Composites in Automotive
|
|
- Sheryl Tate
- 6 years ago
- Views:
Transcription
1 Composites in Automotive Prof. Dr.-Ing. Dipl.-Wirt. Ing Thomas Gries
2 Contents Carbon Fibre Textile Manufacturing Resin Impregnation Simulation / Quality Assurance Recycling Textile solutions for mobility NRW / RWTH / ITA 2
3 From the fibre to the product 3
4 Demand [t] Global demand for carbon fibre Year 4
5 Carbon Fibre
6 Carbon ITA Production capabilities Scale laboratory discontinious quasi-continious continious Equipment Thermal Analysis Chamber Oven Laboratory Line Pilot Line Quantities 5 10 cm 1 m 100 m bobbin Dec
7 MegaCarbon Recource-efficient and highly productive production of carbon fibres for a wide application spectrum Objectives: Increase of production speed Increase of capacity of the new production plants Lowering the power demand Polymerisation Spinning Solution Spinning Procedure Stabilisation Carbonisation Finishing 7
8 Textile Manufacturing
9 FRP Steel Textile Manufacturing Tailored Blank Tailored Tube Assembly Line Tailored NCF Tailored Braid Preformcenter 9
10 Production technology for Tailored-NCF Enhancement of multi-axial warp-knitting machinery Warp-knitting machine Source: LIBA Maschinenfabrik 10
11 Resin Impregnation BMW M3 Large scale production 70 /day 1000 /day Minutes Seconds 11
12 State Of The Art - Prepreg 12
13 New Technologies at RWTH Gap Impregnation IKV Discharge of Matrix Spread of Matrix Preform Mould Flow front Frame Matrix 13
14 Simulation/ Quality Assurance
15 Modelling Textile characterization Friction coefficient Geometry Shearability Modelling Kinematic simulation Level Macro (Meso, Micro) Validation Digital Image Correlation (DIC) 15
16 Real Time Quality Assurance Falcon (Fibre Automatic Live Control) 16
17 Recycling
18 The value chain Starting materials UD- and nonwoven Tapes Simulation and Design Thermoforming and Function integration Multi-Material- Component Automobile sector Goal: Cost effective concept for mass production of composites 11ic0003_Short presentation_2012.pptx Slide Nr CAMISMA 2012 All rights reserved
19 Textile solutions for mobility Quelle BMW 19
20 Lightweight construction with FRP Textile fabrics Braiding technologie Tailored NCF 3D-Fabric Braiding of a hub Crashabsorber 3D-Preforming Prepregging ITA-Preformcenter FRP convertible roof Simulation Coating ficility 20
21 Smart Textiles and integration of functions Textile bus systems Sensor systems Conductive paths Conductive fabrics Sensor rope Sensor wear Textile integrated illumination Heated textiles LEDs on textiles Illuminated structures Source: ITCF Denkendorf Heated fabric Source: Sefar Heated fabric Source: TITV Greiz 21
22 Technical fibres for innovative materials Additives in thermoplastic fibres Piezoelectric fibres PSU Polysulfon PEEK Polyether ether-keton PEI Polyetherimid Luminescent fibres High temperature fibres PVDF- Fibres Fibre integration High modulus fibres Hybrid fibres Carbon fibre Source: Zoltec Glass fabric Hybrid yarn Thermoplastic FRP frontend Source: Ticona 22
23 Recycling of FRP Opening of fibres Yarn formation Laboratory Card Laboratory Card Ring spinning Opening roller Formation of nonwovens Bonding of Nonwovens Aerodynamic web formation web on screen Consolidation of nonwovens Recycled nonwoven 23
24 RWTH Aachen Campus New form of cooperation between industry and university: 15 relevant clusters Exchange of research results, employees, further resources Biggest European technology campus 2 Bill investment ITA till 2020 Source: rha reicher haase + associierte 19
25 Aachen Composites Engineers - ACEs Integrated solutions for textile composites Production technology Textile technology Plastic processing Automotive applications Component design Objectives Interdisciplinary innovations and enhancements of: Products, processes, production machines Design, simulation and measurement technique Technology and know-how transfer between research and industry Technologies for composite structures in automotive applications Source: ACEs 20
26 RWTH Aachen University and ITA RWTH Aachen University 4500 scientists 2300 service personnel 36,000 students 750 Mill. budget 40 % research projects Institut für Textiltechnik (ITA) 80 scientists 55 service personnel 190 graduate research assistants 50 students majoring in textile technology per year 14,3 Mill. budget 90 % research projects 21
27 TFI: Institut für Bodensysteme an der RWTH Aachen e.v. Organisation Our Strengths: Fibres Textile structures Production technology Application Textile Engineering Fibre Reinforced Composites Medicine / Smart Textiles Man Made Fibre Technology 22
28
3D Fabrics for Composites
3D Fabrics for Composites Thomas Gries Institut für Textiltechnik der RWTH Aachen University, Aachen, Germany Benedikt Wendland, Timm Holtermann, Thomas Gries Contents Characteristics and types of 3D-textiles
More informationWeft insertion via magnetic timing belt
Weft insertion via magnetic timing belt Jan Vincent Jordan, M.Sc. Maximilian Kemper, M.Sc. Mario Gollasch, M.Sc. Dipl.-Ing. Wilfried Renkens Adjunct Prof. (Clemson Univ.) Dr.-Ing. Yves-Simon Gloy Univ.-Prof.
More informationIndustry 4.0 Changing the Global HR Landscape
RWTH, Peter Winandy Industry 4.0 Changing the Global HR Landscape Prof. Prof. Dr. Thomas Gries It s all about People and Cooperation Korea-Germany Guest-Workers Miners and Nurses Korea-Germany Guest-Workers
More informationTextile Production Technologies for Multi- Material-Lightweight Components
Textile Production Technologies for Multi- Material-Lightweight Components JEC World 2017 Conference - Production Technology for Multi-Material Lightweight Components - Hans-Christian Früh RWTH, Peter
More informationRegistration for exhibitor space and product entries
1 Registration for exhibitor space and product entries Planning start: 9th May 2016 Organizer: Please return to saltex@messedornbirn.at or via fax +43 5572 305-9414 Messe Dornbirn GmbH Messeplatz 1, A-6854
More informationLIBA Multi Compact Fabric Ein neues Textil stellt sich vor
LIBA Multi Compact Fabric Ein neues Textil stellt sich vor Stuttgart 18.09.2013 Content Company profile Multiaxial structures Applications MAX 4 technology Multi Compact Fabrics 2 Content Company profile
More informationSmart Textronics: Adding Function from Fiber to Fabric 9 th November, Munich, Benjamin Mohr, Volker Lutz, Thomas Gries. RWTH, Peter Winandy
Smart Textronics: Adding Function from Fiber to Fabric 9 th November, Munich, Benjamin Mohr, Volker Lutz, Thomas Gries RWTH, Peter Winandy 2 3 4 5 Fiber based solutions 4 you RWTH, Peter Winandy 7 8 Institut
More informationINDUSTRIAL WOVEN NON-CRIMP MULTILAYER FABRICS FOR BETTER IMPACT PROPERTIES
INDUSTRIAL WOVEN NON-CRIMP MULTILAYER FABRICS FOR BETTER IMPACT PROPERTIES M. Haeske a*, B. Wendland a, L. Van der Schueren b, Y.-S. Gloy a, T. Gries a a Institut für Textiltechnik of RWTH Aachen University,
More informationSELVEDGE FREE WOVEN NARROW FABRICS FOR MEDICAL APPLICATIONS
SELVEDGE FREE WOVEN NARROW FABRICS FOR MEDICAL APPLICATIONS Y.-S. GLOY, C. ROSIEPEN, T. GRIES Institut für Textiltechnik der RWTH Aachen University Aachen, Germany INTERNATIONAL CONGRESS ON HEALTHCARE
More informationHORIZON Intelligent cross-linked and flexible process chain
Intelligent cross-linked and flexible process chain Aachen University enjoys an outstanding reputation and stands for engineering Aachen University Established 1870 40,000 students 10,000 mechanical engineering
More informationBraiding Technology: Machine Concepts, Processes and Applications
Braiding Technology: Machine Concepts, Processes and Applications Prof. Klaus Drechsler JEC Conference March 2017 SGL Institute for Carbon Composites, TU München Fraunhofer IGCV, Augsburg Overview History
More informationIntegrated Tool for Simulation of Textile Composites
Integrated Tool for Simulation of Textile Composites SIXTH FRAMEWORK PROGRAMME Proposal no.: 516146 Aerodays Vienna June 2006 Marinus Schouten 06-2006 EADS-Corporate Research Centre 1 General objectives
More informationTEXTILE REINFORCEMENTS WITH SPREAD AND COMMINGLED YARN STRUCTURES
International RILEM Conference on Material Science MATSCI, Aachen 2010 Vol. I, ICTRC 37 TEXTILE REINFORCEMENTS WITH SPREAD AND COMMINGLED YARN STRUCTURES S. Janetzko, P. Kravaev, T. Gries, Institut für
More informationRiding the Wave of Technical Textiles: Opportunities and Challenges for African Textile Industry
Riding the Wave of Technical Textiles: Opportunities and Challenges for African Textile Industry Mohamad Midani, Ph.D. Assistant Professor, German University in Cairo intexive Technical Consulting, Egypt
More informationHYBRID REINFORCING FABRICS FOR ADVANCED POLYMERIC COMPOSITES
HYBRID REINFORCING FABRICS FOR ADVANCED POLYMERIC COMPOSITES NICOLAE TARANU 1, LILIANA BEJAN 2, GEORGE TARANU 1, MIHAI BUDESCU 1 1 Technical University Gh. Asachi Iasi, Department Civil Engineering B.dul
More informationMeeting the volumes, cost and technical challenges for further penetration of composites in airframes
Meeting the volumes, cost and technical challenges for further penetration of composites in airframes Prof. Prasad Potluri EPSRC High Value Manufacturing Catapult Fellow Professor of Robotics and Textile
More informationA method for plaiting polymer fibre around natural yarn to form a composite fabric
Natural Filler and Fibre Composites: Development and Characterisation 10 A method for plaiting polymer fibre around natural yarn to form a composite fabric T. Izumi 1, T. Matsuoka 1, T. Hirayama 1, H.
More information» Facing the Smart Future «
Industrie 4.0 Internet of Things» Facing the Smart Future «Smart Products, Production and Services Internet of Services Industrial Internet Digital Manufacturing Call for Partners: Consortium Study Our
More informationLOCALLY ADAPTED BIAXIAL WARP KNITTED TEXTILES AS REINFORCEMENT OF FOLDED CONCRETE ELEMENTS
LOCALLY ADAPTED BIAXIAL WARP KNITTED TEXTILES AS REINFORCEMENT OF FOLDED CONCRETE ELEMENTS A. Koch1, C. Kerschl2, T. Gries1 and W. Brameshuber2, 1Institut für Textiltechnik (ITA) of RWTH Aachen University
More informationASSESSMENT OF COMPOSITES REINFORCED WITH INNOVATIVE 3D WOVEN HOLLOW FABRICS
Munich, Germany, 26-30 th June 2016 1 ASSESSMENT OF COMPOSITES REINFORCED WITH INNOVATIVE 3D WOVEN HOLLOW FABRICS R. Geerinck 1, I. De Baere 1, G. De Clercq 2, J. Ivens 3 and J. Degrieck 1 1 Department
More informationExploring the full potential of Industry 4.0 in plastics processing
INSTITUT FÜR KUNSTSTOFFVERARBEITUNG IN INDUSTRIE UND HANDWERK AN DER RWTH AACHEN Exploring the full potential of Industry 4.0 in plastics processing Joint potential analysis and readiness study (Arburg)
More informationNOVEL THREE-DIMENSIONAL BRAIDING APPROACH
NOVEL THREE-DIMENSIONAL BRAIDING APPROACH AND ITS PRODUCTS F. Schreiber 1, F.K. Ko 2, H.J. Yang 2, E. Amalric 3, T. Gries 1 1 Institut für Textiltechnik, RWTH Aachen University Eilfschornsteinstrasse 18,
More informationCUSTOMISED BRATKE- COMPOUNDS
CUSTOMISED BRATKE- COMPOUNDS WELCOME TO THE PROFESSIONALS Are you looking for plastics that suit your exact expectations? We develop customised solutions for you and implement your request quickly and
More information+91-8048718632 Arrow Technical Textiles Private Limited http://www.arrowtechnicaltextiles.co.in/ We are a renowned manufacturer, supplier, distributor and importer of a wide range of Composite Raw Materials.
More informationFacing the Future: Additive Manufacturing SECOND ROUND. Call for Partners: Consortium Study. Our partners:
Facing the Future: Additive Manufacturing SECOND ROUND Call for Partners: Consortium Study Our partners: Additive Manufacturing: The New Industrial Revolution? Motivation Costs for additive manufactured
More informationABOVE & BEYOND Dipl.-Ing. Jörg Dittmann. Strategic partnership for new innovations and research on a new level
ABOVE & BEYOND Dipl.-Ing. Jörg Dittmann Strategic partnership for new innovations and research on a new level Scientific Campus ARENA2036 Active Research Environment for the Next generation of Automobiles
More informationThe Institute for Special Textiles and Flexible Materials
The Institute for Special Textiles and Flexible Materials Automated Manufacturing of Textiles with Integrated Electronic Components Uwe Möhring, Kay Ullrich Textile International Forum and Exhibition 2015
More informationComparison of the Mechanical Properties Between 2D and 3D Orthogonal Woven Ramie Fiber Reinforced Polypropylene Composites
Comparison of the Mechanical Properties Between 2D and 3D Orthogonal Woven Ramie Fiber Reinforced Polypropylene Composites Comparison of the Mechanical Properties Between 2D and 3D Orthogonal Woven Ramie
More informationNew textile technologies, challenges and solutions
New textile technologies, challenges and solutions Abstract R. Szabó 1, L. Szabó 2 1 Ingtex Bt, Nyáry P. u. 5., Budapest, Hungary, ingtex@t-online.hu 2 Óbudai Egyetem RKK Környezetmérnöki Intézet, Doberdó
More informationNEW APPROACHES IN TEXTILE AND IMPREGNATION TECHNOLOGIES FOR THE COST EFFECTIVE MANUFACTURING OF CFRP AEROSPACE COMPONENTS
ICAS 2002 CONGRESS NEW APPROACHES IN TEXTILE AND IMPREGNATION TECHNOLOGIES FOR THE COST EFFECTIVE MANUFACTURING OF CFRP AEROSPACE COMPONENTS Dr. Jürgen Brandt, Andreas Geßler, Jürgen Filsinger e-mail:
More informationRENEWABLE RESOURSE INTEGRATION IN BIODEGRADABLE COMPOSITES
ISSN 1691-5402 ISBN 978-9984-44-071-2 Environment. Technology. Resources Proceedings of the 8th International Scientific and Practical Conference. Volume I1 Rēzeknes Augstskola, Rēzekne, RA Izdevniecība,
More informationKolfiberarmering för avancerade tillämpningar
Kolfiberarmering för avancerade tillämpningar 2012-10-10 About Oxeon Business Idea Oxeon develop produce and sell optimized spread tow reinforcement solutions, TeXtreme, to customers with a need for ultra
More informationInformation Memorandum Related to Licensing of Patented Technology and Trade Secret Know-How of TITV Technology 27 September 2016
Information Memorandum Related to Licensing of Patented Technology and Trade Secret Know-How of TITV Technology 27 September 2016 1. Overview of Smart Textile Technology Available for Licensing Luxtura,
More informationNon-woven. Bonding systems in non-woven. Discussion. Needled felts Adhesives Heat bonding Stitch bonding
Non Woven Fabric (2) Dr. Jimmy Lam Institute of Textiles & Clothing Non-woven Bonding systems in non-woven Needled felts Adhesives Heat bonding Stitch bonding Discussion Introduction In last section, we
More informationCHAPTER 3 MATERIALS AND METHODS
35 CHAPTER 3 MATERIALS AND METHODS 3.1 INTRODUCTION Electrically conducting and/or ferromagnetic materials in combination with fibres and textiles are proven to be effective in shielding against electromagnetic
More informationPrototyping Services
Prototyping Services Introduction Our prototyping and process development team provides fabrication services for all composite related parts. We specialize in custom shaping by machine or hand and can
More informationEXPERIMENTAL FORMING STUDIES ON 3D WARP INTERLOCK FABRICS
EXPERIMENTAL FORMING STUDIES ON 3D WARP INTERLOCK FABRICS C. Dufour a,b*, F. Boussu a,b, P. Wang a,b, D. Soulat a,b a Univ. Lille Nord de France, F-59000 Lille, France b ENSAIT, GEMTEX, F-59100 Roubaix,
More informationEFFECTS OF STITCH PATTERN ON THE MECHANICAL PROPERTIES OF NON-CRIMP FABRIC COMPOSITES
EFFECTS OF STITCH PATTERN ON THE MECHANICAL PROPERTIES OF NON-CRIMP FABRIC COMPOSITES Leif E. Asp, Fredrik Edgren and Anders Sjögren SICOMP AB, P O Box 14, SE-431 22 Mölndal, Sweden ABSTRACT Mechanical
More informationMechanical Properties of Glass Fiber Composites Reinforced by Textile Fabric
Environment. Technology. Resources, Rezekne, Latvia Proceedings of the 1 th International Scientific and Practical Conference. Volume I, 133-138 Mechanical Properties of Glass Fiber Composites Reinforced
More informationDORNIER COMPOSITE SYSTEMS
DORNIER COMPOSITE SYSTEMS CS Quality creates value COMPOSITE SYSTEMS MF 1 From flying people to flying threads 100 years ago all aircrafts were built of composite fiber materials, the natural composite
More informationCHARACTERIZATION OF THE DRAPABILITY OF REINFORCEMENT FABRICS BY MEANS OF AN AUTOMATED TESTER
CHARACTERIZATION OF THE DRAPABILITY OF REINFORCEMENT FABRICS BY MEANS OF AN AUTOMATED TESTER Mirko Christ 1, Andrea Miene 1, Ulrich Moerschel 2 1 Faserinstitut Bremen, Am Biologischen Garten 2, 28359 Bremen,Germany,
More informationVision. Tradition History. Nonwovens Technology. Applications in Various Industries
Division Nonwovens Tradition History Fleissner is an internationally operating, innovative and customer-oriented technology company committed to tradition. Founded in Asch/Bohemia in 1848, the company's
More informationElectronic supplementary material
Electronic supplementary material Three-dimensionally Deformable, Highly Stretchable, Permeable, Durable and Washable Fabric Circuit Boards Qiao Li 1, and Xiao Ming Tao 1,2 * 1 Institute of Textiles and
More informationTextiles and Design 2007 HIGHER SCHOOL CERTIFICATE EXAMINATION. Total marks 50. Section I Pages 2 4
2007 HIGHER SCHOOL CERTIFICATE EXAMINATION Textiles and Design Total marks 50 Section I Pages 2 4 General Instructions Reading time 5 minutes Working time 1 1 hours 2 Write using black or blue pen Write
More informationCHAPTER 7 DEVELOPMENT OF CHEMICAL BONDED NONWOVEN FABRICS MADE FROM RECLAIMED FIBERS FOR SOUND ABSORPTION BEHAVIOUR
99 CHAPTER 7 DEVELOPMENT OF CHEMICAL BONDED NONWOVEN FABRICS MADE FROM RECLAIMED FIBERS FOR SOUND ABSORPTION BEHAVIOUR 7.1 INTRODUCTION Nonwoven is a kind of fabric with orientation or random arrangement
More informationB.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 27 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21
More informationDRAPEABILITY OF GLASS AND STEEL FIBRES KNITTED FABRICS
THE 19 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS DRAPEABILITY OF GLASS AND STEEL FIBRES KNITTED FABRICS M. Barburski 1,2*, S. V. Lomov 1, K. Vanclooster 3, I. Verpoest 1 1 KU Leuven, Department
More informationCONTROLLER OF EXAMINATIONS. B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 28 For candidates admitted in Anna University,Chennai during Academic Years 22 & 23 PTCE22 PTGE2111 PTCE22 PTCE2252 PTCE2254 PTCE23 PTCE2255 PTGE21 PTCE2251
More informationSOLUTIONS, MACHINERY AND PLANTS FOR TEXTILE AND FOR NONWOVEN SINCE 1953
SOLUTIONS, MACHINERY AND PLANTS FOR TEXTILE AND FOR NONWOVEN SINCE 1953 Italian Quality in Machinery Construction Sicam s.r.l. (Società italiana Costruzioni Aeromeccaniche); via Selvanesco 57-20141-Milano-Italia;
More information+91-8048762885 J. K. Overseas http://www.jk-overseasexport.com/ Exporter and importer of asbestos mill board, asbestos jointing sheets, engineering plastic products, gaskets.we have Sister Concern Company
More informationWORKING of nidaplast
nida 8/gb - 03.07.07 Technical Information. 2 WORKING of nidaplast nidaplast is a polypropylene honeycomb covered on both faces with a soft polyester nonwoven fabric. It is available in 2500 x 1200 mm
More informationEFFECTS OF WARP KNITTED FABRICS MADE FROM MULTIFILAMENT IN CEMENT-BASED COMPOSITES
1 st International Conference Textile Reinforced Concrete (ICTRC) 23 EFFECTS OF WARP KNITTED FABRICS MADE FROM MULTIFILAMENT IN CEMENT-BASED COMPOSITES Zvi Cohen (a), Alva Peled (b), Yonatan Pasder (a),
More informationUSTER LABORATORY SYSTEMS
USTER LABORATORY SYSTEMS APPLICATION REPORT Improved analysis of yarns in the laboratory THE STANDARD FROM FIBER TO FABRIC Richard Furter Novmeber 2007 SE 611 Copyright 2007 by Uster Technologies AG All
More informationDEVELOPMENT AND CHARACTERIZATION OF COMPOSITES CONSISTING OF WOVEN FABRICS WITH INTEGRATED PRISMATIC SHAPED CAVITIES
DEVELOPMENT AND CHARACTERIZATION OF COMPOSITES CONSISTING OF WOVEN FABRICS WITH INTEGRATED PRISMATIC SHAPED CAVITIES ABSTRACT R. Geerinck 1*, I. De Baere 1, G. De Clercq 2, J. Ivens 3, J. Degrieck 1 1
More information0226/18-V1-02 IMTEC HR. High mechanical Resistance fastener for composite materials
0226/18-V1-02 IMTEC HR High mechanical Resistance fastener for composite materials IMTEC HR Cold forged fastener BÖLLHOFF used its expertise in assembly technologies to combine the best of metals and plastics.
More informationAnalysis of the multilayer woven fabric behaviour during the forming process. Focus on the loss of cohesion within the woven fibre network.
Analysis of the multilayer woven fabric behaviour during the forming process. Focus on the loss of cohesion within the woven fibre network. Ahmad Rashed Labanieh a*, Christian Garnier a, Pierre Ouagne
More informationSimulation of the Drapability of Textile Semi- Finished Products with Gradient-Drapability Characteristics by Varying the Fabric Weave
Matthias Hübner, Olaf Diestel, Cornelia Sennewald, Thomas Gereke, Chokri Cherif Institute of Textile Machinery and High Performance Material Technology, Technical University of Dresden, Hohe Str. 6, 01069
More informationREGIONAL INFRASTRUCTURES FOR GLOBAL ENTERPRISES AND SME
REGIONAL INFRASTRUCTURES FOR GLOBAL ENTERPRISES AND SME Prof. Dr.-Ing. Thomas Bauernhansl November 23 rd, 2015 1 Gross Capital Investment 1995 2012 in Manufacturing Industries Industry Investments are
More information*The type of stainless steel were 316L, the diameter of the fiber were 12 micron.
Advanced Materials Research Submitted: 2014-07-21 ISSN: 1662-8985, Vol. 1053, pp 93-96 Accepted: 2014-07-28 doi:10.4028/www.scientific.net/amr.1053.93 Online: 2014-10-20 2014 Trans Tech Publications, Switzerland
More informationCONTENTS. 37 Sperotto Rimar. 09 Introduction. 22 Our Brands. 13 Santex Rimar Group. 41 Solwa. 25 Cavitec. 47 Our Values. 18 Who we are.
1 CONTENTS 09 Introduction 22 Our Brands 37 Sperotto Rimar 13 Santex Rimar Group 25 Cavitec 41 Solwa 18 Who we are 29 Isotex 47 Our Values 21 Our Numbers 33 Santex 48 Contact TRADITION IS OUR STRENGTH
More informationIntroduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
More informationB.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 APRIL/MAY- 28 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21 PTCE2251
More informationStrategy for introducing 3D fiber reinforced composites weaving technology
Available online at www.sciencedirect.com Procedia Technology 1 (2012 ) 211 216 INSODE 2011 Strategy for introducing 3D fiber reinforced composites weaving technology Owais Anwar Golra a *, Jawad Tariq
More information3D Woven Textiles for Composite Applications. Presented at UMAMI. March 20, Steve Clarke T.E.A.M., Inc.
3D Woven Textiles for Composite Applications Presented at UMAMI March 20, 2018 Steve Clarke T.E.A.M., Inc. Company Profile Rhode Island based small business specializing in Textile Engineering and Manufacturing
More informationCONTINUOUS-LENGTH SPREAD TOW +α /-β FABRICS
1/7 CONTINUOUS-LENGTH SPREAD TOW +α /-β FABRICS Fredrik Ohlsson, Product Manager - Materials Dr. Nandan Khokar, R&D Manager Oxeon AB, Borås, Sweden ABSTRACT Fabrics with +α/-β orientation of spread tows
More informationPress release 04/04/2018
04/04/2018 Information Initiative at the Hannover Fair 2018 Research findings by the University of Stuttgart at the world s most significant trade fair Over the past years of international trade fair commitment
More informationExperimental characterization of the tensile behavior of a polypropylene/glass 3D-fabric: from the yarn to the fabric
Experimental characterization of the tensile behavior of a polypropylene/glass 3D-fabric: from the yarn to the fabric Jean-Emile Rocher, Samir Allaoui, Gilles Hivet, Eric Blond To cite this version: Jean-Emile
More informationIntegrative Production Technology
Cluster of Excellence Integrative Production Technology for High-Wage Countries Self-optimisation of the Weaving Process Image: Picanol Self-optimisation of the Weaving Process Introduction Weaving is
More informationPowertrain Manufacturing for Heavy Vehicles R&D Cluster
Powertrain Manufacturing for Heavy Vehicles R&D Cluster The Next Generation of Powertrain Manufacturing in cooperation with: part of RI.SE part of RI.SE powertrain manufacturing for heavy vehicles application
More informationFibres and polymers used in Textile Filtration Media
Fibres and polymers used in Textile Filtration Media Presented by Robert Bell Robert G Bell Projects October 2012 The most ingenious filter is useless without an adequate filter medium So what is filter
More informationMaple Veneer. Learning
Maple Veneer Source: Maple tree (hardwood) Construction: Tight grain with fine even texture Properties: This veneer is flexible in one direction (in line with the grain), maple is very durable Other learning
More informationSIMULATION OF 3D OVERBRAIDING SOLUTIONS AND CHALLENGES
SIMULATION OF 3D OVERBRAIDING SOLUTIONS AND CHALLENGES Guido Grave August Herzog Maschinenfabrik GmbH & Co. KG Am Alexanderhaus 160, D-26127 Oldenburg info@herzog-online.com Karin Birkefeld, Tjark von
More informationDesign and development of three-dimensional woven fabrics with stab resistance
Proceedings of the 8 th World Conference on 3D Fabrics and Their Applications Manchester, UK, 28-29March 2018 Design and development of three-dimensional woven fabrics with stab resistance Shiyan Lu 1,
More informationMOULDABILITY OF ANGLE INTERLOCK FABRICS
FPCM-9 (2008) The 9 th International Conference on Flow Processes in Composite Materials Montréal (Québec), Canada 8 ~ 10 July 2008 MOULDABILITY OF ANGLE INTERLOCK FABRICS François Boussu 1, 3, Xavier
More informationPRESSURE DISTRIBUTION AND SURFACE QUALITY DURING FORMING OF THERMOPLASTIC COMPOSITES WITH A COLLECTION OF RUBBER PARTICLES AS MOULD HALF
PRESSURE DISTRIBUTION AND SURFACE QUALITY DURING FORMING OF THERMOPLASTIC COMPOSITES WITH A COLLECTION OF RUBBER PARTICLES AS MOULD HALF V.Antonelli 12, R. Carbone 3, S. Lindstedt 4, R. Marissen 5 1 Delft
More informationM. Bücker*, M. Magin. Institute for Composite Materials, Erwin-Schrödinger-Straße 58, Kaiserslautern, Germany
TESTING OF THE STRENGTH OF AN ALTERNATIVE MANUFACTURING METHOD FOR BOLTED JOINTS USED IN A GFRP-ROTOR OF AN AXIAL-FLUX ELEKTRIC MOTOR FOR SERIAL PRODUCTION IN AUTOMOTIVE M. Bücker*, M. Magin Institute
More informationProcess control in. textile manufacturing. Abhijit Majumdar, Apurba Das, R. Alagirusamy andv.k.kothari. ppshr- Edited by. The Textile Institute > ±M
Woodhead Publishing Series in Textiles: Number 131 Process control in textile manufacturing Edited by Abhijit Majumdar, Apurba Das, R. Alagirusamy andv.k.kothari The Textile Institute WP WOODHEAD PUBLISHING
More informationOLAE in Horizon 2020 LEIT ICT WP DG CONNECT - European Commission
OLAE in Horizon 2020 LEIT ICT WP 2014-15 DG CONNECT - European Commission 11 December 2013 Horizon 2020, Industrial Leadership (LEIT) Priority An Overview of Calls related to OLAE LEIT ICT 3 2014 Advanced
More informationSEMPEO SQA Unit Code FP42 04 Producing Composite Mouldings using Wet Lay-up Techniques
Producing Composite Mouldings using Wet Lay-up Techniques Overview This standard covers a broad range of basic competences that you need to produce composite mouldings using wet-lay up laminating techniques.
More informationIMPETUS Rapid Tooling
IMPETUS Rapid Tooling www.impetus-engineering.de 1 Close-to-production parts from steel-mould within 4 weeks >> Design check by plastic technology experts and advice for optimization >> Close-to-production
More informationCONVERSIONS FOR PROJECTILE WEAVING MACHINES
CONVERSIONS FOR PROJECTILE WEAVING MACHINES A new lease of life for your machinery CREALET AG Alte Schmerikonerstrasse 3 8733 Eschenbach/SG Switzerland Tel. +41 (0) 55 286 30 20 Fax +41 (0) 55 286 30 29
More informationIonic Activated Viscose Fibres
49 th Man-Made Fibre Congress Dornbirn Ionic Activated Viscose Fibres Dr. Roland Scholz, R&D, Kelheim Fibres Gmb Ionic Activated Viscose Fibres Overview 1. Kelheim Fibres a short introduction 2. Viscose
More informationDEPARTMENT OF TEXTILE TECHNOLOGY
DEPARTMENT OF TEXTILE TECHNOLOGY Programmes offered Full Time B. Tech (Textile Technology) M. Tech (Textile Engineering and Management) Part time M. Tech (Textile Engineering) Curriculum is designed to
More informationINVESTIGATION OF PROCESS-RELATED DAMAGE DURING THERMAL PIERCING OF A THERMOPLASTIC COMPOSITE
THE 19 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS INVESTIGATION OF PROCESS-RELATED DAMAGE DURING THERMAL PIERCING OF A THERMOPLASTIC COMPOSITE N.W.A. Brown 1,2 *, C.M. Worrall 1, A. Kapadia 1,
More informationThis is a repository copy of Effect of Fibre Type on Mechanical Properties of Nonwoven Reinforced TPU Composites.
This is a repository copy of Effect of Fibre Type on Mechanical Properties of Nonwoven Reinforced TPU Composites. White Rose Research Online URL for this paper: http://eprints.whiterose.ac.uk/99852/ Version:
More informationQuantification of hierarchic multimodal pore structures in textiles by the example of knitted fabric structures
Quantification of hierarchic multimodal pore structures in textiles by the example of knitted fabric structures Annette Mark 1, Dr. Boris Bauer 1, Prof. Dr.-Ing. Götz T. Gresser 1 1 Institute of Textile
More informationThe Colbond acquisition. Performance Innovation Growth. Steve Good, MD Technical Textiles Division
The Colbond acquisition Performance Innovation Growth Steve Good, MD Technical Textiles Division Presentation overview Technical Textiles background Colbond Company Overview Markets Innovation Post merger
More informationThe Global Polypropylene Fiber Value Chain
The Global Polypropylene Fiber Value Chain Strategy The objective of FiberVisions is to meet and surpass customer demands and expectations. Being highly perceptive and identifying customer demands and
More informationRoyal Edge Engineering. Company Profile
Royal Edge Engineering Company Profile Overview Royal Edge Engineering Royal Edge Engineering Company, a multi-disciplined engineering company Providing Comprehensive Products and Services throughout the
More informationwhr Hossinger Kunststofftechnik GmbH
whr Hossinger Kunststofftechnik GmbH COMPETENCE Competence Projects Engineering Tooling Molding Innovation How Ideas Turn Into Products We are a creative and flexible development partner for exceptional
More informationMultidisciplinary. developers
Woodhead Publishing Series in Textiles: Number 139 Multidisciplinary know-how for smart-textiles developers Edited by Tilnde Kirstein. The Textile Institute WP WOODHEAD PUBLISHING Oxford Cambridge Philadelphia
More information3/5. Founding of the Construction Robotics Center on RWTH Aachen Campus Copyright: Center Construction Robotics
PRESS RELEASE Robotics for the building industry Liebherr, KUKA and Autodesk join with RWTH institutes in the Center Construction Robotics to research the automation of construction Aachen, July 20, 2018
More informationWeaving machines for 3D hybrid fabrics
Weaving machines for 3D hybrid fabrics Stäubli Group Technological solutions for a vast range of industries textile machinery, industrial connectors and robotics A family owned industrial company which
More informationConversion of Glass Reinforced and Polypropylene Matrix Hybrid Materials into Thermoplastic Laminates
Conversion of Glass Reinforced and Polypropylene Matrix Hybrid Materials into Thermoplastic Laminates Dr Hireni Mankodi 1 Associate Professor, Principal Investigator (MRP GUJCOST), Department of Textile,
More informationInnovative Production Technologies for Lightweight Automotive Composites - Tape Production, Tape Weaving and 3D Weaving
Innovative Production Technologies for Lightweight Automotive Composites - Tape Production, Tape Weaving and 3D Weaving BMWi USA Business Trip, Greenville, SC, September 28 th, 2017 Mario Krupka, DORNIER
More informationSIGRATEX. Textile Products Made from Carbon Fibers. Composite Materials. Broad Base. Best Solutions.
Textile Products Made from Carbon Fibers Composite Materials Broad Base. Best Solutions. SIGRATEX for fiber composites Under the trademark SIGRATEX, we manufacture textile products from highstrength carbon
More informationFibre Injection. The Revolution in Fancy Yarns.
Fibre Injection The Revolution in Fancy Yarns. 1 Think different, do it smart. Pure creativity. There are no more limitations to yarn designers creativity: think, program and get it done with CIS, the
More informationWET-LAID TECHNOLOGY IMPLEMENTATION IN REVALORIZATION OF SOLID WASTES GENERATED IN URBAN OR INDUSTRIAL ENVIRONMENTS.
Research Group on Materials and Sustainability Sagrario Gironés (sgirones@aitex.es) WET-LAID TECHNOLOGY IMPLEMENTATION IN REVALORIZATION OF SOLID WASTES GENERATED IN URBAN OR INDUSTRIAL ENVIRONMENTS. -
More informationThe regular sections in avr - Nonwovens & Technical Textiles
Nonwovens & Technical Textiles Tel. +49/(0)69/15 04 33-200, Fax: - 333 o.schneider@kepplermediengruppe.de Media Pack 2019 T The regular sections in avr - Nonwovens & Technical Textiles Readers of the magazine
More information»Blockchain for Industrial Applications«Trends, Challenges & Chances
Join the consortium to»blockchain for Industrial Applications«Trends, Challenges & Chances I guarantee you Blockchain will play an important role in every company Achim Berg President of Bitkom Start:
More information