Sartorius Cubis - Series Installation Instructions Precision and Analytical Scales Models MSA, MSU, MSE

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Sartorius Cubis - Series Installation Instructions Precision and Analytical Scales Models MSA, MSU, MSE"

Transcription

1 Insallaion Insrucions Sarorius Cubis - Series Precision and Analyical Scales Models MSA, MSU, MSE

2 Informaion for he User Informaion for he User Abou hese Insallaion Insrucions Please read hese insallaion insrucions carefully before puing he equipmen ino operaion for he firs ime. Read he safey precauions carefully. These insallaion insrucions consiue a par of he produc. Keep hese insallaion insrucions in a safe place ha is easily accessible o all personnel who operae his equipmen. If hese insrucions are los, please conac Sarorius for a replacemen or download he laes manual from our websie Warning/Danger Symbols Warning/Danger symbols used in hese insrucions: Explosive amosphere Poenial danger of physical injury or deah Danger of elecrical shock Poenial danger of physical injury or deah Warning: poenial hazard of physical injury, Healh risk or risk of propery damage h Useful informaion and ips Noe on use in legal merology Noe regarding device operaion Symbols The following symbols are used in hese insrucions: y Sands for operaing insrucions Describes wha happens afer you have performed a paricular sep. Perform seps in he given order Indicaes an iem in a lis Documen Convenions The illusraions in hese insrucions are based on he MSA, MSU, MSE models. Holine: Telephone: , Fax: Cubis Insallaion Insrucions

3 Conens Conens Page Abou hese Insallaion Insrucions Warning/Danger Symbols Symbols Documen Convenions Conens Safey Precauions Explosive Amosphere 4 Danger of Elecrical Shock 4 Hazards a he Place of Insallaion and During Operaion 5 Inended Use 6 General View of he Equipmen 7 Geing Sared Unpacking he Equipmen 8 Equipmen Supplied 0 Assembly Insalling he Analyical Draf Shield; Insalling he Draf Shield on Milligram Scales, Scale Assembly Assembly for Models wihou a Draf Shield 4 Transporing he Scale 5 Sorage and Shipping Condiions 5 Insallaion Acclimaizaion 6 Seing he Angle for he Display and Conrol Uni 6 Leveling he Scale, Seing he Level Indicaor 6 Page Modifying he Scale Seing up he Display and Conrol Uni a he Place of Use 0 Removing he Tilable Display and Conrol Uni for Models MSA and MSU 0 Removing he Reainer wih he Display and Conrol Uni Removing he Display and Conrol Uni for Models wihou a Draf Shield Under-Scale Weighing 5 Using he Cable Opening in he Draf Shield 6 Removing he Side Draf Shield Panels for Milligram Scales 7 Care and Mainenance 8 Service 8 Repairs 8 Cleaning he Scale 8 Cleaning he Sainless Seel Surfaces 9 Safey Inspecion 0 Transporing he Scale Disposal 7 Specificaions 8 Power Connecion 7 Safey Precauions 7 Connecing he Power 8 Warm-up Time 8 Equipmen No In Use 9 Connecing Elecronic Devices (Peripherals) 9 Ani-hef Locking Device 9 Cubis Insallaion Insrucions

4 Safey Insrucions Safey Precauions This device complies wih European Council Direcives as well as inernaional regulaions and sandards for elecrical equipmen, elecromagneic compaibiliy, and he sipulaed safey requiremens. Improper use or handling, however, can resul in damage and/or injury. This device should only be operaed by rained personnel. Operaors mus read hese insallaion insrucions, paricularly he safey informaion, and mus be familiar wih he operaion of he equipmen. The operaor mus supplemen hese warnings and safey precauions if necessary and brief operaing personnel accordingly. The requiremens peraining o applicable insallaion regulaions mus be followed when using elecrical equipmen in sysems and environmenal condiions wih increased safey requiremens. Relevan laws, sandards, regulaions, guidelines and environmenal proecion laws valid in your counry mus be observed. Always keep he equipmen and scale freely accessible. Any insallaion work or scale usage ha does no conform o he insrucions in his manual resuls in forfeiure of all claims under he manufacurer s warrany. Danger of explosion! Do no use his equipmen in hazardous areas in which explosive maerials are presen. Danger of elecrical shock! Make Do Chemicals Do Insallaion sure ha he volage raing prined on he AC adaper is idenical o your local line volage. The wall oule mus have a proecive grounding conducor. The operaing insrucions included wih he AC adaper mus be followed. no swich on he equipmen if he AC adaper or power cord are damaged. If he scale, he AC adaper or any of he cables are damaged, disconnec he equipmen from he power supply and secure i so ha i canno be urned on. (e.g. gases or liquids) ha can corrode and damage he inside or ouside of he scale, AC adaper, power cable or peripherals mus be kep away from he equipmen. no operae he scale unless he housing and he display are undamaged and he housing closed so ha inadveren conac wih pars inside he equipmen is no possible. Make sure ha no liquids penerae he scale. noe: The operaor shall be responsible for any modificaions o Sarorius equipmen and for any connecions of cables or equipmen no supplied by Sarorius and mus check and, if necessary, correc hese modificaions and connecions. Informaion on operaional qualiy is available upon reques from Sarorius. You should only use peripherals and opions available from Sarorius. You can only urn off power o he device by pulling he plug or he plug for he mains connecion line, or by unscrewing he four-pin plug a he DC supply cable for he scale. 4 Cubis Insallaion Insrucions

5 Safey Insrucions Do no exer mechanical pressure on he display wih sharp objecs, as his will damage he display. Liquid peneraion can damage he elecrical componens. Only use a lighly-moisened cloh for cleaning. See Care and Mainenance" for cleaning he device. Do no compromise he IP proecion of he scale. Do no open he scale housing. If he seal is broken, his will resul in forfeiure of all claims under he manufacurer s warrany. The device should only be opened by personnel rained by Sarorius. Disconnec he scale from he wall oule before moving. Avoid condensaion damage o he device. When he scale is urned on, condensaion buildup is no possible. If he device is moved from a cool environmen o a warm environmen, you mus allow he device o acclimaize for approx. hours before connecing o he power supply. Good venilaion is required for devices wih an buil-in fan. Hea build-up should be generally avoided. Mainain a min. disance of approx. 0 cm around he device. Avoid Exercise Make Exercise Hazards a he Place of Insallaion and During Operaion generaing saic elecriciy and poenial equalizaion. A 0 kiloohm ground is used when connecing he scale o he power supply. Disconnecing he ground conducor is no permied. cauion o avoid glass breakage. There is a danger of laceraions or cus caused by sharp edges on glass or meal (conac springs), paricularly when removing or replacing he glass draf shield panels; during cleaning; if a glass sample conainer breaks, or when modifying he scale hardware configuraion. sure all equipmen operaors have received proper insrucions when working wih hazardous or oxic maerials. Failure o follow correc handling procedures can resul in breakage of pars or spillage of liquids or oher subsances. Make sure he necessary proecive clohing or equipmen is worn, such as proecive gloves, clohing, eyewear. All safey regulaions applicable in he laboraory mus be observed. cauion o avoid squeezing or crushing fingers when Operaing he elecronic draf shield Removing or insalling he panels Adjusing he display Do no expose he device o aggressive chemical vapors or o unnecessarily exreme emperaures, moisure, shocks, or vibraion. The device should be seup in areas away from equipmen or devices ha have srong magneic properies. Exreme elecromagneic fields from elecrical lines should also be avoided. The seup locaion should be kep clean and free of dus. Always keep he scale freely accessible. Cubis Insallaion Insrucions 5

6 Inended Use Inended Use Cubis models are high-resoluion precision and analyical scales. They were specially developed for exac deerminaion of maerial mass in liquid, pase, powder or solid form. Appropriae conainers mus be used for each ype of sample maerial. Scale capaciy depends on he Cubis model used. Capaciies range from ± 0.0 mg (lowes mass deerminaion) o.0 kg (highes mass deerminaion). Cubis models are designed specially for use in research, educaion and day-o-day laboraory asks in science and indusry. They are designed o be used exclusively indoors. Cubis models can be operaed sandalone, conneced o a PC, or in a nework 6 Cubis Insallaion Insrucions

7 General View of he Equipmen General View of he Equipmen No. Descripion Order no. for replacemen Upper sliding draf shield panel/handle Back panel 69 ME000 Weighing pan 4 Pan suppor 69 ME000 5 Shield plae 6 Pan reainer 7 Righ sliding panel/handle 8 SD card slo (for MSU, MSA models) 9 Leveling foo 0 Display Display and conrol uni Draf shield/shield disk (only for models wih a readabiliy of 0 mg) Under-scale weighing por (on he boom of he scale) 4 Level indicaor 5 Power socke 6 Slo for aaching an ani-hef device 7 USB inerface for a PC connecion 8 Hook for below-scale weighing 9 Slo for opional inerfaces, e.g. 9-pin daa oupu or Blueooh (as shown) 0 Communicaion inerface (PERIPHERALS) Menu access swich Lef sliding panel/handle Eherne inerface (on he boom of he display and conrol uni) 4 h Please refer o he CD included wih he main insrucion manual for a deailed lis of accessories and replacemen pars Cubis Insallaion Insrucions 7

8 Geing Sared Geing Sared Unpacking he Equipmen Open he box. Use boh hands o lif he scale, wih he packaging, ou of he cardboard box. Place he packaging wih he scale on he floor. Remove he op par of he packaging. 8 Cubis Insallaion Insrucions

9 Geing Sared Scale wih a draf shield Remove he packages (conaining draf shield panels, weighing pan, pan suppor, AC adaper, ec.) from he lower packaging and place hem o one side. Use boh hands o lif he scale ou of he packaging. Exercise cauion o avoid glass breakage. Never lif he equipmen by he draf shield panels o remove i from he packaging. Place he scale on an even surface. Scale wihou a draf shield Use boh hands o remove he scale from he packaging. Remove he AC adaper and he scale pars from he packaging. Cubis Insallaion Insrucions 9

10 Geing Sared Equipmen Supplied Afer unpacking he device and all pars, check i immediaely for any visible damage as a resul of rough handling during shipmen. If you deec any damage, proceed as direced in he chaper eniled Care and mainenance" under Safey inspecion." Save he box and all pars of he packaging for any fuure ranspor. Unplug all conneced cables before packing he equipmen. The model wih he analyical draf shield comes wih he following: ) Sliding draf shield panel ) Righ draf shield panel ) Lef draf shield panel 4) Weighing pan 5) Pan suppor 6) Shield plae No picured: AC adaper Operaing insrucions USB cable 4 5 The model wih he milligram draf shield comes wih he following: ) Sliding draf shield panel ) Righ draf shield panel ) Lef draf shield panel 4) Weighing pan 5) Pan suppor 6) Shield plae No picured: AC adaper Operaing Insrucions USB cable 6 The model wihou he draf shield comes wih he following: ) Weighing pan ) Pan suppor ) Shield disk (only for models wih a readabiliy of 0 mg) No picured: AC adaper Operaing Insrucions USB cable 0 Cubis Insallaion Insrucions

11 Geing Sared Assembly Insalling he Analyical Draf Shield; Assembling he scale Place pars on he scale as shown in he picure.. Shield plae. Pan suppor. Weighing pan Slide he upper draf shield panel ino he guide rails from he rear. Slide he side draf shield panel ino he guide rails from he rear. Make sure he panels are wihin he upper and lower guide rails. Slide he panels in unil hey engage.. Righ draf shield panel. Lef draf shield panel y This complees he scale assembly. Cubis M Insallaion Insrucions

12 Geing Sared Insalling he Draf Shield on Milligram Scales, Scale Assembly Place pars on he scale as shown in he picure.. Shield plae. Pan suppor. Weighing pan Firs inser he shield plae. Make sure he pin on he pan suppor (see illusraion) is facing oward he fron, and slide i under he clip on he pan reainer.. Inser he pan suppor Afer insering he pan suppor, press i down agains he shield plae so ha i lies fla.. Press down on he pan suppor Exercise cauion o avoid squeezing or crushing fingers. Place he weighing pan on he pan suppor.. Weighing pan Cubis Insallaion Insrucions

13 Geing Sared Slide he upper draf shield panel ino he guide rails from he rear while pressing he locking ab. Slide he side draf shield panel ino he guide rails from he rear while pressing he locking ab.. Righ draf shield panel. Lef draf shield panel y This complees he scale assembly. Cubis MSA Insallaion Insrucions

14 Geing Sared Assembly for Models wihou a Draf Shield Place pars on he scale as shown in he picure.. Pan suppor. Shield plae/draf shield. Weighing pan Place he pan suppor diagonally and press down lighly.. Pan suppor Carefully urn he pan suppor clockwise unil he wo buons engage. The pan suppor is now aached. Inser he shield plae/draf shield.. Shield plae/draf shield Place he weighing pan on he pan suppor.. Weighing pan y This complees he scale assembly. 4 Cubis Insallaion Insrucions

15 Geing Sared Transporing he Scale Transporing he device over shor disances Carry he scale as shown in he illusraion or as shown in his illusraion. Exercise cauion o avoid glass breakage. Never lif and carry he scale by is draf shield. Sorage and Shipping Condiions Permied sorage and shipping emperaure: C Unpacked devices can lose heir precision if subjec o exreme vibraions. Excessive vibraions may compromise he safey of he equipmen. Save he packaging for any fuure sorage or shipmen of he scale. Only he original packaging provides opimum proecion for he equipmen. Follow all warnings and safey precauions. Follow he insrucions in he chaper Transporing he Scale." Cubis MSA Insallaion Insrucions 5

16 Geing Sared Insallaion Selec he proper seup locaion: Se up device on a sable, even surface ha is no exposed o vibraions (e.g. weighing sone). Ensure he device is locaed in a place where excessive hea canno build up. Mainain free access o he device a all imes. Acclimaizaion Condensaion from humidiy can form on he surfaces of a cold device when i is brough ino a subsanially warmer area. You can preven his by acclimaizing he device for abou hours a room emperaure, leaving i unplugged from AC power. Follow all warnings and safey precauions from he respecive chaper. Choose a locaion ha is no subjec o he following negaive influences: Hea (heaer or direc sunligh) Drafs from open windows, AC sysems and doors Exreme vibraions during weighing Excessive moisure Seing he Angle for he Display and Conrol Uni The angle of he display and conrol uni can be adjused, for example, o adjus o ambien lighing condiions. On MSA and MSU models, he display and conrol uni can be iled as desired. R L Leveling he Scale, Seing he Level Indicaor h Leveling he scale compensaes for slan or unevenness a he place of insallaion. The scale mus be perfecly horizonal o ensure consisen, reproducible weighing resuls. All models are equipped wih an elecronic il angle deecion feaure. If he scale is no level, he scale emis an aler (models MSA and MSU, see brief insrucions). The display shows a graphical represenaion of a level indicaor and ex promps ha guide he user hrough he leveling process. The scale is leveled using boh fron leveling fee. L R Turn boh back leveling fee (only for models wih back leveling fee). y Turn he fron fee as shown in he illusraion unil he air bubble is cenered wihin he circle of he level indicaor. Normally, several leveling seps are required. L R Turn boh back leveling fee unil hey ouch he seup surface (only for models wih back leveling fee). 6 Cubis Insallaion Insrucions

17 Geing Sared Power Connecion Check he volage raing and plug design The prined volage raing (see ype label) mus mach he volage in he place of insallaion. If he saed supply volage or he plug design of he power cord does no comply wih your counry's sandard, please inform he neares Sarorius represenaive or your dealer. The power connecion mus be made in accordance wih he regulaions applicable in your counry. In order o connec he equipmen o he power supply (proecion class ), use a correcly insalled wall oule wih a proecive grounding conducor (PE) and a fuse of a maximum 6 A. If a main feeder from he ceiling is required or if insallaion of a CEE plug is necessary, hese mus be carried ou by a qualified elecrician. Only use original Sarorius power cables. Safey Precauions The oupu line of he power supply has a Pol (GND) conneced o he meal scale housing. The daa inerface is also galvanically linked o he scale housing (GND).. Plug he DC supply cable ino he scale and ighen he hreaded fiing.. Plug he oher end of he power cord ino he AC adaper. Cubis Insallaion Insrucions 7

18 Geing Sared Esablish connecion o he power supply Inser he AC adaper plug ino he wall oule. y The scale is now ready o use. Warm-up Time y In order o provide exac resuls, he scale mus warm up a leas 0 minues afer firs being plugged in. Only afer his ime will he device have reached he required operaing emperaure. The firs ime a verified scale used in legal merology (legal-for-rade applicaions) is conneced o he power, i mus warm up for a leas 4 hours before operaion. Afer having been disconneced and hen conneced again, i mus warm up for 0 minues. Turn on he device via he A key. The following appears on he display: y The operaor can now follow he brief insrucions o configure scale seings before beginning weighing operaions. 8 Cubis Insallaion Insrucions

19 Geing Sared Equipmen no In Use Place he equipmen in sandby mode when i will no be in use for a shor period of ime by pressing he A key. For longer periods of ime, he device should be disconneced from he power supply. Connecing Elecronic Devices (Peripherals) Make absoluely sure ha he device is unplugged from he power supply before connecing/disconnecing any peripheral device (priner, scanner, PC) o or from he daa inerface. A device conneced o he power supply should never be opened. Ani-hef Locking Device (Accessory) An ani-hef locking device can be insalled o he back of he scale. Cubis Insallaion Insrucions 9

20 Geing Sared Modifying he Scale Seing up he Display and Conrol Uni a he Place of Use The display and conrol uni can be removed for all models o enable he operaor o cusomize he work space. Removing he Tilable Display and Conrol Uni for Models MSA and MSU Posiion he scale a he edge of he able or workbench so ha he display and conrol uni exends beyond he ableop. Raise he back of he uni as shown in he illusraion. Roae he display and conrol uni owards you approx. 5.. Posiion Move he display and conrol uni downwards verically o release i from he locking mechanism.. Remove he display and conrol uni. 0 Cubis Insallaion Insrucions

21 Geing Sared Carefully pull ou he cable ha is conneced on one side of he display and conrol uni. Posiion he display and conrol uni as desired. Removing he Reainer wih he Display and Conrol Uni Remove all iems (such as weighs) from he draf shield. Carefully remove all pars as shown in he illusraion.. Weighing pan. Pan suppor. Shield plae/draf shield Keep all pars in a safe place. Remove he panels (righ and lef). Models wih he analyical draf shield. Press on he locking ab. Remove he panel Models wih he milligram draf shield. Press on he locking ab. Remove he panel Keep all pars in a safe place. Cubis Insallaion Insrucions

22 Geing Sared Remove he upper draf shield panel. Models wih he analyical draf shield (lef illusraion).. Press on he locking ab. Remove he panel Models wih he milligram draf shield (righ illusraion).. Press on he locking ab. Remove he panel Keep all pars in a safe place. Turn over he scale and place on a sof surface. Exercise cauion o avoid glass breakage for models wih a draf shield. Use a.5 mm Allen wrench o remove he wo screws from he display and conrol uni reainer bracke. Remove he display and re-inser boh screws back ino heir holes. Lenghen he cable as desired and posiion he display and conrol uni as desired. Turn he scale over and place i on an even surface. Carefully place all pars on he scale.. Shield plae/draf shield. Pan suppor. Weighing pan Cubis Insallaion Insrucions

23 This is how you operae Geing he Sared Cubis MSA Replace he upper and side shield panel.. Upper draf shield panel. Righ draf shield panel. Lef draf shield panel h Level he scale. Leveling he scale compensaes for slan or unevenness a he place of insallaion. The scale mus be perfecly horizonal o ensure consisen, reproducible weighing resuls All models are equipped wih an elecronic il angle deecion feaure. If he scale is no level, he scale emis an aler (models MSA and MSU, see brief insrucions). The display shows a graphical represenaion of a level indicaor and ex promps ha guide he user hrough he leveling process. R L The scale is leveled using boh fron leveling fee. Turn boh back leveling fee (only for models wih back leveling fee). L y Turn he fron fee as shown in he illusraion unil he air bubble is cenered wihin he circle of he level indicaor. Normally, several leveling seps are required. R Turn boh back leveling fee unil hey ouch he seup surface (only for models wih back leveling fee). Removing he Display and Conrol Uni for Models wihou a Draf Shield Carefully remove all pars as shown in he illusraion.. Weighing pan. Shield plae/draf shield. Pan suppor Keep all pars in a safe place. Turn over he scale and place on a sof surface. Cubis Insallaion Insrucions

24 Geing Sared Remove he wo reaining screws. Remove he display and re-inser boh screws back ino heir holes. Carefully pull he cable conneced beween he display and conrol uni from he reainer. Deermine he required cable lengh. Reurn he scale o an uprigh posiion and place he pars on he scale.. Aach he pan suppor.. Shield disk (only for models wih a readabiliy of 0 mg). Weighing pan Level he scale. 4 Cubis Insallaion Insrucions

25 This is how you operae Geing he Sared Cubis MSA Under-Scale Weighing A por for an under-scale weighing hanger is locaed on he boom of he scale.. Remove he hook for under-scale weighing from he clip on he boom of he scale.. Push he cover of he under-scale weighing por o one side.. Carefully screw on he under-scale weighing hook. Do no screw i in oo ighly. This could damage he hread or he scale. h Insall a draf proecion shield. Aach he sample (e.g., using a suspension wire) o he hanger. 4 When weighing has been compleed, unscrew he hook and reurn i o he clip. Close he cover of he under-scale weighing por. 4 The under-scale weighing por may no be opened nor used on scales used for legal merology. Cubis Insallaion Insrucions 5

26 Geing Sared Using he Cable Opening in he Draf Shield Models wih an analyical draf shield have an opening for passing a cable (for example, for a emperaure sensor) hrough o he inerior of he sample chamber.. Lif he locking ab on he rear panel of he analyical draf shield.. Lif he panel ou of he draf shield. Turn he panel clockwise 80 so ha he opening is a he boom. Insall he desired sensor. Inser he panel in he guide rail. Lif he locking ab and genly press he panel ino posiion. Press he locking ab down and close i. You can now begin weighing. 6 Cubis Insallaion Insrucions

27 Geing Sared Removing he Side Draf Shield Panels for Milligram Scales The side draf shield panels on milligram scales can be removed and sored a he back of he analyical draf shield. This can be useful, for example, when performing coninuous weighing or filling operaions. h To work wih an open draf shield, he ambien condiions mus be exremely sable. Remove he panel.. Press on he locking ab. Remove he panel Place he panel in he sorage slo a he back of he scale. Cubis Insallaion Insrucions 7

28 Care and Mainenance Care and Mainenance Service Regular servicing by a Sarorius echnician will exend he service life of your scale and ensure is coninued weighing accuracy. Sarorius offers is cusomers service conracs wih regular mainenance inervals ranging from monh o years. The frequency of he mainenance inervals depends on he operaing condiions and user's olerance requiremens. Repairs Repair work mus only be performed by rained service echnicians. Repairs performed by unrained persons may resul in considerable hazards for he user. The device should be unplugged during repair work. Unplug he power cord from he oule. Repair work mus only be performed by Sarorius-rained service echnicians. If required, please conac your Sarorius dealer. Cleaning he Scale Ensure ha no dus or liquid eners he scale weighing sysem. Do no use aggressive cleaning agens (solvens or similar). Disconnec from he supply volage: Unplug he power cord from he wall oule and unplug any daa cables conneced o he scale. Open he panels of he analyical draf shield compleely. Clean he housing and inerior of he scale wih a cloh lighly moisened wih a soap soluion. Dry all pars wih a sof, dry cloh or use bloing paper o absorb dampness. Then replace all dried pars. Remove panels from he analyical draf shield and clean hem wih commercially available glass cleaner. Dry he panels. Then reinsall hem o he scale. 8 Cubis Insallaion Insrucions

29 Care and Mainenance Carefully remove any sample residue/spilled powder using a brush or hand-held vacuum. If necessary, remove he weighing pan, shield plae and pan suppor.. Weighing pan. Shield plae/draf shield. Pan suppor Clean pars wih a cloh or brush. Then replace he pars. Cleaning Sainless Seel Surfaces All sainless seel pars should be cleaned a regular inervals. Use a damp cloh or sponge o clean sainless seel pars on he scale. Only use convenional household cleaning agens which are suiable for sainless seel (e.g. Sahlfix). Afer his, le he device dry. For addiional proecion, proecive oil may be applied. Remove he sainless seel weighing pan and horoughly clean i separaely. Only use solvens for cleaning sainless seel pars. The sainless seel weighing pan should be cleaned simply by rubbing. Afer his, rinse he equipmen horoughly unil all residue is removed. No proecive oil should be applied o he sainless seel weighing pan. Cubis Insallaion Insrucions 9

30 Care and Mainenance Safey Inspecion If here is any indicaion ha safe operaion of he scale is no longer warraned: Disconnec from he supply volage: Unplug he power cord from he oule. Secure he AC adaper and cord so ha hey canno be used. Safe operaion of he scale wih he AC adaper is no longer ensured when: - The AC adaper or he cord shows visible damage. - The AC adaper no longer funcions properly. - Following exended sorage in adverse condiions. In his case noify your neares Sarorius Service Cener. Mainenance and repair work may be performed only by auhorized service echnicians who have access o he required mainenance manuals and insrucions and who have received he necessary raining. We recommend ha he AC adaper be inspeced by a qualified service echnician wih regard o he following: - Leakagecurren: <0.5 ma measured wih a properly calibraed mulimeer. - Insulaion resisance >7 ΜOhm as measured wih a consan volage of a leas 500 vols a a 500 kohm load. The duraion and number of checks should be deermined by a qualified Sarorius service echnician on sie based on specific ambien and operaing condiions (once a year as a minimum). 0 Cubis Insallaion Insrucions

31 Transporing he Scale Transporing he Scale If repairs are required, use he original packaging o ranspor he scale. To ensure adequae proecion for safe shipmen, Sarorius producs have been packaged o he exen necessary using environmenally friendly maerials. Only he original packaging provides opimum proecion for he equipmen. Disconnec he device from he power supply. Disconnec any daa cables from he device Remove all iems (such as weighs, sensors, ec.) from he weighing chamber.. Remove he side panel. Remove he oher side panel. Remove he upper draf shield panel 4. Remove he weighing pan 5. Remove he pan suppor 6. Remove he shield plae/draf shield On models wihou a draf shield: press down on he wo pan suppor faseners. Roae and remove he pan suppor. Place he scale in he lower par of he packaging. Cubis Insallaion Insrucions

32 Transporing he Scale Transporing he Pars (Large Analyical Draf Shield) Ge he box ready for he individual pars of he scale. Ge he foam and cardboard insers ready. Place he fla foam pieces in he box. Place he oher foam pieces in he box. Cubis Insallaion Insrucions

33 Transporing he Scale Place he panels in he packaging.. Place he upper draf shield panel ino he packaging (handle upwards).. Place he side panel ino he packaging (handle upwards).. Place he oher side panel ino he packaging (handle downwards). Inser he fron foam pieces ino he box, wedging he panels ino he back foam pieces. Place he cardboard inser ino he box. Place he pan suppor ino he opening. Place he weighing pan on he pan suppor. Cubis Insallaion Insrucions

34 Transporing he Scale Place he shield plae/draf shield ino he opening. Close he box. Transporing he Pars (Small Analyical Draf Shield) Ge he box ready for he individual pars of he scale. Ge he foam pieces ready. Place he scale pars on op of each oher.. Upper draf shield panel. Shield plae/draf shield. Pan suppor 4 Cubis Insallaion Insrucions

35 Transporing he Scale Slide he pars ino he foam. Place he panels in he packaging.. Place he side panel ino he packaging (handle downwards).. Place he oher side panel ino he packaging (handle upwards). Place he foam piece in fron of he pars. Place he package ino he box. Cubis Insallaion Insrucions 5

36 Transporing he Scale Slide he shield plae ino he packaging. Close he box. Place he box ino he packaging. Place he he op par on o he packaging. Inser he scale ino he box wih cushioning. Send he packaged scale. 6 Cubis Insallaion Insrucions

37 Disposal This is how you operae he Cubis MSA Disposal The packaging is o be aken o a local wase disposal sie if no longer required. The packaging comprises of environmenally-friendly maerials ha can be used as secondary raw maerials. The device, including accessories and baeries, is no o be hrown ino he household wase. EU legislaion in Member Saes requires elecrical and elecronic equipmen o be colleced separaely from unsored municipal wase so ha i may be recycled. In Germany and several oher counries, Sarorius AG iself assumes responsibiliy for he reurn and conforman disposal of is elecronic and elecrical producs. These producs may no be placed wih household wase or brough o collecion ceners run by local public disposal operaions no even by small commercial operaors. For disposal in Germany and in he oher member naions of he European Economic Area (EEA), please conac our local service echnicians or our Service Cener in Göingen, Germany: Sarorius AG Servicezenrum, Weender Landsrasse 94-08, 7075 Göingen, Germany In counries ha are no members of he European Economic Area (EEA) or where no Sarorius subsidiaries or dealerships are locaed, please conac your local auhoriies or a commercial disposal operaor. Remove he baeries and hand hem in o a collecion poin prior o disposal/scrapping of he device. Sarorius AG, is affiliaes, subsidiaries, dealers and disribuors will no ake back equipmen conaminaed wih hazardous maerials (ABC conaminaion) - eiher for repair or disposal. Please refer o our web sie ( or conac he Sarorius Service Deparmen for more deailed informaion on disposal of your device and repair service addresses. Cubis Insallaion Insrucions 7

38 Specificaions Specificaions Sarorius power supply Model Primary 00 40V~, -5%/+0%, 50-60Hz,.0A Secondary 5V, ± 5%,.66A (max.), proeced elecronically agains shor circui Power supply cable Oher daa wo-sided plug wih a -pin counry-specific power plug and -pin socke (IEC/EN600-/C4) For connecion o he power supply see label on he power supply or he included operaing insrucions Scale Power supply only via he Sarorius power supply Inpu volage 5Vdc, ± 5% Power consumpion 7W (max.) Ambien condiions Environmen Use indoors Sorage and shipping emperaure -0 C C Ambien emperaure, operaion +5 C C Elevaion 000 m above sea level Highes relaive humidiy 80% for emperaures up o C, decreasing linearly up o 50% relaive humidiy for 40 C Safey of elecrical equipmen according o EN 600-:00 Safey requiremens for elecrical equipmen for measuremen, conrol, and laboraory use - Par : General requiremens Elecromagneic compaibiliy according o EN 66-:006 Elecrical equipmen for measuremen, conrol, and laboraory use - EMC requiremens - Par : General requiremens Inerference resisance Suiable for use in indusrial areas Immuniy o inerference Class B: Suiable for use in residenial areas and areas ha are conneced o a low volage nework ha also supply residenial buildings. 8 Cubis Insallaion Insrucions

39 This is how you operae he Cubis MSA Cubis Insallaion Insrucions 9

40 Sarorius AG Weender Landsraße Göingen, Germany Phone Fax Copyrigh by Sarorius AG, Goeingen, Germany. No par of his publicaion may be reprined or ranslaed in any form or by any means wihou he prior wrien permission of Sarorius AG. All righs reserved. The saus of he informaion, specificaions and illusraions in his manual is indicaed by he dae given below. Sarorius AG reserves he righ o make changes o he echnology, feaures, specificaions and design of he equipmen wihou noice. As of: Sepember 008, Sarorius AG, Göingen Prined in Germany. Prined on bleached, chlorine-free paper WA000 KT Publicaion no.: WMS600-e0809

Retro-reflective photoelectric sensors with polarization filter. Dimensioned drawing

Retro-reflective photoelectric sensors with polarization filter. Dimensioned drawing Rero-reflecive phooelecric sensors wih polarizaion filer Dimensioned drawing en 10-2011/04 50105364 1 khz 0 5m We reserve he righ o make changes DS_PRK3B_Sandard_EL_en.fm 10-30 V DC A 2 LS Polarized rero-reflecive

More information

Retro-reflective photoelectric sensors with polarization filter for bottles. Dimensioned drawing

Retro-reflective photoelectric sensors with polarization filter for bottles. Dimensioned drawing Rero-reflecive phooelecric sensors wih polarizaion filer for boles Dimensioned drawing en 05-2013/08 50103461 1 khz 0 3.5m 10-30 V DC We reserve he righ o make changes DS_PRK3B42_en_50103461.fm Polarized

More information

Solid-state Multi-functional Timer

Solid-state Multi-functional Timer Solid-sae Muli-funcional Timer Eigh operaing modes (H3DE-M) and four operaing modes (H3DE-S) cover a wide range of applicaions. Programmable conac enables he building of a self-holding relay circui (-

More information

The ramp is normally enabled but can be selectively disabled by suitable wiring to an external switch.

The ramp is normally enabled but can be selectively disabled by suitable wiring to an external switch. Vickers Amplifier Cards Power Amplifiers for Proporional Valves EEA-PAM-56*-A-14 Design EEA-PAM-561-A-14 for use wih valve ypes: KDG5V-5, * and KDG5V-7, 1* series EEA-PAM-568-A-14 for use wih valve ypes:

More information

Time Control Technique

Time Control Technique Time Conrol Technique muliimer Mulifuncion Relay MK 785N/2 23928 Your Advanages Up o 1 funcions in one uni Simplified sorage Increased flexibiliy Quick seing of long ime values Opions wih Pluggable Terminal

More information

Electrical amplifiers

Electrical amplifiers Elecrical amplifiers RE 30/0.0 Replaces: 09.05 / Type VT-VSPA- and VT-VSPAK- Componen series X H589_d Table of conens Conens Page Feaures Ordering code Funcional descripion and 3 Block circui diagram /

More information

MX6895BETR. -550V Full Bridge Gate Driver INTEGRATED CIRCUITS DIVISION. Features. Description. Applications. Ordering Information

MX6895BETR. -550V Full Bridge Gate Driver INTEGRATED CIRCUITS DIVISION. Features. Description. Applications. Ordering Information -550V Full Bridge Gae Driver INTEGRATED CIRCUITS DIVISION Feaures Full Bridge Gae Driver Inernal High Volage Level Shif Funcion Negaive 550V Lamp Supply Volage 3V o 12V CMOS Logic Compaible 8V o 12V Inpu

More information

GTZ 25 / 40 / 55. TECHNICAL DATA General features. Category of use: AC51, AC53a

GTZ 25 / 40 / 55. TECHNICAL DATA General features. Category of use: AC51, AC53a GTZ 25 / 40 / 55 THEE-PHASE SOLID STATE ELAYS WITH LOGIC CONTOL Main applicaions Thermoforming Plasic exrusion lines Indusrial ovens and furnaces Hea reamens Conrol applicaions wih high swiching speed

More information

MCR-S-...-DCI. Current transducer up to 55 A, programmable and configurable. Data sheet _en_11. 1 Description

MCR-S-...-DCI. Current transducer up to 55 A, programmable and configurable. Data sheet _en_11. 1 Description Curren ransducer up o 55 A, programmable and configurable Daa shee 100241_en_11 PHOENIX CONTACT 2012-06-07 1 Descripion The MCR-S-...-DCI curren ransducers offer users he opion of ordering a preconfigured

More information

Universal microprocessor-based ON/OFF and P programmable controller MS8122A MS8122B

Universal microprocessor-based ON/OFF and P programmable controller MS8122A MS8122B COMPETENCE IN MEASUREMENT Universal microprocessor-based ON/OFF and P programmable conroller MS8122A MS8122B TECHNICAL DESCRIPTION AND INSTRUCTION FOR USE PLOVDIV 2003 1 I. TECHNICAL DATA Analog inpus

More information

Trigger high-speed, retro-reflective sensors for bottles. Dimensioned drawing

Trigger high-speed, retro-reflective sensors for bottles. Dimensioned drawing Trigger high-speed, rero-reflecive sensors for boles Dimensioned drawing en 03-2014/10 50121192-02 10-30 V DC 0 3.6m 5 khz We reserve he righ o make changes DS_PRK18BFX_en_50121192_02.fm Trigger high-speed,

More information

49.8. Control Relays and Timers. Contents. Product Selection Guide. Timing Relays

49.8. Control Relays and Timers. Contents. Product Selection Guide. Timing Relays Conrol Relays and Timers.8 Produc Selecion Guide Noes Applies o TRN model only. Applies o TRF model only. The E5-248 is baery powered and has hree programmable rigger funcions. This produc may perform

More information

Electric amplifiers. Table of contents. Features. RE 30095/04.11 Replaces: Types VT 5005 to VT Component series 1X 1/8

Electric amplifiers. Table of contents. Features. RE 30095/04.11 Replaces: Types VT 5005 to VT Component series 1X 1/8 Elecric amplifiers RE 30095/04. Replaces: 05.0 /8 Types VT 5005 o VT 5008 Componen series X 558_d Table of conens Conens Page eaures Ordering code uncional descripion Block diagram / pinou: VT 5005 and

More information

Flow Switch LABO-RR.-032-S. Characteristics. Technical data. Ranges

Flow Switch LABO-RR.-032-S. Characteristics. Technical data. Ranges Flow Swich LABO-RR.032-S Simple and economical flow meer for piping diameers from 32 mm o 150 mm Made from plasic (opionally sainless seel) Wih apping sleeve fixing for very rapid insallaion Rero-fiing

More information

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing

Laser retro-reflective photoelectric sensor with polarization filter. Dimensioned drawing Specificaions and descripion PRKL 3B Laser rero-reflecive phooelecric sensor wih polarizaion filer Dimensioned drawing en 09-2012/06 50105363 2 khz 0 3m 10-30 V DC We reserve he righ o make changes DS_PRKL3B622_en_50105363.fm

More information

AK8779B Hall Effect IC for Pulse Encoders

AK8779B Hall Effect IC for Pulse Encoders AK8779B Hall Effec IC for Pulse Encoders 1. General Descripion The AK8779B is a Hall effec lach which deecs boh verical and horizonal (perpendicular and parallel o he marked side of he package) magneic

More information

Laser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing. Teach button Optical axis Indicator diode

Laser retro-reflective photoelectric sensor with polarisation filter. Dimensioned drawing. Teach button Optical axis Indicator diode Specificaions and descripion Leuze elecronic Laser rero-reflecive phooelecric sensor wih polarisaion filer Dimensioned drawing Par No. 501 06860 2 khz 0 3m 10-30 V DC Polarised, laser rero-reflecive phooelecric

More information

AK8779A Hall Effect IC for Pulse Encoders

AK8779A Hall Effect IC for Pulse Encoders AK8779A Hall Effec IC for Pulse Encoders 1. General Descripion The AK8779A is a Hall effec lach which deecs boh verical magneic field and horizonal magneic field (perpendicular and parallel o he marked

More information

OPERATION MANUAL. Indoor unit for air to water heat pump system and options EKHBRD011ADV1 EKHBRD014ADV1 EKHBRD016ADV1

OPERATION MANUAL. Indoor unit for air to water heat pump system and options EKHBRD011ADV1 EKHBRD014ADV1 EKHBRD016ADV1 OPERAION MANUAL Indoor uni for air o waer hea pump sysem and opions EKHBRD011ADV1 EKHBRD014ADV1 EKHBRD016ADV1 EKHBRD011ADY1 EKHBRD014ADY1 EKHBRD016ADY1 EKHBRD011ADV1+Y1 EKHBRD014ADV1+Y1 EKHBRD016ADV1+Y1

More information

IR Receiver Module for Light Barrier Systems

IR Receiver Module for Light Barrier Systems New Produc IR Receiver Module for Ligh Barrier Sysems TSSP5838 1926 FEATURES Low supply curren Phoo deecor and preamplifier in one package Inernal filer for 38 khz IR signals Shielding agains EMI Supply

More information

PRM and VTM Parallel Array Operation

PRM and VTM Parallel Array Operation APPLICATION NOTE AN:002 M and V Parallel Array Operaion Joe Aguilar VI Chip Applicaions Engineering Conens Page Inroducion 1 High-Level Guidelines 1 Sizing he Resisor 4 Arrays of Six or More Ms 5 Sysem

More information

4 20mA Interface-IC AM462 for industrial µ-processor applications

4 20mA Interface-IC AM462 for industrial µ-processor applications Because of he grea number of indusrial buses now available he majoriy of indusrial measuremen echnology applicaions sill calls for he sandard analog curren nework. The reason for his lies in he fac ha

More information

Micro 100-TX24 TM. Fast Ethernet Repeater. User s Guide

Micro 100-TX24 TM. Fast Ethernet Repeater. User s Guide Micro 00-TX4 TM Fas Eherne Repeaer User s Guide Micro 00-TX4 Repeaer User s Guide Produc Informaion and Cusomer Suppor For produc informaion or echnical suppor, conac NeWorh or your NeWorh Auhorized Reseller.

More information

<IGBT Modules> CM400DY-13T HIGH POWER SWITCHING USE INSULATED TYPE

<IGBT Modules> CM400DY-13T HIGH POWER SWITCHING USE INSULATED TYPE dual swich (half-bridge) APPLICATION AC Moor Conrol, Moion/Servo Conrol, Power supply, ec. OPTION (Below opions are available.) PC-TIM (Phase Change Thermal Inerface Maerial) pre-apply VCEsa selecion for

More information

IR Receiver Module for Light Barrier Systems

IR Receiver Module for Light Barrier Systems IR Receiver Module for Ligh Barrier Sysems DESIGN SUPPORT TOOLS 19026 click logo o ge sared FEATURES Up o 2 m for presence sensing Uses modulaed burss a 38 khz 940 nm peak wavelengh PIN diode and sensor

More information

Photo Modules for PCM Remote Control Systems

Photo Modules for PCM Remote Control Systems Phoo Modules for PCM Remoe Conrol Sysems Descripion The HS38B series are miniaurized receivers for infrared remoe conrol sysems. PIN diode and preamplifier are assembled on lead frame, he epoxy package

More information

RANCH RAIL FENCE AND GATE INSTALLATION INSTRUCTIONS

RANCH RAIL FENCE AND GATE INSTALLATION INSTRUCTIONS Good Fences Make Good Neighbors RANCH RAIL FENCE AND GATE INSTALLATION INSTRUCTIONS HUSKER VINYL Ranch Rail Fence & Gae Insallaion Insrucions 1 BEFORE YOU START, IT S IMPORTANT TO CHECK: Tha fence or he

More information

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems MECHANICAL DATA 2 Pinning for TSOP348.., TSOP344..: = OUT, 2 = GND, 3 = V S Pinning for TSOP322.., TSOP324..: = OUT, 2 = V S, 3 = GND 3 6672 FEATURES Very low supply curren Phoo deecor and preamplifier

More information

ECMA-373. Near Field Communication Wired Interface (NFC-WI) 2 nd Edition / June Reference number ECMA-123:2009

ECMA-373. Near Field Communication Wired Interface (NFC-WI) 2 nd Edition / June Reference number ECMA-123:2009 ECMA-373 2 nd Ediion / June 2012 Near Field Communicaion Wired Inerface (NFC-WI) Reference number ECMA-123:2009 Ecma Inernaional 2009 COPYRIGHT PROTECTED DOCUMENT Ecma Inernaional 2012 Conens Page 1 Scope...

More information

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems TSOP32.., TSOP34.. IR Receiver Modules for Remoe 2 3 MECHANICAL DATA Pinning: = GND, 2 = V S, 3 = OUT 94 869 FEATURES Very low supply curren Phoo deecor and preamplifier in one package Inernal filer for

More information

White paper. RC223 (type B) residual-current release

White paper. RC223 (type B) residual-current release Whie paper (ype B) residual-curren release (ype B) residual curren release Index 1. Generals... 2 2. Applicaion descripion... 3 2.1 Applicaions...3 2.2 Applicaion examples...4 2.3 How does an operae?...6

More information

Programmable DC Electronic Load 8600 Series

Programmable DC Electronic Load 8600 Series Daa Shee Programmable DC Elecronic Load The programmable DC elecronic loads provide he performance of modular sysem DC elecronic loads in a compac benchop form facor. Wih fas ransien operaion speeds and

More information

PROFET BTS 736 L2. Smart High-Side Power Switch Two Channels: 2 x 40mΩ Status Feedback

PROFET BTS 736 L2. Smart High-Side Power Switch Two Channels: 2 x 40mΩ Status Feedback PROFET BTS 736 2 Smar igh-side Power Swich Two Channels: 2 x 40mΩ Saus Feedback Produc Summary Package Operaing olage bb(on) 4.75...41 Acive channels one wo parallel On-sae Resisance R ON 40mΩ 20mΩ Nominal

More information

TSOP12.. IR Receiver Modules for Remote Control Systems VISHAY. Vishay Semiconductors

TSOP12.. IR Receiver Modules for Remote Control Systems VISHAY. Vishay Semiconductors TSOP1.. IR Receiver Modules for Remoe Conrol Sysems Descripion The TSOP1.. - series are miniaurized receivers for infrared remoe conrol sysems. PIN diode and preamplifier are assembled on lead frame, he

More information

RESISTRON RES-430. Operating Instructions. Important features

RESISTRON RES-430. Operating Instructions. Important features RESISTRON Operaing Insrucions Imporan feaures Microprocessor echnology LC display (green), 4 lines, 2 characers (mulilingual) Auomaic zero calibraion (AUTOCAL) Auomaic opimizaion (AUTOTUNE) Auomaic phase

More information

Disribued by: www.jameco.com 1-800-831-4242 The conen and copyrighs of he aached maerial are he propery of is owner. 16K-Bi CMOS PARALLEL E 2 PROM FEATURES Fas Read Access Times: 200 ns Low Power CMOS

More information

<IGBT Modules> CM500C2Y-24S HIGH POWER SWITCHING USE INSULATED TYPE

<IGBT Modules> CM500C2Y-24S HIGH POWER SWITCHING USE INSULATED TYPE dual pack (Emier common) Collecor curren IC...... 5 0 0 A Collecor-emier volage CES... 1 2 0 0 Maximum juncion emperaure T vjmax... 1 7 5 C Fla base Type Copper base plae Tin plaing ab erminals RoHS Direcive

More information

< IGBT MODULES > CM600DU-12NFH HIGH POWER HIGH FREQUENTLY SWITCHING USE INSULATED TYPE

< IGBT MODULES > CM600DU-12NFH HIGH POWER HIGH FREQUENTLY SWITCHING USE INSULATED TYPE Dual (Half-Bridge) Collecor curren I C...... 6A Collecor-emier volage CES... 6 Maximum juncion emperaure T jmax... 5 C Fla base Type Copper base plae RoHS Direcive complian UL Recognized under UL557, File

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) DUAL SWITCH-MODE SOLENOID DRIER HIGH CURRENT CAPABILITY (up o.5a per channel) HIGH OLTAGE OPERATI (up o 46 for power sage) HIGH EFFICIENCY SWITCHMODE OPERATI REGULATED OUTPUT CURRENT (adjusable) FEW EXTERNAL

More information

Not Recommend. for New Design < IGBT MODULES > CM1400DUC-24NF HIGH POWER SWITCHING USE INSULATED TYPE APPLICATION

Not Recommend. for New Design < IGBT MODULES > CM1400DUC-24NF HIGH POWER SWITCHING USE INSULATED TYPE APPLICATION dual swich (Half-Bridge) Collecor curren I C...... 1 4 A Collecor-emier volage CES... 1 2 Maximum juncion emperaure T jmax... 1 5 C Fla base Type Copper base plae (non-plaing) RoHS Direcive complian Recognized

More information

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems IR Receiver Modules for Remoe Conrol Sysems MECHANICAL DATA Pinning for : 1 = OUT, 2 = GND, 3 = V S 1926 FEATURES Very low supply curren Phoo deecor and preamplifier in one package Opimized for Sony and

More information

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems IR Receiver Modules for Remoe Conrol Sysems 2 MECHNICAL DATA Pinning for TSOP44.., TSOP48..: = OUT, 2 = GND, 3 = V S Pinning for TSOP22.., TSOP24..: = OUT, 2 = V S, 3 = GND 3 6672 FEATURES Improved immuniy

More information

IR Receiver Modules for Remote Control Systems

IR Receiver Modules for Remote Control Systems IR Receiver Modules for Remoe Conrol Sysems 1926 FEATURES Very low supply curren Phoo deecor and preamplifier in one package Inernal filer for PCM frequency Supply volage: 2.5 V o 5.5 V Improved immuniy

More information

Special Insert. Everything you wanted to know about Type B residual current circuit breakers but never dared to ask

Special Insert. Everything you wanted to know about Type B residual current circuit breakers but never dared to ask Special Inser Everyhing you waned o know abou Type B residual curren circui breakers bu never dared o ask Claudio Amadori: R&D ABB 1 Figure 1 - Marking of he Type B residual curren circui breakers Type

More information

IR Receiver for High Data Rate PCM at 455 khz Description

IR Receiver for High Data Rate PCM at 455 khz Description IR Receiver for High Daa Rae PCM a 455 khz Descripion The is a miniaurized receiver for infrared remoe conrol and IR daa ransmission. PIN diode and preamplifier are assembled on lead frame, he epoxy package

More information

S Series with PFC Data Sheet 100 Watt AC-DC PFC Converters

S Series with PFC Data Sheet 100 Watt AC-DC PFC Converters Wa AC-DC PFC Converers 4.4" 3 U Feaures RoHS lead-free-solder and lead-solder-exemped producs are available. Class I equipmen Power facor >.93, harmonics IEC/EN 6-3-2 Immuniy according o IEC/EN 6-4-2,

More information

Solid-state Timer. DIN 48 x 48-mm Multifunctional Timer with Many Time Ranges and Operating Modes, and Wide Power Supply Ranges

Solid-state Timer. DIN 48 x 48-mm Multifunctional Timer with Many Time Ranges and Operating Modes, and Wide Power Supply Ranges Solid-sae Timer DIN 48 x 48-mm Mulifuncional Timer wih Many Time Ranges and Operaing Modes, and Wide Supply Ranges A wider power range reduces he number of imer models kep in sock. An 11-pin or 8-pin model

More information

Monitoring Relays. Current Monitoring A A DIN. Comat products comply with different international standards and are certified accordingly.

Monitoring Relays. Current Monitoring A A DIN. Comat products comply with different international standards and are certified accordingly. Monioring elays Curren Monioring DI Coma producs comply wih differen inernaion sandas and are cerified accoingly. Curren Monioring elays EOC- EUC-B -05-30 -60 JUST LOOP IT LOD Seing ranges x x 3x 4x 5x

More information

S Series Data Sheet 100 Watt AC-DC and DC-DC Converters

S Series Data Sheet 100 Watt AC-DC and DC-DC Converters Wa AC-DC and DC-DC Converers 6." TE 68 6.6"." 3 U Feaures Inpu volage ranges from 8 o 385 VDC and 85 o 6 VAC, 7- Hz or isolaed oupus up o 8 VDC Class I equipmen RoHS lead solder exempion complian Exremely-wide

More information

ROOM THERMOSTAT WITH GSM MODULE

ROOM THERMOSTAT WITH GSM MODULE ROOM THERMOSTAT WITH GSM MODULE Backli display Afer you press any buon, he display is backli auomaically for a leas 5 s. PT32 GST A sophisicaed hermosa which can be remoely conrolled by means of SMS messages

More information

Solid-State Timer H3CR-A. Ordering Information. 1/16 DIN Analog-Set Timer with Many Time Ranges, Operating Modes and Wide Supply Voltage Range

Solid-State Timer H3CR-A. Ordering Information. 1/16 DIN Analog-Set Timer with Many Time Ranges, Operating Modes and Wide Supply Voltage Range R Solid-Sae Timer 1/16 DIN Analog-Se Timer wih Many Time Ranges, Operaing Modes and Wide Supply Volage Range H Field-selecable ime ranges from 0.05 second o 300 hours or 0.1 second o 600 hours H Selec

More information

= f 8 f 2 L C. i C. 8 f C. Q1 open Q2 close (1+D)T DT 2. i C = i L. Figure 2: Typical Waveforms of a Step-Down Converter.

= f 8 f 2 L C. i C. 8 f C. Q1 open Q2 close (1+D)T DT 2. i C = i L. Figure 2: Typical Waveforms of a Step-Down Converter. Inroducion Oupu Volage ipple in Sep-Down and Sep-Up Swiching egulaors Oupu volage ripple is always an imporan performance parameer wih DC-DC converers. For inducor-based swiching regulaors, several key

More information

SLA7075M, SLA7076M, SLA7077M, and SLA7078M. Motor Driver IC Family. Motor Drivers. Sanken Power Devices from Allegro MicroSystems.

SLA7075M, SLA7076M, SLA7077M, and SLA7078M. Motor Driver IC Family. Motor Drivers. Sanken Power Devices from Allegro MicroSystems. Moor SLA7075M, SLA7076M, Daa Shee 28210.05B Moor Driver IC Family The SLA7075M, SLA7076M, moor driver ICs feaure 2-phase sepper unipolar drivers. The clock-in ype inpu inerface allows simplified conrol

More information

M Series Data Sheet 50 Watt DC-DC and AC-DC Converters

M Series Data Sheet 50 Watt DC-DC and AC-DC Converters 5 Wa DC-DC and AC-DC Converers Feaures.7" U Exremly wide operaing inpu volage ranges from 8 o 85 VDC and 85 o 6 VAC, 7 o Hz RoHS lead-free-solder and lead-solder-exemped producs available Class I equipmen

More information

MX629. DELTA MODULATION CODEC meets Mil-Std DATA BULLETIN. Military Communications Multiplexers, Switches, & Phones

MX629. DELTA MODULATION CODEC meets Mil-Std DATA BULLETIN. Military Communications Multiplexers, Switches, & Phones DATA BULLETIN MX629 DELTA MODULATION CODEC mees Mil-Sd-188-113 Feaures Mees Mil-Sd-188-113 Single Chip Full Duplex CVSD CODEC On-chip Inpu and Oupu Filers Programmable Sampling Clocks 3- or 4-bi Companding

More information

DATA SHEET. 1N914; 1N916 High-speed diodes DISCRETE SEMICONDUCTORS Sep 03

DATA SHEET. 1N914; 1N916 High-speed diodes DISCRETE SEMICONDUCTORS Sep 03 DISCRETE SEMICONDUCTORS DATA SHEET M3D176 Supersedes daa of April 1996 File under Discree Semiconducors, SC01 1996 Sep 03 FEATURES Hermeically sealed leaded glass SOD27 (DO-35) package High swiching speed:

More information

Exactly on time and economic switching timing relays ETR and DIL ET

Exactly on time and economic switching timing relays ETR and DIL ET Exacly on ime and economic swiching iming relays ETR and DIL ET Tailor-made for every applicaion; all componens feaure he benefis of a series well hough-ou righ down o he fines deail. The iming relays

More information

PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, RECEIVING TYPE 8233

PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, RECEIVING TYPE 8233 INCH-POUND MIL-PRF-1/1593E 15 Augus 2012 SUPERSEDING MIL-PRF-1/1593D 17 Augus 2004 DESCRIPTION: Penode, sharp cuoff. Ouline: See figure 1. PERFORMANCE SPECIFICATION SHEET ELECTRON TUBE, RECEIVING TYPE

More information

Explanation of Maximum Ratings and Characteristics for Thyristors

Explanation of Maximum Ratings and Characteristics for Thyristors 8 Explanaion of Maximum Raings and Characerisics for Thyrisors Inroducion Daa shees for s and riacs give vial informaion regarding maximum raings and characerisics of hyrisors. If he maximum raings of

More information

Application Note 5324

Application Note 5324 Desauraion Faul Deecion Opocoupler Gae Drive Producs wih Feaure: PLJ, PL0J, PLJ, PL1J and HCPLJ Applicaion Noe 1. Inroducion A desauraion faul deecion circui provides proecion for power semiconducor swiches

More information

20 JAHRE. SIB 100-TS Series. Arbitrary 4-Quadrant Voltage and Current Amplifiers. 400 W W DC khz / 1 MHz

20 JAHRE. SIB 100-TS Series. Arbitrary 4-Quadrant Voltage and Current Amplifiers. 400 W W DC khz / 1 MHz 20 JAHRE SIB 100-TS Series Arbirary 4-Quadran Volage and Curren Amplifiers 400 W - 4.000 W DC... 200 khz / 1 MHz 1 Arbirary 4-Quadran Volage and Curren Amplifiers SIB 100-TS Serie 400 W - 4.000 W DC -

More information

Diode RapidSwitchingEmitterControlledDiode. IDP08E65D1 EmitterControlledDiodeRapid1Series. Datasheet. IndustrialPowerControl

Diode RapidSwitchingEmitterControlledDiode. IDP08E65D1 EmitterControlledDiodeRapid1Series. Datasheet. IndustrialPowerControl Diode RapidSwichingEmierConrolledDiode EmierConrolledDiodeRapid1Series Daashee IndusrialPowerConrol EmierConrolledDiodeRapid1Series RapidSwichingEmierConrolledDiode Feaures: 65VEmierConrolledechnology

More information

Diode RapidSwitchingEmitterControlledDiode. IDP20E65D2 EmitterControlledDiode. Datasheet. IndustrialPowerControl

Diode RapidSwitchingEmitterControlledDiode. IDP20E65D2 EmitterControlledDiode. Datasheet. IndustrialPowerControl Diode RapidSwichingEmierConrolledDiode IDP20E65D2 EmierConrolledDiode Daashee IndusrialPowerConrol EmierConrolledDiode RapidSwichingEmierConrolledDiode Feaures: QualifiedaccordingoJEDECforargeapplicaions

More information

Medium voltage power supplies

Medium voltage power supplies Medium volage power supplies Design example 2000 V / 6 Funcion Te recified line volage mainains a square wave generaor of consan frequency, wose AC volage is ransformed, recified and filered, producing

More information

Conductive Elastomer Waveguide Gaskets

Conductive Elastomer Waveguide Gaskets Conducive Elasomer Waveguide Gaskes WAVEGUIDE GASKES Parker Chomerics offers a selecion of EMI gaske maerials ha provide effecive EMI shielding and pressure sealing for choke, cover and conac flanges.

More information

Zelio Plug-In Relays. RUM universal range. Catalog

Zelio Plug-In Relays. RUM universal range. Catalog Zelio Plug-In Relays RM universal range Caalog 0 Couresy of Seven Engineering, Inc. - (00) -00 - sales@seveneng.com - www.sevenengineering.com Couresy of Seven Engineering, Inc. - (00) -00 - sales@seveneng.com

More information

Memorandum on Impulse Winding Tester

Memorandum on Impulse Winding Tester Memorandum on Impulse Winding Teser. Esimaion of Inducance by Impulse Response When he volage response is observed afer connecing an elecric charge sored up in he capaciy C o he coil L (including he inside

More information

Diode RapidSwitchingEmitterControlledDiode. IDP30E65D1 EmitterControlledDiodeRapid1Series. Datasheet. IndustrialPowerControl

Diode RapidSwitchingEmitterControlledDiode. IDP30E65D1 EmitterControlledDiodeRapid1Series. Datasheet. IndustrialPowerControl Diode RapidSwichingEmierConrolledDiode EmierConrolledDiodeRapid1Series Daashee IndusrialPowerConrol EmierConrolledDiodeRapid1Series RapidSwichingEmierConrolledDiode Feaures: 650VEmierConrolledechnology

More information

Ethernet system for length measurement, 24-bit 16/8/4 inductive transducers, LVDT, Half-Bridge, Mahr

Ethernet system for length measurement, 24-bit 16/8/4 inductive transducers, LVDT, Half-Bridge, Mahr CH0 CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH CH9 CH10 CH11 CH12 CH13 CH14 CH15 Couner 0 Couner 1 Couner 2 Couner 3 sysem for lengh measuremen, 24-bi //4 inducive ransducers,, Half-Bridge, Mahr New! 32 digial I/O

More information

Automatic Power Factor Control Using Pic Microcontroller

Automatic Power Factor Control Using Pic Microcontroller IDL - Inernaional Digial Library Of Available a:www.dbpublicaions.org 8 h Naional Conference on Advanced Techniques in Elecrical and Elecronics Engineering Inernaional e-journal For Technology And Research-2017

More information

Step Down Voltage Regulator with Reset TLE 6365

Step Down Voltage Regulator with Reset TLE 6365 Sep Down Volage Regulaor wih Rese TLE 6365 Feaures Sep down converer Supply Over- and Under-Volage-Lockou Low Oupu volage olerance Oupu Overvolage Lockou Oupu Under-Volage-Rese wih delay Overemperaure

More information

AN UVLO (Under Voltage Lock Out) FUNCTION Calculation of Minimum Value of IGBT external Gate Resistance RG. Table 2-1.

AN UVLO (Under Voltage Lock Out) FUNCTION Calculation of Minimum Value of IGBT external Gate Resistance RG. Table 2-1. A p p l i c a i o n Noe AN318 IGBT/Power MOSFET Gae Drive Phoocoupler Technical Markeing Deparmen Compound Semiconducor Devices Business Division Analog & Power Devices Business Uni Renesas Elecronics

More information

A New Measurement Method of the Dynamic Contact Resistance of HV Circuit Breakers

A New Measurement Method of the Dynamic Contact Resistance of HV Circuit Breakers A New Measuremen Mehod of he Dynamic Conac Resisance of HV Circui Breakers M. Landry*, A. Mercier, G. Ouelle, C. Rajoe, J. Caron, M. Roy Hydro-Québec Fouad Brikci Zensol Auomaion Inc. (CANADA) Inroducion

More information

Application Note AN-1083

Application Note AN-1083 Applicaion Noe AN-1083 Feaures of he Low-Side Family IPS10xx By Fabio Necco, Inernaional Recifier Table of Conens Page Inroducion...1 Diagnosis...1 Inpu Curren vs. Temperaure...1 Selecion of he Resisor

More information

ELEG 3124 SYSTEMS AND SIGNALS Ch. 1 Continuous-Time Signals

ELEG 3124 SYSTEMS AND SIGNALS Ch. 1 Continuous-Time Signals Deparmen of Elecrical Engineering Universiy of Arkansas ELEG 3124 SYSTEMS AND SIGNALS Ch. 1 Coninuous-Time Signals Dr. Jingxian Wu wuj@uark.edu OUTLINE 2 Inroducion: wha are signals and sysems? Signals

More information

TESTING CREEPING DISCHARGE BEHAVIOUR OF INSULATORS FOR ISOLATED LIGHTNING PROTECTION SYSTEMS

TESTING CREEPING DISCHARGE BEHAVIOUR OF INSULATORS FOR ISOLATED LIGHTNING PROTECTION SYSTEMS IX Inernaional Symposium on Lighning Proecion 26 h -3 h November 27 Foz do Iguaçu, Brazil TESTING CREEPING DISCHARGE BEHAVIOUR OF INSULATORS FOR ISOLATED LIGHTNING PROTECTION SYSTEMS Beierl, Omar Brocke,

More information

A Control Technique for 120Hz DC Output Ripple-Voltage Suppression Using BIFRED with a Small-Sized Energy Storage Capacitor

A Control Technique for 120Hz DC Output Ripple-Voltage Suppression Using BIFRED with a Small-Sized Energy Storage Capacitor 90 Journal of Power Elecronics, Vol. 5, No. 3, July 005 JPE 5-3-3 A Conrol Technique for 0Hz DC Oupu Ripple-Volage Suppression Using BIFRED wih a Small-Sized Energy Sorage Capacior Jung-Bum Kim, Nam-Ju

More information

TLE7257. Data Sheet. Automotive Power. LIN Transceiver TLE7257SJ TLE7257LE. Rev. 1.1,

TLE7257. Data Sheet. Automotive Power. LIN Transceiver TLE7257SJ TLE7257LE. Rev. 1.1, LIN Transceiver TLE7257SJ TLE7257LE Daa Shee Rev. 1.1, 2015-08-20 Auomoive Power Table of Conens 1 Overview....................................................................... 3 2 Block Diagram...................................................................

More information

Selection guide Zelio Time - timing relays 0

Selection guide Zelio Time - timing relays 0 Selecion guide Zelio ime - iming relays 0 Applicaions Oupu hese iming relays enable simple auomaion cycles o be se up using wired logic. hey can also be used o complemen he funcions of PLs. Solid sae iming

More information

A3-305 EVALUATION OF FAILURE DATA OF HV CIRCUIT-BREAKERS FOR CONDITION BASED MAINTENANCE. F. Heil ABB Schweiz AG (Switzerland)

A3-305 EVALUATION OF FAILURE DATA OF HV CIRCUIT-BREAKERS FOR CONDITION BASED MAINTENANCE. F. Heil ABB Schweiz AG (Switzerland) 21, rue d'arois, F-75008 Paris hp://www.cigre.org A3-305 Session 2004 CIGRÉ EVALUATION OF FAILURE DATA OF HV CIRCUIT-BREAKERS FOR CONDITION BASED MAINTENANCE G. Balzer * D. Drescher Darmsad Universiy of

More information

BOUNCER CIRCUIT FOR A 120 MW/370 KV SOLID STATE MODULATOR

BOUNCER CIRCUIT FOR A 120 MW/370 KV SOLID STATE MODULATOR BOUNCER CIRCUIT FOR A 120 MW/370 KV SOLID STATE MODULATOR D. Gerber, J. Biela Laboraory for High Power Elecronic Sysems ETH Zurich, Physiksrasse 3, CH-8092 Zurich, Swizerland Email: gerberdo@ehz.ch This

More information

A New Voltage Sag and Swell Compensator Switched by Hysteresis Voltage Control Method

A New Voltage Sag and Swell Compensator Switched by Hysteresis Voltage Control Method Proceedings of he 8h WSEAS Inernaional Conference on ELECTRIC POWER SYSTEMS, HIGH VOLTAGES, ELECTRIC MACHINES (POWER '8) A New Volage Sag and Swell Compensaor Swiched by Hyseresis Volage Conrol Mehod AMIR

More information

FSUSB63 3:1 High-Speed USB 2.0 Switch / Multiplexer

FSUSB63 3:1 High-Speed USB 2.0 Switch / Multiplexer FSUSB63 3:1 High-Speed USB 2.0 Swich / Muliplexer Feaures Sw ich Type 3:1 USB Sw ich USB USB 2.0 High-Speed & Full-Speed Complian Break-Before-Make Time 126µs RON 6Ω Typical C ON 6pF Typical Bandw idh

More information

Solid State Modulators for PIII Applications

Solid State Modulators for PIII Applications Solid Sae Modulaors for P Applicaions Dr. Marcel P.J. Gaudreau, P.E., Dr. Jeffrey A. Casey, Timohy J. Hawkey, Michael A. Kempkes, J. Michael Mulvaney; Diversified Technologies, nc. Absrac One of he key

More information

Table of Contents. 3.0 SMPS Topologies. For Further Research. 3.1 Basic Components. 3.2 Buck (Step Down) 3.3 Boost (Step Up) 3.4 Inverter (Buck/Boost)

Table of Contents. 3.0 SMPS Topologies. For Further Research. 3.1 Basic Components. 3.2 Buck (Step Down) 3.3 Boost (Step Up) 3.4 Inverter (Buck/Boost) Table of Conens 3.0 SMPS Topologies 3.1 Basic Componens 3.2 Buck (Sep Down) 3.3 Boos (Sep Up) 3.4 nverer (Buck/Boos) 3.5 Flyback Converer 3.6 Curren Boosed Boos 3.7 Curren Boosed Buck 3.8 Forward Converer

More information

4.5 Biasing in BJT Amplifier Circuits

4.5 Biasing in BJT Amplifier Circuits 4/5/011 secion 4_5 Biasing in MOS Amplifier Circuis 1/ 4.5 Biasing in BJT Amplifier Circuis eading Assignmen: 8086 Now le s examine how we C bias MOSFETs amplifiers! f we don bias properly, disorion can

More information

TLE Overview. High Speed CAN Transceiver. Qualified for Automotive Applications according to AEC-Q100

TLE Overview. High Speed CAN Transceiver. Qualified for Automotive Applications according to AEC-Q100 TLE9250 1 Overview Qualified for Auomoive Applicaions according o AEC-Q100 Feaures Fully complian o ISO 11898-2 (2016) and SAE J2284-4/-5 Reference device and par of Ineroperabiliy Tes Specificaion for

More information

Generating Polar Modulation with R&S SMU200A

Generating Polar Modulation with R&S SMU200A Rohde & Schwarz producs: SMU00 Generaing Polar Modulaion wih R&S SMU00 Polar modulaion is a mehod where digial modulaion is realized as a combinaion of phase and ampliude modulaion, raher han using an

More information

A NEW DUAL-POLARIZED HORN ANTENNA EXCITED BY A GAP-FED SQUARE PATCH

A NEW DUAL-POLARIZED HORN ANTENNA EXCITED BY A GAP-FED SQUARE PATCH Progress In Elecromagneics Research Leers, Vol. 21, 129 137, 2011 A NEW DUAL-POLARIZED HORN ANTENNA EXCITED BY A GAP-FED SQUARE PATCH S. Ononchimeg, G. Ogonbaaar, J.-H. Bang, and B.-C. Ahn Applied Elecromagneics

More information

DS Bit, Programmable, 100kHz Pulse-Width Modulator

DS Bit, Programmable, 100kHz Pulse-Width Modulator www.maxim-ic.com FEUE ingle 5-bi, programmable, pulse-widh modulaor (PWM) djusable Duy Cycle: 0% o 100% 2.7V o 5.5V Operaion andard Frequency Value: 100kHz 2-Wire ddressable Inerface Packages: 8-Pin (150-mil)

More information

MICROMASTER kw kw. Operating Instructions (Compact) Issue 10/06. www. ElectricalPartManuals. com. User Documentation

MICROMASTER kw kw. Operating Instructions (Compact) Issue 10/06. www. ElectricalPartManuals. com. User Documentation MICROMASTER 43 7.5 kw - 25 kw Operaing Insrucions (Compac) Issue /6 User Documenaion Warnings, Cauions and Noes Issue /6 Warnings, Cauions and Noes The following Warnings, Cauions and Noes are provided

More information

PI90LV022, PI90LVB022

PI90LV022, PI90LVB022 PI9LV, PI9LVB 456789456789456789456789456789456789456789456789456789456789456789456789456789 LVDS Mux/Repeaer Feaures Mees or Exceeds he Requiremens of ANSI TIA/ EIA-644-995 Designed for Signaling Raes

More information

EXPERIMENT #4 AM MODULATOR AND POWER AMPLIFIER

EXPERIMENT #4 AM MODULATOR AND POWER AMPLIFIER EXPERIMENT #4 AM MODULATOR AND POWER AMPLIFIER INTRODUCTION: Being able o ransmi a radio frequency carrier across space is of no use unless we can place informaion or inelligence upon i. This las ransmier

More information

EE368/CS232 Digital Image Processing Winter Homework #1 Released: Monday, January 8 Due: Wednesday, January 17, 1:30pm

EE368/CS232 Digital Image Processing Winter Homework #1 Released: Monday, January 8 Due: Wednesday, January 17, 1:30pm EE368/CS232 Digial Image Processing Winer 207-208 Lecure Review and Quizzes (Due: Wednesday, January 7, :30pm) Please review wha you have learned in class and hen complee he online quiz quesions for he

More information

Digital electronic E-BM-AES drivers DIN-rail panel format, for proportional valves without transducer

Digital electronic E-BM-AES drivers DIN-rail panel format, for proportional valves without transducer 056789 056789 056789 056789 Table S050-/ Digial elecronic -BM-AS drivers DIN-rail panel forma, for proporional valves wihou ransducer Scale Real-ime ieldbus Reference -BM-AS-NP-05 S S -BM-AS- NP No Presen

More information

16.5 ADDITIONAL EXAMPLES

16.5 ADDITIONAL EXAMPLES 16.5 ADDITIONAL EXAMPLES For reiew purposes, more examples of boh piecewise linear and incremenal analysis are gien in he following subsecions. No new maerial is presened, so readers who do no need addiional

More information

Notes on the Fourier Transform

Notes on the Fourier Transform Noes on he Fourier Transform The Fourier ransform is a mahemaical mehod for describing a coninuous funcion as a series of sine and cosine funcions. The Fourier Transform is produced by applying a series

More information

Lecture 11. Digital Transmission Fundamentals

Lecture 11. Digital Transmission Fundamentals CS4/MSc Compuer Neworking Lecure 11 Digial Transmission Fundamenals Compuer Neworking, Copyrigh Universiy of Edinburgh 2005 Digial Transmission Fundamenals Neworks consruced ou of Links or ransmission

More information

Transformer of tgδ on MSP430F1331 single chip microcomputer WANG Han 1 CAI Xinjing 1,XiaoJieping 2,Liu weiqing 2

Transformer of tgδ on MSP430F1331 single chip microcomputer WANG Han 1 CAI Xinjing 1,XiaoJieping 2,Liu weiqing 2 2nd Inernaional Workshop on Maerials Engineering and ompuer Sciences (IWMES 205 Transformer of gδ on MSP430F33 single chip microcompuer WANG Han AI Xinjing,XiaoJieping 2,Liu weiqing 2 School of elecrical

More information