Dr. Hoda ElMaraghy Sample of Publications from past six (6) years
|
|
- Egbert Roberts
- 5 years ago
- Views:
Transcription
1 1 Book Publication: The outcome of several of Dr. ElMaraghy s research activities that were carried out as part of the CRC program was documented as a basis for a new reference book on Changeable and Reconfigurable Manufacturing Systems. Professor ElMaraghy is both a major Contributing Author (9 chapters out of 22) as well as the Editor of this book published by Springer-Verlag. This book discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. It presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. This book is a comprehensive reference for professional engineers, and academics in manufacturing, industrial and mechanical engineering. ( 2 Recent Books Edited: ElMaraghy, H.A. (Editor), 2014, Proceedings of the 6 th CIRP Conference on Industrial Product- Service Systems, SI Procedia CIRP, Volume 16, Elsevier (Pbl.). ElMaraghy, H.A. (Editor), 2014, Proceedings of the 47 th CIRP Conference on Managing Variety in Manufacturing, SI Procedia CIRP, Volume 17, Elsevier (Pbl.). ElMaraghy, H.A. (Editor & Author), 2011, Enabling Manufacturing Competitiveness and Economic Sustainability, Springer-Verlag Publ., 665 pages, ISBN , ElMaraghy, H.A. (Editor & Contributor), 2009, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , 435 pages, 185 illustrations. 3 Recent Contributions to Books: ElMaraghy, H., AlGeddawy, T., 2013, Multidisciplinary Domains Association in Product Family Design, Chapter 3, Advances in Product Family and Product Platform Design: Methods & Applications, T.W. Simpson et al (eds.), Springer (Publ.), DOI: / _3, pp ElMaraghy, H., and AlGeddawy, T., 2013, Cladistics for Products and Manufacturing, In: Laperriere L., Reinhart G. (Ed.) Encyclopedia (Cirpedia) of Production Engineering: Springer Reference ( Springer-Verlag Berlin Heidelberg. DOI: Tolio, T., ElMaraghy, H. and Valente, A., 2013, Co-Evolution of Manufacturing Systems, In: Laperriere L., Reinhart G. (Ed.) Encyclopedia (Cirpedia) of Production Engineering: Springer Reference ( Springer-Verlag Berlin Heidelberg. DOI: ElMaraghy, H. and Nassehi, Aydin, 2013, Computer-Aided Process Planning (CAPP), In: Laperriere L., Reinhart G. (Ed.) Encyclopedia (Cirpedia) of Production Engineering: Springer Page 1 of 9
2 Reference ( Springer-Verlag Berlin Heidelberg. DOI: ElMaraghy, H. and Hans-Peter Wiendahl, H.P., 2013, Changeable Manufacturing, In: Laperriere L., Reinhart G. (Ed.) Encyclopedia (Cirpedia) of Production Engineering: Springer Reference ( Springer-Verlag Berlin Heidelberg. DOI: ElMaraghy, H. and Deif, A., 2013, Capacity Planning, In: Laperriere L., Reinhart G. (Ed.) Encyclopedia (Cirpedia) of Production Engineering: Springer Reference ( Springer-Verlag Berlin Heidelberg. DOI: /SpringerReference_ :52:09 ElMaraghy, H., Caggiano, A., 2012, Flexible Manufacturing System (FMS), In: Laperriere L., Reinhart G. (Ed.) Encyclopedia (Cirpedia) of Production Engineering: Springer Reference ( Springer-Verlag Berlin Heidelberg., 1. DOI: ElMaraghy, H., Wiendahl, H.P., 2009, Changeability An Introduction, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , pp ElMaraghy, H., 2009, Changing and Evolving Products and Systems Models and Enablers, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , pp Ismail, M., ElMaraghy, H., 2009, Component Oriented Design of Change Ready MPC System, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , pp Deif, A., ElMaraghy, H., 2009, Dynamic Capacity Planning and Modeling its Complexity, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , pp Kuzgunkaya, O., ElMaraghy, H., 2009, Economic and Strategic Justification of Changeable, Reconfigurable and Flexible Manufacturing, Changeable and Reconfigurable Manufacturing Systems, Springer-Verlag Publishers, ISBN: , pp ElMaraghy, H.A., Reconfigurable Process Plans for Responsive Manufacturing Systems, 2007, Digital Enterprise Technology: Perspectives & Future Challenges, Editors: P.F. Cunha and P.G. Maropoulos, Springer Science, ISBN: , pp Recent Keynote Papers: ElMaraghy, H., ElMaraghy, W., 2014 Learning Factories for Manufacturing Systems, 4 th Conference on Learning Factories, Royal Swedish Academy of Sciences (IVA) and KTH, Stockholm, Sweden, May. ElMaraghy, H., ElMaraghy, W., 2014 Learning Factories for Smart Manufacturing, 8 th International Conference on Digital Enterprise Technology (DET2014), Stuttgart, Germany, May. ElMaraghy, W., ElMaraghy, H., 2014, A New Engineering Design Paradigm The Quadruple Bottom Line, 24 th CIRP Design Conference, Milan, Italy, April. Page 2 of 9
3 ElMaraghy, W., ElMaraghy, H., 2013 Complex Cyber-Physical Systems for Wealth Creation, 40 th Annual International Conference on the Association of Egyptian American Scholars, Abu Qir Alexandria, Egypt, Dec. ElMaraghy, W., ElMaraghy, H, 2013 Complex Cyber-Physical Systems for Wealth Creation, 3 rd International Conference on ICT in our lives, Information Systems Serving the Community, Alexandria, Egypt, Dec. ElMaraghy, H., ElMaraghy, W., 2013, Variety, Complexity and Value Creation, 5 th Int. Conf. on Changeable, Agile, Reconfiguration and Virtual Production (CARV2013), Munich, Germany, 6-9 October. Putnik, G., Sluga, A., ElMaraghy, H., Teti, R., Koren, Y., Tolio, T., Hon, B., 2013, Scalability In Manufacturing Systems Design and Operation: State-Of-The-Art and Future Developments Roadmap, Keynote Paper, CIRP General Assembly, Copenhagen, Denmark, August. ElMaraghy, H., Schuh, G., ElMaraghy, W., Piller, F., Schönsleben, P.,Tseng, M., Bernard, A., 2013, Product Variety Management, Keynote Paper, CIRP General Assembly, Copenhagen, Denmark, August. Leu, M.C., Hoda A. ElMaraghy, Andrew Y. C. Nee, Soh Khim Ong, Michele Lanzetta, Matthias Putz, Wenjuan Zhu, Alain Bernard, 2013, CAD Model-Based Virtual Assembly Simulation, Planning And Training, Keynote Paper, CIRP General Assembly, Copenhagen, Denmark, August. ElMaraghy, H., 2012, Manufacturing in the Age of Variety Challenges and Opportunities, Mechanical and Industrial Engineering (MIE) Seminar Series, Concordia University, Montreal, Canada, 4 December. ElMaraghy, H, Change in Manufacturing: Products, Manufacturing Systems and Education Challenges, 1st Joint Symposium on System-integrated Intelligence, June 27 29, 2012, Hannover, Germany ElMaraghy, W., ElMaraghy, H., Tomiyama, T. and Monostori, L., 2012, Complexity In Engineering Design and Manufacturing, CIRP Annals Manufacturing Technology, Vol. 61/2. DOI: /J.CIRP Hong Kong August, 2012 ElMaraghy, H., 2012, Variety In Design And Manufacturing Challenges And Opportunities, 12th International Conference on CAD (CAD12), June 11-14, 2012, Niagara Falls, Ontario ElMaraghy, H., ElMaraghy, W., 2012, Variety and Complexity of products and Manufacturing Systems, ASME th Biennial Conference On Engineering Systems Design And Analysis (ESDA2012), July 2-4, Nantes, France. ElMaraghy, H., AlGeddawy, T., Azab, A. and ElMaraghy, W. (2011) Change in Manufacturing - Research and Industrial Challenge. Keynote Paper, Proceeding of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV2011), Montreal, pp 2-9. S.J. Hu, J. Ko, L. Weyand, H.A. ElMaraghy, T.K. Lien, Y. Koren, H. Bley, G. Chryssolouris, N. Nasr, M. Shpitalni, 2011, Assembly System Design and Operations for Product Variety, CIRP Annals, Vol. 60/2 ElMaraghy, H.A, 2010, Manufacturing Success in the Age of Variation, 1st Competitive Sustainable Manufacturing Forum Seminar, Vapriikki, Tampere, Finland, 4August. ElMaraghy, H.A., 2010, Evolution Inspired Sustainability and Variety Management in Manufacturing Systems, Stuttgart Competence Forum: Intelligent Production Systems of the Future, Stuttgart, Germany, 4 November. Page 3 of 9
4 ElMaraghy, H.A., 2010, Manufacturing Systems Sustainability Through Perfect Co-evolution with Products, Keynote Paper, 43rd CIRP International Conference of Manufacturing Systems (ICMS), Vienna, Austria, May. pp ElMaraghy, H.A., 2009, Manufacturing Success in the Age of Variation, Keynote Paper, 3rd Conference on Changeable, Agile, Reconfigurable & Virtual Production (CARV), Munich, Germany, 5-7 October ElMaraghy, H.A., 2008, Manufacturing In High Cost Countries, Invited Keynote Paper, Center for Research-based Innovation Norway Manufacturing Program (SFI/NORMAN) International Workshop on Responsive Manufacturing, and Panelist on: Customized, Reconfigurable, Adaptive and Robust Manufacturing Processes, 3 & 4 November 2008, Trondheim, Norway. 5 Recent Full Papers in REFEREED JOURNALS: Seleim, A., ElMaraghy, H., 2014, Generating Max-Plus Equations for Efficient Analysis of Manufacturing Flow Lines, J. of Manufacturing Systems (JMS), DOI: /j.jmsy , (In Press). Hanafy, M., ElMaraghy, H., 2014, A Modular Product Multi Platform Configuration Model, Int. J. of Computer Integrated Mfg, (IJCIM), DOI: / X Deif, A., ElMaraghy, H., 2014, Cost Performance Dynamics in Lean Production Leveling, J. of Mfg Syst. (JMS), SMEJMS-D , DOI: /j.jmsy (In Press). ElMaraghy, H., Deif., A., 2014, Dynamic Modeling of Impact of Lean Policies on Production Leveling Feasibility, CIRP Annals Manufacturing Technology (2014), Vol. 63, Iss. 1, pp Kashkoush, M., ElMaraghy, H., 2014, Consensus Tree Method for Generating Master Assembly Sequence, (Springer) J., of Prod. Eng. Res. Devel., DOI: /s , Vol. 8, pp Roshanaei, V., Azab, A. and ElMaraghy, H., V., 2013, Mathematical Modeling and Metaheuristics for Flexible Job Shop Scheduling, Int. J. Of Production Research, TPRS-2012-IJPR-0976.R2, pp ElMaraghy, H., AlGeddawy, T., Samys, S.N., Espinonza, V., 2013, A Model for Assessing the Layout Structural Complexity of Manufacturing Systems, Journal of Manufacturing Systems, DOI: /j.jmsy , Vol. 33, Iss. 1, pp Putnik, G., Sluga, A., ElMaraghy, H., Teti, R., Koren, Y., Tolio, T., Hon, B., 2013, Scalability in manufacturing systems design and operation: State-of-the-art and future developments roadmap, CIRP Annals Manufacturing Technology, Vol. 62/2, pp ElMaraghy, H., Schuh, G., ElMaraghy, W., Piller, F., Schönsleben, P., Tseng, M., Bernard, A., 2013, Product Variety Management, CIRP Annals Manufacturing Technology, Vol. 62/2, pp Leu, M.C., ElMaraghy, H., Nee, A., Ong, S., Lanzetta, M., Putz, M., Zhu, W., Bernard, A., 2013, CAD Model-Based Virtual Assembly Simulation, Planning And Training, CIRP Annals - Manufacturing Technology, Vol. 62/2, pp AlGeddawy, T., and ElMaraghy, H., 2013, Optimum Granularity of Modular Product Design Architecture, CIRP Annals Manufacturing technology, Vol. 62/1, pp , DOI: j.cirp Azab, A., ElMaraghy, H., Nyhuis, P., Pachow-Frauenhofer, J. and Schmidt, M., 2013, Mechanics of change: A Framework To Reconfigure Manufacturing Systems, CIRP Journal of Manufacturing Science and Technology, 6 (2), pp DOI: /J.CIRPJ Page 4 of 9
5 AlGeddawy, T. and ElMaraghy, H., 2013, Reactive Design Methodology for Product Family Platform, Modularity and Parts Integration. CIRP Journal of Manufacturing Science and Technology, 6 (1), pp DOI: /j.cirpj S.N. Samy, H. ElMaraghy, A model for measuring complexity automated and hybrid assembly systems, The Int. Journal of Advanced Manufacturing Technology. Published online: 11 January 2012, DOI /s y. pp ElMaraghy, W., ElMaraghy, H., Tomiyama, T. and Monostori, L., 2012, Complexity In Engineering Design and Manufacturing, Keynote Paper, CIRP Annals Manufacturing Technology, Vol. 61/2, DOI: /J.CIRP Samy, S.N. and ElMaraghy, H., 2012, Complexity Mapping of the Product and Assembly System, Assembly Automation Journal, Vol. 32, Iss: 2. pp ElMaraghy, H. and AlGeddawy, T., 2012, New Dependency Model and Biolgical Analogy for Integrating Product Design for Variety with Market Requirements, Journal of Engineering Design, Special Issue on Dependency Modelling in Complex System Design,, CJEN R4. In print. ElMaraghy, H.A., AlGeddawy, T., 2012, Co-evolution of Products and Manufacturing Capabilities and Application in Automotive Assembly, Flexible Services and Manufacturing Journal (FSMJ), Vol 24, Iss:2, PP , DOI: /s AlGeddawy, T. and ElMaraghy, H., 2011, Reactive Design Methodology for Product Family Platform, Modularity and Parts Integration. CIRP Journal of Manufacturing Science and Technology. Submitted 12Oct2011, CIRPJ-S In review AlGeddawy, T. and ElMaraghy, H., 2011, A Co-evolution Model for Prediction and Synthesis of New products and Manufacturing Systems, ASME Journal of Mechanical Design, Vol. 134, No. 5., MD DOI: / , AlGeddawy T., ElMaraghy H., 2011, Manufacturing Systems Synthesis Using Knowledge Discovery, CIRP Annals, Vol. 60/1, AlGeddawy T., ElMaraghy H., 2011, Design of Single Assembly Line for the Delayed Differentiation of Product Variants, Flexible Services and Manufacturing Journal (FSMJ), Vol. 22/3-4, pp Samy, S., ElMaraghy, H., 2010, A Model for Measuring Products Assembly Complexity, International Journal of Computer Integrated Manuf. (IJCIM), Vol. 23/11, pp Messelhy, K.T., ElMaraghy, W.H., ElMaraghy, H.A., 2010, A Periodicity Metric for Assessing Maintenance Strategies, JMST, 3/2, pp AlGeddawy, T., ElMaraghy, H.A., 2010, A Model for Co-Evolution in Manufacturing Based on Biological Analogy, Int. Journal of Production Research (IJPR), DOI: / Tolio, T., D. Ceglarek, H.A. ElMaraghy, A. Fischer, S.J. Hu, L. Laperriere, S.T. Newman, J. Vancza, Co-Evolution of Products, Processes, and Productions Systems, CIRP Annals, Vol. 59/2, pp AlGeddawy T., ElMaraghy H., 2010, Co-evolution hypotheses and model for manufacturing planning, CIRP Annals, Vol. 59/1, pp AlGeddawy, T., ElMaraghy, H., 2009, Assembly Systems Layout Design Model for Delayed Products Differentiation, International Journal of Production Research (IJPR), Vol. 48/18, pp Page 5 of 9
6 Mohib, A., ElMaraghy, H.A., 2009, Tolerance-based Localization Algorithm: Form tolerance verification application, International Journal of Advanced Manufacturing Technology (IJAMT), Published on-line Deif, A., ElMaraghy, H., 2009, Modelling and Analysis of Dynamic Capacity Complexity in Multistage Production", Journal of Production Planning & Control (JPPC), Vol. 20/8, pp Barari, A., ElMaraghy, H.A., ElMaraghy, W.H., 2009, Design for Manufacturing of Sculptured Surfaces: A Computational Platform, Journal of Computing and Information Science in Engineering (JCISE), Vol. 9/2, pp. [ ]-[ ] Ismail, M., ElMaraghy, H.A., 2009, Progressive Modeling An Enabler of Dynamic Changes in Production Planning, CIRP Annals, Vol. 58/1, pp ElMaraghy, H.A., Azab, A., Schuh, G., Pulz, C., 2009, Managing Complexity due to Products Design and Lot-Size Variations, CIRP Annals, Vol. 58/1, pp ElMaraghy, H.A., Mahmoudi, N., 2009, Concurrent Design of Product Modules Structure and Global Supply Chain Configuration, International Journal of Computer Integrated Manufacturing (IJCIM), Vol. 22/6, pp ElMaraghy, H.A., Manns, M., 2009, Synchronisation of Inter-arrival Times in Manufacturing Systems with Main- and Side-Loops, International Journal of Production Research (IJPR), Vol. 47, No. 7, pp Mohib, A., Azab, A., ElMaraghy, H., 2009, Feature-based Hybrid Inspection Planning: A Mathematical Programming Approach, International Journal of Computer Integrated Manufacturing (IJCIM) Special Issue on: Integrated Products / Processes and Systems in Changeable Manufacturing, Vol. 22/1, pp ElMaraghy, H.A., Manns, M., 2009, Inter-arrival time patterns in manufacturing systems with main and side loops, International Journal of Production Research (IJPR), Vol. 47/10, pp Barari, A., ElMaraghy, H.A., Orban, P., 2008, NURBS Representation of Estimated Surfaces Resulting from Machining Errors, International Journal of Computer Integrated Manufacturing (IJCIM), Vol. 22/5, pp ElMaraghy H., AlGeddawy, T., Azab, A., 2008, Modelling Evolution in Manufacturing: A Biological Analogy, CIRP Annals, Vol. 57/1, pp Recent Full Papers in REFEREED CONFERENCES: AlGeddawy, T., Abbas, M., ElMaraghy, H., 2014, Design for Mobility A Customer Value Creation Approach, 6 th CIRP Conference on Industrial Product-Service Systems (IPSS 2014), Windsor, Ontario, Canada, 1-2 May. Procedia CIRP, Vol. 16, pp Deif, A., ElMaraghy, H., 2014, Impact of Dynamic Capacity Policies on WIP Level in Mix Leveling Lean Environment, 47 th CIRP Conference on Manufacturing Systems (CMS 2014), Windsor, Ontario, Canada, April. Procedia CIRP, Vol. 17, pp Mueller, E., Wagner, U., AlGeddawy, T., ElMaraghy, H., 2014, Product Family Design for Changeable Learning Factories, 47 th CIRP Conference on Manufacturing Systems (CMS 2014), Windsor, Ontario, Canada, April, Procedia CIRP, Vol. 17, pp Navaei, J., ElMaraghy, H., 2014, Grouping Product Variants Based on Alternate Machines for Each Operation, 47 th CIRP Conference on Manufacturing Systems (CMS 2014), Windsor, Ontario, Canada, April, Procedia CIRP, Vol. 17, pp Page 6 of 9
7 Seleim, A., ElMaraghy, H., 2014, Max-Plus Modeling of Manufacturing Flow Lines, 47 th CIRP Conference on Manufacturing Systems (CMS 2014), Windsor, Ontario, Canada, April, Procedia CIRP, Vol. 17, pp Hanafy, M., ElMaraghy, H., 2014, Co-design of Products and Systems using a Bayesian Network, 47 th CIRP Conference on Manufacturing Systems (CMS 2014), Windsor, Ontario, Canada, April, Procedia CIRP, Vol.17, pp Kashkoush, M., ElMaraghy, H., 2014, Product Family Formation for Reconfigurable Assembly Systems, 47 th CIRP Conference on Manufacturing Systems (CMS 2014), Windsor, Ontario, Canada, April, CIRP Procedia, Vol. 17, pp AlGeddawy, T., Abbas, M., ElMaraghy, H., 2014, Design for Mobility A Customer Value Creation Approach, 6 th CIRP Conference on Industrial Product-Service Systems (IPSS 2014), Windsor, Ontario, Canada, 1-2 May. Procedia CIRP, Vol. 16, pp Hanafy, M., ElMaraghy, H., 2013, A Multi-Period Changeable Modular Product Assembly Model, Proc., 5 th Int., Conf. on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Munich, Germany, 6-9 October, pp Kashkoush, M., ElMaraghy, H., 2013, Generating Master Assembly Sequence Using Consensus Trees, Proc. 5 th Int., Conf. on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Munich, Germany, 6-9 October, pp Seleim, A., ElMaraghy, H., 2013, Transient Analysis of Re-Entrant Manufacturing Systems, Proc, 5 th Int. Conf. on Changeable, Agile, Reconfigurable and Virtual Production (CARV), 6-9 October, Munich, Germany, pp Kashkoush, M., ElMaraghy, H., 2013, Matching Bills of Materials Using Tree Reconciliation, Proc. 46 th CIRP Conference on Manufacturing Systems, DOI: /j/procir/203/ , Vol. 7, Procedia CIRP, May, Setubal, Portugal, pp Al-Zaher, A., ElMaraghy, W., Pasek, Z.J., ElMaraghy, H., 2013, Design of Reconfigurable Automotive Framing System, Proc. 23 rd CIRP Design Conference, March. Bochum, Germany, pp ElMaraghy, H., Hanafy, M., 2013, A Modular Dynamic Products Platforms Design Model, Proc. 23 rd CIRP Design Conference, March. Bochum, Germany, pp ElMaraghy, H., AlGeddawy, T., 2013, Determining Granularity Level in Product Design Architecture, Proc. 23 rd CIRP Design Conference, March. Bochum, Germany, pp Seleim, A., Azab, A., AlGeddawy, T., Simulation Methods for Changeable Manufacturing, 45 th CIRP Conference on Manufacturing Systems (CIRP CMS), University of Patras, Laboratory for Manufacturing Systems Automation, Athens, Greece, May, pp# ElMaraghy, H., ElMaraghy, W., 2012, Variety and Complexity of Mechanical Design and Manufacturing Systems, Proc. ASME th Biennial Conference On Engineering Systems Design and Analysis (ESDA2012), July 2-4, Nantes, France. Wagner, U., AlGeddawy, T., ElMaraghy, H., Müller, E., 2012, The State-of-the-Art and Prospects of Learning Factories, 45 th CIRP Manufacturing Systems Conference in Athens, Greece (CIRP CMS), University of Patras, Laboratory for Manufacturing Systems and Automation May. Accepted. Roshanaei, V., ElMaraghy, H., Azab, A, 2012, Sequence-based MILP Modeling for Flexible Job Shop Scheduling, IIE Conference in Orlando, Florida, USA. May 21 May 23, Page 7 of 9
8 Roshanaei, V., ElMaraghy, H., Azab, A., 2012, Enhanced Mixed Integer Linear Programming for Flexible Job Shop Scheduling, 4th CIRP Conference On Assembly Technologies And Systems (CATS), May 21-23, 2012, The University of Michigan, Ann Arbor, Michigan, USA. pp M. Kashkoush, T. AlGeddawy and H. ElMaraghy, 2012, Discovering Design Structure Matrix for Family of Products, 4th CIRP Conference On Assembly Technologies And Systems (CATS), May 21-23, 2012, The University of Michigan, Ann Arbor, Michigan, USA. pp V. Espinoza, T. AlGeddawy, S.N. Samy, H. ElMaraghy, 2012, Assessing Structural Complexity of Manufacturing Systems Layout, 4th CIRP Conference On Assembly Technologies And Systems (CATS) May 21-23, 2012, The University of Michigan, Ann Arbor, Michigan, USA. pp ElMaraghy, H., AlGeddawy, T., Azab, A. And ElMaraghy, W., 2011, Change in Manufacturing Research and Industrial Challenge. Keynote Paper, Proc. 4 th Int. Conf. On Changeable, Agile, Reconfigurable and Virtual Production (CARV 2011), 2-5 October, Montreal, pp 2-9. AlGeddawy, T., ElMaraghy, H.A., 2011, Product Variety Management in Design and Manufacturing: Challenges and Strategies, 4th Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Montreal, Canada, 2-5 October, pp Samy, S.N., ElMaraghy, H.A., 2011, Parts and Assembly Equipment Complexity Dependency Matrix, 4th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2011), Montreal, Canada, 2-5 October, 2011, ISBN , pp AlGeddawy, T., ElMaraghy, H.A., 2011, Nature inspired co-evolution model in the manufacturing world of artefacts, 4th Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Montreal, Canada, 2-5 October, pp Hanafy, M., ElMaraghy, H.A., 2011, Products Features Dependency Inference using Bayesian Networks for New Product Design, Proc. 44 th CIRP, International Conference on Manufacturing Systems (ICMS 2011), Madison, Wisconsin, 1-3 June. Nyhuis, P, ElMaraghy, H., Azab, A., Pachow-Frauenhofer, J., 2011, A Control-Based Modeling Approach to Changeable Manufacturing, 44 th CIRP International Conference on Manufacturing Systems (ICMS 2011), Madison, Wisconsin, 1-3 June. AlGeddawy, Tarek, ElMaraghy, H.A., 2010, Realizing Associated Evolution Courses: The Co- Evolution in the Artificial World of Manufacturing, International Conference on Evolutionary Computation (ICEC), Valencia, Spain, Oct ElMaraghy, H.A., Samy, S.N., Espinoza Vega, Valeria, 2010, A Classification Code for Assembly Systems, 3rd CIRP Conference on Assembly Technologies and Systems (CATS), Trondheim, Norway, June 1-3, pp Hanafy, M., AlGeddawy, Tarek N., ElMaraghy, H.A., 2010, Complex Adaptive Systems Applications in Manufacturing Systems Modeling, 3rd CIRP Conference on Assembly Technologies and Systems (CATS), Trondheim, Norway, June 1-3, pp AlGeddawy, Tarek N., ElMaraghy, H.A., 2010, Balanced Delayed Differentiation Assembly Lines Design, 3rd CIRP Conference on Assembly Technologies and Systems (CATS), Trondheim, Norway, June 1-3, pp Samy, S.N., ElMaraghy, H.A., 2010, Measuring the Complexity of Manual Products Assembly, 43rd CIRP International Conference of Manufacturing Systems (ICMS), Vienna, Austria, May 26-28, pp Page 8 of 9
9 AlGeddawy, T., ElMaraghy, H.A., 2009, Sustainability and Modularity Analysis of Varying Products and Families Using Cladistics, 3rd Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Munich, Germany, 5-7 October 2009 AlGeddawy, T., ElMaraghy, H.A., 2009, Management of Co-evolution in Manufacturing Systems, 3rd Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Munich, Germany, 5-7 October 2009 Mohib, A., ElMaraghy, H.A., 2009, CAD-based Segmentation and Profile Tolerance-based Localization, 3rd Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV), Munich, Germany, 5-7 October 2009 Meselhy, K.T., ElMaraghy, W.H., ElMaraghy, H.A., 2009, Failure and Maintenance from a Periodic Complexity Perspective,16th CIRP International Conference on Life Cycle Engineering, Cairo, Egypt, 4-6 May 2009 Mohib, A., ElMaraghy, H.A., 2009, CAD-based Closed-form Solution Algorithm to Verify Cylindricity, 11th CIRP International Conference on Computer Aided Tolerancing, Annecy, France, March 2009 AlGeddawy, T.N., ElMaraghy, H.A., 2009, Symbiotic Design of Products and Manufacturing Systems Using Biological Analysis, CIRP Int. Design Conference, Cranfield University, UK, March 2009 (In Press). Meselhy, K.T., ElMaraghy, W.H., ElMaraghy, H.A., 2009, A Periodicity Metric for Assessing Maintenance Strategies, International CIRP Conference on Industrial Product-Service Systems (IPS2), Cranfield University, UK, 1-2 April 2009 (In Press). Meselhy, K.T., ElMaraghy, W.H., ElMaraghy, H.A., 2009, A Comprehensive Complexity-based Failure Modeling for Mainainability and Serviceability, International CIRP Conference on Industrial Product-Service Systems (IPS2), Cranfield University, UK, 1-2 April 2009 (In Press). Page 9 of 9
Hoda ElMaraghy Sample List of Publications
1 Book Publication: The outcome of several of Dr. ElMaraghy s research activities that were carried out as part of the CRC program was documented as a basis for a new reference book on Changeable and Reconfigurable
More informationEnabling Manufacturing Competitiveness and Economic Sustainability
Enabling Manufacturing Competitiveness and Economic Sustainability Hoda A. ElMaraghy Editor Enabling Manufacturing Competitiveness and Economic Sustainability Proceedings of the 4th International Conference
More informationTullio TOLIO - Politecnico di Milano Department of Mechanical Engineering. Opening, welcome, introduction of invited guests. Approval of the agenda
2005 TT Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering Meeting Opening Opening, welcome, introduction of invited guests Approval of the agenda Approval of the minutes Organized
More informationProcess Planning - The Link Between Varying Products and their Manufacturing Systems p. 37
Definitions and Strategies Changeability - An Introduction p. 3 Motivation p. 3 Evolution of Factories p. 7 Deriving the Objects of Changeability p. 8 Elements of Changeable Manufacturing p. 10 Factory
More informationA COMPUTATIONAL TOOL FOR VIRTUAL PRODUCT DEVELOPMENT EXPLOITING CHANGEABILITY KNOWLEDGE
21 ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, 21-25 AUGUST 2017, THE UNIVERSITY OF BRITISH COLUMBIA, VANCOUVER, CANADA A COMPUTATIONAL TOOL FOR VIRTUAL PRODUCT DEVELOPMENT EXPLOITING CHANGEABILITY
More informationAvailable online at ScienceDirect. Procedia Engineering 63 (2013 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 63 (2013 ) 318 326 The Manufacturing Engineering Society International Conference, MESIC 2013 A knowledge based application
More informationDevelopment of an Intelligent Agent based Manufacturing System
Development of an Intelligent Agent based Manufacturing System Hong-Seok Park 1 and Ngoc-Hien Tran 2 1 School of Mechanical and Automotive Engineering, University of Ulsan, Ulsan 680-749, South Korea 2
More informationCNR ICMATE, Padova - Italy. ENEA, Roma - Italy. Monica Fabrizio 1, Amelia Montone 2, Federico Cernuschi 3 1
Mission Innovation. Clean Energy Materials Innovation Challenge 6: to accelerate the exploration, discovery and use of new high performance, low-cost clean energy materials Monica Fabrizio 1, Amelia Montone
More informationExpert cooperative robots for highly skilled operations for the factory of the future
Expert cooperative robots for highly skilled operations Expert cooperative robots for highly skilled operations for the factory of the future Presenter: Dr. Sotiris MAKRIS Laboratory for Manufacturing
More informationVirtual Reality: Basic Concept
Virtual Reality: Basic Concept INTERACTION VR IMMERSION VISUALISATION NAVIGATION Virtual Reality is about creating substitutes of real-world objects, events or environments that are acceptable to humans
More informationPPP InfoDay Brussels, July 2012
PPP InfoDay Brussels, 09-10 July 2012 The Factories of the Future Calls in ICT WP2013. Objectives 7.1 and 7.2 DG CONNECT Scientific Officers: Rolf Riemenschneider, Mariusz Baldyga, Christoph Helmrath,
More informationUsing Existing Standards as a Foundation for Information Related to Factory Layout Design
Using Existing Standards as a Foundation for Information Related to Factory Layout Design D. Chen, M. Hedlind, A. von Euler-Chelpin, T. Kjellberg Production Engineering, KTH - Royal Institute of Technology,
More informationUtilizing Assembly Features for determination of Grasping Skill in Assembly System
Utilizing Assembly Features for determination of Grasping Skill in Assembly System Baha Hasan 1, Jan Wikander 1, Mauro Onori 2 1 Department of Machine Design Royal Institute of Technology (KTH) Stockholm,
More informationAnkur Sinha, Ph.D. Indian Institute of Technology, Kanpur, India Bachelor of Technology, Department of Mechanical Engineering, 2006
Ankur Sinha, Ph.D. Department of Information and Service Economy Aalto University School of Business Former: Helsinki School of Economics Helsinki 00100 Finland Email: Ankur.Sinha@aalto.fi EDUCATION Aalto
More informationFront Digital page Strategy and Leadership
Front Digital page Strategy and Leadership Who am I? Prof. Dr. Bob de Wit What concerns me? - How to best lead a firm - How to design the strategy process - How to best govern a country - How to adapt
More informationTullio TOLIO - Politecnico di Milano Department of Mechanical Engineering
Tullio TOLIO - Politecnico di Milano Department of Mechanical Engineering Agenda ABOUT - Working Group opening - Prof. Tullio Tolio Connections to other CIRP initiatives - Prof. Laszlo Monostori, Prof.
More informationExploring Requirements and Implementation of Changeability and Reconfigurability in Danish Manufacturing
Aalborg Universitet Exploring Requirements and Implementation of ability and Reconfigurability in Danish Manufacturing Andersen, Ann-Louise; Larsen, Jesper Kranker; Brunø, Thomas Ditlev; Nielsen, Kjeld;
More informationA CYBER PHYSICAL SYSTEMS APPROACH FOR ROBOTIC SYSTEMS DESIGN
Proceedings of the Annual Symposium of the Institute of Solid Mechanics and Session of the Commission of Acoustics, SISOM 2015 Bucharest 21-22 May A CYBER PHYSICAL SYSTEMS APPROACH FOR ROBOTIC SYSTEMS
More informationProposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept
Proposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept Fernando Mas 1, Alejandro Gómez 2, José Luis Menéndez 1, and José Ríos 2 1 AIRBUS,
More informationExploring manufacturing solutions for SMEs
Exploring manufacturing solutions for SMEs Agnieszka Radziwon (agra@mci.sdu.dk) Mads Clausen Institute, University of Southern Denmark Henrik Blichfeldt Institute of Technology and Innovation, University
More informationShaping the digital twin for design and production engineering
Shaping the digital twin for design and production engineering Benjamin Schleich, Nabil Anwer, Luc Mathieu, Sandro Wartzack To cite this version: Benjamin Schleich, Nabil Anwer, Luc Mathieu, Sandro Wartzack.
More informationCyber-Physical Production Systems. Professor Svetan Ratchev University of Nottingham
Cyber-Physical Production Systems Professor Svetan Ratchev University of Nottingham Contents 1. Introduction 3 2. Key definitions 4 2.1 Cyber-Physical systems 4 2.2 Cyber-Physical Production Systems 4
More informationFront Digital page Strategy and leadership
Front Digital page Strategy and leadership Who am I? Prof. Dr. Bob de Wit What concerns me? - How to best lead a firm - How to design the strategy process - How to best govern a country - How to adapt
More informationThe evolution of manufacturing SPECIES
Available online at www.sciencedirect.com Procedia CIRP 7 (2013 ) 187 192 Forty Sixth CIRP Conference on Manufacturing Systems 2013 The evolution of manufacturing SPECIES James Scott Baldwin a *, Christen
More informationTECHNOLOGY VISION 2017 IN 60 SECONDS
TECHNOLOGY VISION 2017 IN 60 SECONDS GET THE ESSENTIALS THE BIG READ SHORT ON TIME? VIEW HIGHLIGHTS 5 MIN READ VIEW FULL REPORT 45 MIN READ VIEW SHORT REPORT 15 MIN READ OVERVIEW #TECHV1SION2017 2017 TREND
More informationComponent Based Mechatronics Modelling Methodology
Component Based Mechatronics Modelling Methodology R.Sell, M.Tamre Department of Mechatronics, Tallinn Technical University, Tallinn, Estonia ABSTRACT There is long history of developing modelling systems
More informationCurriculum Vitae. Department of Computer and Information Sciences The Norwegian University of Science and Technology (NTNU) 7034 Trondheim Norway
Curriculum Vitae General Information Name: Keith Linn Downing Birthdate: July 1, 1961 Nationality: United States Citizen Occupation: Professor of Computer Science Address: Phone: +47 73 59 02 71 Email:
More informationMember State Programme Objec ve Focus Priori es Method Funding Source
Member State Programme Objec ve Focus Priori es Method Funding Source Austria Belgium Denmark France France Produktion der Zukunft (Production of the Future) MADE DIFFERENT Factories of the future Academy
More informationAnca ANDREICA Producția științifică
Anca ANDREICA Producția științifică Lucrări categoriile A, B și C Lucrări categoriile A și B puncte 9 puncte Lucrări categoria A A. Agapie, A. Andreica, M. Giuclea, Probabilistic Cellular Automata, Journal
More informationBook Chapters. Refereed Journal Publications J11
Book Chapters B2 B1 A. Mouchtaris and P. Tsakalides, Low Bitrate Coding of Spot Audio Signals for Interactive and Immersive Audio Applications, in New Directions in Intelligent Interactive Multimedia,
More informationBest practices for new project creation - a Large Industry view
Best practices for new project creation - a Large Industry view Knut Hufeld, +49 89 234 52653, knut.hufeld@infineon.com Infineon Technologies AG, 81726 Munich, Germany content 1 2 3 4 Motivation for funded
More informationICT4 Manuf. Competence Center
ICT4 Manuf. Competence Center Prof. Yacine Ouzrout University Lumiere Lyon 2 ICT 4 Manufacturing Competence Center AI and CPS for Manufacturing Robot software testing Development of software technologies
More informationAdvances in Robotics & Automation
Advances in Robotics & Automation Advances in Robotics & Automation Bolmsjo, Adv Robot Autom 2014, 3:1 DOI: Review Article Open Access Reconfigurable and Flexible Industrial Robot Systems Gunnar Bolmsjo
More informationIndustrial and Systems Engineering
Industrial and Systems Engineering 1 Industrial and Systems Engineering Industrial and Systems Engineers plan, design, implement, and analyze systems. This engineering discipline is where technology, people,
More informationNORDIC ICT FORESIGHT Current state and future prospects in 2006
NORDIC ICT FORESIGHT Current state and future prospects in 2006 Toni Ahlqvist Senior Research Scientist, Project Manager VTT Technical Research Centre of Finland Technology Foresight and Technology Assessment
More informationBaltic Sea Region Urban Forum for Smart Cities - a market place for smart solutions
Baltic Sea Region Urban Forum for Smart Cities - a market place for smart solutions Krista Kampus Council of the Baltic Sea States, Head of Baltic 21 Unit Measuring Progress: Achieving Smarter Cities 26
More informationArchitectures On-Demand for Any Domain Using Stable Software Patterns
Architectures On-Demand for Any Domain Using Stable Software Patterns FIVE DAYS SEMINAR PROPOSAL DR. MOHAMED E. FAYAD Professor of Computer Engineering Computer Engineering Dept., College of Engineering
More informationON THE INTERPLAY BETWEEN PLATFORM CONCEPT DEVELOPMENT AND PRODUCTION MAINTENANCE
21 ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, 21-25 AUGUST 2017, THE UNIVERSITY OF BRITISH COLUMBIA, VANCOUVER, CANADA ON THE INTERPLAY BETWEEN PLATFORM CONCEPT DEVELOPMENT AND PRODUCTION MAINTENANCE
More informationINTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001
INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 01 GLASGOW, AUGUST 21-23, 2001 DESIGN OF PART FAMILIES FOR RECONFIGURABLE MACHINING SYSTEMS BASED ON MANUFACTURABILITY FEEDBACK Byungwoo Lee and Kazuhiro
More informationDESIGN FOR INDUSTRIE 4.0
INTERNATIONAL DESIGN CONFERENCE - DESIGN 2016 Dubrovnik - Croatia, May 16-19, 2016. DESIGN FOR INDUSTRIE 4.0 G. Schuh, S. Rudolf and M. Riesener Keywords: design for X, industrie 4.0, product development
More informationStrategy for Building Innovative Cluster in Sweden: A Study on Kista Science City
Strategy for Building Innovative Cluster in Sweden: A Study on Kista Science City Sang-Chul Park, Korea Polytechnic University/ Korea Advanced Institute of Science and Technology (KAIST)/Gothenburg University,
More informationFactories of the Future 2020 Roadmap. PPP Info Days 9 July 2012 Rikardo Bueno Anirban Majumdar
Factories of the Future 2020 Roadmap PPP Info Days 9 July 2012 Rikardo Bueno Anirban Majumdar RD&I roadmap 2014-2020 roadmap will cover R&D and innovation activities guiding principles: industry competitiveness,
More informationDigital Manufacturing
Digital Manufacturing High Value Manufacturing Catapult / MTC point of view Harald Egner EU & Research Partnership Manager Nottingham, 30 th November HVM Catapult - History HVM Catapult 7 World class centres
More informationKnowledge Management in collaborative engineering
114 Int. J. Collaborative Engineering, Vol. 1, Nos. 1/2, 2009 Knowledge Management in collaborative engineering Waguih ElMaraghy Faculty of Engineering, Department of Industrial and Manufacturing Systems
More informationThe Smart Production Laboratory: A Learning Factory for Industry 4.0 Concepts
The Smart Production Laboratory: A Learning Factory for Industry 4.0 Concepts Marco Nardello 1 ( ), Ole Madsen 1, Charles Møller 1 1 Aalborg University, Department of Materials and Production Fibigerstræde
More informationCOMPUTER AIDED TRADITION JIGS AND FIXTURES DESIGN
8 Military Technical College Kobry El-Kobbah, Cairo, Egypt. 17 th International Conference on Applied Mechanics and Mechanical Engineering. COMPUTER AIDED TRADITION JIGS AND FIXTURES DESIGN H.M.A Hussein
More informationMachinery Prognostics and Health Management. Paolo Albertelli Politecnico di Milano
Machinery Prognostics and Health Management Paolo Albertelli Politecnico di Milano (paollo.albertelli@polimi.it) Goals of the Presentation maintenance approaches and companies that deals with manufacturing
More informationPUBLICATIONS BY THE STAFF Springer Vol 32, Issue 2, Dec Ms.S.Sujatha
PUBLICATIONS BY THE 2009-2010 JOURNAL NAME AND Springer Vol 32, Issue 2, Dec 2009 - Intelligent Agent Based Artificial Immune System for computer security review 2010-2011 Ms.R.Mala JOURNAL NAME AND CIIT
More informationGamECAR JULY ULY Meetings. 5 Toward the future. 5 Consortium. E Stay updated
NEWSLETTER 1 ULY 2017 JULY The project engine has started and there is a long way to go, but we aim at consuming as less gas as possible! It will be a game, but a serious one. Playing it for real, while
More informationTHE DRIVING FORCE BEHIND THE FOURTH INDUSTRIAL REVOLUTION
TECNALIA INDUSTRY AND TRANSPORT INDUSTRY 4.0 THE DRIVING FORCE BEHIND THE FOURTH INDUSTRIAL REVOLUTION www.tecnalia.com INDUSTRY 4.0 A SMART SOLUTION THE DRIVING FORCE BEHINDTHE FOURTH INDUSTRIAL REVOLUTION
More informationTHE MANAGEMENT OF INFORMATIONS AND CAD IN THE CONCEPTION AND DEVELOPMENT PHASES OF A PRODUCT
5 th INTERNATIONAL MULTIDISCIPLINARY CONFERENCE THE MANAGEMENT OF INFORMATIONS AND CAD IN THE CONCEPTION AND DEVELOPMENT PHASES OF A PRODUCT Ispas Constantin, Ghionea Ionuţ, University POLITEHNICA of Bucharest,
More informationXiaoning Jin, Ph.D. 359 Snell Engineering Center Northeastern University Boston, MA (617)
Xiaoning Jin, Ph.D. 359 Snell Engineering Center Northeastern University Boston, MA 02115 (617) 373-8733 Email: xi.jin@northeastern.edu A. PERSONAL: A.1 Education Ph. D. 2012 Industrial and Operations
More informationTHE NEW GENERATION OF MANUFACTURING SYSTEMS
THE NEW GENERATION OF MANUFACTURING SYSTEMS Ing. Andrea Lešková, PhD. Technical University in Košice, Faculty of Mechanical Engineering, Mäsiarska 74, 040 01 Košice e-mail: andrea.leskova@tuke.sk Abstract
More informationAssessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit April 2018.
Assessment of Smart Machines and Manufacturing Competence Centre (SMACC) Scientific Advisory Board Site Visit 25-27 April 2018 Assessment Report 1. Scientific ambition, quality and impact Rating: 3.5 The
More informationDevelopment of a modular and reconfigurable manufacturing system - method and industry case
THE 4 th STUDENT SYMPOSIUM ON MECHANICAL AND MANUFACTURING ENGINEERING Development of a modular and reconfigurable manufacturing system - method and industry case B. Martinez Bort, C. Meldgaard Thomsen,
More informationDr. Klaus Funk Zentrum Digitalisierung.Bayern Munich, IT2Industry
Dr. Klaus Funk Zentrum Digitalisierung.Bayern Munich, IT2Industry 2017-11-15 Agenda ZD.B - Platform Digital Production and Engineering Industrie 4.0 in the framework of digital trends Essentials of digital
More informationAn Integrated Simulation Method to Support Virtual Factory Engineering
International Journal of CAD/CAM Vol. 2, No. 1, pp. 39~44 (2002) An Integrated Simulation Method to Support Virtual Factory Engineering Zhai, Wenbin*, Fan, xiumin, Yan, Juanqi, and Zhu, Pengsheng Inst.
More informationAutonomic Computing a Means of Achieving Dependability?
Autonomic Computing a Means of Achieving Dependability? Roy Sterritt 1 Dave Bustard 2 Centre for Software Process Technologies (CSPT) 1 School of Computing and Mathematics 2 School of Computing and Information
More informationCOST IC0902: Brief Summary
COST IC0902: Brief Summary Dr. Oliver Holland King s College London Prof Maria Gabriella di Benedetto Prof. Maria-Gabriella di Benedetto University of Rome La Sapienza Chair of COST IC0902 COST IC0902:
More informationArtificial Neural Networks for New Operating Modes Determination for Variable Energy Cyclotron
Artificial Neural Networks for New Operating Modes Determination for Variable Energy Cyclotron M. Abd El- Kawy, M-Shaker Ismail, M. Abdel-Bary, and M.M.Ouda Department of Computer and system & Eng., Faculty
More informationDevelopment of motor body fixture using blackboard framework approch
Development of motor body fixture using blackboard framework approch Mr. A. D. PARSANA M.E.[Machine Design] Student, Department Of Mechanical Engineering, R. K. College Of Engineering And Technology, Rajkot,
More informationDepartment of Mechanical Engineering
Velammal Engineering College Department of Mechanical Engineering Name & Photo : Dr. G. Prabhakaran Designation: Qualification : Professor & Head M.E., Ph.D Area of Specialization :, Production & Optimization
More informationThe European Platform of Universities engaged in Energy Research (EPUE) an EUA Initiative
The European Platform of Universities engaged in Energy Research (EPUE) an EUA Initiative Prof. Torbjørn Digernes Chair of the EUA-EPUE Steering Group; Member of the EUA Research Policy Working Group;
More informationTowards EU-US Collaboration on the Internet of Things (IoT) & Cyber-physical Systems (CPS)
Towards EU-US Collaboration on the Internet of Things (IoT) & Cyber-physical Systems (CPS) Christian Sonntag Senior Researcher & Project Manager, TU Dortmund, Germany ICT Policy, Research and Innovation
More informationMECHATRONICS Master study program. St. Kliment Ohridski University in Bitola Faculty of Technical Sciences Bitola.
MECHATRONICS Master study program St. Kliment Ohridski University in Bitola Faculty of Technical Sciences Bitola www.tfb.edu.mk 1 2 Contents Mechatronics - an interdisciplinary approach Competences / Invest
More informationModeling Manufacturing Systems. From Aggregate Planning to Real-Time Control
Modeling Manufacturing Systems From Aggregate Planning to Real-Time Control Springer-Verlag Berlin Heidelberg GmbH Paolo Brandimarte. Agostino Villa (Eds.) Modeling Manufacturing Systems From Aggregate
More informationQLectives: evolving software to support quality
QLectives: evolving software to support quality Nigel Gilbert and the QLectives team This work was partly supported by the Future and Emerging Technologies Programme (FP7-COSI-ICT) of the European Commission
More informationProposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept
Proposal for the Conceptual Design of Aeronautical Final Assembly Lines Based on the Industrial Digital Mock-Up Concept Fernando Mas, Alejandro Gómez, José Menéndez, José Ríos To cite this version: Fernando
More informationAI MAGAZINE AMER ASSOC ARTIFICIAL INTELL UNITED STATES English ANNALS OF MATHEMATICS AND ARTIFICIAL
Title Publisher ISSN Country Language ACM Transactions on Autonomous and Adaptive Systems ASSOC COMPUTING MACHINERY 1556-4665 UNITED STATES English ACM Transactions on Intelligent Systems and Technology
More informationFUNCTIONAL RESOURCE MODEL ENABLES FLEXIBLE OFFER PROCESSING
DAAAM INTERNATIONAL SCIENTIFIC BOOK 2010 pp. 001-008 CHAPTER 01 FUNCTIONAL RESOURCE MODEL ENABLES FLEXIBLE OFFER PROCESSING DUERR, H.; TRAN, N.; UNGER, K.; MILITZER, J. & TEICH, T. Abstract: To cope with
More informationArchitecture Design and Validation Methods
Architecture Design and Validation Methods Springer-Verlag Berlin Heidelberg GmbH Egon Börger (Ed.) Architecture Design and Validation Methods With 175 Figures, Springer Editor Prof. Dr. Egon Börger Universita
More informationISGAN ANNEX 7 SMART GRIDS TRANSITIONS
ISGAN ANNEX 7 SMART GRIDS TRANSITIONS On Institutional Change ERA-NET SG+ Knowledge Community, Vienna, 19.5.2015 Klaus Kubeczko, Austrian Institute of Technology (AIT) Focus of Annex 7 Institutional Change
More informationLinda ZHANG. Ph.D.in Industrial Engineering. Full Professor, Operations Management.
29/06/2018 Linda ZHANG Ph.D.in Industrial Engineering Full Professor, Operations Management l.zhang@ieseg.fr EDUCATION 2007 1998 HDR, Management Sciences, Economics, University of Paris 13, France Ph.D.in
More informationInternational Collaboration Tools for Industrial Development
International Collaboration Tools for Industrial Development 6 th CSIR Conference 5-6 October, 2017 Dan Nagy Managing Director IMS International dnagy@ims.org U.S. DEPARTMENT OF COMMERCE (NIST) 28 Countries
More informationCommunications in Computer and Information Science 85
Communications in Computer and Information Science 85 Albert Fleischmann Detlef Seese Christian Stary (Eds.) S-BPM ONE Setting the Stage for Subject-Oriented Business Process Management First International
More informationECTP & EurekaBuild. Jesús Rodríguez ECTP SG chairman EurekaBuild chairman DRAGADOS (ACS Group), Spain
EUREKA UMBRELLA PROJECT: Technologies for a Sustainable and Competitive Construction Sector ECTP & EurekaBuild Jesús Rodríguez ECTP SG chairman EurekaBuild chairman DRAGADOS (ACS Group), Spain 3.6.2007
More informationOriginal citation: Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Némethb, István. (2014) Recipebased integrated semantic product, process, resource (PPR) digital modelling methodology. Procedia CIRP, Voluem
More informationInterpretation Method for Software Support of the Conceptual
Interpretation Method for Software Support of the Conceptual Redesign Process Emergence of a new concepts in the interpretation process Jakub Jura 1, Jiří Bíla 2 1,22 Faculty of Mechanical Engineering,
More informationName Prof. Sherif Kassem. Qualifications Ph.D. in Computer and Information System M.Sc. in Computer Engineering B.Sc. in Computer Engineering
Name Prof. Sherif Kassem Qualifications Ph.D. in Computer and Information System M.Sc. in Computer Engineering B.Sc. in Computer Engineering Contact Room 434, The Sir Peter Mansfield Building, 199 Taikang
More informationIntelligent Infrastructures Systems for Sustainable Urban Environment
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XV, NR. 1, 2008, ISSN 1453-7397 Daniel Amariei, Gilbert Rainer Gillich, Dan Baclesanu, Theodoros Loutas, Constantinos Angelis Intelligent Infrastructures
More informationARTEMIS Industry Association. ARTEMIS Joint Undertaking ARTEMIS INDUSTRY ASSOCIATION & JOINT UNDERTAKING
ARTEMIS Joint Undertaking ARTEMIS INDUSTRY ASSOCIATION & JOINT UNDERTAKING is the association for Embedded Systems actors in Europe. It represents the research community including industry, universities
More informationAvailable online at ScienceDirect. Procedia CIRP 43 (2016 ) th CIRP Conference on Computer Aided Tolerancing (CAT)
Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 43 (2016 ) 94 99 14th CIRP Conference on Computer Aided Tolerancing (CAT) Variation Analysis considering manual assembly complexity
More informationA Novel Robotic Manufacturing System for Learning Innovation
A Novel Robotic Manufacturing System for Learning Innovation Yuxin Liang 1, Jin Hu 2, Xiumin Diao 2 1 School of Agricultural & Biological Engineering 2 School of Engineering Technology Purdue University,
More informationCM Plenary session conclusion (M. Le Louarn, INFSO D5/DE sector)
CM Plenary session conclusion (M. Le Louarn, INFSO D5/DE sector) Enacting the new/continued cooperations set up (DoW update, joint actions etc.) Informing EC staff timely on latest/further developments/plans
More informationCyber-Physical Systems: Challenges for Systems Engineering
Cyber-Physical Systems: Challenges for Systems Engineering agendacps Closing Event April 12th, 2012, EIT ICT Labs, Berlin Eva Geisberger fortiss An-Institut der Technischen Universität München Cyber-Physical
More informationThe International Academy for Production Engineering NEWSLETTER. N 32 April 2008
The International Academy for Production Engineering NEWSLETTER N 32 April 2008 CIRP Office: 9, rue Mayran, 75009 Paris France Tel +33 1 45262180 Fax +33 1 45269215 e mail cirp@cirp.net web site: http://www.cirp.net
More informationUNIVERSITY OF CALCUTTA
UNIVERSITY OF CALCUTTA FACULTY ACADEMIC PROFILE/ CV a.i.1. Full name of the faculty member: Arpita Das a.i.2. Designation: Assistant Professor a.i.3. Specialisation : Radio Physics and Electronics a.i.4.
More informationEU businesses go digital: Opportunities, outcomes and uptake
Digital Transformation Scoreboard 2018 EU businesses go digital: Opportunities, outcomes and uptake February 2018 Internal Market, Industry, Entrepreneurship and SMEs Executive summary Conditions and outcomes
More informationStudy on Need Assessment of Mechatronics Education in Norway and Poland
Study on Need Assessment of Mechatronics Education in Norway and Poland Hirpa G. Lemu 1*, Jan Frick 1, Tadeusz Uhl 2, Wojciech Lisowski 2, Piotr Piwowarczyk 2 1 University of Stavanger, Stavanger, Norway
More informationJAMES M. CALVIN. 15 Montgomery Avenue Associate Professor
JAMES M. CALVIN Home Address: Work Address: 15 Montgomery Avenue Associate Professor Montville, NJ 07045 Computer Science Department Phone: (973) 808-0379 New Jersey Institute of Technology Newark, NJ
More informationPresident Barack Obama The White House Washington, DC June 19, Dear Mr. President,
President Barack Obama The White House Washington, DC 20502 June 19, 2014 Dear Mr. President, We are pleased to send you this report, which provides a summary of five regional workshops held across the
More informationWhat s RRI / WG1? - toward horizontal dynamic manufacturing -
What s RRI / WG1? - toward horizontal dynamic manufacturing - 22 th, Mar. 2017 Robot Revolution Initiative (RRI) Deputy Secretary-general (Industrial IoT Specialist) Yutaka Manchu 2017 Copyright Robot
More informationProgram Automotive Security and Privacy
FFI BOARD FUNDED PROGRAM Program Automotive Security and Privacy 2015-11-03 Innehållsförteckning 1 Abstract... 3 2 Background... 4 3 Program objectives... 5 4 Program description... 5 5 Program scope...
More informationCall for contributions
Call for contributions FTA 1 2018 - Future in the Making F u t u r e - o r i e n t e d T e c h n o l o g y A n a l y s i s Are you developing new tools and frames to understand and experience the future?
More informationUsing of Artificial Neural Networks to Recognize the Noisy Accidents Patterns of Nuclear Research Reactors
Int. J. Advanced Networking and Applications 1053 Using of Artificial Neural Networks to Recognize the Noisy Accidents Patterns of Nuclear Research Reactors Eng. Abdelfattah A. Ahmed Atomic Energy Authority,
More informationTHE DIGITALISATION CHALLENGES IN LITHUANIAN ENGINEERING INDUSTRY. Darius Lasionis LINPRA Director November 30, 2018 Latvia
THE DIGITALISATION CHALLENGES IN LITHUANIAN ENGINEERING INDUSTRY Darius Lasionis LINPRA Director November 30, 2018 Latvia THE ENGINEERING INDUSTRIES ASSOCIATION OF LITHUANIA (LINPRA) is an independent
More informationChangjiang Yang. Computer Vision, Pattern Recognition, Machine Learning, Robotics, and Scientific Computing.
Changjiang Yang Mailing Address: Department of Computer Science University of Maryland College Park, MD 20742 Lab Phone: (301)405-8366 Cell Phone: (410)299-9081 Fax: (301)314-9658 Email: yangcj@cs.umd.edu
More informationEnergyVille: some figures. Employees >700 >11,000 >3,500 >1,200 Revenues (Meuro) PhD s 91 >
EnergyVille: some figures Employees >700 >11,000 >3,500 >1,200 Revenues (Meuro) 174 933 500 88 PhD s 91 >5000 350 542 EnergyVille some figures (2017) EnergyVille Technology development thermal energy Contents
More informationCPS Engineering Labs A Network of Design Centres Expediting and accelerating the realisation of trustworthy CPS Holger Pfeifer CPSE Labs co-ordinator fortiss, Munich, Germany Funded by the European Union
More informationIndustry 4.0: Mapping the Structure and Evolution of an Emerging Field
Industry 4.0: Mapping the Structure and Evolution of an Emerging Field Yaşar Tonta and Güleda Doğan 1 Hacettepe University Department of Information Management, 06800 Beytepe, Ankara, Turkey {yasartonta,
More information