DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing

Transcription

1 DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing DE027 Rev.001 CMCT COURSE OUTLINE Page 1 of 5

2 Training Description: Wellhead and x-mas tree is the main equipment for oil production, water injection and down hole operation. It is installed on the casing head to seal the annular space between casing and tubing, control wellhead pressure, adjust well flow rate and transport oil to pipeline. This course is focused on wellhead operation and maintenance activities which providers the delegates with the master level of these activities. Training Objective: By the end of the training, participants will be able to: Be knowledgeable on the following topics, x-mas tree wellhead operations as well as well head testing Fully understand the Tree types and pipe pigging Fully understand of the Xmas Tree Valves Understand the operation of Xmas Tree and pipe pigging Have the safety rules during dealing with Xmas Tree valves Take the necessary corrective action when there is a problem Execute operation problems Christmas Training Designed for: This course is directed towards all staff in Maintenance, Engineering and Production. The course will also benefit anyone who wishes to update themselves on Piping Engineering Technologies, judge the suitability of these technologies for their needs, and learn how to implement them for the benefit of their organizations. Training Program: DAY ONE: PRE-TEST Introduction Production system overview Main Process Sections Wellheads Manifolds/gathering Separation Gas compression Metering DE027 Rev.001 CMCT COURSE OUTLINE Page 2 of 5

3 DAY TWO: Wellhead Components Valves Type of valves Valve maintenance & repair Valve selection Closing & Penning conditions Chocks Type of chokes Chock maintenance DAY THREE: X-mas tree maintenance Pressure gauges maintenance Temperature gauges maintenance Control system Down hole Safety valves (SSVS) Surface Safety valves (SVS) Wellhead Troubleshooting High wellhead pressure Flow line deposits Sludge problems Hydrate problems Downstream shutdown Production Operation Problem solving Down time production Quick production problem identification Methods of production problems solving DAY FOUR: Pipeline Safety and Regulations Pipeline failures and regulatory developments Impact of recent legislation and regulations Review of inspection and operation compliance requirements Pigging for Operation and Maintenance Pigging during construction Pigging during operation Utility Pigs Cleaning pigs Sealing pigs Gauging pigs Dual diameter pigs DE027 Rev.001 CMCT COURSE OUTLINE Page 3 of 5

4 Magnetic cleaning pigs Designing a Pipeline for Pigging Pig traps and pigging stations Location and tracking devices DAY FIVE: In line Inspection (ILI) Tools Theory, Performance, and Detection Limits Line Pipe Integrity Threats ILI Tools Available to the Operator Metal Loss Inspection Deformation Tools Crack Detection Course Conclusion POST-TEST and EVALUATION Training Requirement: Hand s on practical sessions, equipment and software will be applied during the course if required and as per the client s request. Training Methodology: This interactive training course includes the following training methodologies as a percentage of the total tuition hours: - 30% Lectures, Concepts, Role Play 30% Workshops & Work Presentations, Techniques 20% Based on Case Studies & Practical Exercises 20% Videos, Software & General Discussions Pre and Post Test Training Certificate(s): Internationally recognized certificate(s) will be issued to each participant who completed the course. Training Fees: As per the course location - This rate includes participant s manual, hand-outs, buffet lunch, coffee/tea on arrival, morning & afternoon of each day. DE027 Rev.001 CMCT COURSE OUTLINE Page 4 of 5

5 Training Timings: Daily Timings: 07:45-08:00 Morning Coffee / Tea 08:00-10:00 First Session 10:00-10:20 Recess (Coffee/Tea/Snacks) 10:20-12:20 Second Session 12:20-13:30 Recess (Prayer Break & Lunch) 13:30-15:00 Last Session For training registrations or in-house enquiries, please contact: Aisha Relativo: aisha@cmc-me.com Tel.: or Mob.: Training & Career Development Department DE027 Rev.001 CMCT COURSE OUTLINE Page 5 of 5