TUTORIAL on the Industrialization of MEMS

Size: px
Start display at page:

Download "TUTORIAL on the Industrialization of MEMS"

Transcription

1 Munich Germany September 2007 TUTORIAL on the Industrialization of MEMS Date: Monday, September 10 th, 2007 Venue: Organizer: TU München, Main Campus, Arcisstrasse 21, München Werner Weber, Infineon Technologies, Munich, Germany Micro-Electro-Mechanical Systems (MEMS) have been a research focus in academia and industry since many years. A few years ago a disillusionment occurred, caused by the difficulty in creating profitable businesses. As a consequence many industrial firms backed out of the field. More recently, however, several examples of successful industrializations of MEMS appeared and carried major encouragement into the research community. This shortcourse addresses some of those successful examples and elaborates on the methods for successful exploitation of MEMS developments. The first presentation by Werner Weber will introduce the field and give the general framework. The second presentation by Lüder Elbrecht talks about the Bulk Acoustic Wave devices for filters and resonators which is the story of a MEMS device made successful by the modern communication systems. The third presentation by Jiri Marek will talk about acceleration and gyro sensors which are used in most modern automobiles. Then Trond Westgaard will talk about the Tire Pressure Monitoring Sensor which became successful on the markets only recently. The fifth presentation by Michele Palmieri will depict the fluidic interaction with MEMS devices and span from inkjet printer heads to medical/bio applications. The last presentation is devoted to the famous Digital Light Projection device and will be presented by Mike Douglass.

2 Agenda: Time Topic Speaker 10:00 Introduction and Overview 10:30 Bulk Acoustic Wave Devices Werner Weber, Infineon Technologies, Munich, Germany Lüder Elbrecht, Infineon Technologies, Munich, Germany 11:15 Coffee Break 11:45 Tire Pressure Monitoring Systems Trond Westgaard, Infineon Technologies SensoNor, Horten, Norway 12:30 Lunch 14:00 Acceleration and Gyro Sensors for Automotive Applications Jiri Marek, U.-M. Gómez, Bosch GmbH, Reutlingen, Germany 14:45 Coffee Break 15:15 From inkjet printer heads to medical/bio applications Michele Palmieri, ST, Agrate, Italy 16:00 Development and Commercialization of DLP Technology Mike Douglass, TI, Plano, Tx, USA 16:45 Panel on the MEMS innovation process in the industry and possible future developments 18:00 Adjourn

3 Abstracts: Introduction and Overview Werner Weber, Infineon Technologies, Munich, Germany Micro-Electro-Mechanical Systems (MEMS) have been a research focus in academia and industry since many years. Recently several examples of successful industrializations of MEMS appeared and carried major encouragement into the research community. This presentation plans to give a short overview both on the technical concepts used today and provide information about important technical and economic trends in this field. Besides the topics discussed in this workshop also other important MEMS architectures such as Read/Write heads, and image sensors will be introduced. Bulk Acoustic Wave Devices Lüder Elbrecht, Infineon Technologies, Munich, Germany Although the basic ideas of the Bulk Acoustic Wave (BAW) device for radio frequency applications were formulated more than 50 years ago, the first highvolume commercialization of this technology was successful only at the beginning of this century. In this presentation, we review the enablers and inhibitors for the industrialization of these high-q vibrating MEMS devices. Tire Pressure Monitoring Systems Trond Westgaard, Infineon Technologies SensoNor, Horten, Norway MEMS based TPMS (Tire pressure monitoring systems) wheel modules provide direct and exact information on pressure and temperature from the tire to the vehicle s electronic systems. This service is provided over a wide temperature range and in the extreme mechanical conditions present in a tire, where static loads can exceed 2000 g. Direct wiring from the vehicle to the wheel assembly is impractical here. As a consequence data from the TPMS module have to be communicated through built-in RF functionality, which in turn demands minimal energy consumption of the electronic components. The presentation will address the features of MEMS-based TPMS modules that satisfy the automotive requirements of robustness and minimized energy consumption.

4 Acceleration and Gyro Sensors for Automotive Applications Jiri Marek, U.-M. Gómez, Bosch GmbH, Reutlingen, Germany Bosch has been a supplier for MEMS automotive sensors for more than a decade. After starting in the early 90s with some ground-lying basic technology development (the Bosch process for DRIE, release etch technology, and others), Bosch introduced pressure sensors, air mass flow sensors, accelerometers, and gyroscopes into the automotive industry. These MEMS products have become enablers for many advanced automotive systems that make cars safe, clean, and economical: advanced fuel injection systems for engine management, passive and active safety systems, climate control systems, navigation, and others. This talk reviews the key role of MEMS technology products specifically acceleration and gyro sensors for the progress of automotive electronics and gives an outlook for their use in a world of applications in the consumer electronics industry. From inkjet printer heads to medical/bio applications Michele Palmieri, ST, Agrate, Italy Since its birth in the late 70s early 80s the InkJet technology in its various forms and embodiments has been one of the most successful innovation story, disrupting established markets and enabling new applications and businesses that have become so pervasive in our everyday life. Undoubtedly a key element of success has been the ability of design and industrialize complex print-heads in a large manufacturing scale, at the heart of the head there is chip, whose ability of combining electronics with fluidics at the microscale, makes it one of the most pervasive MEMS device in the industry. These unique feature of combining in a highly controllable way electrical functions with fluidic, thermal and mechanical, has proven to be a solid ground on which many other applications may strive. Optical switching, liquid spray, drug delivery, lab-on-chip for biological application and molecular diagnostics are examples of this MEMS family potential. In the last decade ST has become a world leader in the microfluidics MEMS and is now pursuing new application developments in the medical field. By the introduction of In-Check TM platform ST in entering in the fast growing molecular diagnostics field, enabling an unprecedented level of integration of DNA manipulation, PCR and Microarray technologies. In this case a new set of challenges is being faced, namely the integration and interaction of the chip micro-system with biological molecules and functionalities. The speech will cover challenges and opportunities of microfluidics MEMS in this new sectors.

5 Development and Commercialization of DLP Technology Mike Douglass, TI, Plano, Tx, USA The Digital Micromirror Device (DMD) developed by Texas Instruments has made tremendous progress in both performance and reliability since it was first invented in From the first working concept of a bistable mirror, the DMD is now providing high-brightness, high-contrast, and high-reliability in over 10,000,000 projectors and televisions using DLP technology. In recent years, the DMD has achieved the status of being a commercially successful MEMS device. The knowledge we gained through our characterization and testing helped us achieve this success. The performance of our production DMD has achieved, and in some cases exceeded, our reliability and performance goals. This presentation will discuss the metrology developed for the DMD, accelerated stress testing techniques, environmental testing, unique DMD life tests, packaging, modeling, status of DLP Products as a business and future trends.

MEMS Sensors: From Automotive. CE Applications. MicroNanoTec Forum Innovations for Industry April 19 th Hannover, Germany

MEMS Sensors: From Automotive. CE Applications. MicroNanoTec Forum Innovations for Industry April 19 th Hannover, Germany MEMS Sensors: From Automotive to CE Applications MicroNanoTec Forum Innovations for Industry 2010 April 19 th Hannover, Germany Oliver Schatz, CTO 1 Engineering April 2010 GmbH 2009. All rights reserved,

More information

Industrialization of Micro-Electro-Mechanical Systems. Werner Weber Infineon Technologies

Industrialization of Micro-Electro-Mechanical Systems. Werner Weber Infineon Technologies Industrialization of Micro-Electro-Mechanical Systems Werner Weber Infineon Technologies Semiconductor-based MEMS market MEMS Market 2004 (total 22.7 BUS$) Others mostly Digital Light Projection IR Sensors

More information

Introduction to Microdevices and Microsystems

Introduction to Microdevices and Microsystems PHYS 534 (Fall 2008) Module on Microsystems & Microfabrication Lecture 1 Introduction to Microdevices and Microsystems Srikar Vengallatore, McGill University 1 Introduction to Microsystems Outline of Lecture

More information

EE C245 ME C218 Introduction to MEMS Design Fall 2007

EE C245 ME C218 Introduction to MEMS Design Fall 2007 EE C245 ME C218 Introduction to MEMS Design Fall 2007 Prof. Clark T.-C. Nguyen Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley Berkeley, CA 94720 Lecture 1: Definition

More information

MEMS Sensors as enablers for IoTS Shanghai, 17 th of March 2014 百里博 / Leopold Beer Regional President Asia Pacific

MEMS Sensors as enablers for IoTS Shanghai, 17 th of March 2014 百里博 / Leopold Beer Regional President Asia Pacific - The MEMS Technology Leader MEMS Sensors as enablers for IoTS Shanghai, 17 th of March 2014 百里博 / Leopold Beer Regional President Asia Pacific 1 Marketing 17/03/2014 GmbH 2013. All rights reserved, also

More information

MEMS som byggeklossett SensoNor perspektiv

MEMS som byggeklossett SensoNor perspektiv MEMS som byggeklossett SensoNor perspektiv 14. mai 2009 SensoNor Technologies AS CTO Terje Kvisterøy Hva er viktig? Hva er tilgjengelig? SensoNor Technologies AS MEMS all the way! Akers Elektronikk (later

More information

Study of MEMS Devices for Space Applications ~Study Status and Subject of RF-MEMS~

Study of MEMS Devices for Space Applications ~Study Status and Subject of RF-MEMS~ Study of MEMS Devices for Space Applications ~Study Status and Subject of RF-MEMS~ The 26 th Microelectronics Workshop October, 2013 Maya Kato Electronic Devices and Materials Group Japan Aerospace Exploration

More information

RF MEMS Simulation High Isolation CPW Shunt Switches

RF MEMS Simulation High Isolation CPW Shunt Switches RF MEMS Simulation High Isolation CPW Shunt Switches Authored by: Desmond Tan James Chow Ansoft Corporation Ansoft 2003 / Global Seminars: Delivering Performance Presentation #4 What s MEMS Micro-Electro-Mechanical

More information

Advancing MEMS R&D in materials, processes and devices to face major needs arising from the booming MEMS market

Advancing MEMS R&D in materials, processes and devices to face major needs arising from the booming MEMS market Advancing MEMS R&D in materials, processes and devices to face major needs arising from the booming MEMS market Dr Julien Arcamone MEMS Business development Manager, CEA-LETI julien.arcamone@cea.fr MEMS

More information

MEMS in ECE at CMU. Gary K. Fedder

MEMS in ECE at CMU. Gary K. Fedder MEMS in ECE at CMU Gary K. Fedder Department of Electrical and Computer Engineering and The Robotics Institute Carnegie Mellon University Pittsburgh, PA 15213-3890 fedder@ece.cmu.edu http://www.ece.cmu.edu/~mems

More information

the world leader in metrology of piezoelectrics expanding into new areas!

the world leader in metrology of piezoelectrics expanding into new areas! aixacct Systems GmbH Talbotstr. 25 52068 Aachen Germany Phone: +49 (0) 241-47 57 03 0 Fax: +49 (0) 241-47 57 03 66 www.aixacct.com info@aixacct.com Welcome to aixacct Systems, the world leader in metrology

More information

Recent Innovations in MEMS Sensors for PNT Applications

Recent Innovations in MEMS Sensors for PNT Applications Recent Innovations in MEMS Sensors for PNT Applications Stanford PNT Symposium 2017 Alissa M. Fitzgerald, Ph.D. Founder & CEO amf@amfitzgerald.com Overview Navigation Developments in MEMS gyroscope technology

More information

EE C245 ME C218 Introduction to MEMS Design

EE C245 ME C218 Introduction to MEMS Design EE C245 ME C218 Introduction to MEMS Design Fall 2008 Prof. Clark T.-C. Nguyen Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley Berkeley, CA 94720 Lecture 1: Definition

More information

MEMS Technology Roadmapping

MEMS Technology Roadmapping MEMS Technology Roadmapping Michael Gaitan, NIST Chair, inemi and ITRS MEMS Technology Working Groups Nano-Tec Workshop 3 31 May 2012 MEMS Technology Working Group More than Moore White Paper, http://www.itrs.net

More information

EE C245 ME C218 Introduction to MEMS Design Fall 2010

EE C245 ME C218 Introduction to MEMS Design Fall 2010 Instructor: Prof. Clark T.-C. Nguyen EE C245 ME C218 Introduction to MEMS Design Fall 2010 Prof. Clark T.-C. Nguyen Dept. of Electrical Engineering & Computer Sciences University of California at Berkeley

More information

SmartSenseCom Introduces Next Generation Seismic Sensor Systems

SmartSenseCom Introduces Next Generation Seismic Sensor Systems SmartSenseCom Introduces Next Generation Seismic Sensor Systems Summary: SmartSenseCom, Inc. (SSC) has introduced the next generation in seismic sensing technology. SSC s systems use a unique optical sensing

More information

Glenn G. Daves. Director, Packaging Solutions Development Freescale Semiconductor, Inc.

Glenn G. Daves. Director, Packaging Solutions Development Freescale Semiconductor, Inc. Glenn G. Daves Director, Packaging Solutions Development Freescale Semiconductor, Inc. Freescale, the Freescale logo, AltiVec, C-5, CodeTEST, CodeWarrior, ColdFire, C-Ware, t he Energy Efficient Solutions

More information

50 YEARS SUSS MASK ALIGNER

50 YEARS SUSS MASK ALIGNER 50 YEARS SUSS MASK ALIGNER Ralph Zoberbier SUSS MicroTec Lithography GmbH Germany Published in the SUSS report 01/2013 E-mail: info@suss.com www.suss.com 50 YEARS SUSS MASK ALIGNER Ralph Zoberbier SUSS

More information

Surface Micromachining

Surface Micromachining Surface Micromachining An IC-Compatible Sensor Technology Bernhard E. Boser Berkeley Sensor & Actuator Center Dept. of Electrical Engineering and Computer Sciences University of California, Berkeley Sensor

More information

Faculty Development Program on Micro-Electro-Mechanical Systems (MEMS Sensor)

Faculty Development Program on Micro-Electro-Mechanical Systems (MEMS Sensor) Faculty Development Program on Micro-Electro-Mechanical Systems (MEMS Report MEMS sensors have been dominating the consumer products such as mobile phones, music players and other portable devices. With

More information

COMPUTER TO SCREEN. PDS International Limited

COMPUTER TO SCREEN. PDS International Limited Recently I have been involved extensively in digital printing technology and I am concerned with what I see. Potential users do not understand their options and consequently can make uneducated buying

More information

Fachbereich Informatik und Elektrotechnik Ubicomp. Ubiquitous Computing. Ubiquitous Computing, Helmut Dispert

Fachbereich Informatik und Elektrotechnik Ubicomp. Ubiquitous Computing. Ubiquitous Computing, Helmut Dispert Ubicomp Ubiquitous Computing Ubicomp Ubiquitous Computing PicoCube Concept e-cube Concept Ubicomp Picocube: A 1cm3 Sensor Node Powered by Harvested Energy Yuen-Hui Chee, Mike Koplow, Michael Mark, Nathan

More information

SCME s Microsystems and MEMS Educational Resources

SCME s Microsystems and MEMS Educational Resources SCME s Microsystems and MEMS Educational Resources Dr. Matthias Pleil University of New Mexico, Albuquerque, NM Made possible through a grant from the National Science Foundation DUE 1205138 MEMS in STEM

More information

Factsheet Information for exhibitors / 2019

Factsheet Information for exhibitors / 2019 Connecting Global Competence Factsheet Information for exhibitors / 2019 Planet e: Bringing the future to the world. International Trade Fair for Electronic Components, Systems and Applications Shanghai

More information

3D Optical Motion Analysis of Micro Systems. Heinrich Steger, Polytec GmbH, Waldbronn

3D Optical Motion Analysis of Micro Systems. Heinrich Steger, Polytec GmbH, Waldbronn 3D Optical Motion Analysis of Micro Systems Heinrich Steger, Polytec GmbH, Waldbronn SEMICON Europe 2012 Outline Needs and Challenges of measuring Micro Structure and MEMS Tools and Applications for optical

More information

MEMS Solutions For VR & AR

MEMS Solutions For VR & AR MEMS Solutions For VR & AR Sensor Expo 2017 San Jose June 28 th 2017 MEMS Sensors & Actuators at ST 2 Motion Environmental Audio Physical change Sense Electro MEMS Mechanical Signal Mechanical Actuate

More information

Triple i - The key to your success

Triple i - The key to your success Triple i - The key to your success The needs and challenges of today s world are becoming ever more demanding. Standards are constantly rising. Creativity, reliability and high performance are basic prerequisites

More information

Design and simulation of MEMS piezoelectric gyroscope

Design and simulation of MEMS piezoelectric gyroscope Available online at www.scholarsresearchlibrary.com European Journal of Applied Engineering and Scientific Research, 2014, 3 (2):8-12 (http://scholarsresearchlibrary.com/archive.html) ISSN: 2278 0041 Design

More information

Des MEMS aux NEMS : évolution des technologies et des concepts aux travers des développements menés au LETI

Des MEMS aux NEMS : évolution des technologies et des concepts aux travers des développements menés au LETI Des MEMS aux NEMS : évolution des technologies et des concepts aux travers des développements menés au LETI Ph. Robert 1 Content LETI at a glance From MEMS to NEMS: 30 years of technological evolution

More information

FROM RESEARCH TO INDUSTRY INTRODUCTION II MEMS IN HORTEN

FROM RESEARCH TO INDUSTRY INTRODUCTION II MEMS IN HORTEN FROM RESEARCH TO INDUSTRY Terje Kvisterøy 1 1 SensoNor AS, An Infineon Technologies Company, Knudsrødveien 7, 3192 Horten, Norway terje.kvisteroey@sensonor.no Abstract Today SensoNor is a major supplier

More information

The Automotive Council Managing the Automotive Transformation

The Automotive Council Managing the Automotive Transformation The Automotive Council Managing the Automotive Transformation Dr. Graham Hoare Ford Motor Company Chair Automotive Council Technology Group AESIN Conference 20 th October 2016 www.automotivecouncil.co.uk

More information

National Centre for Flexible Electronics

National Centre for Flexible Electronics National Centre for Flexible Electronics Tripartite Partnership Government FlexE Centre - A platform for a meaningful interaction between industry and academia. An interdisciplinary team that advances

More information

One Display for a Cockpit Interactive Solution: The Technology Challenges

One Display for a Cockpit Interactive Solution: The Technology Challenges One Display for a Cockpit Interactive Solution: The Technology Challenges A. Xalas, N. Sgouros, P. Kouros, J. Ellinas Department of Electronic Computer Systems, Technological Educational Institute of Piraeus,

More information

Beam Shaping Excellence

Beam Shaping Excellence Beam Shaping Excellence 300 patents 200 employees 13 countries 2 Every photon. In the right place, at the right time. LIMO: The world of beam shaping Whether it's materials processing, illumination or

More information

ASC IMU 7.X.Y. Inertial Measurement Unit (IMU) Description.

ASC IMU 7.X.Y. Inertial Measurement Unit (IMU) Description. Inertial Measurement Unit (IMU) 6-axis MEMS mini-imu Acceleration & Angular Rotation analog output 12-pin connector with detachable cable Aluminium housing Made in Germany Features Acceleration rate: ±2g

More information

Technology Characterization, Technology Mind-Mapping and Value Proposition Towards Commercialization

Technology Characterization, Technology Mind-Mapping and Value Proposition Towards Commercialization Technology Characterization, Technology Mind-Mapping and Value Proposition Towards Commercialization Surya Raghu Advanced Fluidics & ET Cube International WIPO EIE Project National Workshop 1 Bangkok,

More information

Emerging MEMS & Sensor Technologies to Watch: Alissa M. Fitzgerald, Ph.D., Founder & CEO Semicon West 2018

Emerging MEMS & Sensor Technologies to Watch: Alissa M. Fitzgerald, Ph.D., Founder & CEO Semicon West 2018 Emerging MEMS & Sensor Technologies to Watch: 2018 Alissa M. Fitzgerald, Ph.D., Founder & CEO amf@amfitzgerald.com Outline About AMFitzgerald What emerging means in this presentation Emerging MEMS & sensor

More information

The Advantages of Integrated MEMS to Enable the Internet of Moving Things

The Advantages of Integrated MEMS to Enable the Internet of Moving Things The Advantages of Integrated MEMS to Enable the Internet of Moving Things January 2018 The availability of contextual information regarding motion is transforming several consumer device applications.

More information

Academic Course Description SRM University Faculty of Engineering and Technology Department of Electronics and Communication Engineering

Academic Course Description SRM University Faculty of Engineering and Technology Department of Electronics and Communication Engineering Academic Course Description SRM University Faculty of Engineering and Technology Department of Electronics and Communication Engineering EC0032 Introduction to MEMS Eighth semester, 2014-15 (Even Semester)

More information

Satellite Testing. Prepared by. A.Kaviyarasu Assistant Professor Department of Aerospace Engineering Madras Institute Of Technology Chromepet, Chennai

Satellite Testing. Prepared by. A.Kaviyarasu Assistant Professor Department of Aerospace Engineering Madras Institute Of Technology Chromepet, Chennai Satellite Testing Prepared by A.Kaviyarasu Assistant Professor Department of Aerospace Engineering Madras Institute Of Technology Chromepet, Chennai @copyright Solar Panel Deployment Test Spacecraft operating

More information

A Modular and Generic Virtual Reality Training Framework for Micro-Robotic Cell Injection Systems

A Modular and Generic Virtual Reality Training Framework for Micro-Robotic Cell Injection Systems A Modular and Generic Virtual Reality Training Framework for Micro-Robotic Cell Injection Systems N. Kamal, Z. A. Khan, A. Hameed, and O. Hasan National University of Sciences and Technology (NUST), Pakistan

More information

www.thomas-magnete.com History of the Company Milestones Thomas Magnete founded by Hermann Thomas Development of first proportional solenoid for hydraulic applications Thomas becomes an independent German

More information

CMP for More Than Moore

CMP for More Than Moore 2009 Levitronix Conference on CMP Gerfried Zwicker Fraunhofer Institute for Silicon Technology ISIT Itzehoe, Germany gerfried.zwicker@isit.fraunhofer.de Contents Moore s Law and More Than Moore Comparison:

More information

SMART SENSORS AND MEMS

SMART SENSORS AND MEMS 2 SMART SENSORS AND MEMS Dr. H. K. Verma Distinguished Professor (EEE) Sharda University, Greater Noida (Formerly: Deputy Director and Professor of Instrumentation Indian Institute of Technology Roorkee)

More information

SEMI Connects: An Overview of SEMI Worldwide. Theresia Fasinski - Manager Membership Relations, SEMI Europe

SEMI Connects: An Overview of SEMI Worldwide. Theresia Fasinski - Manager Membership Relations, SEMI Europe SEMI Connects: An Overview of SEMI Worldwide Theresia Fasinski - Manager Membership Relations, SEMI Europe SEMI Connects to Advance a Global Industry Mission SEMI provides industry stewardship and engages

More information

MAGNATEST D. Magneto-Inductive Component Testing for Magnetic and Electrical Properties

MAGNATEST D. Magneto-Inductive Component Testing for Magnetic and Electrical Properties MAGNATEST D Magneto-Inductive Component Testing for Magnetic and Electrical Properties COMPONENT TESTING (CT) The Company FOERSTER is a global technology leader for non-destructive testing of metallic

More information

1.1 PHILOSOPHY OF MICRO/NANOFABRICATION

1.1 PHILOSOPHY OF MICRO/NANOFABRICATION CHAPTER Introduction 1 C H A P T E R C O N T E N T S 1.1 Philosophy of Micro/Nanofabrication... 1 1.2 The Industry Science Dualism... 5 1.3 Industrial Applications... 8 1.4 Purpose and Organization of

More information

Handling, soldering & mounting instructions

Handling, soldering & mounting instructions Triaxial, digital gyroscopic sensors: Document revision 1.0 Document release date 13 July 2012 Document number Technical reference code(s) Notes BST-MGS-HS000-01 0 273 142 007 Data in this document are

More information

fluidic factory preview» preview» preview modular 3D printer for fluidically sealed devices Microfluidic devices in minutes for as little as $1 each

fluidic factory preview» preview» preview modular 3D printer for fluidically sealed devices Microfluidic devices in minutes for as little as $1 each fluidic factory modular 3D printer for fluidically sealed devices preview» preview» preview Microfluidic devices in minutes for as little as $1 each fluidic factory» overview Fluidic Factory is the world

More information

Controlling vehicle functions with natural body language

Controlling vehicle functions with natural body language Controlling vehicle functions with natural body language Dr. Alexander van Laack 1, Oliver Kirsch 2, Gert-Dieter Tuzar 3, Judy Blessing 4 Design Experience Europe, Visteon Innovation & Technology GmbH

More information

Sandboxing Wireless/RF Vulnerability Research of Connected Systems

Sandboxing Wireless/RF Vulnerability Research of Connected Systems 1 Sandboxing Wireless/RF Vulnerability Research of Connected Systems Michael Calabro 5 October 2016 33rd Annual International Test and Evaluation Symposium Outline What is Wireless Motivating Wireless

More information

NanoFabrication Kingston. Seminar and Webinar January 31, 2017 Rob Knobel Associate Professor, Dept. of Physics Queen s University

NanoFabrication Kingston. Seminar and Webinar January 31, 2017 Rob Knobel Associate Professor, Dept. of Physics Queen s University NanoFabrication Kingston Seminar and Webinar January 31, 2017 Rob Knobel Associate Professor, Dept. of Physics Queen s University What is NFK? It s a place, an team of experts and a service. The goal of

More information

Low-Cost Far-Infrared FPA based on High-Volume Pressure Sensor Process

Low-Cost Far-Infrared FPA based on High-Volume Pressure Sensor Process Low-Cost Far-Infrared FPA based on High-Volume Pressure Sensor Process Michael Krueger 1, Ingo Herrmann 1 Robert Bosch GmbH - Automotive Electronics, Tuebinger Str. 13, D-776 Reutlingen, Germany, michael.krueger@de.bosch.com

More information

Integrated Dual-Axis Gyro IDG-1004

Integrated Dual-Axis Gyro IDG-1004 Integrated Dual-Axis Gyro NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE IDG-25 FOR A FUTIONALLY- UPGRADED PRODUCT APPLICATIONS GPS Navigation Devices Robotics Electronic Toys Platform Stabilization

More information

electronics for computer engineering (Sensor) by KrisMT Computer Engineering, ICT, University of Phayao

electronics for computer engineering (Sensor) by KrisMT Computer Engineering, ICT, University of Phayao 305222 electronics for computer engineering (Sensor) by KrisMT Computer Engineering, ICT, University of Phayao ห วข อ Sensor =? Each type of sensor Technology Interpolation Sensor =? is a device that measures

More information

Applications. Applications

Applications. Applications Applications Marc Madou UC Irvine Dept. of Mechanical and Aerospace Engineering April 22, 2005 Chapter 6 Non-Lithography Applications Fraunhofer Gesellschaft Institute for Production Systems and Design

More information

Handling, soldering & mounting instructions

Handling, soldering & mounting instructions Handling, soldering & mounting instructions Triaxial acceleration sensors: Document revision 1.3 Document release date 08 July 2013 Document number BST-MAS-HS000-03 Technical reference code(s) Notes 0

More information

Material and Package Reliability Needs/Challenges for Harsh Environments. May 30, 2017 ECTC Special Session

Material and Package Reliability Needs/Challenges for Harsh Environments. May 30, 2017 ECTC Special Session Material and Package Reliability Needs/Challenges for Harsh Environments May 30, 2017 ECTC Special Session IEEE 67 th ECTC Orlando, FL, USA May 30 June 2, 2017 IEEE 67 th ECTC Orlando, FL, USA May 30 June

More information

Face the future of manufacturing. Visitor information

Face the future of manufacturing. Visitor information Connecting Global Competence Face the future of manufacturing Visitor information The Leading Exhibition for Smart Automation and Robotics June 19 22, 2018 Munich automatica-munich.com automatica. Our

More information

Reducing MEMS product development and commercialization time

Reducing MEMS product development and commercialization time Reducing MEMS product development and commercialization time Introduction Fariborz Maseeh, Andrew Swiecki, Nora Finch IntelliSense Corporation 36 Jonspin Road, Wilmington MA 01887 www.intellisense.com

More information

Handling, soldering & mounting instructions

Handling, soldering & mounting instructions Multiple inertial measurement units: Document revision 1.2 Document release date January 2018 Document number BST-MIS-HS000-01 Technical reference code Notes 0 273 141 134 0 273 141 221 0 273 141 365 0

More information

Reference Diagram IDG-300. Coriolis Sense. Low-Pass Sensor. Coriolis Sense. Demodulator Y-RATE OUT YAGC R LPY C LPy ±10% EEPROM TRIM.

Reference Diagram IDG-300. Coriolis Sense. Low-Pass Sensor. Coriolis Sense. Demodulator Y-RATE OUT YAGC R LPY C LPy ±10% EEPROM TRIM. FEATURES Integrated X- and Y-axis gyro on a single chip Factory trimmed full scale range of ±500 /sec Integrated low-pass filters High vibration rejection over a wide frequency range High cross-axis isolation

More information

PROBLEM SET #7. EEC247B / ME C218 INTRODUCTION TO MEMS DESIGN SPRING 2015 C. Nguyen. Issued: Monday, April 27, 2015

PROBLEM SET #7. EEC247B / ME C218 INTRODUCTION TO MEMS DESIGN SPRING 2015 C. Nguyen. Issued: Monday, April 27, 2015 Issued: Monday, April 27, 2015 PROBLEM SET #7 Due (at 9 a.m.): Friday, May 8, 2015, in the EE C247B HW box near 125 Cory. Gyroscopes are inertial sensors that measure rotation rate, which is an extremely

More information

WE ARE PART OF THE FUTURE CAR

WE ARE PART OF THE FUTURE CAR Innovation Matters WE ARE PART OF THE FUTURE CAR Elmos develops, produces and markets semiconductors and sensors. For over 30 years, Elmos innovations have been bringing new functions to life and making

More information

Hermetic Packaging Solutions using Borosilicate Glass Thin Films. Lithoglas Hermetic Packaging Solutions using Borosilicate Glass Thin Films

Hermetic Packaging Solutions using Borosilicate Glass Thin Films. Lithoglas Hermetic Packaging Solutions using Borosilicate Glass Thin Films Hermetic Packaging Solutions using Borosilicate Glass Thin Films 1 Company Profile Company founded in 2006 ISO 9001:2008 qualified since 2011 Headquarters and Production in Dresden, Germany Production

More information

CSIR R&D in emerging manufacturing technologies. Dr Neil Trollip

CSIR R&D in emerging manufacturing technologies. Dr Neil Trollip CSIR R&D in emerging manufacturing technologies Dr Neil Trollip Tesla Production Line State of SA Manufacturing sector CSIR Vision: Catalyse re-industrialisation Technologies driving FIR / NIR Fourth Industrial

More information

The word ergonomics implies the study of man at work while the word human factors implies the study of man in relation to equipment and environment.

The word ergonomics implies the study of man at work while the word human factors implies the study of man in relation to equipment and environment. Gavriel Salvendy (1985) The word ergonomics implies the study of man at work while the word human factors implies the study of man in relation to equipment and environment. History of Human Factors Roman

More information

IBM Research Zurich. A Strategy of Open Innovation. Dr. Jana Koehler, Manager Business Integration Technologies. IBM Research Zurich

IBM Research Zurich. A Strategy of Open Innovation. Dr. Jana Koehler, Manager Business Integration Technologies. IBM Research Zurich IBM Research Zurich A Strategy of Open Innovation Dr., Manager Business Integration Technologies IBM A Century of Information Technology Founded in 1911 Among the leaders in the IT industry in every decade

More information

shaping global nanofuture ULTRA-PRECISE PRINTING OF NANOMATERIALS

shaping global nanofuture ULTRA-PRECISE PRINTING OF NANOMATERIALS shaping global nanofuture ULTRA-PRECISE PRINTING OF NANOMATERIALS WHO ARE WE? XTPL S.A. is a company operating in the nanotechnology segment. The interdisciplinary team of XTPL develops on a global scale

More information

3D and Aerosol Printed Conductor Dielectric Full- 3D RF Metamaterials

3D and Aerosol Printed Conductor Dielectric Full- 3D RF Metamaterials 3D and Aerosol Printed Conductor Dielectric Full- 3D RF Metamaterials June 22, 2017 Jimmy Hester, Evan Nguyen, Jesse Tice, and Vesna Radisic Approved for Public Release: NG17-1180, 6/2/17 Outline Introduction

More information

ICU News Flash. ICU consortium. Infrared Imaging Components for Use in Automotive Safety Applications (ICU)

ICU News Flash. ICU consortium. Infrared Imaging Components for Use in Automotive Safety Applications (ICU) We would welcome your opinion and comments at the contact option on ICU s website ICU News Flash Infrared Imaging Components for Use in Automotive Safety Applications (ICU) Co-financed by the EC D e a

More information

INTERNATIONAL JOURNAL OF APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY

INTERNATIONAL JOURNAL OF APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY Research Article Soujanya MG,, 2012; Volume 1(5): 1-12 ISSN: 2319-507X INTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY A PATH FOR HORIZING YOUR INNOVATIVE WORK APPLICATIONS

More information

TESA HITE - TESA MICRO-HITE

TESA HITE - TESA MICRO-HITE CASE STUDY TESA HITE - TESA MICRO-HITE Meggitt Villars-sur-Glâne Switzerland Meggitt plays the Ace for quality assurance A winning combination of speed and precision TESA HITE and TESA MICRO-HITE are tried

More information

MEMS Sensor Elements and their Fabrication

MEMS Sensor Elements and their Fabrication MEMS Sensor Elements and their Fabrication Dr.-Ing. Detlef Billep Page 1 Content 1. The Fraunhofer-Gesellschaft and / ZfM 2. MEMS Inertial Sensors 3. MEMS Design 4. Fabrication Technology 5. Characterization

More information

Nanotechnology, the infrastructure, and IBM s research projects

Nanotechnology, the infrastructure, and IBM s research projects Nanotechnology, the infrastructure, and IBM s research projects Dr. Paul Seidler Coordinator Nanotechnology Center, IBM Research - Zurich Nanotechnology is the understanding and control of matter at dimensions

More information

Garching/Munich,

Garching/Munich, Launch of the Digital Hub Mobility Unique collaboration between automobile companies and mobility providers, suppliers, science and the digital sector for the mobility of the future Garching/Munich, 23.02.2017

More information

Motion Reference Units

Motion Reference Units Motion Reference Units MRU Datasheet Rev. 1.3 IP-67 sealed 5% / 5 cm Heave accuracy 0.03 m/sec Velocity accuracy 0.05 deg Pitch and Roll accuracy 0.005 m/sec2 Acceleration accuracy 0.0002 deg/sec Angular

More information

Motion Reference Units

Motion Reference Units Motion Reference Units MRU IP-67 sealed 5% / 5 cm Heave accuracy 0.03 m/sec Velocity accuracy 0.05 deg Pitch and Roll accuracy 0.005 m/sec 2 Acceleration accuracy 0.0002 deg/sec Angular rate accuracy NMEA

More information

Michelin Challenge Bibendum 2014

Michelin Challenge Bibendum 2014 Michelin Challenge Bibendum 2014 CONTENT CHALLENGE BIBENDUM THINK & ACTION TANK TO HELP TRANSFORM MOBILITY Mobility challenges What is Challenge Bibendum The evolutions of Challenge Bibendum CHALLENGE

More information

COVER STORY. how this new architecture will help carmakers master the complexity of autonomous driving.

COVER STORY. how this new architecture will help carmakers master the complexity of autonomous driving. COVER STORY Semiconductors NXP ESTABLISHED AND NEW PLAYERS The era of self-driving cars places semiconductor companies at the center of important discussions about standards, methodologies, and design

More information

Wireless Sensor Networks for Aerospace Applications

Wireless Sensor Networks for Aerospace Applications SAE 2017 Aerospace Standards Summit th 25-26 April 2017, Cologne, Germany Wireless Sensor Networks for Aerospace Applications Dr. Bahareh Zaghari University of Southampton, UK June 9, 2017 In 1961, the

More information

LEARNING FROM THE AVIATION INDUSTRY

LEARNING FROM THE AVIATION INDUSTRY DEVELOPMENT Power Electronics 26 AUTHORS Dipl.-Ing. (FH) Martin Heininger is Owner of Heicon, a Consultant Company in Schwendi near Ulm (Germany). Dipl.-Ing. (FH) Horst Hammerer is Managing Director of

More information

COURSE 2. Mechanical Engineering at MIT

COURSE 2. Mechanical Engineering at MIT COURSE 2 Mechanical Engineering at MIT The Department of Mechanical Engineering MechE embodies the Massachusetts Institute of Technology s motto mens et manus, mind and hand as well as heart by combining

More information

Piezoelectric And Acoustic Materials For Transducer Applications READ ONLINE

Piezoelectric And Acoustic Materials For Transducer Applications READ ONLINE Piezoelectric And Acoustic Materials For Transducer Applications READ ONLINE If looking for a ebook Piezoelectric and Acoustic Materials for Transducer Applications in pdf form, then you've come to faithful

More information

Micro and Smart Systems

Micro and Smart Systems Micro and Smart Systems Lecture - 39 (1)Packaging Pressure sensors (Continued from Lecture 38) (2)Micromachined Silicon Accelerometers Prof K.N.Bhat, ECE Department, IISc Bangalore email: knbhat@gmail.com

More information

WHITE PAPER. Continuous Condition Monitoring with Vibration Transmitters and Plant PLCs

WHITE PAPER. Continuous Condition Monitoring with Vibration Transmitters and Plant PLCs WHITE PAPER Continuous Condition Monitoring with Vibration Transmitters and Plant PLCs Visit us online at www.imi-sensors.com Toll-Free in USA 800-959-4464 716-684-0003 Continuous Condition Monitoring

More information

» Facing the Smart Future «

» Facing the Smart Future « Industrie 4.0 Internet of Things» Facing the Smart Future «Smart Products, Production and Services Internet of Services Industrial Internet Digital Manufacturing Call for Partners: Consortium Study Our

More information

Capacitive sensing CEE575

Capacitive sensing CEE575 Capacitive sensing CEE575 Before we begin Michael Faraday (1792 1876) Before we begin Michael Faraday holding a glass bar of the type he used in 1845 to show that magnetism can affect light in a dielectric

More information

Guided Wave Micro-Opto-Electro-Mechanical Sensors

Guided Wave Micro-Opto-Electro-Mechanical Sensors Guided Wave Micro-Opto-Electro-Mechanical Sensors Talabattula Srinivas Applied Photonics Laboratory, Department of Electrical Communication Engineering Indian Institute of Science, Bangalore 560012, India.

More information

FRAUNHOFER INSTITUTE FOR PHOTONIC MICROSYSTEMS IPMS. Application Area. Quality of Life

FRAUNHOFER INSTITUTE FOR PHOTONIC MICROSYSTEMS IPMS. Application Area. Quality of Life FRAUNHOFER INSTITUTE FOR PHOTONIC MICROSYSTEMS IPMS Application Area Quality of Life Overlay image of visible spectral range (VIS) and thermal infrared range (LWIR). Quality of Life With extensive experience

More information

THIS IS INNOVATION Compound Semiconductors

THIS IS INNOVATION Compound Semiconductors THIS IS INNOVATION Compound Semiconductors E N A B L I N G This is a quiet industrial revolution, nudging forward the capabilities of the electronics which hide inside nearly every modern day device and

More information

Intro to MEMS. Lecture 1: Dong-Il Dan Cho. Seoul National University Nano/Micro Systems & Controls Laboratory

Intro to MEMS. Lecture 1: Dong-Il Dan Cho. Seoul National University Nano/Micro Systems & Controls Laboratory Lecture 1: Intro to MEMS School of Electrical l Engineering i and Computer Science, Seoul National University Nano/Micro Systems & Controls Laboratory Email: dicho@snu.ac.kr URL: http://nml.snu.ac.kr What

More information

Information & Communication Technologies

Information & Communication Technologies Madrid, 10/4/2007 1ª CONFERENCIA DEL VII PROGRAMA MARCO DE I+D Una oportunidad para investigar e innovar en cooperación Information & Communication Technologies Jesús Villasante Head of Unit Software &

More information

Talk: How companies successfully partner with Irish Universities - Industry Engagement at Trinity College Dublin

Talk: How companies successfully partner with Irish Universities - Industry Engagement at Trinity College Dublin Talk: How companies successfully partner with Irish Universities - Industry Engagement at Trinity College Dublin Trinity College, The University of Dublin, is Ireland highest ranked university and a member

More information

Process Technology to Fabricate High Performance MEMS on Top of Advanced LSI. Shuji Tanaka Tohoku University, Sendai, Japan

Process Technology to Fabricate High Performance MEMS on Top of Advanced LSI. Shuji Tanaka Tohoku University, Sendai, Japan Process Technology to Fabricate High Performance MEMS on Top of Advanced LSI Shuji Tanaka Tohoku University, Sendai, Japan 1 JSAP Integrated MEMS Technology Roadmap More than Moore: Diversification More

More information

There are four possible reasons that justify directional or horizontal drilling:

There are four possible reasons that justify directional or horizontal drilling: APPLICATION NOTE Accelerometers for Drilling Oil and gas extraction have tremendously evolved over the last century. The need to dig wells ever more deeply has required new processes and technologies.

More information

EPD ENGINEERING PRODUCT DEVELOPMENT

EPD ENGINEERING PRODUCT DEVELOPMENT EPD PRODUCT DEVELOPMENT PILLAR OVERVIEW The following chart illustrates the EPD curriculum structure. It depicts the typical sequence of subjects. Each major row indicates a calendar year with columns

More information

Ultra-high speed inkjet droplet measurement and monitoring with laser diagnostics

Ultra-high speed inkjet droplet measurement and monitoring with laser diagnostics Ultra-high speed inkjet droplet measurement and monitoring with laser diagnostics Marek Czapp Application and Sales Manager, Western and Eastern Europe Dantec Dynamics GmbH, Ulm, Germany 08-10-2018 Copyright

More information

March Transponder coils. TPL series TPL TPL

March Transponder coils. TPL series TPL TPL I N D U C T O R S March 2018 Transponder coils TPL series TPL1183427 TPL1183525 (2/) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY

More information

Tactical grade MEMS accelerometer

Tactical grade MEMS accelerometer Tactical grade MEMS accelerometer S.Gonseth 1, R.Brisson 1, D Balmain 1, M. Di-Gisi 1 1 SAFRAN COLIBRYS SA Av. des Sciences 13 1400 Yverdons-les-Bains Switzerland Inertial Sensors and Systems 2017 Karlsruhe,

More information