The World s Leading Trade Fair Where the Future is the Present

Size: px
Start display at page:

Download "The World s Leading Trade Fair Where the Future is the Present"

Transcription

1 Review The World s Leading Trade Fair Where the Future is the Present Positive atmosphere at productronica 2015 Munich, November 10 13, 2015 On its 40th anniversary, productronica featured plenty of innovations including augmented reality, robotics in electronics manufacturing and the productronica innovation award. Some 38,000 visitors from nearly eighty countries took part in the World s leading trade fair for electronics development and production. Falk Senger, Managing Director at Messe München, drew a positive conclusion: During the past four days of the fair, we have experienced the industry s unbelievable innovative strength. That underscores productronica s position as an international industry gathering for electronics development and production. Rainer Kurtz, Chairman of productronica s Technical Advisory Board, CEO of Kurtz Ersa and Chairman of the VDMA Electronics, Micro and Nano Technologies (EMINT) Association, sees positive signals for the industry: There are so many opportunities to drive our business forward. Industry 4.0 is a new market with a great deal of growth potential. And in automotive electronics, all the driver assistance systems are giving For the first time ever, the fair featured robotics for electronics manufacturing (Source: Messe München) Some 38,000 visitors from nearly eighty countries attended productronica, the World s leading trade fair for electronics development and production. (Source: Messe München) electronics production a considerable boost. The latest figures from a VDMA survey about the business climate verify that. According to studies, growth rates of approximately fifteen percent are expected between now and 2018 among other things due to Industry 4.0, the automotive industry, wireless network technologies and mobile communication. According to a survey by market research institute TNS Infratest, 93 % of the visitors said that productronica met their expectations regarding innovations. Furthermore, the visitor satisfaction was very high: 97 % of the visitors gave the fair a rating of good to excellent. The sharpest increase in attendance was the number of visitors from Asia and from China, Japan, Malaysia and Singapore in particular. After Germany, the countries with the largest number of visitors were Italy, Austria, Switzerland, the Czech Republic, the Russian Federation and Great Britain. Two successful premieres Panel member Prof. Lothar Pfitzner from the Fraunhofer Institute for Integrated Systems and Device Technology IISB, is convinced by the award s concept: Given global competition, it is important to further strengthen machine manufacturers, material producers and information technology suppliers in Europe. productronica and the brand new productronica innovation award play an important role for the economy, but also for the scientific sector, and they strengthen horizontal and vertical cooperation. In doing so, they satisfy a key prerequisite for rapid implementation in system development and the user industry. Of the more than seventy submissions, awards were presented to the following winners in five cluster categories: Fuji Machine in the PCB & EMS cluster, Rehm Thermal in the SMT cluster, F&K Delvotec in the Semiconductors cluster (cf. p. 8), Schleuniger in the Cables, Coils & Hybrids cluster, and Asys in the Future Markets cluster. IT2Industry, the Exhibition and Open Conference for Intelligent, Digitally Networked Working Environments, was held in conjunction with productronica for the first time ever. The trade fairs productronica and electronica are held in alternating years, making Munich the most important place for the electronics industry to meet. The next electronica takes place from November 8 to 11, 2016, and the next productronica takes place in Munich from November 14 to 17, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Laser Technik Journal 1/

2 Review Blechexpo and Schweisstec Strong Groth on all Levels Stuttgart, Germany 3 6 November 2015 Source: Schall Messen The process sequence trade fair duo comprised of Blechexpo and Schweisstec outdid all of the targeted goals at the end of its 2015 edition. The two complementary technical events, namely the Blechexpo international trade fair for sheet metal processing and the Schweisstec international trade fair for joining technology took place at the Stuttgart Exhibition Centre under good economic, although somewhat difficult political conditions. With a total of 1,234 exhibitors from 36 countries, overall exhibition floor space amounting to 90,000 square meters and, last but not least, 38,136 expert visitors from 110 nations, private trade fair promoters and market developers P. E. Schall GmbH & Co. KG are announcing record-breaking numbers across the board, which reflect continuous growth as well. Number of exhibitors from inside and outside of Germany: +7 %, increase in overall exhibition floor space: +6 %, growth with regard to the number of expert visitors: +14 %. And not only can strong growth rates be announced at all levels, the impressive overall results which were hardly expected to reach these levels are above all characterised by organic and qualitative development. Numerous manufacturers and distributors who have often participated at Blechexpo and Schweisstec, or exhibited for the first time this year, see things in exactly the same way and speak unanimously of very good trade fair success with regard to visitor numbers, the quality of their RFQs and above all their decision-making authority. Beyond this, many returning and new exhibitors reported above average numbers of orders taken directly at the event with existing and new customers, so that more than just a few can look forward to full order books at the end of the year and for the upcoming new year as well. Blechexpo and Schweisstec intend to continue to grow organically in their fields with regard to offerings and applications. In this respect, attention is focused above all on further automation and the challenges in the area of joining technology which go hand-in-hand with new materials and material combinations, in addition to innovations in the conventional fields of thermal and mechanical cutting, stamping and forming, as well as thermal and mechanical joining. Previews PHOTONICS. World of Lasers and Optics 2016 Moscow, Russia March 2016 Source: Photonics 2014 expocentre PHOTONICS. World of Lasers and Optics 2016, the international exhibition for laser, optical and optoelectronic technologies will be held in Moscow at Expocentre Fairgrounds. This is the 11th Edition of the International specialized exhibition for Laser, Optical and Optoelectronic Technologies with support from the Ministry of Industry and Trade of the Russian Federation, the State Committee on Science and Technologies, the Republic of Belarus, the European Optical Society and the German TVDI Technologiezentrum. Photonics is the leading exhibition event of the Russian laser and optical industry, with an exhibition area over 6,000 sqm. Over 165 participating companies from 14 countries, including collective expositions of Germany and China, and more than 10,880 professional visitors will be expected. A rich programme of accompanying events will be organized, which cover all trends of today s market of lasers and optoelectronics: eleven conferences, and seven presentations of exhibiting companies. The field of lasers and optics-related science and technology is one of the most highly developed sectors in Russia. Photonics is considered to be one of the key driving forces for innovations in Russia. The market volume in laser technology was estimated in 2014 at around $ 150 million, with an average annual growth rate of about 10 %. The future demand for laser technology in Russia is predicted to remain at a high level and therefore opens up opportunities for industry relevant producers worldwide. With the support of OptecNet Germany e.v., the Association SPECTARIS, and the Federal Ministry of Economics and Technology (BMWi), there is again as in 2015 and 2014 an official German joint company exhibition in Moscow with 18 German Exhibitors. Under the roof of the official German joint pavilion, export-oriented small and medium-sized manufacturers demonstrate their capabilities in the field. (cb) 50 Laser Technik Journal 1/ WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

3 LASER World of Photonics China 2016 Shanghai, China March 2016 Laser World of Photonics China presents the latest applications and technologies of the industry of photonics. It is considered the top trade fair for the laser and photonics industry in China. Around 800 exhibitors from China and around the world are expected to more than 40,000 square meters of exhibition space. From components to industrial applications: The Laser World of Photonics China is Asia s leading trade fair for laser, optics and photonics. The trade fair presents the whole range of the photonics industry. The combination of scientific, research and industrial applications both in the conferences and the trade fairs supports the exchange between the scientific and industrial sectors and emphasizes its unique practical value. Optical components and manufacturing technology for optics are presented in a special exhibit area. The testing and quality assurance with optical systems will be a highlight of the fair. At the Laser World of Photonics China 2016 leading international companies such as Zeiss, Leica, Olympus and Nikon and a total of more than one hundred companies will exhibit in the field of metrology and industrial image processing. Futhermore, visitors can look forward to top level technical conferences and the laser technology forum, which provides industry knowhow by international experts. The Photonics Congress China will be held again in conjunction with the trade fair. The congress topics ranging from the latest research and development in laser technology, laser material processing and their applications, optical technologies, latest laser materials thin-film technology and other manufacturing processes for optical components and laser beam analysis to laser safety. The combination of scientific and industrial applications, both in the conferences as well as at the fair supports the exchange between science and industry, and emphasizes the unique user-oriented character of the fair. During the three-day event in 2015 the Laser World of Photonics China was able to continue its growth: In total 715 companies from twenty countries exhibited over an area of 36,960 square meters. During the three days visited 40,291 professionals from the industry, the trade fair. The Photonics Congress China 2015 attracted 2,374 participants. (cb) Source: Messe München 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Laser Technik Journal 1/

4 Previews SPIE Photonics Europe 2016 Brussels, Belgium 4 7 April 2016 SPIE Photonics Europe will take place in Brussels at the Square Conference Centre, drawing nearly 2,000 leading optics and photonics researchers and innovators for 18 technical conferences on the latest research developments and industry news. This event showcases products like cross-disciplinary optics and photonics event connecting research, applications, and industry. Featuring micro / nano technologies, biophotonics, photonic components, lasers, and photonics for industrial applications etc. in the scientific instruments industry. Speaking ahead of the event, SPIE fellow Professor Francis Berghmans said: I am convinced that this fourth edition of SPIE Photonics Europe 2016 in Brussels will again be the place to meet for academia and industry, and a unique forum for building on the tremendous success of the Year of Light A new conference on quantum technologies is also being introduced, along with a workshop on graphene materials. Around 1,200 technical talks are scheduled to take place. Meanwhile, a two-day exhibition (5 6 April 2016) will showcase the latest equipment from the industry s leading suppliers of optical components, lasers, fibre optics, detectors, sensors, cameras and other instrumentation for optics and photonics. In addition, a full day of industry-focused presentations are also scheduled, including talks providing updates on Horizon 2020, major EU-funded projects, strategies for successful commercialisation and the global photonics market. The event includes the participation of the University of Glasgow s Miles Padgett and Wolfgang Boch, head of the European Commission s photonics unit; Ferenc Krausz of the Max-Planck-Institute for Quantum Optics; and Michael Liehr of the Colleges of Nanoscale Science and Engineering of Suny Polytechnic Institute. The event is supported by organisations from across Europe and sponsored by SPIE. An Innovation Village provides exposure for new products developed by universities and research centres, and the European Village showcases projects of EC initiatives, Networks of Excellence and other consortia. (cb) spie.org/photonics-europe.xml Photonix Expo & Conference 2016 Tokyo, Japan April 6 8, 2016 Photonix 2016 gathers expected 400 exhibitors from optical communications, laser processing, optics, optical measuring / analytical system fields, and is held as the Japan s exhibition for photonics industry. In each field such as communications, secondary battery, electronics where applications of laser and optics technologies are expanding, the Japanese & Asian market is becoming more and more important. Consisting of four different exhibitions specialized in optical communications (FOE th Fiber Optics Expo), laser processing (9th Laser & Applications Expo), optics (9th Optics Expo) and optical measuring / analytical technology (3st Optical Measuring Expo), and a remarkable technical conference, Photonix provides effective international business opportunities in both industrial and academic fields. Asia s largest exhibition & conference for optical communications is one of the most international industry events and shows the latest international technologies and products for optical communications. Leading trade shows for exhibiting spectacle frames, sunglasses, lenses, contact lens, visual test equipment, machinery & materials for making spectacles frames and lenses and spectacle accessories. Photonix Japan will offer enormous opportunities to showcase complete range of laser, optics & sensing technology in Japan. Tokyo International Exhibition Center (Tokyo Big Sight) is the meeting point for telecom carriers / system manufacturers, cable / device manufacturers, electrical installation and power companies etc. Furthermore Japan s largest international exhibition is specialized in laser processing technologies. The 9th Laser & Applications Expo will present laser cutting technologies for processing resistant materials, fine processing technologies with picosecond laser, etc. With co-held academic forum and more sessions on laser technologies joining the conference, it will be enhanced as the central hub of the latest laser technologies. Various kinds of laser solutions for high power, low power and nano processing also will meet professionals from automobile, photovoltaic power generation and more. At the conference, global leader companies will represent major application fields, spoke on the latest laser applications in each industry, as well as leading suppliers will show their latest strategies and technologies. Profile for exhibit includes parts and components, raw materials for frames and lenses, moulds, instruments for optometry and ophthalmology, ophthalmic products, tools & equipment for optical workshop, trade magazines and exhibitions. In 2016 Photonix will become more international with visitors from Germany, France, Scotland, China and Taiwan launching their national pavilions, as well as increased number of attendees from Asia, especially from China & Taiwan. (cb) 52 Laser Technik Journal 1/ WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

5 Control 2016 Celebrates All-round Growth Stuttgart, Germany April 2016 With over 800 exhibitors from 30 countries around the world, Control is the number one source of information for all companies that see first class quality as the basis of their business success. To achieve this objective in the best possible way, Control works intensively with the pioneering institutions of the sector. Those on board include Fraunhofer- Allianz Vision, Fraunhofer Institute for Production Technology and Automation (IPA) and the German Society for Quality (Deutsche Gesellschaft für Qualität DGQ). Control has reinvented itself again and again during the course of the years and has made a significant contribution to the importance which is placed upon quality assurance today. Decisive factors in this respect have included the early recognition and promotion of beneficial technological trends and the integration of user-oriented, practical solutions, without ever challenging the timetested nomenclature which has been changed cautiously where necessary. Nine months before Control 2016 opens bookings have already reached a level of 90 % of the numbers reached at Control 2015 with exhibitors from 25 countries. And many of the exhibitors would like to have more floor space in order to be able to present their in-process QA products and services as integratable in the spirit of the Industry 4.0 strategy in a practice-oriented setting. The successively growing exhibition segment for image processing and vision systems is also experiencing a further upswing and attracting more and more attention, because industry players see Control as the most important system solutions platform where their target groups can be directly approached. Furthermore, after a successful launch in 2015, Con- trol 2016 will feature closer cooperation with the EMVA industry association (European Machine Vision Association) for the first time, who are planning a collective booth amongst other activities. Source: fraunhofer vision special show Fraunhofer-Allianz Vision International Laser Technology Congress AKL 16 Aachen, Germany April 2016 Laser experts from many different sectors will gather at the International Laser Technology Congress AKL 16. Users, manufacturers and developers can take advantage of the international platform to engage in intensive discussions about the current state and future possibilities of laser technology. For the 11th time, over 70 laser experts from research and industry will be sharing their insights into the latest techniques, beam sources, developments and trends in laser technology. The organizer of the event, the Fraunhofer Institute for Laser Technology ILT, is once again expecting over 600 participants. AKL 16 kicks off on April 27, 2016 with two new expert forums on the highlighted topics of process control and laser additive manufacturing. Participants have the option here of spending the whole day delving into the process control of various laser methods exploring everything from low-coherence interferometry and process control in automotive manufacturing to the controlling of welding processes in the plastics industry or else they can spend their time expanding their know-how in the field of additive manufacturing. Laser technology Potential for further development and solutions for industry In the Gerd Herziger Session that opens the Laser Technology Conference on April 28, several experts will describe the challenges currently faced by laser technology. They will discuss laser technology in aviation, the consumer sector and medical engineering and the solutions it offers. In a subsequent panel discussion, these experts will then discuss the prospects for laser technology and its influence on manufacturing technology. On April 28 and 29, some 40 speakers from industry and science will also shed light on the current state of laser technology in the categories of laser material processing (macro and micro), and laser beam sources. In addition, all participants of AKL 16 will have the opportunity to make contact with the around fifty AKL 16 sponsors in the exhibition accompanying the confer- ence and to discuss their questions in individual chats. As part of AKL 16, Arbeitskreis Lasertechnik e.v. and the European Laser Institute (ELI) will be presenting the Innovation Award Laser Technology on April 27, Endowed with 10,000 Euros, the award recognizes outstanding innovations in the development and application of lasers in manufacturing technology. The prize is open to applicants from European industry as well as European universities and R&D centers. LTJ will interview the finalists in a future issue Source: Fh. ILT 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Laser Technik Journal 1/

SEE THE BIG PICTURE IN THE SMALLEST DETAIL. Future prospects for developing and manufacturing innovative electronics.

SEE THE BIG PICTURE IN THE SMALLEST DETAIL. Future prospects for developing and manufacturing innovative electronics. Connecting Global Competence SEE THE BIG PICTURE IN THE SMALLEST DETAIL. Future prospects for developing and manufacturing innovative electronics. FACT SHEET International Trade Fair for Electronics Development

More information

Factsheet Information for exhibitors / 2019

Factsheet Information for exhibitors / 2019 Connecting Global Competence Factsheet Information for exhibitors / 2019 Planet e: Bringing the future to the world. International Trade Fair for Electronic Components, Systems and Applications Shanghai

More information

All the steps of manufacturing starting from the mold manufacturing.

All the steps of manufacturing starting from the mold manufacturing. AUTOMOBILE PARTS/AEROPARTS MANUFACTURING FAIR SURFACE, COATING AND FINISHING FAIR 7 ADDITIVE MANUFACTURING AND 3D PRINTING FAIR All the steps of manufacturing starting from the mold manufacturing. INTERMOLD

More information

ACTIVITY REPORT OF THE NATIONAL INDUSTRIAL COMPETITIVENESS COMMISSION PRAMONĖ 4.0 OF 2017

ACTIVITY REPORT OF THE NATIONAL INDUSTRIAL COMPETITIVENESS COMMISSION PRAMONĖ 4.0 OF 2017 ACTIVITY REPORT OF THE NATIONAL INDUSTRIAL COMPETITIVENESS COMMISSION PRAMONĖ 4.0 OF 2017 23 April 2018 Vilnius 2 I. Introduction On 19 April 2016, The European Commission (hereinafter referred to as the

More information

Face the future of manufacturing. Visitor information

Face the future of manufacturing. Visitor information Connecting Global Competence Face the future of manufacturing Visitor information The Leading Exhibition for Smart Automation and Robotics June 19 22, 2018 Munich automatica-munich.com automatica. Our

More information

ENGINEER SUCCESS. MicroTechnology Smart Systems for Automation. New markets New customers New networks. NEW TECHNOLOGY FIRST 8 12 April 2013

ENGINEER SUCCESS. MicroTechnology Smart Systems for Automation. New markets New customers New networks. NEW TECHNOLOGY FIRST 8 12 April 2013 ENGINEER SUCCESS New markets New customers New networks MicroTechnology Smart Systems for Automation NEW TECHNOLOGY FIRST 8 12 April 2013 Hannover Germany www.hannovermesse.de/en/industrialautomation MicroTechnology.

More information

Next time in The Heart of Vision Technology November 2014 Messe Stuttgart

Next time in The Heart of Vision Technology November 2014 Messe Stuttgart Next time in 2014 The Heart of Vision Technology www.vision-fair.de 4 6 November 2014 Messe Stuttgart Strong international character All key players of the industry Next time in 2014 Full of innovation

More information

CONNECTING PROFESSIONALS FROM THE WORLDWIDE MARINE INDUSTRY

CONNECTING PROFESSIONALS FROM THE WORLDWIDE MARINE INDUSTRY CONNECTING PROFESSIONALS FROM THE WORLDWIDE MARINE INDUSTRY METSTRADE is the world s leading platform for professionals in the leisure marine equipment industry. This global business platform and community

More information

International. September 29th October 3rd 2014 Brno, Czech Republic. 56 th International Engineering Fair

International. September 29th October 3rd 2014 Brno, Czech Republic. 56 th International Engineering Fair 56 th International Engineering Fair Measuring, control, automation and regulation technology 1 International Engineering Fair September 29th October 3rd 2014 Brno, Czech Republic International Engineering

More information

Connecting Global Competence. Information for exhibitors

Connecting Global Competence. Information for exhibitors Connecting Global Competence Information for exhibitors ceramitec 2018: some of the best It is here that the entire industry comes together. At the heart of innovation. ceramitec is the world s leading

More information

INDUSTRY 4.0 IN THE REGION OF STUTTGART

INDUSTRY 4.0 IN THE REGION OF STUTTGART INDUSTRY 4.0 IN THE REGION OF STUTTGART Third Platform Event of RIM Plus 2015-2016 Developing New Skills for Advanced Manufacturing Brussels, 21 October 2015 Mehmet Kürümlüoğlu Fraunhofer IAO, Competence

More information

Newsletter. A publication of SPE Europe. Kunstoffen 2014 Plastics & Polymers Innovation Award 2014 ANTEC Brussels 2015 Polytalk 2014 And More...

Newsletter. A publication of SPE Europe. Kunstoffen 2014 Plastics & Polymers Innovation Award 2014 ANTEC Brussels 2015 Polytalk 2014 And More... Kunstoffen 2014 Plastics & Polymers Innovation Award 2014 ANTEC Brussels 2015 Polytalk 2014 And More... KUNSTSTOFFEN 2014 September 24-25, 2014 NH Conference Centre Koningshof Veldhoven, Netherlands SPE

More information

Executive Summary World Robotics 2018 Industrial Robots

Executive Summary World Robotics 2018 Industrial Robots Executive Summary World Robotics 2018 Industrial Robots 13 Executive Summary World Robotics 2018 Industrial Robots Robot Sales 2017: Impressive growth In 2017, robot sales increased by 30% to 381,335 units,

More information

Japan s Leading Exhibition for Robotics Technologies Jan. 17[Wed]-19[Fri], 2018 Tokyo Big Sight, Japan

Japan s Leading Exhibition for Robotics Technologies Jan. 17[Wed]-19[Fri], 2018 Tokyo Big Sight, Japan Japan s Leading Exhibition for Robotics Technologies Jan. 17[Wed]-19[Fri], 2018 Tokyo Big Sight, Japan Web: http://www.robodex.jp/en/ POST SHOW REPORT 2018 FACTS & FIGURES 17,186 Visitors 200 Exhibitors

More information

International Laser Technology Congress Networking 4.0: AKL 16 Shows New Ways of Cooperation

International Laser Technology Congress Networking 4.0: AKL 16 Shows New Ways of Cooperation Reviews International Laser Technology Congress Networking 4.0: AKL 16 Shows New Ways of Cooperation Aachen, Germany 27 29 April 2016 Every two years, the Fraunhofer Institute for Laser Technology ILT

More information

TOKYO GAME SHOW 2019 Exhibition Outline Released!

TOKYO GAME SHOW 2019 Exhibition Outline Released! Press Release March 6, 2019 Theme: One World, Infinite Joy TOKYO GAME SHOW 2019 Exhibition Outline Released! Dates: September 12 (Thursday) to September 15 (Sunday), 2019 / Venue: Makuhari Messe Applications

More information

VDI/VDE Innovation + Technik GmbH making high tech a success.

VDI/VDE Innovation + Technik GmbH making high tech a success. VDI/VDE Innovation + Technik GmbH making high tech a success. Our profile We are a leading service provider for questions concerning innovations and technology. funding Innovation Our support and advice

More information

Surface Technology GERMANY

Surface Technology GERMANY Surface Technology GERMANY International trade fair for surface treatments & coatings 5 7 June 2018 Stuttgart Germany surface-technology-germany.de previously O&S All the latest materials All branches

More information

Research & Technology

Research & Technology Research & Technology Leading Trade Fair for R & D and Technology Transfer 23 27 April 2018 Hannover Germany hannovermesse.com #hm18 Parallel to HANNOVER MESSE 2018 13 Solutions for tomorrow s industry.

More information

About the show: Show Overview 3. Show Statistics 4. Visitors: Visitor Statistics 5 7. Exhibitors: Exhibitor Statistics 8 9

About the show: Show Overview 3. Show Statistics 4. Visitors: Visitor Statistics 5 7. Exhibitors: Exhibitor Statistics 8 9 Post Show Report Agenda Content Page About the show: Show Overview 3 Show Statistics 4 Visitors: Visitor Statistics 5 7 Exhibitors: Exhibitor Statistics 8 9 Event: THINKLIGHT: The Convergent Future 10

More information

TCT Asia 2017 [POST SHOW REPORT] Orgainzed by:

TCT Asia 2017 [POST SHOW REPORT]  Orgainzed by: CAD/CAE SOFTWARE 3D PRINTING ADDITIVE MANUFACTURING MOULDING & TOOLING METROLOGY INSPECTION TCT Asia 2017 [POST SHOW REPORT] www.tctasia.com.cn Orgainzed by: 10,000 Sqm 151 Exhibitors 100+ Media Coverage

More information

Mechanical Engineering in Baden-Württemberg High-quality machines, first-class technologies and smart solutions for Industry 4.0 Baden-Württemberg is

Mechanical Engineering in Baden-Württemberg High-quality machines, first-class technologies and smart solutions for Industry 4.0 Baden-Württemberg is Mechanical Engineering in Baden-Württemberg High-quality machines, first-class technologies and smart solutions for Industry 4.0 Baden-Württemberg is the centre of German mechanical engineering Facts and

More information

A European Perspective for Electronic Industry in Latin America

A European Perspective for Electronic Industry in Latin America A European Perspective for Electronic Industry in Latin America François Guibert Corporate Vice President, Emerging Markets Region General Manager Electronic, a Global World Security Networking Consumer

More information

INDUSTRY & INSTITUTION ENGAGEMENT 2017 EVENT ANALYSIS

INDUSTRY & INSTITUTION ENGAGEMENT 2017 EVENT ANALYSIS INDUSTRY & INSTITUTION ENGAGEMENT 2017 EVENT ANALYSIS CONTENTS 2 Introduction 3 Highlights 4 Event Analysis 10 Recommendation Prepared by Industry and Institution Engagement (I2E) 1 I2E Event INTRODUCTION

More information

Into Moving Forward to Automated Driving. In this issue: ITS World Congress in Montreal. CARTRE and ERTRAC Joint Workshop

Into Moving Forward to Automated Driving. In this issue: ITS World Congress in Montreal. CARTRE and ERTRAC Joint Workshop THE NEWSLETTER OF THE CONNECTED AUTOMATED DRIVING IN EUROPE INITIATIVE ISSUE N 4 FEBRUARY 2018 Into 2018 Moving Forward to Automated Driving In this issue: ITS World Congress in Montreal CARTRE and ERTRAC

More information

Vehicle Fiber-Optics and Photonics Conference

Vehicle Fiber-Optics and Photonics Conference International Conference on Vehicle Fiber-Optics and Photonics Conference,, https://optics-photonics.conferenceseries.com/ In vitati on Dear Attendees, We are glad to announce the International Conference

More information

The Tool, Mould & Die Sector and the. Automotive Industry. Uddeholm Automotive Tooling Seminar Sunne / Sweden

The Tool, Mould & Die Sector and the. Automotive Industry. Uddeholm Automotive Tooling Seminar Sunne / Sweden The Tool, Mould & Die Sector and the Automotive Industry Uddeholm Automotive Tooling Seminar Sunne / Sweden The Tool, Mould & Die Sector and the Automotive Industry Uddeholm Automotive Tooling Seminar

More information

2017 POST SHOW REPORT

2017 POST SHOW REPORT 2017 POST SHOW REPORT Dates Venue Organiser January 18 Wed - 20 Fri, 2017 Tokyo Big Sight, Japan Reed Exhibitions Japan Ltd. www.robodex.jp/en/ What is RoboDEX? Comprehensive trade show for robots RoboDEX

More information

INTERNATIONAL INDUSTRIAL EXHIBITION ON MATERIALS & MACHINERIES

INTERNATIONAL INDUSTRIAL EXHIBITION ON MATERIALS & MACHINERIES INTERNATIONAL INDUSTRIAL EXHIBITION ON MATERIALS & MACHINERIES ON DECEMBER 9,10,11-2016 AT CALICUT TRADE CENTER, SWAPNANAGARI, CALICUT 7 EXPOS UNDER ONE ROOF GLOBAL BRANDS. OVER 400 STALLS. MORE THAN 10,000

More information

Business Day Advance Registration Has Begun, and the Convenient Business Day Gold Pass is also On Sale

Business Day Advance Registration Has Begun, and the Convenient Business Day Gold Pass is also On Sale Theme: Welcome to the Next Stage. Press Release July 31, 2018 TGS Forum 2018 Outline of Keynote, Global Game Business Summit 2018 and Expert Sessions Determined! Advance Registration for Business Day Visitors

More information

YOUR WORLD YOUR BUSINESS YOUR SHOW

YOUR WORLD YOUR BUSINESS YOUR SHOW Milan, 8/12 May 2018 fieramilano Rho fairgrounds, Italy YOUR WORLD YOUR BUSINESS YOUR SHOW 26 th biennial world exhibition for woodworking technology and components for the furniture industry Since 1968

More information

From analysis to the future

From analysis to the future Leading International Trade Fair DÜSSELDORF, GERMANY 18 21 NOVEMBER 2019 www.medica.de Member of BE PART OF THE NO. 1! WORLD FORUM FOR MEDICINE From analysis to the future Laboratory equipment and diagnostics

More information

TCT + Personalize Asia 2016 [ POST SHOW REPORT ] Organized by

TCT + Personalize Asia 2016 [ POST SHOW REPORT ]  Organized by TCT + Personalize Asia 2016 [ POST SHOW REPORT ] www.tctasia.com.cn Organized by 7,000 sqm 110 Exhibitors 10,521 Visitors 41 Speakers 530 Conference Delegates 100+ Media Coverage Visitors Primary Industry

More information

17 & 18 OCT DIGITALFIRST.BE

17 & 18 OCT DIGITALFIRST.BE 17 & 18 OCT. 2018 DIGITALFIRST.BE DIGITAL FIRST, YOUR BUSINESS DIGITAL ROADMAP Thanks to more than 10 years of experience, Digital First has evolved and recognized as the leading digital event in Belgium

More information

TECHNOLOGY VISION 2017 IN 60 SECONDS

TECHNOLOGY VISION 2017 IN 60 SECONDS TECHNOLOGY VISION 2017 IN 60 SECONDS GET THE ESSENTIALS THE BIG READ SHORT ON TIME? VIEW HIGHLIGHTS 5 MIN READ VIEW FULL REPORT 45 MIN READ VIEW SHORT REPORT 15 MIN READ OVERVIEW #TECHV1SION2017 2017 TREND

More information

Felix Schoeller Photo Award 2015 takes on a new international quality.

Felix Schoeller Photo Award 2015 takes on a new international quality. PRESS RELEASE For immediate publication Osnabrück, 05 June 2015 Felix Schoeller Photo Award 2015 takes on a new international quality. As the deadline for entries was reached, the second international

More information

Creating the world technology leader in surface solutions under one roof

Creating the world technology leader in surface solutions under one roof Creating the world technology leader in surface solutions under one roof We are the world technology leader in the growing surface solutions market. Combining the complementary strengths of Oerlikon Balzers

More information

The UK s premier vacuum and nanotechnology exhibition & conference

The UK s premier vacuum and nanotechnology exhibition & conference The Technology of Light THE EVENT WHERE LIGHT TECHNOLOGIES COME ALIVE! 12th & 13th October 2016 Ricoh Arena Coventry, UK EXHIBITING BROCHURE WEDNESDAY 12 & THURSDAY 13 OCTOBER 2016 RICOH ARENA COVENTRY

More information

Garching/Munich,

Garching/Munich, Launch of the Digital Hub Mobility Unique collaboration between automobile companies and mobility providers, suppliers, science and the digital sector for the mobility of the future Garching/Munich, 23.02.2017

More information

OUCH THE WORLD S FASTEST GROWING SEMICONDUCTOR MARKET

OUCH THE WORLD S FASTEST GROWING SEMICONDUCTOR MARKET T OUCH THE WORLD S FASTEST GROWING SEMICONDUCTOR MARKET March 19 21, 2013 Shanghai New International Expo Centre Colocated with www.semiconchina.org China A Vibrant and Expanding Semiconductor Market China

More information

Joint Declaration of Intent. of the Ministry of Economy, Trade and Industry of Japan, the Ministry of Internal Affairs and Communications of Japan

Joint Declaration of Intent. of the Ministry of Economy, Trade and Industry of Japan, the Ministry of Internal Affairs and Communications of Japan Joint Declaration of Intent of the Ministry of Economy, Trade and Industry of Japan, the Ministry of Internal Affairs and Communications of Japan and the Federal Ministry for Economic Affairs and Energy

More information

The Fourth Industrial Revolution in Major Countries and Its Implications of Korea: U.S., Germany and Japan Cases

The Fourth Industrial Revolution in Major Countries and Its Implications of Korea: U.S., Germany and Japan Cases Vol. 8 No. 20 ISSN -2233-9140 The Fourth Industrial Revolution in Major Countries and Its Implications of Korea: U.S., Germany and Japan Cases KIM Gyu-Pan Director General of Advanced Economies Department

More information

Welcome to the IFR Press Conference 18 October 2018 Tokyo

Welcome to the IFR Press Conference 18 October 2018 Tokyo Welcome to the IFR Press Conference 18 October 2018 Tokyo Agenda Welcome Presentation of the speakers World Robotics 2018 Industrial Robots Review 2017 and forecast 2018-2021 Main markets customers - trends

More information

Welcome to the IFR Press Conference 30 August 2012, Taipei

Welcome to the IFR Press Conference 30 August 2012, Taipei Welcome to the IFR Press Conference 3 August 212, Taipei Continued success of the robotics industry Welcome by IFR President Dr. Shinsuke Sakakibara Presentation of the results of World Robotics 212 Industrial

More information

Executive summary. AI is the new electricity. I can hardly imagine an industry which is not going to be transformed by AI.

Executive summary. AI is the new electricity. I can hardly imagine an industry which is not going to be transformed by AI. Executive summary Artificial intelligence (AI) is increasingly driving important developments in technology and business, from autonomous vehicles to medical diagnosis to advanced manufacturing. As AI

More information

Statements about the fair

Statements about the fair 23. Weltleitmesse und Kongress für Komponenten, Systeme und Anwendungen der Photonik 26. 29. Juni 2017, Messe München 23rd International Trade Fair and Congress for Photonics Components, Systems and Applications

More information

OCTOBER 20-23, 2015 Brno - Czech republic

OCTOBER 20-23, 2015 Brno - Czech republic 14 th International Fair for Wood and Furniture Industry www.wood-tec.cz OCTOBER 20-23, 2015 Brno - Czech republic WOOD-TEC 2015 FINAL REPORT The 14th edition of the International Fair for Wood and Furniture

More information

The Seventh China-EU Summit Held in The Hague, the Netherlands

The Seventh China-EU Summit Held in The Hague, the Netherlands The Seventh China-EU Summit Held in The Hague, the Netherlands Renewal of China-EU Science and Technology Co-operation Agreement Presence at the Sixth China High-Tech Fair in Shenzhen China-Greece Workshop

More information

MAGNA EXPO MUEBLERA INDUSTRIAL

MAGNA EXPO MUEBLERA INDUSTRIAL MAGNA EXPO MUEBLERA INDUSTRIAL Leading Trade Fair for Wood Processing, Woodworking and Furniture Manufacturing January 17-20, 2018 Centro Citibanamex, Mexico City, Mexico www.hfmexico.mx 2018 Deutsche

More information

EXHIBITOR INFORMATION BE PART OF THE #VIECC

EXHIBITOR INFORMATION BE PART OF THE #VIECC EXHIBITOR INFORMATION BE PART OF THE November 19th 20th, 2016 #VIECC VIECC Vienna Comic Con This is the premiere pop culture event in Central and Eastern Europe: Thousands of enthusiastic fans; spectacular

More information

NOVEMBER 20 21, 2018 SMARTVILLAGE, MUNICH

NOVEMBER 20 21, 2018 SMARTVILLAGE, MUNICH NOVEMBER 20 21, 2018 SMARTVILLAGE, MUNICH shutterstock.com - agsandrew Sponsors: Organisation Partner: Organized by: We make Artificial Intelligence tangible for you. The German edition of the MIT Technology

More information

TOKYO GAME SHOW 2018 Exhibition Outline Released!

TOKYO GAME SHOW 2018 Exhibition Outline Released! Press Release March 5, 2018 Theme: Welcome to the Next Stage. TOKYO GAME SHOW 2018 Exhibition Outline Released! Dates: September 20 (Thursday) to September 23 (Sunday), 2018 / Venue: Makuhari Messe Applications

More information

Short Presentation of the AGRITECHNICA in Hannover

Short Presentation of the AGRITECHNICA in Hannover with the support of Short Presentation of the AGRITECHNICA in Hannover Marie SERVAIS Projectmanager AGRITECHNICA CLIMMAR Congress 5-7 October 2017 CLIMMAR CONGRESS 2017 06 OCTOBER 2017 DLG MARIE SERVAIS

More information

THERE IS NO PLACE LIKE HOME

THERE IS NO PLACE LIKE HOME THERE IS NO PLACE LIKE HOME Home of the visible Champions OEMs come to HANNOVER MESSE to showcase their products and services at what is considered the home of industrial pioneers. They also want to meet

More information

THE ITALIAN MACHINE TOOL ROBOT AND AUTOMATION INDUSTRY

THE ITALIAN MACHINE TOOL ROBOT AND AUTOMATION INDUSTRY THE ITALIAN MACHINE TOOL ROBOT AND AUTOMATION INDUSTRY MAJOR MANUFACTURING COUNTRIES IN 2016 China 20,687 +3.9% Germany Japan United States Italy South Korea Taiwan Switzerland 3,370 2,700 3,901 5,341

More information

Sales of computer and video games increase by 11 per cent in the first six months of 2017

Sales of computer and video games increase by 11 per cent in the first six months of 2017 Press release BIU, the German Games Industry Association Sales of computer and video games increase by 11 per cent in the first six months of 2017 Nearly 18 million people in Germany play games with others

More information

»INDUSTRIAL DATA SPACE AND THE NEED FOR TRANSFORMING MANUFACTURING IN EMERGING

»INDUSTRIAL DATA SPACE AND THE NEED FOR TRANSFORMING MANUFACTURING IN EMERGING INDUSTRY 4.0»INDUSTRIAL DATA SPACE AND THE NEED FOR TRANSFORMING MANUFACTURING IN EMERGING ECONOMIES «Kay Matzner Fraunhofer Gesellschaft (IFF) Germany Manufuture 2017 October 24 Tallinn-Estonia Nmedia

More information

Summary. Export Countries: England, Switzerland, Japan, South Korea, United States, Russia, China, Spain, Italy, Japan, France and Germany.

Summary. Export Countries: England, Switzerland, Japan, South Korea, United States, Russia, China, Spain, Italy, Japan, France and Germany. COMPANY PROFILE Summary Established in 1993, Altai Cashmere LLC has a rich history spanning 25 years. It is one of the subsidiaries of Altai Holding LLC, one of the largest conglomerates in Mongolia. Altai

More information

Metro Finance and DBS Bank present: Hong Kong ASEAN Summit 2015 The New ASEAN Economy under the One Belt, One Road

Metro Finance and DBS Bank present: Hong Kong ASEAN Summit 2015 The New ASEAN Economy under the One Belt, One Road Press Release For Immediate Release Metro Finance and DBS Bank present: Hong Kong ASEAN Summit 2015 The New ASEAN Economy under the One Belt, One Road 14 September 2015 As part of China s wider economic

More information

Participation Guide.

Participation Guide. Participation Guide FOOD YTECHNOLOG 15 2018 www.foomajapan.jp Organized by: The Japan Food Machinery Manufacturers Association Supported by: The Ministry of Economy, Trade and Industry; The Ministry of

More information

ICT Call Total budget M Many types of topics. Deadline 12 April 2016

ICT Call Total budget M Many types of topics. Deadline 12 April 2016 H2020 ICT CALL 2016 ICT call topic areas A new generation of components and systems Advanced Computing and Cloud Computing Future Internet Content Big Data Robotics and Autonomous Systems ICT Key Enabling

More information

Landscape of the European Chemical Industry 2017

Landscape of the European Chemical Industry 2017 Germany Verband der Chemischen Industrie e.v. (VCI) Number of companies Turnover 2,000 188.7 billion National contact Direct Employees 446,282 Utz Tillmann Director General utz.tillmann@vci.de CHEMICAL

More information

Press release 04/04/2018

Press release 04/04/2018 04/04/2018 Information Initiative at the Hannover Fair 2018 Research findings by the University of Stuttgart at the world s most significant trade fair Over the past years of international trade fair commitment

More information

Germany s Leading-Edge Cluster Competition A contribution to raising Europe s profile as a prime location for innovation

Germany s Leading-Edge Cluster Competition A contribution to raising Europe s profile as a prime location for innovation Germany s Leading-Edge Cluster Competition A contribution to raising Europe s profile as a prime location for innovation Speech by Dr. Georg Schütte, State Secretary at the Federal Ministry of Education

More information

27-29 June, 2017 Shanghai, China. Analysis

27-29 June, 2017 Shanghai, China. Analysis 27-29 June, 2017 Shanghai, China Analysis 2017-1 - 2 3 Concept The PCIM (short for Power Conversion, Intelligent Motion) event in China is an international meeting ground for specialists in power electronics

More information

AUTOMOTIVE ENGINEERING

AUTOMOTIVE ENGINEERING 30-31.5. 2017 TAKE YOUR BUSINESS TO THE NEXT LEVEL IN N RNBERG, GERMANY AUTOMOTIVE-ENGINEERING-EXPO.COM AUTOMOTIVE ENGINEERING EXPO 2017 CAR BODY PROCESS CHAIN FROM CONCEPT TO FINAL ASSEMBLY Powered by

More information

ITSC 2017 Successfully Paved the Way to the Stars

ITSC 2017 Successfully Paved the Way to the Stars PRESS INFORMATION 1/ ITSC 2017 Successfully Paved the Way to the Stars Düsseldorf/Essen, June 27, 2017. "Thermal Spray Paves the Way to the Stars!" - That was the motto of this year's International Thermal

More information

EXECUTIVE SUMMARY. Robot sales to the fabricated metal products industry, the chemical industry and the food industry increased substantially.

EXECUTIVE SUMMARY. Robot sales to the fabricated metal products industry, the chemical industry and the food industry increased substantially. 2006 World Robot Market EXECUTIVE SUMMARY Total world-wide sales: 112,200 units, down 11% on 2005 World total stock of operational industrial robots: 951,000 units,3% greater than 2005 The world market

More information

Main lessons learned from the German national innovation system

Main lessons learned from the German national innovation system Main lessons learned from the German national innovation system May 2016 Introduction Germany has one of the most powerful national innovation systems in the world. On the 2015 Global Innovation Index,

More information

www.thomas-magnete.com History of the Company Milestones Thomas Magnete founded by Hermann Thomas Development of first proportional solenoid for hydraulic applications Thomas becomes an independent German

More information

The Economic Importance of Welding and Joining in Europe Production Values, Values Added and Employees

The Economic Importance of Welding and Joining in Europe Production Values, Values Added and Employees The Economic Importance of Welding and Joining in Europe Production Values, Values Added and Employees Dr.-Ing. Klaus Middeldorf DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.v. (German

More information

International Collaboration Tools for Industrial Development

International Collaboration Tools for Industrial Development International Collaboration Tools for Industrial Development 6 th CSIR Conference 5-6 October, 2017 Dan Nagy Managing Director IMS International dnagy@ims.org U.S. DEPARTMENT OF COMMERCE (NIST) 28 Countries

More information

INTRODUCING OUR FIRST EVER INSIGHT NEWSLETTER

INTRODUCING OUR FIRST EVER INSIGHT NEWSLETTER INSIGHT Newsletter INTRODUCING OUR FIRST EVER INSIGHT NEWSLETTER Actually, that s a lie... our McGavigan employees have been reading INSIGHT for the last five years. However, we have now decided that it

More information

Structural Biology EURO STRUCTURAL BIOLOGY Theme: Exploring the Future Advancements in Structural and Molecular Biology. 15 th World Congress on

Structural Biology EURO STRUCTURAL BIOLOGY Theme: Exploring the Future Advancements in Structural and Molecular Biology. 15 th World Congress on 15 th World Congress on Structural Biology November 19-20, 2018 Paris, France Theme: Exploring the Future Advancements in Structural and Molecular Biology Invitation Dear Attendees, We are glad to announce

More information

Press release II / 2017 Dresdner scientists print tomorrow s world

Press release II / 2017 Dresdner scientists print tomorrow s world Press release II / 2017 Dresdner scientists print tomorrow s world The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden

More information

Information as of Oct Post Show Report Shanghai Intelligent Building Technology & Shanghai Smart Home Technology Post Show Report

Information as of Oct Post Show Report Shanghai Intelligent Building Technology & Shanghai Smart Home Technology Post Show Report Information as of Oct 2015 Post Show Report China s premier platform for intelligent building and smart home technology Shanghai Intelligent Building Technology held its 9 th edition during 23-25 September

More information

AOG 2O15 PREVIEW SHELL WOODSIDE CHEVRON SHELL WOODSIDE C & 2014 SHOW REPORT OLUTIONS TECHNIP SUBSEA 7 SAIPEM FMC TECHNOLOGIES CAM

AOG 2O15 PREVIEW SHELL WOODSIDE CHEVRON SHELL WOODSIDE C & 2014 SHOW REPORT OLUTIONS TECHNIP SUBSEA 7 SAIPEM FMC TECHNOLOGIES CAM L WOODSIDE CHEVRON SHELL WOODSIDE CHEVR OLUTIONS TECHNIP SUBSEA 7 SAIPEM FMC TECHNOLOGIES CAM SHELL WOODSIDE CHEVRON SHELL WOODSIDE C FMC TECHNOLOGIES CAMERON AKER SOLUTIONS TECHNIP SUB L WOODSIDE CHEVRON

More information

Firm Foundation, Forward Focus

Firm Foundation, Forward Focus Firm Foundation, Forward Focus a timeline history of A.T. Kearney Our success as consultants will depend upon the ESSENTIAL RIGHTNESS of the advice we give and our capacity for convincing those in authority

More information

Franco German press release. following the interview between Ministers Le Maire and Altmaier, 18 December.

Franco German press release. following the interview between Ministers Le Maire and Altmaier, 18 December. Franco German press release following the interview between Ministers Le Maire and Altmaier, 18 December. Bruno Le Maire, Minister of Economy and Finance, met with Peter Altmaier, German Federal Minister

More information

INTERNATIONAL EXHIBITION MOULDS. DIE-MOULDS. STAMPS JUNE 2015, MOSCOW CROCUS EXPO

INTERNATIONAL EXHIBITION MOULDS. DIE-MOULDS. STAMPS JUNE 2015, MOSCOW CROCUS EXPO INTERNATIONAL EXHIBITION MOULDS. DIE-MOULDS. STAMPS. 23-25 JUNE 2015, MOSCOW CROCUS EXPO ROSMOULD 2015, a world-class specialized trade fair for mold-making, prototyping and 3D technologies, is celebrating

More information

Exploring the full potential of Industry 4.0 in plastics processing

Exploring the full potential of Industry 4.0 in plastics processing INSTITUT FÜR KUNSTSTOFFVERARBEITUNG IN INDUSTRIE UND HANDWERK AN DER RWTH AACHEN Exploring the full potential of Industry 4.0 in plastics processing Joint potential analysis and readiness study (Arburg)

More information

e-dialistic future Science Standards Testing

e-dialistic future Science Standards Testing e-dialistic future Science Standards Testing Partners for future technologies The future taps the past The VDE is the association for electrical engineering, electronics and information technologies, the

More information

Robotics and Automation at a glance

Robotics and Automation at a glance Robotics + Automation Robotics and Automation at a glance The sector the association the suppliers 2 ROBOTICS + AUTOMATION About the sector* Sector turnover: 15.8 bn EUR Employees: > 60.000 Export ratio:

More information

Combined expertise in the field of optical 3D gauging technology ensures market advantage

Combined expertise in the field of optical 3D gauging technology ensures market advantage Expertise in optical 3D gauging technology expanded Combined expertise in the field of optical 3D gauging technology ensures market advantage Darmstadt, September 13, 2012 - ISRA VISION AG, a world leader

More information

News from "Your Partner for Excellence in Optics"

News from Your Partner for Excellence in Optics News from "Your Partner for Excellence in Optics" Advanced Optics Newsletter 03 / 2012 Advanced Optics website reveals new look Content: Modern and target group oriented: the new SCHOTT Advanced Optics

More information

Follow-up from WEILBURGER Graphics at interpack and IST UV-Days

Follow-up from WEILBURGER Graphics at interpack and IST UV-Days Press release for immediate publication Follow-up from WEILBURGER Graphics at interpack and IST UV-Days Gerhardshofen, June 25 th 2017 WEILBURGER Graphics GmbH, based in Gerhardshofen, Franconia, can look

More information

POST-SHOW REPORT GLOBAL PETROLEUM SHOW GLOBALPETROLEUMSHOW.COM JUNE 12-14, 2018 CALGARY, CANADA NORTH AMERICA S LEADING ENERGY EVENT

POST-SHOW REPORT GLOBAL PETROLEUM SHOW GLOBALPETROLEUMSHOW.COM JUNE 12-14, 2018 CALGARY, CANADA NORTH AMERICA S LEADING ENERGY EVENT GLOBAL PETROLEUM SHOW NORTH AMERICA S LEADING ENERGY EVENT JUNE 12-14, 2018 CALGARY, CANADA POST-SHOW REPORT GLOBALPETROLEUMSHOW.COM STAKEHOLDERS GOLD SPONSORS CONFERENCE SPONSOR ORGANIZED BY POST-SHOW

More information

Newsletter 2017Q4. 3D Printing Talk in CityU. Seminar on 3D printing made a new era of plastics industry

Newsletter 2017Q4. 3D Printing Talk in CityU. Seminar on 3D printing made a new era of plastics industry 3D Printing Talk in CityU Bobby shared his entrepreneurial journey with CityU students Seminar on 3D printing made a new era of plastics industry Visited University Research Facility in 3D Printing Newsletter

More information

Facing the Future: Additive Manufacturing SECOND ROUND. Call for Partners: Consortium Study. Our partners:

Facing the Future: Additive Manufacturing SECOND ROUND. Call for Partners: Consortium Study. Our partners: Facing the Future: Additive Manufacturing SECOND ROUND Call for Partners: Consortium Study Our partners: Additive Manufacturing: The New Industrial Revolution? Motivation Costs for additive manufactured

More information

Automotive Industry in Baden-Württemberg World-class vehicles, innovative technologies, intelligent mobility solutions Baden-Württemberg is a leading

Automotive Industry in Baden-Württemberg World-class vehicles, innovative technologies, intelligent mobility solutions Baden-Württemberg is a leading Automotive Industry in Baden-Württemberg World-class vehicles, innovative technologies, intelligent mobility solutions Baden-Württemberg is a leading location of the global automotive industry Facts and

More information

Press Release 19 December 2017

Press Release 19 December 2017 3 rd Symposium on Driving Simulation Experts discuss the technical progress of driving simulation en route to autonomous driving Fellbach/Stuttgart, - Around 75 participants gathered in Braunschweig on

More information

$ 100M INVESTMENT IN AVIATION INDUSTRY PANOS XENOKOSTAS PRESIDENT & CEO ONEX TECHNOLOGIES INC ONEX SA

$ 100M INVESTMENT IN AVIATION INDUSTRY PANOS XENOKOSTAS PRESIDENT & CEO ONEX TECHNOLOGIES INC ONEX SA $ 100M INVESTMENT IN AVIATION INDUSTRY PANOS XENOKOSTAS PRESIDENT & CEO ONEX TECHNOLOGIES INC ONEX SA ONEX SA successfully realizes complex, challenging projects in Greece as well as abroad, in the fields

More information

CABSAT.COM MAR 2019 DUBAI WORLD TRADE CENTRE OFFICIAL SHOW PREVIEW. Organised

CABSAT.COM MAR 2019 DUBAI WORLD TRADE CENTRE OFFICIAL SHOW PREVIEW. Organised CABSAT.COM 12-14 MAR 2019 DUBAI WORLD TRADE CENTRE OFFICIAL SHOW PREVIEW @CABSATofficial Organised by GET READY FOR THE 25TH EDITION OF CABSAT! The region s leading event for the broadcast, satellite,

More information

Presse- Information. First of its kind: nibbler for fiber composite materials

Presse- Information. First of its kind: nibbler for fiber composite materials First of its kind: nibbler for fiber composite materials Handheld TRUMPF power tool punches CFRP // Drastic reduction in emissions // Long service life of wear parts Ditzingen, April 2017 TRUMPF has developed

More information

Industrie 4.0 in a Global Context

Industrie 4.0 in a Global Context acatech STUDY Industrie 4.0 in a Global Context Strategies for Cooperating with International Partners Henning Kagermann, Reiner Anderl, Jürgen Gausemeier, Günther Schuh, Wolfgang Wahlster (Eds.) The acatech

More information

ON THE WAY TO INDUSTRY 4.0 : DIGITAL ENTERPRISE. Ali Rıza Ersoy March, 2016 v2.0

ON THE WAY TO INDUSTRY 4.0 : DIGITAL ENTERPRISE. Ali Rıza Ersoy March, 2016 v2.0 ON THE WAY TO INDUSTRY 4.0 : DIGITAL ENTERPRISE Ali Rıza Ersoy March, 2016 v2.0 GOOGLE TRENDS First assembly line Cincinnati USA, 1870 HISTORY? FIRST INDUSTRIAL REVOLUTION Mechanical Steam Power First

More information

)XWXUH FKDOOHQJHV IRU WKH WRXULVP VHFWRU

)XWXUH FKDOOHQJHV IRU WKH WRXULVP VHFWRU 63((&+ 0U(UNNL/LLNDQHQ Member of the European Commission, responsible for Enterprise and the Information Society )XWXUH FKDOOHQJHV IRU WKH WRXULVP VHFWRU ENTER 2003 Conference +HOVLQNL-DQXDU\ Ladies and

More information

Nanotechnology and Advanced Materials

Nanotechnology and Advanced Materials Nanotechnology and Advanced Materials in the Czech Republic www.czechinvest.org Investment Success Stories Toray Textiles Central Europe a.s. We have been operating in the Czech Republic since 1997. For

More information

FOCUSED EXHIBITION ON

FOCUSED EXHIBITION ON w w w. n e p a l w o o d. c o m. n p FEB 15-17, 2019 BHRIKUTIMANDAP, KATHMANDU, NEPAL FOCUSED EXHIBITION ON Concurrent Event Panels & Plywood Woodworking Machinery Furniture Production Technologies Laminates

More information

IMPACT REPORT ELABORATED BY

IMPACT REPORT ELABORATED BY IMPACT REPORT ELABORATED BY Executive Summary This study was based on the informations published and / or broadcasted on Global Robot Expo in the period between the 1st of January of 2015 until the 19th

More information