Capability Presentation. Enhanced Production optimisation and asset monitoring SUT 2018 November. Kevin Glanville Design & Development Manager

Transcription

1 Capability Presentation Enhanced Production optimisation and asset monitoring SUT 2018 November Kevin Glanville Design & Development Manager Subsea Communications & Integrated Sensors 1

2 Agenda 1. Opportunity & Challenges 2. Subsea system 3. Integration subsea 4. Integration topside 5. Aging assets 6. Conclusion 2

3 Industry demand / opportunities for digitisation Environmental: - Improved technology to reduce emissions and discharged fluids coupled with decommissioning of older assets; Efficiency: - The industry continues to strive to improve production efficiency in a climate of lower oil prices; technology can play its part Aging Assets: - opportunities for production optimisation, field extensions With over 80% of world energy use reliant on fossil fuels the maintenance and optimisation of these often aging subsea assets is an economic and moral necessity for the industry. 3

4 Key challenges faced by existing fields Performance limitations of existing technology; Ability to support / integrate advanced instrumentation & standards [IWIS/SIIS] Limited diagnostics to support / maintain and optimise existing system Open System; Ageing electronics / technology limiting options Proprietary interfaces / protocols limiting options Ability to support new technology System reaching original design life limits; Increased risk of unscheduled shutdowns Higher maintenance costs Requirement to provide additional system / asset integrity monitoring 4

5 Subsea instrumentation / Devices New instrumentation Multiphase meters Sand detectors Corrosion monitoring Leakage detection systems Expert diagnosis systems Video surveillance 4D seismology Intelligent Well instrumentation Higher bandwidth Open interfaces Instrument Pressure and temperature Flow meters Sand detectors Corrosion monitoring systems Vibration monitoring devices Subsea cameras Acoustic monitoring systems Valve / Injector Actuators Relative bandwidth requirement (min / max) Low Low/Medium (Even High for some applications) Low/Medium Low/Medium Medium/High High Medium Low 5

6 Umbilical Typical Subsea Production / Data System Subsea Control / Data modules: - provides control and monitoring of production system including provision of instrument interfaces; Host Facility DCS / ICSS Proserv SPCS Control Logic (Interfaced) EPU Infield Umbilical(s) and Distribution: - facilitates the required field power and communication distribution requirements; MCS / EPU: - providing system power, functional logic and integration to installation control and data systems; TUTU Topside Subsea MCS Limits Single Channel depicted for clarity SDU A Modem Modem Modem Modem Modem Modem Modem Modem 6

7 Standardisation of Subsea interfaces Intelligent Well Interface Standardisation (IWIS): - assisting the integration of down hole power, communication and control systems. Subsea Instrument Interface Standardisation (SIIS): - industry JIP which developed an open standard to provide compliant interfaces for device integration into the control system. SEAFOM : - Joint Industry Forum aimed at promoting the growth of fibre optic monitoring system installations in the upstream oil and gas industry. Subsea Wireless Group (SWiG): - industry network promoting interoperability for subsea wireless communications (radio frequency, acoustic, free-space optic, inductive power, hybrid).

8 Umbilical Standardisation of Subsea interfaces - IWIS Concept of IWIS: - to provide a transparent interface between IWE and topside vendor application; IWE Down hole vendor application / interface Well Pressure / Temperature monitoring; Subsea Controls MCS / DCS Intelligent well control; SEM IWE isem housing or electronics in SEM Subsea Tree / Process Sensors & Actuators Intelligent Well Equipment Sensors & Actuators

9 SIIS L2 topology Provides subsea mateable interfaces from subsea control systems which do not have to be predefined in terms of the instrumentation to which they will subsequently be attached. The communication protocol is CANopen (CiA 443) over an ISO (fault tolerant) physical layer [default bit-rate 50kbit/s]. SEM SEM MB SIIS level 2 supports multi-measurand devices that can be distributed on a multidropped star topology Inbuilt CAN node self detect and configuration; Diagnostic data tunnel access to the device layer MB Basic CANopen interface configurations 9

10 SIIS L2 interfaces SIIS level 2 architecture, providing transparent access to subsea devices 10

11 Umbilical Standardisation of Subsea interfaces - SIIS Concept of SIIS: - to provide options for device interfacing and integration into the SPCS; Subsea Controls MCS / DCS CANopen Service Console [CiA 309-3] Array of process instruments e.g. Pressure / Temperature monitoring; Specialist process and condition monitoring devices; Could future instruments / devices be more interactive? Would the existing defined SIIS interfaces suffice.. room for an L4? SEM Subsea Tree / Process Sensors & Actuators SIIS instrument interfaces SIIS L1 [4-20mA] SIIS L2 [CANopen] SIIS L3 [Ethernet] SIIS L4 [???] 11

12 OPC-UA Interoperability OPC-UA interoperability OPC UA provides an information model framework, which can expose vendor defined information in a standard way. Importantly, all OPC UA clients are expected to be able to discover and use vendor defined information. Subsea Vendor DCS Vendor or other OPC-UA Client System Implementation / configuration nodeset file The MDIS specification is an example of an OPC UA Information Model designed to meet the needs of developers and users in the offshore oil and gas industry.

13 MDIS OPC-UA Objects Choke example MDIS OPC UA Objects Choke example The object properties and behaviour is specified in the MDIS specification. The protocol is open and tools to test and verify is available. It shall be easy and cost effective to integrate and test a DCS and MCS system in near future.

14 Topside Control / Monitoring Interface Platform Control System Subsea Vendor Topside Interface: - Vendor specific control / communication logic; 3 rd Party data / maintenance system integration; Subsea power and communication provision / management; Topside (DCS) hardware / topside integration; Subsea LAN TPCU Rack Subsea Vendor Protocol / Media Modbus TCP / Other Emerging: - OPC UA / MDIS Proserv Subsea Gateway / controller(s) Tiacs Local or Remote data view / analysis / archiving Data Logger Tiacs Protocol Emulation Tiacs Archiver Web Server Web Server Server Client 21 Proserv HUB Proserv 14

15 Subsea / Topside communication technologies Umbilical s the data highways of subsea.. Providing a range of power (AC / DC) and communication technologies (Fibre Optic, powerline); in addition to the chemical / hydraulic subsea requirements for production control systems; Umbilical-less based solutions using wireless technologies supporting requirements for control, monitoring and positioning applications. 15

16 4 4 Aging assets realising opportunities of digitisation With in excess of 4500 subsea wells globally the potential exists for digitisation to enhance maintenance and performance. Key technology for connecting creating instrument / Surveillance / data networks: - Fibre Optic; generally new developments; Powerline; CoP or CaP; limitations of bandwidth can be addressed by co-exist technologies; Wireless; secondary controls eg BoP Aker SPCTU 440 VAC Troll C PLATFORM Tiacs Data Logger Tiacs Protocol Emulation Tiacs Archiver TPCU (LIR) Ethernet SeaHawk Server Server Client 21 Quad from topside to subsea 6 mm^2 Approx. 3344m Troll C SUBSEA FIELD Power Line Co-exist with Aker 4 El. Actuator 4 1pair: <500VAC + Power Line 1pair: Communication to SUTU MCM Aker Aker Aker 7 48VDC, max. 200W + RS485 Modbus RTU VAC, Max 120W + Ethernet rev OCH SeaHawk SeaHawk - not SOW (spare connection) 16

17 Incorporating digitisation into existing / aging fields Platform Control System Local or Remote data view / analysis / archiving Modbus or Proprietary Emerging: - OPC UA / MDIS Modbus TCP MCS HMI 3 rd party Data interfaces Legacy serial modems Proprietary Protocol Controller(s) EPU Subsea Power Transparent protocol Proserv Subsea Gateway / controller(s) Subsea LAN TPCU Rack Server Client Tiacs 21 Data Logger Tiacs Protocol Emulation Tiacs Archiver Combined Power & Signal Web Server Web Server Web Server Legacy Legacy UPGRADED Proserv HUB Proserv 17

18 Subsea Future Technology Use technology available to retrieve, relate and analyse data. Data logging of subsea data Condition/health monitoring Performance optimization Predict maintenance and improvement Reporting and data aggregation Utilizing machine learning to optimize production for our customers. With the data and our know how, we only need to train the computers to help! 18

19 Conclusion Standardisation; in recent years the industry has developed subsea and topside standards delivering open and interoperability; it may be required to develop these further to provide greater interoperability etc Technology; exists to enhance production and address the demands of aging and environmentally located systems; specifically co-exist / wireless to overcome limitations when enhancing / extending existing infrastructure functionality. Digital future; as with other industries the benefits of digitisation such as operational efficiency, safety and improved system visibility are tangible however, the industry must engage and manage to reap the maximum benefits in a competitive environment. 19

20 Thank You Any Questions? Kevin Glanville, Design & Development Mgr, Proserv 20