A-51 Incandescent Factory Sealed Luminaires Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit.
|
|
|
- Jerome Emery Walters
- 6 years ago
- Views:
Transcription
1 Explosionproof NEC/CEC For Group A and B: Class I, Division 1 and 2, Groups A, B, C, D NEC/CEC For Group C and D: Applications A-51 Series Incandescent Class I, Groups A, B, C and D; and Class II, Groups E, F and G applications (see listings and area suitability chart). Ideal for use in chemical and petrochemical plants, and in other heavy process areas where ignitable vapors, dust, moisture and corrosive atmospheres may be present. Suitable for use in wet locations. Wide range of wattages 100 W through 300 W incandescent lamps. Choice of units with or without guard, as well as choice of porcelain, polyester or aluminum reflectors. Choice of mountings: pendant, ceiling, 25 stanchion, long bracket and 15 short bracket. Porcelain reflectors for standard applications and fiberglass reinforced polyester reflectors for installations where fixture is subject to exceptionally severe corrosive atmospheres. High bay reflector for installations where mounting height from work plane ranges from 762 mm (20 to 30 ft/508 in). Class I, Groups A and B fixtures have special UL-approved sintered metal flame arrester. Features All A-51 fixtures are factory-sealed; no external sealing fittings required. New high temperature phenolic connection block in mounting hood has rugged leaf spring contacts loosen two screws, rotate and remove for quick wiring. Safe, easy servicing or relamping without disconnecting any wiring. Wireless fixture unit easily threads off mounting hood for convenient servicing or for immediate exchange with standby unit. All joints are flame-tight. Specially formulated two-coat baked epoxy enamel provides superior protective finish to resist corrosion. Applied to all mounting hoods, fixture units and guards. New high temperature glass-reinforced phenolic socket block in fixture unit has collector ring and pin that automatically make electrical contact as fixture unit is threaded onto mounting hood. Globes in A-51 fixtures are explosionproof and heat- and impact-resistant glass. Prismatic configuration on globe interior provides light control while allowing smooth exterior surface for cleaning. A-51 fixture units have standardized threads to fit all A-51 and mounting hoods. All fixtures have aluminum inner reflector for increased lumen efficiency. A-51 fixture guards to protect globe are of rugged copperfree aluminum construction and double epoxy coated. Easily mount to globe ring with 3 screws. Standard Materials Fixtures and guards: copperfree (4/10 of 1% max.) aluminum. Pendant mounting hoods: copperfree (4/10 of 1% max.) aluminum. Ceiling and bracket mounting hoods: malleable iron with aluminum adapters. Reflectors: porcelain-enameled steel, aluminum or fiberglass reinforced polyester. Polyester Reflector Polyester Reflector Group A and B Group C and D Porcelain Reflector Porcelain Reflector Standard Finishes Fixtures, guards and mounting hoods: two-coat epoxy-clad finish. Epoxy powder coat finish, electrostatically applied for complete, uniform surface protection. Steel reflectors: white porcelain enamel. Polyester and aluminum reflectors: natural finish. NEC/CEC Certifications and Compliances UL Standard: UL 1598, UL 844 UL Listed: E10444 CSA Standard: C22.2 No. 250, C22.2 No. 137 CSA Certified:
2 Explosionproof NEC/CEC: Class I, Division 1 and 2, Groups A, B, C, D. Illustrated Features Weights Fixture Units Wt. kg (lbs) Catalog Number 3.4 (7.6) AAU-1N 3.4 (7.6) AAU-15N 4.9 (10.7) AAU-2NS 9.2 (20.3) AAU-5NS 6.8 (15.0) AAUA (18.0) AAUA-2 Mounting Hoods Type Wt. kg (lbs) Pendant 0.6 (1.3) Ceiling 2.2 (4.8) Stanchion 0.7 (1.6) Long Bracket 4.0 (8.9) Short Bracket 2.2 (4.8) Guards Wt. kg (lbs) Catalog Number 0.2 (0.4) AAGU (0.8) AAGU (1.9) AAGU (0.5) AAGUA-15 Standard Reflectors Wt. kg (lbs) Catalog Number 1.3 (2.8) AARP-2ST 1.0 (2.1) AARW-15ST 1.3 (2.9) AARW-2ST 2.0 (4.3) AARW-5ST 1.0 (2.1) AARW-15ST 30 Angle Reflectors Wt. kg (lbs) Catalog Number 1.5 (3.3) AARP-2AN 1.0 (2.1) AARW-15AN 1.1 (2.4) AARW-2AN 3.2 (7.0) AARW-5AN 1.0 (2.1) AARW-15AN High Bay Reflectors Wt. kg (lbs) Catalog Number 1.3 (2.9) AARE-2HB 1.8 (3.9) AARE-5HB 621
3 Explosionproof NEC/CEC: Class I, Division 1 and 2, Groups A, B, C, D Fixture Unit Lamp Watts Without Reflectors Standard Dome 30 Angle High Bay Supply Wire C ( F) Class I Division 1 and Division 2 Groups C and D AAU1N 100 W A19 T5 T5 T5 125 (257) 100 W A21 T5 T5 T5 125 (257) AAU15N 150 W A23 T3C T3C T3C 125 (257) 200 W A25 T3C T3C T3C 125 (257) 200 W PS25 T3C T3C T3C 125 (257) 300 W PS25 T3C T3A T3A (D) 125 (257) AAU2NS 200 W PS25 T3C T3C T3C 110 (230) 200 W PS30 T3C T3C T3C 110 (230) 300 W PS25 T3C T3C T3C 110 (230) 300 W PS30 T3C T3C T3C 110 (230) Class I Division 1 and Division 2 Groups A, B, C and D AAUA W A23 T3C T3C T3C 110 (230) 150 W A25 T3C T3C T3C 110 (230) 200 W A25 T3C T3C T3C 110 (230) 200 W PS25 T3C T3C T3C 110 (230) AAUA2 200 W PS25 T3C T3C T3C 110 (230) 200 W PS30 T3C T3C T3C 110 (230) 300 W PS25 T3C T3C T3C 110 (230) 300 W PS30 T3C T3C T3C 110 (230) Class II Division 1 and Division 2 Groups E, F and G AAU1N 100 W A19 T3C T3C T3C 125 (257) 100 W A21 T3C T3C T3C 125 (257) AAU15N 150 W A23 T3C T3C T3C 125 (257) 200 W A25 T3C T3C T3C 125 (257) 200 W PS25 T3 T3 T3 125 (257) 300 W PS25 T3 125 (257) AAU2NS 200 W PS25 T3C T3C T3C 110 (230) 200 W PS30 T3C T3C T3C 110 (230) 300 W PS25 T3C T3C T3A (EF) 110 (230) 300 W PS30 T3C T3C T3A (EF) 110 (230) NOTE: Ambient suitability of these incandescent fixtures: +40 C (+104 F) For Group A, use Pendant Mount only. 622
4 For Group C and D Locations. Explosionproof NEC/CEC: Type Pendant One Hub, Rigid or Flexible Mounting 100 W (AAU-1N) A W (AAU-15N) A-23 PS W (AAU-2NS) PS-30 Hub Size (Inches) Catalog Number 1/2 AP1050 3/4 AP AP /2 AP1550 3/4 AP AP /2 AP2050 3/4 AP AP20100 Ceiling Four Hubs, Three Close-up Plugs 100 W (AAU-1N) A W (AAU-15N) A-23 PS W (AAU-2NS) PS Stanchion One Hub Not UL Listed 100 W (AAU-1N) A W (AAU-15N) A-23 PS W (AAU-2NS) PS-30 1/2 AC1050 3/4 AC AC /2 AC1550 3/4 AC AC /2 AC2050 3/4 AC AC /2 AN /2 AN /2 AN20150 See A-51 Incandescent Factory Sealed Luminaire Classified Area Suitability page for suitability of specific fixtures. 1-1/2 tapped hub furnished with a 1-1/2 to 1-1/4 reducer. 623
5 For Group C and D Locations. Explosionproof Type Long Bracket Four Hubs, Three Close-up Plugs 100 W (AAU-1N) A W (AAU-15N) A-23 PS W (AAU-2NS) PS-30 Hub Size (Inches) Catalog Number 1/2 ALB1050 3/4 ALB ALB /2 ALB1550 3/4 ALB ALB /2 ALB2050 3/4 ALB ALB Short Bracket Two Hubs, One Close-up Plug 100 W (AAU-1N) A-21 1/2 ASB1050 3/4 ASB1075 Three-Way Exit Sign Single-Sided Exit Sign W (AAU-15N) A-23 PS W (AAU-2NS) PS-30 Epoxy enameled steel mm (6 in)-high red lettering W (Mounts to AAU-1N or AAU-15N fixture units in place of guard) 1/2 ASB1550 3/4 ASB1575 1/2 ASB2050 3/4 ASB2075 CJEXRN Epoxy enameled steel mm (6 in)-high red lettering W (Mounts to AAU-1N or AAU-15N fixture units in place of guard) (See page G2-24 for dimensions) AEXR-15R Guard Add suffix to fixture catalog number Guard -G See A-51 Incandescent Factory Sealed Luminaire Classified Area Suitability page for suitability of specific fixtures. 624
6 For Group C and D Locations. Explosionproof NEC/CEC For Group C and D: Mounting Hoods Type Hub Size (Inches) Catalog Number Pendant One Hub, Rigid or Flexible Mounting 1/2 AAP-50 3/4 AAP-75 1 AAP-100 Ceiling Four Hubs, Three Close-up Plugs 1/2 AAC-50 3/4 AAC-75 1 AAC Stanchion Not UL Listed One Hub 1-1/2 AAN-150 Long Bracket Four Hubs, Three Close-up Plugs 1/2 AALB-50 3/4 AALB-75 1 AALB Short Bracket Two Hubs, One Close-up Plug 1/2 AASB-50 3/4 AASB-75 Type Catalog Number Fixture Units 100 W A-21 AAU-1N W A-23 and PS-25 AAU-15N W PS-30 AAU-2NS Prismatic Glass Globes 100 W (AAU-1N) AAGL-1PR W (AAU-15N) AAGL-1PR W (AAU-2NS) AAGL-2PR Aluminum Guards 100 W (AAU-1N) AAGU W (AAU-15N) AAGU W (AAU-2NS) AAGU-2 1-1/2 tapped hub furnished with a 1-1/2 to 1-1/4 reducer. 625
7 For Group C and D Locations. Explosionproof NEC/CEC For Group C and D: Standard Dome (16.00) Porcelain Type Fixture Size Catalog Number (16.00) Polyester (Not for use with short brackets) Porcelain Polyester 100 W (AAU-1N) AARW-15ST W (AAU-15N) AARW-15ST W (AAU-2NS) AARW-2ST AARP-2ST 30 Angle (12.00) Porcelain Colored Glass Globes Replacement Socket Connection Block (12.00) Polyester 100 W (AAU-1N) AARW-15AN W (AAU-15N) AARW-15AN W (AAU-2NS) AARW-2AN AARP-2AN Amber 100 W (AAU-1N) AAGL-1A W (AAU-15N) AAGL-1A W (AAU-2NS) AAGL-2A Green 100 W (AAU-1N) AAGL-1G W (AAU-15N) AAGL-1G W (AAU-2NS) AAGL-2G Red 100 W (AAU-1N) AAGL-1R W (AAU-15N) AAGL-1R W (AAU-2NS) AAGL-2R 100 W (AAU-1N) Medium Base AASP W (AAU-15N) Medium Base AASP W (AAU-2NS) Medium Base AASP-44 Fits A-51 Mounting Hoods W VPT-7 Globe Gaskets Fiber and Aluminum Requires one of each Fiber Aluminum W (AAU-1N and AAU-15N) AASP-15V AASP-15A W (AAU-2NS) AASP-2V AASP-2A 626
8 For Group C and D Locations. Explosionproof NEC/CEC For Group C and D: Dimensions in Millimeters (Inches) 85.9 (3.38) (4.75) (4.69).38 (9.7) (5.38) 9.7 (.38) 68.3 (2.69) 66.8 (2.63) (5.75) 33.3 (1.31) Stanchion mm (in) Pendant mm (in) Ceiling mm (in) Long Bracket mm (in) Short Bracket mm (in) Size (Watts) A B C A B C A B C A B C A B C (11.47) (11.47) (13.07) (10.85) (10.85) (12.38) (11.50) (11.50) (12.71) (12.25) (12.25) (13.94) (11.63) (11.63) (13.25) (7.06) (7.06) (8.81) (13.75) (13.75) (15.44) (13.13) (13.13) (14.75) ( (13.75) (13.13) (12.38) (13.56) (7.06) (13.75) (13.13) (12.38) (13.56) (8.81) (15.44) (14.75) (13.25) (15.19) Size (Watts) A B A B A B (12.94) (12.94) (14.50) (12.00) (4.50) (10.00) (7.63) (14.00) (4.38) (10.00) (7.63) (16.00) (5.19) (12.00) (7.88) (12.00) (6.06) (9.13) (9.13) (10.13) For dimensions of fixture unit only, subtract pendant hood dimension 3.3 cm (1.31 ) from dimensions A and B as listed. Dimensions illustrated are for porcelain steel (dome and angle) and etched aluminum (high bay). Overall dimensions for fiberglass reinforced polyester reflectors are: standard dome mm (16-1/2 ) dia., (6 ) (152.4 ) high; 30 Angle mm (14-3/8 ) dia., 254 mm (10 ) high. 627
9 For Group C and D Locations. Explosionproof Photometric data shown here is based on a 200-watt type PS-30 lamp and is representative of the performance for all A-51 incandescent fixtures using 60-watt to 300-watt lamps. For candlepower values of fixtures with other lamps, use the following multipliers: 60 W A ; 100 W A ; 150 W A ; 200 W A ; 200 W A ; 200 W PS : 300 W PS ; W PS To determine candlepower values of fixtures with a guard, multiply by value shown with each curve. NEC/CEC For Group C and D: Photometric Data Effective Floor Cavity Reflectance (Rfc) is 20% A-51 Incandescent Fixture without Reflector Spacing to Mtg. Ht. Ratio 1.25:1 Guard.877 % Ceiling Rcc % Walls Rw ROOM CAVITY RATIOS A-51 Incandescent Fixture with Standard Dome Reflector Spacing to Mtg. Ht. Ratio 1.25:1 Guard.890 Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc % Walls Rw ROOM CAVITY RATIOS
10 For Group C and D Locations. Explosionproof Photometric data shown here is based on a 200-watt type PS-30 lamp and is representative of the performance for all A-51 incandescent fixtures using 60-watt to 300-watt lamps. For candlepower values of fixtures with other lamps, use the following multipliers: 60 W A ; 100 W A ; 150 W A ; 200 W A ; 200 W A ; 200 W PS : 300 W PS ; 300 W PS To determine candlepower values of fixtures with a guard, multiply by value shown with each curve. NEC/CEC For Group C and D: Photometric Data Effective Floor Cavity Reflectance (Rfc) is 20% % Ceiling Rcc A-51 Incandescent Fixture with High Bay Reflector Spacing to Mtg. Ht. Ratio 1.40:1 Guard "/ mm % Walls Rw ROOM CAVITY RATIOS A-51 Incandescent Fixture with 30 Reflector 11.16"/ mm B Back S Side F Front G Front W.Guard 629
11 For Group A and B Locations. Explosionproof NEC/CEC: Class I, Division 1 and 2, Groups A, B, C, D Pendant One Hub, Rigid or Flexible Mounting Hub Size (Inches) Catalog Number W (AAUA-15) 1/2 AAPA1550 PS-25 3/4 AAPA W (AAUA-2) 1/2 AAPA2050 PS-30 3/4 AAPA2075 Ceiling Four Hubs, Three Close-up Plugs W (AAUA-15) 1/2 AACA1550 PS-25 3/4 AACA W (AAUA-2) 1/2 AACA2050 PS-30 3/4 AACA Short Bracket Two Hubs, One Close-up Plug W (AAUA-15) 1/2 AASBA1550 PS-25 3/4 AASBA W (AAUA-2) 1/2 AASBA2050 PS-30 3/4 AASBA2075 Reflectors Porcelain Polyester Standard Dome Porcelain Polyester W (AAUA-15) AARW-15ST (16.00) (16.00) W (AAUA-2) AARW-2ST AARP-2ST 30 Angle (12.00) (12.00) W (AAUA-15) AARW-15AN W (AAUA-2) AARW-2AN AARP-2AN See A-51 Incandescent Factory Sealed Luminaire Classified Area Suitability page for suitability of specific fixtures. Add suffix -G to catalog number for optional guard. Shaded area indicates pendant mount is suitable for Class I, Group A in addition to other applicable area suitabilities. 630
12 For Group A and B Locations. Explosionproof NEC/CEC For Group A and B: Class I, Division 1 and 2, Groups A, B, C, D Mounting Hoods Pendant Type Hub Size (Inches) Catalog Number One Hub, Rigid or Flexible Mounting 1/2 AAP-50 3/4 AAP-75 Ceiling Four Hubs, Three Close-up Plugs 1/2 AAC-50 3/4 AAC Short Bracket Two Hubs, One Close-up Plug 1/2 AASB-50 3/4 AASB-75 Fixture Units Globe and Ring Assembly Aluminum Guards Description Catalog Number W AAUA-15 PS W PS-30 AAUA W (AAUA-15) AAGLA W (AAUA-2) AAGLA W (AAUA-15) AAGUA W (AAUA-2) AAGU-2 Medium Base Lamp Socket W (AAUA-15) AASPA W (AAUA-2) AASPA-22 Connection Block Fits all A-51 and AA-51 mounting hoods W VPT-7 Group A pendant mount only. 631
13 For Group A and B Locations. Explosionproof NEC/CEC For Group A and B: Class I, Division 1 and 2, Groups A, B, C, D Dimensions in Millimeters (Inches) (4.75) (4.69) 9.7 (0.38) (5.38) 85.9 (3.38) 9.7 (0.38) 66.8 (2.63) (.31) Size (Watts) Pendant Ceiling Short Bracket A B C A B C A B C (13.69) (14.75) (13.13) (13.69) (7.06) (8.81) (16.50) (17.56) (15.94) (16.50) (7.06) (8.81) (15.00) (16.00) (14.44) (15.44) (9.50) (10.38) 632
14 For Group A and B Locations. Explosionproof Photometric data shown here is based on a 200 watt type PS-25 lamp, and is representative of the performance for A-51 incandescent fixtures (Groups A and B). For candlepower values of fixtures with other lamps, use the following multipliers: 150 W (PS-25) 0.70; and 300 W (PS-25) 1.6. To determine candlepower values of fixtures with a guard, multiply by value shown with each curve. NEC/CEC For Group A and B: Class I, Division 1 and 2, Groups A, B, C, D Photometric Data Effective Floor Cavity Reflectance (Rfc) is 20% (No Reflector) % Ceiling Rcc (7.13) % Walls Rw ROOM CAVITY RATIOS (14.00) Effective Floor Cavity Reflectance (Rfc) is 20% (No Reflector) % Ceiling Rcc % Walls Rw ROOM CAVITY RATIOS (11.16) 633
FLUORESCENT/AREA: NEC/CEC EXPLOSIONPROOF. Applications. Illustrated Features
Applications Ideal for use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners; in refineries; and in other process areas where ignitable vapors, dust, moisture
Class II, Division 1 and 2, Groups E, F, G Class III CSA 4X
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured, and in other areas where ignitable vapors, dust, moisture and corrosive
Applications. Illustrated Features. Certifications and Compliances
Stylmaster Incandescent Luminaires NEC: CSA: V Class II, Division 1 and 2, Groups E, F, G Class III Enclosure 4X Lighting Lighting: Area Incandescent Applications Enclosed and gasketed lighting fixtures
Baymaster HL LED Luminaire High Bay for Hazardous Locations
Class I, Division, Group A, B, C, D Class I, Zone, Group IIC Class II, Division &, Group E, F, G Zone and Group IIIC Zone Group IIIB Applications Enclosed and gasketed fixtures suitable for use in: A wide
AVP SERIES Aluminum Lighting for Hazardous and Severe Environments
AVP SERIES Aluminum Lighting for Hazardous and Severe Environments A V P Class I, Division 2, Groups A, B, C & D Zone 2, Group IIA, IIB, IIC UL 844 Hazardous Locations UL 1598A Marine Outside Type CUL
Cl. I, Div. 1, Group B (with suffix GB), C, D Cl. I, Zone 1, Group IIB + H2
EVLS Hazard Gard A compact, affordable, explosionproof luminaire that has the best overall temperature performance ratings in its class! Eaton's Crouse-Hinds EVLS Hazard Gard is perfect as a general area
Baymaster LED Luminaire High Bay for Hazardous Locations
Class I, Division, Group A, B, C, D Class I, Zone, Group IIC Class II, Division &, Group E, F, G Zone and Group IIIC Zone Group IIIB Applications Enclosed and gasketed fixtures suitable for use in: A wide
EVLP Low Profile Hazard Gard (H.I.D.) Luminaires
EVLP Low Profile (H.I.D.) Luminaires Medium and Cl. I, Div. 1, Groups B (GB suffix), C, D Cl. I, Zone 1, Groups IIB + H2 (with suffix GB), IIB, IIA Cl. II, Div. 1, Groups E, F, G; Class III Marine & Wet
Mercmaster LED Low Profile Luminaires with Emergency Battery Backup Enclosed and Gasketed Fixtures
Class I, Division, Groups A,B,C,D Class I, Zone, Group IIC Zone, Group IIIC Class II, Division, Groups F,G Applications Enclosed and gasketed fixtures suitable for use in: A wide range of industrial, chemical
Industrial Mercmaster LED Generation 3 Series Luminaires For Ordinary Locations
Industrial Mercmaster LED Generation Series Luminaires Applications Powerful, efficient weatherproof lighting suitable for use in: Warehouses Storage facilities Machine shops Receiving areas Manufacturing
Incandescent Lighting: Enclosed and Gasketed
Incandescent Lighting: Enclosed and Gasketed 2-1 Page Description 2-11 Stylmaster Enclosed and Gasketed Incandescent ixtures 2, 3 eatures 4 Technical Data 5,6 ixture Assemblies 7 Mounting Hoods and Cast
BVP SERIES Brass Lighting for Marine and Hazardous Environments
BVP SERIES Brass Lighting for Marine and Hazardous Environments Class I, Division 2, Groups A, B, C & D Zone 2, Group IIA, IIB, IIC UL 844 Hazardous Locations UL 1598A Marine Outside Type NEMA 3, 4, 4X
AGUB Instrument and Meter Enclosures Explosionproof, Dust-Ignitionproof Furnished with aluminum body and solid or window cover.
AGUB Instrument and Meter Enclosures Furnished with aluminum body and solid or window cover. Class I, Division 1 and, Groups B, C, D Application To pull or splice wires and/or to mount and enclose electrical
Description Cast Device Box, Height Inch; Width 2.81 Inch; Depth 2.69 Inch; Capacity 25 Cu Inch; 1 Gang; 2 Hub(S); Hub Location End;
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1100 1G Mall Box Appleton/Oz Gedney Catalog Number 1100 Manufacturer Appleton/Oz Gedney Description Cast Device Box, Height
10 Hazlux Lighting US Brochure
0 Hazlux Lighting US Brochure Area lighting Hazlux 3 series Safe, durable, and now available with LED technology for superior energy efficiency, Thomas & Betts Hazlux products are the brand specifiers
EVLS Hazard Gard. Compact & Rugged, Explosionproof Luminaire. High-Pressure Sodium Metal Halide Pulse Start Metal Halide
Compact & Rugged, Explosionproof Luminaire Class I, Division 1, Groups B (with suffi x GB), C & D Class I, Zone 1, Group IIB + H 2 (with suffi x GB) Class II, Class III & Simultaneous Presence Wet locations
Areamaster Generation 2 HL LED Luminaire Floodlight for Hazardous Locations
Areamaster Generation HL LED Luminaire Class I, Division, Groups A, B, C, D Class I, Zone Group IIC Class II, Division and, Groups E, F, G Zone and Group IIIC Zone, Group IIIB Type R,, X, IP66/67 Applications
Class 1 Division 2 Fluorescent Light - 2 Foot 3 Lamp - Corrosion Resistant Requirements
Class 1 Division 2 Fluorescent Light - 2 Foot 3 Lamp - Corrosion Resistant Requirements Part #: HALP-24-3L Made in the USA The Larson Electronics HALP-24-3L Hazardous Area Fluorescent Light Fixture is
commercial and industrial fittings: cast DEVICE BOXES Applications Illustrated Features
UNILETS for use with Threaded Rigid Conduit and IMC. All Device Boxes have Construction. Furnished with Internal Ground Screw. Applications Accommodate wiring devices such as switches and receptacles.
FSK1VDRA 1G Al DPLX RCPT CVR
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FSK1VDRA 1G Al DPLX RCPT CVR Appleton/Oz Gedney Catalog Number Manufacturer Weight per unit Product Category FSK1VDRA
Industrial Areamaster Generation 2 HL LED Luminaire Floodlight for Ordinary Locations
Industrial Areamaster Generation HL LED Luminaire Type R,, X Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production facilities Warehouses Processing
Class 1 Division 2 Fluorescent Light - 4 foot 2 lamp - UV bulbs - Glass Lens
Class 1 Division 2 Fluorescent Light - 4 foot 2 lamp - UV bulbs - Glass Lens Part #: HAL-48-2L-BL-UV Made in Texas The Larson Electronics HAL-48-2L-BL-UV Hazardous Location Ultraviolet Fluorescent Light
AMLED Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
Applications Features 2 Standard Materials Standard Finishes Floodlight High Bay Certifications and Compliances ATEX/IECEx Certification See Table on following page See Table on following page EURASEC
AERODOME PARKING/ROADWAY (TYPE III)
SIDE-ARM MOUNT AERODOME PARKING/ROADWAY (TYPE III) AVV30-20 Lampholder Optic Housing Seamless, die-cast aluminum Reflector Segmented aluminum sheet with highly efficient finishes Lamp Lens High impact,
COMMERCIAL AND INDUSTRIAL FITTINGS: CAST DEVICE BOXES. Applications
Blank Bodies for Brazed Hubs UNILETS for Use with Threaded Rigid Metal Conduit and IMC. Available with Hub Sizes from 1/2 through 1-1/2 (Union 1/2 through 1-1/4 ). Furnished with Internal Ground Screw.
EPL-48-1L Surface Mount Explosion Proof, Waterproof Fluorescent Lights -Paint Booth, Rigs - 1 Lamp -
EPL-48-1L Surface Mount Explosion Proof, Waterproof Fluorescent Lights -Paint Booth, Rigs - 1 Lamp - Part #: EPL-48-1L Page: 1 Made in Texas The Larson Electronics EPL-48-1L Explosion Proof Fluorescent
Explosion Proof Fluorescent Ultraviolet Light - Class 1 & 2-4' 2 lamp - Paint Booths, Rigs, Marine
Explosion Proof Fluorescent Ultraviolet Light - Class 1 & 2-4' 2 lamp - Paint Booths, Rigs, Marine Part #: EPL-48-2L-UV Made in the USA The Larson Electronics EPL-48-2L-UV Explosion Proof UV Fluorescent
Atlantic LED Exit and Emergency Light AI EECXERB1
tlantic LE Exit and Emergency Light I EECXER1 Illumination: Twin djustable Light Heads LEs Have 25+ Year Life Electrical: utomatic Low Voltage isconnect Fully utomatic Operation Push to Test Switch 120-277V
PRELIMINARY. 2700K, 3000K, 3500K, 4000K, Static Red, Static Green, Static Blue, Static Amber
SPECIFICATION Line voltage LED, High Performance Facade and Flood Lighting Ideal for lighting facades, structures, bridges Industry leading center beam candlepower with optics Integral power (line voltage
CUSTOM CORD PENDANT CATALOG
barn light CUSTOM CORD PENDANT CATALOG WHY CHO OSE BARN LIGHT CUSTOM FIXTURES? Made in USA All of our custom fixtures are crafted in our 50,000-square-foot, Florida-based manufacturing facility. Completing
4000 Watt - Metal Halide - Three Stage Light Tower - 30 Feet
4000 Watt - Metal Halide - Three Stage Light Tower - 30 Feet Part #: LM-30-3S-4X1000W Page: 1 Made in the USA The LM-30-3S-4X1000W Light Tower from Larson Electronics is a 30 foot extendable light tower
1000 Watt Metal Halide Light - Hot Restrike - Multi-tap Ballast - Spot or Flood
1000 Watt Metal Halide Light - Hot Restrike - Multi-tap Ballast - Spot or Flood Part #: HID-22SL-HR The HID-22SL-HR 1000 Watt Metal Halide Light from Larson Electronics provides operators with the intensity
DuroSite Series LED High Bay for Indoor and Outdoor Industrial Applications. Patent Pending
Patent Pending DuroSite Series LED High Bay for Indoor and Outdoor Industrial Applications DuroSite Series LED High Bay Features & Benefits L70 rated for >100,000 hours @ 45 C ambient 5 year full performance
S u n V a l l e y L i g h t i n g S I G M ATM PATENT PENDING
S u n V a l l e y L i g h t i n g TM S I G M A PATENT PENDING S I G M A TM I N N O V A T I O N FORM The SIGMA is a traditional design luminaire that incorporates modern lighting specifications. The lantern-style
Novato Ring - Pendant
Novato Ring - Pendant AIP11997 72 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION A cornerstone of our luminous forms collection, Novato Ring is renowned for its even, three-sided illumination, versatility,
Nemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4
I N D U S T R I A L rev. A- INSTALLATION INSTRUCTIONS *PENDING* E77827 E77827 APPLICATION MR3 & MR6 Luminaires are suitable for use in the following areas as defined by the National Electrical Code (NEC)
Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB)
L VMV Series 50 175W Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl. II, Groups E, F, G, Cl. III & Simultaneous Presence
Metal Halide - Ceramic, Medium Base ED17. H050 50w H070 70w H w H w HPS - Medium Base ED17
SILL 5 Yoke Mount Project: Type: Qty: S5 Series Mounting Reflector Lamping Lamp Color Finish _ Options Pole Series Height Finish Options Voltage Series S5 SILL Cityliter 5 Yoke Mount Mounting Reflector
Beam Pattern. Lamping C K (coated lamp) NOL Lamp not included C737 NOL. Lamp not included K (clear lamp) NOL
SILL PR022 Projector Floodlights Project: Type: Qty: PR022 Series _ Beam Pattern _ Lamping _ Lamp Color _ Mounting _ Finish _ Voltage Lens Accessories Options Series Beam Pattern Lamping Lamp Color Mounting
Novato Ring - Pendant
Novato Ring - Pendant AIP11848 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION A cornerstone of our luminous forms collection, Novato Ring is renowned for its even, three-sided illumination, versatility,
Exterior Decor LIGHTING. Bulkheads. architectural lighting. See our Bulkhead family sizes. Over 50 styles to choose from.
LIGHTING FC Lighting is known for it s family-size products and custom manufacturing capabilities, both are unique in adding vslue to our customers. Specification is made easier choosing various sized
INDIRECTTM. Cubic INDIRECT INDIRECT/CUBIC INDIRECT
INDIRECTTM Cubic INDIRECT TM A R C H I T E C T U R A L A R E A L I G H T I N G INDIRECT/CUBIC INDIRECT 1 to create, inspire and nurture EXCELLENCE in each other ENERGY EFFICIENCY The light sources employed
OUTDOOR TRACK (PATENT PENDING)
1.91" (4.9cm) Micro Track Head Finish Micro Track Head Finish Features & Benefits Offers the flexibility of track lighting in an Exterior environment Uses 12VAC low voltage wiring without the need for
Commercial/Retail Lighting
Commercial/Retail Lighting Decorative luminaires for commercial and retail applications Exeter Series Simcoe Series 2 Juno Lighting Group Commercial/Retail Lighting Commercial and Retail Lighting Retail
INSTALLATION INSTRUCTIONS
SHD TO REMOVE HOOD (SHD) ) LOOSEN (4) SOCKET HEAD SCREWS AND RETAINING RINGS FROM HOOD (SHD). ) REMOVE HOOD AND. 3) DISCONNECT WIRES. 3 4) REMOVE REFLECTOR BY LOOSENING (4) PHILIPS HEAD SCREWS. 5) PLEASE
_ PR020 Series. Lamping. Color. SA Stake Mount K NOL Lamp not included. Single Pole Top Double Pole Top Triple Pole Top Quad Pole Top
SILL PR020 Projector Floodlights Project: Type: _ PR020 Series Beam Pattern _ Lamping _ Lamp Color _ Mounting _ Finish _ Qty: _ Voltage Lens Accessories Options Series Beam Pattern Lamping Lamp Color Mounting
Steps for Selecting the Proper Transformer
SECTION I Page 4 Steps for Selecting the Proper Transformer SINGLE PASE LOADS 1. Determine electrical load A. Voltage required by load. B. Amperes or KVA capacity required by load. C. Frequency in z (cycles
GE Lighting. High Bay Lighting. (ABV-Series) imagination at work
GE Lighting Albeo LED Luminaire High Bay Lighting (ABV-Series) imagination at work Product Features Albeo continues to build on the groundbreaking ABH-Series high bay LED luminaire with its latest high
Basics Series Retrofit LED. Economical 4", 5" and 6" Downlight Trims
Basics Series Retrofit LED Economical 4", 5" and 6" Downlight Trims Saves up to 85% in energy costs when compared to equivalent incandescent light source 2 Juno Lighting Group Juno Basics Series Retrofit
SECTION LIGHTING FIXTURES AND LAMPS
SECTION 16511 LIGHTING FIXTURES AND LAMPS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 09200 - Metal Studs, Lath, Suspension Ceiling, Plaster, and Stucco. 2. 09510 - Acoustical Ceilings. 3. 16112
T S 15KVA 1PH 240/480 Transformer
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T2535173S 15KVA 1PH 240/480 Transformer Acme Electric Catalog Number Manufacturer Description Weight per unit Product
VG Series LED Parking Structure Luminaire
VG Series LED Parking Structure Luminaire Used for Pendant, Hook & Cord, Junction Box, Direct and Trunnion Mounts Reinventing LED Parking Structure Lighting ENHANCED DRAMATIC PLEASING QUICK AND RELIABLE
Bullet EL Volt Die-Cast Aluminum, PAR38 Incan. / Halogen / R40 Incan. revision 8/15/11 el220.pdf
Catalog number: and Finish Options: See page 2 ing Options: See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications Housing: Die-cast low copper aluminum. Swivel: Die-cast aluminum with locking teeth
Series 5 Die Cast Aluminum Conduit Outlet Bodies, Covers and Gaskets
Eaton's Crouse-Hinds Series 5 die cast copper-free aluminum conduit bodies, covers and gaskets are available for use with rigid or EMT conduit (with set screw). Conduit bodies are available in trade sizes
Cree Edge Series LED Canopy Luminaire
Cree Edge Series LED Canopy Luminaire Product Description The Cree Edge Canopy Luminaire provides a slim, low profile solution for easily mounting below the canopy deck. Built with rugged cast aluminum,
RSB-RCS/L SERIES The RSB-RCS/L Series rectangular shoebox is offered in a variety of lighting distributions with sharp cutoff to meet the challenging demands of today s site lighting projects. Fixture
Catalog Number LSBT. Example: LSBT6C8T5WD1-BZ QMB. Optics. Type II Type III Type IV Type IV Automotive Type V Medium Type V Wide T2 T3 T4 T4A T5M T5W
DesignLights Consortium Qualified. Please go to www.designlights.org for the current Qualified Products List. Further details about qualified models may be found under Family Models. Catalog Number Project
Decorative luminaires for open ceiling commercial and retail applications. Indy Commercial/Retail Lighting
Commercial & Retail Lighting Decorative luminaires for open ceiling commercial and retail applications Indy Commercial/Retail Lighting I II Indy Indy Commercial/Retail Lighting Lighting Commercial and
Introducing the SIGNATURE SERIES
Introducing the SIGNATURE SERIES Function Meets Form Using the ancient artform of metal spinning, Signature Series fixtures are available in your choice of base metals: aluminum, brass, copper or galvanized
CRS8 Quick Release 8W LED Gravity-Fit Pendants
Catalog No. CRS8 Quick Release 8W LED Gravity-Fit Pendants Type Project Specifications/Features Fixture High performance, eco-friendly 8W LED pendant delivering 750+ lumens; matching the output and uniformity
IL 3525 Series. LED Industrial Lighting. Advantages of IL3525. Application
LED Industrial Lighting Advantages of IL3525 Proprietary Reflector and Optics enabling glare-free uniform lighting for all working environments. Eliminating the need for costly and fragile plastic lenses
5G350 Nominal 33W 5G530 Nominal 48W 5G700 Nominal 64W 5G105 Nominal 97W 5G140 Nominal 126W K K. 1 DM or HL only. Cannot be combined.
Project: Type: Qty: BLL _ Series Mounting Optics Light Engine CCT Finish Voltage Options _ Pole Series Height Finish Pole Options Series Mounting Optics Light Engine CCT Finish Voltage Options BLL Beta
Hazardous area LED lighting Pauluhn Summit linear LED luminaires. Pauluhn Summit. Linear, high bay LED luminaires designed for hazardous areas
Hazardous area lighting Pauluhn linear luminaires Pauluhn Linear, high bay luminaires designed for hazardous areas Pauluhn Safe. Reliable. Efficient. Featuring the industry's broadest range of luminaires
Decorative. PS (conical) Vetro Pendants
Decorative PS (conical) Project: Location: Cat.No: Type: Lamps: Notes: Qty: Vetro Pendants Power Heads Two-piece cast and machined aluminum outer housing contains electrical components. Hand-blown triplex
Slot 1:10 Scale 1-1/8" (29mm) A G H J. Slot Depth (see chart) (see chart) C K. Return Lip. (see chart)
Lighting the all T5 Fluorescent T8 Fluorescent 1:8 Scale 5-7/8" (149mm) 3-3/4" (95mm) A B C D E F Length (see chart) A G H J F C K Slot 1:10 Scale 1-1/8" (29mm) Slot Depth (see chart) Return Lip (see chart)
GE Lighting. Albeo LED Luminaire. High Bay Lighting. (ABV-Series) imagination at work
GE Lighting Albeo LED Luminaire High Bay Lighting (ABV-Series) imagination at work Product Features Albeo continues to build on the groundbreaking ABH-Series high bay LED luminaire with its latest high
Visit our web site:
Compliance and Applications ICAO Annex NATO STANAG BS: Part, inset fixtures IEC: Category I, II and III all weather operation airfield lighting systems. Our ZA medium intensity, omnidirectional fixture
ELG QL Induction Series Element Glass High Bay, watt QL
Type No. Catalog No. Job. Name ELG QL Induction Series PPLICTIONS pplications include large and small retail facilities, lobbies, conference rooms, auditoriums and other commercial and light industrial
HSAF Era Stepped Aluminum Fluted Pole revision 10/6/15 kl_hasf_spec.pdf
Type: Job: Catalog number: Approvals: / / / / / / Pole Cat. No. Mounting Arm Drilling Pole Finish Optional Optional Pole Optional Duplex Option Base Cove Top Cap/Finial Receptical Specifications Conduit
CYL6 6" Integrated LED Indoor and Outdoor Cylinders
Specifications/Features Specification grade 6" diameter aluminum housing for indoor and outdoor applications. Four mounting options available: ceiling, flexible cable, pendant, or wall mount. Wall mount
HBL Series High Bay LED
HBL Series High Bay LED At Big Ass Solutions, we've put our right and left brains together to produce lighting fixtures that leave the competition in the shadows. Our Big Ass Light LEDs are conceived and
PENDANT INDIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY 125 lm/ft 56 W 89 lm/w 1 lm/ft 45 W 9 lm/w 75 lm/ft 34 W 88 lm/w 5 1/2" *REFER TO PHOTOMETRIC DATA SECTION FOR EXACT VALUES
Interior Accent. Lighting. Kaleidoshade 2
Interior Accent Lighting The presents new opportunities for illuminating retail or commercial building interiors having large open wall space. Because of its linear fluorescent design, lighting is more
(SMS MOUNT SHOWN) Prefix Mounting Optics Lamp Wattage Length Volts Finish Options & Accessories 14W 21W 28W 2' 3', 6' 4', 8' T5HO 2' 3', 6' 4', 8'
(SMS MOUNT SHOWN) Prefix Mounting Optics Lamp Wattage Length Volts Finish Options & Accessories SMS - surface mount single fixture SMM - surface mount multiple fixtures EAS - extended arm single fixture
GE Lighting. Albeo LED Luminaire. Modular High & Low Bay Lighting. (ABH3 - Series) imagination at work
GE Lighting Albeo LED Luminaire Modular High & Low Bay Lighting (ABH3 - Series) imagination at work Product Features The award winning Albeo ABH-series LED Luminaire utilizes innovative heat-sinking and
OPTIMAL PERFORMANCE REFLECTOR
OPTIMAL PERFORMANCE REFLECTOR ELECTRICAL DATA COMMON TO ALL GENERATORS Input Voltage 0V-77V EMI/RFI Compliance FCC Part 8-A Voltage Fluctuation Tolerance ±0% Sound Rating Class A Input Frequency 0/60 Hz
CY3 3-1/2" Integrated LED Indoor and Outdoor Cylinders
Integrated LED Indoor and Outdoor Cylinders Specifications/Features Specification grade diameter aluminum housing for indoor and outdoor applications. Six (6) mounting options available: ceiling, flexible
HD4 Cans. Features Aperture Shape. Dimensions and Weight. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 4.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Cans Eaton Lighting Catalog Number Manufacturer Description Weight per unit Product Category Features Aperture Shape Ceiling
Alkco is a Philips group brand
Alkco is a Philips group brand ERAcare is an integrated lighting solution for the patient room environment. It fulfills the requirements for Examination, Reading and Ambient lighting while also simplifying
High Performance Area/Site Lighting. Cimarron DIE CAST ARCHITECTURAL LUMINAIRE. Reflectors. High Performance Reflectors
High Performance Area/Site Lighting Cimarron Reflectors Cimarron With a contemporary, clean design and full cutoff performance, Cimarron luminaires deliver more light where you need (and want) it. Each
VEK1-LED26 Multi-pupose fixture
W E T L O C ATI O N Y E A R W A R R A N T Y VEK1-LED26 Multi-pupose fixture The VEK1-LED26 is an adjustable multi-purpose fixture that replaces traditional wall packs and floods. The head can be aimed
RL630-14W-120V-DIM-FL / RL607-14W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component
RL630-14W-120V-DIM-FL / RL607-14W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component UNIQUELY ENGINEERED FOR NEW AND EXISTING CONSTRUCTION The Elite Module LED has been engineered for
ELECTRICAL. Hertz 50/60 Input Current.7 -.3A. -20 C to +45 C Operating Temp. -4 F to +113 F. Power Factor > 0.9 THD. 1.5 (38.1mm)
LESTRA-18V1 UPLIGHT Lestra-18V1 is a mid-bay fixture that achieves high lumen output levels. Lestra s diffused light is free from shadows and breaks. The fixture has an anodized finish providing excellent
LEO Ellipsoidal Fixture
LEO Ellipsoidal Fixture Cord and Plug (shown bare end) Leviton s Enhanced Optics ellipsoidal spotlight breaks through the barriers and pitfalls commonly associated with new generation ellipsoidal reflector
PENDANT MOUNT - DIRECT
Project Type Louver Notes Flush Spotless Lens - down Glo Lens - up Glo Lens up and down PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY SHIELDING 1000 lm/ft 9.9 W/ft 97
NOT SO SCARY LIGHTING MATH
NOT SO SCARY LIGHTING MATH Methods to Calculate Light Point-by by-point Direct Illumination from a Fixture or Lamp You need. Photometry Distances from Fixture or Lamp Lumen Method Average Light Level in
HOLH x
PROUDLY MADE Catalog Number INNOVATION IN ILLUMINATION HOLH SERIES High Output LED Linear High Bay Project Type FEATURES & SPECIFICATIONS APPLICATION The high lumen output luminaire is designed to be a
OPTX PRECISION GUIDED LIGHTING TECHNOLOGY
OPTX PRECISION GUIDED LIGHTING TECHNOLOGY Based on the principles of highly classified missile defense research used to guide missiles with pinpoint accuracy, OptX is the heart of the Hyperion Bollard
Olivio Grande LED Candelabra Pole Top
Date: Customer: Project: Type: Qty: Olivio Grande LED Candelabra Pole Top Order Code: OLGL - - - - - - - Pole Order Code: AT524 - - - Series Height Finish Options OLGL Series OLGL Olivio Grande LED Optics
PENDANT INDIRECT. Project. Type. Notes. Lumen/ft up: 1535 lm/ft Total Lumens: 6000 lm (for 4ft) Input Watts: 50.3 W (12.6W/ft) Efficacy: 119 lm/w
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 100up/0down at 800 lm/ft 800 lm/ft 33 W 102 lm/w 100up/0down at 1000 lm/ft 1000 lm/ft
SECTION MEDICAL AND SURGICAL LIGHTING FIXTURES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 55 71 MEDICAL AND SURGICAL LIGHTING FIXTURES SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph
Project: Type: Qty: QH2L. Series Optics Mounting Light Engine CCT Finish Voltage Option. Options QH2L 27 3 /8" 23 3 /16" 3 1 /2" O.D. Pole.
Series Optics Mounting Light Engine CCT Finish Voltage QHL Quadro H LED R R R3 R4 R5 Type I Type II Type III Type IV Type V Project: Type: Qty: QHL _ Series Optics Mounting Light Engine CCT Finish Voltage
Sienna Pendant Drop Lens PENDANT
Overview Aesthetically pleasing design with no visible screws and a dropped lens, sleek cross section for minimal appearance One piece extruded aluminum housing with integral driver Direct lighting only
Morris Products 53 Carey Road, Queensbury, NY 12804
Catalog Number 71462 UPC Number 60198671462 Description LED Vandal Resistant Canopy Light 40W Voltage: 120/277 Features Corrosion Die Cast Aluminum Housing Prismatic Polycarbonate Lens Superior Architectural
VM5 CATALOG ORDERING LOGIC
KILLARK VM5 CATALOG ORDERING LOGIC CertiLite Catalog Number Logic; 200- High Wattage (Mogul Base) HID Fixtures VM 0 0 00 0 0 0 00 0 (NRn) 00 Series Constant Optic Thread Size 5 7 Lamp Type S HPS (200,,,
R L L D R L M S T A N D A R D D O M E
R L L D R L M S T N D R D D O M E RLLD - STNDRD DOME DIMENSIONS C Fixture Height () Diameter (B) Neck (C) Weight (lbs./kg) SD 100 8-1/4" (210mm) 12" (305mm) 2.5 (1.13kg) SD 150 9-1/2" (241mm) 14" (356mm)
RECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 4 5/32 IC culus Listed Type I.C. ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS DIRECT
DECORATIVE. Prismasphere
78 DEORTIVE Prismasphere D EORTIVE Product atalog Prismasphere The Prismasphere Series is designed to complement exterior landscape and site architecture by bringing both historically significant and classic
HPV Luminaire High Performance Vertical Lamp Luminaire Featuring CosmoPolis and MasterColor Elite Electronic Systems
HPV Luminaire High Performance Vertical Lamp Luminaire Featuring CosmoPolis and MasterColor Elite Electronic Systems The Philips Gardco HPV High Performance Vertical Luminaire is the latest in high-wattage,
Lowlighter KLV Volt Die-Cast Brass, MR16 Halogen revision 2/25/14 kl_klv275_spec.pdf. Ravenna TM. Specifications. Approvals: Type: Job:
Catalog number: and Finish Options: See page 2 : See pages 3-5ˇ Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast brass with die-cast cover, stainless steel fasteners and stainless steel