Enabling Manufacturing Competitiveness and Economic Sustainability
|
|
- Jordan Poole
- 5 years ago
- Views:
Transcription
1 Enabling Manufacturing Competitiveness and Economic Sustainability
2
3 Hoda A. ElMaraghy Editor Enabling Manufacturing Competitiveness and Economic Sustainability Proceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011), Montreal, Canada, 2 5 October
4 Editor Professor Hoda A. ElMaraghy University of Windsor Intelligent Manufacturing Systems Center 204 Odette Building 401 Sunset Avenue Windsor, Ontario Canada N9B 3P4 ISBN e-isbn DOI / Springer Heidelberg Dordrecht London New York Library of Congress Control Number: c Springer-Verlag Berlin Heidelberg 2012 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: estudio Calamar S.L., Heidelberg Printed on acid-free paper Springer is part of Springer Science+Business Media (
5 Preface Globalization, unpredictable markets, increased product customization and the quest for competitive advantages are but a few of the many challenges facing manufacturing enterprises now and in the foreseeable future. Frequent changes in product, production technologies and manufacturing systems are evident today along with their significant implementation costs. Increased competitiveness requires enhanced quality and value through increasingly innovative products, materials and production technologies. One key strategy for manufacturing success and economic sustainability is to satisfy the market demand for increased product variants while reducing the resulting variations in their manufacturing and associated cost and complexity. This trend is on the rise as evidenced by the paradigm shifts witnessed in manufacturing systems and their increased flexibility and responsiveness to cope with the evolution of both products and manufacturing systems. A host of external and internal change drivers exist that affect manufacturing enterprises at various levels from strategic planning for re-positioning the business, to tactical control of production plans and facilities to achieve a high degree of responsiveness. The changing manufacturing environment requires careful effort to prolong the life of manufacturing systems by making them easily adaptable and facilitating the integration of new technologies and new functions. This requires pre-designing effective paths for change and providing innovative change enablers and adaptation mechanisms. The availability of solutions that go beyond adaptability and flexibility will thus be crucial for enhancing productivity and ensuring competitiveness and economic sustainability in the manufacturing sector. The theme of the 4 th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is Enabling Manufacturing Competitiveness and Economic Sustainability. The leading edge research and best implementation practices and experiences, which address these important issues and challenges, presented in the CARV2011conference are included in this book. It is organized in 5 Parts and contains 107 papers contributed by 242 authors from around the world. The topics cover leading edge advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, reconfigurability and flexibility. It treats new and important concepts such as the dynamic product families and platforms, and co-evolution of products and systems, and methods for enhancing manufacturing systems economic sustainability and prolonging their life for use to produce more than one product generation. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. An outline of industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. Professor Hoda A. ElMaraghy, PhD, PEng, FCIRP, FSME, FCSME Canada Research Chair (CRC) in Manufacturing Systems Chair, CARV2011 Conference
6 Acknowledgements The 4th International Conference on Changeable, Adaptable, Reconfigurable and Virtual Production (CARV2011) was held in Montreal, Canada. The conference was organized by the Intelligent Manufacturing System (IMS) Centre, University of Windsor, Canada and the Institute for Machine Tools and Industrial Management (iwb), Technical University of Munich, Germany. It is sponsored by the International Production Engineering Academy (CIRP) and the Canadian Society for Mechanical Engineering (CSME). CARV2011 provided an excellent forum for engineers, scientists and researchers from academia and industry to discuss current practices and future challenges germane to the success and survival of manufacturing in a changing and globally competitive environment. It offered an environment conducive to networking and exchange among researchers and practitioners in academia and industry. On behalf of the conference Co-Chairs, Professor Michael Zaeh, Professor Gunther Reinhart and Professor Waguih ElMaraghy, I thank all authors for their high quality contributions and their cooperation in the manuscript preparation process. We also extend our thanks and appreciation to the International Scientific Committee members who provided valuable input and expert judgement during the review and evaluation process. We express our gratitude to all members of the teams (too many to list) of qualified and expert assistants from the Intelligent Manufacturing Systems (IMS) Centre, University of Windsor, Canada and the Institute for Machine Tools and Industrial Management (iwb), Technical University of Munich, Germany, who demonstrated a high level of dedication, professionalism and collaboration. I am particularly grateful to Dr. Tarek AlGeddawy and Dr. Sameh Badrous (IMS Centre) for their expert assistance in putting this document together in record time. Thanks also go out to Ms. Erica Lyons (IMSC) for her continued assistance throughout and to Mr. Michael Niehues (iwb) for his participation in the conference organization and logistical support. Dr. Hoda A. ElMaraghy
7 Conference Chair Professor Hoda A. ElMaraghy (Canada) Co-Chairs: Professor Michael F. Zaeh (Germany) Professor Waguih H. ElMaraghy (Canada) Professor Gunther Reinhart (Germany) INTERNATIONAL SCIENTIFIC COMMITTEE Prof. Abele, E (Germany) Prof. Azab, A. (Canada) Prof. Balazinski, M. (Canada) Prof. Bernard, A. (France) Prof. Bley, H. (Germany) Prof. Chryssolouris, G. (Greece) Prof. Cunha, P.F. (Portugal) Prof. Deif, A. (Egypt) Prof. ElMaraghy, H.A. (Canada) Prof. ElMaraghy, W.H. (Canada) Prof. Hu, S.J. (USA) Prof. Jovane, F. (Italy) Prof. Kuhlang, P. (Austria) Prof. Kuzgunkaya, O. (Canada) Prof. Laperrière, L. (Canada) Prof. Maropoulos, P.G. (UK) Prof. Monostori, L. (Hungary) Prof. Müller, E. (Germany) Prof. Nee, A. (Singapore) Prof. Newman, S. (UK) Prof. Nyhuis, P. (Germany) Prof. Pasek, Z. (Canada) Prof. Perrone, G. (Italy) Prof. Reinhart, G (Germany) Prof. Schönsleben, P. (Switzerland) Prof. Schuh, G. (Germany) Prof. Shea, K. (Germany) Prof. Sihn, W. (Austria) Prof. Soderberg, R. (Sweden) Prof. Teti, R. (Italy) Prof. Tichkiewitch, S. (France) Prof. Tolio, T. (Italy) Prof. Torvinen, S. (Finland) Prof. Tracht, K. (Germany) Prof. Tseng, M. (Hong Kong) Prof. Urbanic, J. (Canada) Prof. Vancza, J. (Hungary) Prof. van Houten, F. (Netherlands) Prof. Westkämper, E. (Germany) Prof. Windt, K. (Germany) Prof. Zaeh, M. F. (Germany)
8 Contents PARTI: VISIONANDFUTUREPRESPECTIVES...1 ChangeinManufacturing ResearchandIndustrialChallenges...2 H.ElMaraghy,T.AlGeddawy,A.Azab,W.ElMaraghy AdaptiveJobControlintheCognitiveFactory...10 M.F.Zaeh,M.Ostgathe,F.Geiger,G.Reinhart MassCustomisationasaCompetitiveFactorforSustainability...18 A.Bernard,J.Daaboul,F.Laroche,C.DaCunha PARTII: MANUFACTURINGSYSTEMS...27 MANUFACTURINGSYSTEMDESIGN,PLANNING,OPERATION,ANDCONTROL...28 LinnaeanandCladisticClassificationsofManufacturingSystems...29 J.S.Baldwin,C.RoseAnderssen,K.Ridgway IntegratingAbilityLimitationsintoAssemblySystemDesign...35 G.Reinhart,J.Egbers SelectionCatalogueofKinematicConfigurationforPickandPlaceApplication...41 K.Chandrasekaran,A.Djuric,W.H.ElMaraghy ATransitioninProductionandPlanningforaChangeableMicroManufacturingSystem...47 B.Röhlig,J.P.Wulfsberg Usingformalmethodstomodelhybridmanufacturingprocesses...52 AydinNassehi,StephenNewman,VimalDhokia,ZichengZhu,RezaImaniAsrai ConsideringReconfigurabilityCharacteristicsinProductionSystemDesign...57 CarinRösiö OntologydrivenRequirementsElicitationinProductConfigurationSystems...63 Wicaksono,H.;Schubert,V.;Rogalski, S.;AitLaydi, Y.;Ovtcharova, J. EarlyAlertCockpitsforChangeableManufacturingSystems...68 Spath,D.;Gerlach,S.;Scholtz,O.;Hämmerle,M.;Krause,T. NewMethodstoCreateVariantsof3DSimulationModelsofManufacturingSystems...74 R.Wischnewski,J.Rossmann,O.Stern Productvariety,flexibilityandenergyuseinhotrollingmills...80 J.Storck LostValueMapping AFastMethodtoTrackLostValueinaProductionFlow...86 PawelPawlewski,ZbigniewJ.Pasek CHANGEABILITY,FLEXIBILITY,RECONFIGURABILITYANDTHEIRMETRICS...92 Asurveyonchangeabilityofmachinetools...93 PhilipHollstein;HeinerLasi;HansGeorgKemper QuantifyingtheEffectofEnterpriseStrategicFlexibility...99 A.Arafa,W.H.ElMaraghy DecisionMakingDuringDesignandReconfigurationofModularAssemblyLines K.Tracht,S.Hogreve Developmentofmanufacturingprocesschainsconsideringuncertainty S.O.Schmitt,J.Avemann,P.Groche OptimalSequencingofMachiningOperationsforChangeableManufacturing AhmedAzab,AttiaH.Gomaa ManufacturingConceptsoftheFuture UpcomingTechnologiesSolvingUpcomingChallenges R.Hadar,A.Bilberg
9 AnalysisofReconfigurable2DOFMachineryforIntelligentManufacturingSystems AnaDjuric;WaguihH.ElMaraghy MobileSystemsforMachiningLargeWorkPieces Neugebauer,R.,Priber,U.,Rentzsch,H.,Ihlenfeldt,S.,Hoffmann,D. MethodologyforFlexibilityMeasurementinSemiautomaticProduction Rogalski,S.;Wicaksono,H. AutomaticConfiguration(Plug&Produce)ofRobotSystems DataInterpretationandExchange G.Reinhart,S.Krug ADAPTABILITYANDEMERGENCE EnhancedSurvivabilityaFrameworkofSelfHealingMechanisms InstallationUsingAxiomaticDesign T.M Dealingwiththeunpredictable:AnEvolvableRoboticAssemblyCell M.Onori,P.Neves,H.Akillioglu,A.Maffei,A.Hofmann,N.Siltala TheManufacturingAdaptabilityScorecardatooltoanalyzethebenefitofautonomousproductionprocesses CorinnaFohrholz,NorbertGronau FrameworkforDistributedManufacturingSystems H.Nylund,K.Salminen,P.H.Andersson Conceptionandevaluationofanagedifferentiatedtaskanalysisandscreeningmethod Keil,SpannerUlmer AdaptiveProcessChainOptimisationofManufacturingSystems B.Denkena,J.Henjes,L.E.Lorenzen MappingtheTaskTimePerformanceofHumanCentredAssemblySystems R.Folgado,E.Henriques,P.Peças PARTIII: PRODUCTANDPRODUCTIONDEVELOPMENTANDCODEVELOPMENT COEVOLUTIONOFPRODUCTS,PROCESSESANDMANUFACTURINGSYSTEMS FromDedicatedtoPlatformBasedCoDevelopmentofProductsandManufacturingSystems M.T.Michaelis,H.Johannesson NatureInspiredCoevolutionintheManufacturingWorldofArtefacts T.AlGeddawy,H.A. ElMara Fromproductarchitecturetoassemblysequence:amethodtodevelopconceptualDesignforAssemblybasedon interfaceanalysis C.Favi,M.Germani Networkedproductandproductiondevelopmentforlithiumionbatteries Kampker,A.;Franzkoch,B.;Nowacki,C. RequirementsManagementasaSuccessFactorforSimultaneousEngineering G.Reinhart,J.F.Meis VARIANTORIENTEDMODELLINGANDMANAGEMENTOFVARIATION BottomUpComponentOrientedFEModellingofMachineTools A.Dadalau,A.Verl Assessmentoftheproductbasedtimeexpandingeffect Jander,H.,SpannerUlmer,B. Featurebasedcomponentdescriptionforfunctionalgradedparts F.Bauer,D.Dettmer,J.Gausemeier TowardsaFeatureBasedandFineGrainProductRepositoryforHeterogeneousComputerAidedSystems M.M.Uddin,Y.S.Ma SustainableSystemRiskAnalysis:ATripleBottomLineApproach Z. A.AliQrehi,W.ElMaraghy PRODUCT,PROCESSANDSYSTEMSMODELLING,PROTOTYPINGANDDEVELOPMENT ConstructionofaDigitalFacebow E.Solaberrieta,A.Arias,O.Etxaniz,R.Minguez EvaluationofRFIDTechnologyApplicationinProductionofFiberReinforcedPlastics T.R.Philipp,G.Reinhart Contents
10 Contents SelectingVirtualRealityToolsinrelationwiththeirusecontext R.G.J.Damgrave,D.Lutters,J.P.Thalen AFrameworkEnablingDataIntegrationforVirtualProduction Reinhard,R.;Meisen,T.;Beer,T.;Schilberg,D.;Jeschke,S. AFoundationforIntegratingHandHeldMobileDevicesinaComputerAidedManufacturingEnvironment R.Hedrick,J.Urbanic ParametricInternalMatrixStructuresforComponentsBuiltbyFusedDepositionModelling L.Villalpando,J.Urbanic AnExperimentalStudytoDetermineGeometricandDimensionalAccuracyImpactFactorsforFusedDeposition..293 S.Saqib,J.Urbanic FlexibleToolpathGenerationforVariableGeometry Sawula,D.A.,Lin,Y.P.,Fleisig,R.V.,Spence,A.D. ASystemforProvidingVisualFeedbackofMachineFaults K.Hughes,G.Szkilnyk,B.Surgenor Aninnovativecrosswedgerollingpreformingoperationforwarmforging H.Kache,R.Nickel,B.A.Behrens SystemDynamicModelsandRealtimeSimulationofComplexMaterialFlowSystems S.Hoher,P.Schindler,S.Göttlich,V.Schleper,S.Röck Earlyidentificationofmanufacturingprocessinfluencesonproductfailurebehaviour StefanBracke,StephanHaller TheaspectsofenergyintheBodyinWhiteprocessregardingproductdevelopmentandproductionplanning M.Schacht,R.Schulte,F.Mantwill RefiningProcessLogicFromCNCPartProgrammesforIntegratedSTEPNCCompliantManufacturing X.Zhang,A.Nassehi,V.G.Dhokia,S.T.Newman ENABLERSOFCHANGE SynchronisationofDistributedConfigurationToolsusingFeaturesModels Brecher,C.;Karlberger,A.;Herfs,W. ChangeManagementasanEnablerofEmployeeKnowledgeIntegrationintotheDesignofPlanningProcedures Tracht,K.,Weikert,F.,Funke,L. Areconfigurationconcepttoenableversatileproductionintheautomotivefactories SarfrazUlHaqueMinhas,UlrichBerger MethodologyfortheSupportofReconfigurationProcessesintheAutomotiveBodyShop Reinhart,G.;Meling,F. GripperwithIntegratedThreeDimensionalForceDetection K.Tracht,S.Hogreve,F.Borchers ChangeBeneficialProcessArchitecturesandtheHumanasaChangeEnabler DennisGossmann;CarstenWagner;TimKlemke;PeterNyhuis Adaptive and Selective Assembling of Microscope Objectives K.-P. Zocher PARTIV: GLOBALCOMPETITIVENESSANDSUSTAINABILITY DRIVERS,ENABLERS,STRATEGIESANDINDICES AnAsianPerspectiveonGlobalSourcing Schneider,C.,Finke,G.,Sproedt,A.,Alard,R.,Schönsleben,P. StrategicEvaluationofTechnologyChainsforProducingCompanies Reinhart,G.,Schindler,S. StrategicImpactofGlobalProduction HowtoFindtheSuccessMeasures HeinrichBürstner Coopetitionasafacilitatorofmanufacturingcompetitiveness:opportunitiesandthreats F.Ehrenmann,M.Reiss EnablingCompetitiveDesignofNextGenerationReconfigurableManufacturingEnterprises T.Masood,R.H.Weston ECONOMICSUSTAINABILITYFORMANUFACTURINGSYSTEMSANDPRODUCTS IntegratedEnvironmentalandEconomicAssessmentofProductionSystems A.Sproedt,J.Plehn,C.Schneider,P.Schönsleben
11 TowardsSustainableDevelopmentandSustainableProductioninFinnishManufacturingIndustry MikkoKoho,MikkoTapaninaho,SeppoTorvinen EmployeeParticipationintheImplementationofLeanProductionSystems U.Dombrowski;T.Mielke;S.Schulze ChallengesFacingManufacturingtoMovetowardsaGreenSocietywithCleanEnergyVehicles MasaruNakano QualitativeGrowthandSustainabilityinOrganizations AnOverview B.Seeberg,M.Monauni MANAGINGCOMPLEXITYOFPRODUCTS,PROCESSESANDMANUFACTURINGSYSTEMS EnablingCarBodyCustomizationthroughAutomotiveFramingSystemsDesign A.AlZaher,W.ElMaraghy,Z.J.Pasek PartsandAssemblyEquipmentComplexityDependencyMatrix S.N.Samy,H.ElMaraghy AnalysisofMarketDemandParametersfortheEvaluationofFlexibilityinFormingTechnology Avemann,J.;Schmitt,S.O.;Ederer,T.;Lorenz,U.;Groche,P. PRODUCTIONANDCOOPERATIONWITHINGLOBALNETWORK EnsuringHumanSafetywithOfflineSimulationandRealtimeWorkspaceSurveillanceforWeldingofAssemblies.465 C.Thomas,F.Busch,B.Kuhlenkoetter,J.Deuse AMethodforMultiScaleModelingofProductionSystems NeumannM.,ConstantinescuC.,WestkämperE. Efficientanalysis,handlinganduseofcustomercomplaints Effey,T.;Schmitt,R. Adaptive,LocationbasedShopFloorControl Reinhart,G.;Niehues,M.;Ostgathe,M. RelocationinProductionnetworksofaMultiNationalEnterprise Ponton,P.;Jaehne,M.;Mueller,E AModelingApproachtoAnalyzeRedundancyinManufacturingSystems K.Windt,M.T.Hütt,M.Meyer InfluenceoftheEuropeanEmissionsTradingSchemeonMROProvideroftheCivilAviationIndustry Tracht,K.;Funke,L.;Weikert,F DYNAMICANDGLOBALM NUFACTURINGCAPACITYANDCAPABILITIES ShiftingBottlenecksinProductionControl Schuh,G.;Potente,T.;Fuchs,S. SimulationBasedDetailedPlanningforAgileManufacturing BerendDenkena,LeifErikLorenzen,MaxKrüger,JustinSchmidt ProductVarietyManagementinDesignandManufacturing:ChallengesandStrategies TAlGeddawy,HElMaraghy CapabilityAssessmentandValuationoftheImplementationofLeanProductionMethods Lanza,G.,Jondral,A.,Book,J. PARTV: ENTERPRISEANDKNOWLEDGEMANAGEMENT MANUFACTUREANDORGANIZATIONALSTRUCTURES ANovelToolforAssessingandImprovingMaketoOrderandAssembletoOrderProductionSystems M.Koho,S.Torvinen ReferencePlanningProcessesforSeriesProduction N.Macke,S.Rulhoff,J.Stjepandic Theeffectofmanufacturingresponsetimeonmitigatingthedemandriskandfacilitydisruption Niroomand,I.;Baygi,M.B.;Kuzgunkaya,O.;Bulgak,A.A. TRANSFORMATIONANDCHANGEMANAGEMENT CladisticClassificationofAncientManufacturingFormsandTechnologies C. RoseAnderssen,J. Baldwin,K.Ridgway RealtimecapableProductionPlanningandControlintheOrderManagementofbuilttoorderCompanies G.Schuh,T.Brosze,S.Kompa,C.Meier Contents.. A
12 Contents CrosscompanycoordinationinBuilttoOrderProductionNetworksinMachineryandEquipmentIndustry V.Stich,C.Schmidt,C.Meier,S.Cuber,S.Kompa TypeOrientedFactoryPlanningwithSolutionSpaceManagement A.Kampker,B.Franzkoch,R.Hilchner OptimumRestorationoftheSharedPalletsDistributionAmongFactoriesandWarehouses TakafumiMatsuura,SatomiWada,KazumitiNumata AConsortiumLeveragedLearningNetwork V. Townsend,J.Urbanic ExtensionofValueStreamDesignfortheSimulationofAutonomousProductionSystems Theuer,H. BuildingBlocksinanExperimentalandDigitalFactory E.Müller,S.Horbach AnewApproachtoSimulationinProductionManagement Lass,S. COMPLEX/DYNAMICSUPPLYCHAINSANDLOGISTICS APlanningApproachforInplantMilkRunProcessestoOptimizeMaterialProvisioninAssemblySystems MarkusDroste,JochenDeuse ImpactofMachineDrivenCapacityConstellationsonPerformanceandDynamicsofJobShopSystems C.Toonen,D.Lappe,R.V.Donner,B.ScholzReiter OperatorSchedulingUndertheLeanManufacturingPrinciplesinOverSizeProductManufacturingFacilities KadirErtogral,AliAkgunduz KNOWLEDGEMANAGEMENTANDLEARNING TrainingconceptandstructureoftheLearningFactoryadvancedIndustrialEngineering Dinkelmann,M.;Riffelmacher,P.;Westkämper,E. SupportingProjectExecutionforAdaptableProductionSystemsusingaflexiblesoftwaretool E.Müller,U.Wagner Productionpilotforcooperationinfactorydevelopment D.Chen,T.Kjellberg,R.Svensson,G.Sivard SurrogateModellingasanEnablerforSelfOptimisationforProductionProcesses ReisgenU.,BeckersM.,BuchholzG.,WillmsK.,LoseJ.,Perge,J.,Schmitt,R. ApplicationProtocolsforStandardisingofProcessesandDatainDigitalManufacturing SchallowJ.,MagenheimerK.,DeuseJ.,ReinhartG. PartnerSelectioninInnovationAlliance Chen,X.;Riedel,R.;Mueller,E. HumanCentredModelforApplicationofLeanProductionSystemsinNetworks Uygun, Y.; Straub, N.
Design for Innovative Value Towards a Sustainable Society
Design for Innovative Value Towards a Sustainable Society Mitsutaka Matsumoto Yasushi Umeda Keijiro Masui Shinichi Fukushige Editors Design for Innovative Value Towards a Sustainable Society Proceedings
More informationDr. Hoda ElMaraghy Sample of Publications from past six (6) years
1 Book Publication: The outcome of several of Dr. ElMaraghy s research activities that were carried out as part of the CRC program was documented as a basis for a new reference book on Changeable and Reconfigurable
More informationHoda ElMaraghy Sample List of Publications
1 Book Publication: The outcome of several of Dr. ElMaraghy s research activities that were carried out as part of the CRC program was documented as a basis for a new reference book on Changeable and Reconfigurable
More informationSpringerBriefs in Space Development
SpringerBriefs in Space Development Guest Editor: Jinyuan Su More information about this series at http://www.springer.com/series/10058 Joseph N. Pelton New Solutions for the Space Debris Problem Joseph
More informationTechnology Roadmapping for Strategy and Innovation
Technology Roadmapping for Strategy and Innovation Martin G. Moehrle, Ralf Isenmann, and Robert Phaal (Eds.) Technology Roadmapping for Strategy and Innovation Charting the Route to Success ABC Editors
More informationFounding Editor Martin Campbell-Kelly, University of Warwick, Coventry, UK
History of Computing Founding Editor Martin Campbell-Kelly, University of Warwick, Coventry, UK Series Editor Gerard Alberts, University of Amsterdam, Amsterdam, The Netherlands Advisory Board Jack Copeland,
More informationICT for the Next Five Billion People
ICT for the Next Five Billion People Arnold Picot Josef Lorenz Editors ICT for the Next F Five Billion People Information and Communication for Sustainable Development Editors Prof. Dr. Dr. Arnold Picot
More informationMATLAB Guide to Finite Elements
MATLAB Guide to Finite Elements Peter I. Kattan MATLAB Guide to Finite Elements An Interactive Approach Second Edition With 108 Figures and 25 Tables Peter I. Kattan, PhD P.O. BOX 1392 Amman 11118 Jordan
More informationHealth Information Technology Standards. Series Editor: Tim Benson
Health Information Technology Standards Series Editor: Tim Benson Tim Benson Principles of Health Interoperability HL7 and SNOMED Second Edition Tim Benson Abies Ltd Hermitage, Thatcham Berkshire UK ISBN
More informationRisk-Based Ship Design
Risk-Based Ship Design Apostolos Papanikolaou (Ed.) Risk-Based Ship Design Methods, Tools and Applications Authored by Carlos Guedes Soares, Andrzej Jasionowski, Jørgen Jensen, Dag McGeorge, Apostolos
More informationApplied Technology and Innovation Management
Applied Technology and Innovation Management Heinrich Arnold Michael Erner Peter Möckel Christopher Schläffer Editors Applied Technology and Innovation Management Insights and Experiences from an Industry-Leading
More informationAdvances in Modern Tourism Research
Advances in Modern Tourism Research Álvaro Matias Peter Nijkamp Paulo Neto (Eds.) Advances in Modern Tourism Research Economic Perspectives With 26 Figures and 65 Tables Prof. Dr. Álvaro Matias University
More informationManagement of Recreation and Nature Based Tourism in European Forests
Management of Recreation and Nature Based Tourism in European Forests Ulrike Pröbstl Veronika Wirth Birgit Elands Simon Bell Editors Management of Recreation and Nature Based Tourism in European Forests
More informationModeling Manufacturing Systems. From Aggregate Planning to Real-Time Control
Modeling Manufacturing Systems From Aggregate Planning to Real-Time Control Springer-Verlag Berlin Heidelberg GmbH Paolo Brandimarte. Agostino Villa (Eds.) Modeling Manufacturing Systems From Aggregate
More informationRequirements Engineering for Digital Health
Requirements Engineering for Digital Health Samuel A. Fricker Christoph Thümmler Anastasius Gavras Editors Requirements Engineering for Digital Health Editors Samuel A. Fricker Blekinge Institute of Technology
More informationApplication of Evolutionary Algorithms for Multi-objective Optimization in VLSI and Embedded Systems
Application of Evolutionary Algorithms for Multi-objective Optimization in VLSI and Embedded Systems M.C. Bhuvaneswari Editor Application of Evolutionary Algorithms for Multi-objective Optimization in
More informationHandbook of Engineering Acoustics
Handbook of Engineering Acoustics . Gerhard M uller Michael M oser Editors Handbook of Engineering Acoustics Editors Prof. Dr. Gerhard M uller Technische Universit at M unchen Lehrstuhl f ur Baumechanik
More informationANALOG CIRCUITS AND SIGNAL PROCESSING
ANALOG CIRCUITS AND SIGNAL PROCESSING Series Editors Mohammed Ismail, The Ohio State University Mohamad Sawan, École Polytechnique de Montréal For further volumes: http://www.springer.com/series/7381 Yongjian
More informationScientific Data Mining and Knowledge Discovery
Scientific Data Mining and Knowledge Discovery Mohamed Medhat Gaber Editor Scientific Data Mining and Knowledge Discovery Principles and Foundations ABC Editor Mohamed Medhat Gaber Caulfield School of
More informationFuture-Oriented Technology Analysis
Future-Oriented Technology Analysis Cristiano Cagnin Michael Keenan Ron Johnston Fabiana Scapolo Rémi Barré Editors Future-Oriented Technology Analysis Strategic Intelligence for an Innovative Economy
More informationCommunications in Computer and Information Science 85
Communications in Computer and Information Science 85 Albert Fleischmann Detlef Seese Christian Stary (Eds.) S-BPM ONE Setting the Stage for Subject-Oriented Business Process Management First International
More informationThe Future of Civil Litigation
The Future of Civil Litigation ThiS is a FM Blank Page Laura Ervo Editors The Future of Civil Litigation Access to Courts and Court-annexed Mediation in the Nordic Countries Editors Laura Ervo JPS University
More informationBroadband Networks, Smart Grids and Climate Change
Broadband Networks, Smart Grids and Climate Change Eli M. Noam Lorenzo Maria Pupillo Johann J. Kranz Editors Broadband Networks, Smart Grids and Climate Change Editors Eli M. Noam Columbia Business School
More informationTullio TOLIO - Politecnico di Milano Department of Mechanical Engineering. Opening, welcome, introduction of invited guests. Approval of the agenda
2005 TT Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering Meeting Opening Opening, welcome, introduction of invited guests Approval of the agenda Approval of the minutes Organized
More informationDao Companion to the Analects
Dao Companion to the Analects Dao Companions to Chinese Philosophy Series Editor HUANG Yong Department of Philosophy The Chinese University of Hong Kong Shatin, New Territories Hong Kong E-mail: yonghuang@cuhk.edu.hk
More informationSpringerBriefs in Space Development
SpringerBriefs in Space Development Series Editor: Joseph N. Pelton, Jr. For further volumes: http://www.springer.com/series/10058 Audrey L. Allison The ITU and Managing Satellite Orbital and Spectrum
More informationArchitecture Design and Validation Methods
Architecture Design and Validation Methods Springer-Verlag Berlin Heidelberg GmbH Egon Börger (Ed.) Architecture Design and Validation Methods With 175 Figures, Springer Editor Prof. Dr. Egon Börger Universita
More informationSimulation by Bondgraphs
Jean U. Thoma Simulation by Bondgraphs Introduction to a Graphical Method Springer-Verlag Berlin Heidelberg New York London Paris Tokyo Hong Kong 1990 Professor Dr. Jean Ulrich Thoma Dept. of Mechanical
More informationCOOP 2016: Proceedings of the 12th International Conference on the Design of Cooperative Systems, May 2016, Trento, Italy
Antonella De Angeli Liam Bannon Patrizia Marti Silvia Bordin Editors COOP 2016: Proceedings of the 12th International Conference on the Design of Cooperative Systems, 23-27 May 2016, Trento, Italy COOP
More informationAdvances in Metaheuristic Algorithms for Optimal Design of Structures
Advances in Metaheuristic Algorithms for Optimal Design of Structures ThiS is a FM Blank Page A. Kaveh Advances in Metaheuristic Algorithms for Optimal Design of Structures A. Kaveh School of Civil Engineering,
More informationTECHNOLOGY, INNOVATION, and POLICY 3. Series of the Fraunhofer Institute for Systems and Innovation Research (lsi)
TECHNOLOGY, INNOVATION, and POLICY 3 Series of the Fraunhofer Institute for Systems and Innovation Research (lsi) Guido Reger Ulrich Schmoch (Eds.) Organisation of Science and Technology at the Watershed
More informationSpringer Series on. Signals and Communication Technology
Springer Series on Signals and Communication Technology Signals and Communication Technology Functional Structures in Networks AMLn A Language for Model Driven Development of Telecom Systems T. Muth ISBN
More informationStraBer Wahl Graphics and Robotics
StraBer Wahl Graphics and Robotics Wolfgang StrafSer Friedrich Wahl Editors Graphics and Robotics With 128 Figures, some in Colour, Springer Prof. Dr.-lng. Wolfgang StraBer Wilhelm-Schickard-lnstitut fur
More informationComputer-Aided Production Management
Asbj0rn Rolstadas (Ed.) Computer-Aided Production Management With 169 Figures Springer-Verlag Berlin Heidelberg New York London Paris Tokyo Professor Dr. Asbjern Ro1stadas Production Engineering Laboratory
More informationDry Etching Technology for Semiconductors. Translation supervised by Kazuo Nojiri Translation by Yuki Ikezi
Dry Etching Technology for Semiconductors Translation supervised by Kazuo Nojiri Translation by Yuki Ikezi Kazuo Nojiri Dry Etching Technology for Semiconductors Kazuo Nojiri Lam Research Co., Ltd. Tokyo,
More informationMatthias Pilz Susanne Berger Roy Canning (Eds.) Fit for Business. Pre-Vocational Education in European Schools RESEARCH
Fit for Business Matthias Pilz Susanne Berger Roy Canning (Eds.) Fit for Business Pre-Vocational Education in European Schools RESEARCH Editors Matthias Pilz, Susanne Berger, Cologne, Germany Roy Canning
More informationLecture Notes in Computer Science Edited by G. Goos, J. Hartmanis and J. van Leeuwen
Lecture Notes in Computer Science 1528 Edited by G. Goos, J. Hartmanis and J. van Leeuwen 3 Berlin Heidelberg New York Barcelona Hong Kong London Milan Paris Singapore Tokyo Bart Preneel Vincent Rijmen
More informationLecture Notes in Artificial Intelligence. Lecture Notes in Computer Science
Lecture Notes in Artificial Intelligence 897 Subseries of Lecture Notes in Computer Science Edited by J. G. Carbonell and J. Siekmann Lecture Notes in Computer Science Edited by G. Goos, J. Hartmanis and
More informationData Assimilation: Tools for Modelling the Ocean in a Global Change Perspective
Data Assimilation: Tools for Modelling the Ocean in a Global Change Perspective NATO ASI Series Advanced Science Institutes Series A series presenting the results of activities sponsored by the NA TO Science
More informationAdvances in Computer Vision and Pattern Recognition
Advances in Computer Vision and Pattern Recognition For further volumes: http://www.springer.com/series/4205 Marco Alexander Treiber Optimization for Computer Vision An Introduction to Core Concepts and
More informationZEW Economic Studies. Publication Series of the Centre for European Economic Research (ZEW), Mannheim, Germany
ZEW Economic Studies Publication Series of the Centre for European Economic Research (ZEW), Mannheim, Germany ZEW Economic Studies Vol. 1: O. Hohmeyer, K. Rennings (Eds.) Man-Made Climate Change Economic
More informationBetter Business Regulation in a Risk Society
Better Business Regulation in a Risk Society Alberto Alemanno Frank den Butter André Nijsen Jacopo Torriti Editors Better Business Regulation in a Risk Society Editors Alberto Alemanno Department of Law
More informationSustainable Development
Sustainable Development Anne E. Egelston Sustainable Development A History 123 Dr. Anne E. Egelston Government Department Lone Star College-Montgomery Conroe, TX 77384 USA Quotations from Reimann (2006)
More informationIntroduction to Computational Optimization Models for Production Planning in a Supply Chain
Introduction to Computational Optimization Models for Production Planning in a Supply Chain Stefan Voß David L.Woodruff Introduction to Computational Optimization Models for Production Planning in a Supply
More informationU. Lindemann (Ed.) Human Behaviour in Design
U. Lindemann (Ed.) Human Behaviour in Design Springer-Verlag Berlin Heidelberg GmbH Engineering ONLINE LIBRARY http://www.springer.de/engine/ Udo Lindemann (Ed.) Human Behaviour in Design Individuals,
More informationCognitive Systems Monographs
Cognitive Systems Monographs Volume 9 Editors: Rüdiger Dillmann Yoshihiko Nakamura Stefan Schaal David Vernon Heiko Hamann Space-Time Continuous Models of Swarm Robotic Systems Supporting Global-to-Local
More informationLecture Notes in Computer Science. Edited by G. Goos, J. Hartmanis and J. van Leeuwen
Lecture Notes in Computer Science Edited by G. Goos, J. Hartmanis and J. van Leeuwen 1487 Volker Gruhn (Ed.) Software Process Technology 6th European Workshop, EWSPT '98 Weybridge, UK, September 16-18,
More informationFoundations in Signal Processing, Communications and Networking
Foundations in Signal Processing, Communications and Networking Series Editors: W. Utschick, H. Boche, R. Mathar For other titles published in this series, go to www.springer.com/series/7603 Meik Dörpinghaus
More informationInnovation Policy in a Knowledge-Based Economy
Innovation Policy in a Knowledge-Based Economy Patrick Llerena Mireille Matt Editors Innovation Policy in a Knowledge-Based Economy Theory and Practice With Contributions by Arman Avadikyan Laurent Bach
More informationStudies in Economic Ethics and Philosophy
Studies in Economic Ethics and Philosophy Series Editor Peter Koslowski Editorial Board F. Neil Brady George Brenkert Geoffrey Brennan James M. Buchanan Thomas Donaldson Richard De George Jon Elster Amitai
More informationHierarchy Process. The Analytic. Bruce L. Golden Edward A. Wasil Patrick T. Harker (Eds.) Applications and Studies
Bruce L. Golden Edward A. Wasil Patrick T. Harker (Eds.) The Analytic Hierarchy Process Applications and Studies With Contributions by 1. M. Alexander, W D. Daniel Jr., 1. G. Dolan, L. P. Fatti, B. L.
More informationAcoustic Emission Testing
Acoustic Emission Testing Christian U. Grosse (Eds.) Acoustic Emission Testing 123 Christian U. Grosse Department of Non-destructive Testing and Monitoring Techniques Material Testing Institute MPA University
More informationDrones and Unmanned Aerial Systems
Drones and Unmanned Aerial Systems Aleš Završnik Editor Drones and Unmanned Aerial Systems Legal and Social Implications for Security and Surveillance 2123 Editor Aleš Završnik Institute of Criminology
More informationActive Perception in the History of Philosophy
Active Perception in the History of Philosophy Studies in the History of Philosophy of Mind Valume 14 Editors Henrik Lagerlund, The University of Western Ontario, Canada Mikko Yrjönsuuri, Academy of Finland
More informationComputer Supported Cooperative Work. Series Editor Richard Harper Cambridge, United Kingdom
Computer Supported Cooperative Work Series Editor Richard Harper Cambridge, United Kingdom The CSCW series examines the dynamic interface of human nature, culture, and technology. Technology to support
More informationHuman-Computer Interaction Series
Human-Computer Interaction Series Editors-in-Chief John Karat Jean Vanderdonckt, Université Catholique de Louvain, Belgium Editorial Board Simone Barbosa, PUC-Rio, Brazil Gaëlle Calvary, LIG-University
More informationFaster than Nyquist Signaling
Faster than Nyquist Signaling Deepak Dasalukunte Viktor Öwall Fredrik Rusek John B. Anderson Faster than Nyquist Signaling Algorithms to Silicon 123 Deepak Dasalukunte Lantiq Bangalore, India Fredrik
More informationAdvances in Real-Time Systems
Advances in Real-Time Systems Samarjit Chakraborty Jörg Eberspächer Editors Advances in Real-Time Systems 123 Editors Samarjit Chakraborty TU München LS für RealzeitComputersysteme Arcisstr. 21 80290
More informationSpringerBriefs in Computer Science
SpringerBriefs in Computer Science Series Editors Stan Zdonik Shashi Shekhar Jonathan Katz Xindong Wu Lakhmi C. Jain David Padua Xuemin (Sherman) Shen Borko Furht V.S. Subrahmanian Martial Hebert Katsushi
More informationLecture Notes in Applied and Computational Mechanics
Lecture Notes in Applied and Computational Mechanics Volume 28 Series Editors Prof. Dr.-Ing. Friedrich Pfeiffer Prof. Dr.-Ing. Peter Wriggers Lecture Notes in Applied and Computational Mechanics Edited
More informationManagement of Software Engineering Innovation in Japan
Management of Software Engineering Innovation in Japan Yasuo Kadono Management of Software Engineering Innovation in Japan 1 3 Yasuo Kadono Ritsumeikan University Graduate School of Technology Management
More informationLecture Notes in Computational Science and Engineering 68
Lecture Notes in Computational Science and Engineering 68 Editors Timothy J. Barth Michael Griebel David E. Keyes Risto M. Nieminen Dirk Roose Tamar Schlick Sidney Yip Tomás Diaz de la Rubia Editors Scientific
More informationSurface Mining Machines
Surface Mining Machines Eugeniusz Rusiński Jerzy Czmochowski Przemysław Moczko Damian Pietrusiak Surface Mining Machines Problems of Maintenance and Modernization 123 Eugeniusz Rusiński Faculty of Mechanical
More informationStudies in Empirical Economics
Studies in Empirical Economics Aman Ullah (Ed.) Semiparametric and Nonparametric Econometrics 1989. VII, 172 pp. Hard cover DM 120, ISBN 3-7908-0418-5 Walter Kramer (Ed.) Econometrics of Structural Change
More informationSocio-technical Design of Ubiquitous Computing Systems
Socio-technical Design of Ubiquitous Computing Systems Klaus David Kurt Geihs Jan Marco Leimeister Alexander Roßnagel Ludger Schmidt Gerd Stumme Arno Wacker Editors Socio-technical Design of Ubiquitous
More informationLecture Notes in Computer Science
Lecture Notes in Computer Science Edited by G. Goos, J. Hartmanis and J. van Leeuwen 968 Advisory Board: W. Brauer D. Gries J. Stoer Nachum Dershowitz Naomi Lindenstrauss (Eds.) Conditional and Typed Rewriting
More informationComputational Intelligence for Network Structure Analytics
Computational Intelligence for Network Structure Analytics Maoguo Gong Qing Cai Lijia Ma Shanfeng Wang Yu Lei Computational Intelligence for Network Structure Analytics 123 Maoguo Gong Xidian University
More informationInnovations and the Environment
Innovations and the Environment Yoram Krozer Innovations and the Environment 123 Yoram Krozer, PhD Cartesius Institute Institute for Sustainable Innovations of the Netherlands Technical Universities Zuidergrachtswal
More informationStatistics and Computing Series Editors: J. Chambers D. Hand W. Härdle
Statistics and Computing Series Editors: J. Chambers D. Hand W. Härdle For other titles published in this series, go to http://www.springer.com/series/3022 Roberto Baragona Francesco Battaglia Irene Poli
More informationLecture Notes in Computer Science 2006 Edited by G. Goos, J. Hartmanis and J. van Leeuwen
Lecture Notes in Computer Science 2006 Edited by G. Goos, J. Hartmanis and J. van Leeuwen 3 Berlin Heidelberg New York Barcelona Hong Kong London Milan Paris Singapore Tokyo Reiner Dumke Alain Abran (Eds.)
More informationDynamics of Fibre Formation and Processing
Dynamics of Fibre Formation and Processing Roland Beyreuther Harald Brünig Dynamics of Fibre Formation and Processing Modelling and Application in Fibre and Textile Industry With 171 Figures 123 Prof.
More informationGrid and Cloud Computing
Grid and Cloud Computing Katarina Stanoevska-Slabeva Thomas Wozniak Santi Ristol Editors Grid and Cloud Computing A Business Perspective on Technology and Applications Editors Prof. Dr. Katarina Stanoevska-Slabeva
More informationResearch and Practice on the Theory of Inventive Problem Solving (TRIZ)
Research and Practice on the Theory of Inventive Problem Solving (TRIZ) ThiS is a FM Blank Page Leonid Chechurin Editor Research and Practice on the Theory of Inventive Problem Solving (TRIZ) Linking Creativity,
More informationNeutron Scattering Applications and Techniques
Neutron Scattering Applications and Techniques Series editors Ian S. Anderson, Oak Ridge National Laboratory, Oak Ridge, TN, USA Alan J. Hurd, Los Alamos National Laboratory, Los Alamos, NM, USA Robert
More information3 Forensic Science Progress
3 Forensic Science Progress Forensic Science Progress Volume 3 With Contributions by C. A. Pounds, R. N. Smith With 19 Figures and 7 Tables Springer-Verlag Berlin Heidelberg New York London Paris Tokyo
More informationAdvanced Electronic Circuits
U. Tietze Ch. Schenk Advanced Electronic Circuits Wi th the Assistance of E. Schmid With 570 Figures Springer-Verlag Berlin Heidelberg New York 1978 Dr.-Ing. Ulrich Tietze Dr.-Ing. Christoph Schenk Universitat
More informationLecture Notes in Business Information Processing 326
Lecture Notes in Business Information Processing 326 Series Editors Wil M. P. van der Aalst RWTH Aachen University, Aachen, Germany John Mylopoulos University of Trento, Trento, Italy Michael Rosemann
More informationExplaining Technical Change in a Small Country. The Finnish National Innovation System
Explaining Technical Change in a Small Country The Finnish National Innovation System ETLA - The Research Institute of the Finnish Economy Series B84 The Research Institute ofthe Finnish Economy (ETLA)
More informationLecture Notes in Computer Science
Lecture Notes in Computer Science Edited by G. Goos and J. Hartmanis 772 Advisory Board: W. Brauer D. Giles J. Stoer Brian C. Warboys (Ed.) Software Process Technology Third European Workshop, EWSPT '94
More informationIntroduction to Fuzzy Logic using MATLAB
Introduction to Fuzzy Logic using MATLAB S. N. Sivanandam, S. Sumathi and S. N. Deepa Introduction to Fuzzy Logic using MATLAB With 304 Figures and 37 Tables 123 Dr. S.N. Sivanandam S. N. Deepa Professor
More informationHealth Informatics. For further volumes:
Health Informatics For further volumes: http://www.springer.com/series/1114 ThiS is a FM Blank Page Alain Venot Anita Burgun Catherine Quantin Editors Medical Informatics, e-health Fundamentals and Applications
More informationOffshore Energy Structures
Offshore Energy Structures Madjid Karimirad Offshore Energy Structures For Wind Power, Wave Energy and Hybrid Marine Platforms 1 3 ISBN 978-3-319-12174-1 ISBN 978-3-319-12175-8 (ebook) DOI 10.1007/978-3-319-12175-8
More informationStudies in Computational Intelligence
Studies in Computational Intelligence Volume 733 Series editor Janusz Kacprzyk, Polish Academy of Sciences, Warsaw, Poland e-mail: kacprzyk@ibspan.waw.pl About this Series The series Studies in Computational
More information2 Forensic Science Progress
2 Forensic Science Progress Forensic Science Progress Volume 2 With Contributions by G. Hellmiss, J. Mathyer, B. Miyake, H. Sato, S. Seta With 58 Figures and 36 Tables Springer-Verlag Berlin Heidelberg
More informationCross-Industry Innovation Processes
Cross-Industry Innovation Processes Tobias Hahn Cross-Industry Innovation Processes Strategic Implications for Telecommunication Companies Preface by Prof. Dr. Rüdiger Zarnekow Tobias Hahn Bonn, Germany
More informationSpringerBriefs in Astronomy
SpringerBriefs in Astronomy Series editors Martin Ratcliffe Valley Center, Kansas, USA Wolfgang Hillebrandt MPI für Astrophysik, Garching, Germany Michael Inglis Suffolk County Community College, New York,
More informationCurrent Technologies in Vehicular Communications
Current Technologies in Vehicular Communications George Dimitrakopoulos George Bravos Current Technologies in Vehicular Communications George Dimitrakopoulos Department of Informatics and Telematics Harokopio
More informationThe Cultural and Social Foundations of Education. Series Editor A.G. Rud College of Education Washington State University USA
The Cultural and Social Foundations of Education Series Editor A.G. Rud College of Education Washington State University USA The Palgrave Pivot series on the Cultural and Social Foundations of Education
More informationVariation Tolerant On-Chip Interconnects
Variation Tolerant On-Chip Interconnects ANALOG CIRCUITS AND SIGNAL PROCESSING Series Editors: Mohammed Ismail. The Ohio State University Mohamad Sawan. École Polytechnique de Montréal For further volumes:
More informationLecture Notes in Control and Information Sciences 283. Editors: M. Thoma M. Morari
Lecture Notes in Control and Information Sciences 283 Editors: M. Thoma M. Morari Springer Berlin Heidelberg NewYork Barcelona Hong Kong London Milan Paris Tokyo Christopher Fielding, Andras Varga, Samir
More informationManagement and Industrial Engineering. Series editor J. Paulo Davim, Aveiro, Portugal
Management and Industrial Engineering Series editor J. Paulo Davim, Aveiro, Portugal More information about this series at http://www.springer.com/series/11690 J. Paulo Davim Editor Progress in Lean Manufacturing
More informationLecture Notes in Control and Information Sciences
Lecture Notes in Control and Information Sciences Edited by M.Thoma and A.Wyner 167 M. Rao Integrated System for Intelligent Control Springer-Verlag Berlin Heidelberg NewYork London Paris Tokyo Hong Kong
More informationThe Test and Launch Control Technology for Launch Vehicles
The Test and Launch Control Technology for Launch Vehicles Zhengyu Song The Test and Launch Control Technology for Launch Vehicles 123 Zhengyu Song China Academy of Launch Vehicle Technology Beijing China
More informationLecture Notes in Computer Science 2599 Edited by G. Goos, J. Hartmanis, and J. van Leeuwen
Lecture Notes in Computer Science 2599 Edited by G. Goos, J. Hartmanis, and J. van Leeuwen 3 Berlin Heidelberg New York Barcelona Hong Kong London Milan Paris Tokyo Edel Sherratt (Ed.) Telecommunications
More informationLecture Notes in Computer Science
Lecture Notes in Computer Science Edited by G. Goos, J. Hartmanis and J. van Leeuwen 1007 Advisory Board: W. Brauer D. Gries J. Stoer Antoon Bosselaers Bart Preneel (Eds.) Integrity Primitives for Secure
More informationAdvanced Information and Knowledge Processing
Advanced Information and Knowledge Processing Series Editors Professor Lakhmi Jain Lakhmi.jain@unisa.edu.au Professor Xindong Wu xwu@cems.uvm.edu For further volumes: http://www.springer.com/series/4738
More informationPierre-Yves Henin (Ed.) Advances in Business Cycle Research
Pierre-Yves Henin (Ed.) Advances in Business Cycle Research Springer-V erlag Berlin Heidelberg GmbH Pierre-Yves Henin (Ed.) Advances in Business Cycle Research With Application to the French and US Economies
More informationFront Digital page Strategy and leadership
Front Digital page Strategy and leadership Who am I? Prof. Dr. Bob de Wit What concerns me? - How to best lead a firm - How to design the strategy process - How to best govern a country - How to adapt
More informationLiM - Lasers in Manufacturing 2011 Part 1
M. Schmidt, M. F. Zaeh, T. Graf, A. Ostendorf LiM - Lasers in Manufacturing 2011 Part 1 Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing Munich, Germany May 23-26, 2011
More informationFront Digital page Strategy and Leadership
Front Digital page Strategy and Leadership Who am I? Prof. Dr. Bob de Wit What concerns me? - How to best lead a firm - How to design the strategy process - How to best govern a country - How to adapt
More information