BK ITALIA. Sofa-beds. Via Bergamo 66, Treviglio (BG) Telefono Fax

Size: px
Start display at page:

Download "BK ITALIA. Sofa-beds. Via Bergamo 66, Treviglio (BG) Telefono Fax"

Transcription

1 BK ITALIA Sofa-beds Via Bergamo 66, Treviglio (BG) Telefono Fax

2 BK ITALIA is a company specializing in the production of sofa beds. The BK ITALIA product is the result of different skills and professions that have managed to combine the concepts of rest and comfort through functional and high design solutions, creating essential furnishings for modern and traditional spaces capable of enhancing any home environment.

3 BK ITALIA Operating in the furniture sector since 1977, the company has bet on the combination of technology and design since the very beginning, thanks to its production flexibility. BK ITALIA is, in fact, one of the few companies to manage the entire sofa bed production cycle: from the carpentry department, where the metal parts needed for the mechanisms are made, to the upholstery department, to the department where semi-finished items are assembled together. In addition, all the prototypes designed by architects are made in the BK ITALIA laboratories. Quality, timely deliveries, strong focus on ethics (no exploitation of child labor and environmental compatibility certificates) and a solid financial position are the characteristics that have made BK ITALIA a point of reference in the sector, on both the Italian and international market, in the private and professional sector. ENVIRONMENTAL PROTECTION, SAFETY AND QUALITY POLICIES AND OBJECTIVES The company, operating on the market since 1954, has always considered the quality of the finished product and of its components to be of primary importance, thus adapting the selection of raw materials for semi-finished products and of technologies available on the market to the new environmental protection and workers safety requirements. The definition and planning of each phase of the production cycle is the result of choices that take into account compliance with the provisions on the subject of workers and environmental protection. Consequently, attention is paid both to aspects pertaining to internal raw materials transformation processes (management of production scrap, use of better products and technologies in terms of workers and environmental protection), and to the selection of suppliers of semifinished goods who are aware of environmental policies. There are five main types of product components (sofa/ bed conversion mechanism, mattress, accessory frames, padding and lining), and they are basically made up of four types of raw materials: iron, wood, padding material (elastic foam polyurethane, natural feather) and fabric (mostly cotton). GUIDELINES Environment use of raw materials and recyclable materials and materials of known origin use of full recovery (electrostatic painting system with epoxy powder) or partial recovery (in-line greasing system with purification plant for the recovery of dirty solvent) systems management of processing scrap according to welldefined and regulated procedures: the waste generated can be recovered as secondary raw material for almost all types (iron and wooden scrap, remnants of cotton fabric, paper and cardboard for packing) selection of suppliers according to principles concerning issues of workers and environmental protection (certificates requested with regards to materials and productive cycles used) Safety production cycle managed according to instructions and procedures defined in the Safety document drawn up in compliance with regulations in force (Italia Law 626/94) and periodically updated systems and machinery updated and with EC markings specialized personnel updated through specific training courses ordinary maintenance managed internally by suitably trained internal staff defined emergency and fire-prevention plan Quality quality control (verifying the suitability of the product or semi-finished item) carried out by personnel in charge in every production department and in the warehouse upon the receiving of goods production process monitored and checked at the computer level (phase advancement detected in real time by means of a bar code system) in every single sub-phase of the manufacturing and warehouse departments personalized warranty certificate for each product with specifications on components and materials, utilization methods, safety regulations selection of materials with excellent characteristics and qualities (see subsequent paragraph)

4 PRODUCTION CYCLE AND MATERIALS Metal Carpentry Complete and flexible department in which, thanks to the experience of its staff and constantly updated equipment, the machining and production of all metal parts needed to make the sofa-bed conversion mechanism are carried out. The department also guarantees the possibility to manufacture new frames (prototypes studied and designed by the company s own research and development office) and to put in production mechanisms with special sizes requested by the customer Materials use of raw materials of national origin E220 quality steel, certified 2.2 and 3.1 according to standards EN types according to standards EN and 5: steel sections obtained from a cold-rolled strip with surfaces that can be painted or chromed (i.e. for visible parts and the structure of the spring of the mechanisms built with 30x30x2 mm and 0x30x1.5 mm section with slots for the insertion of slats) steel sections obtained from a hot-rolled pickled strip (i.e. for load-bearing frame round, square and rectangular sections from 60x40x2 mm up to 10x10x1.5 mm, always with a minimum thickness of 1.5 mm) round, flat drawn elements in Fe360 (i.e. for the movement mechanism flat 30x5 mm and supporting structures) Metal carpentry phases Cutting automatic cutting by means of CNC machine of q bundles of rods with bars 6 m long programmable in three different cutting measures in continuous Shearing shears of different tonnage (from 30 q to 160 q) equipped with individual moulds and step processing for drilling, shearing, bending Degreasing in-line solvent-based degreasing system by immersion with purification system for the recovery of dirty solvent Welding arc welding with metal under gas protection (MIG -Metal-arc Inert Gas type) with continuous filament that guarantees a highly productive process; at the same time, the presence of inert gas allows for an operation without any waste robotic welding stations (shielded anthropomorphous robots) that work on templates which offer univocal positioning of the individual pieces and a constant quality even for important work orders manual welding stations equipped with templates identical to those used in the robotic stations Painting automatic electrostatic painting system with powder with automatic high-penetration guns that guarantee a protective film of a 70/80 micron minimum thickness on the painted piece polyester mica powder paint, gun-barrel gray, for products exposed to the elements; excellent resistance to corrosion excellent resistance to atmospheric agents excellent retention of shine and constant color over time high mechanical characteristics, high elasticity Assembly positioning of the semi-finished products onto threedimensional templates to guarantee constant assembly quality riveting with pneumatic riveting machines coming from the aeronautical sector Quality control the quality control carried out at the end of each single phase, from the acquisition of raw materials to the finished carpentry product: sampling dimensional checks, static and material workability tests Upholstery Cutting automatic cutting with CNC machine of fabric mattresses with cutting plans managed by an in-line software program manual cut with electric cutter with automatic sharpener for special types of fabrics (flowered, striped, leathers) Overcasting use of technologically advanced sewing machines specifically suited for the type of sewing Sewing overcasting, single, double stitches, leather) equipped with personalized tables

5 Pre-upholstery use of foam polyurethane, a raw material used both for the padding of pillows and of accessory frames (armrests and backrests) and in the padding of mattresses (whose structure consists of a series of steel springs) supplied by manufacturing companies that guarantee the absence of chlorofluorocarbons (C.F.C.) upon the customer s request, supply of special materials with high resistance to flammability, through the addition of specially modified additives and raw materials (to satisfy the strictest international regulations on the subject of fire-prevention). use of water or solvent-based gluing systems depending on the combination of materials to be glued together (wood, iron, polyurethane) Lining assembly use of ergonomic tables and flexible stations depending on the type of assembly to be carried out lining phase entrusted to the artisan skills of specialized and expert workers Woodworking Materials use of material without any surface treatments and verification that the origin of the wood is the nondestructive type types used: a. solid pinewood for internal support structures b. poplar plywood thickness 10/18 mm for front elements and side closings of the armrest frames c. phenolic OSB panels 18.5 mm resistant to humidity for the armrests support structures d. wooden fiber 3mm thick for closings with special shapes Assembly use of different fixing typologies at the same time shaped groove gluing with vinyl glue fixing with metallic points Ø1.1 mm Mattresses department SPECIAL PRODUCTIONS Fireproof type-approved products collection of products equipped with type-approval for fire prevention issued by the Ministry of the Interior (fire resistance class 1 IM) and specific certifications on materials used (standards EN 1021) Custom-made products possibility to manufacture custom-made products and various compositions RESEARCH AND DEVELOPMENT The company s own internal research and development department, fully operational operative and in constant activity, is capable of turning any of the designers new ideas and suggestions into a reality in a short period of time Research and development office study of the movement mechanisms using last-generation software (Inventor 2008 by Autodesk, Autocad 2008) that kinematic movements (three-dimensional rototranslations) to be studied and developed and of static and dynamic applications for the analysis of the stress limit states Prototypes laboratory laboratory equipped with high-precision equipment (lathe, milling cutter, column drill, etc.) used to manufacture special custom-made pieces to be assembled and tested on the prototypes Testing department department in which materials and products are tested by subjecting them to continuous and programmable work cycles with motors applied to the mechanisms Types possibility to fit different types of mattresses on sofa beds with standard dimensions (height 15 cm): a. orthopedic spring mattresses b. polyurethane mattresses with varying density c. mattresses with Memory foam d. box spring mattresses for single sofa beds

6 The new generation

7 The headquarters

8 Materials

9

10

11 Welding

12

13 Painting

14 Upholstery

15

16 Mattress / Padding

17 Wood Work

18 Storage

19 Assembly

20 Delivery

21 Supplies for Hotels period continent nation hotel Africa Benin 1 Egypt 1 Ethiopia 1 Ghana 1 Madagascar 1 Morocco 2 Nigeria 2 Reunion 1 Senegal 1 Total Africa 11 North America Canada 1 Total North America 1 South America Chile 1 Total South America 1 Asia Saudi Arabia 1 China 2 Lebanon 1 Singapore 1 Turkey 1 Total Asia 6 Europe Andorra 1 Austria 1 Belgium 6 Cyprus 2 France 155 Germany 13 Great Britain 44 Greece 2 Italy 40 Lithuania 1 Luxemburg 3 Montecarlo 2 Nederlands 11 Poland 5 Portugal 1 Czech Rep. 3 Romania 1 Russia 2 Spain 12 Switzerland 7 Ungheria 4 Total Europe 316 Overall Total 335

22

23 Press Esc To Exit

TECHNICAL FEATURES GLOVE

TECHNICAL FEATURES GLOVE TECHNICAL FEATURES GLOVE 02/2018 STATIONARY CHAIR 4-LEGGED CHAIR Perforated polypropylene (variable thickness of 6-8 mm) / Fully upholstered (foam thickness of 5 mm) / Wooden (10 mm thick beech polylaminated)

More information

Plural TECHNICAL FEATURES

Plural TECHNICAL FEATURES Plural TECHNICAL FEATURES 04/2016 VISITOR CHAIR 4-LEGGED MESH BACKREST Frame Reinforced polyamide Arms Without arms Fixed polyamide arms (polar white or black) Goal Mesh Seat Upholstered polyurethane foam

More information

Montevideo Designed by Claesson Koivisto Rune, 2008 Cat. Sofas

Montevideo Designed by Claesson Koivisto Rune, 2008 Cat. Sofas 1 (En) info@tacchini.it tacchini.it Montevideo Designer: Claesson Koivisto Rune Year: 2008 Carefully designed shapes and sizes for all-round comfort: this is the guiding principle behind the Montevideo

More information

ODEK shared 50% of Ukrainian plywood production in 2010, 48% in 2011 and 2012.

ODEK shared 50% of Ukrainian plywood production in 2010, 48% in 2011 and 2012. About Company The history of the plywood factory has started at the end of the XIX century when the Society of mechanical wood processing was founded in Orzhiv, Rivne region, Ukraine. Over a period of

More information

SouthBeach Designed by Christophe Pillet, 2006 Cat. Armchairs

SouthBeach Designed by Christophe Pillet, 2006 Cat. Armchairs 1 (En) info@tacchini.it tacchini.it SouthBeach Designer: Christophe Pillet Year: 2006 As fascinating as a throne and as protective as a cradle, a seat that combines the concepts of strength and softness

More information

BenchTop Extraction Arms with unbeatable flexibility

BenchTop Extraction Arms with unbeatable flexibility BenchTop Extraction Arms with unbeatable flexibility A new generation of BenchTop extraction arms with unbeatable flexibility Nederman introduces a new generation of BenchTop arms the FX, FX and FX. These

More information

TECHNICAL PROFILES CATALOGUE 2016

TECHNICAL PROFILES CATALOGUE 2016 TECHNICAL PROFILES CATALOGUE 2016 ULTIMATE PROFILE SOLUTIONS Table of Contents: I. FILTER FRAME PRofIles...........................9 AP 669................................................... 9 AP 591...................................................

More information

Santiago Armchair. Designed by Claesson Koivisto Rune, 2016 Cat. Armchairs. 1 (En) tacchini.it

Santiago Armchair. Designed by Claesson Koivisto Rune, 2016 Cat. Armchairs. 1 (En) tacchini.it 1 (En) info@tacchini.it tacchini.it Santiago Designer: Claesson Koivisto Rune Year: 2016 Soft and comfortable with a contemporary cut, Santiago armchairs and sofas play with unusual proportions to create

More information

PITAGORA design: Acropoli, Caimi Lab

PITAGORA design: Acropoli, Caimi Lab design: Acropoli, Caimi Lab 1/8 Pitagora Pitagora is a system of seats on beam. The product is made of steel and particular attention has been paid to the formality of the design, solidity and comfort

More information

Parentesi Designed by Pietro Arosio, 1997 Cat. Armchairs

Parentesi Designed by Pietro Arosio, 1997 Cat. Armchairs 1 (En) info@tacchini.it tacchini.it Parentesi Designer: Pietro Arosio Year: 1997 Its name means parenthesis: a simple, effective description of this collection, with its clean, essential, curved lines.

More information

We are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation

We are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation We are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation MEP towards INDUSTRY 4.0 We have launched an investment plan

More information

STAINLESS STEEL STAINLESS STEEL MANUFACTURING STAINLESS STEEL TRADING BRIGHT BARS WIRES PRECISION COMPONENTS

STAINLESS STEEL STAINLESS STEEL MANUFACTURING STAINLESS STEEL TRADING BRIGHT BARS WIRES PRECISION COMPONENTS STAINLESS STEEL BRIGHT BARS WIRES PRECISION COMPONENTS BHANSALI is diversified business group with interests in Stainless Steel, Textiles and ABS Plastics. Under the dynamic leadership of Mr. Pukhraj Bhansali

More information

Company Profile. Jongen. Werkzeugtechnik

Company Profile. Jongen. Werkzeugtechnik Company Profile Jongen Werkzeugtechnik Company Profile Jongen Werkzeugtechnik GmbH has been founded in 1974 and has its headquarter in Willich, near Düsseldorf, Germany. Jongen Werkzeugtechnik GmbH is

More information

KOLLER METAL AND PLASTICS TECHNOLOGY Love for precision

KOLLER METAL AND PLASTICS TECHNOLOGY Love for precision KOLLER METAL AND PLASTICS TECHNOLOGY Love for precision metall-kunststoff.rkoller.com With more than 40 years experience in the whirlpool industry, Koller is proud of its achievements. It was the first

More information

Chill-Out Designed by Gordon Guillaumier, 2013 Cat. Modular System

Chill-Out Designed by Gordon Guillaumier, 2013 Cat. Modular System 1 (En) info@tacchini.it tacchini.it Chill-Out Designer: Gordon Guillaumier Year: 2013 Chill-Out is a system of sofas and armchairs that can stand alone or create a vast range of different linear or corner

More information

Highlife Designed by Claesson Koivisto Rune, 2011 Cat. Sofas

Highlife Designed by Claesson Koivisto Rune, 2011 Cat. Sofas 1 (En) info@tacchini.it tacchini.it Highlife Designer: Claesson Koivisto Rune Year: 2011 Simplicity and dynamism are the key elements for this solution: every piece features backs in different heights,

More information

WOODWORKING TECHNOLOGY IN EUROPE: HIGHLIGHTS European Federation of Woodworking Technology Manufacturers

WOODWORKING TECHNOLOGY IN EUROPE: HIGHLIGHTS European Federation of Woodworking Technology Manufacturers European Federation of Woodworking Technology Manufacturers ADVANCED ECONOMIES - GDP % GROWTH RATE 2017 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0 Ireland Malta Slovenia Estonia Latvia Czech Republic Cyprus

More information

Happy Hour Designed by Pietro Arosio, 2003 Cat. Sofas

Happy Hour Designed by Pietro Arosio, 2003 Cat. Sofas 1 (En) info@tacchini.it tacchini.it Happy Hour Designer: Pietro Arosio Year: 2003 Happy Hour is a system of sofas characterized by its great flexibility of function and integration. The seat which is available

More information

oscar Design: Charaziak Design Studio

oscar Design: Charaziak Design Studio Design: Charaziak Design Studio oscar v i p oscar v i p Elite armchair designed for maximum comfort of use. The harmonious, timeless shape, the simple, classic design and comfortable, ergonomically profiled

More information

AFRIWOOD POST SHOW REPORT E A S T A F R I C A. East Africa s Largest International Trade Exhibition On Woodworking & Furniture Manufacturing

AFRIWOOD POST SHOW REPORT E A S T A F R I C A. East Africa s Largest International Trade Exhibition On Woodworking & Furniture Manufacturing th 5. 2018 AFRIWOOD E A S T A F R I C A East Africa s Largest International Trade Exhibition On Woodworking & Furniture Manufacturing POST SHOW REPORT 03-05 May 2018 Kenyatta Int l. Convention Centre,

More information

Republic of Turkey Ministry of Economy,

Republic of Turkey Ministry of Economy, Republic of Turkey Ministry of Economy, 2012 0 FURNITURE INDUSTRY IN TURKEY Furniture production in Turkey dates back to the 19th century and was done in small workshops as artisan production. However,

More information

LASER CUTTING, ROBOTIZED BENDING AND WELDING. Med Matrix, a reliable partner ready for any challenge! HIGH PRECISION METAL SHEET PROCESSING

LASER CUTTING, ROBOTIZED BENDING AND WELDING. Med Matrix, a reliable partner ready for any challenge! HIGH PRECISION METAL SHEET PROCESSING www.med-matrix.com HIGH PRECISION METAL SHEET PROCESSING LASER CUTTING, ROBOTIZED BENDING AND WELDING Our first aim has always been to offer the highest quality and the best service. Med Matrix, a reliable

More information

Lima Designed by Claesson Koivisto Rune, 2012 Cat. Sofas

Lima Designed by Claesson Koivisto Rune, 2012 Cat. Sofas 1 (En) info@tacchini.it tacchini.it Lima Designer: Claesson Koivisto Rune Year: 2012 A system consisting of sofas and armchairs in different sizes, with a markedly sleek shape to receive the body nicely.

More information

A 5,000-square-meter surface. 45 employees

A 5,000-square-meter surface. 45 employees 2 3 A 5,000-square-meter surface 45 employees A leading company for 25 years Gimatic was founded in 1985 by three partners who created a dynamic reality that has always paid attention to the market developments

More information

your long-term reliable partner

your long-term reliable partner Corporate Profile your long-term reliable partner 2018 Ozay Dokum www.ozaydokum.com 1 Key Figures - Integrated production facilities - 25 years of experience - 10.000 m 2 area - 120 employees - 45% export

More information

International. September 29th October 3rd 2014 Brno, Czech Republic. 56 th International Engineering Fair

International. September 29th October 3rd 2014 Brno, Czech Republic. 56 th International Engineering Fair 56 th International Engineering Fair Measuring, control, automation and regulation technology 1 International Engineering Fair September 29th October 3rd 2014 Brno, Czech Republic International Engineering

More information

Frame through-beam sensors

Frame through-beam sensors Frame through-beam sensors Features Wide range of sizes: passage sizes from 25 x 23 mm to 300 x 397.5 mm Metal housings Integrated evaluation unit Connection by means of connector Degree of protection

More information

Designed by Achille + Pier Giacomo Castiglioni, (1982) Cat. Armchairs

Designed by Achille + Pier Giacomo Castiglioni, (1982) Cat. Armchairs 1 (En) info@tacchini.it tacchini.it Sancarlo Designer: Achille + Pier Giacomo Castiglioni Year: (1982) 2010 Sancarlo is a reissue of a classic designed by Achille Castiglioni. Both versions, armchair and

More information

0226/18-V1-02 IMTEC HR. High mechanical Resistance fastener for composite materials

0226/18-V1-02 IMTEC HR. High mechanical Resistance fastener for composite materials 0226/18-V1-02 IMTEC HR High mechanical Resistance fastener for composite materials IMTEC HR Cold forged fastener BÖLLHOFF used its expertise in assembly technologies to combine the best of metals and plastics.

More information

Barofor Round System (polyester coated) Panels, Posts, Accessories

Barofor Round System (polyester coated) Panels, Posts, Accessories 1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts

More information

SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).

SECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM). PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3

More information

We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting

We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting We offer a one stop shop service for small and medium size steel products manufacturing. sheet and tube laser and waterjet et cutting bending, pressing and forming turning and milling welding - stainless,

More information

233/2 230-S multipurpose chair

233/2 230-S multipurpose chair 230 range 230/1 230 multipurpose chair 30 ¾" 21 ¼" 22 ⅞" 17 ⅜" 230/2 230 multipurpose chair 30 ¾" 23 ¼" 22 ⅞" 17 ⅜" 232/1 230 task chair 29 ⅞"/34 ⅝" 25 ⅝" 25 ¼" 15 ¾"/20 ½" 232/2 230 visitor chair 29 ⅞"/34

More information

QUALITY SYSTEM MISSION VISION

QUALITY SYSTEM MISSION VISION QUALITY SYSTEM MISSION Knowleage and skills combined with creativity is the focus of our performance and this is what makes us special, development oriented, dynamic, manufacturing and service providing

More information

SLIDING SYSTEMS. Product catalog 2017

SLIDING SYSTEMS. Product catalog 2017 SLIDING SYSTEMS Product catalog 2017 Grafipro Oy Product catalog 2017 Table of contents: 3 Areas of use 4 C rails C-30 is a company specialising in aluminium and plastic composite materials. Our expertise

More information

P7500 Series Probes Tip Selection, Rework and Soldering Guide

P7500 Series Probes Tip Selection, Rework and Soldering Guide How-to-Guide P7500 Series Probes Tip Selection, Rework and For Use with Memory Component Interposers P7500 Series Probe Tip Selection, Rework and for Use with Memory Component Interposers Introduction

More information

RONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as:

RONDAL. The use of slugs is extremely widespread and diverse, because they are processed in various industries, such as: 1 2 RONDAL Based on many years of experience, we provide our buyers with a wide range of high-quality stamped and sawn slugs from pure aluminium and aluminium alloys. Different dimensions and shapes with

More information

Design for Manufacturability Guide

Design for Manufacturability Guide Design for Manufacturability Guide WHO WE ARE Short-to-medium run metal stamping manufacturer Annual volume of 250 to 300,000 per part number We serve a very diversified mix of customers & markets Our

More information

The surface is polished, grainless, non-porous and clean which can be printed, painted, coated and laminated directly.

The surface is polished, grainless, non-porous and clean which can be printed, painted, coated and laminated directly. INTRODUCTION An estimated area of one hectare is being deforested every second in the world today. A large share of deforestation is being done to meet the global demand for wood. Our Eco friendly PVC

More information

FURNITURE & BEDDING. Nonwovens

FURNITURE & BEDDING. Nonwovens FURNITURE & BEDDING Nonwovens 2 EDILFLOOR SPA Edilfloor is today one of the main suppliers of needlepunched technical textiles to the European upholstery and furniture industry. Edilfloor supplies several

More information

SECTION BULLET- RESISTANT DOORS

SECTION BULLET- RESISTANT DOORS 1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and

More information

BenchTop Extraction Arms with unbeatable flexibility

BenchTop Extraction Arms with unbeatable flexibility BenchTop Extraction Arms with unbeatable flexibility A new generation of BenchTop extraction arms with unbeatable flexibility Nederman introduces a new generation of BenchTop arms the FX, FX and FX. These

More information

Millennium Drive. Designed by Christophe Pillet, 2008 Cat. Sofas. 1 (En) tacchini.it

Millennium Drive. Designed by Christophe Pillet, 2008 Cat. Sofas. 1 (En) tacchini.it 1 (En) info@tacchini.it tacchini.it Designer: Christophe Pillet Year: 2008 Theatrical in its visual impact yet minimalist in design, holds the body in a soft and ergonomic embrace and defines space with

More information

ANN. design - INCLASS Studio.

ANN. design - INCLASS Studio. ANN is a wide and versatile collection of chairs, armchairs,stools and benches with a neutral design that is both amiable and welcoming through the use of the wood and upholstery. The collection originates

More information

PROGRAM AT-A-GLANCE: PRINT ENGINES SPECIALIZATION EUROPE, MIDDLE EAST AND AFRICA

PROGRAM AT-A-GLANCE: PRINT ENGINES SPECIALIZATION EUROPE, MIDDLE EAST AND AFRICA PROGRAM AT-A-GLANCE: PRINT ENGINES SPECIALIZATION EUROPE, MIDDLE EAST AND AFRICA SPECIALIZATIONS: REWARDING YOUR EXPERTISE Through the Zebra PartnerConnect program, Zebra supports, recognizes and rewards

More information

SECTION METAL FABRICATIONS

SECTION METAL FABRICATIONS SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM

More information

Through-beam ring sensors

Through-beam ring sensors Throughbeam ring sensors Features Wide range of sizes: ring diameters of 10, 15 and 20 mm Metal housings Separate evaluation unit Connection by means of S8 connector Degree of protection IP 63 Adjustable

More information

stripax The professional stripping tool

stripax The professional stripping tool stripax The professional stripping tool stripax the original: developed from experience Weidmüller is the world s leading manufacturer of solutions for electrical connectivity, transmission, conditioning

More information

24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA

24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA 24-27 MAY 2017 PUTRA WORLD TRADE CENTRE KUALA LUMPUR, MALAYSIA THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION EXHIBITORS PROFILE MACHINE TOOLS Boring, Broaching, CNC

More information

Avery Dennison ICS Performance Guarantee Sign Cut and Wrapping Films Durability Bulletin 2.0

Avery Dennison ICS Performance Guarantee Sign Cut and Wrapping Films Durability Bulletin 2.0 Sign Cut and Wrapping Films Durability Bulletin 2.0 EU Revision number: 3 Date: 062016 ICS PERFORMANCE GUARANTEE The ICS Performance Guarantee combines our films with other qualified components to form

More information

English. GEMINISeries. The finishing solution FLEXO SEMI-ROTARY DIE CUTTING LASER CONVERTING

English. GEMINISeries. The finishing solution FLEXO SEMI-ROTARY DIE CUTTING LASER CONVERTING English GEMINISeries The finishing solution FLEXO SEMI-ROTARY DIE CUTTING LASER CONVERTING GEMINIseries The finishing solution The high demand for customization and on-demand solutions is the current driver

More information

HDS CHAIR p o r t a b l e c h a i r

HDS CHAIR p o r t a b l e c h a i r HDS CHAIR p o r t a b l e c h a i r The HDS is a comfortable and versatile portable chair that link and stack easily onto storage trolleys. With a robust steel frame, fabricated from oval tubing and rod

More information

AUTREY. Since 1993, Autrey Furniture has created hospitality seating that delivers: Now we want to work with you! FURNITURE MFG.

AUTREY. Since 1993, Autrey Furniture has created hospitality seating that delivers: Now we want to work with you! FURNITURE MFG. AUTREY Since 1993, Autrey Furniture has created hospitality seating that delivers: Comfort and style for travelers Value and dependability for hoteliers Consistency and competiveness for brands Now we

More information

COLOURS PRODUCT DESCRIPTION SEAT CUSHION DESIGN KASPER SALTO 1967-

COLOURS PRODUCT DESCRIPTION SEAT CUSHION DESIGN KASPER SALTO 1967- NAP The Danish designer Kasper Salto has designed the NAP chair for Fritz Hansen. NAP is a series of light chairs, armchairs and bar- and counter stools designed for optimum sitting comfort regardless

More information

The Weaving Material

The Weaving Material The Weaving Material is made of high quality synthetic fiber, solid, High Density PolyEthylene (HDPE), tensile force, washable, no fading, non-toxic, chemical resistant, UV resistant and adapt to kinds

More information

PROVEN WISA PLYWOOD FOR CONCRETE FORMING on time and on the spot to grow your business

PROVEN WISA PLYWOOD FOR CONCRETE FORMING on time and on the spot to grow your business PROVEN WISA PLYWOOD FOR CONCRETE FORMING on time and on the spot to grow your business WISA MEETS YOUR REQUIREMENTS UPM has been manufacturing plywood for over a century and as an active supplier to the

More information

ENG ME 25. Automatic edge bander

ENG ME 25. Automatic edge bander ENG ME 25 Automatic edge bander me 25 THE INNOVATIVE AUTOMATIC EDGE BANDING MACHINE FOR CRAFT JOINER S SHOPS Stable, steady, with constantly maintained adjustments, thanks to the stainless steel single-block

More information

TECHNOLOGIES READY TO MOVE smart innovation for successful results DAL MASCHIO

TECHNOLOGIES READY TO MOVE smart innovation for successful results DAL MASCHIO TECHNOLOGIES READY TO MOVE smart innovation for successful results DAL MASCHIO EN 40 years of reached goals Technical forefront for plastic transformers OUR MISSION OUR MISSION DAL MASCHIO a forefront

More information

Doodle Designed by Claesson Koivisto Rune, 2008 Cat. Chairs

Doodle Designed by Claesson Koivisto Rune, 2008 Cat. Chairs 1 (En) info@tacchini.it tacchini.it Doodle Designer: Claesson Koivisto Rune Year: 2008 Like the armchair from the same collection, the chair and stool also draw their inspiration from doodles, which are

More information

The Chosen Partner. Your complete sub-supplier of sheet metal products

The Chosen Partner. Your complete sub-supplier of sheet metal products The Chosen Partner Your complete sub-supplier of sheet metal products Stansefabrikken is a Norwegian based company with long experience as sub-supplier of various sheet metal products. It always has been

More information

FRIMO Your Global Technology Partner.

FRIMO Your Global Technology Partner. FRIMO Your Global Technology Partner. FRIMO is one of the leading specialists for the development and manufacturing of tooling, machinery and equipment for the production of high-quality plastic components

More information

UPHOLSTERY PRODUCT DESCRIPTION DESIGN WARRANTY ARNE JACOBSEN

UPHOLSTERY PRODUCT DESCRIPTION DESIGN WARRANTY ARNE JACOBSEN SERIES 7 The Series 7 designed by Arne Jacobsen is by far the most sold chair in the history of Fritz Hansen and perhaps also in furniture history. The pressure moulded veneer chair is a further development

More information

PRODUCT DESCRIPTION UPHOLSTERY DESIGN WARRANTY ARNE JACOBSEN

PRODUCT DESCRIPTION UPHOLSTERY DESIGN WARRANTY ARNE JACOBSEN SERIES 7 The Series 7 designed by Arne Jacobsen is by far the most sold chair in the history of Fritz Hansen and perhaps also in furniture history. The pressure moulded veneer chair is a further development

More information

3 Always Lounge chair 4 star. Sizes

3 Always Lounge chair 4 star. Sizes Always Lounge chair leg Always Lounge chair sled base Always Lounge chair wooden base Always Lounge chair star Always Lounge chair design by naughtone 0 Page Design always lounge Chair An easy form for

More information

LILY 3208/3218. Design: Arne Jacobsen

LILY 3208/3218. Design: Arne Jacobsen Arne Jacobsen s chair model 3208 was originally designed for the Danish central bank It is also referred to as the Lily and was first introduced at the Danish furniture fair in 1970 The chair is a result

More information

PRICE LIST 2018 FOLHA

PRICE LIST 2018 FOLHA PRICE LIST 2018 FOLHA 2 3 Albaplus turns to the world of HORECA with the utmost professionalism, which has always set Metalmeccanica Alba apart. The various product options allow an interior designer to

More information

EASY APPLICATION. Furniture Linoleum

EASY APPLICATION. Furniture Linoleum EASY APPLICATION Furniture Linoleum can be applied easily on all common materials such as MDF, chipboard and Plywood as well as steel or composite materials. Furniture Linoleum has a special matte appearance

More information

A N DT RA DITION.CO M CLOUD TWO SEATER LN2 B Y

A N DT RA DITION.CO M CLOUD TWO SEATER LN2 B Y A N DT RA DITION.CO M CLOUD TWO SEATER LN2 LUCA N ICHET TO TWO SEATER LN2 L U CA N ICHET TO My idea was to combine the Italian and Danish traditions of making soft and cosy pillows of the Italian inheritage.

More information

DECORATIVE LAMINATES OCTOWEAVE TECHNICAL DATA

DECORATIVE LAMINATES OCTOWEAVE TECHNICAL DATA OCTOWEAVE Page 1/11 DECORATIVE LAMINATES OCTOWEAVE TECHNICAL DATA SUPPLIER Octopus Products Limited 23 Gurney Crescent Toronto, ON CANADA M6B 1S9 Phone: (416) 531-5051 or Toll free: 1-877 OCTOLAM TECHNICAL

More information

VARYA TAPIZ. design - Simon Pengelly.

VARYA TAPIZ. design - Simon Pengelly. The collection encompasses all the upholstered versions in the VARYA family, generated by combining three versions of comfortable upholstered seats with different metallic and wooden bases. The shells

More information

ACHIEVER AC

ACHIEVER AC ACHIEVER AC100 www.outcomeseating.com - 855.967.4400 ACHIEVER AC100 key features -Height adjustable mesh back and upholstered seat -Synchronous mechanism -Seat depth adjustment by 3.9 inches -Lumbar support

More information

Saudi Oger Presentation Feb. 10,

Saudi Oger Presentation Feb. 10, Saudi Oger Presentation Feb. 10, 2011 www.obeflex.com AGENDA About us Diverse range of PVC & PTFE fabric State of art production facilities Production and supply processes Base fabric weaving Base fabric

More information

#wewanttositbetter ATENEA_FORM

#wewanttositbetter ATENEA_FORM #wewanttositbetter ATENEA_FORM BY Introducing the ATENEA_FORM The Future is_now. 2 atenea form We`re very pleased to introduce worldwide the DILE proposal for the challenges of New Education seating systems:

More information

Lounge furniture sweetspot

Lounge furniture sweetspot Lounge furniture sweetspot A more relaxed approach to work: Sedus sweetspot. sweetspot is not only an attractive range of comfortable lounge furniture for your office, but also creates a relaxed, casual

More information

Monthly Summary of Troop Contribution to UN Operations

Monthly Summary of Troop Contribution to UN Operations Monthly Summary of Troop Contribution to UN Operations Month of Report : 3-Dec-3 Country Description of Post M F Totals ) Albania Individual Police............ 0 Subtotal for Country ) Algeria Experts

More information

Egyptian company for technological industries "Egycom"

Egyptian company for technological industries Egycom الش ركة المص رية للص ناعات التكنولوجية "ا يجيكوم" Egyptian company for technological industries "Egycom" Metal Cutting - Metal Forming - Machined Parts - Springs Cutting Tools - Static Tool Holders - Driven

More information

RASCHEL MACHINE EXPAND YOUR PRODUCTION HEAVY DUTY NETS SAFETY NETS. SIANG MAY 51 Ubi Avenue 1, #03-03 Paya Ubi Industrial Park ingapore

RASCHEL MACHINE EXPAND YOUR PRODUCTION HEAVY DUTY NETS SAFETY NETS. SIANG MAY 51 Ubi Avenue 1, #03-03 Paya Ubi Industrial Park ingapore RASCHEL MACHINE EXPAND YOUR PRODUCTION AGRICULTURE NETS FISHING NETS HEAVY DUTY NETS SAFETY NETS SHADE NETS SPORTS NETS SIANG MAY 51 Ubi Avenue 1, #03-03 Paya Ubi Industrial Park ingapore - 408933 Tel:

More information

30 A AC/DC Current Probe TCP0030A Datasheet

30 A AC/DC Current Probe TCP0030A Datasheet 30 A AC/DC Current Probe TCP0030A Datasheet Split-core construction allows easy circuit connection High accuracy with typically less than 1% DC gain error Low noise and DC drift 3rd party safety certification

More information

Who Reads and Who Follows? What analytics tell us about the audience of academic blogging Chris Prosser Politics in

Who Reads and Who Follows? What analytics tell us about the audience of academic blogging Chris Prosser Politics in Who Reads and Who Follows? What analytics tell us about the audience of academic blogging Chris Prosser Politics in Spires @caprosser 1 What do we want to know about the audience for academic blogging?

More information

BERNINI PANIC DEVICES

BERNINI PANIC DEVICES BERNINI PANIC DEVICES With EC mark, in compliance with standard EN 25:2008 Exclusive Pininfarina design Complete application adaptability Fast and easy installation Functional safety and reliability Also

More information

The compact test- disconnect terminal interface system for protection and secondary technology

The compact test- disconnect terminal interface system for protection and secondary technology POCON POWER Connector The compact test- disconnect terminal interface system for protection and secondary technology POCON the compact test-disconnect terminal interface system Safe control and testing

More information

Welcome to the world of RED Spring Units

Welcome to the world of RED Spring Units Welcome to the world of RED Spring Units About us Welcome to the world of RED Spring Units... a world created by high quality spring units designed to ensure good and healthy sleep, a world built on knowledge,

More information

Process Control HPP-25

Process Control HPP-25 Process Control HPP-25 Riveting process monitoring 6 different control parameters Touchscreen operation Windows diagnostics software Industrie 4.0 ready...joining is our business worldwide! Process Control

More information

Sideboard Sizes. SB12 sideboard 1200 metric (mm) W1200 D500 H750 imperial (in) W47 D19.5 H29.5

Sideboard Sizes. SB12 sideboard 1200 metric (mm) W1200 D500 H750 imperial (in) W47 D19.5 H29.5 Sideboard 000 Shard coatstand Sideboard 00 Sideboard 600 Design sideboard Sideboard is designed to fulfil the primary function of storage, whilst sitting un-noticed in a space; equally, Sideboard holds

More information

MISSION. 4 key-points for a firm which is a leader in the production of adhesives:

MISSION. 4 key-points for a firm which is a leader in the production of adhesives: THE COMPANY Technology, innovation and experience are the values of ICAT, which has been devoted to the development of gluing solutions for more than 30 years. ICAT is nowadays one of the main European

More information

Personnel in Machining

Personnel in Machining LIST OF EQUIPMENT PREMISES AND WORKSHOPS Functions - Design and engineering - Project management - Quality and HSE assurance - Thermal shape and precision cutting - Edge preparation and bevelling - Bending

More information

Walkie Talkie APMP300. User manual

Walkie Talkie APMP300. User manual Walkie Talkie User manual Table of contents 1. Safety 1 1.1 Intended use 3 1. Labels in this manual 3. Preparations for use.1 Unpacking 4. Package contents 5.3 Charge the battery.4 Insert batteries 3.

More information

Leading French Manufacturer of Furniture Components

Leading French Manufacturer of Furniture Components Leading French Manufacturer of Furniture Components Interior fittings, institutions, industry, recreation Interior Fittings Kit & Folding Wrapped Drawers, Solid Drawers Plywood Birch Drawers and Storage

More information

DM&E CORPORATION EQUIPMENT AND FACILITIES LISTING

DM&E CORPORATION EQUIPMENT AND FACILITIES LISTING DM&E CORPORATION EQUIPMENT AND FACILITIES LISTING DM&E Corporation PO Box 580 Shelby, NC 28151-0580 (704) 482-8876 Fax: (704) 484-8326 Email: sales@dmecutter.com Website: www.dmecutter.com Updated January

More information

PRIMARY NEEDS HEALTH FEEDING CLOTHING HOUSING

PRIMARY NEEDS HEALTH FEEDING CLOTHING HOUSING .TECHNOLOGICAL PROCESSES. 1. Technology in response to human needs Technology is a body of knowledge used to create tools, develop skills, and extract or collect materials. It is also the application of

More information

QUALITY STAYS METALLIC MANUFACTURING starts up in Monterrey, Nuevo Leon Begins to export products to the UnitedStates.

QUALITY STAYS METALLIC MANUFACTURING starts up in Monterrey, Nuevo Leon Begins to export products to the UnitedStates. 01 TIME PASSES QUALITY STAYS 1993 METALLIC MANUFACTURING starts up in Monterrey, Nuevo Leon. 2011 Begins to export products to the UnitedStates. TODAY Is leader in manufacturing steel and aluminum tubular

More information

DAIRAGO factory Via del Lavoro n. 1

DAIRAGO factory Via del Lavoro n. 1 DAIRAGO factory Via del Lavoro n. 1 PRODUCTION CYCLE Since it was founded in 1976, Fiborsin srl has concentrated on the extrusion and processing of plastic materials. In addition, the Company operates

More information

Mold details: Mirror polish. Type: Plastic moulding Core surface finish: Production Material: PC Cavity surface finish: Mirro Polish

Mold details: Mirror polish. Type: Plastic moulding Core surface finish: Production Material: PC Cavity surface finish: Mirro Polish Welcome to shop for high quality plastic injection mold manufacturer with competitive price from our company - one of the leading manufacturers and suppliers in China. Top quality, high efficiency, wide

More information

UPHOLSTERED SECTIONALS WITH ARM AND BACKREST

UPHOLSTERED SECTIONALS WITH ARM AND BACKREST Victor Vasilev 2014 NEW UPHOLSTERED SECTIONALS WITH ARM AND BACKREST L R L R 25 85 43 43 25 25 25 125 125 25 comes from the designer s desire to endow a soft object with the identifying mark of the iconic

More information

BUMESH TECHNICS. Automotive.

BUMESH TECHNICS. Automotive. BUMESH TECHNICS Automotive Company / BUMESH TECHNICS AUTOMOTIVE BUMESH TECHNICS has been founded as a supplier in Automotive Industry. Main Activities A) DIE DESIGN & MANUFACTURING ( Tandem ; Progressive

More information

Operating Instructions

Operating Instructions 330 Preferred Care Recliner Operating Instructions 330-INS-LAB Graham-Field Health Products 2005 IMPORTANT: READ THIS MANUAL BEFORE OPERATING YOUR ORTHO-BIOTIC PREFERRED CARE RECLINER WARNINGS Warning:

More information

FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1

FRP GATES MM08 FRP GATES Rev. 3 COMPOSITE SOLUTION PAGE 1 FRP GATES MM08 08.02.2016 Rev. 3 FRP GATES COMPOSITE SOLUTION PAGE 1 SUMMARY 1. USES AND CHARACTERISTICS... 3 2. EMPLOYMENT FIELDS... 4 3. MATERIALS... 5 3.1 TABLE OF PROFILES AND STRUCTURAL ACCESSORIES...

More information

1204 Reflected Wave Reduction Device

1204 Reflected Wave Reduction Device Instructions 1204 Reflected Wave Reduction Device (Catalog Number 1204-RWR2-09-B, C) This publication will guide you through installation (including mounting, wiring and grounding procedures) of the 1204

More information

Walkie Talkie APMP500. User manual

Walkie Talkie APMP500. User manual Walkie Talkie APMP500 User manual 1. Table of contents SAFETY 1.1 Intended use 1. Labels in this manual 1.3 General safety instructions 5. Preparations for use 5.1 Unpacking 5. Package contents.3 Place

More information

Seating 1 Technical Specifications. Eames Aluminum Group and Soft Pad Group Chairs

Seating 1 Technical Specifications. Eames Aluminum Group and Soft Pad Group Chairs Seating 1 Technical Specifications Eames Aluminum Group and Soft Pad Group Chairs Eames Aluminum Group and Soft Pad Group Chairs 2 Seating Measurements Chair Seat Seat Depth Seat Width Seat Angle Aluminum

More information