Design and Research of Electronic Circuit Fault Diagnosis Based on Artificial Intelligence
|
|
- Rolf Richard
- 5 years ago
- Views:
Transcription
1 Design and Research of Electronic Circuit Fault Diagnosis Based on Artificial Intelligence Zhenyu Yang *, Ranran Yin Anhui Communications Vocational & Technical College, Hefei , Anhui Province, China *Corresponding author( Abstract Electronic circuit fault technology is a kind of circuit problem detection and location system, which is designed by constructing theory and object-oriented modularization with the support of computer aided system. The electronic circuit fault system based on artificial intelligence can realize the system, programming, test and maintenance of electronic circuits. This paper focuses on the system design method of electronic circuit fault system based on artificial intelligence, architecture design, function module design and user interface design of artificial intelligence electronic circuit fault system. The given fault system based on artificial intelligence has the functions of fault, simulation and test and fault library generation. The electronic circuit fault system can meet the rapid of common electronic circuits. Key words: Artificial intelligence; Electronic circuit; Fault 1. INTRODUCTION With the development of modern artificial intelligence technology, intelligent has made unprecedented progress in electronic circuits. Today, artificial intelligence is more than just a discipline, and it has become a new and effective tool for use in the field of intelligent. The application of artificial intelligence-assisted electronic circuit fault brings infinite vigor and vitality to circuit field. It makes today's circuit fault method, circuit fault method, circuit fault concept, circuit fault form and circuit fault structure. Therefore both the circuit fault theory and the circuit fault theory have undergone profound changes. It plays a decisive role in the construction and creation of new circuit fault methods and modes, and is conducive to the modernization of modern circuit and the trend of information technology to quality. Artificial intelligence-assisted electronic circuit fault is referred to CAI, and artificial intelligence-based circuit is referred to bit CBE, and CAI and CBE are artificial intelligence widely used in the field of circuit. Among these applications, artificial intelligence mainly plays two roles. One is to use artificial intelligence as a goal, and the other is to use artificial intelligence as a tool. Electronic circuit fault is referred to CMI, which refers to the use of artificial intelligence to guide the entire electronic circuit fault process of electronic circuit fault management system, including the organization of diagnostic processes and fault data, monitoring the specific diagnostic process, evaluating the diagnostic results and providing people with diagnostic information. Based on artificial intelligence technology referred to CAL, CBL and CAI basically the same meaning, it is used more in Europe. In addition, CBI also can express the same meaning. It is generally believed that CAI and CMI are two important sub-components of CBE. In practice, it is rare to use CAI or CMI alone and often together with CAI in CMI and CMI in CAI. Therefore, people often use CAI and CMI together. Therefore, this paper will no longer distinguish between the two and only use the term of CAI. This paper gives a more accurate definition of CAI. In a broad sense, CAI refers to the widespread use of artificial intelligence in the field of circuit diagnostics, including the use of artificial intelligence in a variety of ways in electronic circuit troubleshooting, research and management. In a narrow sense, CAI refers to people's use of artificial intelligence as a fault medium for electronic circuits to provide a diagnostic environment for fault. Fault is an electronic circuit fault form that is diagnosed through interaction with artificial intelligence. 2. ELECTRONIC CIRCUIT FAULT DIAGNOSIS TECHNOLOGY BASED ON ARTIFICIAL INTELLIGENCE 2.1. Traditional electronic circuit fault The traditional electronic circuit fault process is a cyclic process, which starts by determining the fault point of the circuit as the initial target and the general process, and ends with evaluating the. The basic process is shown in Figure 1. From the traditional electronic circuit fault process, it is not difficult to see that the electronic circuit fault process is a two-way communication process. 766
2 Circuit Fault target item selection evaluation Send behavior design Figure 1. Basic process for traditional electronic circuit fault 2.2. Electronic circuit fault principle based on artificial intelligence Electronic circuit fault based on artificial intelligence process is a fault and artificial intelligence interaction, and the gradual process of fault and the basic principle is shown in Figure 2. New diagnostic items Start information Diagnose the problem judgment strategy Choose content Receive information feedback Receive feedback End Figure 2. Basic principle of artificial intelligence-assisted electronic circuit fault It is not difficult to see from the basic principle of artificial intelligence-assisted electronic circuit fault that artificial intelligence plays an irreplaceable auxiliary role in this process. Artificial intelligence circuit fault and traditional electronic circuit fault should complement each other, artificial intelligence-assisted electronic circuit fault as a modern electronic circuit fault means, with clever ideas, the image demonstration, and leading electronic circuit fault into a brand new realm. It can use artificial intelligence to dynamically display the whole process of the development or reasoning of things, and use its drawing features to abstract the materialization of things, the visualization of fuzzy things and the practical theoretical things. At the same time, artificial intelligence auxiliary electronic circuit fault can only be used in irreplaceable occasions, or traditional electronic circuit fault cannot be realized under the conditions of value. In order to achieve the best electronic circuit fault, artificial intelligence-assisted electronic circuit fault must be properly used, and traditional electronic circuit 767
3 fault should also be used just right, and it is best to combine them organically to make up for each other's deficiencies, and play each other's advantage is our ultimate goal Design principles of artificial intelligence-based electronic circuit fault The preparation of electronic circuit fault software must use the specified tools. However, there are many circuit diagnostics that give the wrong direction to fault of artificial intelligence-assisted electronic circuits. We should select the appropriate software to choose the electronic circuit fault software. Artificial intelligence-assisted electronic circuit fault and new media electronic circuit fault confused, and even put them with the modern electronic circuit fault and electrochemical circuit equal, and even worse, artificial intelligence-assisted electronic circuit fault also known as the whole This is clearly unscientific media intermediary fault. In fact, they are different concepts, and have their own unique connotation and a very strict distinction. Artificial intelligence can assist electronic circuit fault generation and development of a very short time, and are still in the exploration, experiment and research stage. How should we deal with the problem of artificial intelligence-assisted electronic circuit fault scientifically? There are various opinions as well. In the face of different specific applications, we should avoid weaknesses as soon as possible to explore a suitable electronic circuit fault mode, and try to find the correct direction of fault of artificial intelligence-assisted electronic circuits as soon as possible. Based on the above, we think the design of artificial intelligence-assisted electronic circuit fault is a good way to solve the problem. Artificial intelligence-assisted electronic circuit fault application software is the designer of the electronic circuit fault idea, and the compiler by a certain idea is designed as coherent, systematic software. Electronic circuit fault purposes, content and the realization of the electronic circuit fault activities all belong to the electronic circuit fault strategy, including electronic circuit fault sequence, control methods. 3. ELECTRONIC CIRCUIT FAULT DIAGNOSIS DESIGN METHOD BASED ON ARTIFICIAL INTELLIGENCE 3.1. Electronic circuit fault design process based on artificial intelligence The electronic circuit diagnostic engineering shows that the artificial intelligence-based electronic circuit fault design process is the application of a life cycle of system design, and application system life cycle model generally includes the following components, including system, system design, system programming, system testing and system maintenance. The relationship between them and the process is shown in Figure 3. design Diagnosis becomes test Diagnosis and maintenance Demand Circuit structure code Unit Functional Expected Functional structure module Integrated Performance Figure 3.Design model of artificial intelligence-based electronic circuit fault 3.2. Electronic circuit fault design process based on artificial intelligence Artificial intelligence-based electronic circuit fault design is based on the following plans and quality. The artificial intelligence-based electronic circuit fault process provides a standardized maintenance process framework for maintenance personnel to carry out software development. The fault process consists of a series of methods, and fault description to guide maintenance personnel, and measure to manage the repair work. At the same time, it shows how to define the repair process, and how to measure its maintenance quality and maintenance efficiency. Fault process structure is shown in Figure
4 Figure 4. Fault process structure The first step in the troubleshooting of an electronic circuit is to diagnose the fault. The troubleshooting plan describes the work and at the same time diagnoses the plan data related to the plan summary record. When maintenance personnel work in accordance with the fault description, they record the time and fault data to the time and fault log. At the end of the diagnostic work in the post- phase, they measure the program size based on the log summary time and fault data and record these fault data into the summary fault list Structure design for artificial intelligence electronic circuit fault The artificial intelligence electronic circuit fault structure refers to the overall architecture that the software system exists, which is the design basis of the software system. Artificial intelligence electronic circuit fault structure design is shown in Figure 5. fxjss is on behalf of the and calculation of fault system, and zldl is on behalf of the DC circuit fault module, and gdgc is on behalf of the transition process fault module, and zxdl is on behalf of the sine circuit fault module, and qtdl is on behalf of other circuit fault module. Analysis and Calculation of the fault system mainly provides the operation of analyzing and calculating the related modules. fzsys is on behalf of simulation test fault system, and dzdl is on behalf of resistance circuit fault module, and yjdl is on behalf of the first-order circuit fault module, and sdkn is on behalf of dual-port network fault module, and sxdl is on behalf of three-phase circuit fault module. While sjscs is on behalf of the fault library generation system, and mscp is on behalf of the manual generation of fault library module, and ascp is on behalf of the automatic generation of fault library module. Fault library generation system can provide the main completion of the relevant module fault library generation tasks. While bztss is on behalf of help troubleshooting system, and bzzt is on behalf of thematic troubleshooting module. Help tips Fault system mainly provides system help to complete all the software diagnostic operations. 769
5 Figure 5. Structure design of artificial intelligence electronic circuit fault 3.4. Module design of artificial intelligence circuit fault software Fault function module design is the first item. Circuit artificial intelligence auxiliary electronic circuit fault application software is to analyze and calculate the basic idea of the module design, and to establish the mathematical model of circuit components, and then determine the corresponding mathematical algorithm to solve. Circuit components refer to resistors, capacitors, inductors, voltage sources and current sources. Fault simulation experiment function module is the second design. To complete the design of simulation experiment function module, we must first understand several concepts in virtual simulation, including electronic circuit fault simulation method, virtual diagnostic environment method and virtual laboratory. (1) Electronic circuit fault simulation method: Electronic circuit fault simulation is the use of artificial intelligence modeling and simulation technology to represent the structure and dynamics of some systems, providing an environment for fault for them to experience and observe. The use of electronic circuit fault simulation means to achieve the effect of electronic circuit fault method, which is called electronic circuit fault simulation. AI simulation allows fault to observe changes in the system by changing the size of the input data. Electronic circuit fault simulation software provides a non-dangerous, inexpensive way to troubleshoot and interact with the real world. We can get different results by manipulating the model elements and changing the different variables of the model. (2) Fault environment method: fault environment refers to the environment constructed by using the multimedia communication technology in the artificial intelligence network, allowing people and the fault to see each other and hear each other, and not only can the traditional environment be realized by using the real-time communication function. In most of the electronic circuit, fault activities can be carried out and use asynchronous communication capabilities to achieve unprecedented electronic circuit fault activities. It uses a networked diagnostic tool to diagnose spatial MUD, and object-oriented diagnostic space MOO supports asynchronous diagnostic communication form, and MOO is an object-oriented MUD, and it is through the core of a variety of MOO object diagnostic database to the way Users provide intelligent diagnostic environment. MOO provides real-time online communication, introducing the concept of metaphor for spatial diagnostics, so that diagnostic processes that are physically separated can interact and collaborate within a common mechanism. A circuit diagnostics MOO has a diagnostic target that utilizes various communication tools provided by MOO. The intelligent network platform is mainly a set of complete intelligent system developed for the fault of the network electronic circuits in the advanced mode of complex circuits. It integrates more than 40 modules such as active programs, virtual devices and intelligent testing to meet the actual needs of most electronic circuit fault. (3) Virtual Laboratory: virtual diagnostic laboratory is actually the use of intelligent diagnostic technology to simulate or fictitious situations for fault to observe, manipulate, and construct the circuit object, and the process can gain experience or discovery. For example, a software system using EWB's electronic diagnostic workbench allows diagnosticians to use the components, and it provides to construct a variety of analog and digital circuits and to dynamically test circuit performance. 770
6 (4) Intelligent fault library: the key to designing the intelligent simulation experiment function module is to design the virtual laboratory. The construction of the virtual laboratory is the basis of realizing the intelligent simulation experiment function module. Based on the premise of fault of electronic circuit, the design of intelligent fault library is designed according to the purpose and scope of application of fault software of artificial intelligence circuit. At the same time, automatic fault library generation is well established for the establishment of circuit component database basis. 4. CONCLUSION The ultimate goal of electronic circuit fault design based on artificial intelligence is to be able to realize the basic electronic circuit fault, and apply it to the basic electronic circuit fault system. In this paper, based on artificial intelligence design of electronic circuit fault, function module has a good quality evaluation and is made as a good fault of electronic circuits. In the process of design, this paper preliminarily has designed the basic functions of electronic circuit fault system based on the needs of fault of electronic circuits, including fault and calculation functions, fault simulation and experimental functions and fault library generation functions, which can effectively solve the fault of electronic circuit fault A large number of complex computing faults can avoid the troublesome circuit troubleshooting process. The artificial intelligence fault library generation function of this paper can complete the operation of manually generating a fault library or automatically generating a fault library according to the specific requirements, so as to meet the requirements of the electronic circuit fault work. References Chen S, Wu M, Zhao S. Analog Circuit Fault Diagnosis Based on DE OS-ELM, Computer Applications in Engineering Education, 2015, 1: Cui Y, Shi J, Wang Z. An analytical model of electronic fault on extension of the dependency theory,reliability Engineering & System Safety, 2015, 133: Du Q, Zhao X, He W, et al. Research and development of intelligent based on neural network, IEEE International Conference on Electronic Measurement & Instruments. IEEE, 2016: Gayathri K, Kumarappan N. Double Circuit EHV Transmission Lines Fault Location with RBF Based Support Vector Machine and Reconstructed Input Scaled Conjugate Gradient Based Neural Network,International Journal of Computational Intelligence Systems, 2015, 8(1): Grzechca D E. Construction of an Expert System Based on Fuzzy Logic for Diagnosis of Analog Electronic Circuits,International Journal of Electronics & Telecommunications, 2015, 61(1): Hou J, Wang Y, Gao T, et al. Fault feature extraction of power electronic circuits based on sparse decomposition, International Conference on Condition Monitoring and Diagnosis. IEEE, 2016: Kodavade D V. Knowledge based approach for fault in electronic circuit boards,international Journal of Control & Automation, 2016, 9. Li H, Niu G. A novel method for intelligent IETM platform based on cosine similarity and fuzzy semantic inference, Prognostics and System Health Management Conference. IEEE, 2017:1-6. Li M, Song D. Fault Diagnosis Method of Converter Circuit base on Wavelet Analyze and RF Algorithm,Electrical Engineering, Li M, Wang Y. Power electronic circuit soft fault methods comparative,electronic Measurement Technology, Li M. Research on Rapid Diagnosis of Agricultural Tractor Engine Based on Artificial Intelligence,Journal of Agricultural Mechanization Research, Meng P. Research on intelligent fault technology for power electronic circuits,wireless Internet Technology, Singh L. A new approach to Dedekinds theory of real numbers with special reference to the four fundamental operations, Test Conference, Proceedings. International. IEEE, Singh S, Joshi D. Computer applications in fault of power transformers - a review, International Conference on Computing for Sustainable Global Development. IEEE, 2015: Song Q, Zhai Y. Research on Fault Diagnosis of Power Electronic Circuits Based on LS-SVM,Mathematics in Practice & Theory, Sun Z, Jiang L, Xu Q, et al. On test syndrome merging for reasoning-based board-level functional fault, Design Automation Conference. IEEE, 2015: Wen C L, Fei-Ya L V, Bao Z J, et al. A Review of Data Driven-based Incipient Fault Diagnosis,Acta Automatica Sinica, 2016, 42(9): Ye F, Chakrabarty K, Zhang Z, et al. Self-learning and adaptive board-level functional fault, Design 771
7 Automation Conference. IEEE, 2015: Zhang S. Implementation of genetic algorithm on multiple fault,electronic Design Engineering, Zio E, Gola G. NEURO-FUZZY MODELING FOR FAULT DIAGNOSIS IN ROTATING MACHINERY, Applied Artificial Intelligence. 2015:
A Fault Detection Device for Energy Metering Equipment
2017 2nd International Conference on Manufacturing Science and Information Engineering (ICMSIE 2017) ISBN: 978-1-60595-516-2 A Fault Detection Device for Energy Metering Equipment Weineng Wang, Guangming
More informationThe Study on the Architecture of Public knowledge Service Platform Based on Collaborative Innovation
The Study on the Architecture of Public knowledge Service Platform Based on Chang ping Hu, Min Zhang, Fei Xiang Center for the Studies of Information Resources of Wuhan University, Wuhan,430072,China,
More informationApplication of Artificial Intelligence in Mechanical Engineering. Qi Huang
2nd International Conference on Computer Engineering, Information Science & Application Technology (ICCIA 2017) Application of Artificial Intelligence in Mechanical Engineering Qi Huang School of Electrical
More informationJournal Title ISSN 5. MIS QUARTERLY BRIEFINGS IN BIOINFORMATICS
List of Journals with impact factors Date retrieved: 1 August 2009 Journal Title ISSN Impact Factor 5-Year Impact Factor 1. ACM SURVEYS 0360-0300 9.920 14.672 2. VLDB JOURNAL 1066-8888 6.800 9.164 3. IEEE
More informationThis list supersedes the one published in the November 2002 issue of CR.
PERIODICALS RECEIVED This is the current list of periodicals received for review in Reviews. International standard serial numbers (ISSNs) are provided to facilitate obtaining copies of articles or subscriptions.
More informationResearch on Fuzzy Neural Network Assisted Train Positioning Based on GSM-R
Acta Technica 62 (2017), No. 6A, 313 320 c 2017 Institute of Thermomechanics CAS, v.v.i. Research on Fuzzy Neural Network Assisted Train Positioning Based on GSM-R Xiuhui Diao 1, Pengfei Wang 2, Weidong
More informationThe Application of Human-Computer Interaction Idea in Computer Aided Industrial Design
The Application of Human-Computer Interaction Idea in Computer Aided Industrial Design Zhang Liang e-mail: 76201691@qq.com Zhao Jian e-mail: 84310626@qq.com Zheng Li-nan e-mail: 1021090387@qq.com Li Nan
More informationPath Planning for Mobile Robots Based on Hybrid Architecture Platform
Path Planning for Mobile Robots Based on Hybrid Architecture Platform Ting Zhou, Xiaoping Fan & Shengyue Yang Laboratory of Networked Systems, Central South University, Changsha 410075, China Zhihua Qu
More informationSimulation and analysis of frequency modulation circuit based on LM566 Zhang Qian1, a, Hu Meng2, b
4th International Conference on Machinery, Materials and Computing Technology (ICMMCT 2016) Simulation and analysis of frequency modulation circuit based on LM566 Zhang Qian1, a, Hu Meng2, b 1 Zhenjiang
More informationComputer Control System Application for Electrical Engineering and Electrical Automation
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Computer Control System Application for Electrical Engineering and Electrical Automation To cite this article: Weigang Liu 2018
More informationStudy on Synchronous Generator Excitation Control Based on FLC
World Journal of Engineering and Technology, 205, 3, 232-239 Published Online November 205 in SciRes. http://www.scirp.org/journal/wjet http://dx.doi.org/0.4236/wjet.205.34024 Study on Synchronous Generator
More informationFault Detection and Diagnosis-A Review
Fault Detection and Diagnosis-A Review Karan Mehta 1, Dinesh Kumar Sharma 2 1 IV year Student, Department of Electronic Instrumentation and Control, Poornima College of Engineering 2 Assistant Professor,
More informationThe Research on a New Method of Fault Diagnosis in Distribution. Network Based on the Internet of Information Fusion Technology
International Forum on Management, Education and Information Technology Application (IFMEITA 2016) The Research on a New Method of Fault Diagnosis in Distribution Network Based on the Internet of Information
More informationFuzzy PID Speed Control of Two Phase Ultrasonic Motor
TELKOMNIKA Indonesian Journal of Electrical Engineering Vol. 12, No. 9, September 2014, pp. 6560 ~ 6565 DOI: 10.11591/telkomnika.v12i9.4635 6560 Fuzzy PID Speed Control of Two Phase Ultrasonic Motor Ma
More informationResearch and Application of Agricultural Science and Technology Information Resources Sharing Technology Based on Cloud Computing
2019 2nd International Conference on Computer Science and Advanced Materials (CSAM 2019) Research and Application of Agricultural Science and Technology Information Resources Sharing Technology Based on
More informationClassification of Voltage Sag Using Multi-resolution Analysis and Support Vector Machine
Journal of Clean Energy Technologies, Vol. 4, No. 3, May 2016 Classification of Voltage Sag Using Multi-resolution Analysis and Support Vector Machine Hanim Ismail, Zuhaina Zakaria, and Noraliza Hamzah
More informationReview of the Research Trends and Development Trends of Library Science in China in the Past Ten Years
2017 3rd International Conference on Management Science and Innovative Education (MSIE 2017) ISBN: 978-1-60595-488-2 Review of the Research Trends and Development Trends of Library Science in China in
More informationRegular Expression Based Online Aided Decision Making Knowledge Base for Quality and Security of Food Processing
BULGARIAN ACADEMY OF SCIENCES CYBERNETICS AND INFORMATION TECHNOLOGIES Volume 15, No 6 Special Issue on Logistics, Informatics and Service Science Sofia 2015 Print ISSN: 1311-9702; Online ISSN: 1314-4081
More informationMachinery Prognostics and Health Management. Paolo Albertelli Politecnico di Milano
Machinery Prognostics and Health Management Paolo Albertelli Politecnico di Milano (paollo.albertelli@polimi.it) Goals of the Presentation maintenance approaches and companies that deals with manufacturing
More informationFAULT DETECTION AND DIAGNOSIS OF HIGH SPEED SWITCHING DEVICES IN POWER INVERTER
FAULT DETECTION AND DIAGNOSIS OF HIGH SPEED SWITCHING DEVICES IN POWER INVERTER R. B. Dhumale 1, S. D. Lokhande 2, N. D. Thombare 3, M. P. Ghatule 4 1 Department of Electronics and Telecommunication Engineering,
More informationApplication of Computer Aided Design in Ceramic Art Design
2017 International Conference on Manufacturing Construction and Energy Engineering (MCEE 2017) ISBN: 978-1-60595-483-7 Application of Computer Aided Design in Ceramic Art Design Jin Gui Yao Abstract: Computer
More informationColor Image Segmentation in RGB Color Space Based on Color Saliency
Color Image Segmentation in RGB Color Space Based on Color Saliency Chen Zhang 1, Wenzhu Yang 1,*, Zhaohai Liu 1, Daoliang Li 2, Yingyi Chen 2, and Zhenbo Li 2 1 College of Mathematics and Computer Science,
More informationFAULT DIAGNOSIS AND PERFORMANCE ASSESSMENT FOR A ROTARY ACTUATOR BASED ON NEURAL NETWORK OBSERVER
7 Journal of Marine Science and Technology, Vol., No., pp. 7-78 () DOI:.9/JMST-3 FAULT DIAGNOSIS AND PERFORMANCE ASSESSMENT FOR A ROTARY ACTUATOR BASED ON NEURAL NETWORK OBSERVER Jian Ma,, Xin Li,, Chen
More informationDevelopment of Virtual Reality Simulation Training System for Substation Zongzhan DU
6th International Conference on Mechatronics, Materials, Biotechnology and Environment (ICMMBE 2016) Development of Virtual Reality Simulation Training System for Substation Zongzhan DU School of Electrical
More informationA Novel Fault Diagnosis Method for Rolling Element Bearings Using Kernel Independent Component Analysis and Genetic Algorithm Optimized RBF Network
Research Journal of Applied Sciences, Engineering and Technology 6(5): 895-899, 213 ISSN: 24-7459; e-issn: 24-7467 Maxwell Scientific Organization, 213 Submitted: October 3, 212 Accepted: December 15,
More informationSensor Technology and Industry Development Trend in China and Betterment Approaches
Sensor Technology and Industry Development Trend in China and Betterment Approaches Abstract Zhengqing Li University of Sanya, Sanya 572022, China Sensor technology is one of the most rapidly developing
More informationInternational Conference on Humanities and Social Science (HSS 2016)
International Conference on Humanities and Social Science (HSS 2016) The Construction of Discipline Groups in the Characteristic Development of Application-oriented Institutes Gen-yin CHENG1, 2, Jing-jing
More informationThe Key Information Technology of Soybean Disease Diagnosis
The Key Information Technology of Soybean Disease Diagnosis Baoshi Jin 1,2, Xiaodan Ma 3, Zhongwen Huang 4, and Yuhu Zuo 5,* 1 College of Agronomy Heilongjiang Bayi Agricultural University DaQing China
More informationAnalysis on Privacy and Reliability of Ad Hoc Network-Based in Protecting Agricultural Data
Send Orders for Reprints to reprints@benthamscience.ae The Open Electrical & Electronic Engineering Journal, 2014, 8, 777-781 777 Open Access Analysis on Privacy and Reliability of Ad Hoc Network-Based
More informationTeleoperation and System Health Monitoring Mo-Yuen Chow, Ph.D.
Teleoperation and System Health Monitoring Mo-Yuen Chow, Ph.D. chow@ncsu.edu Advanced Diagnosis and Control (ADAC) Lab Department of Electrical and Computer Engineering North Carolina State University
More informationResearch on the Effective Detection Methods of Large Scale IC Fault Signals. Junhong LI
International Conference on Computational Science and Engineering (ICCSE 2015) Research on the Effective Detection Methods of Large Scale IC Fault Signals Junhong LI Engineering Technology and Information
More informationPositioning System Performance Based on Different Pressure Sensors
Sensors & Transducers, Vol. 7, Issue 6, June 4, pp. -6 Sensors & Transducers 4 by IFSA Publishing, S. L. http://www.sensorsportal.com Positioning System Performance Based on Different Pressure Sensors
More informationApplication of Deep Learning in Software Security Detection
2018 International Conference on Computational Science and Engineering (ICCSE 2018) Application of Deep Learning in Software Security Detection Lin Li1, 2, Ying Ding1, 2 and Jiacheng Mao1, 2 College of
More informationDouble Criteria Feeder-Selection Method for Single-Phase Ground Fault of Resonant Grounding System Based on Multi-State Components
American Journal of Electrical and Electronic Engineering, 207, Vol. 5, No. 4, 44-5 Available online at http://pubs.sciepub.com/ajeee/5/4/4 Science and Education Publishing DOI:0.269/ajeee-5-4-4 Double
More informationResearch on Condition Monitoring of Power Big Data Based on Rough Sets
International Conference on Materials Engineering and Information Technology Applications (MEITA 2015) Research on Condition Monitoring of Power Big Data Based on Rough Sets Yulong Yan 1, a, Jilai Wu 2,
More informationA Regional University-Industry Cooperation Research Based on Patent Data Analysis
A Regional University-Industry Cooperation Research Based on Patent Data Analysis Hui Xu Department of Economics and Management Harbin Institute of Technology Shenzhen Graduate School Shenzhen 51855, China
More informationAnfis Based Soft Switched Dc-Dc Buck Converter with Coupled Inductor
IOSR Journal of Electronics and Communication Engineering (IOSR-JECE) e-issn: 2278-2834,p-ISSN: 2278-8735 PP 45-52 www.iosrjournals.org Anfis Based Soft Switched Dc-Dc Buck Converter with Coupled Inductor
More informationThe Study on the Application of the Intelligent Technology in the Sightseeing Agricultural Parks
Abstract The Study on the Application of the Intelligent Technology in the Sightseeing Agricultural Parks Lei Feng, Jie Zhao Department of Architecture, Henan Technical College of Construction, Zhengzhou
More informationResearch on Intellectual Property Benefits Allocation Mechanism Using Case of Regional-Development Oriented Collaborative Innovation Center of China
Open Journal of Applied Sciences, 2015, 5, 428-433 Published Online August 2015 in SciRes. http://www.scirp.org/journal/ojapps http://dx.doi.org/10.4236/ojapps.2015.58042 Research on Intellectual Property
More information*Corresponding author. Keywords: Sub-packaging Screw, Operating Characteristic, Stepping Motor, Pulse Frequency.
017 International Conference on Mechanical Engineering and Control Automation (ICMECA 017) ISBN: 978-1-60595-449-3 Study of Operating Characteristic of Stepping Motor Driven Sub-packaging Screw Huai-Yuan
More informationCOMPUTATONAL INTELLIGENCE
COMPUTATONAL INTELLIGENCE October 2011 November 2011 Siegfried Nijssen partially based on slides by Uzay Kaymak Leiden Institute of Advanced Computer Science e-mail: snijssen@liacs.nl Katholieke Universiteit
More informationFundamentals of Industrial Control
Fundamentals of Industrial Control 2nd Edition D. A. Coggan, Editor Practical Guides for Measurement and Control Preface ix Contributors xi Chapter 1 Sensors 1 Applications of Instrumentation 1 Introduction
More informationIJMIE Volume 2, Issue 4 ISSN:
A COMPARATIVE STUDY OF DIFFERENT FAULT DIAGNOSTIC METHODS OF POWER TRANSFORMER USING DISSOVED GAS ANALYSIS Pallavi Patil* Vikal Ingle** Abstract: Dissolved Gas Analysis is an important analysis for fault
More informationFault Diagnosis of Electronic Circuits Based on Matlab
International Journal of Research in Engineering and Science (IJRES) ISSN (Online): 2320-9364, ISSN (Print): 2320-9356 Volume 4 Issue 11 ǁ November. 2016 ǁ PP.06-13 Fault Diagnosis of Electronic Circuits
More informationRecent Progress on Mechanical Condition Monitoring and Fault diagnosis
Available online at www.sciencedirect.com Procedia Engineering 15 (2011) 142 146 Advanced in Control Engineeringand Information Science Recent Progress on Mechanical Condition Monitoring and Fault diagnosis
More information2014 New Jersey Core Curriculum Content Standards - Technology
2014 New Jersey Core Curriculum Content Standards - Technology Content Area Standard Strand Grade Level bands Technology 8.2 Technology Education, Engineering, Design, and Computational Thinking - Programming:
More informationA Novel Algorithm for Hand Vein Recognition Based on Wavelet Decomposition and Mean Absolute Deviation
Sensors & Transducers, Vol. 6, Issue 2, December 203, pp. 53-58 Sensors & Transducers 203 by IFSA http://www.sensorsportal.com A Novel Algorithm for Hand Vein Recognition Based on Wavelet Decomposition
More informationDetection of Rail Fastener Based on Wavelet Decomposition and PCA Ben-yu XIAO 1, Yong-zhi MIN 1,* and Hong-feng MA 2
2017 2nd International Conference on Information Technology and Management Engineering (ITME 2017) ISBN: 978-1-60595-415-8 Detection of Rail Fastener Based on Wavelet Decomposition and PCA Ben-yu XIAO
More informationDesign of Automatic Control System for NDT Device
Available online at www.sciencedirect.com Energy Procedia 17 (2012 ) 68 73 2012 International Conference on Future Electrical Power and Energy Systems Design of Automatic Control System for NDT Device
More informationEMC ANALYSIS OF ANTENNAS MOUNTED ON ELECTRICALLY LARGE PLATFORMS WITH PARALLEL FDTD METHOD
Progress In Electromagnetics Research, PIER 84, 205 220, 2008 EMC ANALYSIS OF ANTENNAS MOUNTED ON ELECTRICALLY LARGE PLATFORMS WITH PARALLEL FDTD METHOD J.-Z. Lei, C.-H. Liang, W. Ding, and Y. Zhang National
More informationExploration on Application of Electronic Circuit Simulation Technology in Electronic Application Technology. Mingming Fang
Advances in Engineering Research (AER), volume 107 2nd International Conference on Materials Engineering and Information Technology Applications (MEITA 2016) Exploration on Application of Electronic Circuit
More informationAn Integrated Framework for Assembly-Oriented Product Design and Optimization
Volume 19, Number 2 - February 2003 to April 2003 An Integrated Framework for Assembly-Oriented Product Design and Optimization By Dr. Qiang Su and Dr. Shana Shiang-Fong Smith KEYWORD SEARCH CAD CIM Design
More informationApplication of Singular Value Energy Difference Spectrum in Axis Trace Refinement
Sensors & Transducers 204 by IFSA Publishing, S. L. http://www.sensorsportal.com Application of Singular Value Energy Difference Spectrum in Ais Trace Refinement Wenbin Zhang, Jiaing Zhu, Yasong Pu, Jie
More informationDesign of high precision current signal source on DDS Han Ya Kun1, a, Suo Xue Song*,1, b
4th National Conference on Electrical, Electronics and Computer Engineering (NCEECE 2015) Design of high precision current signal source on DDS Han Ya Kun1, a, Suo Xue Song*,1, b 1 Agricultural University
More informationEffects of Measuring Instrument and Measuring Points on Circular Coordinate Measurement Precision
2016 International Conference on Computer Engineering and Information Systems (CEIS-16) Effects of Measuring Instrument and Measuring Points on Circular Coordinate Measurement Precision Jun Wu, Li-Chang
More informationSynergy Model of Artificial Intelligence and Augmented Reality in the Processes of Exploitation of Energy Systems
Journal of Energy and Power Engineering 10 (2016) 102-108 doi: 10.17265/1934-8975/2016.02.004 D DAVID PUBLISHING Synergy Model of Artificial Intelligence and Augmented Reality in the Processes of Exploitation
More informationInnovating Method of Existing Mechanical Product Based on TRIZ Theory
Innovating Method of Existing Mechanical Product Based on TRIZ Theory Cunyou Zhao 1, Dongyan Shi 2,3, Han Wu 3 1 Mechanical Engineering College Heilongjiang Institute of science and technology, Harbin
More informationOnline Diagnosis and Monitoring for Power Distribution System
Energy and Power Engineering, 1,, 59-53 http://dx.doi.org/1.3/epe.1. Published Online November 1 (http://www.scirp.org/journal/epe) Online Diagnosis and Monitoring for Power Distribution System Atef Almashaqbeh,
More informationAC : APPLICATIONS OF WAVELETS IN INDUCTION MACHINE FAULT DETECTION
AC 2008-160: APPLICATIONS OF WAVELETS IN INDUCTION MACHINE FAULT DETECTION Erick Schmitt, Pennsylvania State University-Harrisburg Mr. Schmitt is a graduate student in the Master of Engineering, Electrical
More informationPartial Discharge Monitoring and Diagnosis of Power Generator
Partial Discharge Monitoring and Diagnosis of Power Generator Gao Wensheng Institute of High Voltage & insulation tech. Electrical Eng. Dept., Tsinghua University Wsgao@tsinghua.edu.cn Currently preventive
More informationElectrical Machines Diagnosis
Monitoring and diagnosing faults in electrical machines is a scientific and economic issue which is motivated by objectives for reliability and serviceability in electrical drives. This concern for continuity
More informationWednesday, October 29, :00-04:00pm EB: 3546D. TELEOPERATION OF MOBILE MANIPULATORS By Yunyi Jia Advisor: Prof.
Wednesday, October 29, 2014 02:00-04:00pm EB: 3546D TELEOPERATION OF MOBILE MANIPULATORS By Yunyi Jia Advisor: Prof. Ning Xi ABSTRACT Mobile manipulators provide larger working spaces and more flexibility
More informationThe Elevator Fault Diagnosis Method Based on Sequential Probability Ratio Test (SPRT)
Automation, Control and Intelligent Systems 2017; 5(4): 50-55 http://www.sciencepublishinggroup.com/j/acis doi: 10.11648/j.acis.20170504.11 ISSN: 2328-5583 (Print); ISSN: 2328-5591 (Online) The Elevator
More informationIowa State University Library Collection Development Policy Computer Science
Iowa State University Library Collection Development Policy Computer Science I. General Purpose II. History The collection supports the faculty and students of the Department of Computer Science in their
More informationResearch on the Capability Maturity Model of Digital Library Knowledge. Management
2nd Information Technology and Mechatronics Engineering Conference (ITOEC 2016) Research on the Capability Maturity Model of Digital Library Knowledge Management Zhiyin Yang1 2,a,Ruibin Zhu1,b,Lina Zhang1,c*
More informationAI MAGAZINE AMER ASSOC ARTIFICIAL INTELL UNITED STATES English ANNALS OF MATHEMATICS AND ARTIFICIAL
Title Publisher ISSN Country Language ACM Transactions on Autonomous and Adaptive Systems ASSOC COMPUTING MACHINERY 1556-4665 UNITED STATES English ACM Transactions on Intelligent Systems and Technology
More informationImpact of Integrated Application of Information Technology on MRMIS
Impact of Integrated Application of Information Technology on MRMIS Haizhong An Wenjing Yu China University of Geosciences, Beijing ABSTRACT Under the influence of Digital Earth, information technology
More informationEmpirical Research on Policy Evaluation of Innovation of Science and Technology in Shanghai
2016 International Conference on Sustainable Energy, Environment and Information Engineering (SEEIE 2016) ISBN: 978-1-60595-337-3 Empirical Research on Policy Evaluation of Innovation of Science and Technology
More informationROTATING MACHINERY FAULT DIAGNOSIS BASED ON WAVELET FUZZY NEURAL NETWORK
ROTATING MACHINERY FAULT DIAGNOSIS BASED ON WAVELET FUZZY NEURAL NETWORK Bin Peng Zhenquan Liu I.College of Mechanical-Electronic Engineering, Lanzhou University of Technology, Lanzhou 730050, China; 2.
More informationApply Functional Modelling to Consequence Analysis in Supervision Systems. Abstract
Template EHPG_paper version 8 2011-08-04 Apply Functional Modelling to Consequence Analysis in Supervision Systems Xinxin Zhang 1, Morten Lind 2, Giulio Gola 3, and Ole Ravn 4 1,2,4 Technical University
More informationIntelligent Eddy Current Crack Detection System Design Based on Neuro-Fuzzy Logic
Intelligent Eddy Current Crack Detection System Design Based on Neuro-Fuzzy Logic Data fusion ECT signal processing Oct. 09 th, 2013 Baoguang Xu MASc. Concordia University Montreal 1 Outline Project description
More informationDesign of an insulator leakage current measurement system based on PLC
Journal of Physics: Conference Series Design of an insulator leakage current measurement system based on PLC To cite this article: Changhai Sun et al 2013 J. Phys.: Conf. Ser. 418 012090 View the article
More informationThe Design and Realization of High Precision Micrometric. Displacement Measuring System Based on LVDT
The Design and Realization of High Precision Micrometric Displacement Measuring System Based on LVDT Jiang Biao,Rongzheng Li 2 School of Electronic and Electrical Engineering, 2 Shanghai University of
More informationA Discussion on Smart City Management Based on Meta-Synthesis Method
Management Science and Engineering Vol. 8, No. 1, 2014, pp. 68-72 DOI:10.3968/j.mse.1913035X20140801.4404 ISSN 1913-0341 [Print] ISSN 1913-035X [Online] www.cscanada.net www.cscanada.org A Discussion on
More informationTheoretical Study of Quick Design Modification of the Auto CAD-based Serialization of Products
Sensors & Transducers 2013 by IFSA http://www.sensorsportal.com Theoretical Study of Quick Design Modification of the Auto CAD-based Serialization of Products Yongjun Feng University of Science and Technology
More informationA New AC Servo Motor Load Disturbance Method
, pp.313-317 http://dx.doi.org/10.14257/astl.2016. A New AC Servo Motor Load Disturbance Method Xiao Qianjun 1 and Zhang Xiaoqin 1, 1 Chongqing Industry Polytechnic College, Chongqing 401120, China Abstract.
More informationDesign of expert system for fault diagnosis of water quality monitoring devices
Design of expert system for fault diagnosis of water quality monitoring devices Qiucheng Li 1, Daoliang Li 1,*, Zhenbo Li 1, 1 College of Information and Electrical Engineering, China Agricultural University,
More informationResearch Article Research of Smart Car s Speed Control Based on the Internal Model Control
Abstract and Applied Analysis, Article ID 274293, 5 pages http://dx.doi.org/.55/24/274293 Research Article Research of Smart Car s Speed Control Based on the Internal Model Control Han Yu, Hamid Reza Karimi,
More informationThe Key to the Internet-of-Things: Conquering Complexity One Step at a Time
The Key to the Internet-of-Things: Conquering Complexity One Step at a Time at IEEE QRS2017 Prague, CZ June 19, 2017 Adam T. Drobot Wayne, PA 19087 Outline What is IoT? Where is IoT in its evolution? A
More information06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics
/ SCHOOL OF TECHNOLOGY MANAGEMENT &ENGINEERING FINAL EXAMINATION TIME TABLE (ACADEMIC YEAR: 2017 18) MASTER OF BUSINESS ADMINISTRATION IN TECHNOLOGY MANAGEMENT (2017-22) YEAR: I, SEMESTER: II CAMPUS: MUMBAI,
More informationAn Engraving Character Recognition System Based on Machine Vision
2017 2 nd International Conference on Artificial Intelligence and Engineering Applications (AIEA 2017) ISBN: 978-1-60595-485-1 An Engraving Character Recognition Based on Machine Vision WANG YU, ZHIHENG
More information01.04 Demonstrate how corporations can often create demand for a product by bringing it onto the market and advertising it.
Course Title: Exploring Technology and Career Planning Course Number: 8600220 Course Length: Semester CTE Standards and Benchmarks 01.0 Demonstrate an understanding of the characteristics and scope of
More informationThe Pitch Control Algorithm of Wind Turbine Based on Fuzzy Control and PID Control
Energy and Power Engineering, 2013, 5, 6-10 doi:10.4236/epe.2013.53b002 Published Online May 2013 (http://www.scirp.org/journal/epe) The Pitch Control Algorithm of Wind Turbine Based on Fuzzy Control and
More information02.03 Identify control systems having no feedback path and requiring human intervention, and control system using feedback.
Course Title: Introduction to Technology Course Number: 8600010 Course Length: Semester Course Description: The purpose of this course is to give students an introduction to the areas of technology and
More informationDESIGN OF A NOVEL WIDEBAND LOOP ANTENNA WITH PARASITIC RESONATORS. Microwaves, Xidian University, Xi an, Shaanxi, China
Progress In Electromagnetics Research Letters, Vol. 37, 47 54, 2013 DESIGN OF A NOVEL WIDEBAND LOOP ANTENNA WITH PARASITIC RESONATORS Shoutao Fan 1, *, Shufeng Zheng 1, Yuanming Cai 1, Yingzeng Yin 1,
More informationEPD ENGINEERING PRODUCT DEVELOPMENT
EPD PRODUCT DEVELOPMENT PILLAR OVERVIEW The following chart illustrates the EPD curriculum structure. It depicts the typical sequence of subjects. Each major row indicates a calendar year with columns
More informationTable of Contents. Table of Contents Automotive Technology Vehicle Electronics Trainer Generator UniTrain Three-phase Alternator/Generator
Table of Contents Table of Contents Automotive Technology Generator UniTrain 1 2 2 3 4 4 Lucas Nülle GmbH Page 1/5 www.lucas-nuelle.com Automotive Technology A modern vehicle is characterised by its high
More informationComputer Sciences & Engineering Titles
Bapatla Engineering College :: Library Science Direct e-journals 2016 subscribed by the College Library. Computer Sciences & Engineering - 275 Titles S No ISSN Journal Title Imprint Specialization Subject
More informationKnowledge-based Collaborative Design Method
-d Collaborative Design Method Liwei Wang, Hongsheng Wang, Yanjing Wang, Yukun Yang, Xiaolu Wang Research and Development Center, China Academy of Launch Vehicle Technology, Beijing, China, 100076 Wanglw045@163.com
More informationCHAPTER 1 INTRODUCTION
1 CHAPTER 1 INTRODUCTION 1.1 BACKGROUND The increased use of non-linear loads and the occurrence of fault on the power system have resulted in deterioration in the quality of power supplied to the customers.
More informationDIAGNOSIS OF ROLLING ELEMENT BEARING FAULT IN BEARING-GEARBOX UNION SYSTEM USING WAVELET PACKET CORRELATION ANALYSIS
DIAGNOSIS OF ROLLING ELEMENT BEARING FAULT IN BEARING-GEARBOX UNION SYSTEM USING WAVELET PACKET CORRELATION ANALYSIS Jing Tian and Michael Pecht Prognostics and Health Management Group Center for Advanced
More informationA Smart Substation Field Secondary Device Testing Technique Based on Recurrence Principle
Journal of Power and Energy Engineering, 214, 2, 244-251 Published Online April 214 in SciRes. http://www.scirp.org/journal/jpee http://dx.doi.org/1.4236/jpee.214.2435 A Smart Substation Field Secondary
More informationPath Planning in Dynamic Environments Using Time Warps. S. Farzan and G. N. DeSouza
Path Planning in Dynamic Environments Using Time Warps S. Farzan and G. N. DeSouza Outline Introduction Harmonic Potential Fields Rubber Band Model Time Warps Kalman Filtering Experimental Results 2 Introduction
More informationResearch on Design and Application of Self-made Simulation Test Platform for University Lab
Research on Design and Application of Self-made Simulation Test Platform for University Lab P. Zhang, Y. Zhang, and Y. Chang Abstract This paper will discuss how to design and assemble a simulation test
More informationAn Improved DV-Hop Localization Algorithm Based on Hop Distance and Hops Correction
, pp.319-328 http://dx.doi.org/10.14257/ijmue.2016.11.6.28 An Improved DV-Hop Localization Algorithm Based on Hop Distance and Hops Correction Xiaoying Yang* and Wanli Zhang College of Information Engineering,
More informationChangjiang Yang. Computer Vision, Pattern Recognition, Machine Learning, Robotics, and Scientific Computing.
Changjiang Yang Mailing Address: Department of Computer Science University of Maryland College Park, MD 20742 Lab Phone: (301)405-8366 Cell Phone: (410)299-9081 Fax: (301)314-9658 Email: yangcj@cs.umd.edu
More informationA Novel Fuzzy Neural Network Based Distance Relaying Scheme
902 IEEE TRANSACTIONS ON POWER DELIVERY, VOL. 15, NO. 3, JULY 2000 A Novel Fuzzy Neural Network Based Distance Relaying Scheme P. K. Dash, A. K. Pradhan, and G. Panda Abstract This paper presents a new
More informationBuilding a Machining Knowledge Base for Intelligent Machine Tools
Proceedings of the 11th WSEAS International Conference on SYSTEMS, Agios Nikolaos, Crete Island, Greece, July 23-25, 2007 332 Building a Machining Knowledge Base for Intelligent Machine Tools SEUNG WOO
More informationDomain: Computer Science and Information Technology Curricula for the First Year (2012/2013)
Curricula for the First Year (2012/2013) Type/e F Mathematics 1 3 2 - - E - - - - - 5 F Mathematics 2 3 2 - - E - - - - - 5 F Computer programming 2-2 - E - - - - - 5 D Introduction to operating systems
More informationAdvanced Software Developments for Automated Power Quality Assessment Using DFR Data
Advanced Software Developments for Automated Power Quality Assessment Using DFR Data M. Kezunovic, X. Xu Texas A&M University Y. Liao ABB ETI, Raleigh, NC Abstract The power quality (PQ) meters are usually
More information