Hoda ElMaraghy Sample List of Publications

Size: px
Start display at page:

Download "Hoda ElMaraghy Sample List of Publications"

Transcription

1 1 Book Publication: The outcome of several of Dr. ElMaraghy s research activities that were carried out as part of the CRC program was documented as a basis for a new reference book on Changeable and Reconfigurable Manufacturing Systems. Professor ElMaraghy is both a major Contributing Author (9 chapters out of 22) as well as the Editor of this book published by Springer-Verlag. This book discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. It presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. This book is a comprehensive reference for professional engineers, and academics in manufacturing, industrial and mechanical engineering. ( 2 Recent Books Edited: ElMaraghy, H.A. (Editor & Contributor), 2008, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: ElMaraghy, H.A., ElMaraghy, W.H., (Editors & Contributors), 2006, Advances in Design, Springer-Verlag Publishers, ISBN: , 595 pages, 264 illustrations 3 Recent Contributions to Books: ElMaraghy, H., Wiendahl, H.P., 2008, Changeability An Introduction, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , pp ElMaraghy, H., 2008, Changing and Evolving Products and Systems Models and Enablers, , pp Ismail, M., ElMaraghy, H., 2008, Component Oriented Design of Change Ready MPC System, , pp Deif, A., ElMaraghy, H., 2008, Dynamic Capacity Planning and Modeling its Complexity, , pp Kuzgunkaya, O., ElMaraghy, H., 2008, Economic and Strategic Justification of Changeable, Reconfigurable and Flexible Manufacturing, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , pp ElMaraghy, H.A., Reconfigurable Process Plans for Responsive Manufacturing Systems, 2007, Digital Enterprise Technology: Perspectives & Future Challenges, Editors: P.F. Cunha and P.G. Maropoulos, Springer Science, ISBN: , pp Azab, A., Perusi, G., ElMaraghy, H. and Urbanic, J., Semi-Generative Macro-Process Planning for Reconfigurable Manufacturing, 2007, Digital Enterprise Technology: Perspectives & Future Page 1 of 5

2 Challenges, P.F. Cunha and P.G. Maropoulos (Editors), Springer Science, ISBN: , pp Barari, A., ElMaraghy, H.A., Knopf, G.K., 2007, Evaluation of Geometric Deviations in Sculptured Surfaces Using Probability Density Estimation, Models for Computer Aided Tolerancing in Design and Manufacturing, J.K. Davidson (Ed.), Springer-Verlag Publishers, pp , ISBN-10: Barari, Ahmed, ElMaraghy, Hoda, A., 2006, Manufacturing Driven Design of Sculptured Surfaces, In Advances in Design, ElMaraghy, H.A., ElMaraghy, W.H., Co-Editors, Springer- Verlag, pp Recent Keynote Papers: ElMaraghy, H.A., 2008, Manufacturing In High Cost Countries, Invited Keynote Paper, Center for Research-based Innovation Norway Manufacturing Program (SFI/NORMAN) International Workshop on Responsive Manufacturing, and Panelist on: Customized, Reconfigurable, Adaptive and Robust Manufacturing Processes, 3 & 4 November 2008, Trondheim, Norway. Wiendahl, H.-P., ElMaraghy, H.A., Nyhuis, P., Zäh, M., Wiendahl, H.-H., Duffie, N., Kolakowski, M., 2007, Changeable Manufacturing: Classification, Design, Operation, Keynote Paper, presented at the CIRP General Assembly held in Dresden, Germany, August ElMaraghy, H.A., 2006, Reconfigurable Process Plans for Responsive Manufacturing Systems, Keynote Paper, Proceedings of the CIRP International Design Enterprise Technology (DET) Conference, Setubal, Portugal, September Recent Full Papers in REFEREED JOURNALS: Barari, A., ElMaraghy, H.A., Orban, P., 2008, NURBS Representation of Estimated Surfaces Resulting from Machining Errors, Int. J. of Computer Integrated Manufacturing (IJCIM), Paper No.: TCIM-2007-IJCIM-0116.R2, In Press. ElMaraghy, H.A., Mahmoudi, N., 2008, Concurrent Design of Product Modules Structure and Global Supply Chain Configuration, International Journal of Computer Integrated Manufacturing (IJCIM), Paper Number: TCIM-2007-IJCIM-0139.R1, In Press. Mohib, A., Azab, A., ElMaraghy, H., 2008, Feature-based Hybrid Inspection Planning: A Mathematical Programming Approach, Int. J. of Computer Integrated Manufacturing (IJCIM) Sp. Issue: Integrated Products / Processes and Systems in Changeable Manufacturing, In Press. Youssef, A.M.A., ElMaraghy, H.A., 2008, Performance Analysis of Manufacturing Systems Composed of Modular Machines Using Universal Generating Function, J. of Manufacturing Systems (JMS) Sp. Issue on Logistics and Planning for Manufacturing Systems, Vol. 27, No. 1, In Press. ElMaraghy H., AlGeddawy, T., Azab, A., 2008, Modelling Evolution in Manufacturing: A Biological Analogy, CIRP Annals -Manufacturing Technology, Vol. 57/1, pp ElMaraghy, W.H., Nada, O.A., ElMaraghy, H.A., 2008, Quality Prediction for Reconfigurable Manufacturing Systems via Human Error Modelling, International Journal of Computer Integrated Manufacturing (IJCIM), Vol. 21, No. 5, pp Shabaka, A.I., ElMaraghy, H.A., 2008, A Model for Generating Optimal Process Plans in RMS, International Journal of Computer Integrated Manufacturing (IJCIM), Vol. 21, No. 2, pp Page 2 of 5

3 ElMaraghy, H.A., Manns, M., 2008, Synchronization of Inter-arrival Times in Manufacturing Systems with Main- and Side-Loops, International Journal of Production Research (IJPR), Published Online: DOI: / , pp Azab, A., ElMaraghy, H., 2007b, Sequential Process Planning: A Hybrid Optimal Macro-Level Approach, Journal of Manufacturing Systems (JMS) Special Issue on Design, Planning, and Control for Reconfigurable Manufacturing Systems, Vol. 26, No. 3, pp ElMaraghy, H.A., Manns, M., 2007, Transition of Inter-Arrival Time Patterns between Automated and Manual Configurations of Assembly Systems, Journal of Manufacturing Systems (JMS), Vol. 26, No. 1, 11 pages, DOI: /j.jmsy Youssef, A.M.A., ElMaraghy, H.A., 2007b, Availability Consideration in the Optimal Selection of Multiple-Aspect RMS Configurations, International Journal of Production Research (IJPR), Vol. 46, No. 21, pp Barari, A., ElMaraghy, H.A., Orban, P., 2007, NURBS Representation of Actual Machined Surfaces, Journal of Computing and Information Science in Engineering (JCISE), In Press. ElMaraghy, H.A., 2007, Enabling Change in Manufacturing Systems, International Journal of Flexible Manufacturing Systems (IJFMS) Special Issue on: Managing Change in Flexible and Reconfigurable Manufacturing Systems, Vol. 19/3, pp Kuzgunkaya, O., ElMaraghy, H.A., 2007, Economic and Strategic Perspectives on Investing in RMS and FMS, Int. J. of Flexible Manufacturing Systems (IJFMS) Special Issue: Managing Change in Flexible and Reconfigurable Manufacturing Systems, Vol. 19/3, pp Deif, A., ElMaraghy, H.A., 2007, Assessing Capacity Scalability Policies in RMS Using System Dynamics, Int. J. of Flexible Manufacturing Systems (IJFMS) Special Issue on: Capacity Planning in Flexible and Dynamic Manufacturing, Vol. 19/3, pp Youssef, A.M.A., ElMaraghy, H.A., 2007a, Optimal Configuration Selection for Reconfigurable Manufacturing Systems, Int. J. of Flexible Manufacturing Systems (IJFMS), Vol. 19, pp Shabaka, A.I., ElMaraghy, H.A., 2007, Generation of Machine Configurations based on Product Features, Sp. Issue, Int. J. Computer Integrated Manufacturing, Vol. 20, No. 4, pp Cao, Y., ElMaraghy, H., Azab, A., 2007, Reconfigurable Control Structure for Robots in Assembly, Journal of Intelligent and Robotic Systems (JIRS), Vol. 50, No. 4, pp Urbanic, R.J., ElMaraghy, H.A., ElMaraghy, W.H., 2007, A Reverse Engineering Methodology for Rotary Components from Point Cloud Data, International Journal of Advanced Manufacturing Technology (IJAMT), Vol. 37, No , pp Barari, A., ElMaraghy H. A., Knopf G. K., 2007, Search-Guided Sampling to Reduce Uncertainty of Minimum Deviation Zone Estimation, ASME Transaction- Journal of Computing and Information Science in Engineering (IJCISE), Vol. 7/4, pp Wiendahl, H.-P., ElMaraghy, H.A., Nyhuis, P., Zaeh, M., Wiendahl, H.-H., Duffie, N., Kolakowski, M., 2007, Changeable Manufacturing: Classification, Design, Operation, Keynote Paper, CIRP Annals, Vol. 56/2, pp Azab, A., ElMaraghy, H.A., 2007a, Mathematical Modeling for Reconfigurable Process Planning, CIRP Annals, Vol. 56/1, pp ElMaraghy, H.A., Majety, R., 2007, Integrated Supply Chain Design Using Multi-Criteria Optimization, International Journal of Manufacturing Technology (IJAMT), Vol. 37, No. 3-4, pp Nada, O.A., ElMaraghy, H.A., ElMaraghy, W.H., 2006, Quality Prediction in Manufacturing System Design, Journal of Manufacturing Systems (JMS), Vol. 25, No. 3, pp Page 3 of 5

4 Youssef, A.M.A., Mohib, A., ElMaraghy, H.A., 2006, Availability Assessment of Multi-State Manufacturing Systems Using Universal Generating Function, CIRP Annals, Vol. 55/1, pp Urbanic, R.J., ElMaraghy, H.A., ElMaraghy, W.H., 2006, An Integrated Systematic Design Recovery Framework, Special Issue of the ASME Transactions, Journal of Computing and Information Science in Engineering (JCISE) on 3D Computational Metrology and Reverse Engineering, Vol. 6 No. 4, pp Youssef, A.M.A., ElMaraghy, H.A., 2006b, Assessment of Manufacturing Systems Reconfiguration Smoothness, Int. J. of Advanced Manufacturing (IJAMT), Vol. 30, No. 1-2, pp Kuzgunkaya, O., ElMaraghy, H.A., 2006, Assessing the Structural Complexity of Manufacturing Systems Configurations, Int. J. of Flexible Manufacturing Systems, Vol. 18, No.6, pp Youssef, A.M.A., ElMaraghy, H.A., 2006a, Modeling and Optimization of Multiple-Aspect RMS Configurations Using GAs, Special Issue of Int. Journal of Production Research on: Advances In Evolutionary Computation for Design and Manufacturing Problem, Vol. 44, No. 22, pp ElMaraghy, H.A., 2005, Flexible and Reconfigurable Manufacturing Systems Paradigms, Special Issue of the Int. Journal of Flexible Manufacturing Systems (IJFMS), Vol. 17, No. 4, pp ElMaraghy, H.A., Kuzgunkaya, O., Urbanic, J., 2005, Comparison of Manufacturing System Configurations - A Complexity Approach, 55th CIRP Annals 2005, Vol. 54, No, 1, pp ElMaraghy, H.A., Barari, A., G.K. Knopf, 2004, Integrated Inspection and Machining Planning for Maximum Conformance to Design Tolerances, 54th CIRP Annals 2004: Manufacturing Technology, Vol. 53, No, 1, pp ElMekkawy, T., ElMaraghy, H.A., 2003, Real-Time Scheduling with deadlock avoidance in flexible manufacturing systems, The Int. J. of Advanced Manufacturing Technology, pp ElMaraghy, H.A. and ElMekkawy, T.Y., 2002, Deadlock-free Rescheduling in Flexible Manufacturing Systems, CIRP Annals, Vol. 51/1, pp Abdallah, I. B., ElMaraghy, H.A. and ElMekkawy, T.Y., 2002, Deadlock-free Scheduling in Flexible Manufacturing Systems using Petri-Nets, International Journal of Production Research (IJPR), pp ElKott, D., ElMaraghy, H.A. and ElMaraghy, W.H., 2002, Automatic Sampling for CMM Inspection Planning of Free Form Surfaces, Int. Journal of Production Research, pp Recent Full Papers in REFEREED CONFERENCES: AlGeddawy, T.N., ElMaraghy, H.A., 2009, Symbiotic Design of Products and Manufacturing Systems Using Biological Analysis, CIRP Int. Design Conference, Cranfield University, UK, March 2009 (In Press). Meselhy, K.T., ElMaraghy, W.H., ElMaraghy, H.A., 2009, A Periodicity Metric for Assessing Maintenance Strategies, International CIRP Conference on Industrial Product-Service Systems (IPS2), Cranfield University, UK, 1-2 April 2009 (In Press). Meselhy, K.T., ElMaraghy, W.H., ElMaraghy, H.A., 2009, A Comprehensive Complexity-based Failure Modeling for Mainainability and Serviceability, International CIRP Conference on Industrial Product-Service Systems (IPS2), Cranfield University, UK, 1-2 April 2009 (In Press). AlGeddawy, T., ElMaraghy, H.A., 2008, Assembly System Design for Delayed Product Differentiation, 2nd CIRP International Conference on Assembly Technologies and Systems (CATS), September 2008, Toronto, Canada. Page 4 of 5

5 Manns, M., Urbanic, R.J., ElMaraghy, H.A., 2008, A Coding Scheme for the Reconfigurability of Assembly System Designs 2nd CIRP International Conference on Assembly Technologies and Systems (CATS), September 2008, Toronto, Canada. Azab, A., ElMaraghy, H., 2007, A Novel QAP Mathematical Programming Formulation for Process Planning in Reconfigurable Manufacturing, 4th Int. CIRP Conf. on Digital Enterprise Technology (DET 07), Bath, United Kingdom, Sept., pp , ISBN: Mohib, A., ElMaraghy, H., 2007, Framework for Feature-based Hybrid Inspection Planning for Complex Mechanical Parts, 2nd International Conference on Changeable, Agile, Virtual and Reconfigurable Production (CARV), Toronto, Ontario, July Urbanic, J., ElMaraghy, H., ElMaraghy, W., 2007, A Machine Code to Assess Similarity and Highlight Reconfiguration Issue, 2nd International Conference on Changeable, Agile, Virtual and Reconfigurable Production (CARV), Toronto, Ontario, July ElMaraghy, H.A., Cao, Y., Azab, A., 2006, Reconfigurable Control Structure for Robots in Assembly, 1st CIRP International Seminar on Assembly Systems (ISAS) 2006, University of Stuttgart, Stuttgart, Germany, November Nada, O., ElMaraghy, H., ElMaraghy, W., 2006, Quality Prediction due to Human Performance Variation in Manufacturing and Assembly, 1st CIRP International Seminar on Assembly Systems (ISAS), University of Stuttgart, Stuttgart, Germany, November ElMaraghy, H.A., 2006b, A Complexity Code for Manufacturing Systems, 2006 ASME Int. Conference on Manufacturing Science & Engineering (MSEC), Symposium on Advances in Process & System Planning, Ypsilanti, MI, USA, 8-11 October ElMaraghy, H.A., 2006a, Reconfigurable Process Plans for Responsive Manufacturing Systems, Keynote Paper, Proceedings of the CIRP International Design Enterprise Technology (DET) Conference, Setubal, Portugal, September Mohib, A., Remy, S., ElMaraghy, H., 2006, Recognition of Geometric Primitives Using Medial Axis Transform, 16th CIRP International Design Seminar, Kananaskis, Alberta, July 16-19, Last Updated: 9 January 2009 Page 5 of 5

Dr. Hoda ElMaraghy Sample of Publications from past six (6) years

Dr. Hoda ElMaraghy Sample of Publications from past six (6) years 1 Book Publication: The outcome of several of Dr. ElMaraghy s research activities that were carried out as part of the CRC program was documented as a basis for a new reference book on Changeable and Reconfigurable

More information

Enabling Manufacturing Competitiveness and Economic Sustainability

Enabling Manufacturing Competitiveness and Economic Sustainability Enabling Manufacturing Competitiveness and Economic Sustainability Hoda A. ElMaraghy Editor Enabling Manufacturing Competitiveness and Economic Sustainability Proceedings of the 4th International Conference

More information

Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering. Opening, welcome, introduction of invited guests. Approval of the agenda

Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering. Opening, welcome, introduction of invited guests. Approval of the agenda 2005 TT Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering Meeting Opening Opening, welcome, introduction of invited guests Approval of the agenda Approval of the minutes Organized

More information

Process Planning - The Link Between Varying Products and their Manufacturing Systems p. 37

Process Planning - The Link Between Varying Products and their Manufacturing Systems p. 37 Definitions and Strategies Changeability - An Introduction p. 3 Motivation p. 3 Evolution of Factories p. 7 Deriving the Objects of Changeability p. 8 Elements of Changeable Manufacturing p. 10 Factory

More information

A COMPUTATIONAL TOOL FOR VIRTUAL PRODUCT DEVELOPMENT EXPLOITING CHANGEABILITY KNOWLEDGE

A COMPUTATIONAL TOOL FOR VIRTUAL PRODUCT DEVELOPMENT EXPLOITING CHANGEABILITY KNOWLEDGE 21 ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, 21-25 AUGUST 2017, THE UNIVERSITY OF BRITISH COLUMBIA, VANCOUVER, CANADA A COMPUTATIONAL TOOL FOR VIRTUAL PRODUCT DEVELOPMENT EXPLOITING CHANGEABILITY

More information

Knowledge Management in collaborative engineering

Knowledge Management in collaborative engineering 114 Int. J. Collaborative Engineering, Vol. 1, Nos. 1/2, 2009 Knowledge Management in collaborative engineering Waguih ElMaraghy Faculty of Engineering, Department of Industrial and Manufacturing Systems

More information

A CYBER PHYSICAL SYSTEMS APPROACH FOR ROBOTIC SYSTEMS DESIGN

A CYBER PHYSICAL SYSTEMS APPROACH FOR ROBOTIC SYSTEMS DESIGN Proceedings of the Annual Symposium of the Institute of Solid Mechanics and Session of the Commission of Acoustics, SISOM 2015 Bucharest 21-22 May A CYBER PHYSICAL SYSTEMS APPROACH FOR ROBOTIC SYSTEMS

More information

Ankur Sinha, Ph.D. Indian Institute of Technology, Kanpur, India Bachelor of Technology, Department of Mechanical Engineering, 2006

Ankur Sinha, Ph.D. Indian Institute of Technology, Kanpur, India Bachelor of Technology, Department of Mechanical Engineering, 2006 Ankur Sinha, Ph.D. Department of Information and Service Economy Aalto University School of Business Former: Helsinki School of Economics Helsinki 00100 Finland Email: Ankur.Sinha@aalto.fi EDUCATION Aalto

More information

Development of an Intelligent Agent based Manufacturing System

Development of an Intelligent Agent based Manufacturing System Development of an Intelligent Agent based Manufacturing System Hong-Seok Park 1 and Ngoc-Hien Tran 2 1 School of Mechanical and Automotive Engineering, University of Ulsan, Ulsan 680-749, South Korea 2

More information

INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001

INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001 DESIGN OF PART FAMILIES FOR RECONFIGURABLE MACHINING SYSTEMS BASED ON MANUFACTURABILITY FEEDBACK Byungwoo Lee and Kazuhiro

More information

Architectures On-Demand for Any Domain Using Stable Software Patterns

Architectures On-Demand for Any Domain Using Stable Software Patterns Architectures On-Demand for Any Domain Using Stable Software Patterns FIVE DAYS SEMINAR PROPOSAL DR. MOHAMED E. FAYAD Professor of Computer Engineering Computer Engineering Dept., College of Engineering

More information

CNR ICMATE, Padova - Italy. ENEA, Roma - Italy. Monica Fabrizio 1, Amelia Montone 2, Federico Cernuschi 3 1

CNR ICMATE, Padova - Italy. ENEA, Roma - Italy. Monica Fabrizio 1, Amelia Montone 2, Federico Cernuschi 3 1 Mission Innovation. Clean Energy Materials Innovation Challenge 6: to accelerate the exploration, discovery and use of new high performance, low-cost clean energy materials Monica Fabrizio 1, Amelia Montone

More information

A SYSTEMIC APPROACH TO KNOWLEDGE SOCIETY FORESIGHT. THE ROMANIAN CASE

A SYSTEMIC APPROACH TO KNOWLEDGE SOCIETY FORESIGHT. THE ROMANIAN CASE A SYSTEMIC APPROACH TO KNOWLEDGE SOCIETY FORESIGHT. THE ROMANIAN CASE Expert 1A Dan GROSU Executive Agency for Higher Education and Research Funding Abstract The paper presents issues related to a systemic

More information

Journal Title ISSN 5. MIS QUARTERLY BRIEFINGS IN BIOINFORMATICS

Journal Title ISSN 5. MIS QUARTERLY BRIEFINGS IN BIOINFORMATICS List of Journals with impact factors Date retrieved: 1 August 2009 Journal Title ISSN Impact Factor 5-Year Impact Factor 1. ACM SURVEYS 0360-0300 9.920 14.672 2. VLDB JOURNAL 1066-8888 6.800 9.164 3. IEEE

More information

This list supersedes the one published in the November 2002 issue of CR.

This list supersedes the one published in the November 2002 issue of CR. PERIODICALS RECEIVED This is the current list of periodicals received for review in Reviews. International standard serial numbers (ISSNs) are provided to facilitate obtaining copies of articles or subscriptions.

More information

FOREST PRODUCTS: THE SHIFT TO DIGITAL ACCELERATES

FOREST PRODUCTS: THE SHIFT TO DIGITAL ACCELERATES FOREST PRODUCTS: THE SHIFT TO DIGITAL ACCELERATES INTRODUCTION While the digital revolution has transformed many industries, its impact on forest products companies has been relatively limited, as the

More information

Service Science: A Key Driver of 21st Century Prosperity

Service Science: A Key Driver of 21st Century Prosperity Service Science: A Key Driver of 21st Century Prosperity Dr. Bill Hefley Carnegie Mellon University The Information Technology and Innovation Foundation Washington, DC April 9, 2008 Topics Why a focus

More information

The Evolution of GPS. In The Good Ole Days. The Evolution of Products. Introduction. The First Geometrical Tolerances

The Evolution of GPS. In The Good Ole Days. The Evolution of Products. Introduction. The First Geometrical Tolerances The Role of Standardization for Industrial Metrology The Evolution of GPS 1 Dr. Henrik S. Nielsen HN Metrology Consulting Chairman, ISO TC 213: Geometrical Product Specifications GPS has followed the development

More information

Intelligent Infrastructures Systems for Sustainable Urban Environment

Intelligent Infrastructures Systems for Sustainable Urban Environment ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XV, NR. 1, 2008, ISSN 1453-7397 Daniel Amariei, Gilbert Rainer Gillich, Dan Baclesanu, Theodoros Loutas, Constantinos Angelis Intelligent Infrastructures

More information

IS 525 Chapter 2. Methodology Dr. Nesrine Zemirli

IS 525 Chapter 2. Methodology Dr. Nesrine Zemirli IS 525 Chapter 2 Methodology Dr. Nesrine Zemirli Assistant Professor. IS Department CCIS / King Saud University E-mail: Web: http://fac.ksu.edu.sa/nzemirli/home Chapter Topics Fundamental concepts and

More information

Factories of the Future 2020 Roadmap. PPP Info Days 9 July 2012 Rikardo Bueno Anirban Majumdar

Factories of the Future 2020 Roadmap. PPP Info Days 9 July 2012 Rikardo Bueno Anirban Majumdar Factories of the Future 2020 Roadmap PPP Info Days 9 July 2012 Rikardo Bueno Anirban Majumdar RD&I roadmap 2014-2020 roadmap will cover R&D and innovation activities guiding principles: industry competitiveness,

More information

GUSTAVO A. SANCHEZ. Web:

GUSTAVO A. SANCHEZ.   Web: GUSTAVO A. SANCHEZ Email: gsanchez@usb.ve Web: https://ve.linkedin.com/in/drgustavosanchez PERSONAL PROFILE Consultant, lecturer and researcher in the field of Optimization and Control Systems. PhD degree

More information

2018 ASSESS Update. Analysis, Simulation and Systems Engineering Software Strategies

2018 ASSESS Update. Analysis, Simulation and Systems Engineering Software Strategies 2018 ASSESS Update Analysis, Simulation and Systems Engineering Software Strategies The ASSESS Initiative The ASSESS Initiative was formed to bring together key players to guide and influence strategies

More information

DESIGN OF AN INNOVATION PLATFORM FOR MANUFACTURING SMES

DESIGN OF AN INNOVATION PLATFORM FOR MANUFACTURING SMES Proceedings of the 11 th International Conference on Manufacturing Research (ICMR2013) DESIGN OF AN INNOVATION PLATFORM FOR MANUFACTURING SMES Martin Ziarati Centre for Factories of the Future Design Hub

More information

Available online at ScienceDirect. Procedia CIRP 43 (2016 ) th CIRP Conference on Computer Aided Tolerancing (CAT)

Available online at  ScienceDirect. Procedia CIRP 43 (2016 ) th CIRP Conference on Computer Aided Tolerancing (CAT) Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 43 (2016 ) 94 99 14th CIRP Conference on Computer Aided Tolerancing (CAT) Variation Analysis considering manual assembly complexity

More information

The Need for Reconfigurable Robotic Systems

The Need for Reconfigurable Robotic Systems CARV 2007 The Need for Reconfigurable Robotic Systems M. Hedelind 1, M. Jackson 2 Abstract: Change and uncertainty dominate today s business environment. The competition is growing harder as the markets

More information

THE NEW GENERATION OF MANUFACTURING SYSTEMS

THE NEW GENERATION OF MANUFACTURING SYSTEMS THE NEW GENERATION OF MANUFACTURING SYSTEMS Ing. Andrea Lešková, PhD. Technical University in Košice, Faculty of Mechanical Engineering, Mäsiarska 74, 040 01 Košice e-mail: andrea.leskova@tuke.sk Abstract

More information

Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing

Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing Paper ID #5813 Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing Dr. Cheng Y. Lin P.E., Old Dominion University Dr. Lin is

More information

UNIT-III LIFE-CYCLE PHASES

UNIT-III LIFE-CYCLE PHASES INTRODUCTION: UNIT-III LIFE-CYCLE PHASES - If there is a well defined separation between research and development activities and production activities then the software is said to be in successful development

More information

TOWARDS AUTOMATED CAPTURING OF CMM INSPECTION STRATEGIES

TOWARDS AUTOMATED CAPTURING OF CMM INSPECTION STRATEGIES Bulletin of the Transilvania University of Braşov Vol. 9 (58) No. 2 - Special Issue - 2016 Series I: Engineering Sciences TOWARDS AUTOMATED CAPTURING OF CMM INSPECTION STRATEGIES D. ANAGNOSTAKIS 1 J. RITCHIE

More information

Industry 4.0: the new challenge for the Italian textile machinery industry

Industry 4.0: the new challenge for the Italian textile machinery industry Industry 4.0: the new challenge for the Italian textile machinery industry Executive Summary June 2017 by Contacts: Economics & Press Office Ph: +39 02 4693611 email: economics-press@acimit.it ACIMIT has

More information

Advanced Dimensional Management LLC

Advanced Dimensional Management LLC Index: Mechanical Tolerance Stackup and Analysis Bryan R. Fischer Accuracy and precision 8-9 Advanced Dimensional Management 14, 21, 78, 118, 208, 251, 286, 329-366 Ambiguity 4, 8-14 ASME B89 48 ASME Y14.5M-1994

More information

Cyber-Physical Production Systems. Professor Svetan Ratchev University of Nottingham

Cyber-Physical Production Systems. Professor Svetan Ratchev University of Nottingham Cyber-Physical Production Systems Professor Svetan Ratchev University of Nottingham Contents 1. Introduction 3 2. Key definitions 4 2.1 Cyber-Physical systems 4 2.2 Cyber-Physical Production Systems 4

More information

Farnborough Airshow Farnborough Air Show Investor Relations Technology Seminar 2018 Rolls-Royce

Farnborough Airshow Farnborough Air Show Investor Relations Technology Seminar 2018 Rolls-Royce 2018 Farnborough Airshow Paul Stein Chief Technology Officer Pioneering the power that matters 19,400 engineers across the business Global presence in 50 countries Support a Global network 31 University

More information

NAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015

NAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 NAVAIR Non Contact In-Process Inspection Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 Overview Background on Navy 3D Model Status (3MS / MBD) Proposed System Examples Definition of Digital Product

More information

Front Digital page Strategy and Leadership

Front Digital page Strategy and Leadership Front Digital page Strategy and Leadership Who am I? Prof. Dr. Bob de Wit What concerns me? - How to best lead a firm - How to design the strategy process - How to best govern a country - How to adapt

More information

Modeling Manufacturing Systems. From Aggregate Planning to Real-Time Control

Modeling Manufacturing Systems. From Aggregate Planning to Real-Time Control Modeling Manufacturing Systems From Aggregate Planning to Real-Time Control Springer-Verlag Berlin Heidelberg GmbH Paolo Brandimarte. Agostino Villa (Eds.) Modeling Manufacturing Systems From Aggregate

More information

Introduction. Requirements Engineering: Why RE? What is RE? How to do RE? -> RE Processes. Why RE in SysE? Case Studies and The Standish Report

Introduction. Requirements Engineering: Why RE? What is RE? How to do RE? -> RE Processes. Why RE in SysE? Case Studies and The Standish Report Requirements Engineering: Why RE? Introduction Why RE in SysE? Software Lifecycle and Error Propagation Case Studies and The Standish Report What is RE? Role of Requirements How to do RE? -> RE Processes

More information

Introduction to Design Science Methodology

Introduction to Design Science Methodology Introduction to Design Science Methodology Roel Wieringa Slides based on the book Design Science Methodology for Information Systems and Software Engineering, Springer 2014 1 Design science Design science

More information

Agent-Based Modeling Tools for Electric Power Market Design

Agent-Based Modeling Tools for Electric Power Market Design Agent-Based Modeling Tools for Electric Power Market Design Implications for Macro/Financial Policy? Leigh Tesfatsion Professor of Economics, Mathematics, and Electrical & Computer Engineering Iowa State

More information

UNIVERSITY OF REGINA FACULTY OF ENGINEERING. TIME TABLE: Once every two weeks (tentatively), every other Friday from pm

UNIVERSITY OF REGINA FACULTY OF ENGINEERING. TIME TABLE: Once every two weeks (tentatively), every other Friday from pm 1 UNIVERSITY OF REGINA FACULTY OF ENGINEERING COURSE NO: ENIN 880AL - 030 - Fall 2002 COURSE TITLE: Introduction to Intelligent Robotics CREDIT HOURS: 3 INSTRUCTOR: Dr. Rene V. Mayorga ED 427; Tel: 585-4726,

More information

Manufacturing Industry Innovation CRC. Industry Engagement Workshop

Manufacturing Industry Innovation CRC. Industry Engagement Workshop Manufacturing Industry Innovation CRC Industry Engagement Workshop How and why Welcome and introduction Then Industry and Innovation Minister requested AiG to design a CRC to provide strategic research

More information

Pervasive Services Engineering for SOAs

Pervasive Services Engineering for SOAs Pervasive Services Engineering for SOAs Dhaminda Abeywickrama (supervised by Sita Ramakrishnan) Clayton School of Information Technology, Monash University, Australia dhaminda.abeywickrama@infotech.monash.edu.au

More information

Digital Twin: Manufacturing Excellence through Virtual Factory Replication

Digital Twin: Manufacturing Excellence through Virtual Factory Replication Digital Twin: Manufacturing Excellence through Virtual Factory Replication This paper introduces the concept of a Digital Twin as a virtual representation of what has been produced. Compare a Digital Twin

More information

Ryan G. Rosandich, Ph.D.

Ryan G. Rosandich, Ph.D. Education: May 1994 Dec. 1992 Aug. 1980 June 1978 Ph.D. Engineering Management, University of Missouri-Rolla, Rolla, MO. Emphasis in intelligent manufacturing, neural networks, and machine vision. (GPA:

More information

VIRTUAL FACTORY FRAMEWORK: KEY ENABLER FOR FUTURE MANUFACTURING

VIRTUAL FACTORY FRAMEWORK: KEY ENABLER FOR FUTURE MANUFACTURING VIRTUAL FACTORY FRAMEWORK: KEY ENABLER FOR FUTURE MANUFACTURING P.Pedrazzoli; M.Sacco; A.Jönsson; C.R.Boër TTS srl - pedrazzoli@ttsnetwork.com; ITIA-CNR - marco.sacco@itia.cnr.it; ETHZ - joensson@imes.mavt.ethz.ch;

More information

Proposed Curriculum Master of Science in Systems Engineering for The MITRE Corporation

Proposed Curriculum Master of Science in Systems Engineering for The MITRE Corporation Proposed Curriculum Master of Science in Systems Engineering for The MITRE Corporation Core Requirements: (9 Credits) SYS 501 Concepts of Systems Engineering SYS 510 Systems Architecture and Design SYS

More information

University of Bristol - Explore Bristol Research

University of Bristol - Explore Bristol Research Mahmoud, H., Dhokia, V., & Nassehi, A. (2016). STEP-based Conceptual Framework for Measurement Planning Integration. Procedia CIRP, 43, 315-320. DOI: 10.1016/j.procir.2016.02.037 Publisher's PDF, also

More information

2. Simulated Based Evolutionary Heuristic Methodology

2. Simulated Based Evolutionary Heuristic Methodology XXVII SIM - South Symposium on Microelectronics 1 Simulation-Based Evolutionary Heuristic to Sizing Analog Integrated Circuits Lucas Compassi Severo, Alessandro Girardi {lucassevero, alessandro.girardi}@unipampa.edu.br

More information

SPICE: IS A CAPABILITY MATURITY MODEL APPLICABLE IN THE CONSTRUCTION INDUSTRY? Spice: A mature model

SPICE: IS A CAPABILITY MATURITY MODEL APPLICABLE IN THE CONSTRUCTION INDUSTRY? Spice: A mature model SPICE: IS A CAPABILITY MATURITY MODEL APPLICABLE IN THE CONSTRUCTION INDUSTRY? Spice: A mature model M. SARSHAR, M. FINNEMORE, R.HAIGH, J.GOULDING Department of Surveying, University of Salford, Salford,

More information

Human-robotic cooperation In the light of Industry 4.0

Human-robotic cooperation In the light of Industry 4.0 Human-robotic cooperation In the light of Industry 4.0 Central European cooperation for Industry 4.0 workshop Dr. Erdős Ferenc Gábor Engineering and Management Intelligence Laboratoty (EMI) Institute for

More information

INTELLIGENT SYSTEMS ARCHITECTURE DESIGN

INTELLIGENT SYSTEMS ARCHITECTURE DESIGN page 1 / 5 page 2 / 5 intelligent systems architecture design pdf A system architecture or systems architecture is the conceptual model that defines the structure, behavior, and more views of a system.

More information

Co-evolution of agent-oriented conceptual models and CASO agent programs

Co-evolution of agent-oriented conceptual models and CASO agent programs University of Wollongong Research Online Faculty of Informatics - Papers (Archive) Faculty of Engineering and Information Sciences 2006 Co-evolution of agent-oriented conceptual models and CASO agent programs

More information

Intelligent Advisory System for Designing Plastics Products

Intelligent Advisory System for Designing Plastics Products Intelligent Advisory System for Designing Plastics Products U. Sancin 1 and B. Dolšak 2 Abstract Plastics product design is very experience dependent process. In spite of various computer tools available

More information

Driving Cost Reductions in Offshore Wind THE LEANWIND PROJECT FINAL PUBLICATION

Driving Cost Reductions in Offshore Wind THE LEANWIND PROJECT FINAL PUBLICATION Driving Cost Reductions in Offshore Wind THE LEANWIND PROJECT FINAL PUBLICATION This project has received funding from the European Union s Co-funded by the Intelligent Energy Europe Seventh Programme

More information

Effect of deposition speed on the flatness and cylindricity of parts produced by three dimensional printing process

Effect of deposition speed on the flatness and cylindricity of parts produced by three dimensional printing process Journal of Physics: Conference Series PAPER OPEN ACCESS Effect of deposition speed on the flatness and cylindricity of parts produced by three dimensional printing process To cite this article: Muhammad

More information

Awarded as Best Faculty in Year 2009 and honored by the Chairman Board of Governor, the then Honorable Chief Minister of Uttarakhand.

Awarded as Best Faculty in Year 2009 and honored by the Chairman Board of Governor, the then Honorable Chief Minister of Uttarakhand. Gupta A. Ashutosh Gupta Associate Professor Mechanical Engineering Department, G. B. Pant Engineering College, Ghurdauri, Pauri-Garhwal Pauri (Uttarakhand)-246194 E-mail: ashuaec72@yahoo.com Areas Of Interest

More information

Digitalization in Aker BP

Digitalization in Aker BP Digitalization in Aker BP Subsea Operations Conference 09.08.2018 Camilla Leon, Aker BP DIGITALIZATION IN AKER BP Solid footprint covering entire NCS Skarv (operator) Solid base performance and upside

More information

Virtual Reality: Basic Concept

Virtual Reality: Basic Concept Virtual Reality: Basic Concept INTERACTION VR IMMERSION VISUALISATION NAVIGATION Virtual Reality is about creating substitutes of real-world objects, events or environments that are acceptable to humans

More information

From Model-Based Strategies to Intelligent Control Systems

From Model-Based Strategies to Intelligent Control Systems From Model-Based Strategies to Intelligent Control Systems IOAN DUMITRACHE Department of Automatic Control and Systems Engineering Politehnica University of Bucharest 313 Splaiul Independentei, Bucharest

More information

Development of a modular and reconfigurable manufacturing system - method and industry case

Development of a modular and reconfigurable manufacturing system - method and industry case THE 4 th STUDENT SYMPOSIUM ON MECHANICAL AND MANUFACTURING ENGINEERING Development of a modular and reconfigurable manufacturing system - method and industry case B. Martinez Bort, C. Meldgaard Thomsen,

More information

Chapter One : Previous studies

Chapter One : Previous studies Summary The industrial design approaches in the concurrent design concept framework The research deals with the industrial design approaches in the concurrent design concept framework, where the concurrent

More information

Symposium on Plasma And Nuclear Systems

Symposium on Plasma And Nuclear Systems Symposium on Plasma And Nuclear Systems SPANS-2018 Notice: 16-Aug-2018 Room: UA1240 UOIT Oshawa, ON, Canada Sponsors: IEEE-Toronto, NPSS Chapter, CNS UOIT Chapter, CNS Fusion Science and Technology Division,

More information

An Expert System Approach for Selecting a Multitasking CNC Machining Center

An Expert System Approach for Selecting a Multitasking CNC Machining Center VOLUME 33, NUMBER 4 September 2017 Article Page 2 References Page 12 An Expert System Approach for Selecting a Multitasking CNC Machining Center Author Dr. Manocher Djassemi Professor of Industrial Technology

More information

Framework Programme 7

Framework Programme 7 Framework Programme 7 1 Joining the EU programmes as a Belarusian 1. Introduction to the Framework Programme 7 2. Focus on evaluation issues + exercise 3. Strategies for Belarusian organisations + exercise

More information

Despite the euphonic name, the words in the program title actually do describe what we're trying to do:

Despite the euphonic name, the words in the program title actually do describe what we're trying to do: I've been told that DASADA is a town in the home state of Mahatma Gandhi. This seems a fitting name for the program, since today's military missions that include both peacekeeping and war fighting. Despite

More information

Robot Task-Level Programming Language and Simulation

Robot Task-Level Programming Language and Simulation Robot Task-Level Programming Language and Simulation M. Samaka Abstract This paper presents the development of a software application for Off-line robot task programming and simulation. Such application

More information

A Divide-and-Conquer Approach to Evolvable Hardware

A Divide-and-Conquer Approach to Evolvable Hardware A Divide-and-Conquer Approach to Evolvable Hardware Jim Torresen Department of Informatics, University of Oslo, PO Box 1080 Blindern N-0316 Oslo, Norway E-mail: jimtoer@idi.ntnu.no Abstract. Evolvable

More information

NEW STANDARDS IN THE FIELD OF GEOMETRICAL PRODUCT SPECIFICATIONS

NEW STANDARDS IN THE FIELD OF GEOMETRICAL PRODUCT SPECIFICATIONS NEW STANDARDS IN THE FIELD OF GEOMETRICAL PRODUCT SPECIFICATIONS Pavlina TOTEVA, Dimka VASILEVA and Nadezhda MIHAYLOVA ABSTRACT: The essential tool for improving product quality and reducing manufacturing

More information

Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering

Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering Agenda ABOUT - Working Group opening - Prof. Tullio Tolio Connections to other CIRP initiatives - Prof. Laszlo Monostori, Prof.

More information

Introduction to Design Science Methodology

Introduction to Design Science Methodology Introduction to Design Science Methodology Roel Wieringa Slides based on the book Design Science Methodology for Information Systems and Software Engineering, Springer 2014 1 Design science Design science

More information

Department of Mechanical Engineering

Department of Mechanical Engineering Velammal Engineering College Department of Mechanical Engineering Name & Photo : Dr. G. Prabhakaran Designation: Qualification : Professor & Head M.E., Ph.D Area of Specialization :, Production & Optimization

More information

Using Reactive Deliberation for Real-Time Control of Soccer-Playing Robots

Using Reactive Deliberation for Real-Time Control of Soccer-Playing Robots Using Reactive Deliberation for Real-Time Control of Soccer-Playing Robots Yu Zhang and Alan K. Mackworth Department of Computer Science, University of British Columbia, Vancouver B.C. V6T 1Z4, Canada,

More information

Deep learning for INTELLIGENT machines

Deep learning for INTELLIGENT machines Deep learning for INTELLIGENT machines GAMING DESIGN ENTERPRISE VIRTUALIZATION HPC & CLOUD SERVICE PROVIDERS INTELLIGENT MACHINES THE WORLD LEADER IN VISUAL COMPUTING 2 3 APPLICATIONS OF DEEP LEARNING

More information

Design of an Intelligent Pressure Control System Based on the Fuzzy Self-tuning PID Controller

Design of an Intelligent Pressure Control System Based on the Fuzzy Self-tuning PID Controller Design of an Intelligent Pressure Control System Based on the Fuzzy Self-tuning PID Controller 1 Deepa S. Bhandare, 2 N. R.Kulkarni 1,2 Department of Electrical Engineering, Modern College of Engineering,

More information

Component Based Mechatronics Modelling Methodology

Component Based Mechatronics Modelling Methodology Component Based Mechatronics Modelling Methodology R.Sell, M.Tamre Department of Mechatronics, Tallinn Technical University, Tallinn, Estonia ABSTRACT There is long history of developing modelling systems

More information

Towards the definition of a Science Base for Enterprise Interoperability: A European Perspective

Towards the definition of a Science Base for Enterprise Interoperability: A European Perspective Towards the definition of a Science Base for Enterprise Interoperability: A European Perspective Keith Popplewell Future Manufacturing Applied Research Centre, Coventry University Coventry, CV1 5FB, United

More information

Europass curriculum vitae. Academic Profile. Personal information. Education. Work Experience

Europass curriculum vitae. Academic Profile. Personal information. Education. Work Experience Europass curriculum vitae Academic Profile Personal information Surname / First name Omirou Sotiris Telephones (+357) 22345158 ext 131 Fax (+357) 22438234 E-mail eng.os@fit.ac.cy Website http://staff.fit.ac.cy/eng.os

More information

Co-evolution for Communication: An EHW Approach

Co-evolution for Communication: An EHW Approach Journal of Universal Computer Science, vol. 13, no. 9 (2007), 1300-1308 submitted: 12/6/06, accepted: 24/10/06, appeared: 28/9/07 J.UCS Co-evolution for Communication: An EHW Approach Yasser Baleghi Damavandi,

More information

PPP InfoDay Brussels, July 2012

PPP InfoDay Brussels, July 2012 PPP InfoDay Brussels, 09-10 July 2012 The Factories of the Future Calls in ICT WP2013. Objectives 7.1 and 7.2 DG CONNECT Scientific Officers: Rolf Riemenschneider, Mariusz Baldyga, Christoph Helmrath,

More information

ScienceDirect. Optimization of Fuzzy Controller Parameters for the Temperature Control of Superheated Steam

ScienceDirect. Optimization of Fuzzy Controller Parameters for the Temperature Control of Superheated Steam Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 100 (015 ) 1547 1555 5th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 014 Optimization of

More information

Assessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit April 2018.

Assessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit April 2018. Assessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit 25-27 April 2018 Assessment Report 1. Scientific ambition, quality and impact Rating: 3.5 The

More information

AI MAGAZINE AMER ASSOC ARTIFICIAL INTELL UNITED STATES English ANNALS OF MATHEMATICS AND ARTIFICIAL

AI MAGAZINE AMER ASSOC ARTIFICIAL INTELL UNITED STATES English ANNALS OF MATHEMATICS AND ARTIFICIAL Title Publisher ISSN Country Language ACM Transactions on Autonomous and Adaptive Systems ASSOC COMPUTING MACHINERY 1556-4665 UNITED STATES English ACM Transactions on Intelligent Systems and Technology

More information

Technology Evaluation. David A. Berg Queen s University Kingston, ON November 28, 2017

Technology Evaluation. David A. Berg Queen s University Kingston, ON November 28, 2017 Technology Evaluation David A. Berg Queen s University Kingston, ON November 28, 2017 About me Born and raised in Alberta Queen s alumni (as well as University of Calgary & Western) Recently retired from

More information

MANUFACTURING SIMULATION: COMPUTER AIDED TOLERANCING FOR PROCESS PLANNING

MANUFACTURING SIMULATION: COMPUTER AIDED TOLERANCING FOR PROCESS PLANNING ISSN 1726-4529 Int. j. simul. model. 5 (2006) 1, 5-15 Professional paper MANUFACTURING SIMULATION: COMPUTER AIDED TOLERANCING FOR PROCESS PLANNING Bouaziz, Z. * & Masmoudi, F. ** * Unit of Mechanics, Solids,

More information

Information Systems Frontiers CALL FOR PAPERS. Special Issue on: Digital transformation for a sustainable society in the 21st century

Information Systems Frontiers CALL FOR PAPERS. Special Issue on: Digital transformation for a sustainable society in the 21st century Information Systems Frontiers CALL FOR PAPERS Special Issue on: Digital transformation for a sustainable society in the 21st century The digitalization process and its outcomes in the 21 st century accelerate

More information

Vector Based Datum Transformation Scheme for Computer Aided Measurement

Vector Based Datum Transformation Scheme for Computer Aided Measurement 289 Vector Based Datum Transformation Scheme for Computer Aided Measurement Danny K. L. Lai 1 and Matthew. M. F. Yuen 2 1 The Hong Kong University of Science and Technology, dannylai@ust.hk 2 The Hong

More information

Software-Intensive Systems Producibility

Software-Intensive Systems Producibility Pittsburgh, PA 15213-3890 Software-Intensive Systems Producibility Grady Campbell Sponsored by the U.S. Department of Defense 2006 by Carnegie Mellon University SSTC 2006. - page 1 Producibility

More information

Automating Redesign of Electro-Mechanical Assemblies

Automating Redesign of Electro-Mechanical Assemblies Automating Redesign of Electro-Mechanical Assemblies William C. Regli Computer Science Department and James Hendler Computer Science Department, Institute for Advanced Computer Studies and Dana S. Nau

More information

TECHNOLOGY VISION 2017 IN 60 SECONDS

TECHNOLOGY VISION 2017 IN 60 SECONDS TECHNOLOGY VISION 2017 IN 60 SECONDS GET THE ESSENTIALS THE BIG READ SHORT ON TIME? VIEW HIGHLIGHTS 5 MIN READ VIEW FULL REPORT 45 MIN READ VIEW SHORT REPORT 15 MIN READ OVERVIEW #TECHV1SION2017 2017 TREND

More information

SMART MANUFACTURING: A Competitive Necessity. SMART MANUFACTURING INDUSTRY REPORT Vol 1 No 1.

SMART MANUFACTURING: A Competitive Necessity. SMART MANUFACTURING INDUSTRY REPORT Vol 1 No 1. SMART MANUFACTURING: A Competitive Necessity SMART MANUFACTURING INDUSTRY REPORT Vol 1 No 1. Get Smart Three years ago the world was introduced to Amazon Echo, and its now popular intelligent personal

More information

NCCT IEEE PROJECTS ADVANCED ROBOTICS SOLUTIONS. Latest Projects, in various Domains. Promise for the Best Projects

NCCT IEEE PROJECTS ADVANCED ROBOTICS SOLUTIONS. Latest Projects, in various Domains. Promise for the Best Projects NCCT Promise for the Best Projects IEEE PROJECTS in various Domains Latest Projects, 2009-2010 ADVANCED ROBOTICS SOLUTIONS EMBEDDED SYSTEM PROJECTS Microcontrollers VLSI DSP Matlab Robotics ADVANCED ROBOTICS

More information

An Energy Efficient Multi-Target Tracking in Wireless Sensor Networks Based on Polygon Tracking Method

An Energy Efficient Multi-Target Tracking in Wireless Sensor Networks Based on Polygon Tracking Method International Journal of Emerging Trends in Science and Technology DOI: http://dx.doi.org/10.18535/ijetst/v2i8.03 An Energy Efficient Multi-Target Tracking in Wireless Sensor Networks Based on Polygon

More information

Services Overview. Northeast Blueprint

Services Overview. Northeast Blueprint Services Overview 2D CAD Conversions Paper to CAD 2D CAD Conversions Construction Engineering / CAD Services Construction Markups Consultant Drawings Coordinated Drawings As -Builts Steel Structural Detailing

More information

EXECUTIVE SUMMARY RESEARCH INTELLIGENCE DRIVING HEALTH SYSTEM TRANSFORMATION IN CANADA

EXECUTIVE SUMMARY RESEARCH INTELLIGENCE DRIVING HEALTH SYSTEM TRANSFORMATION IN CANADA Pan-Canadian Vision and Strategy for Health Services and Policy Research 2014 2019 EXECUTIVE SUMMARY RESEARCH INTELLIGENCE DRIVING HEALTH SYSTEM TRANSFORMATION IN CANADA Partners involved Alberta Cancer

More information

Best practices for new project creation - a Large Industry view

Best practices for new project creation - a Large Industry view Best practices for new project creation - a Large Industry view Knut Hufeld, +49 89 234 52653, knut.hufeld@infineon.com Infineon Technologies AG, 81726 Munich, Germany content 1 2 3 4 Motivation for funded

More information

JAMES M. CALVIN. 15 Montgomery Avenue Associate Professor

JAMES M. CALVIN. 15 Montgomery Avenue Associate Professor JAMES M. CALVIN Home Address: Work Address: 15 Montgomery Avenue Associate Professor Montville, NJ 07045 Computer Science Department Phone: (973) 808-0379 New Jersey Institute of Technology Newark, NJ

More information

DEFENSE ACQUISITION UNIVERSITY EMPLOYEE SELF-ASSESSMENT. Outcomes and Enablers

DEFENSE ACQUISITION UNIVERSITY EMPLOYEE SELF-ASSESSMENT. Outcomes and Enablers Outcomes and Enablers 1 From an engineering leadership perspective, the student will describe elements of DoD systems engineering policy and process across the Defense acquisition life-cycle in accordance

More information

UNIVERSITY OF CALCUTTA

UNIVERSITY OF CALCUTTA UNIVERSITY OF CALCUTTA FACULTY ACADEMIC PROFILE/ CV a.i.1. Full name of the faculty member: Arpita Das a.i.2. Designation: Assistant Professor a.i.3. Specialisation : Radio Physics and Electronics a.i.4.

More information

Towards affordance based human-system interaction based on cyber-physical systems

Towards affordance based human-system interaction based on cyber-physical systems Towards affordance based human-system interaction based on cyber-physical systems Zoltán Rusák 1, Imre Horváth 1, Yuemin Hou 2, Ji Lihong 2 1 Faculty of Industrial Design Engineering, Delft University

More information