Implementation of Integrated Project Delivery (IPD) and Building Information Modelling (BIM) In the Construction Industry.
|
|
|
- Georgiana Parks
- 6 years ago
- Views:
Transcription
1 Implementation of Integrated Project Delivery (IPD) and Building Information Modelling (BIM) In the Construction Industry Iman kaini A Project Report submitted in partial fulfilment of the Requirements for the award of the degree of Master of Science (Construction Management) Faculty of Civil engineering UniversitiTeknologi Malaysia JANUARY 2013
2 iii This project is dedicated to my dear Family and also my dear wife who brought joy to my life, for their endless support and encouragement.
3 iv ACKNOWLEDGEMENT First and foremost, I would like to express heartfelt gratitude to my supervisor Mr. BachanSingh for their constant support during my study at UTM. They inspired me greatly to work on this project. Their willingness to motivate me contributed tremendously to my project. I have learned a lot from them and I am fortunate to have them as my mentors and supervisors Besides, I would like to thank the authority of Universiti Teknologi Malaysia (UTM) for providing me with a good environment and facilities such as Computer laboratory to complete this project with software which I need during the process.
4 v ABSTRACT To increase productivity, the global construction industry has adopted several different project delivery methods and IT tools over the last 10 years. Although there have been previous efforts to define and Implement new generation methods such as Integrated Project Delivery (IPD) and Building Information Modeling (BIM) in the construction industry, but these concepts are still considered new-comers especially in most of developing countries. These countries widely use the traditional methods namely Design-Bid-Build (DBB) and Computer Aided Design (CAD) instead of using them. This study is to analyze Building Information Modeling (BIM) applications potential in the process of Integrated Project Delivery (IPD) and compare it with the Implementation process of conventional tool (CAD) into the Design bid-build delivery method. For this reason, a case which is a three story residential apartment building located on Tehran is selected. The process of implementation of existing CAD drawings of this case into DBB will be analyzed. Then, the case will be modeled and simulated within BIM applications and its exploiting potential will be identified within IPD. It is expected that the shifting framework path from CAD-DBB into BIM-IPD based on the lessons learned from case study and conducted interviews are developed to clarify these concepts capabilities.
5 vi ABSTRAK Kemajuan dalam bidang teknologi telah mencipta peluang bagi industri untuk menjadi lebih cekap dalam menyiapkan sesuatukerja. Salah satu industri yang dapat merintis kemungkinan ini adalah industri pembinaan ; dengan menggunakan perisian Pemodelan Maklumat Bangunan (BIM), Penghantaran ProjekBersepadu (IPD) telah menjadi satucara yang sangat berkesan dalam menguruskan sesuatu projek pembinaan. IPD adalahcara yang sangat berbeza dari cara yang sedia ada dalam menguruskan sesuatu projek pembinaan. Tujuan kajian ini dilakukan adalah untuk menilai potensi aplikasi Pemodelan Maklumat Bangunan (BIM) dalam Penghantaran Projek Bersepadu (IPD) dan perbandingan dengan proses konvensional dalam kaedah penghantaran Reka-Bida- Bina (Design-Bid-Build) oleh ACD. Objektif kajian ini adalah untuk mengkaji proses penghantaran maklumat Rekabentuk BantuanBerkomputer (CAD) dalam kaedah penghantaran Reka-Bida-Bina dan kaedah IPD, untuk mengkaji potensi perlaksanaan proses Pemodelan Maklumat Bangunant (BIM) bagi rekabentuk dan pembinaan, untuk mengenal pasti halangan dalam pelaksanaan Pemodelan Maklumat Bangunan (BIM) dalam Penghantaran Projek Bersepadu dan untuk mengenal pasti perbezaan antara proses Rekabentuk Bantuan Berkomputer (CAD) dan proses Pemodelan Maklumat Bangunan (BIM) bagi rekabentuk dan pembinaan melalui keskajian. Menggunakan IPD lebih kos efektif dan pengurusan masa yang lebih cekap berbanding kaedah tradisionalindustri. Penghantaran Projek Bersepadu (IPD) adalah satu proses baru yang semakin mendapat pengiktirafan dalam industri pembinaan. Pada masa ini, majoritiindustripembinaanmenggunakan proses Bida-Reka-Bina yang seringmenyebabkankoslebihtinggidankelewatantarikhakhirprojek.dengan keupayaan penyelarasan perisian Pemodelan Maklumat Bangunan (BIM), seperti Autodesk Revit, ArchiCAD dan penggunaan syarikat IPD, pengurangan kos dan penggunaan masa yang lebih berkesan telah dapat dilihat. Objektif projek ini dicapai melalui pelbagaikaedahpenyelidikan: kajian sejarah, kajian literatur, soal selidik dan kajiankes
ENERGY ANALYSIS AND OPTIMIZATION OF PUBLIC BUILDING USING BUILDING INFORMATION MODELING APPLICATION
ENERGY ANALYSIS AND OPTIMIZATION OF PUBLIC BUILDING USING BUILDING INFORMATION MODELING APPLICATION AIDIN NOBAHAR SADEGHIFAM UNIVERSITI TEKNOLOGI MALAYSIA ENERGY ANALYSIS AND OPTIMIZATION OF PUBLIC BUILDING
EFFECTIVENESS OF SAFETY PROGRAMS IN MALAYSIAN CONSTRUCTION INDUSTRY JAIMEY ATTAU
i EFFECTIVENESS OF SAFETY PROGRAMS IN MALAYSIAN CONSTRUCTION INDUSTRY JAIMEY ATTAU A project report is submitted in partial fulfillment of the requirements for the award of the degree of Master of Science
A HYBRID APPROACH BASED ON ARIMA AND ARTIFICIAL NEURAL NETWORKS FOR CRIME SERIES FORECASTING MOHD SUHAIMI MOHD ZAKI
A HYBRID APPROACH BASED ON ARIMA AND ARTIFICIAL NEURAL NETWORKS FOR CRIME SERIES FORECASTING MOHD SUHAIMI MOHD ZAKI A dissertation submitted in partial fulfillment of the requirements for the award of
CONSTRUCTABILITY COMPARISON BETWEEN IBS AND CONVENTIONAL CONSTRUCTION EHSAN HARIRCHIAN UNIVERSITI TEKNOLOGI MALAYSIA
CONSTRUCTABILITY COMPARISON BETWEEN IBS AND CONVENTIONAL CONSTRUCTION EHSAN HARIRCHIAN UNIVERSITI TEKNOLOGI MALAYSIA CONSTRUCTABILITY COMPARISON BETWEEN IBS AND CONVENTIONAL CONSTRUCTION EHSAN HARIRCHIAN
CONSTRUCTION SAFETY AND MANAGEMENT PRACTICES IN BANGLADESH MD SHAMIM HASAN SARKAR
CONSTRUCTION SAFETY AND MANAGEMENT PRACTICES IN BANGLADESH MD SHAMIM HASAN SARKAR A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Science
INTEGRATING COOPERATIVE USERS TO DEVELOP FRAMEWORK FOR AN EFFECTIVE MOBILE PHYSIOTHERAPY YOUCEF BENFERDIA
INTEGRATING COOPERATIVE USERS TO DEVELOP FRAMEWORK FOR AN EFFECTIVE MOBILE PHYSIOTHERAPY YOUCEF BENFERDIA A dissertation submitted in partial fulfilment of the requirements for the award of the degree
A GRAY-SCALE IMAGE STEGANOGRAPHY TECHNIQUE USING FIBONACCI 12-BITPLANE DECOMPOSITION AND LSB APPROACH SABAH FADHEL HAMOOD
A GRAY-SCALE IMAGE STEGANOGRAPHY TECHNIQUE USING FIBONACCI 12-BITPLANE DECOMPOSITION AND LSB APPROACH SABAH FADHEL HAMOOD A dissertation submitted in partial fulfillment of the requirements for the award
UNIVERSITI TEKNOLOGI MALAYSIA
AN INVESTIGATION OF EFFECTIVE FACTORS ON EFFORT ESTIMATION OF SOFTWARE PROJECTS INSIDE THE ORGANIZATION ELHAM KHATIBI BARDSIRI UNIVERSITI TEKNOLOGI MALAYSIA AN INVESTIGATION OF EFFECTIVE FACTORS ON EFFORT
AN IMPROVED ACCURACY OF WEB SERVICE SELECTION BASED ON MULTI-CRITERIA DECISION MAKING AND WEB SERVICE MODELING ONTOLOGY
AN IMPROVED ACCURACY OF WEB SERVICE SELECTION BASED ON MULTI-CRITERIA DECISION MAKING AND WEB SERVICE MODELING ONTOLOGY MOJTABA KHEZRIAN UNIVERSITI TEKNOLOGI MALAYSIA AN IMPROVED ACCURACY OF WEB SERVICE
PUMP SCHEDULING OPTIMIZATION FOR WATER SUPPLY SYSTEM USING ADAPTIVE WEIGHTED SUM GENETIC ALGORITHM FOLORUNSO TALIHA ABIODUN
PUMP SCHEDULING OPTIMIZATION FOR WATER SUPPLY SYSTEM USING ADAPTIVE WEIGHTED SUM GENETIC ALGORITHM FOLORUNSO TALIHA ABIODUN A project report submitted in partial fulfilment of the requirements for the
MODELING OF IMAGE PROCESSING ALGORITHMS FOR HARDWARE-SOFTWARE CO-SIMULATION IBRAHIM ISA UNIVERSITI TEKNOLOGI MALAYSIA
MODELING OF IMAGE PROCESSING ALGORITHMS FOR HARDWARE-SOFTWARE CO-SIMULATION IBRAHIM ISA UNIVERSITI TEKNOLOGI MALAYSIA MODELING OF IMAGE PROCESSING ALGORITHMS FOR HARDWARE-SOFTWARE CO-SIMULATION IBRAHIM
TWO DIMENSIONAL DIRECT CURRENT RESISTIVITY MAPPING FOR SUBSURFACE INVESTIGATION USING COMPUTATIONAL INTELLIGENCE TECHNIQUES
TWO DIMENSIONAL DIRECT CURRENT RESISTIVITY MAPPING FOR SUBSURFACE INVESTIGATION USING COMPUTATIONAL INTELLIGENCE TECHNIQUES MOHD HAKIMI BIN OTHMAN UNIVERSITI TEKNOLOGI MALAYSIA TWO DIMENSIONAL DIRECT CURRENT
SELECTION OF THE INDUSTRILIZED BUILDING MATERIAL SUPPLIER BY ANALYTIC HIERARCHY PROCESS METHOD MOHAMMAD YOUSEF MORAVVEJI
SELECTION OF THE INDUSTRILIZED BUILDING MATERIAL SUPPLIER BY ANALYTIC HIERARCHY PROCESS METHOD MOHAMMAD YOUSEF MORAVVEJI A Project Report submitted in partial fulfillment of the requirements for the award
MICROWAVE PARAMETERS FOR BITUMEN EMULSION AND ITS APPLICATION IN HIGHWAY ENGINEERING NAJEEB ULLAH KHAN
MICROWAVE PARAMETERS FOR BITUMEN EMULSION AND ITS APPLICATION IN HIGHWAY ENGINEERING NAJEEB ULLAH KHAN A project report submitted in partial fulfillment of the requirements for the award of the degree
THE APPLICATION OF TERRESTRIAL LASER SCANNING AND WEB-BASED GEOGRAPHICAL INFORMATION SYSTEM FOR INDOOR ASSET MANAGEMENT
THE APPLICATION OF TERRESTRIAL LASER SCANNING AND WEB-BASED GEOGRAPHICAL INFORMATION SYSTEM FOR INDOOR ASSET MANAGEMENT LEE SZUE YANN UNIVERSITI TEKNOLOGI MALAYSIA THE APPLICATION OF TERRESTRIAL LASER
JPEG IMAGE TAMPERING DETECTION BASED ON BLOCKING ARTIFACTS ALI EBRAHIMI
i JPEG IMAGE TAMPERING DETECTION BASED ON BLOCKING ARTIFACTS ALI EBRAHIMI A dissertation submitted in partial fulfillment of the requirements for the award of the degree of Master of Computer Science (Information
HOUMAN OMIDI. A project report submitted in partial fulfilment of the. Master of Engineering (Electrical-Power) Faculty of Electrical Engineering
ENHANCEMENT OF A FAULT ANALYSIS METHOD USING ARC RESISTAANCE FORMULA HOUMAN OMIDI A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering
HIGH-PERFORMANCE DIGITAL FILTER IN FPGA SITI SUHAILA MOHD YUSOF UNIVERSITI TEKNOLOGI MALAYSIA
HIGH-PERFORMANCE DIGITAL FILTER IN FPGA SITI SUHAILA MOHD YUSOF UNIVERSITI TEKNOLOGI MALAYSIA ii HIGH-PERFORMANCE DIGITAL FILTER IN FPGA SITI SUHAILA MOHD YUSOF A project report submitted in partial fulfilment
MOTIVATION AND BARRIER FACTORS OF ENVIRONMENTAL MANAGEMENT SYSTEMS IMPLEMENTATION IN CONSTRUCTION
i MOTIVATION AND BARRIER FACTORS OF ENVIRONMENTAL MANAGEMENT SYSTEMS IMPLEMENTATION IN CONSTRUCTION NUR SYAHEERA BINTI OTHMAN UNIVERSITI TEKNOLOGI MALAYSIA iv MOTIVATION AND BARRIER FACTORS OF ENVIRONMENTAL
AN IMPROVED METHOD FOR UNIVERSITY BUILDING S ENERGY EFFICIENCY INDEX USING CLUSTER APPROACH NUR NAJIHAH BINTI ABU BAKAR UNIVERSITI TEKNOLOGI MALAYSIA
AN IMPROVED METHOD FOR UNIVERSITY BUILDING S ENERGY EFFICIENCY INDEX USING CLUSTER APPROACH NUR NAJIHAH BINTI ABU BAKAR UNIVERSITI TEKNOLOGI MALAYSIA i AN IMPROVED METHOD FOR UNIVERSITY BUILDING S ENERGY
ANALYSIS OF MARINE INCIDENTS IN MALAYSIA SURHAN JAMIL BIN HARON
ANALYSIS OF MARINE INCIDENTS IN MALAYSIA SURHAN JAMIL BIN HARON A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering (Marine Technology)
NON-LINEAR WATER LEVEL FORECASTING OF DUNGUN RIVER USING HYBRIDIZATION OF BACKPROPAGATION NEURAL NETWORK AND GENETIC ALGORITHM SITI HAJAR BINTI ARBAIN
NON-LINEAR WATER LEVEL FORECASTING OF DUNGUN RIVER USING HYBRIDIZATION OF BACKPROPAGATION NEURAL NETWORK AND GENETIC ALGORITHM SITI HAJAR BINTI ARBAIN A thesis submitted in fulfillment of the requirement
ASSESSING CLOUD COMPUTING SECURITY LEVEL OF AWARENESS AMONG IT AND NON IT STUDENTS IN UTM ALWUHAYD MUTEB MOHAMMED UNIVERSITI TEKNOLOGI MALAYSIA
1 ASSESSING CLOUD COMPUTING SECURITY LEVEL OF AWARENESS AMONG IT AND NON IT STUDENTS IN UTM ALWUHAYD MUTEB MOHAMMED UNIVERSITI TEKNOLOGI MALAYSIA 4 ASSESSING CLOUD COMPUTING SECURITY LEVEL OF AWARENESS
EFFECTIVE AEROSOL OPTICAL THICKNESS RETRIEVAL ALGORITHM USING MODIS 500 METRE DATA AHMAD MUBIN BIN WAHAB UNIVERSITI TEKNOLOGI MALAYSIA
EFFECTIVE AEROSOL OPTICAL THICKNESS RETRIEVAL ALGORITHM USING MODIS 500 METRE DATA AHMAD MUBIN BIN WAHAB UNIVERSITI TEKNOLOGI MALAYSIA EFFECTIVE AEROSOL OPTICAL THICKNESS RETRIEVAL ALGORITHM USING MODIS
ADOPTION OF COMPUTERIZED ACCOUNTING INFORMATION SYSTEM (CAIS) AMONG MALAYSIAN SMEs
ADOPTION OF COMPUTERIZED ACCOUNTING INFORMATION SYSTEM (CAIS) AMONG MALAYSIAN SMEs DOCTOR OF PHILOSOPHY OF ACCOUNTING UNIVERSITI MALAYSIA TERENGGANU ADOPTION OF COMPUTERIZED ACCOUNTING INFORMATION SYSTEM
EXPECTED LIFE CYCLE COST FOR SYSTEMS WITH REPAIRABLE COMPONENTS AMIRHOSSEIN EBRAHIMI
EXPECTED LIFE CYCLE COST FOR SYSTEMS WITH REPAIRABLE COMPONENTS AMIRHOSSEIN EBRAHIMI A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Engineering
HARMONIC MODELING IN POWER DISTRIBUTION SYSTEM USING TIME SERIES SIMULATION CHE KU FARHANA BINTI CHE KU AMRAN UNIVERSITI TEKNOLOGI MALAYSIA
HARMONIC MODELING IN POWER DISTRIBUTION SYSTEM USING TIME SERIES SIMULATION CHE KU FARHANA BINTI CHE KU AMRAN UNIVERSITI TEKNOLOGI MALAYSIA i HARMONIC MODELING IN POWER DISTRIBUTION SYSTEM USING TIME SERIES
PRODUCT DESIGN IMPROVEMENT USING DESIGN FOR MANUFACTURE AND ASSEMBLY (DFMA) METHODOLOGY
PRODUCT DESIGN IMPROVEMENT USING DESIGN FOR MANUFACTURE AND ASSEMBLY (DFMA) METHODOLOGY MUHAMMAD NAZRUL BIN MOHD YUSOFF UNIVERSITI TEKNIKAL MALAYSIA MELAKA MUHAMMAD NAZRUL B MOHD YUSOFF BACH. DEG. OF MECHANICAL
A BIOMETRIC ENCRYPTION SYSTEM ALGORITHM DEVELOPMENT AND SYSTEM LEVEL DESIGN RABIA BAKHTERI UNIVERSITI TEKNOLOGI MALAYSIA
A BIOMETRIC ENCRYPTION SYSTEM ALGORITHM DEVELOPMENT AND SYSTEM LEVEL DESIGN RABIA BAKHTERI UNIVERSITI TEKNOLOGI MALAYSIA A BIOMETRIC ENCRYPTION SYSTEM ALGORITHM DEVELOPMENT AND SYSTEM LEVEL DESIGN RABIA
CONTINUOUS INDIVIDUAL PLOT CURVES TECHNIQUE FOR SIMULTANEOUS TARGETING AND DESIGN OF A MASS EXCHANGE NETWORK YANWARIZAL UNIVERSITI TEKNOLOGI MALAYSIA
CONTINUOUS INDIVIDUAL PLOT CURVES TECHNIQUE FOR SIMULTANEOUS TARGETING AND DESIGN OF A MASS EXCHANGE NETWORK YANWARIZAL UNIVERSITI TEKNOLOGI MALAYSIA CONTINUOUS INDIVIDUAL PLOT CURVES TECHNIQUE FOR SIMULTANEOUS
COMPARATIVE STUDY OF REGTANGULAR MICROSTRIP PATCH ANTENNA ARRAY DESIGN ABDULLAHI MOALLIM YUSUF
COMPARATIVE STUDY OF REGTANGULAR MICROSTRIP PATCH ANTENNA ARRAY DESIGN ABDULLAHI MOALLIM YUSUF A project report submitted in partial fulfilment of the requirements for the award of the degree of Master
THERMAL ANALYSIS OF H.V INSULATION OIL DURING PARTIAL DISCHARGE DETECTION RASOOL ABDELFADIL GATEA UNIVERSITI TEKNOLOGI MALAYSIA
1 THERMAL ANALYSIS OF H.V INSULATION OIL DURING PARTIAL DISCHARGE DETECTION RASOOL ABDELFADIL GATEA UNIVERSITI TEKNOLOGI MALAYSIA 4 THERMAL ANALYSIS OF H.V INSULATION OIL DURING PARTIAL DISCHARGE DETECTION
A HIGH SPEED 2D CONVOLUTION HARDWARE MODULE FOR IMAGE PROCESSING APPLICATIONS IN FPGA BEENAL BABA UNIVERSITI TEKNOLOGI MALAYSIA
i A HIGH SPEED 2D CONVOLUTION HARDWARE MODULE FOR IMAGE PROCESSING APPLICATIONS IN FPGA BEENAL BABA UNIVERSITI TEKNOLOGI MALAYSIA i A HIGH SPEED 2D CONVOLUTION HARDWARE MODULE FOR IMAGE PROCESSING APPLICATIONS
OPTIMAL HEAT TRANSFER OF HEAT SINK DESIGN BASED ON ELECTRONIC PACKAGE THERMAL DISTRIBUTION USING COMSOL PACKAGE SOFTWARE
OPTIMAL HEAT TRANSFER OF HEAT SINK DESIGN BASED ON ELECTRONIC PACKAGE THERMAL DISTRIBUTION USING COMSOL PACKAGE SOFTWARE RASHIDAH BINTI ROSLI UNIVERSITI TEKNOLOGI MALAYSIA i OPTIMAL HEAT TRANSFER OF HEAT
AN FPGA IMPLEMENTATION OF ALAMOUTI S TRANSMIT DIVERSITY TECHNIQUE PUSHPAMALAR MUKILAN
i AN FPGA IMPLEMENTATION OF ALAMOUTI S TRANSMIT DIVERSITY TECHNIQUE PUSHPAMALAR MUKILAN A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Engineering
OBJECT CLASSIFICATION USING DEEP LEARNING FONG SOON FEI
OBJECT CLASSIFICATION USING DEEP LEARNING FONG SOON FEI A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering (Electrical-Computer and
SILICON NANOWIRE FIELD-EFFECT TRANSISTOR (SINWFET) AND ITS CIRCUIT LEVEL PERFORMANCE SITI NORAZLIN BINTI BAHADOR UNIVERSITI TEKNOLOGI MALAYSIA
SILICON NANOWIRE FIELD-EFFECT TRANSISTOR (SINWFET) AND ITS CIRCUIT LEVEL PERFORMANCE SITI NORAZLIN BINTI BAHADOR UNIVERSITI TEKNOLOGI MALAYSIA i SILICON NANOWIRE FIELD-EFFECT TRANSISTOR (SiNWFET) AND ITS
IDENTIFYING THE BARRIERS IN THE DEVELOPMENT OF BUILDING INFORMATION MODELING IN CONSTRUCTION ENGINEERING AND MANAGEMENT OF EDUCATIONAL SYSTEMS
IDENTIFYING THE BARRIERS IN THE DEVELOPMENT OF BUILDING INFORMATION MODELING IN CONSTRUCTION ENGINEERING AND MANAGEMENT OF EDUCATIONAL SYSTEMS ALI HEDAYATI A project report submitted in partial fulfillment
PATTERN AND FREQUENCY RECONFIGURABLE ANTENNA FOR WIRELESS APPLICATIONS DELPHINE ABIJURU. requirements for the award of the degree of
PATTERN AND FREQUENCY RECONFIGURABLE ANTENNA FOR WIRELESS APPLICATIONS DELPHINE ABIJURU A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering
DYNAMIC ANALYSIS OF AIRCRAFT LANDING GEAR SADEGH IMANI YENGEJEH
DYNAMIC ANALYSIS OF AIRCRAFT LANDING GEAR SADEGH IMANI YENGEJEH A thesis submitted in fulfillment of the requirements for the award of the degree of Master of Engineering (Mechanical Engineering) Faculty
EFFECTIVENESS OF EXTERNAL TECHNOLOGY TRANSFER TO CEPP, UTM
EFFECTIVENESS OF EXTERNAL TECHNOLOGY TRANSFER TO CEPP, UTM CHEONG YEE WAH UNIVERSITI TEKNOLOGI MALAYSIA EFFECTIVENESS OF EXTERNAL TECHNOLOGY TRANSFER TO CEPP, UTM CHEONG YEE WAH This dissertation is submitted
POST-TENSION COLUMN FOR IBS BLOCKWORK BUILDING SYSTEM ZALILAH BINTI AYOP
i POST-TENSION COLUMN FOR IBS BLOCKWORK BUILDING SYSTEM ZALILAH BINTI AYOP A project report submitted in partial fulfillment of the requirement for the award of the degree of Master of Engineering (Civil
KORELASI. Standard Technical Manual. Rekod Pindaan / Semakan. Pindaan 1 : Pindaan pada pengenalan. Pindaan pada tatacara no
Hospital Universiti Sains Malaysia KORELASI Disediakan oleh: Disemak oleh: Disahkan oleh: En. Mohd Iman Hafiz Ibrahim Date : 3/10/2016 Dr. Noor Suryani Mohd Ashari Date: 3/10/2016 Date: 3/10/2016 Rekod
SYSTEM IDENTIFICATION AND POSITION CONTROL OF PNEUMATIC ACTUATOR USING EMBEDDED SYSTEM TAHA MOHAMMED AHMED SADEQ
SYSTEM IDENTIFICATION AND POSITION CONTROL OF PNEUMATIC ACTUATOR USING EMBEDDED SYSTEM TAHA MOHAMMED AHMED SADEQ A project report submitted in partial fulfilment of the requirements for the award of the
GRAPHICS PROCESSING UNIT BASED PARALLEL COPY MOVE IMAGE FORGERY DETECTION SCHEME AHMAD UWAYS BIN ZULKURNAIN
GRAPHICS PROCESSING UNIT BASED PARALLEL COPY MOVE IMAGE FORGERY DETECTION SCHEME AHMAD UWAYS BIN ZULKURNAIN A project report submitted in partial fulfilment of the requirements for the award of the degree
ENHANCEMENT OF VOLTAGE STABILITY AND POWER LOSSES FOR DISTRIBUTION SYSTEM WITH DISTRIBUTED GENERATION USING GENETIC ALGORITHM OMAR TAHSEEN OMAR KHALAF
ENHANCEMENT OF VOLTAGE STABILITY AND POWER LOSSES FOR DISTRIBUTION SYSTEM WITH DISTRIBUTED GENERATION USING GENETIC ALGORITHM OMAR TAHSEEN OMAR KHALAF A project report submitted in partial fulfilment of
LIFE CYCLE ASSESSMENT OF GLOBAL WARMING POTENTIAL IN PRECAST BUILDING COMPONENT WAN ZULIYANA BINTI W ZULKIFFLE
LIFE CYCLE ASSESSMENT OF GLOBAL WARMING POTENTIAL IN PRECAST BUILDING COMPONENT WAN ZULIYANA BINTI W ZULKIFFLE A project report submitted in fulfillment of the requirements for the award of the degree
3 AN EXPLORATORY STUDY UNIVERSITY TEKNOLOGI MALAYSIA S INNOVATION TOWARD COMMERCIALIZATION BAWER MARWAN ABDULAHAD
iii 2 3 AN EXPLORATORY STUDY UNIVERSITY TEKNOLOGI MALAYSIA S INNOVATION TOWARD COMMERCIALIZATION BAWER MARWAN ABDULAHAD A dissertation submitted in partial fulfilment of the requirements for the award
OPTIMUM ANALYSIS OF OFFSHORE STRUCTURES LIFTING PADEYES USING FINITE ELEMNT METHOD ABDELRAHIM MUSA MAHGOUB HAMADELNIL
OPTIMUM ANALYSIS OF OFFSHORE STRUCTURES LIFTING PADEYES USING FINITE ELEMNT METHOD ABDELRAHIM MUSA MAHGOUB HAMADELNIL A report submitted in partial fulfillment of the requirements for the award of the
ADAPTIVE CROSS WIGNER-VILLE DISTRIBUTION FOR PARAMETER ESTIMATION OF DIGITALLY MODULATED SIGNALS CHEE YEN MEI
ADAPTIVE CROSS WIGNER-VILLE DISTRIBUTION FOR PARAMETER ESTIMATION OF DIGITALLY MODULATED SIGNALS CHEE YEN MEI A thesis submitted in fulfilment of the requirements for the award of the degree of Doctor
PRODUCTIVITY IMPROVEMENTS USING LEAN PRACTICES AT JAPANESE ELECTRICAL AND ELECTRONICS MANUFACTURING AFIF AIMADUDDIN BIN PARNON
PRODUCTIVITY IMPROVEMENTS USING LEAN PRACTICES AT JAPANESE ELECTRICAL AND ELECTRONICS MANUFACTURING AFIF AIMADUDDIN BIN PARNON A project report submitted in partial fulfilment of the requirements for the
SIMULATION AND OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PROCESS USING MATLAB ELNAZ KARIMPOUR UNIVERSITI TEKNOLOGI MALAYSIA
i SIMULATION AND OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PROCESS USING MATLAB ELNAZ KARIMPOUR UNIVERSITI TEKNOLOGI MALAYSIA 1 SIMULATION AND OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PROCESS
OPTIMAL PROPORTIONAL INTEGRAL DERIVATIVE CONTROLLER FOR AUTOMATIC VOLTAGE REGULATOR SYSTEM USING PARTICLE SWARM OPTIMIZATION ALGORITHM
i OPTIMAL PROPORTIONAL INTEGRAL DERIVATIVE CONTROLLER FOR AUTOMATIC VOLTAGE REGULATOR SYSTEM USING PARTICLE SWARM OPTIMIZATION ALGORITHM WAN ZAKARIA BIN WAN HASSAN A project report submitted in partial
IMPROVED TOTAL SITE HEAT INTEGRATION INCORPORATING PRESSURE DROP AND PROCESS MODIFICATIONS CHEW KEW HONG
IMPROVED TOTAL SITE HEAT INTEGRATION INCORPORATING PRESSURE DROP AND PROCESS MODIFICATIONS CHEW KEW HONG A thesis submitted in fulfilment of the requirements for the award of the degree of Doctor of Philosophy
DEVELOPMENT OF MONOPOLE SENSORS FOR RICE QUALITY CHARACTERIZATION IN MALAYSIA JAMALIAH BINTI SALLEH
DEVELOPMENT OF MONOPOLE SENSORS FOR RICE QUALITY CHARACTERIZATION IN MALAYSIA JAMALIAH BINTI SALLEH A thesis submitted in fulfilment of the requirements for the award of the degree of Master of Engineering
IMPROVING THE DOCUMENTATION OF USER S REQUIREMENTS FOR E-SERVICE SYSTEMS USING SERVICE RESPONSIBILITY TABLE IBRAHIM SALIHU ANKA
IMPROVING THE DOCUMENTATION OF USER S REQUIREMENTS FOR E-SERVICE SYSTEMS USING SERVICE RESPONSIBILITY TABLE IBRAHIM SALIHU ANKA A dissertation submitted in partial fulfillment of the requirements for the
OPTIMAL DESIGN AND SYNTHESIS OF RICE SUPPLY CHAIN LIM JENG SHIUN UNIVERSITI TEKNOLOGI MALAYSIA
OPTIMAL DESIGN AND SYNTHESIS OF RICE SUPPLY CHAIN LIM JENG SHIUN UNIVERSITI TEKNOLOGI MALAYSIA OPTIMAL DESIGN AND SYNTHESIS OF RICE SUPPLY CHAIN LIM JENG SHIUN A thesis submitted in fulfilment of the requirements
MESOPYME-IEMA SOFTWARE PROCESS EVALUATION MODEL FOR SMALL AND MEDIUM SOFTWARE INDUSTRIES IMRAN BASHA
MESOPYME-IEMA SOFTWARE PROCESS EVALUATION MODEL FOR SMALL AND MEDIUM SOFTWARE INDUSTRIES IMRAN BASHA A dissertation submitted in partial fulfillment of the requirements for the award of the degree of Master
CARBON NANOTUBE FIELD-EFFECT TRANSISTOR FOR A LOW NOISE AMPLIFIER NGU KEK SIANG UNIVERSITI TEKNOLOGI MALAYSIA
CARBON NANOTUBE FIELD-EFFECT TRANSISTOR FOR A LOW NOISE AMPLIFIER NGU KEK SIANG UNIVERSITI TEKNOLOGI MALAYSIA CARBON NANOTUBE FIELD-EFFECT TRANSISTOR FOR A LOW NOISE AMPLIFIER NGU KEK SIANG A project report
STRATEGI MENINGKATKAN PENGGUNAAN KONKRIT PRATUANG DI MALAYSIA WAN HANANI BINTI WAN HASSAN
STRATEGI MENINGKATKAN PENGGUNAAN KONKRIT PRATUANG DI MALAYSIA WAN HANANI BINTI WAN HASSAN Laporan projek ini dikemukakan sebagai memenuhi sebahagian daripada syarat penganugerahan Ijazah Sarjana Kejuruteraan
DATA SAMPLING TIME SCHEDULING BASED ON MAXIMUM ALLOWABLE LOOP DELAY FOR NETWORKED CONTROL SYSTEM AMIRA SARAYATI AHMAD DAHALAN
DATA SAMPLING TIME SCHEDULING BASED ON MAXIMUM ALLOWABLE LOOP DELAY FOR NETWORKED CONTROL SYSTEM AMIRA SARAYATI AHMAD DAHALAN UNIVERSITI TEKNOLOGI MALAYSIA DATA SAMPLING TIME SCHEDULING BASED ON MAXIMUM
DESIGN AND ANALYSIS OF WIDEBAND CIRCULARLY POLARIZED DIELECTRIC RESONATOR ANTENNA FOR WIRELESS COMMUNICATION APPLICATIONS
DESIGN AND ANALYSIS OF WIDEBAND CIRCULARLY POLARIZED DIELECTRIC RESONATOR ANTENNA FOR WIRELESS COMMUNICATION APPLICATIONS ALI KHALAJMEHRABADI UNIVERSITI TEKNOLOGI MALAYSIA DESIGN AND ANALYSIS OF WIDEBAND
DESIGN OF A MIMO RECTANGULAR DIELECTRIC RESONATOR ANTENNA FOR LTE APPLICATION
DESIGN OF A MIMO RECTANGULAR DIELECTRIC RESONATOR ANTENNA FOR LTE APPLICATION AMIR MOAZZAMI UNIVERSITI TEKNOLOGI MALAYSIA DESIGN OF A MIMO RECTANGULAR DIELECTRIC RESONATOR ANTENNA FOR LTE APPLICATION AMIR
DUAL BAND APERTURE COUPLED MICROSTRIP PATCH ANTENNA USING DIFFERENT APERTURE SHAPE FOR WIRELESS LAN APPLICATION
DUAL BAND APERTURE COUPLED MICROSTRIP PATCH ANTENNA USING DIFFERENT APERTURE SHAPE FOR WIRELESS LAN APPLICATION MAHER BAHRAM AHMED BAHRAM UNIVERSITI TEKNOLOGI MALAYSIA i DUAL BAND APERTURE COUPLED MICROSTRIP
COMPUTER AIDED APPROACH FOR OCCUPATIONALLY HEALTHIER CHEMICAL PROCESSES ASSESSMENT AND SELECTION SANTHA PANDIAN UNIVERSITI TEKNOLOGI MALAYSIA
1 COMPUTER AIDED APPROACH FOR OCCUPATIONALLY HEALTHIER CHEMICAL PROCESSES ASSESSMENT AND SELECTION SANTHA PANDIAN UNIVERSITI TEKNOLOGI MALAYSIA 4 COMPUTER AIDED APPROACH FOR OCCUPATIONALLY HEALTHIER CHEMICAL
INTEGRATED SYSTEM OF AUTOMATIC IDENTIFICATION SYSTEM (AIS) AND RADAR FOR PORT TRAFFIC MANAGEMENT NUR AIREEN BT. AMRAN UNIVERSITI TEKNOLOGI MALAYSIA
INTEGRATED SYSTEM OF AUTOMATIC IDENTIFICATION SYSTEM (AIS) AND RADAR FOR PORT TRAFFIC MANAGEMENT NUR AIREEN BT. AMRAN UNIVERSITI TEKNOLOGI MALAYSIA INTEGRATED SYSTEM OF AUTOMATIC IDENTIFICATION SYSTEM
PERFORMANCE STUDY OF VIRTUAL FENCING USING WIRELESS SENSING NETWORK CHAN HUI TING UNIVERSITI TEKNOLOGI MALAYSIA
PERFORMANCE STUDY OF VIRTUAL FENCING USING WIRELESS SENSING NETWORK CHAN HUI TING UNIVERSITI TEKNOLOGI MALAYSIA PERFORMANCE STUDY OF VIRTUAL FENCING USING WIRELESS SENSING NETWORK CHAN HUI TING A project
SOFTWARE PROCESS FOR INTEGRATED PATTERN ORIENTED ANALYSIS AND DESIGN (POAD) AND COMPONENT ORIENTED PROGRAMMING (COP) ON EMBEDDED REAL-TIME SYSTEMS
SOFTWARE PROCESS FOR INTEGRATED PATTERN ORIENTED ANALYSIS AND DESIGN (POAD) AND COMPONENT ORIENTED PROGRAMMING (COP) ON EMBEDDED REAL-TIME SYSTEMS SIMBA ANAK BAU` A project report submitted in partial
SYSTEM IDENTIFICATION AND INTELLIGENT CONTROL OF AUTOMOTIVE AIR CONDITIONING SYSTEM. MOHD FIRDAUS BIN MOHAMED
SYSTEM IDENTIFICATION AND INTELLIGENT CONTROL OF AUTOMOTIVE AIR CONDITIONING SYSTEM. MOHD FIRDAUS BIN MOHAMED A project report submitted in partial fulfilment of the requirements for the awards of the
THREE-DIMENSIONAL FINITE-DIFFERENCE TIME-DOMAIN SIMULATION OF COAXIAL TRANSMISSION LINE FOR BROADBAND DIELECTRIC CHARACTERIZATION
THREE-DIMENSIONAL FINITE-DIFFERENCE TIME-DOMAIN SIMULATION OF COAXIAL TRANSMISSION LINE FOR BROADBAND DIELECTRIC CHARACTERIZATION SARIMAH BINTI NOOR AHMAD UNIVERSITI TEKNOLOGI MALAYSIA THREE-DIMENSIONAL
LONG TERM EVOLUTION MULTIMEDIA BROADCAST AND MULTICAST SERVICES IN SINGLE FREQUENCY NETWORK AMIRUDIN IBRAHIM UNIVERSITI TEKNOLOGI MALAYSIA
LONG TERM EVOLUTION MULTIMEDIA BROADCAST AND MULTICAST SERVICES IN SINGLE FREQUENCY NETWORK AMIRUDIN IBRAHIM UNIVERSITI TEKNOLOGI MALAYSIA LONG TERM EVOLUTION MULTIMEDIA BROADCAST AND MULTICAST SERVICES
A 10-BIT 50 MEGA-SAMPLES-PER-SECOND PIPELINED ANALOG-TO-DIGITAL CONVERTER YUZMAN BIN YUSOFF UNIVERSITI TEKNOLOGI MALAYSIA
A 10-BIT 50 MEGA-SAMPLES-PER-SECOND PIPELINED ANALOG-TO-DIGITAL CONVERTER YUZMAN BIN YUSOFF UNIVERSITI TEKNOLOGI MALAYSIA A 10-BIT 50 MEGA-SAMPLES-PER-SECOND PIPELINED ANALOG-TO- DIGITAL CONVERTER YUZMAN
PWM PIC16F877A DIMMING ELECTRONIC BALLAST FOR HPS LAMP NATRA BINTI ISMAIL
i PWM PIC16F877A DIMMING ELECTRONIC BALLAST FOR HPS LAMP NATRA BINTI ISMAIL A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering (Electrical-Power)
FREQUENCY RECONFIGURABLE ARCHIMEDEAN SPIRAL ANTENNA MASMURNI BINTI ABDUL RAHMAN
FREQUENCY RECONFIGURABLE ARCHIMEDEAN SPIRAL ANTENNA MASMURNI BINTI ABDUL RAHMAN A project report submitted in partial fulfilment of the requirements for the award of a degree of Master of Engineering (Electrical-Electronic
PROBABILITY DISTRIBUTION OF RETURNS IN HESTON MODEL FOR INDEX PRICES OF FTSE BURSA MALAYSIA KLCI TEY SEAH YING UNIVERSITI TEKNOLOGI MALAYSIA
PROBABILITY DISTRIBUTION OF RETURNS IN HESTON MODEL FOR INDEX PRICES OF FTSE BURSA MALAYSIA KLCI TEY SEAH YING UNIVERSITI TEKNOLOGI MALAYSIA PROBABILITY DISTRIBUTION OF RETURNS IN HESTON MODEL FOR INDEX
SYSTEM IDENTIFICATION AND CONTROL OF THE HORIZONTAL MOTION OF A TWIN ROTOR MULTI-INPUT MULTI-OUTPUT SYSTEM (TRMS) NURUL HAZIRAH BINTI ABD AZIZ
SYSTEM IDENTIFICATION AND CONTROL OF THE HORIZONTAL MOTION OF A TWIN ROTOR MULTI-INPUT MULTI-OUTPUT SYSTEM (TRMS) NURUL HAZIRAH BINTI ABD AZIZ A project report submitted in fulfilment of the requirements
SELF-TUNING PID CONTROLLER FOR ACTIVATED SLUDGE SYSTEM HUONG PEI CHOO
SELF-TUNING PID CONTROLLER FOR ACTIVATED SLUDGE SYSTEM HUONG PEI CHOO A project report submitted in partial fulfilment of the requirements for the award of the degree of Master of Engineering (Electrical
MITIGATING INTER-CARRIER INTERFERENCE IN ORTHOGONAL FREQUENCY DIVSION MULTIPLEXING SYSTEM USING SCALED ALPHA PULSE SHAPING TECHNIQUE
MITIGATING INTER-CARRIER INTERFERENCE IN ORTHOGONAL FREQUENCY DIVSION MULTIPLEXING SYSTEM USING SCALED ALPHA PULSE SHAPING TECHNIQUE NOR ADIBAH BINTI IBRAHIM UNIVERSITI TEKNOLOGI MALAYSIA MITIGATING INTER-CARRIER
SOCIAL NETWORK SITE APPROPRIATION PROCESSES BASED ON FAMILY TYPES YUZI BINTI MAHMUD
SOCIAL NETWORK SITE APPROPRIATION PROCESSES BASED ON FAMILY TYPES YUZI BINTI MAHMUD A thesis submitted in fulfilment of the requirements for the award of the degree of Doctor of Philosophy (Information
WIRELEES VIBRATION MONITORING SYSTEM (WVMS) WONG YOON KHANG APRIL 2007
WIRELEES VIBRATION MONITORING SYSTEM (WVMS) By WONG YOON KHANG APRIL 2007 ACKNOWLEDGEMENTS It always disturbing when life seems to imitate Engineering. First of all, thank God for letting me complete this
EXPERIMENTAL ANALYSIS OF MACHINING PERFORMANCE BASED ON SELECTED CUTTING PARAMETERS FOR SMART CNC TURNING ENVIRONMENT
EXPERIMENTAL ANALYSIS OF MACHINING PERFORMANCE BASED ON SELECTED CUTTING PARAMETERS FOR SMART CNC TURNING ENVIRONMENT SHUHAIDI BIN MOHAMAD UNIVERSITI TEKNOLOGI MALAYSIA EXPERIMENTAL ANALYSIS OF MACHINING
DETERMINATION OF LEAKAGE IN AN OIL AND GAS PIPELINE NOR AZIAN BINTI MOHIDEEN ABDUL KADIR
DETERMINATION OF LEAKAGE IN AN OIL AND GAS PIPELINE NOR AZIAN BINTI MOHIDEEN ABDUL KADIR A dissertation submitted in partial fulfilment of the requirements for the award of the degree of Master of Science
RESONANT CONTROL OF A FLEXIBLE MANIPULATOR SYSTEM
RESONANT CONTROL OF A FLEXIBLE MANIPULATOR SYSTEM AUWALU MUHAMMAD ABDULLAHI UNIVERSITY TEKNOLOGI MALAYSIA RESONANT CONTROL OF A FLEXIBLE MANIPULATOR SYSTEM AUWALU MUHAMMAD ABDULLAHI A project report submitted
INSULATION COORDINATION OF QUADRUPLE CIRCUIT HIGH VOLTAGE TRANSMISSION LINES USING ATP-EMTP SITI RUGAYAH BTE DUGEL
ii INSULATION COORDINATION OF QUADRUPLE CIRCUIT HIGH VOLTAGE TRANSMISSION LINES USING ATP-EMTP SITI RUGAYAH BTE DUGEL A thesis submitted in partial fulfillment of the requirements for the award of the
THE RELATIONSHIP BETWEEN MARSHALL STABILITY, FLOW AND RUTTING OF THE NEW MALAYSIAN HOT-MIX ASPHALT MIXTURES MUKHTAR ELSEDDIG ABUKHETTALA
THE RELATIONSHIP BETWEEN MARSHALL STABILITY, FLOW AND RUTTING OF THE NEW MALAYSIAN HOT-MIX ASPHALT MIXTURES MUKHTAR ELSEDDIG ABUKHETTALA A project report submitted in partial fulfillment of the requirements
EMBEDDED SYSTEM BASED SOLID-GAS MASS FLOW RATE METER USING OPTICAL TOMOGRAPHY CHIAM KOK THIAM
i EMBEDDED SYSTEM BASED SOLID-GAS MASS FLOW RATE METER USING OPTICAL TOMOGRAPHY CHIAM KOK THIAM A thesis submitted in fulfilment of the requirements for the award of the degree of Master of Engineering
SECURE ON-DEMAND ROUTING PROTOCOL IN WIRELESS SENSOR NETWORKS BASED ON ROUTE WEIGHT AND KNOWLEDGE SHARING ALI FARROKHTALA
SECURE ON-DEMAND ROUTING PROTOCOL IN WIRELESS SENSOR NETWORKS BASED ON ROUTE WEIGHT AND KNOWLEDGE SHARING ALI FARROKHTALA A project report submitted in fulfillment of the requirements for the award of
MODIFIED STEREO VISION METHOD FOR AN UNMANNED GROUND VEHICLE MASOUD SAMADI UNIVERSITI TEKNOLOGI MALAYSIA
MODIFIED STEREO VISION METHOD FOR AN UNMANNED GROUND VEHICLE MASOUD SAMADI UNIVERSITI TEKNOLOGI MALAYSIA MODIFIED STEREO VISION METHOD FOR AN UNMANNED GROUND VEHICLE MASOUD SAMADI A thesis submitted in
EFFECT OF FINENESS COCONUT SHELL CHARCOAL ASH ON THE RHEOLOGICAL PROPERTIES OF BITUMEN NURUL NAJIHAH BINTI MAD ROSNI
iii EFFECT OF FINENESS COCONUT SHELL CHARCOAL ASH ON THE RHEOLOGICAL PROPERTIES OF BITUMEN NURUL NAJIHAH BINTI MAD ROSNI A project report submitted in partial fulfilment of the requirement for the award
FREQUENCY ESTIMATOR USING ARTIFICIAL NEURAL NETWORK FOR ELECTRICAL POWER SYSTEM DYNAMICS AZLIZA BINTI MOHD JELANI UNIVERSITI TEKNOLOGI MALAYSIA
FREQUENCY ESTIMATOR USING ARTIFICIAL NEURAL NETWORK FOR ELECTRICAL POWER SYSTEM DYNAMICS AZLIZA BINTI MOHD JELANI UNIVERSITI TEKNOLOGI MALAYSIA FREQUENCY ESTIMATOR USING ARTIFICIAL NEURAL NETWORK FOR ELECTRICAL
CRASH ANALYSIS OF A RAINFOREST VEHICLE (RFV) UNDER FRONTAL IMPACT LOADING MOHAMAD SYAUQY AMIN BIN OTHMAN
CRASH ANALYSIS OF A RAINFOREST VEHICLE (RFV) UNDER FRONTAL IMPACT LOADING MOHAMAD SYAUQY AMIN BIN OTHMAN A thesis submitted in fulfilment of the requirements for the award of the degree of Master of Mechanical
CONTRIBUTION OF HUMAN FACTORS TO SHIPPING SAFETY ARFENA DEAH LESTARI
CONTRIBUTION OF HUMAN FACTORS TO SHIPPING SAFETY ARFENA DEAH LESTARI A thesis submitted in partial fulfillment of the requirements for the award of the degree of Master of Mechanical Engineering (Marine
DEVELOPMENT OF DYNAMIC EQUIVALENTS FOR INTERCONNECTED POWER SYSTEMS USING IDENTIFICATION APPROACHES KOK BOON CHING UNIVERSITI TEKNOLOGI MALAYSIA
DEVELOPMENT OF DYNAMIC EQUIVALENTS FOR INTERCONNECTED POWER SYSTEMS USING IDENTIFICATION APPROACHES KOK BOON CHING UNIVERSITI TEKNOLOGI MALAYSIA DEVELOPMENT OF DYNAMIC EQUIVALENTS FOR INTERCONNECTED POWER
EVALUATION OF VARIOUS MILLING STRATEGIES IN SUPPORTING ADVANCED CAD/CAM ENVIRONMENT FOR BIOMEDICAL APPLICATIONS
EVALUATION OF VARIOUS MILLING STRATEGIES IN SUPPORTING ADVANCED CAD/CAM ENVIRONMENT FOR BIOMEDICAL APPLICATIONS MOHAMMAD IZAZI BIN IBRAHIM UNIVERSITI TEKNOLOGI MALAYSIA EVALUATION OF VARIOUS MILLING STRATEGIES
AFFINE-BASED TIME-SCALE ULTRA WIDEBAND WIRELESS CHANNEL SIMULATOR FOR TIME-VARYING COMMUNICATION ENVIRONMENT NOR ASWANI BINTI HJ MAMAT
AFFINE-BASED TIME-SCALE ULTRA WIDEBAND WIRELESS CHANNEL SIMULATOR FOR TIME-VARYING COMMUNICATION ENVIRONMENT NOR ASWANI BINTI HJ MAMAT A thesis submitted in fulfilment of the requirements for the award
PREDICTION OF TOTAL CONCENTRATION FOR SPHERICAL AND TEAR SHAPE DROPS BY USING NEURAL NETWORK NORHUSNA BINTI SAHARUN UNIVERSITI TEKNOLOGI MALAYSIA
i PREDICTION OF TOTAL CONCENTRATION FOR SPHERICAL AND TEAR SHAPE DROPS BY USING NEURAL NETWORK NORHUSNA BINTI SAHARUN UNIVERSITI TEKNOLOGI MALAYSIA i PREDICTION OF TOTAL CONCENTRATION FOR SPHERICAL AND
THE MEDIATION EFFECT OF VALUE ON EXPERIENCE AND SERVICE QUALITY TOWARD SATISFACTION IN MALAYSIAN TOURISM INDUSTRY KWOK SEE YING
THE MEDIATION EFFECT OF VALUE ON EXPERIENCE AND SERVICE QUALITY TOWARD SATISFACTION IN MALAYSIAN TOURISM INDUSTRY KWOK SEE YING A thesis submitted in fulfilment of the requirements for the award of the
PARTICLE SWARM OPTIMIZATION FOR MPPT : SIMULATION AND ANALYSIS NOOR DZULAIKHA BINTI DAUD UNIVERSITI TEKNOLOGI MALAYSIA
PARTICLE SWARM OPTIMIZATION FOR MPPT : SIMULATION AND ANALYSIS NOOR DZULAIKHA BINTI DAUD UNIVERSITI TEKNOLOGI MALAYSIA i PARTICLE SWARM OPTIMIZATION FOR MPPT : SIMULATION AND ANALYSIS NOOR DZULAIKHA BINTI
ICT APPLICATION IN ACHIEVING PROJECT SUCCESS: A CASE STUDY OF A CONSTURCTION COMPANY IN MALAYSIA CHUA YONG CHAN
i ICT APPLICATION IN ACHIEVING PROJECT SUCCESS: A CASE STUDY OF A CONSTURCTION COMPANY IN MALAYSIA CHUA YONG CHAN Report submitted in partial fulfilment of the requirements for the award of the degree
ANTENNA ARRAY (DESIGN AT 28 GHz FOR 5G MOBILE NETWORK BASIL JABIR SHANSHOOL. A project submitted in partial fulfilment of the
ANTENNA ARRAY (DESIGN AT 28 GHz FOR 5G MOBILE NETWORK BASIL JABIR SHANSHOOL A project submitted in partial fulfilment of the requirements for the award of the degree of Masters of Engineering (Electrical