LiM - Lasers in Manufacturing 2011 Part 1
|
|
- Britney Willis
- 5 years ago
- Views:
Transcription
1 M. Schmidt, M. F. Zaeh, T. Graf, A. Ostendorf LiM - Lasers in Manufacturing 2011 Part 1 Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing Munich, Germany May 23-26, 2011
2
3 LiM - Lasers in Manufacturing 2011 Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing Munich, Germany May 23-26, 2011 Edited by M. Schmidt, M. F. Zaeh, T. Graf, A. Ostendorf for the German Scientific Laser Society (WLT) Part 1 Elsevier B.V. Amsterdam 2011
4 Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing Munich, Germany, May 23-26, 2011 Edited by M. Schmidt, M. F. Zaeh, T. Graf, A. Ostendorf for the German Scientific Laser Society (WLT) Amsterdam: Elsevier B.V., 2011 ISSN of Physics Procedia: This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically those of translation, reprinting, reuse of illustrations, broadcasting, reproduction by photocopying machine or similar means and storage in data banks. Under 54 of the German Copyright Law, where copies are made for other than private use, a fee is payable to Verwertungsgesellschaft Wort, Munich. Elsevier B.V., Radarweg 29, 1043 NX Amsterdam, The Netherlands Copyright by M. Schmidt, M. F. Zaeh, T. Graf, A. Ostendorf, Germany, 2011 The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevance of protective laws and regulations and therefore free for general use. Layout: Institute for Machine Tools and Industrial Management (Technische Universität München), Bayerisches Laserzentrum GmbH Print: Elsevier B.V., Radarweg 29, 1043 NX Amsterdam, The Netherlands
5 Preface The current global interest is strongly affected by social, economical and environmental trends of the last decades such as globalisation, global warming, shortage of energy resources or even the financial crisis. Modern research has to focus on these trends to provide solutions for the existing and upcoming global challenges. Sustainable manufacturing is one of the current challenges in our discipline. Therefore, an efficient and resource-saving application of laser technologies in production has to be advanced. An enduring professional exchange between scientists from all over the world is necessary to tap the full potential in research. With the international conference on Lasers in Manufacturing (LiM), the German Scientific Laser Society (WLT) offers an open platform for such an international professional exchange in the field of laser material processing. Thus, we warmly welcome all our participants and look forward to share ideas in motivated talks and lively discussions. Besides the scientific exchange the LiM conference supports the direct knowledge transfer of experts from research and industry and vice versa. This guarantees mutual benefit, since scientific advances and economical needs are complied. Therefore, we pursued the strategy to hold LiM with scientific and industrial contributions. In these proceedings, as well as online on Elsevier's Physics Procedia, only the scientific contributions, that met the high standard of the scientific committee's review process, are provided. The industrial contributions, which are not evaluated based on scientific criteria but on their relevance for application, will be presented vocally at the LiM conference. The audience is invited to explore the vast field of laser material processing from a scientific but also from an industrial point of view. We hope that these proceedings, reflecting the state of the art, provide a precious basis and source for inspirations to meet the challenges we are facing in the future. Munich, May 2011 The Editors M. Schmidt M. F. Zaeh T. Graf A. Ostendorf
6 International Scientific Committee Arnold, C., Princeton University, New Jersey, USA Aubry, P., Arts et Métiers ParisTech, Paris, France Bergmann, R., BIAS, Bremen, Germany Beyer, E., Fraunhofer IWS, Dresden, Germany Emmelmann, C., Technische Universität Hamburg-Harburg, Germany Fabbro, R., Coopération Laser Franco-Allemande, Paris, France Geiger, M., Bayerisches Laserzentrum, Erlangen, Germany Goch, G., University of Bremen, Germany Hilton, P., The Welding Institute, Cambridge, UK Hügel, H., University of Stuttgart, Germany Hugenschmidt, M., ISL, Saint-Louis, France Huis in `t Veld, A. J., University of Twente, The Netherlands Jüptner, W., University of Aberdeen, UK Kaplan, A., Luleå University of Technology, Sweden Katayama, S., Osaka University, Japan Klocke, F., Fraunhofer IPT, Aachen, Germany Konov, V. I., Russian Academy of Sciences, Moscow, Russia Leipertz, A., University of Erlangen-Nürnberg, Germany Levy, G. N., inspire AG, St. Gallen, Switzerland Loosen, P., RWTH Aachen, Germany Miyamoto, I., Osaka University, Japan Neuenschwander, B., Swisslaser Net, Switzerland Osten, W., University of Stuttgart, Germany Overmeyer, L., Laser Zentrum Hannover, Germany Pfeifer, T., RWTH Aachen, Germany Piqué, A., Naval Research Laboratory, Washington, USA Poprawe, R., Fraunhofer ILT, Aachen, Germany Romano, V., University of Bern, Switzerland Schmitt, R., RWTH Aachen, Germany Sugioka, K., RIKEN, Wako, Japan Tiziani, H. J., University of Stuttgart, Germany Vollertsen, F., BIAS, Bremen, Germany Weingärtner, W., University of Santa Catarina, Brazil
7 Chairmen & Conference Offices General Chair M. Schmidt, University of Erlangen-Nürnberg, Germany Chair Subconference Macro Processing M. F. Zaeh, Technische Universität München, Germany Chair Subconference Micro Processing T. Graf, University of Stuttgart, Germany Chair Joint Sessions with ECLEO (for LiM) A. Ostendorf, Ruhr-Universität Bochum, Germany Office General Chair H.-J. Krauß, Bayerisches Laserzentrum GmbH, Germany C. Brock, University of Erlangen-Nürnberg, Germany S. Eckert, Bayerisches Laserzentrum GmbH, Germany Office WLT R. Wiedenmann, Technische Universität München, Germany LiM 2011 is organized by the German Scientific Laser Society (WLT) in cooperation with the Bayerisches Laserzentrum GmbH (blz) and the Chair of Photonic Technologies, University of Erlangen-Nürnberg (LPT) We wish to sincerely thank Messe München GmbH and our partners
13 th International Laser Processing and Systems Conference(LPC 2018)
13 th International Laser Processing and Systems Conference(LPC 2018) I. About the conference In order to promote the continuous innovation of laser technology in China, the 13th International Laser Processing
More informationICT for the Next Five Billion People
ICT for the Next Five Billion People Arnold Picot Josef Lorenz Editors ICT for the Next F Five Billion People Information and Communication for Sustainable Development Editors Prof. Dr. Dr. Arnold Picot
More informationRequirements Engineering for Digital Health
Requirements Engineering for Digital Health Samuel A. Fricker Christoph Thümmler Anastasius Gavras Editors Requirements Engineering for Digital Health Editors Samuel A. Fricker Blekinge Institute of Technology
More informationEnabling Manufacturing Competitiveness and Economic Sustainability
Enabling Manufacturing Competitiveness and Economic Sustainability Hoda A. ElMaraghy Editor Enabling Manufacturing Competitiveness and Economic Sustainability Proceedings of the 4th International Conference
More information(Fraunhofer Society for applied Research)
(Fraunhofer Society for applied Research) The Fraunhofer Organisation Was founded in 1949 and is recognized as a non-profit organisation The leading organisation of applied research in Germany 58 research
More informationAdvanced Electronic Circuits
U. Tietze Ch. Schenk Advanced Electronic Circuits Wi th the Assistance of E. Schmid With 570 Figures Springer-Verlag Berlin Heidelberg New York 1978 Dr.-Ing. Ulrich Tietze Dr.-Ing. Christoph Schenk Universitat
More informationTrends in Logic. Volume 45
Trends in Logic Volume 45 TRENDS IN LOGIC Studia Logica Library VOLUME 45 Editor-in-Chief Heinrich Wansing, Ruhr-University Bochum, Bochum, Germany Editorial Assistant Andrea Kruse, Ruhr-University Bochum,
More informationEffects of spherical aberrations on micro welding of glass using ultra short laser pulses
Available online at www.sciencedirect.com Physics Procedia 39 (2012 ) 563 568 LANE 2012 Effects of spherical aberrations on micro welding of glass using ultra short laser pulses Kristian Cvecek a,b,, Isamu
More informationCOOP 2016: Proceedings of the 12th International Conference on the Design of Cooperative Systems, May 2016, Trento, Italy
Antonella De Angeli Liam Bannon Patrizia Marti Silvia Bordin Editors COOP 2016: Proceedings of the 12th International Conference on the Design of Cooperative Systems, 23-27 May 2016, Trento, Italy COOP
More informationFactory in a Day Project Reducing System Integration Time to One Day. Alexander Bubeck March 27th, 2015
Factory in a Day Project Reducing System Integration Time to One Day Alexander Bubeck March 27th, 2015 Outline Fraunhofer IPA Goals of Factory in a Day (FiaD) Consortium as a whole Roles of ROS Industrial
More informationSpringerBriefs in Space Development
SpringerBriefs in Space Development Guest Editor: Jinyuan Su More information about this series at http://www.springer.com/series/10058 Joseph N. Pelton New Solutions for the Space Debris Problem Joseph
More informationIIW Collection. Series editor IIW International Institute of Welding, ZI Paris Nord II, Villepinte, France
IIW Collection Series editor IIW International Institute of Welding, ZI Paris Nord II, Villepinte, France The IIW Collection of Books is authored by experts from the 59 countries participating in the work
More informationIntroduction to VI-HPS
Introduction to VI-HPS Martin Schulz Technische Universität München Virtual Institute High Productivity Supercomputing Goal: Improve the quality and accelerate the development process of complex simulation
More information3-Dimensional Process Simulation
1. Lorenz (ed.) 3-Dimensional Process Simulation Springer-Verlag Wien New York J. Lorenz Fraunhofer-Institut fur Integrierte Schaltungen Bauelementetechnologie Schottkystrasse 10 D-91058 Erlangen This
More informationDesign for Innovative Value Towards a Sustainable Society
Design for Innovative Value Towards a Sustainable Society Mitsutaka Matsumoto Yasushi Umeda Keijiro Masui Shinichi Fukushige Editors Design for Innovative Value Towards a Sustainable Society Proceedings
More informationPress release II / 2017 Dresdner scientists print tomorrow s world
Press release II / 2017 Dresdner scientists print tomorrow s world The Fraunhofer IWS Dresden and Technische Universität Dresden inaugurated their jointly operated Center for Additive Manufacturing Dresden
More informationU. Lindemann (Ed.) Human Behaviour in Design
U. Lindemann (Ed.) Human Behaviour in Design Springer-Verlag Berlin Heidelberg GmbH Engineering ONLINE LIBRARY http://www.springer.de/engine/ Udo Lindemann (Ed.) Human Behaviour in Design Individuals,
More informationFrom the SelectedWorks of Hee-Eun Kim. September, 2011
From the SelectedWorks of Hee-Eun Kim September, 2011 The Role of the Patent System in Stimulating Innovation and Technology Transfer for Climate Change (Including Aspects of Licensing and Competition
More informationFirst Intercontinental Maritime Simulation Symposium and Mathematical Modelling Workshop, Munich June 3-5, 1985
Maritime Simulation Proceedings of the First Intercontinental Symposium Munich, June 1985 Edited by Moshe R. Heller, CONTR..OL DATA With 104 Figures Springer-Verlag Berlin Heidelberg New York Tokyo 1985
More informationVISIONS on Composites Innovation in Automotive, Aerospace and more
Programme & Speakers Date: Monday 13th March 2017 Location: Pullman Hotel Paris Tour Eiffel VISIONS on Composites Innovation in Automotive, Aerospace and more About sampe SAMPE is a global organization
More informationTechnology Roadmapping for Strategy and Innovation
Technology Roadmapping for Strategy and Innovation Martin G. Moehrle, Ralf Isenmann, and Robert Phaal (Eds.) Technology Roadmapping for Strategy and Innovation Charting the Route to Success ABC Editors
More informationFuture-Oriented Technology Analysis
Future-Oriented Technology Analysis Cristiano Cagnin Michael Keenan Ron Johnston Fabiana Scapolo Rémi Barré Editors Future-Oriented Technology Analysis Strategic Intelligence for an Innovative Economy
More informationPrivacy, Data Protection and Cybersecurity in Europe
Privacy, Data Protection and Cybersecurity in Europe Wolf J. Schünemann Max-Otto Baumann Editors Privacy, Data Protection and Cybersecurity in Europe Editors Wolf J. Schünemann Institute for Social Sciences
More informationLecture Notes in Computer Science
Lecture Notes in Computer Science Edited by G. Goos and J. Hartmanis 49 Interactive Systems Proceedings, 6th Informatik Symposium IBM Germany, Bad Homburg v. d. H., September 1976 Edited by A. Blaser and
More informationArchitecture Design and Validation Methods
Architecture Design and Validation Methods Springer-Verlag Berlin Heidelberg GmbH Egon Börger (Ed.) Architecture Design and Validation Methods With 175 Figures, Springer Editor Prof. Dr. Egon Börger Universita
More informationFounding Editor Martin Campbell-Kelly, University of Warwick, Coventry, UK
History of Computing Founding Editor Martin Campbell-Kelly, University of Warwick, Coventry, UK Series Editor Gerard Alberts, University of Amsterdam, Amsterdam, The Netherlands Advisory Board Jack Copeland,
More informationEUKO 2017 Communication and Digitization
17th interdisciplinary conference of the research network European Cultures in Business and Corporate Communication (EUKO) EUKO 2017 Communication and Digitization 19th 21st October 2017 Frankfurt/Main
More informationTECHNOLOGY, INNOVATION, and POLICY 3. Series of the Fraunhofer Institute for Systems and Innovation Research (lsi)
TECHNOLOGY, INNOVATION, and POLICY 3 Series of the Fraunhofer Institute for Systems and Innovation Research (lsi) Guido Reger Ulrich Schmoch (Eds.) Organisation of Science and Technology at the Watershed
More informationPhilosophy of Engineering and Technology
Philosophy of Engineering and Technology Volume 23 Editor-in-chief Pieter E. Vermaas, Delft University of Technology, The Netherlands General and overarching topics, design and analytic approaches Editors
More informationExplaining Technical Change in a Small Country. The Finnish National Innovation System
Explaining Technical Change in a Small Country The Finnish National Innovation System ETLA - The Research Institute of the Finnish Economy Series B84 The Research Institute ofthe Finnish Economy (ETLA)
More informationThe Test and Launch Control Technology for Launch Vehicles
The Test and Launch Control Technology for Launch Vehicles Zhengyu Song The Test and Launch Control Technology for Launch Vehicles 123 Zhengyu Song China Academy of Launch Vehicle Technology Beijing China
More informationInternational Laser Technology Congress Networking 4.0: AKL 16 Shows New Ways of Cooperation
Reviews International Laser Technology Congress Networking 4.0: AKL 16 Shows New Ways of Cooperation Aachen, Germany 27 29 April 2016 Every two years, the Fraunhofer Institute for Laser Technology ILT
More informationStraBer Wahl Graphics and Robotics
StraBer Wahl Graphics and Robotics Wolfgang StrafSer Friedrich Wahl Editors Graphics and Robotics With 128 Figures, some in Colour, Springer Prof. Dr.-lng. Wolfgang StraBer Wilhelm-Schickard-lnstitut fur
More informationFacing the Future: Additive Manufacturing SECOND ROUND. Call for Partners: Consortium Study. Our partners:
Facing the Future: Additive Manufacturing SECOND ROUND Call for Partners: Consortium Study Our partners: Additive Manufacturing: The New Industrial Revolution? Motivation Costs for additive manufactured
More informationMICROSCOPE PHOTOMETRY
Horst Piller MICROSCOPE PHOTOMETRY With 79 Figures Springer-Verlag Berlin Heidelberg New York 1977 DR. HORST PILLER C/O Carl Zeiss Postfach 35/36 D-7082 Oberkochen ISBN-13: 978-3-642-66572-1 DOI:IO.10071
More informationStrategic Innovation in Russia
Strategic Innovation in Russia ThiS is a FM Blank Page Taco C.R. van Someren Shuhua van Someren-Wang Strategic Innovation in Russia Towards a Sustainable and Profitable National Innovation System Taco
More informationThe Cultural and Social Foundations of Education. Series Editor A.G. Rud College of Education Washington State University USA
The Cultural and Social Foundations of Education Series Editor A.G. Rud College of Education Washington State University USA The Palgrave Pivot series on the Cultural and Social Foundations of Education
More informationThe International Politics of the Armenian-Azerbaijani Conflict
The International Politics of the Armenian-Azerbaijani Conflict Editor The International Politics of the Armenian-Azerbaijani Conflict The Original Frozen Conflict and European Security Editor Central
More informationBetter Business Regulation in a Risk Society
Better Business Regulation in a Risk Society Alberto Alemanno Frank den Butter André Nijsen Jacopo Torriti Editors Better Business Regulation in a Risk Society Editors Alberto Alemanno Department of Law
More informationPOWERLINK. +++Newsticker+++Newsticker+++Newsticker+++ ETHERNET NEWSLETTER JUNE New EPSG member Kalycito NEWS
LETTER JUNE 2008 /6 a interface +++Newsticker+++Newsticker+++Newsticker+++ New EPSG member Kalycito Kalycito has joined the EPSG in April 2008. Seated in France and India, the young company provides research
More informationPower Sonic and Ultrasonic Transducers Design
Power Sonic and Ultrasonic Transducers Design Power Sonic and Ultrasonic Transducers Design Proceedings of the International Workshop, Held in Lille, France, May 26 and 27, 1987 Editors: B. Hamonic and
More informationAmerican Chemical Society The ACS International Center
American Chemical Society The ACS International Center Introduction American Chemical Society (ACS) ACS Vision: Improving people s lives through the transforming power of chemistry ACS Mission: Advance
More informationPalgrave Studies in the History of Science and Technology
Palgrave Studies in the History of Science and Technology Series Editors James Rodger Fleming Colby College Waterville, Maine, USA Roger D. Launius Smithsonian Institution National Air and Space Museum,
More informationInline process metrology system for the control of laser surface structuring processes
Available online at www.sciencedirect.com Physics Procedia 39 (2012 ) 814 822 LANE 2012 Inline process metrology system for the control of laser surface structuring processes Robert Schmitt a,b, Guilherme
More informationApplied Technology and Innovation Management
Applied Technology and Innovation Management Heinrich Arnold Michael Erner Peter Möckel Christopher Schläffer Editors Applied Technology and Innovation Management Insights and Experiences from an Industry-Leading
More informationRCUK international engagement with Japan
RCUK international engagement with Japan Sophie Laurie Head of International Research Councils UK Strategy Unit Research Councils UK UK Government funded R&D Performing research Higher education institutions
More informationAn overview of the activities of the CNRA* Working Group on Public Communication of Nuclear Regulatory Organisations (WGPC)
NDC Conference on Public Involvement in Siting of Nuclear Facilities OECD Conference Centre, Paris- 15-16 February 2011 An overview of the activities of the CNRA* Working Group on Public Communication
More informationComputer-Aided Production Management
Asbj0rn Rolstadas (Ed.) Computer-Aided Production Management With 169 Figures Springer-Verlag Berlin Heidelberg New York London Paris Tokyo Professor Dr. Asbjern Ro1stadas Production Engineering Laboratory
More informationSpringerBriefs in Applied Sciences and Technology
SpringerBriefs in Applied Sciences and Technology SpringerBriefs present concise summaries of cutting-edge research and practical applications across a wide spectrum of fields. Featuring compact volumes
More informationModeling Manufacturing Systems. From Aggregate Planning to Real-Time Control
Modeling Manufacturing Systems From Aggregate Planning to Real-Time Control Springer-Verlag Berlin Heidelberg GmbH Paolo Brandimarte. Agostino Villa (Eds.) Modeling Manufacturing Systems From Aggregate
More informationLecture Notes in Business Information Processing 326
Lecture Notes in Business Information Processing 326 Series Editors Wil M. P. van der Aalst RWTH Aachen University, Aachen, Germany John Mylopoulos University of Trento, Trento, Italy Michael Rosemann
More information5 International OFDM-Workshop. Hamburg. September 12 th and 13 th 2000 at the Hotel Hafen Hamburg in Hamburg, Germany
th 5 International OFDM-Workshop in Hamburg September 12 th and 13 th 2000 at the Hotel Hafen Hamburg in Hamburg, Germany Technical University of Hamburg-Harburg Department of Telecommunications Prof.
More information2015 IEEE High Power Diode Lasers and Systems Conference (HPD 2015)
2015 IEEE High Power Diode Lasers and Systems Conference (HPD 2015) Coventry, United Kingdom 14-15 October 2015 IEEE Catalog Number: ISBN: CFP1571I-POD 978-1-4673-9179-5 Copyright 2015 by the Institute
More informationSurface Mining Machines
Surface Mining Machines Eugeniusz Rusiński Jerzy Czmochowski Przemysław Moczko Damian Pietrusiak Surface Mining Machines Problems of Maintenance and Modernization 123 Eugeniusz Rusiński Faculty of Mechanical
More informationSimulation by Bondgraphs
Jean U. Thoma Simulation by Bondgraphs Introduction to a Graphical Method Springer-Verlag Berlin Heidelberg New York London Paris Tokyo Hong Kong 1990 Professor Dr. Jean Ulrich Thoma Dept. of Mechanical
More informationNeutron Scattering Applications and Techniques
Neutron Scattering Applications and Techniques Series editors Ian S. Anderson, Oak Ridge National Laboratory, Oak Ridge, TN, USA Alan J. Hurd, Los Alamos National Laboratory, Los Alamos, NM, USA Robert
More informationLecture Notes in Applied and Computational Mechanics
Lecture Notes in Applied and Computational Mechanics Volume 28 Series Editors Prof. Dr.-Ing. Friedrich Pfeiffer Prof. Dr.-Ing. Peter Wriggers Lecture Notes in Applied and Computational Mechanics Edited
More informationSpringerBriefs in Astronomy
SpringerBriefs in Astronomy Series editors Martin Ratcliffe Valley Center, Kansas, USA Wolfgang Hillebrandt MPI für Astrophysik, Garching, Germany Michael Inglis Suffolk County Community College, New York,
More informationDrones and Unmanned Aerial Systems
Drones and Unmanned Aerial Systems Aleš Završnik Editor Drones and Unmanned Aerial Systems Legal and Social Implications for Security and Surveillance 2123 Editor Aleš Završnik Institute of Criminology
More informationJoint Declaration of Intent. of the Ministry of Economy, Trade and Industry of Japan, the Ministry of Internal Affairs and Communications of Japan
Joint Declaration of Intent of the Ministry of Economy, Trade and Industry of Japan, the Ministry of Internal Affairs and Communications of Japan and the Federal Ministry for Economic Affairs and Energy
More informationRisk-Based Ship Design
Risk-Based Ship Design Apostolos Papanikolaou (Ed.) Risk-Based Ship Design Methods, Tools and Applications Authored by Carlos Guedes Soares, Andrzej Jasionowski, Jørgen Jensen, Dag McGeorge, Apostolos
More informationHuman-Computer Interaction Series
Human-Computer Interaction Series Editors-in-Chief John Karat Jean Vanderdonckt, Université Catholique de Louvain, Belgium Editorial Board Simone Barbosa, PUC-Rio, Brazil Gaëlle Calvary, LIG-University
More informationCross-Industry Innovation Processes
Cross-Industry Innovation Processes Tobias Hahn Cross-Industry Innovation Processes Strategic Implications for Telecommunication Companies Preface by Prof. Dr. Rüdiger Zarnekow Tobias Hahn Bonn, Germany
More informationDISCOVERING MARKETS WITH THE HELP OF CITIZENS FRAUNHOFER S PARTICIPATORY METHODOLOGY
DISCOVERING MARKETS WITH THE HELP OF CITIZENS FRAUNHOFER S PARTICIPATORY METHODOLOGY Gender Summit North-America Washington, November, 14 th 2013 Martina Schraudner Fraunhofer-Gesellschaft Die Fraunhofer-Gesellschaft
More informationLandeshauptstadt München Oberbürgermeister. Dieter Reiter
Landeshauptstadt München Oberbürgermeister Dieter Reiter XIV: Munich Economic Summit - "Innovation and Competitiveness: The Quest for the Best" Welcome Address, 21. Mai/12.00 Uhr, Hotel Bayerischer Hof,
More informationTHE EUROPEAN COUNCIL OF ACADEMIES OF APPLIED SCIENCES, TECHNOLOGIES AND ENGINEERING
THE EUROPEAN COUNCIL OF ACADEMIES OF APPLIED SCIENCES, TECHNOLOGIES AND ENGINEERING Presentation to the CAETS Council Meeting Beijing, June 4, 2014 Jacques Lukasik, Euro-CASE Secretary General Fellow of
More information» Facing the Smart Future «
Industrie 4.0 Internet of Things» Facing the Smart Future «Smart Products, Production and Services Internet of Services Industrial Internet Digital Manufacturing Call for Partners: Consortium Study Our
More informationINTERNATIONAL JOINT MARKET AND TECHNOLOGY STUDY
in cooperation with INTERNATIONAL JOINT MARKET AND TECHNOLOGY STUDY ENERGY STORAGE SYSTEMS Markets and market potentials Technologies and their readiness System configurations, components, materials Applications
More informationLecture Notes in Control and Information Sciences
Lecture Notes in Control and Information Sciences Edited by A.V. Balakrishnan and M. Thoma 55 Ganti Prasada Rao Piecewise Constant Orthogonal Functions and Their Application to Systems and Control III
More informationAdvances in Modern Tourism Research
Advances in Modern Tourism Research Álvaro Matias Peter Nijkamp Paulo Neto (Eds.) Advances in Modern Tourism Research Economic Perspectives With 26 Figures and 65 Tables Prof. Dr. Álvaro Matias University
More informationMATLAB Guide to Finite Elements
MATLAB Guide to Finite Elements Peter I. Kattan MATLAB Guide to Finite Elements An Interactive Approach Second Edition With 108 Figures and 25 Tables Peter I. Kattan, PhD P.O. BOX 1392 Amman 11118 Jordan
More informationSpringer Series on. Signals and Communication Technology
Springer Series on Signals and Communication Technology Signals and Communication Technology Functional Structures in Networks AMLn A Language for Model Driven Development of Telecom Systems T. Muth ISBN
More informationUnitary patent & Unified Patent Court
Unitary patent & Unified Patent Court Roadshow for professional representatives Programme 13 July 2016 London, United-Kingdom European Patent Institute Education and Training section Supported by the EPO
More informationDynamics of Fibre Formation and Processing
Dynamics of Fibre Formation and Processing Roland Beyreuther Harald Brünig Dynamics of Fibre Formation and Processing Modelling and Application in Fibre and Textile Industry With 171 Figures 123 Prof.
More information~ SpringcrWienNcwYork
~ SpringcrWienNcwYork Sabine Seymour Fashionable Technology The Intersection of Design, Fashion, Science, and Technology Fashionable Technology The Intersection of Design, Fashion, Science, and Technology
More informationComputational Social Sciences
A series of authored and edited monographs that utilize quantitative and computational methods to model, analyze and interpret large-scale social phenomena. Titles within the series contain methods and
More informationFaculty Vitae. 1. Name: Dr. Sergey V. Zykov
Faculty Vitae 1. Name: Dr. Sergey V. Zykov 2. Education MSc., Comp.Sci., Moscow Engineering Physics Institute, 1994 PhD., Comp.Sci., Moscow Engineering Physics Institute, 2000 Assoc.Prof., Cryptology &
More informationRecommended code of good practice for the interpretation of Directive 2006/42/EC on machinery concerning air handling units Second Edition
Eurovent Industry Recommendation / Code of Good Practice Eurovent 6/2-2015 Recommended code of good practice for the interpretation of Directive 2006/42/EC on machinery concerning air handling units Second
More informationThink Ergonomics. The Silent Revolution. From Stand to Key Player
Think Ergonomics The Silent Revolution From Stand to Key Player Sewing operations / facility around 1930 when ergonomics was still in its infancy. Modern sewing operation. At the start of the new millennium,
More informationLecture Notes in Computer Science
Lecture Notes in Computer Science Edited by G. Goos and J. Hartmanis 284 A. KSndig R.E. BShrer J. D&hler (Eds.) Embedded Systems New Approaches to Their Formal Description and Design An Advanced Course
More informationLecture Notes in Control and Information Sciences 283. Editors: M. Thoma M. Morari
Lecture Notes in Control and Information Sciences 283 Editors: M. Thoma M. Morari Springer Berlin Heidelberg NewYork Barcelona Hong Kong London Milan Paris Tokyo Christopher Fielding, Andras Varga, Samir
More informationAdvanced galvo control enables efficient laser micro processing
9th International Conference on Photonic Technologies LANE 2016 Industrial Paper Advanced galvo control enables efficient laser micro processing Dr. Christoph J. Wienken a, *, Dr. Alois Unterholzner a,
More informationACTIVITY REPORT OF THE NATIONAL INDUSTRIAL COMPETITIVENESS COMMISSION PRAMONĖ 4.0 OF 2017
ACTIVITY REPORT OF THE NATIONAL INDUSTRIAL COMPETITIVENESS COMMISSION PRAMONĖ 4.0 OF 2017 23 April 2018 Vilnius 2 I. Introduction On 19 April 2016, The European Commission (hereinafter referred to as the
More informationProvided by. RESEARCH ON INTERNATIONAL MARKETS We deliver the facts you make the decisions
Provided by RESEARCH ON INTERNATIONAL MARKETS March 2014 PREFACE Market reports by ystats.com inform top managers about recent market trends and assist with strategic company decisions. A list of advantages
More informationStudies in Empirical Economics
Studies in Empirical Economics Aman Ullah (Ed.) Semiparametric and Nonparametric Econometrics 1989. VII, 172 pp. Hard cover DM 120, ISBN 3-7908-0418-5 Walter Kramer (Ed.) Econometrics of Structural Change
More informationAustrian Excellence Center for Tribology
Austrian Excellence Center for Tribology AC2T research GmbH Welcome in the world of friction, wear and lubrication research Copyright AC2T research GmbH 2017. All rights reserved. Reproduction of any material,
More informationAkzoNobel Aerospace Coatings. Global Training Program
AkzoNobel Aerospace Coatings Global Training Program Global Training Program AkzoNobel Aerospace Coatings believes in partnering with customers. We promote and strengthen these partnerships by offering
More information3 Forensic Science Progress
3 Forensic Science Progress Forensic Science Progress Volume 3 With Contributions by C. A. Pounds, R. N. Smith With 19 Figures and 7 Tables Springer-Verlag Berlin Heidelberg New York London Paris Tokyo
More informationNature makes polysaccharides, EPNOE turns them into products
N 26 - DECEMBRE 2013 Nature makes polysaccharides, EPNOE turns them into products D ear Readers of the, 2013 was a very active year for EPNOE. In January, the book "The European Polysaccharide Network
More informationPrivate Equity to us does not solely consist of preparing tailor-made acquisition, financing and exit structures, as well as developing and negotiatin
Private Equity to us does not solely consist of preparing tailor-made acquisition, financing and exit structures, as well as developing and negotiating, e.g., joint venture, purchase and participation
More informationCognitive Systems Monographs
Cognitive Systems Monographs Volume 9 Editors: Rüdiger Dillmann Yoshihiko Nakamura Stefan Schaal David Vernon Heiko Hamann Space-Time Continuous Models of Swarm Robotic Systems Supporting Global-to-Local
More informationStudies in Economic Ethics and Philosophy
Studies in Economic Ethics and Philosophy Series Editor Peter Koslowski Editorial Board F. Neil Brady George Brenkert Geoffrey Brennan James M. Buchanan Thomas Donaldson Richard De George Jon Elster Amitai
More informationDVT Research Group A joint research group between Ilmenau University of Technology and Fraunhofer Institute for Integrated Circuits IIS
DVT Research Group A joint research group between Ilmenau University of Technology and Fraunhofer Institute for Integrated Circuits IIS Ilmenau, November 12th, 2014 Prof. Giovanni Del Galdo The DVT Research
More informationSpringerBriefs in Electrical and Computer Engineering
SpringerBriefs in Electrical and Computer Engineering More information about this series at http://www.springer.com/series/10059 David Fouto Nuno Paulino Design of Low Power and Low Area Passive Sigma
More informationHigher School of Economics, Vienna
Open innovation and global networks - Symposium on Transatlantic EU-U.S. Cooperation on Innovation and Technology Transfer 22nd of March 2011 - Dr. Dirk Meissner Deputy Head and Research Professor Research
More informationService Innovation, Engineering and Management. Short Description of the Proposed Track
Service Innovation, Engineering and Management Short Description of the Proposed Track Digitization is a strong driver for service-centric value creation and the proliferation of service-centric IT infrastructure.
More informationMulti-Disciplinary Engineering for Cyber-Physical Production Systems
Multi-Disciplinary Engineering for Cyber-Physical Production Systems Stefan Biffl Arndt LRuder Detlef Gerhard Editors Multi-Disciplinary Engineering for Cyber-Physical Production Systems Data Models and
More informationVehicle Fiber-Optics and Photonics Conference
International Conference on Vehicle Fiber-Optics and Photonics Conference,, https://optics-photonics.conferenceseries.com/ In vitati on Dear Attendees, We are glad to announce the International Conference
More informationManagement and Industrial Engineering. Series editor J. Paulo Davim, Aveiro, Portugal
Management and Industrial Engineering Series editor J. Paulo Davim, Aveiro, Portugal More information about this series at http://www.springer.com/series/11690 J. Paulo Davim Editor Progress in Lean Manufacturing
More informationDr. Eberhard Bessey. Daimler AG Group Research and Advanced Engineering (GR&AE)
Dr. Eberhard Bessey Daimler AG Group Research and Advanced Engineering (GR&AE) Group Research Product Innovations and Process Technologies - Materials Manufacturing Concepts (GR/PM) Senior Manager Technology
More information