ISM-PRO SOFTWARE DIGITAL MICROSCOPE OPERATION MANUAL

Size: px
Start display at page:

Download "ISM-PRO SOFTWARE DIGITAL MICROSCOPE OPERATION MANUAL"

Transcription

1 MN-ISM-PRO-E ISM-PRO SOFTWARE DIGITAL MICROSCOPE OPERATION MANUAL

2 Desription Clik Next. As the following piture: ISM-PRO softwre is for ISM-PM00SA, ISM-PM600SA, ISM- PM60L digitl mirosopes. It ontins mny funtions, suh s tking piture, tking video, mesuring nd so on. Operting system: Windows XP, Vist, Win7. The elow tle shows reltionship etween mgnifition nd ury. ISM-PM00 ISM-PM600 ISM-PM60L Aury 0µm 5µm 0µm 8µm Mgnifition 450X 500X 550X 600X Aury 6µm 6µm 5µm 5µm Mgnifition 50X 00X 60X Mgnifition 50X 00X 50X 00X Aury 0µm 5µm 0µm Selet the I ept the terms of the liense greement, nd lik Next. As the following piture: Softwre Instlltion Note: When instlling the softwre, login omputer s dministrtor. Put ISM-PRO softwre dis into CD ROM, nd then lunh ISM- PROsetup.exe. As the following piture: 4 Clik Chnge, hnge the instlled pth if needed. Clik the Next. As the following piture

3 5 Clik Instll, run ISM-PRO Instll Shield Wizrd. As the following piture: 9 Selet No, not this time. Clik the Next. As the following piture: 6 Clik Finish, finish the softwre instlltion. 0 Selet Instll the softwre utomtilly (Reommended). Clik the Next. As the following piture: 7 8 After instlltion, softwre ion is shown on the desktop. Doule-lik the ion to run the softwre. Connet the mirosope to the omputer USB port, turn on the power of mirosope. The following piture will e shown on desktop. Clik Continue Anywy, nd then wit for seond. Clik Finish, finish instlltion. 4

4 Softwre Introdution Tke Piture Tke Video Video Setting Mesurement Setting Input to Exel Input to CAD Lnguge Snpshot Help Piture List Video List Mesurement Edge Detetion Mesurement Comprsion Undo/Redo Clirtion Zoom in 5 Input Opertion The piture n e sved s different file types, suh s Word, Exel nd CAD. Selet the funtion, lik Sve, sve the file. Note: If Mirosoft Offie Strter is instlled, the file nnot e sved s Exel. Tke Piture Tke piture y pressing the utton in the softwre. The piture ppers in the ottom olumn. Doule-lik the piture into Imge Proess. Right-lik the piture, the piture n e sved, deleted, et. Tke Video Set Frme rte, Time limit, Resolution. Clik OK, nd then tke video. The video ppers in the ottom olumn. Doule-lik the video into ISM-PRO Ply. Right-lik the video, the video n e sved, deleted, et. Frme Rte: The numer of imges disply per seond. The higher the numer of frmes ply per seond, the smoother the video plyk ppers to the user. Input to Exel 4 Video Setting Set Video Cpture Devie, Devie Setting, Video Properties nd Chnge Sve Pth. Mesurement Setting Set Line Type, Font nd Unit mm 5.0 R=0.96mm Input to CAD 5 6

5 Set Lnguge Set lnguge: English, Jpnese, Koren, Germn, Turkey, Portuguese, Chinese. When instlling the ISM-PRO softwre, it n e set the sme lnguge s operting system utomtilly. Snpshot Enle or disle snpshot funtion on the digitl mirosope. When using the utton on the mirosope to tke piture, the mirosope my shke nd the piture my e lurred. Help Clik Help, selet ISM-PRO Help, red user mnul. Selet ISM-PRO Updte, downlod the ltest softwre from wesite. Selet Aout ISM-PRO, hek softwre version nd opyright. Piture/Video List Clik, piture list is shown in the ottom side. Clik, video list is shown in the ottom side. Undo or Redo Clik, delete lst step. Clik, undo lst step. Clik, detet ll steps efore. Sle: Clik Sle, sle is shown in the interfe, lik it gin to eliminte sle. Note: Before using sle, do lirtion. Right-lik Funtion: There re severl funtions, s the following piture. d Cirle: Clik Cirle, onentri irles is shown interfe, lik it gin to eliminte onentri irles. in the Note: Before using irle, do lirtion. Cnel : End the urrent opertion. Cross Line: Clik Cross Line, ross line is shown in the interfe, lik it gin to eliminte ross line. e f Time: Clik Time, the urrent time is shown in the ottom of interfe, lik it gin to eliminte time. Formt : Selet photo formt, JPG or BMP. 7 8

6 Zoom in The prtil imge is mgnified through this window. You selet the points more preise with the help of this funtion. n Put the ojet under digitl mirosope, rotte mgnifition djustment, nd rotte fous djustment to fous the ojet. Press ny mesurement key to mke this window disply the imge where the mouse rrow is positioned. d Note: Plese lik ny mesurement key gin if you hve moved the ojet or hnged the mgnifition. You n mgnify the imge y liking left utton in this window nd liking right utton to reover. Move the mouse rrow to the trget site nd use the enter point of the window to selet points. 4 Clik key, hoose sle mrk in the left of interfe nd get point t the intersetion, then hoose sle mrk in the right of interfe nd get nother point t the intersetion with sme position like efore. Note: The distne of two sle mrk shoud e s long s possile. Clirtion In order to get the high ury, lirtion should e done efore mesurement or omprison. Put the ojet under digitl mirosope, rotte mgnifition djustment, nd rotte fous djustment to fous the ojet. Fous Adjustment Mgnifition Adjustment When the mgnifition is lrger thn 60X, selet the lirtion rule 0.mm for lirtion. When the mgnifition is less thn 60X, selet the lirtion rule mm for lirtion. 5 Input the ext vlue of line. Clik OK, the softwre will disply urte mgnifition. Remove the ojet. Put lirtion rule on the white side of white/lk plte, rotte fous djustment to fous it. 9 0

7 Notes: The sreen will disply prompt window in the lower right orner fter you lunhed the softwre. Mesure Length of Line or Distne Between Two Points Clik t the strt point, drw line to the end of line nd lik. Put result in the pproprite position. After lirtion, rotte fous djustment to fous the ojet. If rotting the mgnifition djustment, do lirtion gin. The softwre rememers the lst time lirtion results. If the mgnifition is the sme s the lst time, you need not do lirtion gin. Mesurement On-line Mesure Distne Between Point And Line Clik t the strt point, drw line to the end of line nd lik. Clik t the point. Put result in the pproprite position. Notes: Confirm to do lirtion efore doing mesurement. Mesure different ojets in sme mgnifition fter doing lirtion. After lirtion, rotte fous djustment to fous the ojet. If rotting the mgnifition djustment, do lirtion gin. The mesurement tool is t the upper-right of sreen. Mesure Distne Between Two Prllel Lines Clik t the point of one line, drw line to the other line nd lik, mke sure referene lines nd prllel lines in superposition. Put result in the pproprite position.

8 4 Mesure Length of Continuous Line d Clik t the strt point, drw line to the seond point nd lik. Put result in the pproprite position. Drw line to the third point nd lik Doule lik t the end point. A: Are R: Rdius G: Girth 7 Mesure Rdius, Angle, Length of Ar Choose the first point on the Ar nd lik. Choose the seond point on the Ar nd lik. Choose the third point on the Ar nd lik. d Put result in the pproprite position. 5 T: Totl length of ontinuous line. Mesure Are of Retngle Clik t the orner of retngle. Drw retngle to the ross orner nd lik. Put result in the pproprite position. R: Rdius Ar: Length of r A: Are W: Length H: Width 8 Mesure Angle With Three Points Clik t point of one side of the ngle, drw line to ross point nd lik. Drw line to point of nother side of the ngle nd lik. Put result in the pproprite position. 6 Mesure Rdius, Girth And Are Of Cirle d Choose the first point on the irumferene nd lik. Choose the seond point on the irumferene nd lik. Choose the third point on the irumferene nd lik. Put result in the pproprite position. 4

9 9 Mesure Angle With Two Lines Clik t point of one side of the ngle, drw line to the seond point of this side nd lik. Clik t point of the other side of the ngle, drw line to the seond point of this side nd lik. Put result in the pproprite position. 0 Mesure Distne Between T wo Cirles Clik t point of the first irle. And drw irle just like Mesure Three Points Cirle. Put result in the pproprite position. Drw the seond irle like the first one. d Put result in the pproprite position. Add Numer With Cirle Add Text A I Input text. You n hnge the font style, lik Font. Clik OK, put words in the pproprite position Detet Line Automtilly And Clulte Length Automtilly serhes the highest lk-white ontrst vlue y mens of imge proessing. You n selet multi points then lik the right utton to disply the length of line. Put result in the pproprite position. Detet Cirle Automtilly And Clulte Are, Rdius, Girth Automtilly serhes the highest lk-white ontrst vlue y mens of imge proessing. You n selet multi points then lik the right utton to disply the result. A: Are, R: Rdius, G: Girth. Put result in the pproprite position. Detet Ar Automtilly And Clulte Rdius, Angle, Length Automtilly serhes the highest lk-white ontrst vlue y mens of imge proessing. You n selet multi points then lik the right utton to disply the result. R: Rdius, Angle, Ar: Length of r. Put result in the pproprite position. Detet Two Lines Automtilly And Clulte Distne Automtilly serhes the highest lk-white ontrst vlue y mens of imge proessing. You n selet two lines long the edges then lik the right utton to disply the distne. Put result in the pproprite position. Detet Two Lines Automtilly And Clulte Angle Automtilly serhes the highest lk-white ontrst vlue y mens of imge proessing. You n selet two lines long the edges then lik the right utton to disply the ngle. Put result in the pproprite position. 5 6

10 Piture Mesurement Comprison Tke piture, doule-lik the piture into Imge Proess. In order to get high ury, you n selet piture mesurement. Mesurement on-line is more onvenient. Notes: Confirm to do lirtion efore doing mesurement. Mesure different ojets in sme mgnifition fter doing lirtion. After lirtion, rotte fous djustment to fous the ojet. If roting the mgnifition djustment, do lirtion gin. Mesurement Tool : Funtions in Imge Proess re the sme s mesurement on-line. Notes: Confirm to do lirtion efore doing omprison. Mesure different ojets in sme mgnifition fter doing lirtion. After lirtion, rotte fous djustment to fous the ojet. If rotting the mgnifition djustment, do lirtion gin. Crete line, ngle or irle with disired size to e ompred with workpiees. Crete Line Clik t point, drw line nd lik. Input the length of line, lik OK. Press the hed of the line nd hold the mouse, move the mouse, djust the line position. Press the til of the line nd hold the mouse, move the mouse, djust the line length. Hed Til Edge Detetion Mesuring Tools : Find the imge edge utomtilly. The working methods re sme to mesurement on-line. Crete Angle Input ngle vertex oordintes, lik OK. Press the ngle vertex nd hold the mouse, move the mouse, djust the ngle position. Press the ngle edge nd hold the mouse, move the mouse, djust the ngle. 7 8

11 Imge Proess Doule-lik the piture into Imge Proess. Crete Cirle With Tolerne Input rdius nd tolerne vlues, lik OK. Press the enter of irle nd hold the mouse, move the mouse, djust the tolerne irle position. Imge Proess Clik to mke imge proess tool(s elow piture). Pint Clik to mke pint tool(s elow piture). 9 0

12 5 Edge Detetion Edge detetion n drw the outline of the imge utomtilly. Lol edge detetion n drw the outline of the seleted re. Overll edge detetion n drw the outline of the imge. 6 Lol Edge Detetion Selet, Delete, Move Overll Edge Detetion Clik, selet the element, the element turns red. Clik, delete it. Clik, move it nd lik.

McAfee Network Security Platform

McAfee Network Security Platform M-2750 Sensor Quik Strt Guide Revision B MAfee Network Seurity Pltform This Quik Strt Guide explins how to quikly set up nd tivte your MAfee Network Seurity Pltform M-2750 Sensor in in-line mode. Cling

More information

McAfee Network Security Platform

McAfee Network Security Platform M-6030 Sensor Quik Strt Guide Revision B MAfee Network Seurity Pltform This Quik Strt Guide explins how to quikly set up nd tivte your MAfee Network Seurity Pltform [formerly MAfee IntruShield ] M-6030

More information

Macroscopic and Microscopic Springs Procedure

Macroscopic and Microscopic Springs Procedure Mrosopi nd Mirosopi Springs Proedure OBJECTIVE Purpose In this l you will: investigte the spring-like properties of stright wire, disover the strethiness of mteril, independent of the size nd shpe of n

More information

mac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v

mac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v mc profile Mcintosh 10.5-10.10 Configurtion Guide Adoe Photoshop CS/CC Swgrss Virtuoso SG400/SG800 v20150427 Configurtion Guide - Photoshop CS/CC Swgrss SG400/800 Before proceeding, ensure the correct

More information

English Printed in Taiwan XG

English Printed in Taiwan XG COVER 1-4 C M Y K English Printed in Tiwn XG0091-001 Congrtultions on choosing our product! Thnk you very much for purchsing our product. To otin the est performnce from this device nd to ensure sfe nd

More information

Installation manual. Daikin Altherma LAN adapter BRP069A61 BRP069A62. Installation manual Daikin Altherma LAN adapter. English

Installation manual. Daikin Altherma LAN adapter BRP069A61 BRP069A62. Installation manual Daikin Altherma LAN adapter. English Instlltion mnul Dikin Altherm LAN dpter BRP069A6 BRP069A6 Instlltion mnul Dikin Altherm LAN dpter English Tle of ontents Tle of ontents Aout the doumenttion. Aout this doument... Aout the produt. Comptiility....

More information

WORKSHOP 15 PARASOLID MODELING

WORKSHOP 15 PARASOLID MODELING WORKSHOP 15 PARASOLID MODELING WS15-2 Workshop Ojetives Crete prsoli moel of tension fitting using numer of the prsoli tools in MSC.Ptrn WS15-3 Suggeste Exerise Steps 1. Crete new tse for the tension fitting

More information

Probability and Statistics P(A) Mathletics Instant Workbooks. Copyright

Probability and Statistics P(A) Mathletics Instant Workbooks. Copyright Proility nd Sttistis Student Book - Series K- P(A) Mthletis Instnt Workooks Copyright Student Book - Series K Contents Topis Topi - Review of simple proility Topi - Tree digrms Topi - Proility trees Topi

More information

Resistors, Current and Voltage measurements, Ohm s law, Kirchhoff s first and second law. Kirchhoff s first Objectives:

Resistors, Current and Voltage measurements, Ohm s law, Kirchhoff s first and second law. Kirchhoff s first Objectives: EE -050 Ciruit L Experiment # esistors, Current nd Voltge mesurements, Ohm s lw, Kirhhoff s first nd seond lw. Kirhhoff s first Ojetives: Slmn in Adul Aziz University Eletril Engineering Deprtment. Fmiliriztion

More information

Programming Guide. Neurostimulators for Chronic Pain. RestoreSensor, RestoreUltra, RestoreAdvanced, and PrimeAdvanced

Programming Guide. Neurostimulators for Chronic Pain. RestoreSensor, RestoreUltra, RestoreAdvanced, and PrimeAdvanced Progrmming Guide Neurostimultors for Chroni Pin RestoreSensor, RestoreUltr, RestoreAdvned, nd PrimeAdvned For use with SureSn MRI nd erlier non-suresn Neurostimultion Systems. Overview This guide desries

More information

Patterns and Algebra

Patterns and Algebra Student Book Series D Mthletis Instnt Workooks Copyright Series D Contents Topi Ptterns nd funtions identifying nd reting ptterns skip ounting ompleting nd desriing ptterns numer ptterns in tles growing

More information

McAfee Network Security Platform

McAfee Network Security Platform NS9300XC Sensor Quik Strt Guide Revision A MAfee Network Seurity Pltform This Quik Strt Guide explins how to quikly set up nd tivte your MAfee Network Seurity Pltform NS9300XC Sensor to e lod lned y MAfee

More information

Operation Manual. Addendum. Embroidery Machine. Product Code: 884-T13

Operation Manual. Addendum. Embroidery Machine. Product Code: 884-T13 Emroidery Mchine Opertion Mnul Addendum Product Code: 884-T13 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. ABOUT THIS MANUAL ABOUT

More information

Basic Embroidery. Chapter 5 COMBINING PATTERNS BEFORE EMBROIDERING PREPARING THE FABRIC SELECTING PATTERNS...

Basic Embroidery. Chapter 5 COMBINING PATTERNS BEFORE EMBROIDERING PREPARING THE FABRIC SELECTING PATTERNS... Chpter 5 Bsic Emroidery BEFORE EMBROIDERING... 196 Emroidery Step y Step...196 Attching Emroidery Foot W+ with LED pointer...197 Attching the Emroidery Unit...197 Aout the Emroidery Unit... 197 Removing

More information

McAfee Network Security Platform

McAfee Network Security Platform Revision D MAfee Network Seurity Pltform (M-8000 Quik Strt Guie) This Quik Strt Guie explins how to quikly set up n tivte your MAfee Network Seurity Pltform [formerly MAfee IntruShiel ] M-8000 Sensor in

More information

Multivariable integration. Multivariable integration. Iterated integration

Multivariable integration. Multivariable integration. Iterated integration Multivrible integrtion Multivrible integrtion Integrtion is ment to nswer the question how muh, depending on the problem nd how we set up the integrl we n be finding how muh volume, how muh surfe re, how

More information

Question Paper Wednesday 13 Thursday 14 January 2010

Question Paper Wednesday 13 Thursday 14 January 2010 KEY SKILLS INFORMATION AND COMMUNICATION TECHNOLOGY Level 3 ArtComp [KSI31] Question Pper Wenesy 13 Thursy 14 Jnury 2010 Do NOT open this Question Pper until you re tol to y the invigiltor THERE ARE THREE

More information

ABOUT THIS MANUAL ABOUT THIS MANUAL

ABOUT THIS MANUAL ABOUT THIS MANUAL ABOUT THIS MANUAL ABOUT THIS MANUAL This mnul provides detils on IQ Designer, which is ville with the upgrde. Mke sure tht the mchine hs een upgrded to the most recent version. When you find this icon

More information

Math Circles Finite Automata Question Sheet 3 (Solutions)

Math Circles Finite Automata Question Sheet 3 (Solutions) Mth Circles Finite Automt Question Sheet 3 (Solutions) Nickols Rollick nrollick@uwterloo.c Novemer 2, 28 Note: These solutions my give you the nswers to ll the prolems, ut they usully won t tell you how

More information

FOMA M702iG Manual for Data Communication

FOMA M702iG Manual for Data Communication FOMA M702iG Mnul for Dt Communiction Dt Communictions... 1 Before Using... 2 Prepring for Dt Communiction... 3 Instlling the Communiction Configurtion Files (Drivers)... 4 Connecting the FOMA Hndset nd

More information

SERVICE MANUAL 9940/20/10

SERVICE MANUAL 9940/20/10 9940/0/0 9/0/00 Tle of ontents REMOVING THE EXTERIOR PARTS... A. Light Cover... B. Bse... C. Top Cover (Flp)... 4 D. Hinge Cover... 4 E. Thred Tension Cover... 4 F. Side Enlosure... 5 G. Hndle nd Unit

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.

More information

Elettra Evolution OK! OK! b. User manual

Elettra Evolution OK! OK! b. User manual Elettr Evolution User mnul Pg. 1 INSTALLING THE SOLENOID VALVE. The progrmmle solenoi vlve is fully wtertight n will funtion even if instlle permnently uner wter t epth of up to one metre (IP68 ingress

More information

Kirchhoff s Rules. Kirchhoff s Laws. Kirchhoff s Rules. Kirchhoff s Laws. Practice. Understanding SPH4UW. Kirchhoff s Voltage Rule (KVR):

Kirchhoff s Rules. Kirchhoff s Laws. Kirchhoff s Rules. Kirchhoff s Laws. Practice. Understanding SPH4UW. Kirchhoff s Voltage Rule (KVR): SPH4UW Kirchhoff s ules Kirchhoff s oltge ule (K): Sum of voltge drops round loop is zero. Kirchhoff s Lws Kirchhoff s Current ule (KC): Current going in equls current coming out. Kirchhoff s ules etween

More information

The Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center

The Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center Resource Overview Quntile Mesure: Skill or Concept: 300Q Model the concept of ddition for sums to 10. (QT N 36) Model the concept of sutrction using numers less thn or equl to 10. (QT N 37) Write ddition

More information

Analog Input Modules

Analog Input Modules 7 922 nlog Input odules G56... nlog input modules for the ontrol of SQ5... ir dmper tutors y ontinuous nlog ontrol signls, suh s 4...20 m, nd ontinuous nlog position feedk signls. For supplementry Dt Sheets,

More information

Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world

Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world Person Edution Limited Edinurgh Gte Hrlow Essex M20 2JE Englnd nd ssoited ompnies throughout the world Visit us on the World Wide We t: www.personed.o.uk Person Edution Limited 2014 ll rights reserved.

More information

SAMPLE. End of term: TEST A. Year 4. Name Class Date. Complete the missing numbers in the sequences below.

SAMPLE. End of term: TEST A. Year 4. Name Class Date. Complete the missing numbers in the sequences below. End of term: TEST A You will need penil nd ruler. Yer Nme Clss Dte 2 Complete the missing numers in the sequenes elow. 50 25 00 75 8 30 3 28 2 9 Put irle round two of the shpes elow whih hve 3 shded. 3

More information

MODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH "H" HOLDER ARMS

MODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH H HOLDER ARMS MODEL POWERGLIDE SERIES INSTRUTIONS FOR INSTLLING SRGENT LOSERS WITH "H" HOLDER S SERIES NON SIZED DJUSTLE SIZES THRU 6 UTION: FILURE TO INSTLL OR DJUST PROPERLY MY RESULT IN INJURY OR DMGE. FOR SSISTNE,

More information

510 Series Color Jetprinter

510 Series Color Jetprinter 510 Series Color Jetprinter User s Guide for Windows Setup trouleshooting A checklist to find solutions to common setup prolems. Printer overview Lern out the printer prts nd the printer softwre. Printing

More information

Operation Manual. Sewing Machine. Product Code: 888-F42

Operation Manual. Sewing Machine. Product Code: 888-F42 Opertion Mnul Sewing Mhine Produt Code: 888-F42 Be sure to red this doument efore using the mhine. We reommend tht you keep this doument nery for future referene. INTRODUCTION INTRODUCTION Thnk you for

More information

Guide 1. User Guide. window. program.

Guide 1. User Guide. window. program. Guide 1 Olympus BX53 Digital Mirosope User Guide A. System Start up. 1. Sign into the log ook on the desk (start/end time). 2. Turn on (or wake up) the omputer and selet USER and enter the password on

More information

RWM4400UH High Performance Hand Held Wireless Microphone System

RWM4400UH High Performance Hand Held Wireless Microphone System CH 1 CH 2 CH 3 CH 4 UHF QUAD VOLUME MAX VOLUME MAX VOLUME MAX VOLUME RWM 4400UH MIN MIN MIN CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 RWM4400UH High Performne Hnd Held Wireless Mirophone System OWNER S MANUAL

More information

8.1. The Sine Law. Investigate. Tools

8.1. The Sine Law. Investigate. Tools 8.1 Te Sine Lw Mimi 50 ermud Tringle ermud 1600 km Sn Jun 74 Puerto Rio Te ermud Tringle, in te nort tlnti Oen, is te lotion of severl unexplined plne nd sip disppernes. Vrious teories ve een suggested

More information

Academic. Grade 9 Assessment of Mathematics SAMPLE ASSESSMENT QUESTIONS

Academic. Grade 9 Assessment of Mathematics SAMPLE ASSESSMENT QUESTIONS Aemi Gre 9 Assessment of Mthemtis 211 SAMPLE ASSESSMENT QUESTIONS Reor your nswers to the multiple-hoie questions on the Stuent Answer Sheet (211, Aemi). Plese note: The formt of this ooklet is ifferent

More information

AGA56... Analog Input Modules. Siemens Building Technologies HVAC Products

AGA56... Analog Input Modules. Siemens Building Technologies HVAC Products 7 922 nlog Input odules G56... nlog input modules for the ontrol of SQ5... ir dmper tutors y ontinuous nlog ontrol signls, suh s 4...20 m, nd ontinuous nlog position feedk signls. For supplementry Dt Sheets,

More information

Geometric quantities for polar curves

Geometric quantities for polar curves Roerto s Notes on Integrl Clculus Chpter 5: Bsic pplictions of integrtion Section 10 Geometric quntities for polr curves Wht you need to know lredy: How to use integrls to compute res nd lengths of regions

More information

CS2204 DIGITAL LOGIC & STATE MACHINE DESIGN SPRING 2005

CS2204 DIGITAL LOGIC & STATE MACHINE DESIGN SPRING 2005 CS2204 DIGITAL LOGIC & STATE MACHINE DESIGN SPRING 2005 EXPERIMENT 1 FUNDAMENTALS 1. GOALS : Lern how to develop cr lrm digitl circuit during which the following re introduced : CS2204 l fundmentls, nd

More information

Operation Manual. Product Code 885-V51. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX

Operation Manual. Product Code 885-V51. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX Computerized Emroidery Mhine Opertion Mnul Produt Code 885-V51 GETTING READY EMBROIDERY APPENDIX Plese visit us t http://solutions.rother.om where you n get produt support nd nswers to frequently sked

More information

TUR DOORS SHOWER DOORS

TUR DOORS SHOWER DOORS TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ

More information

MATHEMATICS. Student Booklet

MATHEMATICS. Student Booklet GRADE 6 ASSESSMENT OF READING, WRITING AND MATHEMATICS, 2004 2005 Stuent Booklet MATHEMATICS Plese note: The formt of these ooklets is slightly ifferent from tht use for the ssessment. The items themselves

More information

CONGRATULATIONS ON CHOOSING OUR MACHINE PLEASE READ BEFORE USING THIS MACHINE

CONGRATULATIONS ON CHOOSING OUR MACHINE PLEASE READ BEFORE USING THIS MACHINE CONGRATULATIONS ON CHOOSING OUR MACHINE Your mhine is the most dvned omputerized household sewing mhine. To fully enjoy ll the fetures inorported, we suggest tht you study the mnul. PLEASE READ BEFORE

More information

Operation Manual. Read before use. Read when additional information is required. GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

Operation Manual. Read before use. Read when additional information is required. GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX GETTING READY Red efore use. SEWING BASICS UTILITY STITCHES Red when dditionl informtion is required. APPENDIX Computerized Sewing Mhine Produt Code: 885-U24 Opertion Mnul IMPORTANT SAFETY INSTRUCTIONS

More information

ITEC2620 Introduction to Data Structures

ITEC2620 Introduction to Data Structures /5/20 ITEC220 Introdution to Dt Strutures Leture 0 Gme Trees Two-Plyer Gmes Rules for gme define the sttespe Nodes re gme sttes Links re possile moves Build serh tree y rute fore Exmple I Exmple II A Our

More information

(1) Primary Trigonometric Ratios (SOH CAH TOA): Given a right triangle OPQ with acute angle, we have the following trig ratios: ADJ

(1) Primary Trigonometric Ratios (SOH CAH TOA): Given a right triangle OPQ with acute angle, we have the following trig ratios: ADJ Tringles nd Trigonometry Prepred y: S diyy Hendrikson Nme: Dte: Suppose we were sked to solve the following tringles: Notie tht eh tringle hs missing informtion, whih inludes side lengths nd ngles. When

More information

POWER TRIM. Table of Contents. Section 5C - Dual Power Trim System

POWER TRIM. Table of Contents. Section 5C - Dual Power Trim System SERVICE MANUAL NUMBER 28 Tle of Contents POWER TRIM Setion 5C - Dul Power Trim System DUAL POWER TRIM SYSTEM Lurints / Selnts / Adhesives..... 5C-2 Importnt Informtion................ 5C-2 Testing Dul

More information

Operation Manual Embroidery

Operation Manual Embroidery Opertion Mnul Emroidery Emroidery nd Sewing Mchine Product Code: 882-W30 Be sure to red this mnul efore using the mchine. We recommend tht you keep this document nery for future reference. HOW TO USE

More information

Patterns and Relationships

Patterns and Relationships Series Techer Ptterns nd Reltionships opyright 009 3P Lerning. All rights reserved. First edition printed 009 in Austrli. A ctlogue record for this ook is ville from 3P Lerning Ltd. ISBN 978-1-91860-3-4

More information

Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed;

Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed; Aquuno Select Pg. INSTALLATION. Attch the timer to cold wter tp, following these simple instructions. Do not instll the timer in pit or vlve ox, elow ground level or indoors. Do not use the timer with

More information

For installation help please visit Please Do Not Return Product to Store!

For installation help please visit   Please Do Not Return Product to Store! Instlltion Guide Replement Sreen Housing for ndersen Luminire Retrtle Inset Sreen Door For instlltion help plese visit www.ndersenluminire.om/instll Plese Do Not Return Produt to Store PLESE ll the Storm

More information

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE

More information

ECE 274 Digital Logic Spring Digital Design. Combinational Logic Design Process and Common Combinational Components Digital Design

ECE 274 Digital Logic Spring Digital Design. Combinational Logic Design Process and Common Combinational Components Digital Design ECE 27 Digitl Logi Spring 29 Comintionl Logi Design Proess n Common Comintionl Components Digitl Design 2.7 2. Digitl Design Chpter 2: Comintionl Logi Design Slies to ompn the tetook Digitl Design, irst

More information

DCM Series DC T-Series Non-Spring Return Rotary Electronic Damper Actuators

DCM Series DC T-Series Non-Spring Return Rotary Electronic Damper Actuators DCM-0 Series DC-0-T-Series Non-Spring Return Rotry Eletroni Dmper Atutors. Atutor. U-olt shft pter. Position initor EA0R e f g. Shft pter loking lip e. Position initor pter f. Mounting rket g. Mounting

More information

Synchronous Generator Line Synchronization

Synchronous Generator Line Synchronization Synchronous Genertor Line Synchroniztion 1 Synchronous Genertor Line Synchroniztion Introduction One issue in power genertion is synchronous genertor strting. Typiclly, synchronous genertor is connected

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.

More information

Student Book SERIES. Patterns and Algebra. Name

Student Book SERIES. Patterns and Algebra. Name E Student Book 3 + 7 5 + 5 Nme Contents Series E Topic Ptterns nd functions (pp. ) identifying nd creting ptterns skip counting completing nd descriing ptterns predicting repeting ptterns predicting growing

More information

Job Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive.

Job Sheet 2. Variable Speed Drive Operation OBJECTIVE PROCEDURE. To install and operate a Variable Speed Drive. Job Sheet 2 Vrible Speed Drive Opertion OBJECTIVE To instll nd operte Vrible Speed Drive. PROCEDURE Before proceeding with this job, complete the sfety check list in Appendix B. 1. On the Vrible Speed

More information

Fitting & User Instructions

Fitting & User Instructions Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising

More information

GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Operation Manual. Computerized Sewing Machine

GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Operation Manual. Computerized Sewing Machine GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Importnt Sfety Instrutions Plese red these sfety instrutions efore ttempting to use the mhine. This mhine is

More information

Multi-Point Astragal Prehanger Installation Instructions

Multi-Point Astragal Prehanger Installation Instructions Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter

More information

Student Book SERIES. Fractions. Name

Student Book SERIES. Fractions. Name D Student Book Nme Series D Contents Topic Introducing frctions (pp. ) modelling frctions frctions of collection compring nd ordering frctions frction ingo pply Dte completed / / / / / / / / Topic Types

More information

Section 6.1 Law of Sines. Notes. Oblique Triangles - triangles that have no right angles. A c. A is acute. A is obtuse

Section 6.1 Law of Sines. Notes. Oblique Triangles - triangles that have no right angles. A c. A is acute. A is obtuse Setion 6.1 Lw of Sines Notes. Olique Tringles - tringles tht hve no right ngles h is ute h is otuse Lw of Sines - If is tringle with sides,, nd, then sin = sin = sin or sin = sin = sin The miguous se (SS)

More information

Lecture 20. Intro to line integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts.

Lecture 20. Intro to line integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts. Lecture 2 Intro to line integrls Dn Nichols nichols@mth.umss.edu MATH 233, Spring 218 University of Msschusetts April 12, 218 (2) onservtive vector fields We wnt to determine if F P (x, y), Q(x, y) is

More information

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...

More information

Magnetic monopole field exposed by electrons

Magnetic monopole field exposed by electrons Mgnetic monopole field exposed y electrons A. Béché, R. Vn Boxem, G. Vn Tendeloo, nd J. Vereeck EMAT, University of Antwerp, Groenenorgerln 171, 22 Antwerp, Belgium Opticl xis Opticl xis Needle Smple Needle

More information

ALONG with the maturity of mobile cloud computing,

ALONG with the maturity of mobile cloud computing, An Optiml Offloding Prtitioning Algorithm in Moile Cloud Computing Huming Wu, Dniel Seidenstüker, Yi Sun, Crlos Mrtín Nieto, Willim Knottenelt, nd Ktink Wolter system, nd their min gol is to keep the whole

More information

TOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE

TOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE TOOLS NEWS CN ENDMILL FO COPPE ELECTODE 007. Updte B00G Series expnsion, Corner dius type now included! A gret vriety of products. Totl sizes of 0 in 7 series. Copper Electrode End Mill Series CN Series

More information

REVIEW QUESTIONS TOPIC 5 TRIGONOMETRY I FLUENCY

REVIEW QUESTIONS TOPIC 5 TRIGONOMETRY I FLUENCY TOPIC 5 TRIGONOMETRY I REVIEW QUESTIONS FLUENCY The most urte mesure for the length of the third side in the tringle elow is: A 4.83 m B 23.3 m C 3.94 m D 2330 mm E 4826 mm 2 Wht is the vlue of x in this

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.

More information

GLONASS PhaseRange biases in RTK processing

GLONASS PhaseRange biases in RTK processing ASS PhseRnge ises in RTK proessing Gle Zyrynov Ashteh Workshop on GSS Bises 202 Bern Switzerlnd Jnury 8-9 202 Sope Simplified oservtion models for Simplified oservtion models for ASS FDMA speifi: lok nd

More information

Computerized Embroidery and Sewing Machine. Operation Manual

Computerized Embroidery and Sewing Machine. Operation Manual GETTING READY SEWING BASICS 2 UTILITY STITCHES 3 EMBROIDERY 4 APPENDIX 5 Computerized Emroidery nd Sewing Mhine Opertion Mnul Produt Code: 885-U0/U04 Be sure to red this doument efore using the mhine.

More information

CAL. NX15 DUO-DISPLAY QUARTZ

CAL. NX15 DUO-DISPLAY QUARTZ L. NX15 UO-ISPLY QURTZ l nlogue time disply l igitl time nd clendr l hronogrph l Tchymeter l t recll function l lrm l Illuminting light (Electroluminescent pnel) ENGLISH Illuminting light (TIME/LENR mode

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V12/V13/V15

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V12/V13/V15 GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Produt Code: 888-V12/V13/V15 Be sure to red this doument efore using the mhine. We reommend tht you keep this

More information

INSTALLATION & OPERATION INSTRUCTIONS LEVER HANDLE LOCKSETS.

INSTALLATION & OPERATION INSTRUCTIONS LEVER HANDLE LOCKSETS. INSTALLATION & OPERATION INSTRUCTIONS FOR LEVER HANDLE LOCKSETS 999-00333E_EN FOR BRINKS HOME SECURITY INTERIOR LOCKING & NON-LOCKING LEVER HANDLE LOCKSETS. FITS DOORS 1-3/8" (35 mm) TO 1-3/4" (45 mm)

More information

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You

More information

Detection of Denial of Service attacks using AGURI

Detection of Denial of Service attacks using AGURI Detetion of Denil of Servie ttks using AGURI Ryo Kizki Keio Univ. kizki@sf.wide.d.jp Kenjiro Cho SonyCSL kj@sl.sony.o.jp Osmu Nkmur Keio Univ. osmu@wide.d.jp Astrt Denil of Servie ttks is divided into

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V14

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V14 GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this doument efore using the mhine. We reommend tht you keep this doument nery for future referene. Opertion Mnul Computerized Sewing

More information

INSTALLER REFERENCE GUIDE

INSTALLER REFERENCE GUIDE PEN009-B_06_0.ook Pge Thursy, My 9, 06 : PM INSTALLER REFERENCE GUIDE PEN009-B_06_0.ook Pge Thursy, My 9, 06 : PM Contents pge Instller referene guie Aout this oument Aout this oument.... Aout this oument.....

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Importnt Sfety Instrutions Plese red these sfety instrutions efore ttempting to use the mhine. This mhine is

More information

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX. Easy Thread Cassette System

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX. Easy Thread Cassette System SE-BrotherE_sgml.ook Pge Mondy, June 30, 003 3:44 PM GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX CPS5XV[Y Esy Thred Cssette System Opertion Mnul Inluded Aessories After opening the

More information

SLOVAK UNIVERSITY OF TECHNOLOGY Faculty of Material Science and Technology in Trnava. ELECTRICAL ENGINEERING AND ELECTRONICS Laboratory exercises

SLOVAK UNIVERSITY OF TECHNOLOGY Faculty of Material Science and Technology in Trnava. ELECTRICAL ENGINEERING AND ELECTRONICS Laboratory exercises SLOVAK UNIVERSITY OF TECHNOLOGY Fulty of Mteril Siene nd Tehnology in Trnv ELECTRICAL ENGINEERING AND ELECTRONICS Lbortory exerises Róbert Riedlmjer TRNAVA 00 ELECTRICAL ENGINEERING AND ELECTRONICS Lbortory

More information

PROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN

PROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN RMMING MNUL MTM/01 MTMV/01 FB00329-EN Generl precutions Red the instructions crefully efore eginning the instlltion nd crry out the ctions s specified y the mnufcturer. The instlltion, progrmming, commissioning

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS INTRODUCTION INTRODUCTION Thnk you for purchsing this mchine. Before using this mchine, crefully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the correct opertion of the vrious functions.

More information

Proposed Cable Tables for SAS2

Proposed Cable Tables for SAS2 Tle 50 Requirements for internl le ssemlies using SASDrive onnetors n kplnes. Requirement, Units 1,5 Gps 3Gps 6 Gps Bulk le or kplne:, Differentil impene ohm 100 ± 10 100 g Common-moe impene ohm 32,5 ±

More information

* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service

* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service *24017501* 24017501 Coneled Vertil Devie for Wood Doors 98/9949WDC Instlltion Instrutions 1-Point Lth (LBL) 2-Point Lth inludes these dditionl prts NOTE: If door does not hve utout for ling inside lok

More information

1 tray of toffee 1 bar of toffee. 10 In the decimal number, 0 7, the 7 refers to 7 tenths or

1 tray of toffee 1 bar of toffee. 10 In the decimal number, 0 7, the 7 refers to 7 tenths or Chpter 3 Deciml Numers Do you know wht DECIMAL is? In chpter, we delt with units, s, 0 s nd 00 s. When you tke single unit nd divide it into (or 0 or 00) its, wht we then hve re deciml frctions of whole

More information

Operation Manual Sewing Machine

Operation Manual Sewing Machine Opertion Mnul Sewing Mhine Produt Code: 888-S33/S36 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this doument efore using the mhine. We reommend tht you keep this

More information

All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice.

All information provided related to future Intel products and plans is preliminary and subject to change at any time, without notice. TRADEMARKS IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING. By downloding, copying, instlling or using the softwre you gree to this license. If you do not gree to this license, do not

More information

Introduction 6 Basics 8 Projects 26. Stitching terms 94. About the author 95

Introduction 6 Basics 8 Projects 26. Stitching terms 94. About the author 95 Contents Klmh Books 21027 Crossros Cirle Wukesh, Wisonsin 53186 www.klmh.om/books 2010 Lesley Weiss All rights reserve. Exept for rief exerpts for review, this ook my not e reproue in prt or in whole y

More information

COMPUTER NETWORK DESIGN Network layer protocols

COMPUTER NETWORK DESIGN Network layer protocols OMPUTER NETWORK ESIGN Network lyer protools Network lyer (lyer 3) Gruppo Reti TL nome.ognome@polito.it http://www.telemti.polito.it/ OMPUTER NETWORK ESIGN Review of network lyer protools - opyright This

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet SF24A-MF Prmeterisle spring-return ctutor with emergency control function for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 4 m² Nominl torque 20 Nm Nominl

More information

Operation Manual. Embroidery Machine. Product Code: 882-D80/D82

Operation Manual. Embroidery Machine. Product Code: 882-D80/D82 Opertion Mnul Emroidery Mchine Product Code: 882-D80/D82 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. TRADEMARKS IMPORTANT: READ

More information

SUPER LED F10 165W LED Fresnel SPOTLIGHT (white light, either Tungsten or Daylight balanced Correlated Color Temperature) INSTRUCTION MANUAL

SUPER LED F10 165W LED Fresnel SPOTLIGHT (white light, either Tungsten or Daylight balanced Correlated Color Temperature) INSTRUCTION MANUAL SUPER LED F10 165W LED Fresnel SPOTLIGHT (white light, either Tungsten or Dylight lned orrelted olor Temperture) INSTRUTION MANUAL Mnul Operted Pole Operted MANUFATURER REPRESENTATIVE ILT Itly S.r.l. Vi

More information

Comparing Fractions page 1 of 2 1 Color in the grid to show the fractions below. Each grid represents 1 whole. a 1 2 b 1. d 16

Comparing Fractions page 1 of 2 1 Color in the grid to show the fractions below. Each grid represents 1 whole. a 1 2 b 1. d 16 Unit 2 Moule Session 2 Compring Frtions pge of 2 Color in the gri to show the frtions below. Eh gri represents whole. 2 b 4 0 0 e 4 2 Use the pitures bove to help omplete eh omprison below using ,

More information

9.4. ; 65. A family of curves has polar equations. ; 66. The astronomer Giovanni Cassini ( ) studied the family of curves with polar equations

9.4. ; 65. A family of curves has polar equations. ; 66. The astronomer Giovanni Cassini ( ) studied the family of curves with polar equations 54 CHAPTER 9 PARAMETRIC EQUATINS AND PLAR CRDINATES 49. r, 5. r sin 3, 5 54 Find the points on the given curve where the tngent line is horizontl or verticl. 5. r 3 cos 5. r e 53. r cos 54. r sin 55. Show

More information

Seven Sisters. Visit for video tutorials

Seven Sisters. Visit   for video tutorials Seven Sisters This imge is from www.quiltstudy.org. Plese visit this website for more informtion on Seven Sisters quilt ptterns. Visit www.blocloc.com for video tutorils 1 The Seven Sisters design cn be

More information

The Great-Case Cabinet Company

The Great-Case Cabinet Company Hng Angle Mesurement Proeure To ensure tht your guitr is hoste properly, we nee to know how ig it is. Our lrgest inet will host lmost ny guitr on the mrket, ut more eonomil size my e equte. If you hve

More information

Notes on Spherical Triangles

Notes on Spherical Triangles Notes on Spheril Tringles In order to undertke lultions on the elestil sphere, whether for the purposes of stronomy, nvigtion or designing sundils, some understnding of spheril tringles is essentil. The

More information

Lecture 16. Double integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts.

Lecture 16. Double integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts. Leture 16 Double integrls Dn Nihols nihols@mth.umss.edu MATH 233, Spring 218 University of Msshusetts Mrh 27, 218 (2) iemnn sums for funtions of one vrible Let f(x) on [, b]. We n estimte the re under

More information