Author: Jerry Pasewicz
|
|
- Calvin Terry
- 5 years ago
- Views:
Transcription
1 Author: Jerry Pasewicz As published in the IPCI Book. The conventional manner to repair damaged tortoiseshell has been to fill the frog with small pieces of tortoiseshell cut from combs, oriental fans, or other flea-market finds and glue the pieces into place using CA glue. However, results of this time-consuming method varied and, today, tortoiseshell has become very hard to find. To replace missing pieces, our workshop uses a low-viscosity, high-transparency optical epoxy. The low viscosity contributes to the quality of the result by allowing any bubbles trapped during pouring to flow out easily. The high transparency enables restoration of the clearest of tortoiseshells.
2
3 MATERIALS AND TOOLS good-quality, non-stretching transparent packing tape modelling clay 4 dental dappen dishes very low-viscosity, high-transparency optical epoxy (such as Epoxy Technology 301-2) a palette knife opaque pigments (available from Epoxy Technology) ethylene glycol monoethyl ether (Cellosolve) a spatula toothpicks
4 a cloth a matting agent (such as Aerosil) carving tools, including a shallow gouge, a chisel, knives, scrapers and files assorted abrasives, including micro-mesh mineral spirits alcohol dyes in powder form (such as Orasol Powdered dyes) Dyes in powdered form Powdered colours for mixing with Cellosolve.
5 PREPARING THE FROG Make sure the frog is clean and free of any loose tortoiseshell fragments. Carefully tape the parts of the frog that are not to be treated. Make a dam around the area to be filled. Packing tape works best for repairs to the back or along the edges of the frog; modelling clay is best for repairs to the flanks. MIXING AND TESTING THE EPOXY FILLER Ensure adequate ventilation in the work area when using epoxy. [1] Mix the epoxy as described in the instructions. Place the four dappen dishes on the workbench. Pour the mixed epoxy in clear form into the first dish. Pour the dye powder into the second dish and add a drop of the ethylene glycol monoethyl ether to dissolve it. [2] Add only as much as is needed to dissolve the powder; adding too much may affect the curing of the epoxy. When the colour seems to match the repair area, combine a small amount of the liquid dye and some clear epoxy in the third dish. Very little dye is required to colour the epoxy.
6 Dappen dishes with epoxy Dappen dishes with epoxy, concentrated colour, and coloured epoxies. You must now check the hue and opacity of the dyed epoxy. Dip the end of a toothpick into the filler, drop a small amount into the repair area, and hold the frog to a source of light to see if the filler matches the surrounding tortoiseshell. [3] Wipe away the test amount. Add more liquid dye or clear epoxy to the third dish, as necessary. In cases where less transparency is called for, opaque pigments may be added to the epoxy mixture. Keep testing the filler until you achieve a perfect match. [4] In most tortoiseshell frogs, the hue, intensity and opacity of the colour varies. Depending on the repair area, more than one colour will be needed for a suitable replacement. The fourth dish can be used to mix a second colour, if necessary.
7 ADDING THE MATTING AGENT AND APPLYING THE FILLER When the filler matches the hue and opacity of the repair area, add a small amount of matting agent. The reflectivity of the filler should match that of the surrounding tortoiseshell. Each repair is different, so it is necessary to experiment with the quantity of matting agent. Retest the filler in the repair area to confirm its suitability one last time. Pour the filler into the dam. Frog and modeling clay Hill tortoiseshell frog showing tape mask, clay dam and epoxy fill. Where the area to repair requires both a light and a dark portion of tortoisehell, use one toothpick to apply light-coloured epoxy and a second toothpick to apply dark-coloured epoxy.
8 Drop both colours into the matching portion of the repair area at the same time. Cure according to the instructions for the particlar climate conditions. SHAPING AND FINISHING THE REPAIRED AREA When the filler has cured, remove the dam. Use mineral spirits if the dam is made of tape; modelling clay will fall away easily. Carefully carve away the excess filler. Remove the tape from the parts of the frog that were not treated with mineral spirits. Wipe off any residue with a cloth and alcohol. Acknowledgements When I had the pleasure of working with David Burgess, he showed me a method of tortoiseshell replacement using polyesther resin. His experience is the basis for the technique presented in this article. 1. See Monona Rossol, Chemical Safety in the Workshop, 1: Ed.BACK TO POST 2. The same principles of colour matching used in retouching varnish apply here. See J&A Beare Ltd, Retouching Varnish on Stringed Instruments, 2:154-62; Stewart Pollens, Cleaning and Retouching Violin Varnish, with a Discussion of Colour Theory, ; Hans Weisshaar and Margaret Shipman, Violin Restoration: A Manual for Violin Makers (Los Angeles: Weisshaar-Shipman,1988), Ed.BACK TO POST 3. Use daylight or, if not strong enough, an artificial light source and ideally a full-spectrum light source.back TO POST 4. The repair, which should not show in natural conditions, will reveal itself under ultraviolet light.back TO POST Pasewicz, Jerry. Replacing Missing Tortoiseshell with Dyed Optical Epoxy. The Conservation, Restoration, and Repair of Stringed Instruments and Their Bows. Vol. 3. Montreal, London: IPCI-Canada, Archetype Publications, Print. Share this:
Eerie Halloween by Nunn Design
Eerie Halloween by Nunn Design Approximate finished length: 20 inches Beads and other products needed for necklaces: 1 - Pewter Itsy Square Bezel Pendant with Flat Loop by Nunn Design - Antique Gold -
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationUNIT REF: PO13K UNIT TITLE: KNOWLEDGE OF VEHICLE COLOUR MATCHING
UNIT REF: PO13K UNIT TITLE: KNOWLEDGE OF VEHICLE COLOUR MATCHING Level: 3 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO13 Rationale: This unit enables the learner
More informationInstallation Instructions Recommended Tools
Recommended Tools Tape Measure Sharp Knife Duct Tape Mineral Spirits Clean Cloth Isopropyl Alcohol Blunt Putty Knife Caulking Gun Caulking Trowel Material Sizing 1. Joints must be sized every 5-7 feet
More informationCOLOUR SHADES - OVERVIEW
Product Data Sheet Pad Printing Ink TP 218/GL Solvent Based Pad Printing Ink Range, 2-Component APPLICATION Pad printing inks for printing on glass, ceramics, duroplastics, metals as well as chromium and
More informationMold Release, Break-In, Maintenance and Storage. Linda Bergstrom
Mold Release, Break-In, Maintenance and Storage Linda Bergstrom Mold Release Requirements Form a barrier between the mold and molded part Provide a lubricating film which allows the molded part to be easily
More informationAK893 GLASS COAT GAUZY AGENT
A new FUTURE opens up for modelers. AK s R&D department, in its constant desire for evolution, has developed two new products specially designed to cover the modelers needs. Two different products for
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More informationCold curing adhesive K-X280
Instructions for use English Cold curing adhesive K-X280 A4048-1.0 en English 1 Safety instructions... 3 2 General information... 3 2.1 Scope of delivery for K-X280... 3 2.2 Accessories required for installation...
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationColorfil INSTRUCTIONS
Colorfil INSTRUCTIONS SUPPLIES REQUIRED: HOT AIR GUN DENATURED ALCOHOL CLEAN WHITE RAG NYLON BRISTLE SCRUB BRUSH (tooth brush) ORBITAL SANDER ORBITAL ABRASIVES SPRAY BOTTLE WITH WATER OPTIONAL: SCALES
More informationHINTS & TIPS. Page 1. November 5, 2014 Mixed Media by Pébéo - Hints and Tips Version 1.2 GENERAL:
Page 1 HINTS & TIPS GENERAL: Mixed Media by Pébéo paints may be used on Pébéo Liquid Art Panels, wood, artist grade composite wood surfaces (mdf and masonite), canvas, canvas panel, metal, glass, plastic,
More informationMarabu. Glass Ink GL. Field of Application. Characteristics
Screen Printing Ink for glass, ceramics, metals, aluminium, chrome-plated parts, coated substrates, and thermosetting plastics Satin-gloss finish, semi-opaque, fast drying 2-component-ink-system, dishwasherproof
More informationFinish / Case. Schaff Piano Supply Company Presents: Lacquer Stick Work. Basic Techniques. By Chuck Behm
Schaff Piano Supply Company Presents: Lacquer Stick Work Basic Techniques By Chuck Behm / Lacquer Stick Techniques Lacquer Stick Work* -Rationale- Lacquer stick work is appropriate for some repairs in
More informationMaking a Surface Coating Kersti Cox, Miami University, Oxford, OH
Making a Surface Coating Kersti Cox, Miami University, Oxford, OH To close the yellow note, click once to select it and then click the box in the upper left corner. To open the note, double click (Mac
More informationResin Tree Drop Earrings We look forward to bringing you exclusive innovations and distinctive products this year and beyond.
Resin Tree Drop Earrings We look forward to bringing you exclusive innovations and distinctive products this year and beyond. www.nunndesign.com www.nunndesign.com 1 SUPPLIES NEEDED: PE9217-2 Pewter Drop
More informationAmazing Clear Cast 80D Clear Epoxy
Technical Data Sheet Amazing Clear Cast 80D Clear Epoxy Product Description: Alumilite's Amazing Clear Cast is a clear casting and coating system that cures to a rigid, durable, clear plastic. Use Amazing
More informationProduct Data Sheet ADDITIVES FOR SCREEN PRINTING HM
Product Data Sheet ADDITIVES FOR SCREEN PRINTING HM INTRODUCTION Solvent based screen printing inks are generally delivered in a consistency which - apart from thinner addition - does not require any further
More informationIMAGESTAR SILICONE INK
PRODUCT INFORMATION GUIDE IMAGESTAR SILICONE INK 3500 Series RFU Textile Inks 1500 Series Pigment Concentrate Textile Inks COMPONENTS ImageStar 3500 Series RFU Silicone Ink Ready-For-Use Colors Color Gold
More informationProduct Data Sheet Awlwood MA Primers OJ3809 / OJ9809 / OJ7809 Specification Data
Specification Data Packaging: Product Code: Cleaning: Available in 1 quart packs OJ3809 Clear; OJ9809 Yellow; OJ7809 Red OT0200 Awlwood MA Brush Cleaner Volume Solids: 45% Specific Gravity: OJ3809-1.013
More informationTips & Tricks using Part 17
Tips & Tricks using Part 17 Making a Secret Door Using Mold #96...1 Using Cotton Swabs For Antiquing...4 Planning Dungeon Waterways...5 Pouring and Texturing Water...6 Making Water for Fountains...11 Tips
More informationMAKI G A STOCK IMPERFECTIO I VISIBLE
MAKI G A STOCK IMPERFECTIO I VISIBLE 1 There are a number of posts regarding how to make a stock imperfection invisible. Go from scratches to gouges to natural blemishes such as knots or mineral deposits
More informationClay Modeling Film. Features of Clay Modeling Film. Use Clay Modeling Film
Clay Modeling Film The series of Clay Modeling Film, originally developed by TOOLS INTERNATIONAL Corp, is mainly used for interior/exterior shape confirmation, checking highlights and qualification studies
More informationCOLOR CHARTS & PIGMENT INFORMATION
COLOR CHARTS & PIGMENT INFORMATION Watercolors, Gouache, Fluid and Heavy-Body Acrylics, Traditional and Fast Dry Oil Colors 112 WATERCOLORS 28 GOUACHE 51 FLUID ACRYLICS Page 3 Page 5 Page 7 56 HEAVY-BODY
More informationTechnical Product Information
O.D. Thermochromic Function: Irreversible Product Name: Kromagen Black K60-NH Last Revision: 11/02/2015 Technical Product Information Kromagen Black K60-NH can be supplied as a Concentrate, Water Based
More informationPAINT SYSTEMS Polyester yachts
PAINT SYSTEMS Polyester yachts Polyester osmosis renovation Polyester osmosis repair Polyester below the waterline Polyester above the waterline Polyester decks Polyester superstructure Polyester interior
More informationThe Process. Features & Benefits PAINT REMOVAL SYSTEM APPLY COVER REMOVE WAIT WASH
PAINT REMOVAL SYSTEM A REVOLUTIONARY, UNIQUE AND ENVIRONMENTALLY FRIENDLY PAINT REMOVAL/ STRIPPING SYSTEM Peel Away 1 Ideal for use on bricks, concrete, cast iron and pressed metal. Removes Oil, Enamel,
More informationBuilding Instructions ARTEMIS Sailing Canoe Workshop and Tools Version 1.0 Brian Pearson / Dr. Axel Schmid Two Sawhorses. Workshop and Tools
Building Instructions ARTEMIS Sailing Canoe Two Sawhorses Workshop Yes, you can build the ARTEMIS sailing canoe in the garage, with good lighting, and assuming a power supply. To have room to work it needs
More informationWorking with Resin Models
Working with Resin Models This article will run through the basic techniques and methods required to get the most out of preparing, cleaning up and assembling Forge World s resin kits. If you need extra
More informationChapter 1 Sand Casting Processes
Chapter 1 Sand Casting Processes Sand casting is a mold based net shape manufacturing process in which metal parts are molded by pouring molten metal into a cavity. The mold cavity is created by withdrawing
More informationStudent Sheet. P003S: Making Paint with Minerals
Student Sheet In this practical I will be: Creating egg tempera paints and oil paints from different types of minerals. Evaluating the different paints, looking at various aspects, including: o what colours
More informationMarabu. Libragloss LIG. Field of Application. Characteristics
Screen Printing Ink for PVC self-adhesive foils, rigid PVC, polystyrene, ABS, SAN, polycarbonate, acrylics, paper, pasteboard, cardboard, wood Glossy, medium opaque, fast drying, block resistant, PVC-free,
More informationRestoration of Circa 1900 Menzenhauer/Oscar Schmidt Niagara Model Chord Zither
Restoration of Circa 1900 Menzenhauer/Oscar Schmidt Niagara Model Chord Zither Completed by Ron Cook March 2014 For Angela Bostain 1 Background Chord zithers, often called Guitar Zithers, were very popular
More informationBuilding Instructions ARTEMIS Sailing Canoe Day Six Version 1.0 Brian Pearson & Dr. Axel Schmid Day Six. Align and Glue Planks
Version 1.0 Brian Pearson & Dr. Axel Schmid 2016 Align and Glue Planks Steps: Align boat, check dimensions Join planks provisionally Pull wires Glue the outside planks Tools and Materials: Epoxy putty
More informationProfessional acrylic paints, mediums and tools
Professional acrylic paints, mediums and tools HISTORICAL PERSPECTIVE 1905 First acrylic resins produced in Germany 1930 s First use of synthetic binders by Mexican Muralists - silicates - not acrylics
More informationWOOD FINISH MAINTENANCE: notes and advices for the maintenance of Albertini windows and doors
WOOD FINISH MAINTENANCE: notes and advices for the maintenance of Albertini windows and doors Your Albertini windows and doors have been treated as follows: One flow coat application of preservative stain;
More informationLearn to. Brush Paint Model Airplanes
Learn to Brush Paint Model Airplanes Table of Contents Model Paints... 4 Brushes... 6 Workspace Setup... 7 Surface Preparation... 9 Painting Procedure... 10 Paintbrush Cleanup... 14 Masking... 15 Dry-brushing...
More informationMagnetpaint & Sketchpaint
Magnetpaint & Sketchpaint Turn any smooth surface into a magnetically receptive whiteboard MagnetPaint is an exciting product that allows you to paint your own magnetic surface on any flat area. SketchPaint
More informationMarabu. Tampacure TPC. Field of application. UV-curable, high gloss, good opacity, 1- or 2-component ink system, resistant to chemicals
Pad printing ink for ABS, rigid PVC, some PC, PS, and PMMA materials, pretreated PE and PP, as well as some metals, and varnished surfaces UV-curable, high gloss, good opacity, 1- or 2-component ink system,
More informationVICINITY WHITEBOARD PAINT. Installation Guidelines
VICINITY WHITEBOARD PAINT Installation Guidelines Components Installation Kit Preparation Whiteboard Paint Aerated Stir Stick Drop Sheet Universal Undercoat Base Activator Cutting-In Roller Filling-In
More informationPROJECT BEGINNER/INTERMEDIATE METAL/RESIN
PROJECT BEGINNER/INTERMEDIATE METAL/RESIN FCT-CR-091816_05 A photograph taken by the Hubble Space Telescope inspired the design of this 13 4 x 1½-in. (44 x 38 mm) pendant. 2009 Kalmbach Publishing Co.
More informationPaint and Decals. Adequate ventilation is required when working in a confined area with paint and paint-related chemicals.
Service Guide Paint Repair Paint and Decals Utilimaster recommends that a professional body shop do all paint repairs. The service technician should read this entire procedure before working on the vehicle.
More informationAPPLICATION Pad printing inks for printing of non-treated polypropylene (PP) for applications not requiring high resistances.
Product Data Sheet Pad Printing Ink TP/PP & TP/PP-A Solvent Based Pad Printing Ink Range, 1-Component APPLICATION Pad printing inks for printing of non-treated polypropylene (PP) for applications not requiring
More informationGels, Pastes, Liquid Mediums & Additives
Gels, Pastes, Liquid Mediums & Additives There are far more acrylic mediums available than you may ever want to explore. It can get somewhat confusing. So, I will try to simplify it as much as possible,
More informationHEADING DESCRIPTION OF GOODS RATE OF DUTY
32.01 Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives. 3201.10.00 Quebracho extract Free kg 3201.20.00 Wattle extract Free kg 3201.90.00 Other Free kg
More informationLascaux Synthetic Resins and Varnishes
Lascaux Synthetic Resins and Varnishes Acrylic Resin P 550 (Plexisol) 40% gloss Organic solution of an acrylic resin based on butyl methacrylate Tg 25 C. pure, soft, thermoplastic acrylic resin lightproof
More informationMaintenance Guide for pre oiled floors
1 Maintenance Guide for pre oiled floors Congratulations! By opting for the quality of Solū wood flooring and the elegance of our exclusive collections, you have made the right choice! Follow the instructions
More informationInstructions for Making Repairs to 3M 8681HS Blade Tapes Installed on Enstrom Helicopter Blades.
REPORT NO: TITLE: Instructions for Making Repairs to 3M 8681HS Blade Tapes Installed on Enstrom Helicopter Blades. MODEL NO: All PREPAIRED BY: P.B. dupont CHECKED BY: APPROVED BY: 1. SCOPE This specification
More informationWOOD REPAIR TECHNIQUES
Interior Accommodation / Basic Wood Repair WOOD REPAIR TECHNIQUES 2003-06 INTRODUCTION During the past year we have found a few new items from our various wood repair suppliers to make repairs. Although
More informationGuide to. an Optimum Recyclability. of Printed Graphic Paper
Guide to an Optimum Recyclability of Printed Graphic Paper Guide to an optimum recyclability of printed graphic paper 1. Introduction This paper deals with the recycling of recovered graphic paper, for
More information1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time
How to apply Arctic Silver Premium Thermal Adhesive 1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time 5.
More informationpigment preparations for a colorful world
pigment preparations for a colorful world EMULSION PAINTS POWDER PIGMENTS MASTER- BATCHES LIQUID COLOURS COLOURANT PASTES SPECIALITIES COLOURS IN EVERY FORMS AND FACET PROFILE Since 1785, we have been
More information50 TIPS TO HELP YOU BE BETTER WITH RESIN. By Katherine Swift
50 TIPS TO HELP YOU BE BETTER WITH RESIN By Katherine Swift 2016 Resin Obsession, LLC, all rights reserved Gainesville, FL 32606 www.resinobsession.com May not be shared in any form without permission
More information6.5 PARTHENON HORSES OF HELIOS
6.5 PARTHENON HORSES OF HELIOS Cast before conservation Cast after conservation Graciela Ainsworth Sculpture Conservation 561 Cast before conservation Cast after conservation Graciela Ainsworth Sculpture
More informationMold Making Purpose: To replicate an object in another material, once or multiple times.
Purpose: To replicate an object in another material, once or multiple times. Basic Process: make or find original object attach clay tube for later pouring of new material (sprew hole) coat in mold release
More informationData sheet for pilot objects
Object: REF. PARISH CHURCH, TEST - GLASS Date: 12.01.2009 OBJECT IDENTIFICATION Site Burgdorf BE (Switzerland) Building Ref. Parish Church Location and orientation of the window Plan of the building Vestry
More informationThere are also videos for many products This can be found on the own channel of "Borma Wachs"
From now on we offer the high quality products of the company Borma Wachs from Italy. We have many products directly in stock. We can also provide you parts which are not listed in our stock program. There
More informationName; Juliet Kuruwaa Title; Making a windshield fearing for 9G ZAF. Date 14 th of October, 2011
Name; Juliet Kuruwaa Title; Making a windshield fearing for 9G ZAF. Date 14 th of October, 2011 Time 08 30am Location In front of the boat workshop Aim To make a fiber glass fearing for a windshield. Materials
More informationPAINTING AND DECORATING E2
Unit no: 280 Unit title: Prepare a work area ready to commence decorating Credit Value 1 Guidance: For this unit, any area that is suitable for painting and decorating may be used. Safely prepare a work
More informationINDUSTRIAL PAINTS INDUSTRIAL TOP COAT 6 GENERAL 6 ACRYLIC LACQUERS 8 ALKYD LACQUERS 10
COLORS www.soppec.com EVENT COLORS PRO TECH INDUSTRIAL PAINTS In all industrial or agricultural activities it is important to be able to carry out rapid repairs to damaged paintwork, (notably to machinery
More information380 Swimming Pool Paint
Issued 21 st April 2010 PRODUCT DATA SHEET UNPAINTED CEMENT 380 Swimming Pool Paint SURFACE PREPARATION New cement or render should be allowed to cure for at least 21-28 days before any preparation is
More informationBedtime for Bondo MERA Training
Bedtime for Bondo 2002 MERA Training Section 1: Making the Plug/Model This section will show the process of building a plug/model for a plaster mold.this will represent what the final fiberglass part
More informationSURFACE FINISH MAINTENANCE
SURFACE FINISH MAINTENANCE SURFACE FINISH MAINTENANCE Lumec strongly recommends that you maintain your luminaires twice a year in order to prolong the appearance of the finished surface. By following this
More informationFreehand Back-Filling: Polymer Clay and Resin Tutorial
Page 1 of 9 Eugena Topina, 2016 Freehand Back-Filling: Polymer Clay and Resin Tutorial This tutorial is offered for your personal use only. Please do not distribute. Back-filling is a simple and very versatile
More informationMOLD INSTRUCTION MANUAL
Medi-RDT MOLD INSTRUCTION MANUAL Disclaimer: For use in prescription pharmacy compounding only, in accordance with applicable law. MEDISCA makes no warranty or representation regarding the use of this
More informationRepairing Sheet-Molded Compound (SMC) With Epoxy
Repairing Sheet-Molded Compound (SMC) With Epoxy 1. Properties: A. It does not dent. B. It does not rust C. Panels are formed using a flat sheet or compound that is heat molded in a press. 2. Preparation
More informationShop and community News
W: murraysartandframing.com.au E: art@myart.com F: facebook.com/murraysartframing P: 07 4632 2727 Summer 2018 Shop and community News Once again we are drawing near to the end of the year. And what a year
More informationmiramondo Technical Informations 1/10 Hop Hop
1/10 Hop Hop Technical Informations Hop Hop 2/10 Dimensions 1300 Hop Hop 3/10 Dimensions 615 650 1300 1950 800 635 460 615 650 1300 1950 800 460 615 650 1300 1950 800 635 460 615 650 1300 1950 800 460
More informationSURFACE CASTING METHOD: For Molds & Core Boxes. Presented by: Hapco Inc.
SURFACE CASTING METHOD: For Molds & Core Boxes Presented by: Hapco Inc. RAPIDFIL Detailed Specifications STEP 1 SPACER LAYER Apply a layer of ¼ foam to create a uniform ¼ thickness around the pattern.
More informationBasic Stenciling Techniques
Metal Stencil Techniques For each technique you ll need the equipment listed in addition to your stencil and removable tape. To avoid bending your stainless steel stencils, keep them flat at all times.
More informationDesigned for Vectric by Michael Tyler
Project Tutorial Compatible with Current Version of: Featuring compatibility with nearly all CNC Machines Stone & Coral Inlay Vase Designed for Vectric by Michael Tyler It is our pleasure to provide our
More informationMarabu INFO. Tech. Pad Printing Auxiliaries and Additives. Appropriate use of Marabu s Additives and Auxiliaries for pad printing inks.
Pad Printing Auxiliaries and Additives Appropriate use of s Additives and Auxiliaries for pad printing inks Pad 2016 2. Aug 1. Viscosity Viscosity describes how thin (low viscous) or thick (highly viscous)
More informationTechnical Sheet 11.11
Technical Sheet ALPIlignum 11.11 Collection Wood Grey Product ALPI Dark Grey Lati Texture Quartered Size 3150x640 mm ALPIkord 11.11 K Size 2500x1250/3050x1300 mm Wax Groove Light Gloss Bright Gloss ALPIrobur
More informationSOLVENTS & RETARDERS STANDARD BUTYL CARBITOL PROPYLENE GLYCOL BUTYL CELLOSOLVE VINYL WASH THINNER N-116 XYLOL INK DEGRADIENT HO 1000 VARSOL
SOLVENTS & RETARDERS BUTYL CARBITOL A slow evaporating solvent used in diluting certain nylon inks. PROPYLENE GLYCOL An effective flow agent for water phase paints. It also retards the drying time. BUTYL
More informationBUREAU OF INDIAN STANDARDS. Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION
FOR BIS USE ONLY DOC:CHD 20 (1932)C December 2012 BUREAU OF INDIAN STANDARDS Draft Indian Standard TWO COMPONENTS HIGH BUILD EPOXY MICACIOUS IRON OXIDE (MIO) PIGMENTED INTERMEDIATE COAT SPECIFICATION (Not
More informationTips & Tricks using Part 24
Tips & Tricks using Part 24 Finishing the River Sections... 2 Making Tentacles... 4 Making Fish... 6 Adding the Water... 8 Making the Plank Bridge... 13 Making Crystal Piles... 15 Finishing Various Accessories...
More informationThe Most Beautiful, Longest-Lasting, High Gloss Shine for Brightwork VARNISH
The Most Beautiful, Longest-Lasting, High Gloss Shine for Brightwork VARNISH P R O D U C T S A N D A P P L I C A T I O N S Exquisitely varnished wood is the reflection of the most beautifully maintained
More informationMarabu. Marapur PU. Field of Application. Characteristics
Screen Printing Ink for pre-treated polyethylene (PE) and polypropylene (PP), thermosetting plastics, metals, and topcoated surfaces High gloss, high opacity, fast drying twocomponent ink, resistant to
More informationBasic Wood Radio Cabinet Refinishing Part One. By Eric Stenberg
Basic Wood Radio Cabinet Refinishing Part One By Eric Stenberg A great thing about a hobby involving antique radios is the many aspects that can hold your interest. To people on the outside we may be just
More informationMarabu. Ultragraph UVSP. Field of application. Characteristics
UV-curable screen printing ink for rigid PVC, polystyrene, polycarbonate, PETG, paper, and card-board High gloss, very fast curing, press-ready, excellent detail printing, high chemical resistance Vers.
More informationAquaCLAD Water-Reducible Rust Preventative Alkyd
AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High
More informationCLONE ANY PART QUICKLY WITH
CLONE ANY PART QUICKLY WITH QUICK-SETTING COMPOUND MAKES ACCURATE HARD PLASTIC REPRODUCTIONS IN 6 TO 8 MINUTES A proven self-curing proofing compound for checking Surface Finish Angles & Radii Die Cavities
More informationCARBORUNDUM MEZZOTYPE dark field & reductive techniques
CARBORUNDUM MEZZOTYPE dark field & reductive techniques with Akua Carborundum Gel, a platemaking medium July 2017 AKUA CARBORUNDUM GEL The Akua Carborundum Gel for platemaking is used to create collagraph
More informationFirework Colors. 5 g each of the following compounds (in finely powdered form):
Firework Colors Topic Using the flame test to identify different metals Introduction Scientists use the flame test to distinguish between compounds containing different metal ions, such as sodium in sodium
More informationCatalog October Speedi-Sleeve The quickest and most economical way to repair worn shafts
Catalog 457027 October 2005 Speedi-Sleeve The quickest and most economical way to repair worn shafts Table of Contents The Speedi-Sleeve concept...3 SPEEDI-SLEEVE, the quickest and most sensible way to
More informationADDITIVES FOR PAD PRINTING
ADDITIVES FOR PAD PRINTING Due to the diversity of the pad printing process it is impossible to deliver such inks in ready-to-print adjustments. Therefore use of various additives to adjust the pad printing
More informationPURBOND HB S049. Single-component polyurethane adhesive for the manufacture of engineered wood products. 4 minutes. 10 minutes
PURBOND HB S049 Single-component polyurethane adhesive for the manufacture of engineered wood products PURBOND HB S049_E Purbond Technik / 06-2013 Properties PURBOND HB S049 is a liquid single-component
More informationmiramondo Technical Informations 1/7 La Strada
1/7 La Strada Technical Informations public design GmbH - Hanuschgasse 1 Objekt 31-2540 Bad Vöslau - Austria - office@.com - www..com La Strada 2/7 Dimensions 563 650 1300 1950 830 610 563 650 1300 1950
More informationRepairs. Chapter 10 Repairs 10. 1
10 Repairs Chapter 10 Repairs 10. 1 Repairs As an installer, you will probably be called upon to repair damage to a resilient floor. Here are some of the most common problems and the recommended repairs
More informationColored pencil information, basics along with techniques and blending types. Colored Pencils (wax or oil based) Boxed sets of colored pencils are
Colored pencil information, basics along with techniques and blending types. Colored Pencils (wax or oil based) Boxed sets of colored pencils are convenient but buying colors individually gives you control
More informationThis section describes those structural components which make up the main frame including bulkheads, spar cover, and roll cage.
CIRRUS AIRPLANE MAINTENANCE MANUAL Main Frame CHAPTER 53-10: MAIN FRAME GENERAL 53-10: MAIN FRAME 1. General This section describes those structural components which make up the main frame including bulkheads,
More informationTECHNICAL INFORMATION Küsnacht, February 2004 (rev. 1/09) THICKFILM STENCILS FOTECOAT 1845 SOLO
Fotec AG Eigenheimstr. 22 CH-8700 Küsnacht P.O.Box 1123 Switzerland Phone: +41 44 913 30 00 Fax: +41 44 910 45 25 e-mail: info@fotec.ch www.fotec.ch TECHNICAL INFORMATION Küsnacht, February 2004 (rev.
More informationTurning Acrylic Boxes
Preparing the Molds/Mixing the Resin/Unmolding the Blanks Turning Acrylic Boxes Preparing the Molds 1. Prepare the Molds Use 2 PVC or ABS Pipe cut into 2 ½ sections. Flatten saw-marks off the bottom on
More informationReplacing a Pearl Eye in the Frog: An Improved Method Using Hydrochloric Acid David Hawthorne
Replacing a Pearl Eye in the Frog: An Improved Method Using Hydrochloric Acid David Hawthorne The technique described in this article involves the use of hydrochloric acid to carefully dissolve the excess
More informationILFORDINFO HOW TO PROCESS YOUR FIRST BLACK AND WHITE FILM
ILFORDINFO HOW TO PROCESS YOUR FIRST BLACK AND WHITE FILM Your darkroom (kitchen, bathroom or cupboard) needs to be completely blacked out to stop light from entering. For windows use thick card cut to
More informationAESOP 3D Imaging Workshop Educational 3D Models
AESOP 3D Imaging Workshop Educational 3D Models Dennis Kriel Dennis Kriel from 3D makerspace http://www.up.ac.za/en/news/post_2062883-south-africas-first-librarymakerspace-opens-at-the-university-of-pretoria
More informationLESSON 9 PRINTING WITH STENCILS STRUCTURE 9.0 OBJECTIVES 9.1 INTRODUCTION 9.2 PRINTING WITH STENCILS 9.3 NEW IDEAS FOR PRINTING
LESSON 9 PRINTING WITH STENCILS STRUCTURE 9.0 OBJECTIVES 9.1 INTRODUCTION 9.2 PRINTING WITH STENCILS 9.2.1 PRINTING BY DABBING 9.2.2 PRINTING WITH PAINTING BRUSH 9.2.3 SPRAY PRINTING WITH STENCIL 9.3 NEW
More informationEli-Glow Photo Luminescent Products. Keep your world up all night
DAYLIGHT DARKNESS Eli-Glow Photo Luminescent Products Keep your world up all night Eli-Glow Photo Luminescent pigments are the latest achievement in sustainable eco lighting technology. This cutting edge
More informationGlassCast Penny Floor Project Page 1
GlassCast Penny Floor Project Page 1 How to lay and resin coat a Penny Floor Contents Introduction 3 Before You Begin 3 Gathering and Preparing the Pennies 3 Tools, Materials & Conditions 4 Epoxy Resin
More information