DLT 911-2004) Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Wayne@ChineseStandard.net ICS 27.100 F 24 File No.: 15182-2005
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 521 Second edition 2011-10-01 Machine chucking reamers with cylindrical shanks and Morse taper shanks Alésoirs à machine, à queue cylindrique et à queue cône Morse Reference
More informationISO INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader
INTERNATIONAL STANDARD ISO 5470-2 First edition 2003-04-15 Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader Supports textiles revêtus de caoutchouc ou
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15223-1 First edition 2007-04-15 Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements Dispositifs
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4026 Third edition 2003-12-01 Hexagon socket set screws with flat point Vis sans tête à six pans creux, à bout plat Reference number ISO 4026:2003(E) ISO 2003 ISO 4026:2003(E)
More informationISO 8752 INTERNATIONAL STANDARD. Spring-type straight pins Slotted, heavy duty
INTERNATIONAL STANDARD ISO 8752 Third edition 2009-06-15 Spring-type straight pins Slotted, heavy duty Goupilles cylindriques creuses, dites goupilles élastiques Série épaisse Reference number ISO 8752:2009(E)
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 28721-1 First edition 2008-12-01 Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 1: Quality requirements for apparatus, components, appliances and
More informationISO 3251 INTERNATIONAL STANDARD. Paints, varnishes and plastics Determination of non-volatile-matter content
INTERNATIONAL STANDARD ISO 3251 Fourth edition 2008-02-15 Paints, varnishes and plastics Determination of non-volatile-matter content Peintures, vernis et plastiques Détermination de l'extrait sec Reference
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7051 Second edition 2011-08-01 Cross-recessed raised countersunk (oval) head tapping screws Vis à tôle à tête fraisée bombée à empreinte cruciforme Reference number ISO 7051:2011(E)
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17131 IULTCS/IUP 56 First edition 2012-08-15 Leather Identification of leather with microscopy Cuir Identification du cuir par microscopie Reference number ISO 17131:2012(E)
More informationISO INTERNATIONAL STANDARD. Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours
INTERNATIONAL STANDARD ISO 5751-3 Sixth edition 2010-11-15 Motorcycle tyres and rims (metric series) Part 3: Range of approved rim contours Pneumatiques et jantes pour motocycles (séries millimétriques)
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7380-2 First edition 2011-08-01 Button head screws Part 2: Hexagon socket button head screws with collar Vis à tête cylindrique bombée plate Partie 2: Vis à tête cylindrique
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17325-2 First edition 2014-10-15 Ships and marine technology Marine environment protection Oil booms Part 2: Strength and performance requirements Navires et technologie maritime
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4762 Fourth edition 2004-03-01 Hexagon socket head cap screws Vis à tête cylindrique à six pans creux Reference number ISO 4762:2004(E) ISO 2004 PDF disclaimer This PDF file
More informationISO INTERNATIONAL STANDARD. Hexalobular socket pan head screws. Vis à métaux à tête cylindrique bombée large à six lobes internes
INTERNATIONAL STANDARD ISO 14583 Second edition 2011-03-15 Hexalobular socket pan head screws Vis à métaux à tête cylindrique bombée large à six lobes internes Reference number ISO 14583:2011(E) ISO 2011
More informationISO 5496 INTERNATIONAL STANDARD. Sensory analysis Methodology Initiation and training of assessors in the detection and recognition of odours
INTERNATIONAL STANDARD ISO 5496 Second edition 2006-08-15 Sensory analysis Methodology Initiation and training of assessors in the detection and recognition of odours Analyse sensorielle Méthodologie Initiation
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 20860-1 First edition 2008-10-15 Road vehicles 50 Ω impedance radio frequency connection system interface Part 1: Dimensions and electrical requirements
More informationISO INTERNATIONAL STANDARD. Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions
INTERNATIONAL STANDARD ISO 15488 Second edition 2003-11-15 Collets with 8 setting angle for tool shanks Collets, nuts and fitting dimensions Pinces de serrage avec angle de réglage de 8 pour queues d'outil
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 13079 First edition 2011-07-15 Laboratory glass and plastics ware Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren
More informationISO Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 7040 Third edition 2012-12-15 Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10 Écrous hexagonaux
More informationISO INTERNATIONAL STANDARD. Rubber Tolerances for products Part 2: Geometrical tolerances
INTERNATIONAL STANDARD ISO 3302-2 Second edition 2008-10-01 Rubber Tolerances for products Part 2: Geometrical tolerances Caoutchouc Tolérances pour produits Partie 2: Tolérances géométriques Reference
More informationECMA-356. NFCIP-1 - RF Interface Test Methods. 2 nd Edition / June Reference number ECMA-123:2009
ECMA-356 2 nd Edition / June 2013 NFCIP-1 - RF Interface Test Methods Reference number ECMA-123:2009 Ecma International 2009 COPYRIGHT PROTECTED DOCUMENT Ecma International 2013 Contents Page 1 Scope...
More informationISO INTERNATIONAL STANDARD. Hexagon bolts with flange Small series Product grade A
INTERNATIONAL STANDARD ISO 15071 Second edition 2011-06-01 Hexagon bolts with flange Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique Série étroite Grade A Reference number
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7900 Second edition 2006-06-01 Steel wire and wire products for fences Zinc- and zinc-alloy-coated steel barbed wire Fils et produits tréfilés en acier pour clôtures Ronces en
More information